| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Nothing too thrilling here, but we see lots of driver updates and bug
fixes, including quirk additions and refactoring works, while there
have been little changes in the core functionality. Here are some
highlights:
Core:
- Add validation for the control API put callback
- Fixes in compress-offload API timestamp handling
- Continued ASoC core API cleanups
ASoC:
- Add support for bus keepers (for Apple devices in future)
- Enhancements to the SDCA support, including retaskable jacks
- Test improvements for Cirrus Logic drivers
- Lots of fixes for the NXP, nVidia and Qualcomm
- Support for AMD RPL DMIC, Cirrus Logic CS42L43 and CS47L47, nVidia
machines with CPCAP and WM8962
USB-audio:
- Quirks for Huawei Headset, Focusrite Novation, MV-Silicon, Studio
1824, Arturia AF16Rig, Hotone Audio, Feaulle Rainbow, PreSonus
AudioBox, Moondrop Ju Jiu, Scarlett 18i20, etc
- Extended mixer volume quirk handling
- UAF and other fixes for us144mkii, 6fire and caiaq drivers
HD-audio:
- Add quirks or fixes for Acer, Lenovo, HP, ASUS machines
- Fixes & cleanups of GPIO helper code
Misc:
- Add suspend/resume support for multiple legacy ISA and Apple
drivers
- Further regression fixes for ctxfi driver"
* tag 'sound-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (359 commits)
ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()
ALSA: usb-audio: Fix missing error handling for get_min_max*()
ALSA: hda/realtek - fixed speaker no sound update
ALSA: hda/realtek: Add quirk for Acer PT316-51S headset mic
ALSA: usb-audio: Exclude Scarlett 18i20 1st Gen from SKIP_IFACE_SETUP
ALSA: hda/realtek: Add quirk for Legion S7 15IMH
ALSA: hda/realtek: Add quirk for HP Spectre x360 14-ea
ALSA: caiaq: take a reference on the USB device in create_card()
ASoC: dt-bindings: rockchip: convert rk3399-gru-sound to DT Schema
ALSA: sscape: Add suspend and resume support
ALSA: sscape: Cache per-card resources for board reinitialization
ALSA: usb-audio: Do not expose sticky mixers
ALSA: usb-audio: Move volume control resolution check into a function
ALSA: usb-audio: Add error checks against get_min_max*()
ALSA: usb-audio: Add quirk for PreSonus AudioBox USB
ALSA: interwave: guard PM-only restore helpers with CONFIG_PM
ALSA: usb-audio: Evaluate packsize caps at the right place
ALSA: sc6000: Restore board setup across suspend
ALSA: sc6000: Keep the programmed board state in card-private data
ALSA: 6fire: fix use-after-free on disconnect
...
|
|
Addresses two issues in the TH1520 AON firmware protocol driver:
1. Fix a potential buffer overflow where the code used unsafe pointer
arithmetic to access the 'mode' field through the 'resource' pointer
with an offset. This was flagged by Smatch static checker as:
"buffer overflow 'data' 2 <= 3"
2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard
kernel endianness conversion macros (cpu_to_be16, etc.) for better
portability and maintainability.
The functionality was re-tested with the GPU power-up sequence,
confirming the GPU powers up correctly and the driver probes
successfully.
[ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware
powervr/rogue_36.52.104.182_v1.fw
[ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build
6645434 OS)
[ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on
minor 0
Fixes: e4b3cbd840e5 ("firmware: thead: Add AON firmware protocol driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/17a0ccce-060b-4b9d-a3c4-8d5d5823b1c9@stanley.mountain/
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Drew Fustini <fustini@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Linus Walleij <linusw@kernel.org> says:
After a quick look and test-compile I can determine that
all of these drivers include <linux/gpio.h> for no reason
whatsoever, so fixing it is low hanging fruit.
Link: https://patch.msgid.link/20260314-asoc-amd-v1-0-31afed06e022@kernel.org
|
|
In the current implementation, SVC client drivers such as socfpga-hwmon,
intel_fcs, stratix10-soc, stratix10-rsu each send an SMC command that
triggers a single thread in the stratix10-svc driver. Upon receiving a
callback, the initiating client driver sends a stratix10-svc-done signal,
terminating the thread without waiting for other pending SMC commands to
complete. This leads to a timeout issue in the firmware SVC mailbox service
when multiple client drivers send SMC commands concurrently.
To resolve this issue, a dedicated thread is now created per channel. The
stratix10-svc driver will support up to the number of channels defined by
SVC_NUM_CHANNEL. Thread synchronization is handled using a mutex to prevent
simultaneous issuance of SMC commands by multiple threads.
SVC_NUM_DATA_IN_FIFO is reduced from 32 to 8, since each channel now has
its own dedicated FIFO and the SDM processes commands one at a time.
8 entries per channel is sufficient while keeping the total aggregate
capacity the same (4 channels x 8 = 32 entries).
Additionally, a thread task is now validated before invoking kthread_stop
when the user aborts, ensuring safe termination.
Timeout values have also been adjusted to accommodate the increased load
from concurrent client driver activity.
Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ang Tien Sung <tien.sung.ang@altera.com>
Signed-off-by: Fong, Yan Kei <yankei.fong@altera.com>
Signed-off-by: Muhammad Amirul Asyraf Mohamad Jamian <muhammad.amirul.asyraf.mohamad.jamian@altera.com>
Link: https://lore.kernel.org/all/20260305093151.2678-1-muhammad.amirul.asyraf.mohamad.jamian@altera.com
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
For some parts, the DSP is kept running when in low power mode
(hibernation), leaving the firmware ALSA controls enabled, but the
registers are inaccessible. Attempts to access volatile firmware
controls whilst in this state would produce errors in the kernel log
due to a regmap_raw_read() into DSP registers whilst the regmap is in
cache_only.
To remove this error log, add a hibernating flag to indicate that the
controls are inaccessible, so we no longer try to read or write to the
registers whilst the regmap is in cache_only.
This would still produce an error when trying to read or write to these
controls, but this would be a different error (-EPERM instead of
-EBUSY), and would not produce a spurious error log in the kernel.
Upon wake from hibernation, the control caches are re-synced to the
hardware, if the DSP is running.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20260224161821.93365-2-sbinding@opensource.cirrus.com
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All the functions operating on the 'handle' pointer are claiming it is a
pointer to const thus they should not modify the handle. In fact that's
a false statement, because first thing these functions do is drop the
cast to const with container_of:
struct acpm_info *acpm = handle_to_acpm_info(handle);
And with such cast the handle is easily writable with simple:
acpm->handle.ops.pmic_ops.read_reg = NULL;
The code is not correct logically, either, because functions like
acpm_get_by_node() and acpm_handle_put() are meant to modify the handle
reference counting, thus they must modify the handle. Modification here
happens anyway, even if the reference counting is stored in the
container which the handle is part of.
The code does not have actual visible bug, but incorrect 'const'
annotations could lead to incorrect compiler decisions.
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260224104203.42950-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
|
|
One of SAI interfaces is connected to AUDMIX in the i.MX952 chip, but
AUDMIX can be bypassed or not bypassed on the i.MX952 platform.
There are three use cases:
1) SAI -> Codec (No AUDMIX between SAI and Codec)
2) SAI -> Codec (Has AUDMIX, but AUDMIX is bypassed)
3) SAI -> AUDMIX -> Codec (Has AUDMIX and used)
So add 'fsl,sai-amix-mode' property for this feature
fsl,sai-amix-mode = "none": is for case 1)
fsl,sai-amix-mode = "bypass": is for case 2)
fsl,sai-amix-mode = "audmix": is for case 3)
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260123082501.4050296-5-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add aes-gcm crypto API's for AMD/Xilinx Versal device.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add API to get SoC version and family info.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For better maintainability move crypto related API's to
new zynqmp-crypto.c file.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Qualcomm remote processor may rely on Static and Dynamic resources for
it to be functional. Static resources are fixed like for example,
memory-mapped addresses required by the subsystem and dynamic
resources, such as shared memory in DDR etc., are determined at
runtime during the boot process.
For most of the Qualcomm SoCs, when run with Gunyah or older QHEE
hypervisor, all the resources whether it is static or dynamic, is
managed by the hypervisor. Dynamic resources if it is present for a
remote processor will always be coming from secure world via SMC call
while static resources may be present in remote processor firmware
binary or it may be coming qcom_scm_pas_get_rsc_table() SMC call along
with dynamic resources.
Some of the remote processor drivers, such as video, GPU, IPA, etc., do
not check whether resources are present in their remote processor
firmware binary. In such cases, the caller of this function should set
input_rt and input_rt_size as NULL and zero respectively. Remoteproc
framework has method to check whether firmware binary contain resources
or not and they should be pass resource table pointer to input_rt and
resource table size to input_rt_size and this will be forwarded to
TrustZone for authentication. TrustZone will then append the dynamic
resources and return the complete resource table in the passed output
buffer.
More about documentation on resource table format can be found in
include/linux/remoteproc.h
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-11-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For memory passed to TrustZone (TZ), it must either be part of a pool
registered with TZ or explicitly registered via SHMbridge SMC calls.
When Gunyah hypervisor is present, PAS SMC calls from Linux running at
EL1 are trapped by Gunyah running @ EL2, which handles SHMbridge
creation for both metadata and remoteproc carveout memory before
invoking the calls to TZ.
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge before invoking PAS SMC
calls. For the auth_and_reset() call, the remoteproc carveout memory
must first be registered with TZ via a SHMbridge SMC call and once
authentication and reset are complete, the SHMbridge memory can be
deregistered.
Introduce qcom_scm_pas_prepare_and_auth_reset(), which sets up the SHM
bridge over the remoteproc carveout memory when Linux operates at EL2.
This behavior is indicated by a new field added to the PAS context data
structure. The function then invokes the auth_and_reset SMC call.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-8-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As a superset of the existing metadata context, the PAS context
structure enables both remoteproc and non-remoteproc subsystems to
better support scenarios where the SoC runs with or without the Gunyah
hypervisor. To reflect this, relevant SCM and metadata functions are
updated to incorporate PAS context awareness and remove metadata context
data structure completely.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-5-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When the Peripheral Authentication Service (PAS) method runs on a SoC
where Linux operates at EL2 (i.e., without the Gunyah hypervisor), the
reset sequences are handled by TrustZone. In such cases, Linux must
perform additional steps before invoking PAS SMC calls, such as creating
a SHM bridge. Therefore, PAS SMC calls require awareness and handling of
these additional steps when Linux runs at EL2.
To support this, there is a need for a data structure that can be
initialized prior to invoking any SMC or MDT functions. This structure
allows those functions to determine whether they are operating in the
presence or absence of the Gunyah hypervisor and behave accordingly.
Currently, remoteproc and non-remoteproc subsystems use different
variants of the MDT loader helper API, primarily due to differences in
metadata context handling. Remoteproc subsystems retain the metadata
context until authentication and reset are completed, while
non-remoteproc subsystems (e.g., video, graphics, IPA, etc.) do not
retain the metadata context and can free it within the
qcom_scm_pas_init() call by passing a NULL context parameter and due to
these differences, it is not possible to extend metadata context
handling to support remoteproc and non remoteproc subsystem use PAS
operations, when Linux operates at EL2.
Add PAS context data structure allocator helper function.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-4-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Peripheral and pas_id refers to unique id for a subsystem and used only
when peripheral authentication service from secure world is utilized.
Lets rename peripheral to pas_id to reflect closer to its meaning.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-3-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add cs_dsp_mock_bin_add_patch_off32(). This is the same as
cs_dsp_mock_bin_add_patch() except that it puts the offset in the
new 32-bit offset field and modifies the block type to indicate
that it uses the long offset.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251231172711.450024-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an argument to cs_dsp_mock_bin_add_raw_block() to pass a 32-bit
offset, and change the type of the existing offset argument to u16.
The cs_dsp_test_bin_error.c test uses cs_dsp_mock_bin_add_raw_block()
so it needs corresponding updates to pass 0 as the 32-bit offset.
Version 1 and 2 of the bin file format had a 16-bit offset on blocks
and the sample rate field of the blocks was not used. Version 3 adds
new block types that change the old sample rate field to be a 32-bit
offset with the old offset currently unused.
cs_dsp_mock_bin_add_raw_block() doesn't attempt to do any magic - its
purpose is to create a raw block exactly as specified by the calling
test code. So the test case can pass a value for both offset fields.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251231172711.450024-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Handle a new type of data block that has a 32-bit offset. These are
identical to the normal blocks except that the offset is now in the
32-bit field that was previously 'sr'.
A new file version of 3 indicates that it is mandatory to process
the long-offset blocks, so that older code without that support will
reject the file.
The original 'sr' field was never used by the driver so it has been
renamed offset32.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251231172711.450024-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series.
The biggest core change is the new allocation of pseudo-devices which
allow the sending of internal commands to a given SCSI target"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (147 commits)
scsi: MAINTAINERS: Add the UFS include directory
scsi: scsi_debug: Support injecting unaligned write errors
scsi: qla2xxx: Fix improper freeing of purex item
scsi: ufs: rockchip: Fix compile error without CONFIG_GPIOLIB
scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify
scsi: ufs: core: Use scsi_device_busy()
scsi: ufs: core: Fix single doorbell mode support
scsi: pm80xx: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedi: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: ibmvscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedf: Add WQ_PERCPU to alloc_workqueue() users
scsi: bnx2fc: Add WQ_PERCPU to alloc_workqueue() users
scsi: be2iscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: message: fusion: Add WQ_PERCPU to alloc_workqueue() users
scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users
scsi: scsi_transport_fc: WQ_PERCPU added to alloc_workqueue users()
scsi: scsi_dh_alua: WQ_PERCPU added to alloc_workqueue() users
scsi: qla2xxx: WQ_PERCPU added to alloc_workqueue() users
scsi: target: sbp: Replace use of system_unbound_wq with system_dfl_wq
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.19
Support for hardware-keymanager v1 support for wrapped keys is introduce
in the ICE driver.
Support for the new Kaanapali mobile platform is added to last-level
cache controller, pd-mapper, and UBWC drivers.
UBWC driver gains support for the Monaco and Glymur platforms.
The PMIC GLINK driver is extended to handle the differences found in
targets where the related firmware runs on the SoCCP.
Support for running on targets without initialized SMEM is provided, by
reworking the SMEM driver to differentiate between "not yet probed" and
"probed but there was no SMEM". An unwanted WARN_ON() that triggered if
clients asked for a SMEM item beyond the currently running system's
limit, was removed, to allow new use cases to gracefully fail on old
targets.
The Qualcomm socinfo driver is extended with support for version 20
through 23 and support for providing version information about more than
32 remote processors. Identifiers for QCS6490 and SM8850 are also added.
Additionally, a number of smaller bug fixes and cleanups in PBS, OCMEM,
GSBI, TZMEM, and MDT-loader are included.
* tag 'qcom-drivers-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits)
soc: qcom: mdt_loader: rename 'firmware' parameter of qcom_mdt_load()
soc: qcom: mdt_loader: merge __qcom_mdt_load() and qcom_mdt_load_no_init()
soc: qcom: socinfo: Add reserve field to support future extension
soc: qcom: socinfo: Add support for new fields in revision 20
dt-bindings: firmware: qcom,scm: Document SCM on Kaanapali SOC
soc: qcom: socinfo: add support to extract more than 32 image versions
soc: qcom: smem: drop the WARN_ON() on SMEM item validation
soc: qcom: ubwc: Add config for Kaanapali
soc: qcom: socinfo: Add SoC ID for QCS6490
dt-bindings: arm: qcom,ids: Add SoC ID for QCS6490
soc: qcom: ice: Add HWKM v1 support for wrapped keys
soc: qcom: smem: better track SMEM uninitialized state
err.h: add INIT_ERR_PTR() macro
soc: qcom: smem: fix hwspinlock resource leak in probe error paths
dt-bindings: soc: qcom,aoss-qmp: Document the Glymur AOSS side channel
dt-bindings: soc: qcom,aoss-qmp: Document the Kaanapali AOSS channel
soc: qcom: ubwc: Add QCS8300 UBWC cfg
dt-bindings: firmware: qcom,scm: Document Glymur scm
soc: qcom: socinfo: Add SM8850 SoC ID
dt-bindings: arm: qcom,ids: Add SoC ID for SM8850
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The architectures supported by this driver have a maximum of 32-bits
of address, so we don't need more than 32-bits to store the length of
control data. Change the length in struct cs_dsp_coeff_ctl to an
unsigned int instead of a size_t. Also make a corresponding trivial
change to wm_adsp.c to prevent a compiler warning.
Tested on x86_64 builds this saves at least 4 bytes per control
(another 4 bytes might be saved if the compiler was inserting padding
to align the size_t).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251124171536.78962-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Stephen Rothwell reports htmldocs warnings when merging char-misc tree:
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:22 This comment
starts with '/**', but isn't a kernel-doc comment.
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:184 Enum value
'COMMAND_HWMON_READTEMP' not described in enum 'stratix10_svc_command_code'
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:184 Enum value
'COMMAND_HWMON_READVOLT' not described in enum 'stratix10_svc_command_code'
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:307 function
parameter 'cb_arg' not described in 'async_callback_t'
Fixes: 4f49088c1625 ("firmware: stratix10-svc: Add definition for voltage and temperature sensor")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251114153920.1c5df700@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-3-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cs_dsp_debugfs_wmfw_read() and cs_dsp_debugfs_bin_read() were identical
except for which struct member they printed. Move all this duplicated
code into a common function cs_dsp_debugfs_string_read().
The check for dsp->booted has been removed because this is redundant.
The two strings are set when the DSP is booted and cleared when the
DSP is powered-down.
Access to the string char * must be protected by the pwr_lock mutex. The
string is passed into cs_dsp_debugfs_string_read() as a pointer to the
char * so that the mutex lock can also be factored out into
cs_dsp_debugfs_string_read().
wmfw_file_name and bin_file_name members of struct cs_dsp have been
changed to const char *. It makes for a better API to pass a const
pointer into cs_dsp_debugfs_string_read().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120130640.1169780-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use correct kernel-doc format to avoid kernel-doc warnings in
nclude/linux/firmware/cirrus/cs_dsp_test_utils.h:
- mark one struct member as private: since the comment says that it is
private
- add ending ':' to struct members where needed
Warning: include/linux/firmware/cirrus/cs_dsp_test_utils.h:30 struct
member 'saw_bus_write' not described in 'cs_dsp_test'
Warning: include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'id' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ver' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'xm_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'xm_size_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ym_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ym_size_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'zm_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'zm_size_words' not described in 'cs_dsp_mock_alg_def'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251104192653.929157-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Integrate Remote System Update(RSU) service commands into the
asynchronous framework for communicating with SDM. This allows the RSU
commands to be processed asynchronously, improving the responsiveness
of the Stratix10 service channel.
The asynchronous framework now supports the following RSU commands:
* COMMAND_RSU_GET_SPT_TABLE
* COMMAND_RSU_STATUS
* COMMAND_RSU_NOTIFY
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Introduce support for asynchronous communication with the Stratix10
service channel. Define new structures to enable asynchronous messaging
with the Secure Device Manager (SDM). Add and remove asynchronous
support for existing channels. Implement initialization and cleanup
routines for the asynchronous framework. Enable sending and polling of
messages to the SDM asynchronously.
The new public functions added are:
- stratix10_svc_add_async_client: Adds a client to the service channel.
- stratix10_svc_remove_async_client: Removes an asynchronous client from
the service channel.
- stratix10_svc_async_send: Sends an asynchronous message to the SDM
mailbox in EL3 secure firmware.
- stratix10_svc_async_poll: Polls the status of an asynchronous service
request in EL3 secure firmware.
- stratix10_svc_async_done: Marks an asynchronous transaction as
complete and frees up the resources.
These changes enhance the functionality of the Stratix10 service channel
by allowing for more efficient and flexible communication with the
firmware.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add entry in Stratix 10 Service Layer to support temperature and voltage
sensor.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
- Add APIs for UFS PHY initialization.
- Verify M-PHY TX-RX configuration readiness.
- Confirm SRAM initialization and Set SRAM bypass.
- Retrieve UFS calibration values.
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-4-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for a generic ioctl read/write interface using which users
can request firmware to perform read/write operations on a protected and
secure address space.
The functionality is introduced through the means of two new IOCTL IDs
which extend the existing PM_IOCTL EEMI API:
- IOCTL_READ_REG
- IOCTL_MASK_WRITE_REG
The caller only passes the node id of the given device and an offset.
The base address is not exposed to the caller and internally retrieved
by the firmware. Firmware will enforce an access policy on the incoming
read/write request.
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-3-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Provide empty method for devm_acpm_get_by_node() if we aren't
building in the CONFIG_EXYNOS_ACPM_PROTOCOL. This allows to
test-build the CONFIG_EXYNOS_ACPM_CLK code.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510211905.RgfWkgss-lkp@intel.com/
Fixes: 40498a742053 ("clk: samsung: add Exynos ACPM clock driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20251021-fix-acpm-clk-build-test-v1-1-236a3d6db7f5@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add ACPM DVFS protocol handler. It constructs DVFS messages that
the APM firmware can understand.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-2-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Fix kernel-doc warnings by using correct kernel-doc syntax and
formatting to prevent warnings:
Warning: include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_STATIC' not described in enum 'qcom_tzmem_policy'
Warning: ../include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_MULTIPLIER' not described in enum 'qcom_tzmem_policy'
Warning: ../include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_ON_DEMAND' not described in enum 'qcom_tzmem_policy'
Fixes: 84f5a7b67b61 ("firmware: qcom: add a dedicated TrustZone buffer allocator")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20251017191323.1820167-1-rdunlap@infradead.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
soc/drivers
arm64: Xilinx SOC changes for 6.18
firmware:
- Add debugfs interface
- Wire versal-net compatible string
- Change SOC family detection
* tag 'zynqmp-soc-for-6.18' of https://github.com/Xilinx/linux-xlnx:
drivers: firmware: xilinx: Switch to new family code in zynqmp_pm_get_family_info()
drivers: firmware: xilinx: Add unique family code for all platforms
firmware: xilinx: Add Versal NET platform compatible string
firmware: xilinx: Add debugfs support for PM_GET_NODE_STATUS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
Qualcomm TEE (QTEE) hosts Trusted Applications (TAs) and services in
the secure world, accessed via objects. A QTEE client can invoke these
objects to request services. Similarly, QTEE can request services from
the nonsecure world using objects exported to the secure world.
Add low-level primitives to facilitate the invocation of objects hosted
in QTEE, as well as those hosted in the nonsecure world.
If support for object invocation is available, the qcom_scm allocates
a dedicated child platform device. The driver for this device communicates
with QTEE using low-level primitives.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-2-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Anyone with access to contiguous physical memory should be able to
share memory with QTEE using shm_bridge.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Reviewed-by: Kuldeep Singh <quic_kuldsing@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-1-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
To ensure successful builds when CONFIG_IMX_SCMI_CPU_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_cpu_start()
- scmi_imx_cpu_started()
- scmi_imx_cpu_reset_vector_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
Fixes: 1055faa5d660 ("firmware: imx: Add i.MX95 SCMI CPU driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
To ensure successful builds when CONFIG_IMX_SCMI_LMM_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_lmm_operation()
- scmi_imx_lmm_info()
- scmi_imx_lmm_reset_vector_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
Fixes: 7242bbf418f0 ("firmware: imx: Add i.MX95 SCMI LMM driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
To ensure successful builds when CONFIG_IMX_SCMI_MISC_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_misc_ctrl_get()
- scmi_imx_misc_ctrl_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
This patch also drops the changes in commit 540c830212ed ("firmware: imx:
remove duplicate scmi_imx_misc_ctrl_get()").
The original change aimed to simplify the handling of optional features by
removing conditional stubs. However, the use of conditional stubs is
necessary when CONFIG_IMX_SCMI_MISC_DRV is n, while consumer driver is
set to y.
This is not a matter of preserving legacy patterns, but rather to ensure
that there is no link error whether for module or built-in.
Fixes: 0b4f8a68b292 ("firmware: imx: Add i.MX95 MISC driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
zynqmp_pm_get_family_info()
Currently, the family code and subfamily code are derived from the
PMC_TAP_IDCODE register. Versal, Versal NET share the same family
code. Also some platforms share the same subfamily code, making it
difficult to distinguish between platforms. Update
zynqmp_pm_get_family_info() to use IDs derived from the compatible
string instead of silicon ID codes derived from PMC_TAP_IDCODE register.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20250701123851.1314531-4-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
The family code is currently derived from the PMC_TAP_IDCODE register
value, but there are issues where Versal, Versal NET, and future
platforms share the same family code. Additionally for some platforms
have identical subfamily code, making it challenging to differentiate
between platforms based on the family and subfamily codes. To resolve
this, a new family code member is added to the platform data, initialized
with unique values. This change enables better platform distinction via
the compatible string.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20250701123851.1314531-3-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Add new debug interface to support PM_GET_NODE_STATUS to get the node
information like requirements and usage.
The debugfs firmware driver interface is only meant for testing and
debugging EEMI APIs. Hence, it is by-default disabled in production
systems.
Signed-off-by: Madhav Bhatt <madhav.bhatt@amd.com>
Link: https://lore.kernel.org/r/20250417094543.3873507-1-madhav.bhatt@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Leave powered-on genpds on until ->sync_state() or late_initcall_sync
- Export a common ->sync_state() helper for genpd providers
- Add generic ->sync_state() support
- Add a bus/driver for genpd provider-devices
- Introduce dev_pm_genpd_is_on() for consumers
pmdomain providers:
- cpuidle-psci: Drop redundant ->sync_state() support
- cpuidle-riscv-sbi: Drop redundant ->sync_state() support
- imx: Set ISI panic write for imx8m-blk-ctrl
- qcom: Add support for Glymur and Milos RPMh power-domains
- qcom: Use of_genpd_sync_state() for power-domains
- rockchip: Add support for the RK3528 variant
- samsung: Fix splash-screen handover by enforcing a ->sync_state()
- sunxi: Add support for Allwinner A523's PCK600 power-controller
- tegra: Opt-out from genpd's common ->sync_state() support for pmc
- thead: Instantiate a GPU power sequencer via the auxiliary bus
- renesas: Move init to postcore_initcalls
- xilinx: Move ->sync_state() support to firmware driver
- xilinx: Use of_genpd_sync_state() for power-domains
pmdomain consumers:
- remoteproc: imx_rproc: Fixup the detect/attach procedure for
pre-booted cores"
* tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (44 commits)
pmdomain: qcom: rpmhpd: Add Glymur RPMh Power Domains
dt-bindings: power: rpmpd: Add Glymur power domains
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
pmdomain: core: introduce dev_pm_genpd_is_on()
pmdomain: ti: Select PM_GENERIC_DOMAINS
pmdomain: sunxi: sun20i-ppu: change to tristate and enable for ARCH_SUNXI
pmdomain: sunxi: add driver for Allwinner A523's PCK-600 power controller
pmdomain: sunxi: sun20i-ppu: add A523 support
pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state
cpuidle: riscv-sbi: Drop redundant sync_state support
cpuidle: psci: Drop redundant sync_state support
pmdomain: core: Leave powered-on genpds on until sync_state
pmdomain: core: Leave powered-on genpds on until late_initcall_sync
pmdomain: core: Default to use of_genpd_sync_state() for genpd providers
driver core: Add dev_set_drv_sync_state()
pmdomain: core: Add common ->sync_state() support for genpd providers
driver core: Export get_dev_from_fwnode()
firmware: xilinx: Use of_genpd_sync_state()
firmware: xilinx: Don't share zynqmp_pm_init_finalize()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
|
