| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- mtdconcat finally makes it in, after several years of being merged
and reverted
- Baikal SoC support is being removed, so MTD bits are being removed
as well
- misc cleanups
NAND changes:
- SunXi driver support for new versions of the Allwinner NAND
controller.
- DT-binding improvements and cleanups.
- A few fixes (Realtek ECC and Winbond SPI NAND), aside with the
usual load of misc changes.
SPI NOR fixes:
- Enable die erase on MT35XU02GCBA. We knew this flash needed this
fixup since 7f77c561e227 ("mtd: spi-nor: micron-st: add TODO for
fixing mt35xu02gcba") but did not add it due to lack of hardware to
test on.
- Fix locking on some Winbond w25q series flashes.
- Fix Auto Address Increment (AAI) writes on SST that flashes that
start on odd address. The write enable latch needs to be set again
after the single byte program"
* tag 'mtd/for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (44 commits)
mtd: spinand: winbond: Declare the QE bit on W25NxxJW
mtd: spi-nor: micron-st: Enable die erase support for MT35XU02GCBA
mtd: spi-nor: winbond: Fix locking support for w25q256jw
mtd: spi-nor: sst: Fix write enable before AAI sequence
mtd: spi-nor: winbond: Fix locking support for w25q64jvm
mtd: spi-nor: winbond: Fix locking support for w25q256jwm
dt-bindings: mtd: mxc-nand: add missing compatible string and ref to nand-controller-legacy.yaml
dt-bindings: mtd: gpmi-nand: ref to nand-controller-legacy.yaml
dt-bindings: mtd: refactor NAND bindings and add nand-controller-legacy.yaml
mtd: spinand: winbond: Clarify when to enable the HS bit
mtd: rawnand: sunxi: introduce maximize variable user data length
mtd: rawnand: sunxi: fix typos in comments
mtd: rawnand: sunxi: change error prone variable name
mtd: rawnand: sunxi: remove dead code
mtd: rawnand: sunxi: make the code more self-explanatory
mtd: rawnand: sunxi: replace hard coded value by a define - take2
mtd: rawnand: sunxi: do not count BBM bytes twice
mtd: rawnand: sunxi: fix sunxi_nfc_hw_ecc_read_extra_oob
mtd: rawnand: sunxi: sunxi_nand_ooblayout_free code clarification
mtd: cmdlinepart: use a flexible array member
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- Refactor code paths involved with partial block zero-out in
prearation for converting ext4 to use iomap for buffered writes
- Remove use of d_alloc() from ext4 in preparation for the deprecation
of this interface
- Replace some J_ASSERTS with a journal abort so we can avoid a kernel
panic for a localized file system error
- Simplify various code paths in mballoc, move_extent, and fast commit
- Fix rare deadlock in jbd2_journal_cancel_revoke() that can be
triggered by generic/013 when blocksize < pagesize
- Fix memory leak when releasing an extended attribute when its value
is stored in an ea_inode
- Fix various potential kunit test bugs in fs/ext4/extents.c
- Fix potential out-of-bounds access in check_xattr() with a corrupted
file system
- Make the jbd2_inode dirty range tracking safe for lockless reads
- Avoid a WARN_ON when writeback files due to a corrupted file system;
we already print an ext4 warning indicatign that data will be lost,
so the WARN_ON is not necessary and doesn't add any new information
* tag 'ext4_for_linux-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (37 commits)
jbd2: fix deadlock in jbd2_journal_cancel_revoke()
ext4: fix missing brelse() in ext4_xattr_inode_dec_ref_all()
ext4: fix possible null-ptr-deref in mbt_kunit_exit()
ext4: fix possible null-ptr-deref in extents_kunit_exit()
ext4: fix the error handling process in extents_kunit_init).
ext4: call deactivate_super() in extents_kunit_exit()
ext4: fix miss unlock 'sb->s_umount' in extents_kunit_init()
ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access
ext4: zero post-EOF partial block before appending write
ext4: move pagecache_isize_extended() out of active handle
ext4: remove ctime/mtime update from ext4_alloc_file_blocks()
ext4: unify SYNC mode checks in fallocate paths
ext4: ensure zeroed partial blocks are persisted in SYNC mode
ext4: move zero partial block range functions out of active handle
ext4: pass allocate range as loff_t to ext4_alloc_file_blocks()
ext4: remove handle parameters from zero partial block functions
ext4: move ordered data handling out of ext4_block_do_zero_range()
ext4: rename ext4_block_zero_page_range() to ext4_block_zero_range()
ext4: factor out journalled block zeroing range
ext4: rename and extend ext4_block_truncate_page()
...
|
|
Pull bpf fixes from Alexei Starovoitov:
"Most of the diff stat comes from Xu Kuohai's fix to emit ENDBR/BTI,
since all JITs had to be touched to move constant blinding out and
pass bpf_verifier_env in.
- Fix use-after-free in arena_vm_close on fork (Alexei Starovoitov)
- Dissociate struct_ops program with map if map_update fails (Amery
Hung)
- Fix out-of-range and off-by-one bugs in arm64 JIT (Daniel Borkmann)
- Fix precedence bug in convert_bpf_ld_abs alignment check (Daniel
Borkmann)
- Fix arg tracking for imprecise/multi-offset in BPF_ST/STX insns
(Eduard Zingerman)
- Copy token from main to subprogs to fix missing kallsyms (Eduard
Zingerman)
- Prevent double close and leak of btf objects in libbpf (Jiri Olsa)
- Fix af_unix null-ptr-deref in sockmap (Michal Luczaj)
- Fix NULL deref in map_kptr_match_type for scalar regs (Mykyta
Yatsenko)
- Avoid unnecessary IPIs. Remove redundant bpf_flush_icache() in
arm64 and riscv JITs (Puranjay Mohan)
- Fix out of bounds access. Validate node_id in arena_alloc_pages()
(Puranjay Mohan)
- Reject BPF-to-BPF calls and callbacks in arm32 JIT (Puranjay Mohan)
- Refactor all JITs to pass bpf_verifier_env to emit ENDBR/BTI for
indirect jump targets on x86-64, arm64 JITs (Xu Kuohai)
- Allow UTF-8 literals in bpf_bprintf_prepare() (Yihan Ding)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (32 commits)
bpf, arm32: Reject BPF-to-BPF calls and callbacks in the JIT
bpf: Dissociate struct_ops program with map if map_update fails
bpf: Validate node_id in arena_alloc_pages()
libbpf: Prevent double close and leak of btf objects
selftests/bpf: cover UTF-8 trace_printk output
bpf: allow UTF-8 literals in bpf_bprintf_prepare()
selftests/bpf: Reject scalar store into kptr slot
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
bpf: Fix precedence bug in convert_bpf_ld_abs alignment check
bpf, arm64: Emit BTI for indirect jump target
bpf, x86: Emit ENDBR for indirect jump targets
bpf: Add helper to detect indirect jump targets
bpf: Pass bpf_verifier_env to JIT
bpf: Move constants blinding out of arch-specific JITs
bpf, sockmap: Take state lock for af_unix iter
bpf, sockmap: Fix af_unix null-ptr-deref in proto update
selftests/bpf: Extend bpf_iter_unix to attempt deadlocking
bpf, sockmap: Fix af_unix iter deadlock
bpf, sockmap: Annotate af_unix sock:: Sk_state data-races
selftests/bpf: verify kallsyms entries for token-loaded subprograms
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull stop-machine update from Paul McKenney:
- kernel-doc updates for stop_machine() and stop_machine_cpuslocked()
functions
* tag 'stop-machine.2026.04.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
stop_machine: Fix the documentation for a NULL cpus argument
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"There are two main changes, one feature removal, some code cleanup,
and a number of bug fixes.
Main changes:
- Detecting secure boot mode was limited to IMA. Make detecting
secure boot mode accessible to EVM and other LSMs
- IMA sigv3 support was limited to fsverity. Add IMA sigv3 support
for IMA regular file hashes and EVM portable signatures
Remove:
- Remove IMA support for asychronous hash calculation originally
added for hardware acceleration
Cleanup:
- Remove unnecessary Kconfig CONFIG_MODULE_SIG and CONFIG_KEXEC_SIG
tests
- Add descriptions of the IMA atomic flags
Bug fixes:
- Like IMA, properly limit EVM "fix" mode
- Define and call evm_fix_hmac() to update security.evm
- Fallback to using i_version to detect file change for filesystems
that do not support STATX_CHANGE_COOKIE
- Address missing kernel support for configured (new) TPM hash
algorithms
- Add missing crypto_shash_final() return value"
* tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
evm: Enforce signatures version 3 with new EVM policy 'bit 3'
integrity: Allow sigv3 verification on EVM_XATTR_PORTABLE_DIGSIG
ima: add support to require IMA sigv3 signatures
ima: add regular file data hash signature version 3 support
ima: Define asymmetric_verify_v3() to verify IMA sigv3 signatures
ima: remove buggy support for asynchronous hashes
integrity: Eliminate weak definition of arch_get_secureboot()
ima: Add code comments to explain IMA iint cache atomic_flags
ima_fs: Correctly create securityfs files for unsupported hash algos
ima: check return value of crypto_shash_final() in boot aggregate
ima: Define and use a digest_size field in the ima_algo_desc structure
powerpc/ima: Drop unnecessary check for CONFIG_MODULE_SIG
ima: efi: Drop unnecessary check for CONFIG_MODULE_SIG/CONFIG_KEXEC_SIG
ima: fallback to using i_version to detect file change
evm: fix security.evm for a file with IMA signature
s390: Drop unnecessary CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
evm: Don't enable fix mode when secure boot is enabled
integrity: Make arch_ima_get_secureboot integrity-wide
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"Remove the unused u8500 hardware spinlock driver, and clean out the
hwspinlock_pdata struct as this was the last user of the struct"
* tag 'hwlock-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: remove now unused pdata from header file
hwspinlock: u8500: delete driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"Mark 'data' argument in rpmsg_send() const, and perculate to related
drivers. Replace deprecated class_destroy() with class_unregister()"
* tag 'rpmsg-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
media: platform: mtk-mdp3: Constify buffer passed to mdp_vpu_sendmsg()
ASoC: qcom: Constify GPR packet being send over GPR interface
rpmsg: Constify buffer passed to send API
remoteproc: mtk_scp: Constify buffer passed to scp_send_ipi()
remoteproc: mtk_scp_ipi: Constify buffer passed to scp_ipi_send()
drivers: rpmsg: class_destroy() is deprecated
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Cleanup of the reserved memory code to keep CMA specifics in CMA
code
- Add and convert several users to new of_machine_get_match() helper
- Validate nul termination in string properties
- Update dtc to upstream v1.7.2-69-g53373d135579
- Limit matching reserved memory devices to /reserved-memory nodes
- Fix some UAF in unittests
- Remove Baikal SoC bus driver
- Fix false DT_SPLIT_BINDING_PATCH checkpatch warning
- Allow fw_devlink device-tree on x86
- Fix kerneldoc return description for of_property_count_elems_of_size()
DT bindings:
- Add fsl,imx25-aips, fsl,imx25-tcq, qcom,eliza-pdc,
qcom,eliza-spmi-pmic-arb, qcom,hawi-imem, qcom,milos-imem,
qcom,hawi-pdc, and lg,sw49410 bindings
- Convert arm,vexpress-scc to DT schema
- Deprecate Qualcomm generic CPU compatibles. Add Apple M3 CPU cores.
- Move some dual-link display panels to the dual-link schema
- Drop mux controller node name constraints
- Remove Baikal SoC bus bindings
- Fix a false warning in the thermal trip node binding"
* tag 'devicetree-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: display: panel: panel-simple: Add lg,sw49410 compatible
dt-bindings: display: ti, am65x-dss: Fix AM62L DSS reg and clock constraints
dt-bindings: display: simple: Move Innolux G156HCE-L01 panel to dual-link
dt-bindings: display: simple: Move AUO 21.5" FHD to dual-link
dt-bindings: thermal: Fix false warning with 'phandle' in trips nodes
of: unittest: fix use-after-free in testdrv_probe()
of: unittest: fix use-after-free in of_unittest_changeset()
dt-bindings: qcom,pdc: document the Hawi Power Domain Controller
dt-bindings: ARM: arm,vexpress-scc: convert to DT schema
drivers/of: fdt: validate flat DT string properties before string use
drivers/of: fdt: validate stdout-path properties before parsing them
dt-bindings: sram: Document qcom,hawi-imem compatible
dt-bindings: sram: Allow multiple-word prefixes to sram subnode
dt-bindings: sram: Document qcom,milos-imem
scripts/dtc: Update to upstream version v1.7.2-69-g53373d135579
of: property: Allow fw_devlink device-tree on x86
dt-bindings: arm: cpus: Add Apple M3 CPU core compatibles
dt-bindings: display: lt8912b: Drop redundant endpoint properties
dt-bindings: opp-v2: Fix example 3 CPU reg value
dt-bindings: connector: add pd-disable dependency
...
|
|
The main changes happened in the SunXi driver in order to
support new versions of the Allwinner NAND controller.
There are also some DT-binding improvements and cleanups.
Finally a couple of actual fixes (Realtek ECC and Winbond SPI NAND),
aside with the usual load of misc changes.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply drivers:
- S2MU005: new battery fuel gauge driver
- macsmc-power: new driver for Apple Silicon
- qcom_battmgr: Add support for Glymur and Kaanapali
- max17042: add support for max77759
- qcom_smbx: allow disabling charging
- bd71828: add input current limit support
- multiple drivers: use new device managed workqueue allocation
function
- misc small cleanups and fixes
Reset core:
- Expose sysfs for registered reboot_modes
Reset drivers
- misc small cleanups and fixes"
* tag 'for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (36 commits)
power: supply: qcom_smbx: allow disabling charging
power: reset: drop unneeded dependencies on OF_GPIO
power: supply: bd71828: add input current limit property
dt-bindings: power: reset: cortina,gemini-power-controller: convert to DT schema
power: supply: add support for S2MU005 battery fuel gauge device
dt-bindings: power: supply: document Samsung S2MU005 battery fuel gauge
power: reset: reboot-mode: fix -Wformat-security warning
power: supply: ipaq_micro: Simplify with devm
power: supply: mt6370: Simplify with devm_alloc_ordered_workqueue()
power: supply: max77705: Free allocated workqueue and fix removal order
power: supply: max77705: Drop duplicated IRQ error message
power: supply: cw2015: Free allocated workqueue
power: reset: keystone: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
power: supply: twl4030_madc: Drop unused header includes
power: supply: bq24190: Avoid rescheduling after cancelling work
power: supply: axp288_charger: Simplify returns of dev_err_probe()
power: supply: axp288_charger: Do not cancel work before initializing it
power: supply: cpcap-battery: pass static battery cell data from device tree
dt-bindings: power: supply: cpcap-battery: document monitored-battery property
power: supply: qcom_battmgr: Add support for Glymur and Kaanapali
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- use flexible array member for hsi_port in hsi_controller
- misc small fixes
* tag 'hsi-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi_port: remove depends on ARM
HSI: omap_ssi_port: remove set but unused variables
HSI: cmt_speech: fix wrong printf format
HSI: omap_ssi_port: remove null check from FAM
hsi: hsi_core: use kzalloc_flex
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
"Core:
- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device (Lucas Zampieri)
Drivers:
- support for rumble effects in winwing driver (Ivan Gorinov)
- new support for a variety of Sony Rock Band and Sony DJ Hero
Turntable devices (Rosalie Wanders)
- new driver for Lenovo Legion Go / S devices (Derek J. Clark)
- power management improvements to intel-thc-hid driver (Even Xu)
... other assorted cleanups, fixes and device-specific quirks"
* tag 'hid-for-linus-2026041601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (73 commits)
HID: core: clamp report_size in s32ton() to avoid undefined shift
HID: logitech-dj: fix wrong detection of bad DJ_SHORT output report
HID: logitech-hidpp: fix race condition when accessing stale stack pointer
HID: winwing: Enable rumble effects
HID: core: do not allow parsing 0-sized reports
HID: usbhid: refactor endpoint lookup
HID: huawei: fix CD30 keyboard report descriptor issue
HID: playstation: validate num_touch_reports in DualShock 4 reports
HID: drop 'default !EXPERT' from tristate symbols
HID: usbhid: fix deadlock in hid_post_reset()
HID: apple: ensure the keyboard backlight is off if suspending
HID: quirks: Set ALWAYS_POLL for LOGITECH_BOLT_RECEIVER
HID: alps: fix NULL pointer dereference in alps_raw_event()
HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write
HID: logitech-dj: Standardise hid_report_enum variable nomenclature
HID: sony: update module description
HID: logitech-hidpp: Check bounds when deleting force-feedback effects
HID: sony: add battery status support for Rock Band 4 PS5 guitars
HID: sony: fix style issues
HID: quirks: update hid-sony supported devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and
its clients (Marek Szyprowski, shared branch with device-tree updates
to avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma
utility (Qinxin Xia)
* tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (24 commits)
dma-buf: heaps: system: document system_cc_shared heap
dma-buf: heaps: system: add system_cc_shared heap for explicitly shared memory
dma-mapping: introduce DMA_ATTR_CC_SHARED for shared memory
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
dma: contiguous: Export dev_get_cma_area()
dma: contiguous: Make dma_contiguous_default_area static
dma: contiguous: Make dev_get_cma_area() a proper function
dma: contiguous: Turn heap registration logic around
of: reserved_mem: rework fdt_init_reserved_mem_node()
of: reserved_mem: clarify fdt_scan_reserved_mem*() functions
of: reserved_mem: rearrange code a bit
of: reserved_mem: replace CMA quirks by generic methods
of: reserved_mem: switch to ops based OF_DECLARE()
of: reserved_mem: use -ENODEV instead of -ENOENT
of: reserved_mem: remove fdt node from the structure
dma-mapping: fix false kernel-doc comment marker
dma-mapping: Support batch mode for dma_direct_{map,unmap}_sg
dma-mapping: Separate DMA sync issuing and completion waiting
arm64: Provide dcache_inval_poc_nosync helper
arm64: Provide dcache_clean_poc_nosync helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- New devm_of_dma_controller_register() API
New Support:
- Support for RZ/G3L SoC
- Loongson Multi-Channel DMA controller support
- Conversion of Xilinx AXI DMA binding
- DW AXI CV1800B DMA support
- Switchtec DMA engine driver
Updates:
- AMD MDB Endpoint and non-LL mode support
- DW edma virtual IRQ for interrupt-emulation, cyclic transfers support"
* tag 'dmaengine-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (65 commits)
dmaengine: dw-edma: Add non-LL mode
dmaengine: dw-edma: Add AMD MDB Endpoint Support
dt-bindings: dmaengine: Fix spelling mistake "Looongson" -> "Looogson"
dmaengine: loongson: Fix spelling mistake "Looongson" -> "Looogson"
dmaengine: loongson: New driver for the Loongson Multi-Channel DMA controller
dt-bindings: dmaengine: Add Loongson Multi-Channel DMA controller
dmaengine: loongson: loongson2-apb: Simplify locking with guard() and scoped_guard()
dmaengine: loongson: loongson2-apb: Convert to devm_clk_get_enabled()
dmaengine: loongson: loongson2-apb: Convert to dmaenginem_async_device_register()
dmaengine: loongson: New directory for Loongson DMA controllers drivers
dt-bindings: dma: xlnx,axi-dma: Convert to DT schema
dt-bindings: dma: rz-dmac: Add conditional schema for RZ/G3L
dmaengine: sh: rz-dmac: Add device_{pause,resume}() callbacks
dmaengine: sh: rz-dmac: Add device_tx_status() callback
dmaengine: sh: rz-dmac: Use rz_lmdesc_setup() to invalidate descriptors
dmaengine: sh: rz-dmac: Drop unnecessary local_irq_save() call
dmaengine: sh: rz-dmac: Drop goto instruction and label
dmaengine: sh: rz-dmac: Drop read of CHCTRL register
dmaengine: sh: rz_dmac: add RZ/{T2H,N2H} support
dt-bindings: dma: renesas,rz-dmac: document RZ/{T2H,N2H}
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Core: DP prepare polling for avoiding interrupt deadlock
- AMD clock init and bandwidth refactoring
- Intel more codecs to wake list, clear message on before signaling
waiting thread
* tag 'soundwire-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_auxdevice: Add cs42l49 to wake_capable_list
soundwire: cadence: Clear message complete before signaling waiting thread
soundwire: Intel: test bus.bpt_stream before assigning it
soundwire: bus: demote UNATTACHED state warnings to dev_dbg()
soundwire: stream: Poll for DP prepare to avoid interrupt deadlock
soundwire: amd: refactor bandwidth calculation logic
soundwire: amd: add clock init control function
soundwire: intel_auxdevice: Add CS47L47 to wake_capable_list
soundwire: slave: Don't register devices that are disabled in ACPI
soundwire: sdw.h: repair names and format of kernel-doc comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
"Minor fixes for handling errors:
- fix off-by-one in xbc_verify_tree() next node check
- increment xbc_node_num after node init succeeds
- validate child node index in xbc_verify_tree()
Code cleanups (mainly type/attribute changes):
- clean up comment typos and bracing
- drop redundant memset of xbc_nodes
- replace linux/kernel.h with specific includes
- narrow flag parameter type from uint32_t to uint16_t
- constify xbc_calc_checksum() data parameter
- fix signed comparison in xbc_node_get_data()
- use size_t for strlen result in xbc_node_match_prefix()
- use signed type for offset in xbc_init_node()
- use size_t for key length tracking in xbc_verify_tree()
- change xbc_node_index() return type to uint16_t"
* tag 'bootconfig-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
lib/bootconfig: change xbc_node_index() return type to uint16_t
lib/bootconfig: use size_t for key length tracking in xbc_verify_tree()
lib/bootconfig: use signed type for offset in xbc_init_node()
lib/bootconfig: use size_t for strlen result in xbc_node_match_prefix()
lib/bootconfig: fix signed comparison in xbc_node_get_data()
lib/bootconfig: validate child node index in xbc_verify_tree()
lib/bootconfig: replace linux/kernel.h with specific includes
bootconfig: constify xbc_calc_checksum() data parameter
lib/bootconfig: drop redundant memset of xbc_nodes
lib/bootconfig: increment xbc_node_num after node init succeeds
lib/bootconfig: fix off-by-one in xbc_verify_tree() next node check
lib/bootconfig: narrow flag parameter type from uint32_t to uint16_t
lib/bootconfig: clean up comment typos and bracing
|
|
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl
Pull fwctl updates from Jason Gunthorpe:
- New fwctl driver for Broadcom RDMA NICs
- Bug fix for non-modular builds
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl:
fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal
fwctl/bnxt_fwctl: Add documentation entries
fwctl/bnxt_fwctl: Add bnxt fwctl device
fwctl/bnxt_en: Create an aux device for fwctl
fwctl/bnxt_en: Refactor aux bus functions to be more generic
fwctl/bnxt_en: Move common definitions to include/linux/bnxt/
|
|
Pull SoC ARM code updates from Arnd Bergmann:
"These are again very minimal updates:
- A workaround for firmware on Google Nexus 10
- A fix for early debugging on OMAP1
- A rework for Microchip SoC configuration
- Cleanups on OMAP2 an R-Car-Gen2"
* tag 'soc-arm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
arm64: Kconfig: provide a top-level switch for Microchip platforms
ARM: shmobile: rcar-gen2: Use of_phandle_args_equal() helper
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
ARM: samsung: exynos5250: Allow CPU1 to boot
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "pid: make sub-init creation retryable" (Oleg Nesterov)
Make creation of init in a new namespace more robust by clearing away
some historical cruft which is no longer needed. Also some
documentation fixups
- "selftests/fchmodat2: Error handling and general" (Mark Brown)
Fix and a cleanup for the fchmodat2() syscall selftest
- "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)
- "hung_task: Provide runtime reset interface for hung task detector"
(Aaron Tomlin)
Give administrators the ability to zero out
/proc/sys/kernel/hung_task_detect_count
- "tools/getdelays: use the static UAPI headers from
tools/include/uapi" (Thomas Weißschuh)
Teach getdelays to use the in-kernel UAPI headers rather than the
system-provided ones
- "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)
Several cleanups and fixups to the hardlockup detector code and its
documentation
- "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)
A couple of small/theoretical fixes in the bch code
- "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)
- "cleanup the RAID5 XOR library" (Christoph Hellwig)
A quite far-reaching cleanup to this code. I can't do better than to
quote Christoph:
"The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography
and not using the crypto API, with the generic implementations
sitting in include/asm-generic and the arch implementations
sitting in an asm/ header in theory. The latter doesn't work for
many cases, so architectures often build the code directly into
the core kernel, or create another module for the architecture
code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric
Biggers has done for the CRC and crypto libraries later. After
that it changes to better calling conventions that allow for
smarter architecture implementations (although none is contained
here yet), and uses static_call to avoid indirection function call
overhead"
- "lib/list_sort: Clean up list_sort() scheduling workarounds"
(Kuan-Wei Chiu)
Clean up this library code by removing a hacky thing which was added
for UBIFS, which UBIFS doesn't actually need
- "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)
Fix a few bugs in the scatterlist code, add in-kernel tests for the
now-fixed bugs and fix a leak in the test itself
- "kdump: Enable LUKS-encrypted dump target support in ARM64 and
PowerPC" (Coiby Xu)
Enable support of the LUKS-encrypted device dump target on arm64 and
powerpc
- "ocfs2: consolidate extent list validation into block read callbacks"
(Joseph Qi)
Cleanup, simplify, and make more robust ocfs2's validation of extent
list fields (Kernel test robot loves mounting corrupted fs images!)
* tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits)
ocfs2: validate group add input before caching
ocfs2: validate bg_bits during freefrag scan
ocfs2: fix listxattr handling when the buffer is full
doc: watchdog: fix typos etc
update Sean's email address
ocfs2: use get_random_u32() where appropriate
ocfs2: split transactions in dio completion to avoid credit exhaustion
ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path()
ocfs2: validate extent block list fields during block read
ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec()
ocfs2: validate dx_root extent list fields during block read
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
ocfs2: handle invalid dinode in ocfs2_group_extend
.get_maintainer.ignore: add Askar
ocfs2: validate bg_list extent bounds in discontig groups
checkpatch: exclude forward declarations of const structs
tools/accounting: handle truncated taskstats netlink messages
taskstats: set version in TGID exit notifications
ocfs2/heartbeat: fix slot mapping rollback leaks on error paths
arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
...
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix integer underflow in encrypted read
- Four debug patches, adding a few tracepoints
- Minor update to MAINTAINERS file (preferred server URL for cifs)
- Remove the BUG_ON() calls in d_mark_tmpfile_name
* tag 'v7.1-rc1-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
MAINTAINERS: change git.samba.org to https
smb: client: fix integer underflow in receive_encrypted_read()
smb: client: add tracepoints for deferred handle caching
smb: client: add oplock level to smb3_open_done tracepoint
smb: client: add tracepoint for local lock conflicts
smb: client: add tracepoints for lock operations
vfs: get rid of BUG_ON() in d_mark_tmpfile_name()
|
|
- new driver for Lenovo Legion Go / S devices (Derek J. Clark)
|
|
- support for rubmle effects in winwing driver (Ivan Gorinov)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Again not a busy cycle for EFI, just some minor tweaks and bug fixes:
- Enable boot graphics resource table (BGRT) on Xen/x86
- Correct a misguided assumption in the memory attributes table
sanity check
- Start tagging efi_mem_reserve()'d regions as MEMBLOCK_RSRV_KERN
- Some other minor fixes and cleanups"
* tag 'efi-next-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/capsule-loader: fix incorrect sizeof in phys array reallocation
efi: Tag memblock reservations of boot services regions as RSRV_KERN
memblock: Permit existing reserved regions to be marked RSRV_KERN
efi/memattr: Fix thinko in table size sanity check
efi: libstub: fix type of fdt 32 and 64bit variables
efi: Drop unused efi_range_is_wc() function
efi: Enable BGRT loading under Xen
efi: make efi_mem_type() and efi_mem_attributes() work on Xen PV
|
|
Pull VFIO updates from Alex Williamson:
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices (Vijay
Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
- Fix vfio selftest MMIO DMA mapping selftest (Alex Mastro)
- Conversions to const struct class in support of class_create()
deprecation (Jori Koolstra)
- Improve selftest compiler compatibility by avoiding initializer on
variable-length array (Manish Honap)
- Define new uAPI for drivers supporting migration to advise user-
space of new initial data for reducing target startup latency.
Implemented for mlx5 vfio-pci variant driver (Yishai Hadas)
- Enable vfio selftests on aarch64, not just cross-compiles reporting
arm64 (Ted Logan)
- Update vfio selftest driver support to include additional DSA devices
(Yi Lai)
- Unconditionally include debugfs root pointer in vfio device struct,
avoiding a build failure seen in hisi_acc variant driver without
debugfs otherwise (Arnd Bergmann)
- Add support for the s390 ISM (Internal Shared Memory) device via a
new variant driver. The device is unique in the size of its BAR space
(256TiB) and lack of mmap support (Julian Ruess)
- Enforce that vfio-pci drivers implement a name in their ops structure
for use in sequestering SR-IOV VFs (Alex Williamson)
- Prune leftover group notifier code (Paolo Bonzini)
- Fix Xe vfio-pci variant driver to avoid migration support as a
dependency in the reset path and missing release call (Michał
Winiarski)
* tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio: (23 commits)
vfio/xe: Add a missing vfio_pci_core_release_dev()
vfio/xe: Reorganize the init to decouple migration from reset
vfio: remove dead notifier code
vfio/pci: Require vfio_device_ops.name
MAINTAINERS: add VFIO ISM PCI DRIVER section
vfio/ism: Implement vfio_pci driver for ISM devices
vfio/pci: Rename vfio_config_do_rw() to vfio_pci_config_rw_single() and export it
vfio: unhide vdev->debug_root
vfio/qat: add support for Intel QAT 420xx VFs
vfio: selftests: Support DMR and GNR-D DSA devices
vfio: selftests: Build tests on aarch64
vfio/mlx5: Add REINIT support to VFIO_MIG_GET_PRECOPY_INFO
vfio/mlx5: consider inflight SAVE during PRE_COPY
net/mlx5: Add IFC bits for migration state
vfio: Adapt drivers to use the core helper vfio_check_precopy_ioctl
vfio: Add support for VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2
vfio: Define uAPI for re-init initial bytes during the PRE_COPY phase
vfio: selftests: Fix VLA initialisation in vfio_pci_irq_set()
vfio: uapi: fix comment typo
vfio: mdev: replace mtty_dev->vd_class with a const struct class
...
|
|
Introduce helper bpf_insn_is_indirect_target to check whether a BPF
instruction is an indirect jump target.
Since the verifier knows which instructions are indirect jump targets,
add a new flag indirect_target to struct bpf_insn_aux_data to mark
them. The verifier sets this flag when verifying an indirect jump target
instruction, and the helper checks the flag to determine whether an
instruction is an indirect jump target.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> #v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> #v12
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-4-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pass bpf_verifier_env to bpf_int_jit_compile(). The follow-up patch will
use env->insn_aux_data in the JIT stage to detect indirect jump targets.
Since bpf_prog_select_runtime() can be called by cbpf and lib/test_bpf.c
code without verifier, introduce helper __bpf_prog_select_runtime()
to accept the env parameter.
Remove the call to bpf_prog_select_runtime() in bpf_prog_load(), and
switch to call __bpf_prog_select_runtime() in the verifier, with env
variable passed. The original bpf_prog_select_runtime() is preserved for
cbpf and lib/test_bpf.c, where env is NULL.
Now all constants blinding calls are moved into the verifier, except
the cbpf and lib/test_bpf.c cases. The instructions arrays are adjusted
by bpf_patch_insn_data() function for normal cases, so there is no need
to call adjust_insn_arrays() in bpf_jit_blind_constants(). Remove it.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> # v12
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # v14
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
During the JIT stage, constants blinding rewrites instructions but only
rewrites the private instruction copy of the JITed subprog, leaving the
global env->prog->insnsi and env->insn_aux_data untouched. This causes a
mismatch between subprog instructions and the global state, making it
difficult to use the global data in the JIT.
To avoid this mismatch, and given that all arch-specific JITs already
support constants blinding, move it to the generic verifier code, and
switch to rewrite the global env->prog->insnsi with the global states
adjusted, as other rewrites in the verifier do.
This removes the constants blinding calls in each JIT, which are largely
duplicated code across architectures.
Since constants blinding is only required for JIT, and there are two
JIT entry functions, jit_subprogs() for BPF programs with multiple
subprogs and bpf_prog_select_runtime() for programs with no subprogs,
move the constants blinding invocation into these two functions.
In the verifier path, bpf_patch_insn_data() is used to keep global
verifier auxiliary data in sync with patched instructions. A key
question is whether this global auxiliary data should be restored
on the failure path.
Besides instructions, bpf_patch_insn_data() adjusts:
- prog->aux->poke_tab
- env->insn_array_maps
- env->subprog_info
- env->insn_aux_data
For prog->aux->poke_tab, it is only used by JIT or only meaningful after
JIT succeeds, so it does not need to be restored on the failure path.
For env->insn_array_maps, when JIT fails, programs using insn arrays
are rejected by bpf_insn_array_ready() due to missing JIT addresses.
Hence, env->insn_array_maps is only meaningful for JIT and does not need
to be restored.
For subprog_info, if jit_subprogs fails and CONFIG_BPF_JIT_ALWAYS_ON
is not enabled, kernel falls back to interpreter. In this case,
env->subprog_info is used to determine subprogram stack depth. So it
must be restored on failure.
For env->insn_aux_data, it is freed by clear_insn_aux_data() at the
end of bpf_check(). Before freeing, clear_insn_aux_data() loops over
env->insn_aux_data to release jump targets recorded in it. The loop
uses env->prog->len as the array length, but this length no longer
matches the actual size of the adjusted env->insn_aux_data array after
constants blinding.
To address it, a simple approach is to keep insn_aux_data as adjusted
after failure, since it will be freed shortly, and record its actual size
for the loop in clear_insn_aux_data(). But since clear_insn_aux_data()
uses the same index to loop over both env->prog->insnsi and env->insn_aux_data,
this approach results in incorrect index for the insnsi array. So an
alternative approach is adopted: clone the original env->insn_aux_data
before blinding and restore it after failure, similar to env->prog.
For classic BPF programs, constants blinding works as before since it
is still invoked from bpf_prog_select_runtime().
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> # powerpc jit
Reviewed-by: Pu Lehui <pulehui@huawei.com> # riscv jit
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # loongarch jit
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-2-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, udf, quota updates from Jan Kara:
- A fix for a race in quota code that can expose ocfs2 to
use-after-free issues
- UDF fix to avoid memory corruption in face of corrupted format
- Couple of ext2 fixes for better handling of fs corruption
- Some more various code cleanups in UDF & ext2
* tag 'fs_for_v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: reject inodes with zero i_nlink and valid mode in ext2_iget()
ext2: use get_random_u32() where appropriate
quota: Fix race of dquot_scan_active() with quota deactivation
udf: fix partition descriptor append bookkeeping
ext2: avoid drop_nlink() during unlink of zero-nlink inode in ext2_unlink()
ext2: guard reservation window dump with EXT2FS_DEBUG
ext2: replace BUG_ON with WARN_ON_ONCE in ext2_get_blocks
ext2: remove stale TODO about kmap
fs: udf: avoid assignment in condition when selecting allocation goal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verification updates from Steven Rostedt:
- Refactor da_monitor header to share handlers across monitor types
No functional changes, only less code duplication.
- Add Hybrid Automata model class
Add a new model class that extends deterministic automata by adding
constraints on transitions and states. Those constraints can take
into account wall-clock time and as such allow RV monitor to make
assertions on real time. Add documentation and code generation
scripts.
- Add stall monitor as hybrid automaton example
Add a monitor that triggers a violation when a task is stalling as an
example of automaton working with real time variables.
- Convert the opid monitor to a hybrid automaton
The opid monitor can be heavily simplified if written as a hybrid
automaton: instead of tracking preempt and interrupt enable/disable
events, it can just run constraints on the preemption/interrupt
states when events like wakeup and need_resched verify.
- Add support for per-object monitors in DA/HA
Allow writing deterministic and hybrid automata monitors for generic
objects (e.g. any struct), by exploiting a hash table where objects
are saved. This allows to track more than just tasks in RV. For
instance it will be used to track deadline entities in deadline
monitors.
- Add deadline tracepoints and move some deadline utilities
Prepare the ground for deadline monitors by defining events and
exporting helpers.
- Add nomiss deadline monitor
Add first example of deadline monitor asserting all entities complete
before their deadline.
- Improve rvgen error handling
Introduce AutomataError exception class and better handle expected
exceptions while showing a backtrace for unexpected ones.
- Improve python code quality in rvgen
Refactor the rvgen generation scripts to align with python best
practices: use f-strings instead of %, use len() instead of
__len__(), remove semicolons, use context managers for file
operations, fix whitespace violations, extract magic strings into
constants, remove unused imports and methods.
- Fix small bugs in rvgen
The generator scripts presented some corner case bugs: logical error
in validating what a correct dot file looks like, fix an isinstance()
check, enforce a dot file has an initial state, fix type annotations
and typos in comments.
- rvgen refactoring
Refactor automata.py to use iterator-based parsing and handle
required arguments directly in argparse.
- Allow epoll in rtapp-sleep monitor
The epoll_wait call is now rt-friendly so it should be allowed in the
sleep monitor as a valid sleep method.
* tag 'trace-rv-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (32 commits)
rv: Allow epoll in rtapp-sleep monitor
rv/rvgen: fix _fill_states() return type annotation
rv/rvgen: fix unbound loop variable warning
rv/rvgen: enforce presence of initial state
rv/rvgen: extract node marker string to class constant
rv/rvgen: fix isinstance check in Variable.expand()
rv/rvgen: make monitor arguments required in rvgen
rv/rvgen: remove unused __get_main_name method
rv/rvgen: remove unused sys import from dot2c
rv/rvgen: refactor automata.py to use iterator-based parsing
rv/rvgen: use class constant for init marker
rv/rvgen: fix DOT file validation logic error
rv/rvgen: fix PEP 8 whitespace violations
rv/rvgen: fix typos in automata and generator docstring and comments
rv/rvgen: use context managers for file operations
rv/rvgen: remove unnecessary semicolons
rv/rvgen: replace __len__() calls with len()
rv/rvgen: replace % string formatting with f-strings
rv/rvgen: remove bare except clauses in generator
rv/rvgen: introduce AutomataError exception class
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Add remote buffers for pKVM
pKVM has a hypervisor component that is used to protect the guest
from the host kernel. This hypervisor is a black box to the kernel as
the kernel is to user space. The remote buffers are used to have a
memory mapping between the hypervisor and the kernel where kernel may
send commands to enable tracing within the hypervisor. Then the
kernel will read this memory mapping just like user space can read
the memory mapped ring buffer of the kernel tracing system.
Since the hypervisor only has a single context, it doesn't need to
worry about races between normal context, interrupt context and NMIs
like the kernel does. The ring buffer it uses doesn't need to be as
complex. The remote buffers are a simple version of the ring buffer
that works in a single context. They are still per-CPU and use sub
buffers. The data layout is the same as the kernel's ring buffer to
share the same parsing.
Currently, only ARM64 implements pKVM, but there's work to implement
it also in x86. The remote buffer code is separated out from the ARM
implementation so that it can be used in the future by x86.
The ARM64 updates for pKVM is in the ARM/KVM tree and it merged in
the remote buffers of this tree.
- Make the backup instance non reusable
The backup instance is a copy of the persistent ring buffer so that
the persistent ring buffer could start recording again without using
the data from the previous boot. The backup isn't for normal tracing.
It is made read-only, and after it is consumed, it is automatically
removed.
- Have backup copy persistent instance before it starts recording
To allow the persistent ring buffer to start recording from the
kernel command line commands, move the copy of the backup instance to
before the the command line options start recording.
- Report header_page overwrite field as "char" and not "int'
The rust parser of the header_page file was triggering a warning when
it defined the overwrite variable as "int" but it was only a single
byte in size.
- Fix memory barriers for the trace_buffer CPU mask
When a CPU comes online, the bit is set to allow readers to know that
the CPU buffer is allocated. The bit is set after the allocation is
done, and a smp_wmb() is performed after the allocation and before
the setting of the bit. But instead of adding a smp_rmb() to all
readers, since once a buffer is created for a CPU it is not deleted
if that CPU goes offline, so this allocation is almost always done at
boot up before any readers exist.
If for the unlikely case where a CPU comes online for the first time
after the system boot has finished, send an IPI to all CPUs to force
the smp_rmb() for each CPU.
- Show clock function being used in debugging ring buffer data
When the ring buffer checks are enabled and the ring buffer detects
an inconsistency in the times of the invents, print out the clock
being used when the error occurred. There was a very hard to hit bug
that would happen every so often and it ended up being only triggered
when the jiffies clock was being used. If the bug showed the clock
being used, it would have been much easier to find the problem (which
was an internal function was being traced which caused the clock
accounting to go off).
* tag 'trace-ringbuffer-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ring-buffer: Prevent off-by-one array access in ring_buffer_desc_page()
ring-buffer: Report header_page overwrite as char
tracing: Allow backup to save persistent ring buffer before it starts
tracing/Documentation: Add a section about backup instance
tracing: Remove the backup instance automatically after read
tracing: Make the backup instance non-reusable
ring-buffer: Enforce read ordering of trace_buffer cpumask and buffers
ring-buffer: Show what clock function is used on timestamp errors
tracing: Check for undefined symbols in simple_ring_buffer
tracing: load/unload page callbacks for simple_ring_buffer
Documentation: tracing: Add tracing remotes
tracing: selftests: Add trace remote tests
tracing: Add a trace remote module for testing
tracing: Introduce simple_ring_buffer
ring-buffer: Export buffer_data_page and macros
tracing: Add helpers to create trace remote events
tracing: Add events/ root files to trace remotes
tracing: Add events to trace remotes
tracing: Add init callback to trace remotes
tracing: Add non-consuming read to trace remotes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes
- Remove simd skcipher support
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off
Algorithms:
- Remove CPU-based des/3des acceleration
- Add test vectors for authenc(hmac(md5),cbc({aes,des})) and
authenc(hmac({md5,sha1,sha224,sha256,sha384,sha512}),rfc3686(ctr(aes)))
- Replace spin lock with mutex in jitterentropy
Drivers:
- Add authenc algorithms to safexcel
- Add support for zstd in qat
- Add wireless mode support for QAT GEN6
- Add anti-rollback support for QAT GEN6
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2"
* tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (129 commits)
crypto: af_alg - use sock_kmemdup in alg_setkey_by_key_serial
crypto: vmx - remove CRYPTO_DEV_VMX from Kconfig
crypto: omap - convert reqctx buffer to fixed-size array
crypto: atmel-sha204a - add Thorsten Blum as maintainer
crypto: atmel-ecc - add Thorsten Blum as maintainer
crypto: qat - fix IRQ cleanup on 6xxx probe failure
crypto: geniv - Remove unused spinlock from struct aead_geniv_ctx
crypto: qce - simplify qce_xts_swapiv()
crypto: hisilicon - Fix dma_unmap_single() direction
crypto: talitos - rename first/last to first_desc/last_desc
crypto: talitos - fix SEC1 32k ahash request limitation
crypto: jitterentropy - replace long-held spinlock with mutex
crypto: hisilicon - remove unused and non-public APIs for qm and sec
crypto: hisilicon/qm - drop redundant variable initialization
crypto: hisilicon/qm - remove else after return
crypto: hisilicon/qm - add const qualifier to info_name in struct qm_cmd_dump_item
crypto: hisilicon - fix the format string type error
crypto: ccree - fix a memory leak in cc_mac_digest()
crypto: qat - add support for zstd
crypto: qat - use swab32 macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Benjamin Marzinski:
"There are fixes for some corner case crashes in dm-cache and
dm-mirror, new setup functionality for dm-vdo, and miscellaneous minor
fixes and cleanups, especially to dm-verity.
dm-vdo:
- Make dm-vdo able to format the device itself, like other dm
targets, instead of needing a userspace formating program
- Add some sanity checks and code cleanup
dm-cache:
- Fix crashes and hangs when operating in passthrough mode (which
have been around, unnoticed, since 4.12), as well as a late
arriving fix for an error path bug in the passthrough fix
- Fix a corner case memory leak
dm-verity:
- Another set of minor bugfixes and code cleanups to the forward
error correction code
dm-mirror
- Fix minor initialization bug
- Fix overflow crash on a large devices with small region sizes
dm-crypt
- Reimplement elephant diffuser using AES library and minor cleanups
dm-core:
- Claude found a buffer overflow in /dev/mapper/contrl ioctl handling
- make dm_mod.wait_for correctly wait for partitions
- minor code fixes and cleanups"
* tag 'for-7.1/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits)
dm cache: fix missing return in invalidate_committed's error path
dm: fix a buffer overflow in ioctl processing
dm-crypt: Make crypt_iv_operations::post return void
dm vdo: Fix spelling mistake "postive" -> "positive"
dm: provide helper to set stacked limits
dm-integrity: always set the io hints
dm-integrity: fix mismatched queue limits
dm-bufio: use kzalloc_flex
dm vdo: save the formatted metadata to disk
dm vdo: add formatting logic and initialization
dm vdo: add synchronous metadata I/O submission helper
dm vdo: add geometry block structure
dm vdo: add geometry block encoding
dm vdo: add upfront validation for logical size
dm vdo: add formatting parameters to table line
dm vdo: add super block initialization to encodings.c
dm vdo: add geometry block initialization to encodings.c
dm-crypt: Make crypt_iv_operations::wipe return void
dm-crypt: Reimplement elephant diffuser using AES library
dm-verity-fec: warn even when there were no errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core:
- Support for RISC-V IO-page-table format in generic iommupt code
ARM-SMMU Updates:
- Introduction of an "invalidation array" for SMMUv3, which enables
future scalability work and optimisations for devices with a large
number of SMMUv3 instances
- Update the conditions under which the SMMUv3 driver works around
hardware errata for invalidation on MMU-700 implementations
- Fix broken command filtering for the host view of NVIDIA's "cmdqv"
SMMUv3 extension
- MMU-500 device-tree binding additions for Qualcomm Eliza & Hawi
SoCs
Intel VT-d:
- Support for dirty tracking on domains attached to PASID
- Removal of unnecessary read*()/write*() wrappers
- Improvements to the invalidation paths
AMD Vi:
- Race-condition fixed in debugfs code
- Make log buffer allocation NUMA aware
RISC-V:
- IO-TLB flushing improvements
- Minor fixes"
* tag 'iommu-updates-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (48 commits)
iommu/vt-d: Restore IOMMU_CAP_CACHE_COHERENCY
dt-bindings: arm-smmu: qcom: Add compatible for Hawi SoC
iommu/amd: Invalidate IRT cache for DMA aliases
iommu/riscv: Remove overflows on the invalidation path
iommu/amd: Fix clone_alias() to use the original device's devid
iommu/vt-d: Remove the remaining pages along the invalidation path
iommu/vt-d: Pass size_order to qi_desc_piotlb() not npages
iommu/vt-d: Split piotlb invalidation into range and all
iommu/vt-d: Remove dmar_writel() and dmar_writeq()
iommu/vt-d: Remove dmar_readl() and dmar_readq()
iommufd/selftest: Test dirty tracking on PASID
iommu/vt-d: Support dirty tracking on PASID
iommu/vt-d: Rename device_set_dirty_tracking() and pass dmar_domain pointer
iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
iommu/dma: Always allow DMA-FQ when iommupt provides the iommu_domain
iommu/riscv: Fix signedness bug
iommu/amd: Fix illegal cap/mmio access in IOMMU debugfs
iommu/amd: Fix illegal device-id access in IOMMU debugfs
iommu/tegra241-cmdqv: Update uAPI to clarify HYP_OWN requirement
iommu/tegra241-cmdqv: Set supports_cmd op in tegra241_vcmdq_hw_init()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Misc code cleanups related to tag checking and tag command completion
(Damien)
- Remove Baikal bt1-ahci DT binding since the upstreaming for this SoC
is not going to be finalized (Andy)
- Only call the libata port error handler from the SCSI error handler
if there were command timeouts or if EH was scheduled for the port
(Damien)
- Refactor ata_scsiop_maint_in() to more clearly show that there is
only one service action implemented for the MAINTENANCE IN command
(me)
- Clean up the handling of sysfs attributes exposed by libata (Heiner)
- Let libahci_platform use a flexible array member for platform PHYs to
avoid multiple allocations (Rosen)
- Do not retry reset if the device has been removed/hot-unplugged
(Igor)
- Add missing newlines to error prints in pata_arasan_cf driver (Haoyu)
- Use the correct SCSI host byte when completing deferred ATA
PASS-THROUGH commands, to avoid the SCSI mid-layer from failing the
commands instead of requeuing (Igor)
* tag 'ata-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: fix requeue of deferred ATA PASS-THROUGH commands
ata: pata_arasan_cf: fix missing newline in dev_err() messages
ata: libata-transport: remove static variable ata_scsi_transport_template
ata: libata-transport: split struct ata_internal
ata: libata-transport: use static struct ata_transport_internal to simplify match functions
ata: libata-transport: inline ata_attach|release_transport
ata: libata-transport: instantiate struct ata_internal statically
ata: libata-eh: Do not retry reset if the device is gone
ata: libahci_platform: use flex array for platform PHYs
ata: libata-transport: remove redundant dynamic sysfs attributes
ata: libata-scsi: refactor ata_scsiop_maint_in()
ata: libata-eh: avoid unnecessary calls to ata_scsi_port_error_handler()
ata: ahci-dwc: Remove not-going-to-be-supported code for Baikal SoC
ata: libata-scsi: rename and improve ata_qc_done()
ata: libata-scsi: make ata_scsi_simulate() static
ata: libata-scsi: simplify ata_scsi_requeue_deferred_qc()
ata: libata-sata: simplify ata_sas_queuecmd()
ata: libata-core: improve tag checks in ata_qc_issue()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Lenovo Yoga/Legion fan monitoring (yogafan)
- LattePanda Sigma EC
- Infineon XDP720 eFuse
- Microchip MCP998X
New device support:
- TI INA234
- Infineon XDPE1A2G5B/7B
- Renesas RAA228942 and RAA228943 (isl68137)
- Delta Q54SN120A1 and Q54SW120A7 (pmbus)
- TI TMP110 and TMP113 (tmp102)
- Sony APS-379 (pmbus)
- ITE IT8689E (it87)
- ASUS ROG STRIX Z790-H, X470-F, and CROSSHAIR X670E (asus-ec-sensors)
- GPD Win 5 (gpd-fan)
Modernization and Cleanups:
- Convert asus_atk0110 and acpi_power_meter ACPI drivers to platform
drivers
- Remove i2c_match_id() usage in many PMBus drivers
- Use guard() for mutex protection in pmbus_core
- Replace sprintf() with sysfs_emit() in ads7871, emc1403, max6650,
ads7828, max31722, and tc74
- Various markup and documentation improvements for yogafan and
ltc4282
Bug fixes:
- Fix use-after-free and missing usb_kill_urb on disconnect in powerz
driver
- Avoid cacheline sharing for DMA buffer in powerz driver
- Fix integer overflow in power calculation on 32-bit in isl28022
driver
- Fix bugs in pt5161l_read_block_data()
- Propagate SPI errors and fix incorrect error codes in ads7871
driver
- Fix i2c_smbus_write_byte_data wrapper argument type in max31785
driver
Device tree bindings:
- Convert npcm750-pwm-fan to DT schema
- Add bindings for Infineon XDP720, Microchip MCP998X, Sony APS-379,
Renesas RAA228942/3, Delta Q54SN120A1/7, XDPE1A2G5B/7B, Aosong
AHT10/20, DHT20, and TI INA234
- Adapt moortec,mr75203 bindings for T-Head TH1520"
* tag 'hwmon-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (82 commits)
hwmon: (ina233) Don't check for specific errors when parsing properties
hwmon: (isl28022) Don't check for specific errors when parsing properties
hwmon: (pmbus/tps25990) Don't check for specific errors when parsing properties
hwmon: (nct6683) Add customer ID for ASRock B650I Lightning WiFi
hwmon:(pmbus/xdp720) Add support for efuse xdp720
dt-bindings: hwmon/pmbus: Add Infineon XDP720
hwmon: add support for MCP998X
dt-bindings: hwmon: add support for MCP998X
hwmon: (powerz) Avoid cacheline sharing for DMA buffer
hwmon: (isl28022) Fix integer overflow in power calculation on 32-bit
hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data()
hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt
hwmon: (powerz) Fix use-after-free on USB disconnect
hwmon: pmbus: Add support for Sony APS-379
dt-bindings: trivial-devices: Add sony,aps-379
hwmon: (yogafan) various markup improvements
hwmon: (sparx5) Make it selectable for ARCH_LAN969X
hwmon: (tmp102) add support for update interval
hwmon: (yogafan) fix markup warning
hwmon: (yogafan) Add support for Lenovo Yoga/Legion fan monitoring
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A busy release for SPI, almost all of it in a couple of larger fix and
cleanup series for patterns that affected many drivers. We do have a
couple of core API additions as well, relatively application specific
but they enable some new use cases.
- A packed command operation for spi-mem devices
- Improvements to the ancillary device support to enable some IIO use
cases from Antoniu Miclaus
- Fixes for a registration ordering issue pattern caused by the
handover between allocation and registration of controllers in
concert with devm from Johan Hovold
- Improvements to handling of clock allocation from Pei Xiao
- Cleanups in the fsl-lpspi driver from Marc Kleine-Budde
- Support for Renesas RZ/G3E and RZ/G3L"
* tag 'spi-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (115 commits)
spi: sn-f-ospi: fix incorrect return code for invalid num-cs
spi: spi-mem: Add a packed command operation
spi: cadence-qspi: Revert the filtering of certain opcodes in ODTR
spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback
spi: s3c64xx: fix NULL-deref on driver unbind
spi: zynq-qspi: fix controller deregistration
spi: zynqmp-gqspi: fix controller deregistration
spi: uniphier: fix controller deregistration
spi: ti-qspi: fix controller deregistration
spi: tegra20-sflash: fix controller deregistration
spi: tegra114: fix controller deregistration
spi: syncuacer: fix controller deregistration
spi: sun6i: fix controller deregistration
spi: sun4i: fix controller deregistration
spi: st-ssc4: fix controller deregistration
spi: sprd: fix controller deregistration
spi: slave-mt27xx: fix controller deregistration
spi: sifive: fix controller deregistration
spi: sh-msiof: fix controller deregistration
spi: sh-hspi: fix controller deregistration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This has been quite a busy release for regmap, the user visible
changes are quite minor but there's some quite good work on internal
code improvements:
- Cleanup helper for __free()ing regmap_fields
- Support non-devm I3C regmaps
- A bunch of cleanup work, mostly from Andy Shevchenko
- Fix for bootstrapping issues with hardware initialised regmaps,
which was the main inspiration for some of the cleanups"
* tag 'regmap-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: i3c: Add non-devm regmap_init_i3c() helper
regmap: debugfs: fix race condition in dummy name allocation
regmap: Synchronize cache for the page selector
regmap: Simplify devres handling
regcache: Move HW readback after cache initialisation
regcache: Allocate and free reg_defaults on the same level
regcache: Move count check and cache_bypass assignment to the caller
regcache: Factor out regcache_hw_exit() helper
regcache: Amend printf() specifiers when printing registers
regcache: Define iterator inside for-loop and align their types
regmap: define cleanup helper for regmap_field
regmap: sort header includes
regcache: Split regcache_count_cacheable_registers() helper
regcache: Remove duplicate check in regcache_hw_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Extend statistics for domain idle states with s2idle data
- Show latency/residency for domain idle states in debugfs
pmdomain providers:
- imx: Add support for optional subnodes for imx93-blk-ctrl
- marvell: Add audio power island for Marvell PXA1908
- mediatek:
- Add legacy support for the MT7622 audio power domain
- Add nvmem provider functionality to the mtk-mfg-pmdomain
- Add support for the MT8189 power domains
- qcom: Add support for the Eliza and Hawi power domains
- sunxi: Add support for the Allwinner A733 power domains
- ti: Handle wakeup constraints for out-of-band wakeups for ti_sci"
* tag 'pmdomain-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (32 commits)
pmdomain: qcom: rpmhpd: Add power domains for Hawi SoC
dt-bindings: power: qcom,rpmhpd: Add RPMh power domain for Hawi SoC
pmdomain: qcom: cpr: add COMPILE_TEST support
PM: domains: De-constify fields in struct dev_pm_domain_attach_data
pmdomain: qcom: cpr: simplify main allocation
pmdomain: bcm: bcm2835-power: Replace open-coded polling with readl_poll_timeout_atomic()
pmdomain: sunxi: Add support for A733 to Allwinner PCK600 driver
pmdomain: qcom: rpmhpd: Add Eliza RPMh Power Domains
pmdomain: arm: Add print after a successful probe for SCMI power domains
pmdomain: rockchip: quiet regulator error on -EPROBE_DEFER
pmdomain: mediatek: Add power domain driver for MT8189 SoC
pmdomain: mediatek: Add bus protect control flow for MT8189
pmdomain: core: Extend statistics for domain idle states with s2idle data
pmdomain: core: Show latency/residency for domain idle states in debugfs
pmdomain: core: Restructure domain idle states data for genpd in debugfs
pmdomain: qcom: rpmpd: drop stray semicolon
pmdomain: imx: scu-pd: Fix device_node reference leak during ->probe()
pmdomain: ti: omap_prm: Fix a reference leak on device node
pmdomain: mediatek: scpsys: Add MT7622 Audio power domain to legacy driver
pmdomain: mediatek: Simplify with scoped for each OF child loop
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add NXP vendor and IW61x device IDs for WiFi chips over SDIO
- Add quirk for incorrect manufacturing date
- Add support for manufacturing date beyond 2025
- Optimize support for secure erase/trim for some Kingston eMMCs
- Remove support for the legacy "enable-sdio-wakeup" DT property
- Use single block writes in the retry path
MMC host:
- dw_mmc:
- A great amount of cleanups/simplifications to improve the code
- Add clk_phase_map support
- Remove mshc DT alias support
- dw_mmc-rockchip:
- Fix runtime PM support for internal phase
- Add support for the RV1103B variant
- loongson2:
- Add support for the Loongson-2K0300 SD/SDIO/eMMC controller
- mtk-sd:
- Add support for the MT8189 variant
- renesas_sdhi_core:
- Add support for selecting an optional mux
- rtsx_pci_sdmmc:
- Simplify voltage switch handling
- sdhci:
- Stop advertising the driver in dmesg
- sdhci-esdhc-imx:
- Add 1-bit bus width support
- Add support for the NXP S32N79 variant
- sdhci-msm:
- Add support for the IPQ5210 and IPQ9650 variants
- Add support for wrapped keys
- Enable ICE for CQE-capable controllers with non-CQE cards
- sdhci-of-arasan:
- Add support for the Axiado AX3000 variant
- sdhci-of-aspeed:
- Add support for the AST2700 variant
- sdhci-of-bst:
- Add driver for the Black Sesame Technologies C1200 controller
- sdhci-of-dwcmshc:
- Add support for the Canaan K230 variant
- Add support for the HPE GSC variant
- Prevent clock glitches to avoid malfunction
- sdhci-of-k1:
- Add support for the K3 variant
mux core/consumers:
- core:
- Add helper functions for getting optional and selected mux-state
- i2c-omap:
- Convert to devm_mux_state_get_optional_selected()
- phy-renesas:
- Convert to devm_mux_state_get_optional_selected()
- phy-can-transceiver:
- Convert to devm_mux_state_get_optional()"
* tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (131 commits)
mmc: sdhci-msm: Fix the wrapped key handling
mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration
mmc: core: Simplify with scoped for each OF child loop
mmc: core: Optimize size of struct mmc_queue_req
mmc: vub300: clean up module init
mmc: vub300: rename probe error labels
mmc: dw_mmc: Remove dw_mci_start_request wrapper and rename core function
mmc: dw_mmc: Inline dw_mci_queue_request() into dw_mci_request()
mmc: block: Use MQRQ_XFER_SINGLE_BLOCK for both read and write recovery
mmc: mmc_test: Replace hard-coded values with macros and consolidate test parameters
mmc: block: Convert to use DEFINE_SIMPLE_DEV_PM_OPS()
mmc: core: Replace the hard-coded shift value 9 with SECTOR_SHIFT
mmc: sdhci-dwcmshc: Refactor Rockchip platform data for controller revisions
mmc: core: Switch to use pm_ptr() for mmc_host_class_dev_pm_ops
mmc: core: Remove legacy 'enable-sdio-wakeup' DT property support
mmc: mmc_test: use kzalloc_flex
mmc: mtk-sd: disable new_tx/rx and modify related settings for mt8189
dt-bindings: mmc: hisilicon,hi3660-dw-mshc: Convert to DT schema
dt-bindings: mmc: sdhci-msm: add IPQ9650 compatible
mmc: block: use single block write in retry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- cgroup sub-scheduler groundwork
Multiple BPF schedulers can be attached to cgroups and the dispatch
path is made hierarchical. This involves substantial restructuring of
the core dispatch, bypass, watchdog, and dump paths to be
per-scheduler, along with new infrastructure for scheduler ownership
enforcement, lifecycle management, and cgroup subtree iteration
The enqueue path is not yet updated and will follow in a later cycle
- scx_bpf_dsq_reenq() generalized to support any DSQ including remote
local DSQs and user DSQs
Built on top of this, SCX_ENQ_IMMED guarantees that tasks dispatched
to local DSQs either run immediately or get reenqueued back through
ops.enqueue(), giving schedulers tighter control over queueing
latency
Also useful for opportunistic CPU sharing across sub-schedulers
- ops.dequeue() was only invoked when the core knew a task was in BPF
data structures, missing scheduling property change events and
skipping callbacks for non-local DSQ dispatches from ops.select_cpu()
Fixed to guarantee exactly one ops.dequeue() call when a task leaves
BPF scheduler custody
- Kfunc access validation moved from runtime to BPF verifier time,
removing runtime mask enforcement
- Idle SMT sibling prioritization in the idle CPU selection path
- Documentation, selftest, and tooling updates. Misc bug fixes and
cleanups
* tag 'sched_ext-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (134 commits)
tools/sched_ext: Add explicit cast from void* in RESIZE_ARRAY()
sched_ext: Make string params of __ENUM_set() const
tools/sched_ext: Kick home CPU for stranded tasks in scx_qmap
sched_ext: Drop spurious warning on kick during scheduler disable
sched_ext: Warn on task-based SCX op recursion
sched_ext: Rename scx_kf_allowed_on_arg_tasks() to scx_kf_arg_task_ok()
sched_ext: Remove runtime kfunc mask enforcement
sched_ext: Add verifier-time kfunc context filter
sched_ext: Drop redundant rq-locked check from scx_bpf_task_cgroup()
sched_ext: Decouple kfunc unlocked-context check from kf_mask
sched_ext: Fix ops.cgroup_move() invocation kf_mask and rq tracking
sched_ext: Track @p's rq lock across set_cpus_allowed_scx -> ops.set_cpumask
sched_ext: Add select_cpu kfuncs to scx_kfunc_ids_unlocked
sched_ext: Drop TRACING access to select_cpu kfuncs
selftests/sched_ext: Fix wrong DSQ ID in peek_dsq error message
sched_ext: Documentation: improve accuracy of task lifecycle pseudo-code
selftests/sched_ext: Improve runner error reporting for invalid arguments
sched_ext: Documentation: Fix scx_bpf_move_to_local kfunc name
sched_ext: Documentation: Add ops.dequeue() to task lifecycle
tools/sched_ext: Fix off-by-one in scx_sdt payload zeroing
...
|
|
Pull workqueue updates from Tejun Heo:
- New default WQ_AFFN_CACHE_SHARD affinity scope subdivides LLCs into
smaller shards to improve scalability on machines with many CPUs per
LLC
- Misc:
- system_dfl_long_wq for long unbound works
- devm_alloc_workqueue() for device-managed allocation
- sysfs exposure for ordered workqueues and the EFI workqueue
- removal of HK_TYPE_WQ from wq_unbound_cpumask
- various small fixes
* tag 'wq-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (21 commits)
workqueue: validate cpumask_first() result in llc_populate_cpu_shard_id()
workqueue: use NR_STD_WORKER_POOLS instead of hardcoded value
workqueue: avoid unguarded 64-bit division
docs: workqueue: document WQ_AFFN_CACHE_SHARD affinity scope
workqueue: add test_workqueue benchmark module
tools/workqueue: add CACHE_SHARD support to wq_dump.py
workqueue: set WQ_AFFN_CACHE_SHARD as the default affinity scope
workqueue: add WQ_AFFN_CACHE_SHARD affinity scope
workqueue: fix typo in WQ_AFFN_SMT comment
workqueue: Remove HK_TYPE_WQ from affecting wq_unbound_cpumask
workqueue: unlink pwqs from wq->pwqs list in alloc_and_link_pwqs() error path
workqueue: Remove NULL wq WARN in __queue_delayed_work()
workqueue: fix parse_affn_scope() prefix matching bug
workqueue: devres: Add device-managed allocate workqueue
workqueue: Add system_dfl_long_wq for long unbound works
tools/workqueue/wq_dump.py: add NODE prefix to all node columns
tools/workqueue/wq_dump.py: fix column alignment in node_nr/max_active section
tools/workqueue/wq_dump.py: remove backslash separator from node_nr/max_active header
efi: Allow to expose the workqueue via sysfs
workqueue: Allow to expose ordered workqueues via sysfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cgroup_file_notify() locking converted from a global lock to
per-cgroup_file spinlock with a lockless fast-path when no
notification is needed
- Misc changes including exposing cgroup helpers for sched_ext and
minor fixes
* tag 'cgroup-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/rdma: fix swapped arguments in pr_warn() format string
cgroup/dmem: remove region parameter from dmemcg_parse_limit
cgroup: replace global cgroup_file_kn_lock with per-cgroup_file lock
cgroup: add lockless fast-path checks to cgroup_file_notify()
cgroup: reduce cgroup_file_kn_lock hold time in cgroup_file_notify()
cgroup: Expose some cgroup helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Nothing too thrilling here, but we see lots of driver updates and bug
fixes, including quirk additions and refactoring works, while there
have been little changes in the core functionality. Here are some
highlights:
Core:
- Add validation for the control API put callback
- Fixes in compress-offload API timestamp handling
- Continued ASoC core API cleanups
ASoC:
- Add support for bus keepers (for Apple devices in future)
- Enhancements to the SDCA support, including retaskable jacks
- Test improvements for Cirrus Logic drivers
- Lots of fixes for the NXP, nVidia and Qualcomm
- Support for AMD RPL DMIC, Cirrus Logic CS42L43 and CS47L47, nVidia
machines with CPCAP and WM8962
USB-audio:
- Quirks for Huawei Headset, Focusrite Novation, MV-Silicon, Studio
1824, Arturia AF16Rig, Hotone Audio, Feaulle Rainbow, PreSonus
AudioBox, Moondrop Ju Jiu, Scarlett 18i20, etc
- Extended mixer volume quirk handling
- UAF and other fixes for us144mkii, 6fire and caiaq drivers
HD-audio:
- Add quirks or fixes for Acer, Lenovo, HP, ASUS machines
- Fixes & cleanups of GPIO helper code
Misc:
- Add suspend/resume support for multiple legacy ISA and Apple
drivers
- Further regression fixes for ctxfi driver"
* tag 'sound-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (359 commits)
ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()
ALSA: usb-audio: Fix missing error handling for get_min_max*()
ALSA: hda/realtek - fixed speaker no sound update
ALSA: hda/realtek: Add quirk for Acer PT316-51S headset mic
ALSA: usb-audio: Exclude Scarlett 18i20 1st Gen from SKIP_IFACE_SETUP
ALSA: hda/realtek: Add quirk for Legion S7 15IMH
ALSA: hda/realtek: Add quirk for HP Spectre x360 14-ea
ALSA: caiaq: take a reference on the USB device in create_card()
ASoC: dt-bindings: rockchip: convert rk3399-gru-sound to DT Schema
ALSA: sscape: Add suspend and resume support
ALSA: sscape: Cache per-card resources for board reinitialization
ALSA: usb-audio: Do not expose sticky mixers
ALSA: usb-audio: Move volume control resolution check into a function
ALSA: usb-audio: Add error checks against get_min_max*()
ALSA: usb-audio: Add quirk for PreSonus AudioBox USB
ALSA: interwave: guard PM-only restore helpers with CONFIG_PM
ALSA: usb-audio: Evaluate packsize caps at the right place
ALSA: sc6000: Restore board setup across suspend
ALSA: sc6000: Keep the programmed board state in card-private data
ALSA: 6fire: fix use-after-free on disconnect
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- new DRM RAS infrastructure using netlink
- amdgpu: enable DC on CIK APUs, and more IP enablement, and more
user queue work
- xe: purgeable BO support, and new hw enablement
- dma-buf : add revocable operations
Full summary:
mm:
- two-pass MMU interval notifiers
- add gpu active/reclaim per-node stat counters
math:
- provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI
- implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST()
rust:
- shared tag with driver-core: register macro and io infra
- core: rework DMA coherent API
- core: add interop::list to interop with C linked lists
- core: add more num::Bounded operations
- core: enable generic_arg_infer and add EMSGSIZE
- workqueue: add ARef<T> support for work and delayed work
- add GPU buddy allocator abstraction
- add DRM shmem GEM helper abstraction
- allow drm:::Device to dispatch work and delayed work items
to driver private data
- add dma_resv_lock helper and raw accessors
core:
- introduce DRM RAS infrastructure over netlink
- add connector panel_type property
- fourcc: add ARM interleaved 64k modifier
- colorop: add destroy helper
- suballoc: split into alloc and init helpers
- mode: provide DRM_ARGB_GET*() macros for reading color components
edid:
- provide drm_output_color_Format
dma-buf:
- provide revoke mechanism for shared buffers
- rename move_notify to invalidate_mappings
- always enable move_notify
- protect dma_fence_ops with RCU and improve locking
- clean pages with helpers
atomic:
- allocate drm_private_state via callback
- helper: use system_percpu_wq
buddy:
- make buddy allocator available to gpu level
- add kernel-doc for buddy allocator
- improve aligned allocation
ttm:
- fix fence signalling
- improve tests and docs
- improve handling of gfp_retry_mayfail
- use per-node stat counters to track memory allocations
- port pool to use list_lru
- drop NUMA specific pools
- make pool shrinker numa aware
- track allocated pages per numa node
coreboot:
- cleanup coreboot framebuffer support
sched:
- fix race condition in drm_sched_fini
pagemap:
- enable THP support
- pass pagemap_addr by reference
gem-shmem:
- Track page accessed/dirty status across mmap/vmap
gpusvm:
- reenable device to device migration
- fix unbalanced unclock
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve
others
- fsl-ldb: Fix visual artifacts plus related DT property
'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus
DT bindings
- anx7625: Fix USB Type-C handling
- cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check
- Support Lontium LT8713SX DP MST bridge plus DT bindings
- analogix_dp: Use DP helpers for link training
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN
N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- panel-edp: Fix timings for BOE NV140WUM-N64
- ilitek-ili9882t: Allow GPIO calls to sleep
- jadard: Support TAIGUAN XTI05101-01A
- lxd: Support LXD M9189A plus DT bindings
- mantix: Fix pixel clock; Clean up
- motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings
- novatek: Support Novatek/Tianma NT37700F plus DT bindings
- simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip
PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3"
- novatek-nt36672a: Use mipi_dsi_*_multi() functions
- panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW
MNF307QS3-2
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support
backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
amdgpu:
- enable DC by default on CIK APUs
- userq fence ioctl param size fixes
- set panel_type to OLED for eDP
- refactor DC i2c code
- FAMS2 update
- rework ttm handling to allow multiple engines
- DC DCE 6.x cleanup
- DC support for NUTMEG/TRAVIS DP bridge
- DCN 4.2 support
- GC12 idle power fix for compute
- use struct drm_edid in non-DC code
- enable NV12/P010 support on primary planes
- support newer IP discovery tables
- VCN/JPEG 5.0.2 support
- GC/MES 12.1 updates
- USERQ fixes
- add DC idle state manager
- eDP DSC seamless boot
amdkfd:
- GC 12.1 updates
- non 4K page fixes
xe:
- basic Xe3p_LPG and NVL-P enabling patches
- allow VM_BIND decompress support
- add purgeable buffer object support
- add xe_vm_get_property_ioctl
- restrict multi-lrc to VCS/VECS engines
- allow disabling VM overcommit in fault mode
- dGPU memory optimizations
- Workaround cleanups and simplification
- Allow VFs VRAM quote changes using sysfs
- convert GT stats to per-cpu counters
- pagefault refactors
- enable multi-queue on xe3p_xpc
- disable DCC on PTL
- make MMIO communication more robust
- disable D3Cold for BMG on specific platforms
- vfio: improve FLR sync for Xe VFIO
i915/display:
- C10/C20/LT PHY PLL divider verification
- use trans push mechanism to generate PSR frame change on LNL+
- refactor DP DSC slice config
- VGA decode refactoring
- refactor DPT, gen2-4 overlay, masked field register macro helpers
- refactor stolen memory allocation decisions
- prepare for UHBR DP tunnels
- refactor LT PHY PLL to use DPLL framework
- implement register polling/waiting in display code
- add shared stepping header between i915 and display
i915:
- fix potential overflow of shmem scatterlist length
nouveau:
- provide Z cull info to userspace
- initial GA100 support
- shutdown on PCI device shutdown
nova-core:
- harden GSP command queue
- add support for large RPCs
- simplify GSP sequencer and message handling
- refactor falcon firmware handling
- convert to new register macro
- conver to new DMA coherent API
- use checked arithmetic
- add debugfs support for gsp-rm log buffers
- fix aux device registration for multi-GPU
msm:
- CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
- Core:
- Switched to of_get_available_child_by_name()
- DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
- DP:
- Removed debug prints looking into PHY internals
- DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
- GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- HDMI:
- Fixed infoframes programming
- MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
panthor:
- add tracepoints for power and IRQs
- fix fence handling
- extend timestamp query with flags
- support various sources for timestamp queries
tyr:
- fix names and model/versions
rockchip:
- vop2: use drm logging function
- rk3576 displayport support
- support CRTC background color
atmel-hlcdc:
- support sana5d65 LCD controller
tilcdc:
- use DT bindings schema
- use managed DRM interfaces
- support DRM_BRIDGE_ATTACH_NO_CONNECTOR
verisilicon:
- support DC8200 + DT bindings
virtgpu:
- support PRIME import with 3D enabled
komeda:
- fix integer overflow in AFBC checks
mcde:
- improve bridge handling
gma500:
- use drm client buffer for fbdev framebuffer
amdxdna:
- add sensors ioctls
- provide NPU power estimate
- support column utilization sensor
- allow forcing DMA through IOMMU IOVA
- support per-BO mem usage queries
- refactor GEM implementation
ivpu:
- update boot API to v3.29.4
- limit per-user number of doorbells/contexts
- perform engine reset on TDR error
loongson:
- replace custom code with drm_gem_ttm_dumb_map_offset()
imx:
- support planes behind the primary plane
- fix bus-format selection
vkms:
- support CRTC background color
v3d:
- improve handling of struct v3d_stats
komeda:
- support Arm China Linlon D6 plus DT bindings
imagination:
- improve power-off sequence
- support context-reset notification from firmware
mediatek:
- mtk_dsi: enable hs clock during pre-enable
- Remove all conflicting aperture devices during probe
- Add support for mt8167 display blocks"
* tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel: (1735 commits)
drm/ttm/tests: Remove checks from ttm_pool_free_no_dma_alloc
drm/ttm/tests: fix lru_count ASSERT
drm/vram: remove DRM_VRAM_MM_FILE_OPERATIONS from docs
drm/fb-helper: Fix a locking bug in an error path
dma-fence: correct kernel-doc function parameter @flags
ttm/pool: track allocated_pages per numa node.
ttm/pool: make pool shrinker NUMA aware (v2)
ttm/pool: drop numa specific pools
ttm/pool: port to list_lru. (v2)
drm/ttm: use gpu mm stats to track gpu memory allocations. (v4)
mm: add gpu active/reclaim per-node stat counters (v2)
gpu: nova-core: fix missing colon in SEC2 boot debug message
gpu: nova-core: vbios: use from_le_bytes() for PCI ROM header parsing
gpu: nova-core: bitfield: fix broken Default implementation
gpu: nova-core: falcon: pad firmware DMA object size to required block alignment
gpu: nova-core: gsp: fix undefined behavior in command queue code
drm/shmem_helper: Make sure PMD entries get the writeable upgrade
accel/ivpu: Trigger recovery on TDR with OS scheduling
drm/msm: Use of_get_available_child_by_name()
dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"A major refactorization by Thomas Zimmermann from SUSE regarding
handling of console font data, addition of helpers for console font
rotation and split into individual components for glyphs, fonts and
the overall fbcon state.
And there is the round of usual code cleanups and fixes:
Cleanups:
- atyfb: Remove unused fb_list (Geert Uytterhoeven)
- goldfishfb, wmt_ge_rops: use devm_platform_ioremap_resource() (Amin GATTOUT)
- matroxfb: Mark variable with __maybe_unused (Andy Shevchenko)
- omapfb: Add missing error check for clk_get() (Chen Ni)
- tdfxfb: Make the VGA register initialisation a bit more obvious (Daniel Palmer)
- macfb: Replace deprecated strcpy with strscpy (Thorsten Blum)
Fixes:
- tdfxfb, udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO (Greg Kroah-Hartman)
- omap2: fix inconsistent lock returns in omapfb_mmap (Hongling Zeng)
- viafb: check ioremap return value in viafb_lcd_get_mobile_state (Wang Jun)"
* tag 'fbdev-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (40 commits)
fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO
fbdev: tdfxfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO
fbdev: omap2: fix inconsistent lock returns in omapfb_mmap
MAINTAINERS: Add dedicated entry for fbcon
fbcon: Put font-rotation state into separate struct
fbcon: Fill cursor mask in helper function
lib/fonts: Implement font rotation
lib/fonts: Refactor glyph-rotation helpers
lib/fonts: Refactor glyph-pattern helpers
lib/fonts: Implement glyph rotation
lib/fonts: Clean up Makefile
lib/fonts: Provide helpers for calculating glyph pitch and size
vt: Implement helpers for struct vc_font in source file
fbcon: Avoid OOB font access if console rotation fails
fbdev: atyfb: Remove unused fb_list
fbdev: matroxfb: Mark variable with __maybe_unused to avoid W=1 build break
fbdev: update help text for CONFIG_FB_NVIDIA
fbdev: omapfb: Add missing error check for clk_get()
fbdev: viafb: check ioremap return value in viafb_lcd_get_mobile_state
lib/fonts: Remove internal symbols and macros from public header file
...
|
