| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13f4 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346ca ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller triggers an invalid memory access issue following fault
injection in update_effective_progs. The issue can be described as
follows:
__cgroup_bpf_detach
update_effective_progs
compute_effective_progs
bpf_prog_array_alloc <-- fault inject
purge_effective_progs
/* change to dummy_bpf_prog */
array->items[index] = &dummy_bpf_prog.prog
---softirq start---
__do_softirq
...
__cgroup_bpf_run_filter_skb
__bpf_prog_run_save_cb
bpf_prog_run
stats = this_cpu_ptr(prog->stats)
/* invalid memory access */
flags = u64_stats_update_begin_irqsave(&stats->syncp)
---softirq end---
static_branch_dec(&cgroup_bpf_enabled_key[atype])
The reason is that fault injection caused update_effective_progs to fail
and then changed the original prog into dummy_bpf_prog.prog in
purge_effective_progs. Then a softirq came, and accessing the members of
dummy_bpf_prog.prog in the softirq triggers invalid mem access.
To fix it, skip updating stats when stats is NULL.
Fixes: 492ecee892c2 ("bpf: enable program stats")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20251115102343.2200727-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
syzbot found that cls_bpf_classify() is able to change
tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214
struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched:
Extend qdisc control block with tc control block"), which added a wrong
interaction with db58ba459202 ("bpf: wire in data and data_end for
cls_act_bpf").
drop_reason was added later.
Add bpf_prog_run_data_pointers() helper to save/restore the net_sched
storage colliding with BPF data_meta/data_end.
Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block")
Reported-by: syzbot <syzkaller@googlegroups.com>
Closes: https://lore.kernel.org/netdev/6913437c.a70a0220.22f260.013b.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251112125516.1563021-1-edumazet@google.com
|
|
Currently bpf_dynptr_from_skb_meta() marks the dynptr as read-only when
the skb is cloned, preventing writes to metadata.
Remove this restriction and unclone the skb head on bpf_dynptr_write() to
metadata, now that the metadata is preserved during uncloning. This makes
metadata dynptr consistent with skb dynptr, allowing writes regardless of
whether the skb is cloned.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-3-5ceb08a9b37b@cloudflare.com
|
|
Change struct bpf_sock_addr_kern to use sockaddr_unsized for the "uaddr"
field instead of sockaddr. This improves type safety in the BPF cgroup
socket address filtering code.
The casting in __cgroup_bpf_run_filter_sock_addr() is updated to match the
new type, removing an unnecessary cast in the initialization and updating
the conditional assignment to use the appropriate sockaddr_unsized cast.
Additionally rename the "unspec" variable to "storage" to better align
with its usage.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-7-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, signed load instructions into arena memory are unsupported.
The compiler is free to generate these, and on GCC-14 we see a
corresponding error when it happens. The hurdle in supporting them is
deciding which unused opcode to use to mark them for the JIT's own
consumption. After much thinking, it appears 0xc0 / BPF_NOSPEC can be
combined with load instructions to identify signed arena loads. Use
this to recognize and JIT them appropriately, and remove the verifier
side limitation on the program if the JIT supports them.
Co-developed-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20250923110157.18326-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Merge skb-meta-dynptr branch into master branch after fixing a compiler
warning. No conflict.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Kernel Test Robot reported a compiler warning - a null pointer may be
passed to memmove in __bpf_dynptr_{read,write} when building without
networking support.
The warning is correct from a static analysis standpoint, but not actually
reachable. Without CONFIG_NET, creating dynptrs to skb metadata is
impossible since the constructor kfunc is missing.
Silence the false-postive diagnostic message by returning an error pointer
from bpf_skb_meta_pointer stub when CONFIG_NET=n.
Fixes: 6877cd392bae ("bpf: Enable read/write access to skb metadata through a dynptr")
Closes: https://lore.kernel.org/oe-kbuild-all/202508212031.ir9b3B6Q-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250901-dynptr-skb-meta-no-net-v2-1-ce607fcb6091@cloudflare.com
|
|
Now that there's a proper SHA-1 library API, just use that instead of
the low-level SHA-1 compression function. This eliminates the need for
bpf_prog_calc_tag() to implement the SHA-1 padding itself. No
functional change; the computed tags remain the same.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250811201615.564461-1-ebiggers@kernel.org
|
|
Merge 'skb-meta-dynptr' branch into 'master' branch. No conflict.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Now that we can create a dynptr to skb metadata, make reads to the metadata
area possible with bpf_dynptr_read() or through a bpf_dynptr_slice(), and
make writes to the metadata area possible with bpf_dynptr_write() or
through a bpf_dynptr_slice_rdwr().
Note that for cloned skbs which share data with the original, we limit the
skb metadata dynptr to be read-only since we don't unclone on a
bpf_dynptr_write to metadata.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250814-skb-metadata-thru-dynptr-v7-2-8a39e636e0fb@cloudflare.com
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250811-restricted-pointers-bpf-v1-1-a1d7cc3cb9e7@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Remove usermode driver (UMD) framework (Thomas Weißschuh)
- Introduce Strongly Connected Component (SCC) in the verifier to
detect loops and refine register liveness (Eduard Zingerman)
- Allow 'void *' cast using bpf_rdonly_cast() and corresponding
'__arg_untrusted' for global function parameters (Eduard Zingerman)
- Improve precision for BPF_ADD and BPF_SUB operations in the verifier
(Harishankar Vishwanathan)
- Teach the verifier that constant pointer to a map cannot be NULL
(Ihor Solodrai)
- Introduce BPF streams for error reporting of various conditions
detected by BPF runtime (Kumar Kartikeya Dwivedi)
- Teach the verifier to insert runtime speculation barrier (lfence on
x86) to mitigate speculative execution instead of rejecting the
programs (Luis Gerhorst)
- Various improvements for 'veristat' (Mykyta Yatsenko)
- For CONFIG_DEBUG_KERNEL config warn on internal verifier errors to
improve bug detection by syzbot (Paul Chaignon)
- Support BPF private stack on arm64 (Puranjay Mohan)
- Introduce bpf_cgroup_read_xattr() kfunc to read xattr of cgroup's
node (Song Liu)
- Introduce kfuncs for read-only string opreations (Viktor Malik)
- Implement show_fdinfo() for bpf_links (Tao Chen)
- Reduce verifier's stack consumption (Yonghong Song)
- Implement mprog API for cgroup-bpf programs (Yonghong Song)
* tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (192 commits)
selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite
selftests/bpf: Add selftest for attaching tracing programs to functions in deny list
bpf: Add log for attaching tracing programs to functions in deny list
bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions
bpf: Fix various typos in verifier.c comments
bpf: Add third round of bounds deduction
selftests/bpf: Test invariants on JSLT crossing sign
selftests/bpf: Test cross-sign 64bits range refinement
selftests/bpf: Update reg_bound range refinement logic
bpf: Improve bounds when s64 crosses sign boundary
bpf: Simplify bounds refinement from s32
selftests/bpf: Enable private stack tests for arm64
bpf, arm64: JIT support for private stack
bpf: Move bpf_jit_get_prog_name() to core.c
bpf, arm64: Fix fp initialization for exception boundary
umd: Remove usermode driver framework
bpf/preload: Don't select USERMODE_DRIVER
selftests/bpf: Fix test dynptr/test_dynptr_memset_xdp_chunks failure
selftests/bpf: Fix test dynptr/test_dynptr_copy_xdp failure
selftests/bpf: Increase xdp data size for arm64 64K page size
...
|
|
bpf_jit_get_prog_name() will be used by all JITs when enabling support
for private stack. This function is currently implemented in the x86
JIT.
Move the function to core.c so that other JITs can easily use it in
their implementation of private stack.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250724120257.7299-2-puranjay@kernel.org
|
|
Add a new SKB drop reason (SKB_DROP_REASON_PFMEMALLOC) to track packets
dropped due to memory pressure. In production environments, we've observed
memory exhaustion reported by memory layer stack traces, but these drops
were not properly tracked in the SKB drop reason infrastructure.
While most network code paths now properly report pfmemalloc drops, some
protocol-specific socket implementations still use sk_filter() without
drop reason tracking:
- Bluetooth L2CAP sockets
- CAIF sockets
- IUCV sockets
- Netlink sockets
- SCTP sockets
- Unix domain sockets
These remaining cases represent less common paths and could be converted
in a follow-up patch if needed. The current implementation provides
significantly improved observability into memory pressure events in the
network stack, especially for key protocols like TCP and UDP, helping to
diagnose problems in production environments.
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/175268316579.2407873.11634752355644843509.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This changes the semantics of BPF_NOSPEC (previously a v4-only barrier)
to always emit a speculation barrier that works against both Spectre v1
AND v4. If mitigation is not needed on an architecture, the backend
should set bpf_jit_bypass_spec_v4/v1().
As of now, this commit only has the user-visible implication that unpriv
BPF's performance on PowerPC is reduced. This is the case because we
have to emit additional v1 barrier instructions for BPF_NOSPEC now.
This commit is required for a future commit to allow us to rely on
BPF_NOSPEC for Spectre v1 mitigation. As of this commit, the feature
that nospec acts as a v1 barrier is unused.
Commit f5e81d111750 ("bpf: Introduce BPF nospec instruction for
mitigating Spectre v4") noted that mitigation instructions for v1 and v4
might be different on some archs. While this would potentially offer
improved performance on PowerPC, it was dismissed after the following
considerations:
* Only having one barrier simplifies the verifier and allows us to
easily rely on v4-induced barriers for reducing the complexity of
v1-induced speculative path verification.
* For the architectures that implemented BPF_NOSPEC, only PowerPC has
distinct instructions for v1 and v4. Even there, some insns may be
shared between the barriers for v1 and v4 (e.g., 'ori 31,31,0' and
'sync'). If this is still found to impact performance in an
unacceptable way, BPF_NOSPEC can be split into BPF_NOSPEC_V1 and
BPF_NOSPEC_V4 later. As an optimization, we can already skip v1/v4
insns from being emitted for PowerPC with this setup if
bypass_spec_v1/v4 is set.
Vulnerability-status for BPF_NOSPEC-based Spectre mitigations (v4 as of
this commit, v1 in the future) is therefore:
* x86 (32-bit and 64-bit), ARM64, and PowerPC (64-bit): Mitigated - This
patch implements BPF_NOSPEC for these architectures. The previous
v4-only version was supported since commit f5e81d111750 ("bpf:
Introduce BPF nospec instruction for mitigating Spectre v4") and
commit b7540d625094 ("powerpc/bpf: Emit stf barrier instruction
sequences for BPF_NOSPEC").
* LoongArch: Not Vulnerable - Commit a6f6a95f2580 ("LoongArch, bpf: Fix
jit to skip speculation barrier opcode") is the only other past commit
related to BPF_NOSPEC and indicates that the insn is not required
there.
* MIPS: Vulnerable (if unprivileged BPF is enabled) -
Commit a6f6a95f2580 ("LoongArch, bpf: Fix jit to skip speculation
barrier opcode") indicates that it is not vulnerable, but this
contradicts the kernel and Debian documentation. Therefore, I assume
that there exist vulnerable MIPS CPUs (but maybe not from Loongson?).
In the future, BPF_NOSPEC could be implemented for MIPS based on the
GCC speculation_barrier [1]. For now, we rely on unprivileged BPF
being disabled by default.
* Other: Unknown - To the best of my knowledge there is no definitive
information available that indicates that any other arch is
vulnerable. They are therefore left untouched (BPF_NOSPEC is not
implemented, but bypass_spec_v1/v4 is also not set).
I did the following testing to ensure the insn encoding is correct:
* ARM64:
* 'dsb nsh; isb' was successfully tested with the BPF CI in [2]
* 'sb' locally using QEMU v7.2.15 -cpu max (emitted sb insn is
executed for example with './test_progs -t verifier_array_access')
* PowerPC: The following configs were tested locally with ppc64le QEMU
v8.2 '-machine pseries -cpu POWER9':
* STF_BARRIER_EIEIO + CONFIG_PPC_BOOK32_64
* STF_BARRIER_SYNC_ORI (forced on) + CONFIG_PPC_BOOK32_64
* STF_BARRIER_FALLBACK (forced on) + CONFIG_PPC_BOOK32_64
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_EIEIO
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_SYNC_ORI (forced on)
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_FALLBACK (forced on)
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_NONE (forced on)
Most of those cobinations should not occur in practice, but I was not
able to get an PPC e6500 rootfs (for testing PPC_E500 without forcing
it on). In any case, this should ensure that there are no unexpected
conflicts between the insns when combined like this. Individual v1/v4
barriers were already emitted elsewhere.
Hari's ack is for the PowerPC changes only.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=29b74545531f6afbee9fc38c267524326dbfbedf
("MIPS: Add speculation_barrier support")
[2] https://github.com/kernel-patches/bpf/pull/8576
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Henriette Herzog <henriette.herzog@rub.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603211703.337860-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
|
|
Introduce BPF instructions with load-acquire and store-release
semantics, as discussed in [1]. Define 2 new flags:
#define BPF_LOAD_ACQ 0x100
#define BPF_STORE_REL 0x110
A "load-acquire" is a BPF_STX | BPF_ATOMIC instruction with the 'imm'
field set to BPF_LOAD_ACQ (0x100).
Similarly, a "store-release" is a BPF_STX | BPF_ATOMIC instruction with
the 'imm' field set to BPF_STORE_REL (0x110).
Unlike existing atomic read-modify-write operations that only support
BPF_W (32-bit) and BPF_DW (64-bit) size modifiers, load-acquires and
store-releases also support BPF_B (8-bit) and BPF_H (16-bit). As an
exception, however, 64-bit load-acquires/store-releases are not
supported on 32-bit architectures (to fix a build error reported by the
kernel test robot).
An 8- or 16-bit load-acquire zero-extends the value before writing it to
a 32-bit register, just like ARM64 instruction LDARH and friends.
Similar to existing atomic read-modify-write operations, misaligned
load-acquires/store-releases are not allowed (even if
BPF_F_ANY_ALIGNMENT is set).
As an example, consider the following 64-bit load-acquire BPF
instruction (assuming little-endian):
db 10 00 00 00 01 00 00 r0 = load_acquire((u64 *)(r1 + 0x0))
opcode (0xdb): BPF_ATOMIC | BPF_DW | BPF_STX
imm (0x00000100): BPF_LOAD_ACQ
Similarly, a 16-bit BPF store-release:
cb 21 00 00 10 01 00 00 store_release((u16 *)(r1 + 0x0), w2)
opcode (0xcb): BPF_ATOMIC | BPF_H | BPF_STX
imm (0x00000110): BPF_STORE_REL
In arch/{arm64,s390,x86}/net/bpf_jit_comp.c, have
bpf_jit_supports_insn(..., /*in_arena=*/true) return false for the new
instructions, until the corresponding JIT compiler supports them in
arena.
[1] https://lore.kernel.org/all/20240729183246.4110549-1-yepeilin@google.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/a217f46f0e445fbd573a1a024be5c6bf1d5fe716.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement support in the verifier for replacing may_goto implementation
from a counter-based approach to one which samples time on the local CPU
to have a bigger loop bound.
We implement it by maintaining 16-bytes per-stack frame, and using 8
bytes for maintaining the count for amortizing time sampling, and 8
bytes for the starting timestamp. To minimize overhead, we need to avoid
spilling and filling of registers around this sequence, so we push this
cost into the time sampling function 'arch_bpf_timed_may_goto'. This is
a JIT-specific wrapper around bpf_check_timed_may_goto which returns us
the count to store into the stack through BPF_REG_AX. All caller-saved
registers (r0-r5) are guaranteed to remain untouched.
The loop can be broken by returning count as 0, otherwise we dispatch
into the function when the count drops to 0, and the runtime chooses to
refresh it (by returning count as BPF_MAX_TIMED_LOOPS) or returning 0
and aborting the loop on next iteration.
Since the check for 0 is done right after loading the count from the
stack, all subsequent cond_break sequences should immediately break as
well, of the same loop or subsequent loops in the program.
We pass in the stack_depth of the count (and thus the timestamp, by
adding 8 to it) to the arch_bpf_timed_may_goto call so that it can be
passed in to bpf_check_timed_may_goto as an argument after r1 is saved,
by adding the offset to r10/fp. This adjustment will be arch specific,
and the next patch will introduce support for x86.
Note that depending on loop complexity, time spent in the loop can be
more than the current limit (250 ms), but imposing an upper bound on
program runtime is an orthogonal problem which will be addressed when
program cancellations are supported.
The current time afforded by cond_break may not be enough for cases
where BPF programs want to implement locking algorithms inline, and use
cond_break as a promise to the verifier that they will eventually
terminate.
Below are some benchmarking numbers on the time taken per-iteration for
an empty loop that counts the number of iterations until cond_break
fires. For comparison, we compare it against bpf_for/bpf_repeat which is
another way to achieve the same number of spins (BPF_MAX_LOOPS). The
hardware used for benchmarking was a Sapphire Rapids Intel server with
performance governor enabled, mitigations were enabled.
+-----------------------------+--------------+--------------+------------------+
| Loop type | Iterations | Time (ms) | Time/iter (ns) |
+-----------------------------|--------------+--------------+------------------+
| may_goto | 8388608 | 3 | 0.36 |
| timed_may_goto (count=65535)| 589674932 | 250 | 0.42 |
| bpf_for | 8388608 | 10 | 1.19 |
+-----------------------------+--------------+--------------+------------------+
This gives a good approximation at low overhead while staying close to
the current implementation.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250304003239.2390751-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test gen_prologue and gen_epilogue that generate kfuncs that have not
been seen in the main program.
The main bpf program and return value checks are identical to
pro_epilogue.c introduced in commit 47e69431b57a ("selftests/bpf: Test
gen_prologue and gen_epilogue"). However, now when bpf_testmod_st_ops
detects a program name with prefix "test_kfunc_", it generates slightly
different prologue and epilogue: They still add 1000 to args->a in
prologue, add 10000 to args->a and set r0 to 2 * args->a in epilogue,
but involve kfuncs.
At high level, the alternative version of prologue and epilogue look
like this:
cgrp = bpf_cgroup_from_id(0);
if (cgrp)
bpf_cgroup_release(cgrp);
else
/* Perform what original bpf_testmod_st_ops prologue or
* epilogue does
*/
Since 0 is never a valid cgroup id, the original prologue or epilogue
logic will be performed. As a result, the __retval check should expect
the exact same return value.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250225233545.285481-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The subsequent patch will implement BPF TX timestamping. It will
call the sockops BPF program without holding the sock lock.
This breaks the current assumption that all sock ops programs will
hold the sock lock. The sock's fields of the uapi's bpf_sock_ops
requires this assumption.
To address this, a new "u8 is_locked_tcp_sock;" field is added. This
patch sets it in the current sock_ops callbacks. The "is_fullsock"
test is then replaced by the "is_locked_tcp_sock" test during
sock_ops_convert_ctx_access().
The new TX timestamping callbacks added in the subsequent patch will
not have this set. This will prevent unsafe access from the new
timestamping callbacks.
Potentially, we could allow read-only access. However, this would
require identifying which callback is read-safe-only and also requires
additional BPF instruction rewrites in the covert_ctx. Since the BPF
program can always read everything from a socket (e.g., by using
bpf_core_cast), this patch keeps it simple and disables all read
and write access to any socket fields through the bpf_sock_ops
UAPI from the new TX timestamping callback.
Moreover, note that some of the fields in bpf_sock_ops are specific
to tcp_sock, and sock_ops currently only supports tcp_sock. In
the future, UDP timestamping will be added, which will also break
this assumption. The same idea used in this patch will be reused.
Considering that the current sock_ops only supports tcp_sock, the
variable is named is_locked_"tcp"_sock.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250220072940.99994-4-kerneljasonxing@gmail.com
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/renesas/rswitch.h
32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure")
922b4b955a03 ("net: renesas: rswitch: rework ts tags management")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use BPF helper number instead of function pointer in
bpf_helper_changes_pkt_data(). This would simplify usage of this
function in verifier.c:check_cfg() (in a follow-up patch),
where only helper number is easily available and there is no real need
to lookup helper proto.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In lots of places, bpf_prog pointer is used only for tracing or other
stuff that doesn't modify the structure itself. Same for net_device.
Address at least some of them and add `const` attributes there. The
object code didn't change, but that may prevent unwanted data
modifications and also allow more helpers to have const arguments.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Private stack will be allocated with percpu allocator in jit time.
To avoid complexity at runtime, only one copy of private stack is
available per cpu per prog. So runtime recursion check is necessary
to avoid stack corruption.
Current private stack only supports kprobe/perf_event/tp/raw_tp
which has recursion check in the kernel, and prog types that use
bpf trampoline recursion check. For trampoline related prog types,
currently only tracing progs have recursion checking.
To avoid complexity, all async_cb subprogs use normal kernel stack
including those subprogs used by both main prog subtree and async_cb
subtree. Any prog having tail call also uses kernel stack.
To avoid jit penalty with private stack support, a subprog stack
size threshold is set such that only if the stack size is no less
than the threshold, private stack is supported. The current threshold
is 64 bytes. This avoids jit penality if the stack usage is small.
A useless 'continue' is also removed from a loop in func
check_max_stack_depth().
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163907.2223839-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with
corresponding support in LLVM.
It is similar to existing 'no_caller_saved_registers' attribute in
GCC/LLVM with a provision for backward compatibility. It allows
compilers generate more efficient BPF code assuming the verifier or
JITs will inline or partially inline a helper/kfunc with such
attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast,
bpf_get_smp_processor_id are the first set of such helpers.
- Harden and extend ELF build ID parsing logic.
When called from sleepable context the relevants parts of ELF file
will be read to find and fetch .note.gnu.build-id information. Also
harden the logic to avoid TOCTOU, overflow, out-of-bounds problems.
- Improvements and fixes for sched-ext:
- Allow passing BPF iterators as kfunc arguments
- Make the pointer returned from iter_next method trusted
- Fix x86 JIT convergence issue due to growing/shrinking conditional
jumps in variable length encoding
- BPF_LSM related:
- Introduce few VFS kfuncs and consolidate them in
fs/bpf_fs_kfuncs.c
- Enforce correct range of return values from certain LSM hooks
- Disallow attaching to other LSM hooks
- Prerequisite work for upcoming Qdisc in BPF:
- Allow kptrs in program provided structs
- Support for gen_epilogue in verifier_ops
- Important fixes:
- Fix uprobe multi pid filter check
- Fix bpf_strtol and bpf_strtoul helpers
- Track equal scalars history on per-instruction level
- Fix tailcall hierarchy on x86 and arm64
- Fix signed division overflow to prevent INT_MIN/-1 trap on x86
- Fix get kernel stack in BPF progs attached to tracepoint:syscall
- Selftests:
- Add uprobe bench/stress tool
- Generate file dependencies to drastically improve re-build time
- Match JIT-ed and BPF asm with __xlated/__jited keywords
- Convert older tests to test_progs framework
- Add support for RISC-V
- Few fixes when BPF programs are compiled with GCC-BPF backend
(support for GCC-BPF in BPF CI is ongoing in parallel)
- Add traffic monitor
- Enable cross compile and musl libc
* tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits)
btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version
btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug
btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh
bpf: Call the missed kfree() when there is no special field in btf
bpf: Call the missed btf_record_free() when map creation fails
selftests/bpf: Add a test case to write mtu result into .rodata
selftests/bpf: Add a test case to write strtol result into .rodata
selftests/bpf: Rename ARG_PTR_TO_LONG test description
selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
bpf: Fix helper writes to read-only maps
bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers
bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
selftests/bpf: Add tests for sdiv/smod overflow cases
bpf: Fix a sdiv overflow issue
libbpf: Add bpf_object__token_fd accessor
docs/bpf: Add missing BPF program types to docs
docs/bpf: Add constant values for linkages
bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
...
|
|
This patch adds a .gen_epilogue to the bpf_verifier_ops. It is similar
to the existing .gen_prologue. Instead of allowing a subsystem
to run code at the beginning of a bpf prog, it allows the subsystem
to run code just before the bpf prog exit.
One of the use case is to allow the upcoming bpf qdisc to ensure that
the skb->dev is the same as the qdisc->dev_queue->dev. The bpf qdisc
struct_ops implementation could either fix it up or drop the skb.
Another use case could be in bpf_tcp_ca.c to enforce snd_cwnd
has sane value (e.g. non zero).
The epilogue can do the useful thing (like checking skb->dev) if it
can access the bpf prog's ctx. Unlike prologue, r1 may not hold the
ctx pointer. This patch saves the r1 in the stack if the .gen_epilogue
has returned some instructions in the "epilogue_buf".
The existing .gen_prologue is done in convert_ctx_accesses().
The new .gen_epilogue is done in the convert_ctx_accesses() also.
When it sees the (BPF_JMP | BPF_EXIT) instruction, it will be patched
with the earlier generated "epilogue_buf". The epilogue patching is
only done for the main prog.
Only one epilogue will be patched to the main program. When the
bpf prog has multiple BPF_EXIT instructions, a BPF_JA is used
to goto the earlier patched epilogue. Majority of the archs
support (BPF_JMP32 | BPF_JA): x86, arm, s390, risv64, loongarch,
powerpc and arc. This patch keeps it simple and always
use (BPF_JMP32 | BPF_JA). A new macro BPF_JMP32_A is added to
generate the (BPF_JMP32 | BPF_JA) insn.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Following helpers do not touch their struct net argument:
- bpf_sk_lookup_run_v6()
- __inet6_lookup_established()
- inet6_lookup_reuseport()
- inet6_lookup_listener()
- inet6_lookup_run_sk_lookup()
- __inet6_lookup()
- inet6_lookup()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following helpers do not touch their struct net argument:
- bpf_sk_lookup_run_v4()
- inet_lookup_reuseport()
- inet_lhash2_lookup()
- inet_lookup_run_sk_lookup()
- __inet_lookup_listener()
- __inet_lookup_established()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/aquantia/aquantia.h
219343755eae ("net: phy: aquantia: add missing include guards")
61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
drivers/net/ethernet/wangxun/libwx/wx_hw.c
bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx")
b501d261a5b3 ("net: txgbe: add FDIR ATR support")
https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/
include/linux/mlx5/mlx5_ifc.h
048a403648fc ("net/mlx5: IFC updates for changing max EQs")
99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/
Adjacent changes:
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference")
3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard")
include/net/mac80211.h
816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP")
5a009b42e041 ("wifi: mac80211: track changes in AP's TPE")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Every NIC driver utilizing XDP should invoke xdp_do_flush() after
processing all packages. With the introduction of the bpf_net_context
logic the flush lists (for dev, CPU-map and xsk) are lazy initialized
only if used. However xdp_do_flush() tries to flush all three of them so
all three lists are always initialized and the likely empty lists are
"iterated".
Without the usage of XDP but with CONFIG_DEBUG_NET the lists are also
initialized due to xdp_do_check_flushed().
Jakub suggest to utilize the hints in bpf_net_context and avoid invoking
the flush function. This will also avoiding initializing the lists which
are otherwise unused.
Introduce bpf_net_ctx_get_all_used_flush_lists() to return the
individual list if not-empty. Use the logic in xdp_do_flush() and
xdp_do_check_flushed(). Remove the not needed .*_check_flush().
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Building with W=1 in some configurations produces a false positive
warning for kallsyms:
kernel/kallsyms.c: In function '__sprint_symbol.isra':
kernel/kallsyms.c:503:17: error: 'strcpy' source argument is the same as destination [-Werror=restrict]
503 | strcpy(buffer, name);
| ^~~~~~~~~~~~~~~~~~~~
This originally showed up while building with -O3, but later started
happening in other configurations as well, depending on inlining
decisions. The underlying issue is that the local 'name' variable is
always initialized to the be the same as 'buffer' in the called functions
that fill the buffer, which gcc notices while inlining, though it could
see that the address check always skips the copy.
The calling conventions here are rather unusual, as all of the internal
lookup functions (bpf_address_lookup, ftrace_mod_address_lookup,
ftrace_func_address_lookup, module_address_lookup and
kallsyms_lookup_buildid) already use the provided buffer and either return
the address of that buffer to indicate success, or NULL for failure,
but the callers are written to also expect an arbitrary other buffer
to be returned.
Rework the calling conventions to return the length of the filled buffer
instead of its address, which is simpler and easier to follow as well
as avoiding the warning. Leave only the kallsyms_lookup() calling conventions
unchanged, since that is called from 16 different functions and
adapting this would be a much bigger change.
Link: https://lore.kernel.org/lkml/20200107214042.855757-1-arnd@arndb.de/
Link: https://lore.kernel.org/lkml/20240326130647.7bfb1d92@gandalf.local.home/
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The per-CPU flush lists, which are accessed from within the NAPI callback
(xdp_do_flush() for instance), are per-CPU. There are subject to the
same problem as struct bpf_redirect_info.
Add the per-CPU lists cpu_map_flush_list, dev_map_flush_list and
xskmap_map_flush_list to struct bpf_net_context. Add wrappers for the
access. The lists initialized on first usage (similar to
bpf_net_ctx_get_ri()).
Cc: "Björn Töpel" <bjorn@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-16-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The XDP redirect process is two staged:
- bpf_prog_run_xdp() is invoked to run a eBPF program which inspects the
packet and makes decisions. While doing that, the per-CPU variable
bpf_redirect_info is used.
- Afterwards xdp_do_redirect() is invoked and accesses bpf_redirect_info
and it may also access other per-CPU variables like xskmap_flush_list.
At the very end of the NAPI callback, xdp_do_flush() is invoked which
does not access bpf_redirect_info but will touch the individual per-CPU
lists.
The per-CPU variables are only used in the NAPI callback hence disabling
bottom halves is the only protection mechanism. Users from preemptible
context (like cpu_map_kthread_run()) explicitly disable bottom halves
for protections reasons.
Without locking in local_bh_disable() on PREEMPT_RT this data structure
requires explicit locking.
PREEMPT_RT has forced-threaded interrupts enabled and every
NAPI-callback runs in a thread. If each thread has its own data
structure then locking can be avoided.
Create a struct bpf_net_context which contains struct bpf_redirect_info.
Define the variable on stack, use bpf_net_ctx_set() to save a pointer to
it, bpf_net_ctx_clear() removes it again.
The bpf_net_ctx_set() may nest. For instance a function can be used from
within NET_RX_SOFTIRQ/ net_rx_action which uses bpf_net_ctx_set() and
NET_TX_SOFTIRQ which does not. Therefore only the first invocations
updates the pointer.
Use bpf_net_ctx_get_ri() as a wrapper to retrieve the current struct
bpf_redirect_info. The returned data structure is zero initialized to
ensure nothing is leaked from stack. This is done on first usage of the
struct. bpf_net_ctx_set() sets bpf_redirect_info::kern_flags to 0 to
note that initialisation is required. First invocation of
bpf_net_ctx_get_ri() will memset() the data structure and update
bpf_redirect_info::kern_flags.
bpf_redirect_info::nh is excluded from memset because it is only used
once BPF_F_NEIGH is set which also sets the nh member. The kern_flags is
moved past nh to exclude it from memset.
The pointer to bpf_net_context is saved task's task_struct. Using
always the bpf_net_context approach has the advantage that there is
almost zero differences between PREEMPT_RT and non-PREEMPT_RT builds.
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-15-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes a compiler warning. the bpf_jit_binary_pack_finalize function
was taking an extra bpf_prog parameter that went unused.
This removves it and updates the callers accordingly.
Signed-off-by: Rafael Passos <rafael@rcpassos.me>
Link: https://lore.kernel.org/r/20240615022641.210320-2-rafael@rcpassos.me
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The sysctl core is preparing to only expose instances of struct ctl_table
as "const". This will also affect the ctl_table argument of sysctl handlers,
for which bpf_sysctl_kern::table is also used.
As the function prototype of all sysctl handlers throughout the tree
needs to stay consistent that change will be done in one commit.
To reduce the size of that final commit, switch this utility type which
is not bound by "typedef proc_handler" to "const struct ctl_table".
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Link: https://lore.kernel.org/bpf/20240518-sysctl-const-handler-bpf-v1-1-f0d7186743c1@weissschuh.net
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-13
We've added 119 non-merge commits during the last 14 day(s) which contain
a total of 134 files changed, 9462 insertions(+), 4742 deletions(-).
The main changes are:
1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi.
2) Add BPF range computation improvements to the verifier in particular
around XOR and OR operators, refactoring of checks for range computation
and relaxing MUL range computation so that src_reg can also be an unknown
scalar, from Cupertino Miranda.
3) Add support to attach kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. Session mode is a common use-case for tetragon and bpftrace,
from Jiri Olsa.
4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf
as well as BPF selftest's struct_ops handling, from Andrii Nakryiko.
5) Improvements to BPF selftests in context of BPF gcc backend,
from Jose E. Marchesi & David Faust.
6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test-
-style in order to retire the old test, run it in BPF CI and additionally
expand test coverage, from Jordan Rife.
7) Big batch for BPF selftest refactoring in order to remove duplicate code
around common network helpers, from Geliang Tang.
8) Another batch of improvements to BPF selftests to retire obsolete
bpf_tcp_helpers.h as everything is available vmlinux.h,
from Martin KaFai Lau.
9) Fix BPF map tear-down to not walk the map twice on free when both timer
and wq is used, from Benjamin Tissoires.
10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL,
from Alexei Starovoitov.
11) Change BTF build scripts to using --btf_features for pahole v1.26+,
from Alan Maguire.
12) Small improvements to BPF reusing struct_size() and krealloc_array(),
from Andy Shevchenko.
13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions,
from Ilya Leoshkevich.
14) Extend TCP ->cong_control() callback in order to feed in ack and
flag parameters and allow write-access to tp->snd_cwnd_stamp
from BPF program, from Miao Xu.
15) Add support for internal-only per-CPU instructions to inline
bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs,
from Puranjay Mohan.
16) Follow-up to remove the redundant ethtool.h from tooling infrastructure,
from Tushar Vyavahare.
17) Extend libbpf to support "module:<function>" syntax for tracing
programs, from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
bpf: make list_for_each_entry portable
bpf: ignore expected GCC warning in test_global_func10.c
bpf: disable strict aliasing in test_global_func9.c
selftests/bpf: Free strdup memory in xdp_hw_metadata
selftests/bpf: Fix a few tests for GCC related warnings.
bpf: avoid gcc overflow warning in test_xdp_vlan.c
tools: remove redundant ethtool.h from tooling infra
selftests/bpf: Expand ATTACH_REJECT tests
selftests/bpf: Expand getsockname and getpeername tests
sefltests/bpf: Expand sockaddr hook deny tests
selftests/bpf: Expand sockaddr program return value tests
selftests/bpf: Retire test_sock_addr.(c|sh)
selftests/bpf: Remove redundant sendmsg test cases
selftests/bpf: Migrate ATTACH_REJECT test cases
selftests/bpf: Migrate expected_attach_type tests
selftests/bpf: Migrate wildcard destination rewrite test
selftests/bpf: Migrate sendmsg6 v4 mapped address tests
selftests/bpf: Migrate sendmsg deny test cases
selftests/bpf: Migrate WILDCARD_IP test
selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases
...
====================
Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Inline the calls to bpf_get_smp_processor_id() in the riscv bpf jit.
RISCV saves the pointer to the CPU's task_struct in the TP (thread
pointer) register. This makes it trivial to get the CPU's processor id.
As thread_info is the first member of task_struct, we can read the
processor id from TP + offsetof(struct thread_info, cpu).
RISCV64 JIT output for `call bpf_get_smp_processor_id`
======================================================
Before After
-------- -------
auipc t1,0x848c ld a5,32(tp)
jalr 604(t1)
mv a5,a0
Benchmark using [1] on Qemu.
./benchs/run_bench_trigger.sh glob-arr-inc arr-inc hash-inc
+---------------+------------------+------------------+--------------+
| Name | Before | After | % change |
|---------------+------------------+------------------+--------------|
| glob-arr-inc | 1.077 ± 0.006M/s | 1.336 ± 0.010M/s | + 24.04% |
| arr-inc | 1.078 ± 0.002M/s | 1.332 ± 0.015M/s | + 23.56% |
| hash-inc | 0.494 ± 0.004M/s | 0.653 ± 0.001M/s | + 32.18% |
+---------------+------------------+------------------+--------------+
NOTE: This benchmark includes changes from this patch and the previous
patch that implemented the per-cpu insn.
[1] https://github.com/anakryiko/linux/commit/8dec900975ef
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20240502151854.9810-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a0c ("bpf: verifier: prevent userspace memory access")
d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With BPF_PROBE_MEM, BPF allows de-referencing an untrusted pointer. To
thwart invalid memory accesses, the JITs add an exception table entry
for all such accesses. But in case the src_reg + offset is a userspace
address, the BPF program might read that memory if the user has
mapped it.
Make the verifier add guard instructions around such memory accesses and
skip the load if the address falls into the userspace region.
The JITs need to implement bpf_arch_uaddress_limit() to define where
the userspace addresses end for that architecture or TASK_SIZE is taken
as default.
The implementation is as follows:
REG_AX = SRC_REG
if(offset)
REG_AX += offset;
REG_AX >>= 32;
if (REG_AX <= (uaddress_limit >> 32))
DST_REG = 0;
else
DST_REG = *(size *)(SRC_REG + offset);
Comparing just the upper 32 bits of the load address with the upper
32 bits of uaddress_limit implies that the values are being aligned down
to a 4GB boundary before comparison.
The above means that all loads with address <= uaddress_limit + 4GB are
skipped. This is acceptable because there is a large hole (much larger
than 4GB) between userspace and kernel space memory, therefore a
correctly functioning BPF program should not access this 4GB memory
above the userspace.
Let's analyze what this patch does to the following fentry program
dereferencing an untrusted pointer:
SEC("fentry/tcp_v4_connect")
int BPF_PROG(fentry_tcp_v4_connect, struct sock *sk)
{
*(volatile long *)sk;
return 0;
}
BPF Program before | BPF Program after
------------------ | -----------------
0: (79) r1 = *(u64 *)(r1 +0) 0: (79) r1 = *(u64 *)(r1 +0)
-----------------------------------------------------------------------
1: (79) r1 = *(u64 *)(r1 +0) --\ 1: (bf) r11 = r1
----------------------------\ \ 2: (77) r11 >>= 32
2: (b7) r0 = 0 \ \ 3: (b5) if r11 <= 0x8000 goto pc+2
3: (95) exit \ \-> 4: (79) r1 = *(u64 *)(r1 +0)
\ 5: (05) goto pc+1
\ 6: (b7) r1 = 0
\--------------------------------------
7: (b7) r0 = 0
8: (95) exit
As you can see from above, in the best case (off=0), 5 extra instructions
are emitted.
Now, we analyze the same program after it has gone through the JITs of
ARM64 and RISC-V architectures. We follow the single load instruction
that has the untrusted pointer and see what instrumentation has been
added around it.
x86-64 JIT
==========
JIT's Instrumentation
(upstream)
---------------------
0: nopl 0x0(%rax,%rax,1)
5: xchg %ax,%ax
7: push %rbp
8: mov %rsp,%rbp
b: mov 0x0(%rdi),%rdi
---------------------------------
f: movabs $0x800000000000,%r11
19: cmp %r11,%rdi
1c: jb 0x000000000000002a
1e: mov %rdi,%r11
21: add $0x0,%r11
28: jae 0x000000000000002e
2a: xor %edi,%edi
2c: jmp 0x0000000000000032
2e: mov 0x0(%rdi),%rdi
---------------------------------
32: xor %eax,%eax
34: leave
35: ret
The x86-64 JIT already emits some instructions to protect against user
memory access. This patch doesn't make any changes for the x86-64 JIT.
ARM64 JIT
=========
No Intrumentation Verifier's Instrumentation
(upstream) (This patch)
----------------- --------------------------
0: add x9, x30, #0x0 0: add x9, x30, #0x0
4: nop 4: nop
8: paciasp 8: paciasp
c: stp x29, x30, [sp, #-16]! c: stp x29, x30, [sp, #-16]!
10: mov x29, sp 10: mov x29, sp
14: stp x19, x20, [sp, #-16]! 14: stp x19, x20, [sp, #-16]!
18: stp x21, x22, [sp, #-16]! 18: stp x21, x22, [sp, #-16]!
1c: stp x25, x26, [sp, #-16]! 1c: stp x25, x26, [sp, #-16]!
20: stp x27, x28, [sp, #-16]! 20: stp x27, x28, [sp, #-16]!
24: mov x25, sp 24: mov x25, sp
28: mov x26, #0x0 28: mov x26, #0x0
2c: sub x27, x25, #0x0 2c: sub x27, x25, #0x0
30: sub sp, sp, #0x0 30: sub sp, sp, #0x0
34: ldr x0, [x0] 34: ldr x0, [x0]
--------------------------------------------------------------------------------
38: ldr x0, [x0] ----------\ 38: add x9, x0, #0x0
-----------------------------------\\ 3c: lsr x9, x9, #32
3c: mov x7, #0x0 \\ 40: cmp x9, #0x10, lsl #12
40: mov sp, sp \\ 44: b.ls 0x0000000000000050
44: ldp x27, x28, [sp], #16 \\--> 48: ldr x0, [x0]
48: ldp x25, x26, [sp], #16 \ 4c: b 0x0000000000000054
4c: ldp x21, x22, [sp], #16 \ 50: mov x0, #0x0
50: ldp x19, x20, [sp], #16 \---------------------------------------
54: ldp x29, x30, [sp], #16 54: mov x7, #0x0
58: add x0, x7, #0x0 58: mov sp, sp
5c: autiasp 5c: ldp x27, x28, [sp], #16
60: ret 60: ldp x25, x26, [sp], #16
64: nop 64: ldp x21, x22, [sp], #16
68: ldr x10, 0x0000000000000070 68: ldp x19, x20, [sp], #16
6c: br x10 6c: ldp x29, x30, [sp], #16
70: add x0, x7, #0x0
74: autiasp
78: ret
7c: nop
80: ldr x10, 0x0000000000000088
84: br x10
There are 6 extra instructions added in ARM64 in the best case. This will
become 7 in the worst case (off != 0).
RISC-V JIT (RISCV_ISA_C Disabled)
==========
No Intrumentation Verifier's Instrumentation
(upstream) (This patch)
----------------- --------------------------
0: nop 0: nop
4: nop 4: nop
8: li a6, 33 8: li a6, 33
c: addi sp, sp, -16 c: addi sp, sp, -16
10: sd s0, 8(sp) 10: sd s0, 8(sp)
14: addi s0, sp, 16 14: addi s0, sp, 16
18: ld a0, 0(a0) 18: ld a0, 0(a0)
---------------------------------------------------------------
1c: ld a0, 0(a0) --\ 1c: mv t0, a0
--------------------------\ \ 20: srli t0, t0, 32
20: li a5, 0 \ \ 24: lui t1, 4096
24: ld s0, 8(sp) \ \ 28: sext.w t1, t1
28: addi sp, sp, 16 \ \ 2c: bgeu t1, t0, 12
2c: sext.w a0, a5 \ \--> 30: ld a0, 0(a0)
30: ret \ 34: j 8
\ 38: li a0, 0
\------------------------------
3c: li a5, 0
40: ld s0, 8(sp)
44: addi sp, sp, 16
48: sext.w a0, a5
4c: ret
There are 7 extra instructions added in RISC-V.
Fixes: 800834285361 ("bpf, arm64: Add BPF exception tables")
Reported-by: Breno Leitao <leitao@debian.org>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240424100210.11982-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Support atomics in bpf_arena that can be JITed as a single x86 instruction.
Instructions that are JITed as loops are not supported at the moment,
since they require more complex extable and loop logic.
JITs can choose to do smarter things with bpf_jit_supports_insn().
Like arm64 may decide to support all bpf atomics instructions
when emit_lse_atomic is available and none in ll_sc mode.
bpf_jit_supports_percpu_insn(), bpf_jit_supports_ptr_xchg() and
other such callbacks can be replaced with bpf_jit_supports_insn()
in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240405231134.17274-1-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a new BPF instruction for resolving absolute addresses of per-CPU
data from their per-CPU offsets. This instruction is internal-only and
users are not allowed to use them directly. They will only be used for
internal inlining optimizations for now between BPF verifier and BPF JITs.
We use a special BPF_MOV | BPF_ALU64 | BPF_X form with insn->off field
set to BPF_ADDR_PERCPU = -1. I used negative offset value to distinguish
them from positive ones used by user-exposed instructions.
Such instruction performs a resolution of a per-CPU offset stored in
a register to a valid kernel address which can be dereferenced. It is
useful in any use case where absolute address of a per-CPU data has to
be resolved (e.g., in inlining bpf_map_lookup_elem()).
BPF disassembler is also taught to recognize them to support dumping
final BPF assembly code (non-JIT'ed version).
Add arch-specific way for BPF JITs to mark support for this instructions.
This patch also adds support for these instructions in x86-64 BPF JIT.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240402021307.1012571-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch improves the run-time calculation for program stats by
capturing the duration as soon as possible after the program returns.
Previously, the duration included u64_stats_t operations. While the
instrumentation overhead is part of the total time spent when stats are
enabled, distinguishing between the program's native execution time and
the time spent due to instrumentation is crucial for accurate
performance analysis.
By making this change, the patch facilitates more precise optimization
of BPF programs, enabling users to understand their performance in
environments without stats enabled.
I used a virtualized environment to measure the run-time over one minute
for a basic raw_tracepoint/sys_enter program, which just increments a
local counter. Although the virtualization introduced some performance
degradation that could affect the results, I observed approximately a
16% decrease in average run-time reported by stats with this change
(310 -> 260 nsec).
Signed-off-by: Jose Fernandez <josef@netflix.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240402034010.25060-1-josef@netflix.com
|
|
Implement a helper function to check if an instruction is
addr_space_cast from as(0) to as(1). Use this helper in the x86 JIT.
Other JITs can use this helper when they add support for this instruction.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240324183226.29674-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_jit_binary_lock_ro()
set_memory_rox() can fail, leaving memory unprotected.
Check return and bail out when bpf_jit_binary_lock_ro() returns
an error.
Link: https://github.com/KSPP/linux/issues/7
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linux-hardening@vger.kernel.org <linux-hardening@vger.kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> # s390x
Acked-by: Tiezhu Yang <yangtiezhu@loongson.cn> # LoongArch
Reviewed-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> # MIPS Part
Message-ID: <036b6393f23a2032ce75a1c92220b2afcb798d5d.1709850515.git.christophe.leroy@csgroup.eu>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
set_memory_ro() can fail, leaving memory unprotected.
Check its return and take it into account as an error.
Link: https://github.com/KSPP/linux/issues/7
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linux-hardening@vger.kernel.org <linux-hardening@vger.kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-ID: <286def78955e04382b227cb3e4b6ba272a7442e3.1709850515.git.christophe.leroy@csgroup.eu>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))).
The addr_space=1 is reserved as bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY
rY = addr_space_cast(rX, 1, 0) has to be converted by JIT:
aux_reg = upper_32_bits of arena->user_vm_start
aux_reg <<= 32
wX = wY // clear upper 32 bits of dst register
if (wX) // if not zero add upper bits of user_vm_start
wX |= aux_reg
JIT can do it more efficiently:
mov dst_reg32, src_reg32 // 32-bit move
shl dst_reg, 32
or dst_reg, user_vm_start
rol dst_reg, 32
xor r11, r11
test dst_reg32, dst_reg32 // check if lower 32-bit are zero
cmove r11, dst_reg // if so, set dst_reg to zero
// Intel swapped src/dst register encoding in CMOVcc
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-5-alexei.starovoitov@gmail.com
|
|
Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW] instructions.
They are similar to PROBE_MEM instructions with the following differences:
- PROBE_MEM has to check that the address is in the kernel range with
src_reg + insn->off >= TASK_SIZE_MAX + PAGE_SIZE check
- PROBE_MEM doesn't support store
- PROBE_MEM32 relies on the verifier to clear upper 32-bit in the register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in %r12 in the prologue)
Due to bpf_arena constructions such %r12 + %reg + off16 access is guaranteed
to be within arena virtual range, so no address check at run-time.
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop.
When LDX faults the destination register is zeroed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-4-alexei.starovoitov@gmail.com
|
