summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
9 daysdrm/amd/display: Bound VBIOS record-chain walk loopsHarry Wentland
[Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Assisted-by: Copilot:claude-opus-4.6 Mythos Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93) Cc: stable@vger.kernel.org
9 daysdrm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer sizeHarry Wentland
[Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. Fixes: eff682f83c9c ("drm/amd/display: Add DDC handles for HDCP2.2") Assisted-by: Copilot:claude-opus-4.6 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) Cc: stable@vger.kernel.org
9 daysdrm/amd/display: Reject gpio_bitshift >= 32 in bios_parser_get_gpio_pin_info()Harry Wentland
[Why & How] gpio_bitshift is a uint8_t read directly from the VBIOS GPIO pin table. If the value is >= 32, the expression "1 << gpio_bitshift" triggers undefined behaviour in C (shift count exceeds type width). On x86 the shift is silently masked to 5 bits, producing an incorrect GPIO mask that may cause wrong MMIO register bits to be toggled. Validate gpio_bitshift before use and return BP_RESULT_BADBIOSTABLE for out-of-range values. Fixes: ae79c310b1a6 ("drm/amd/display: Add DCE12 bios parser support") Assisted-by: Copilot:claude-opus-4.6 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit eadf438ab8d370b9d19acee9359918c85afeb80d) Cc: stable@vger.kernel.org
9 daysdrm/amd/display: Use krealloc_array() in dal_vector_reserve()Harry Wentland
[Why & How] dal_vector_reserve() computes the allocation size as "capacity * vector->struct_size" using uint32_t arithmetic, which can silently wrap to a small value on overflow. This would cause krealloc to return a smaller buffer than expected, leading to heap overflows on subsequent vector appends. Replace krealloc() with krealloc_array() which performs an internal overflow check and returns NULL on wrap, preventing the issue. Fixes: 2004f45ef83f ("drm/amd/display: Use kernel alloc/free") Assisted-by: Copilot:claude-opus-4.6 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) Cc: stable@vger.kernel.org
9 daysdrm/amd/display: Fix NULL deref and buffer over-read in SDP debugfsHarry Wentland
[Why & How] dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc without checking for NULL. A connector can be connected but not bound to any CRTC (e.g. after hot-plug before the next atomic commit), causing a kernel crash when writing to the sdp_message debugfs node. The function also ignores the user-provided size argument and always passes 36 bytes to copy_from_user(), reading past the user buffer when size < 36. Fix both issues by: - Returning -ENODEV when connector->base.state or state->crtc is NULL - Clamping write_size to min(size, sizeof(data)) Fixes: c7ba3653e977 ("drm/amd/display: Generic SDP message access in amdgpu") Assisted-by: Copilot:claude-opus-4.6 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300) Cc: stable@vger.kernel.org
9 daysdrm/amd/display: Clamp VBIOS HDMI retimer register count to array sizeHarry Wentland
[Why & How] The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9] and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated before use, so a malformed VBIOS can specify values up to 255, causing an out-of-bounds heap write during driver probe. Clamp each register count to the destination array size using min_t() before the copy loops, in both get_integrated_info_v11() and get_integrated_info_v2_1(). Assisted-by: GitHub Copilot:claude-opus-4.6 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69) Cc: stable@vger.kernel.org
9 daysdrm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval()Harry Wentland
[Why & How] The aux_rd_interval array in struct dc_lttpr_caps is declared with MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset parameter passed to dp_get_eq_aux_rd_interval() can be as large as MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD. This leads to an out-of-bounds read of aux_rd_interval[7] when offset is 8. Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to accommodate the full range of valid repeater counts defined by the DP spec. Assisted-by: GitHub Copilot:Claude claude-4-opus Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04) Cc: stable@vger.kernel.org
9 daysdrm/amd/display: add missing CSC entries for BT.2020 for DCE IPsLeorize
DCE-based hardware does not have the CSC matrices for BT.2020, which causes the driver to fallback to the GPU built-in matrices. This does not appear to cause any issues for RGB sinks, but causes major color artifacts for YCbCr ones (e.g. black becomes green). This commit adds the missing CSC matrices (taken from DC common) to DCE CSC tables, resolving the issue. Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/3358 Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5333 Assisted-by: oh-my-pi:GPT-5.5 Signed-off-by: Leorize <leorize+oss@disroot.org> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 51e6668ab4baf55b082c376318d51ef965757196) Cc: stable@vger.kernel.org
2026-05-27drm/amd/display: Write REFCLK to 48MHz on DCN21Ivan Lipski
[Why&How] dccg21_init() calls dccg2_init() which hardcodes 100MHz refclk values for MICROSECOND_TIME_BASE_DIV and MILLISECOND_TIME_BASE_DIV. DCN21 uses 48MHz refclk, so the wrong values corrupt DCCG timing and cause eDP link training failure on cold boot. Write the correct 48MHz values directly instead of calling dccg2_init(). v2: Fixed typo Fixes: e6e2b956fc81 ("drm/amd/display: Add missing DCCG register entries for DCN20-DCN316") Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5272 Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5311 Reported-by: Max Chernoff <git@maxchernoff.ca> Tested-by: Max Chernoff <git@maxchernoff.ca> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 08236c3ef284cd2d110e5e3d51fc9615e551f9dc) Cc: stable@vger.kernel.org
2026-05-19drm/amd/display: Validate payload length and link_index in ↵Harry Wentland
dc_process_dmub_aux_transfer_async [Why&How] dc_process_dmub_aux_transfer_async() copies payload->length bytes into a 16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which is a no-op in release builds. If a caller ever passes length > 16 this results in a stack buffer overflow via memcpy. Additionally, link_index is used to dereference dc->links[] without bounds checking against dc->link_count, risking an out-of-bounds access. Replace the ASSERT with a hard runtime check that returns false when payload->length exceeds the destination buffer size, and add a bounds check for link_index before it is used. Assisted-by: GitHub Copilot:Claude claude-4-opus Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) Cc: stable@vger.kernel.org
2026-05-19drm/amd/display: Validate GPIO pin LUT table size before iteratingHarry Wentland
[Why&How] The GPIO pin table parsers in get_gpio_i2c_info() and bios_parser_get_gpio_pin_info() derive an element count from the VBIOS table_header.structuresize field, then iterate over gpio_pin[] entries. However, GET_IMAGE() only validates that the table header itself fits within the BIOS image. If the VBIOS reports a structuresize larger than the actual mapped data, the loop reads past the end of the BIOS image, causing an out-of-bounds read. Fix this by calling bios_get_image() to validate that the full claimed structuresize is accessible within the BIOS image before entering the loop in both functions. Assisted-by: GitHub Copilot:claude-opus-4-6 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3) Cc: stable@vger.kernel.org
2026-05-19drm/amd/display: Fix integer overflow in bios_get_image()Harry Wentland
[Why&How] The bounds check in bios_get_image() computes 'offset + size' using unsigned 32-bit arithmetic before comparing against bios_size. If a VBIOS image contains a near-UINT32_MAX offset the addition wraps to a small value, the comparison passes, and the function returns a wild pointer past the VBIOS mapping. Additionally, the comparison uses '<' (strict), which incorrectly rejects the valid exact-fit case where offset + size == bios_size. Fix both issues by restructuring the check to avoid the addition entirely: first reject if offset alone exceeds bios_size, then check size against the remaining space (bios_size - offset). This eliminates the overflow and correctly permits exact-fit accesses. Assisted-by: GitHub Copilot:claude-opus-4.6 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d40fb392af659c4a02b560319f226842f6ec1a95) Cc: stable@vger.kernel.org
2026-05-11drm/amd/display: Wrap DCN32 phantom-plane allocation in ↵Mikhail Gavrilov
DC_RUN_WITH_PREEMPTION_ENABLED [Why] dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(), which disables local softirqs. The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path, which calls BUG_ON(in_interrupt()) because it's invoked within the FPU-enabled (softirq disabled) region, leading to a kernel crash. [How] Wrap the dc_state_create_phantom_plane() call with the DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during this memory allocation. Fixes: 235c67634230 ("drm/amd/display: add DCN32/321 specific files for Display Core") Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4470 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) Cc: stable@vger.kernel.org
2026-04-29drm/amd/display: Use EDID from VBIOS embedded panel infoTimur Kristóf
When an embedded panel has no DDC, read the EDID from the VBIOS embedded panel info and use that. Fixes: 7c7f5b15be65 ("drm/amd/display: Refactor edid read.") Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192 Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 399b9abc353c62f6e37d38325edbdb6c2c00411c)
2026-04-29drm/amd/display: Read EDID from VBIOS embedded panel infoTimur Kristóf
Some board manufacturers hardcode the EDID for the embedded panel in the VBIOS. This EDID should be used when the panel doesn't have a DDC. For reference, see the legacy non-DC display code: amdgpu_atombios_encoder_get_lcd_info() This is necessary to support embedded connectors without DDC. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192 Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit eb105e63b474c11ef6a84a1c6b18100d851ff364)
2026-04-29drm/amd/display: Allow constructing DCE8 link encoder without DDCTimur Kristóf
When the DDC channel ID is set to CHANNEL_ID_UNKNOWN, pass NULL to the AUX regs array. This is necessary to support embedded connectors without DDC. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192 Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 155baf3038c1af50b602723022ed869b38e86a99)
2026-04-29drm/amd/display: Allow constructing DCE6 link encoder without DDCTimur Kristóf
When the DDC channel ID is set to CHANNEL_ID_UNKNOWN, pass NULL to the AUX regs array. This is necessary to support embedded connectors without DDC. Fixes: 7c15fd86aaec ("drm/amd/display: dc/dce: add initial DCE6 support (v10)") Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192 Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 38a70e50b22a188ff601740d64dd75f46213121f)
2026-04-29drm/amd/display: Allow DCE link encoder without AUX registersTimur Kristóf
Allow constructing the DCE link encoder without DDC, which means the AUX registers array will be NULL. This is necessary to support embedded connectors without DDC. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192 Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 87f30b101af62590faf6020d106da07efdda199b)
2026-04-29drm/amd/display: Allow embedded connectors without DDCTimur Kristóf
On some laptops, the embedded panel may not have a DDC (display data channel) available. On these, the EDID may be hardcoded in ACPI or the VBIOS. In this case, use GPIO_DDC_LINE_UNKNOWN and don't fail. Fixes: def3488eb0fd ("drm/amd/display: refactor HPD to increase flexibility") Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192 Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 75b8a6ca0e8bc3ce24572f854e95f8721b321179)
2026-04-29drm/amd/display: Restore 5s vbl offdelay for NV3x+ DGPUsLeo Li
[Why] Rapid vblank off is causing flip-done timeouts for NV3x and newer family of GPUs that support more idle optimization features. A proper fix requires further investigation. In lieu of it, let's workaround it for now. [How] For NV3x and newer family of DGPUs, restore the old 5s vblank off timer. Fixes: 9b47278cec98 ("drm/amd/display: temp w/a for dGPU to enter idle optimizations") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3787 Link: https://lore.kernel.org/amd-gfx/20260217191632.1243826-1-sysdadmin@m1k.cloud/ Tested-by: Michele Palazzi <sysdadmin@m1k.cloud> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit df482c2d441b090161633566b7a0755f1bbd55c2)
2026-04-28drm/amd/display: properly handle family setting for early GC 11.5.4Alex Deucher
Early variants need an override. Fixes: 57d00816c6a9 ("drm/amdgpu: set family for GC 11.5.4") Cc: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Cc: Roman Li <Roman.Li@amd.com> Cc: Mario Limonciello <superm1@kernel.org> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 922fccc2d3f8186008c19ba08a49ae8a9463cb50)
2026-04-28drm/amd/display: Update MCIF_ADDR macro to address IGT DWB regressionGaghik Khachatrian
[Why] A previous warning-fix commit updated type casts in the DCN3 mmhubbub code but missed updating the MCIF_ADDR macro to the correct, fully parenthesized and casted version. This caused a regression during DWB tests, where address values could be misinterpreted, potentially leading to incorrect hardware programming. [How] Updated the MCIF_ADDR macro in dcn30_mmhubbub.c to use the proper parenthesization and type casting, ensuring correct address handling. Removed redundant casts from REG_UPDATE calls for improved clarity and consistency with current coding standards. Fixes: f4cdbb5d5405 ("drm/amd/display: Fix implicit narrowing conversion warnings") Reviewed-by: Clayton King <clayton.king@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4f251a5e9f2297023b00b7cab606de111931cfa3)
2026-04-24drm/amd/display: Restore analog connector supportRoman Li
[Why] The analog connector support was accidentally removed, causing a crash when connecting an analog monitor. [How] This patch restores the functions and pointers required for proper analog and DP bridge encoder support on legacy GPUs. V2: Restore the external encoder control functions. V3: - Restore BIOS parser external encoder DAC load detection - Restore stream initialization and source selection changes Fixes: e56e3cff2a1b ("drm/amd/display: Sync dcn42 with DC 3.2.373") Cc: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Timur Kristóf <timur.kristof@gmail.com> Tested-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit cea8349e4494d2892ea57eef3fe4a8987464a876)
2026-04-21drm/amd/display: Disable 10-bit truncation and dithering on DCE 6.xTimur Kristóf
DCE 6.x doesn't support 10-bit truncation and 10-bit dithering because the following fields are 1-bit only: FMT_TEMPORAL_DITHER_DEPTH FMT_SPATIAL_DITHER_DEPTH FMT_TRUNCATE_DEPTH Programming these fields to "2" will program them as if the dithering option was 6-bit, resulting in sub-par picture quality and an ugly "color banding" effect. Note that a recent commit changed the default 10-bit dithering option to DITHER_OPTION_SPATIAL10 which improves the picture quality because it happens to look better, but is still not actually supported by DCE 6.x versions. When the color depth is 10-bit or more, just disable any kind of dithering options on DCE 6.x. Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5151 Fixes: 529cad0f945c ("drm/amd/display: Add function to set dither option") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 6be8ced880dfe29ce38c2d5e74489822da5c250e)
2026-04-21drm/amd/display: Undo accidental fix revert in amdgpu_dm_ism.cLeo Li
[Why] Pausing DPM power profiles during static screen caused a bunch of audio/performance/clock issues that were addressed in this fix: 'commit 1412482b7143 ("Revert "drm/amd/display: pause the workload setting in dm"")' This logic in function amdgpu_dm_crtc_vblank_control_worker() was moved to amdgpu_dm_ism.c, but the fix was lost in the process. [How] Reapply the fix to amdgpu_dm_ism.c Fixes: 754003486c3c ("drm/amd/display: Add Idle state manager(ISM)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit bc621e91d6fc004cfae9148c5a91acad19ada3e4)
2026-04-17drm/amd/display: Fix ISM teardown crash from NULL dc dereferenceSrinivasan Shanmugam
The Idle State Manager (ISM) uses delayed work to apply display idle optimizations later, instead of immediately. This helps avoid rapid idle transitions that can hurt power or performance. A crash was seen during driver teardown. The system boots normally and the driver loads successfully. Later, when the GPU is being stopped, the log shows: amdgpu 0000:0e:00.0: finishing device. Workqueue: events_unbound dm_ism_sso_delayed_work_func [amdgpu] After this, delayed ISM work still runs and reaches: dm_ism_sso_delayed_work_func() -> amdgpu_dm_ism_commit_event() -> dm_ism_commit_idle_optimization_state() -> dc_allow_idle_optimizations_internal() The crash report showed: KASAN: null-ptr-deref in range [0x690-0x697] Signature: [22601.113316] KASAN: null-ptr-deref in range [0x0000000000000690-0x0000000000000697] ... [22601.113368] Workqueue: events_unbound dm_ism_sso_delayed_work_func [amdgpu] [22601.113930] RIP: 0010:dc_allow_idle_optimizations_internal+0xa6/0xc40 [amdgpu] ... [22601.114491] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000000690 ... [22601.114561] Call Trace: [22601.114566] <TASK> [22601.114572] ? srso_alias_return_thunk+0x5/0xfbef5 [22601.114582] ? update_load_avg+0x1b6/0x20b0 [22601.114593] ? __pfx_dc_allow_idle_optimizations_internal+0x10/0x10 [amdgpu] [22601.114932] ? psi_group_change+0x4ed/0x8d0 [22601.114942] dm_ism_commit_idle_optimization_state+0x214/0x570 [amdgpu] [22601.115268] amdgpu_dm_ism_commit_event+0xe1d/0x15a0 [amdgpu] [22601.115588] ? srso_alias_return_thunk+0x5/0xfbef5 [22601.115595] ? __kasan_check_write+0x18/0x20 [22601.115603] ? srso_alias_return_thunk+0x5/0xfbef5 [22601.115610] ? mutex_lock+0x83/0xc0 [22601.115620] dm_ism_sso_delayed_work_func+0x64/0x90 [amdgpu] GDB resolved dc_allow_idle_optimizations_internal+0xa6 to: struct dc_state *context = dc->current_state; The matching disassembly showed: mov %rdi, %r12 mov 0x690(%r12), %r13 where r12 holds the dc pointer. A GDB layout dump of struct dc showed: /* 1680 | 8 */ struct dc_state *current_state; Since 1680 decimal is 0x690, this confirms that current_state is at offset 0x690. The faulting access was effectively: dc + 0x690 which indicates that dc was NULL at the time of dereference. This shows that ISM work can still run during teardown after dc has been cleared. ISM is not expected to run after dc is destroyed. Fix this by disabling ISM under dc_lock in amdgpu_dm_fini() before dc_destroy(), ensuring no further ISM work runs after dc teardown. Also add ASSERT(dm->dc) in amdgpu_dm_ism_commit_event() to enforce this invariant, and ASSERT(mutex_is_locked(&dm->dc_lock)) in amdgpu_dm_ism_disable() to clarify the locking requirement. Fixes: 754003486c3c ("drm/amd/display: Add Idle state manager(ISM)") Suggested-by: Leo Li <sunpeng.li@amd.com> Cc: Ray Wu <ray.wu@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Move dml2_destroy to non-FPU compilation unitRafal Ostrowski
On PREEMPT_RT kernels, vfree() can sleep because spin_lock is converted to rt_mutex. dml2_destroy() calls vfree() while inside an FPU-guarded region (preempt_count=2), which is illegal. dml2_wrapper_fpu.c is compiled with CC_FLAGS_FPU which defines _LINUX_FPU_COMPILATION_UNIT, making DC_RUN_WITH_PREEMPTION_ENABLED() resolve to a no-op. This prevents the macro from cycling FPU context off/on around vfree(). Move dml2_destroy() to dml2_wrapper.c (non-FPU compilation unit) where DC_RUN_WITH_PREEMPTION_ENABLED() properly cycles DC_FP_END/ DC_FP_START around vfree(). This pairs it with dml2_allocate_memory() which already lives there. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Fix fpu guard warningWayne Lin
[Why] Due to improper fpu guarding, we encounter this warning during boot up: [ 10.027021] WARNING: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c:58 at dc_assert_fp_enabled+0x12/0x20 [amdgpu], CPU#8: (udev-worker)/469 [ 10.027644] Modules linked in: binfmt_misc snd_ctl_led nls_iso8859_1 intel_rapl_msr amd_atl intel_rapl_common amdgpu(+) snd_acp_legacy_mach snd_acp_mach snd_soc_nau8821 snd_acp3x_pdm_dma snd_acp3x_rn snd_soc_dmic snd_sof_amd_acp63 snd_sof_amd_vangogh snd_sof_amd_rembrandt snd_sof_amd_renoir snd_sof_amd_acp snd_sof_pci snd_hda_codec_alc269 snd_sof_xtensa_dsp snd_hda_scodec_component snd_hda_codec_realtek_lib snd_sof snd_hda_codec_generic snd_sof_utils snd_pci_ps snd_soc_acpi_amd_match snd_amd_sdw_acpi soundwire_amd snd_hda_codec_atihdmi soundwire_generic_allocation snd_hda_codec_hdmi soundwire_bus snd_soc_sdca edac_mce_amd snd_hda_intel snd_soc_core snd_hda_codec kvm_amd snd_compress snd_hda_core ac97_bus ee1004 amdxcp snd_pcm_dmaengine snd_intel_dspcfg snd_intel_sdw_acpi kvm drm_panel_backlight_quirks snd_rpl_pci_acp6x gpu_sched snd_hwdep snd_acp_pci irqbypass snd_amd_acpi_mach drm_buddy snd_acp_legacy_common snd_seq_midi ghash_clmulni_intel drm_ttm_helper aesni_intel snd_seq_midi_event snd_pci_acp6x joydev rapl [ 10.027750] snd_pcm snd_rawmidi ttm snd_seq snd_pci_acp5x drm_exec drm_suballoc_helper snd_seq_device wmi_bmof snd_rn_pci_acp3x drm_display_helper snd_timer snd_acp_config cec snd_soc_acpi snd rc_core i2c_piix4 ccp snd_pci_acp3x i2c_smbus soundcore k10temp i2c_algo_bit spi_amd cdc_mbim input_leds cdc_wdm mac_hid sch_fq_codel msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs autofs4 cdc_ncm cdc_ether usbnet mii hid_logitech_hidpp hid_logitech_dj hid_generic nvme nvme_core ahci serio_raw nvme_keyring usbhid ucsi_acpi amd_xgbe nvme_auth libahci hkdf typec_ucsi video typec wmi i2c_hid_acpi i2c_hid hid [ 10.027853] CPU: 8 UID: 0 PID: 469 Comm: (udev-worker) Not tainted 6.19.0asdn-260408-asdn #1 PREEMPT(voluntary) [ 10.027858] Hardware name: AMD Crater-RN/Crater-RN, BIOS TCR1004A 03/12/2024 [ 10.027861] RIP: 0010:dc_assert_fp_enabled+0x12/0x20 [amdgpu] [ 10.028416] Code: 00 00 00 00 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 65 8b 05 39 79 cc c4 85 c0 7e 07 31 c0 e9 9e 75 2a c3 <0f> 0b 31 c0 e9 95 75 2a c3 0f 1f 44 00 00 90 90 90 90 90 90 90 90 [ 10.028420] RSP: 0018:ffffcca10188b348 EFLAGS: 00010246 [ 10.028425] RAX: 0000000000000000 RBX: ffff88c6077f8000 RCX: 0000000000000000 [ 10.028428] RDX: ffff88c607d0e400 RSI: ffffffffc204d860 RDI: ffff88c624c00000 [ 10.028430] RBP: ffffcca10188b3e8 R08: ffff88c624c35c88 R09: 0000000000000000 [ 10.028433] R10: 0000000000000000 R11: 0000000000000000 R12: ffffcca10188b548 [ 10.028435] R13: ffff88c60be5bd00 R14: ffffffffc204d860 R15: ffff88c624c00000 [ 10.028438] FS: 00007c80c2432980(0000) GS:ffff88cdc7464000(0000) knlGS:0000000000000000 [ 10.028441] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 10.028443] CR2: 00007866ae013da8 CR3: 000000010a511000 CR4: 0000000000350ef0 [ 10.028446] Call Trace: [ 10.028449] <TASK> [ 10.028452] ? dcn21_update_bw_bounding_box+0x38/0xb30 [amdgpu] [ 10.028991] ? srso_return_thunk+0x5/0x5f [ 10.029001] dc_create+0x37c/0x730 [amdgpu] [ 10.029505] ? srso_return_thunk+0x5/0x5f [ 10.029512] amdgpu_dm_init+0x374/0x2ff0 [amdgpu] [ 10.030053] ? srso_return_thunk+0x5/0x5f [ 10.030057] ? __irq_work_queue_local+0x61/0xe0 [ 10.030063] ? srso_return_thunk+0x5/0x5f [ 10.030067] ? irq_work_queue+0x2f/0x70 [ 10.030071] ? srso_return_thunk+0x5/0x5f [ 10.030075] ? __wake_up_klogd+0x75/0xa0 [ 10.030081] ? srso_return_thunk+0x5/0x5f [ 10.030085] ? vprintk_emit+0x35b/0x3f0 [ 10.030102] dm_hw_init+0x1c/0x110 [amdgpu] [ 10.030625] amdgpu_device_init+0x23e8/0x3210 [amdgpu] [ 10.031041] ? pci_read+0x55/0x90 [ 10.031047] ? srso_return_thunk+0x5/0x5f [ 10.031051] ? pci_read_config_word+0x27/0x50 [ 10.031057] ? srso_return_thunk+0x5/0x5f [ 10.031061] ? do_pci_enable_device+0x155/0x180 [ 10.031068] amdgpu_driver_load_kms+0x1a/0xd0 [amdgpu] [ 10.031486] amdgpu_pci_probe+0x28c/0x6f0 [amdgpu] [ 10.031902] local_pci_probe+0x47/0xb0 [ 10.031908] pci_device_probe+0xf3/0x270 [ 10.031914] really_probe+0xf1/0x410 [ 10.031920] __driver_probe_device+0x8c/0x190 [ 10.031924] driver_probe_device+0x24/0xd0 [ 10.031928] __driver_attach+0x10b/0x240 [ 10.031932] ? __pfx___driver_attach+0x10/0x10 [ 10.031936] bus_for_each_dev+0x8c/0xf0 [ 10.031942] driver_attach+0x1e/0x30 [ 10.031947] bus_add_driver+0x160/0x2a0 [ 10.031952] driver_register+0x5e/0x130 [ 10.031957] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu] [ 10.032361] __pci_register_driver+0x5e/0x70 [ 10.032366] amdgpu_init+0x5d/0xff0 [amdgpu] [ 10.032768] ? srso_return_thunk+0x5/0x5f [ 10.032773] do_one_initcall+0x5d/0x340 [ 10.032783] do_init_module+0x97/0x2c0 [ 10.032788] load_module+0x2b49/0x2c30 [ 10.032800] init_module_from_file+0xf4/0x120 [ 10.032804] ? init_module_from_file+0xf4/0x120 [ 10.032813] idempotent_init_module+0x10f/0x300 [ 10.032820] __x64_sys_finit_module+0x73/0xf0 [ 10.032824] ? srso_return_thunk+0x5/0x5f [ 10.032829] x64_sys_call+0x1d68/0x26b0 [ 10.032834] do_syscall_64+0x81/0x500 [ 10.032839] ? srso_return_thunk+0x5/0x5f [ 10.032843] ? do_syscall_64+0x2e5/0x500 [ 10.032848] ? srso_return_thunk+0x5/0x5f [ 10.032852] ? native_flush_tlb_global+0x95/0xb0 [ 10.032860] ? srso_return_thunk+0x5/0x5f [ 10.032864] ? __flush_tlb_all+0x13/0x60 [ 10.032870] ? srso_return_thunk+0x5/0x5f [ 10.032874] ? do_flush_tlb_all+0xe/0x20 [ 10.032879] ? srso_return_thunk+0x5/0x5f [ 10.032882] ? __flush_smp_call_function_queue+0x9c/0x430 [ 10.032888] ? srso_return_thunk+0x5/0x5f [ 10.032897] ? irqentry_exit+0xb2/0x740 [ 10.032901] ? srso_return_thunk+0x5/0x5f [ 10.032906] ? srso_return_thunk+0x5/0x5f [ 10.032911] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 10.032915] RIP: 0033:0x7c80c1d3490d [ 10.032920] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d3 f4 0f 00 f7 d8 64 89 01 48 [ 10.032923] RSP: 002b:00007fff3a12fe28 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 10.032928] RAX: ffffffffffffffda RBX: 00005c44096804f0 RCX: 00007c80c1d3490d [ 10.032930] RDX: 0000000000000000 RSI: 00005c4409681690 RDI: 000000000000002b [ 10.032933] RBP: 00007fff3a12fec0 R08: 0000000000000000 R09: 00005c4409681790 [ 10.032935] R10: 0000000000000000 R11: 0000000000000246 R12: 00005c4409681690 [ 10.032937] R13: 0000000000020000 R14: 00005c44094ff7f0 R15: 00005c4409681690 [ 10.032945] </TASK> [ 10.032948] ---[ end trace 0000000000000000 ]--- [How] Add wrapper function to guard fpu properly for dcn21/dcn31/dcn315/dcn316. Fixes: 3539437f354b ("drm/amd/display: Move FPU Guards From DML To DC - Part 1") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Rafal Ostrowski <rafal.ostrowski@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Promote DC to 3.2.378Taimur Hassan
DC v3.2.378 summary: New: - Add p-state schedule admissibility flags and frame-time utility Fixes: - Fixed incorrect math_mod() result due to wrong variable in fmod implementation (Cc: stable) - Use overlay cursor when a color pipeline is active to avoid incorrect rendering Cleanups: - Add const qualifiers to watermark params struct - Fix narrowing-conversion compiler warnings Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: add pstate schedule admissibility flags and frame-time utilityWenjing Liu
[Why] Core needs to track pstate schedule admissibility for different global change scenarios (fclk, temp read, PPT) and requires a reusable way to compute per-stream frame time from timing parameters. [How] Extend dml2_core_internal_mode_support_info with: fclk_pstate_schedule_admissible temp_read_pstate_schedule_admissible ppt_pstate_schedule_admissible Add dummy_double_array[3][DML2_MAX_PLANES] to dml2_core_calcs_mode_support_locals. Introduce dml2_core_utils_get_frame_time_us() in dml2_core_utils.c and export it in dml2_core_utils.h to compute frame time in microseconds from stream timing (vline time * (vactive + vblank)). Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: add const qualifiers to watermark params structWenjing Liu
[why] There are few non const input pointer fields. Setting them to const to prevent future modification of read-only data. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: fix math_mod() using arg1 instead of arg2Wenjing Liu
[Why] math_mod() multiplied by arg1 instead of arg2, returning a wrong result for any non-trivial modulo operation. [How] Replace arg1 with arg2 in the subtraction term to correctly implement fmod(arg1, arg2). Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Use overlay cursor when color pipeline is activeAlex Hung
Force overlay cursor mode when an underlying plane has a non-bypassed color pipeline to avoid incorrect cursor transformation. Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Fix compiler warningsGaghik Khachatrian
[Why] Implicit conversions from wider integer types to byte-sized fields were generating compiler warnings. These warnings hide intentional protocol /storage boundaries and reduce signal quality during builds. Making conversion intent explicit improves readability and warning hygiene without changing behavior. [How] Added explicit, type-safe casts at intentional narrow-storage boundaries. Kept data models & runtime logic unchanged, only clarifying conversion intent. Functionality and behavior is unchanged; only type intent is explicit. Aligned warning cleanup with existing coding standards for explicit boundary conversions. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: fix NULL ptr deref in ISM delayed workRay Wu
dc_destroy() sets dm->dc to NULL before amdgpu_dm_ism_fini() is called, leaving a window where in-flight ISM delayed work dereferences the stale pointer. Call amdgpu_dm_ism_fini() in amdgpu_dm_fini() before dc_destroy(). Fixes: 754003486c3c ("drm/amd/display: Add Idle state manager(ISM)") Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Add missing do_mccs parameter descriptionSrinivasan Shanmugam
Add missing description for do_mccs parameter in amdgpu_dm_update_freesync_caps. Fixes the below with gcc W=1: ../display/amdgpu_dm/amdgpu_dm.c:13269 function parameter 'do_mccs' not described in 'amdgpu_dm_update_freesync_caps' Fixes: 8dc88c6a5948 ("drm/amd/display: Avoid to do MCCS transaction if unnecessary") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Remove redundant includes from DCRoman Li
[Why] The explicit include of linux/array_size.h in Display Core (DC) is redundant. The ARRAY_SIZE macro is already provided by dm_services.h (via os_types.h) which DC includes. [How] Remove the unnecessary #include <linux/array_size.h> from dc_hw_sequencer.c and dce_clock_source.c. Fixes: 2d2366176445 ("drm/amd/display: Replace inline NUM_ELEMENTS macro with ARRAY_SIZE") CC: Linus Probert <linus.probert@gmail.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Promote DC to 3.2.377Taimur Hassan
This version brings along the following updates: - Enable sink freesync via MCCS with pcon whitelist adjustments - Rework YCbCr422 DSC policy - Update DML2.1 parameters - Fix coding style issues and compiler warnings Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Fix coding style issueChuanyu Tseng
[Why & How] Function logic should put after variable declare section, so let's move it. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Remove Duplicate Prefetch ParameterZheng, Austin
[Why/How] UrgLatency value is passed in twice to the prefetch calculations. Once through the UrgentLatency term and once through the Turg term. Only Turg is used in the prefetch calculation so remove the unused UrgentLatency parameter Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Zheng, Austin <Austin.Zheng@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Add DCN42 PMO policy for DML2.1Nicholas Kazlauskas
[Why] The MinTTU policy in DML2.1 does not guarantee that we support p-state in blank. This is a delta vs dml2 and earlier revisions as the prefetch mode override has been removed in favor of a more configurable pstate optimizer. [How] Split off DCN42 with its own PMO helpers so that we can use a simpler strategy of only allowing the mode if we support p-state in vblank and if vactive has enough latency hiding. The actual hookup to use these helpers in the PMO factory will be done in a later patch to satisfy build system requirements. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: move memory latency update to dml for dcn42Dmytro Laktyushkin
Memory latencies are soc specific and should be part of dml soc bounding box. This change removes them from clk_mgr and has latency update happen based on memory type when dml socbb is being updated. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Fix implicit narrowing conversions in modulesGaghik Khachatrian
[Why]: Implicit narrowing of wider integer types (unsigned int, uint64_t) into narrower fields (uint8_t, uint16_t, unsigned short) has potential truncation issues. [How]: For each warning site, added ASSERT(<value> <= 0xFFFF/0xFF) for debug-mode bounds verification followed by an explicit cast. Typed intermediate variables introduced where needed for clarity. No functional change intended. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: update dcn42 memory latenciesDmytro Laktyushkin
Add latency update based on memory type to dml2.1 Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Fix DCN42 gpuvm_min_page_size_kbytes in SOC BBNicholas Kazlauskas
[Why & How] To match the HW specification this should be 4, not 256. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Pass min page size from SOC BB to dml2_1 plane configNicholas Kazlauskas
[Why] Like dml2_0 this isn't guaranteed to be constant for every ASIC. This can cause corruption or underflow for linear surfaces due to a wrong PTE_ROW_HEIGHT_LINEAR value if not correctly specified. [How] Like dml2_0 pass in the SOC bb into the plane configuration population functions. Set both GPUVM and HostVM page sizes in the overrides. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Correct MALL parameters for DCN42 soc bbNicholas Kazlauskas
[Why & How] The MALL and DCC parameters were copied and pasted from a previous ASIC but the correct value per HW specification should all be 0. If not correct this can impact urgent bandwidth calculation and PMO. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Fix HostVMMinPageSize unit mismatch in DML2.1Nicholas Kazlauskas
[Why] This was found back on DML2 but was missed when creating DML2.1. The bottom layer calculation (CalculateHostVMDynamicLevels) expects a value in bytes, not KB, but we pass in the value in KB (eg. 4). This causes an extra page table level to be required in the prefetch bytes which can be significant overhead - preventing some modes from being supported that should otherwise be. [How] Correct the units by multiplying the input and override values by 1024. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Avoid to do MCCS transaction if unnecessaryWayne Lin
We don't have to do MCCS/DDCCI transactions with sink side every time by calling get_modes(). Limit it to be operated when hotplug occurs. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Enable sink freesync via MCCSWayne Lin
If sink like HDMI indicates supporting freesync via MCCS, explicitly to send vcp set command on sink to enable freesync. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-06-12 07:31:31 +0000