| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
We need to exit PSR/IPS before programming. Before calling DC for
programming in amdgpu_dm_commit_planes(), there's a
vblank_control_workqueue flush. This waits for IPS and PSR exit. (See
drm_vblank_on/off() > amdgpu_dm_crtc_set_vblank() --queue_work()->
amdgpu_dm_crtc_vblank_control_worker())
Prior to the tagged "Fixes:" change, drm_vblank_get() was called before
the workqueue flush. This ordering ensures that PSR exit occurred before
programming. After the "Fixes:" change, drm_vblank_get() is called after
the workqueue flush, leading to programming while idle optimizations are
still active. This can lead to incorrect flip_pending detection used by
vblank event delivery.
[How]
Split the vblank_get() component of `dm_arm_vblank_event()` into
`dm_arm_vblank_event_pre_programming()`, which is called before
programming. Call it before the vblank_control_workqueue flush.
Includes a drive-by cleanup of prepare_flip_isr(): the only caller is
dm_arm_vblank_event() and it's simple enough to roll-in.
v2: Fix checkpatch formatting warning on
drm_arm_vblank_event_pre_programming() arg alignment.
Fixes: 48ab86360af1 ("drm/amd/display: check GRPH_FLIP status before sending event")
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141#note_3583205
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5527
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Claude:opus-5
Suggested-by: David Weber <weber.aulendorf@gmail.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05984e29520a28c27f5a2388742c957a6a87ee7a)
|
|
APUs use firmware-owned DPM tables and do not support replacement through
pp_table. Generic callbacks can nevertheless expose the sysfs file and
accept an upload before resetting the power management stack.
Treat pp_table as unsupported on APUs. Use the same platform check in the
get and set paths to hide the file and reject uploads.
Fixes: 289921b03fe5 ("drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74f28db2db69777cd2f059d50fe34e365ddd5add)
Cc: stable@vger.kernel.org
|
|
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1271175
Closes: https://lore.kernel.org/all/a9ee54e6-2413-4156-9bde-d528ae3c63a3@kernel.org/
Fixes: 1296423bf23c ("drm/amd/display: define DC_LOGGER for logger")
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0)
Cc: stable@vger.kernel.org
|
|
On APUs, the GTT pool is backed by system RAM, but its size is not bound
to the non-carveout memory that actually backs it. A user can end up
with GTT + VRAM exceeding total physical memory through the following
sequence:
- Have a large non-carveout memory space (~128GB) and accordingly set a
large GTT (~100GB) via the ttm module parameter.
- Lower the non-carveout memory space in BIOS by increasing the UMA
Frame Buffer Size (VRAM) to 64GB.
- The previously set GTT value (~100GB) persists, even though the new
non-carveout space (64GB) can no longer back it.
This leads to a case where kernel reports GTT (100GB) + VRAM (64GB)
despite the sum being greater than total physical memory (128GB).
Cap the GTT size to totalram_pages() on APUs. totalram_pages() already
excludes the VRAM carveout, so the resulting GTT can never exceed the
system RAM that actually backs it.
Signed-off-by: Harkirat Gill <harkirat.gill@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Assisted-by: Claude:claude-opus-4
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5dafdd649280c7dc6c22c8f877da3f54fcc441e1)
Cc: stable@vger.kernel.org
|
|
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f3c ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121fb6 ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 757ba0790bafec47a507e9662bf380f2e027d420)
Cc: stable@vger.kernel.org
|
|
Runtime suspend runs GFX hw_fini and clears perfmon clock gating while
the UMD profile DPM level remains set in software. Re-apply stable
pstate after a successful runtime resume when a profile mode is active.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 138531c8850cc247aa12b104bb29ea387bcdcbb1)
Cc: stable@vger.kernel.org
|
|
Commit a4f01bf729b2 ("drm/amd/display: Refactor and fix link_dpms I2C")
had also changed the "Set retimer failed" messages from DC_LOG_DEBUG()
to DC_LOG_ERROR(). This unfortunately can create log spam.
Change those back to DC_LOG_DEBUG() only.
Fixes: a4f01bf729b2 ("drm/amd/display: Refactor and fix link_dpms I2C")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5520
Signed-off-by: Alan Swanson <reiver@improbability.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da8609eef18b0a3490d0e1fa9440659fadc8194d)
Cc: stable@vger.kernel.org
|
|
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
Fixes: 40e8a766a761 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa)
Cc: stable@vger.kernel.org
|
|
Verify that the phantom plane was allocated to avoid a later
segfault.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4970
Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f)
Cc: stable@vger.kernel.org
|
|
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5302
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da)
Cc: stable@vger.kernel.org
|
|
Port the three-frame wait logic from dcn30_set_avmute to
dce110_set_avmute so that older DCN versions (1.0, 2.0) also
wait for GCP packets to be sent out before proceeding.
This ensures HDMI sinks properly process the mute state,
preventing garbled display after link re-establishment.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 414da24137ace80d8c59fefd43ba3ec9f5f854ba)
Cc: stable@vger.kernel.org
|
|
amdgpu_dpm_get_gpu_metrics() returns a pointer to the shared metrics cache
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
Another reader can refresh the cache in place during the copy and return a
snapshot containing data from two generations.
Pass caller-provided storage through the DPM interface and copy the metrics
while the mutex is held. This keeps the cache pointer private and makes each
sysfs read observe one complete sample.
Fixes: 25c933b1c4fc ("drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 862333bb48693ecafcae25af0c9d9ec31015ac77)
Cc: stable@vger.kernel.org
|
|
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
Fixes: 1684d3ba4885 ("drm/amd/amdgpu: change pptable output format from ASCII to binary")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631)
Cc: stable@vger.kernel.org
|
|
Set the default reset method to mode2 for SMU 15.0.5.
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 314d49abe315cd0d0a872a43f68f08be43a305c8)
|
|
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
Fixes: 42ea9cf2f16b ("drm/amdkfd: Relax size checking during queue buffer get")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef)
Cc: stable@vger.kernel.org
|
|
Fix NBIO 7.11.5 related offsets
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dcc27ae3092211c913a1bea04618c4faf1234d48)
|
|
Add PSP 15.0.5 related offsets for GFX to KMD interface
and enable support for it.
Co-developed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b01e244c82c5d033d7424a64abe4079f3fceb869)
|
|
Prevent unauthorized termination of active GPU debug sessions.
Previously, users with /dev/kfd access could terminate another process's
debug session without proper ownership or ptrace authorization.
Signed-off-by: Gang Ba <Gang.Ba@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4db4c5ffd5585b72622ecf6ffedf2da258ee23f5)
Cc: stable@vger.kernel.org
|
|
The commit referenced below restarts the CS if the validation is
still in progress. When debug_vm is enabled, all BOs from the CS
are invalidated so we will hit an infinite loop.
To avoid that, defer BO invalidation to amdgpu_cs_parser_fini.
Fixes: 59720bfd8c6d ("drm/amdgpu: restart the CS if some parts of the VM are still invalidated")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8c990ee9daa295462df24982ce6878db997a380a)
Cc: stable@vger.kernel.org
|
|
Update smu v15.0.0 driver if header to be v15.0.5 compatible.
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ee6561f8ae0ae3c80d04429361a6e06589693fc)
|
|
In kfd_criu_restore_event, there was no handling for
the event priv data having an invalid event type. The priv
data here is untrusted and can be invalid.
In that case, fail with EINVAL.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2e8e9963cd5c41aa14fd5316bf9ec92e7a0e3097)
Cc: stable@vger.kernel.org
|
|
Updates PPSMC_MSGs and set/get functions for gathering GFXOFF logs
on Van Gogh. Logs are now gathered live rather than starting then
stopping logging and reading an average value afterwards. This is
in accordance to changes made in PMFW.
In regards to messageID 0x52, the old interface uses a start/stop
parameter, and the new one doesn't. The firmware is checked to
determine which method to use.
v2: added firmware guard to new interface, old interface kept as
fallback
Signed-off-by: Fares Soliman <Fares.Soliman@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 482e2cadea8c34ae4e733f269a640d6b04fc9262)
|
|
Building for ARCH=um with W=1 C=1 makes the "amd_sriov_msg_vf2pf_info
must be 1 KB" static assertion in amdgv_sriovmsg.h fail under sparse,
exposed after UML builds were enabled.
Sparse does not honor #pragma pack(push, 1) for the nested ucode_info
struct, so it sizes each element as 8 bytes instead of 5 and computes
the surrounding structure as larger than 1 KB. The compilers get this
right via the enclosing pragma, but the annotation should be explicit.
Fixes: af3f2f5db265 ("drm/amdgpu: Remove UML build exclusion from Kconfig")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607091659.SHEscT0c-lkp@intel.com/
Cc: Harry Wentland <harry.wentland@amd.com>
Assisted-by: Copilot:Claude-Opus-4.8
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1d8cfeb69daa863a70134b8ed6df8055c418a5b0)
|
|
Building for ARCH=um with W=1 C=1 makes sparse report "incompatible
types in comparison expression (different address spaces)" warnings in
the KFD code, exposed after UML builds were enabled:
- amdgpu_amdkfd_fence.c compares the __rcu-annotated dma_fence.ops
pointer directly in to_amdgpu_amdkfd_fence().
- amdgpu_amdkfd_gpuvm.c compares the __rcu eviction fence pointer
directly in amdgpu_amdkfd_gpuvm_restore_process_bos().
Fixes: af3f2f5db265 ("drm/amdgpu: Remove UML build exclusion from Kconfig")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607091659.SHEscT0c-lkp@intel.com/
Cc: Harry Wentland <harry.wentland@amd.com>
Assisted-by: Copilot:Claude-Opus-4.8
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 764f241ad227bb942e5b0b8b4d9898f1a4175605)
|
|
When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during
the first queue creation for a process, pqm_create_queue() returns
early via 'return retval' without going through the err_create_queue
cleanup label.
This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called,
leaving the reserved QID bit permanently set in queue_slot_bitmap.
Over time this leaks QID slots, potentially exhausting all available
queue slots.
Fix this by replacing 'return retval' with 'goto err_allocate_pqn'
so that clear_bit() is always called on the error path without
touching the uninitialized pqn pointer.
AILIKFD-813
Reported-by: Deucher, Alexander <alexander.deucher@amd.com>
Signed-off-by: Vladimir Marioukhine <Vladimir.Marioukhine@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a107f74c38edbb80d6ab64dcaeeb292c14e9779f)
Cc: stable@vger.kernel.org
|
|
Some HDMI sinks need additional GCP packets to properly process the
mute state before the timing generator is disabled, especially after
link re-establishment with HDMI 2.0 scrambling enabled. Waiting for
only 2 frames is insufficient for certain monitor firmware, resulting
in garbled display output on resume from suspend.
Increase the AV mute wait in dcn30_set_avmute() from 2 to 3 frames
to ensure the sink receives enough GCP packets.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167
Assisted-by: Cursor:Claude-Opus-4.6
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0c0d5174b09640d8b560764aa5a177630e076e93)
Cc: stable@vger.kernel.org
|
|
amdgpu_vm_clear_freed() allocates an amdgpu_sync object and walks the VM
reservation fences via amdgpu_sync_resv() before checking whether vm->freed
has anything to clear. Return early when the list is empty to skip this
overhead on a hot path (every GEM close and command submission).
Signed-off-by: Bob Zhou <bobzhou2@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8ba869e852d4f1b1c0e5ae9225c77f7ceccbe056)
|
|
Instead of pinning the wptr bo attach the eviction fence to
the bo to make sure it remains valid all the time.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7264bc10c7c657a54603c7fc058bf8e15f18ce12)
|
|
The CRAT parser validates that the subtype header fits within the image,
but does not verify that the advertised subtype length fits. A malformed
CRAT table with an oversized length field causes out-of-bounds reads when
kfd_parse_subtype() casts the header to specific subtype structures.
Add validation that sub_type_hdr + length does not exceed the image
boundary before parsing the subtype contents.
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d)
Cc: stable@vger.kernel.org
|
|
This patch requests PSP to set the sec lvl for
vcn and jpeg.
Signed-off-by: Suresh Guttula <suresh.guttula@amd.com>
Reviewed-by: McRae Geoffrey<Geoffrey.McRae@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4c8b8472f85a730a6853ab68474f210143f42b5a)
|
|
This line was lost when cping from amd-staging-drm-next to drm-fixes.
So add it back.
Cc: stable@vger.kernel.org
Fixes: 8382cd234981 ("drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock")
Reported-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260723134450.13838-1-sunpeng.li@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The vblank on/off callbacks mixed use of amdgpu_irq_get/put() and
amdgpu_dm_crtc_set_vupdate_irq() to enable and disable IRQs.
With get/put, base driver will callback into DC to disable IRQs when
refcount == 0. With set_vupdate_irq(), DC is called directly to disable
IRQs, bypassing base driver's refcount tracking.
During gpu reset, base driver can restore IRQs via
amdgpu_irq_gpu_reset_resume_helper() > amdgpu_irq_update(). So if
get/put() is not used (i.e. refcount == 0), then vupdate_irq will be
disabled.
This is problematic if DRM requests vblank on before amdgpu_irq_update()
is called: drm_vblank_on() > set_vupdate_irq() enables vupdate_irq, but
the refcount is still 0. gpu_reset_resume_helper() > irq_update() then
immediately disables it, thus leading to flip done timeouts.
This is made worse on DCN since VUPDATE_NO_LOCK is the only IRQ enabled.
Prior to 8382cd234981, a combination of GRPH_FLIP and VSTARTUP IRQs were
used, and they used get/put(). This explains why 8382cd234981 exposed
this issue.
Fix by using get/put() instead of set_vupdate_irq(). DCE is unchanged,
since it relies on unbalanced enable/disable calls based on VRR status,
and hence requires direct set_vupdate_irq(). Plus, it also uses
GRPH_FLIP and VLINE IRQs, which are properly tracked by get/put().
Cc: stable@vger.kernel.org
Fixes: 8382cd234981 ("drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260723180159.52121-1-sunpeng.li@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Now that proper fixes have been found, let's revert this workaround.
This reverts commit a1fc7bf6677eb547167cb72b3bcafdc34b976692.
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f64a9be5653689ff43e148cd8a6483077488c8e5)
Cc: stable@vger.kernel.org # 8382cd234981: drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock
Cc: stable@vger.kernel.org # 48ab86360af1: drm/amd/display: check GRPH_FLIP status before sending event
Cc: stable@vger.kernel.org
|
|
[Why]
After unifying DCN interrupt sources under VUPDATE_NO_LOCK, we have two
remaining issues to clean up:
1. On DCN, flip completion is now delivered from VUPDATE_NO_LOCK
(dm_crtc_high_irq_handler) instead of GRPH_PFLIP. But VUPDATE_NO_LOCK
fires every frame, regardless of whether a flip has latched.
2. There is a window during commit where a flip is armed (pflip_status =
SUBMITTED) but not yet programmed into HW. If the VUPDATE_NO_LOCK
fires in that window, its handler would deliver a flip event to
userspace before HW has latched to it. If userspace then renders to
what it believes is now the back buffer (but HW is still latched to
it!), it will cause display corruption. This issue seemed to have
been introduced by:
commit 1159898a88db ("drm/amd/display: Handle commit plane with no FB.")
Enabling replay or psr extended the duration of this window, and
hence made corruption more likely to be observed.
[How]
* Move acrtc->event/pflip_status arming to after
update_planes_and_stream_adapter() has programmed the flip into HW.
This closes the window where pflip_status is SUBMITTED but the flip is
not yet programmed.
* Add dc_get_flip_pending_on_otg(), which reads the HUBP flip-pending
status straight from HW for the pipe(s) bound to an OTG instance. It
is keyed only by otg_inst and does not take or mutate a
dc_plane_state, so it is safe to call from the OTG interrupt handler
without racing a concurrent commit that may be modifying plane state.
* Optimistically query for flip-pending after programming, in the event
that HW latched to the new fb between programming start and arming
event. If it latched, send the vblank event immediately, rather than
wait for the next vblank IRQ.
* In the VUPDATE_NO_LOCK handler, only deliver flip completion once
dc_get_flip_pending_on_otg() reports the flip is no longer pending.
Otherwise leave the flip armed and retry on the next vupdate.
* For DCE, maintain the existing behavior of arming flips before
programming, and relying on GRPH_FLIP to fire at HW latch.
v2:
* Drop flip_programmed completion object, instead move
event/pflip_status arming after programming.
* For DCN, optimistically query for flip pending immediately after
programming, and if it latched, send event right away.
v3:
* Fix event timestamps on optimistic flip latch detection, where it's
possible for it to run *before* the vupdate IRQ updates the timestamp.
* Add more docstrings for DCN vblank handling.
* Clean up if conditions in dm_arm_vblank_event().
* Code style cleanup on braces surrounding multi-line statements.
Fixes: 9b47278cec98 ("drm/amd/display: temp w/a for dGPU to enter idle optimizations")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/3787
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141
Assisted-by: Copilot:claude-opus-4.8
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f64a9be5653689ff43e148cd8a6483077488c8e5)
Cc: stable@vger.kernel.org # 8382cd234981: drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock
Cc: stable@vger.kernel.org
|
|
[Why]
On DCN, vblank events were delivered from VSTARTUP/VUPDATE
(dm_crtc_high_irq/dm_vupdate_high_irq) and pageflip completion from
GRPH_PFLIP (dm_pflip_high_irq). These signals can be masked by hardware
by a few things:
* DPG - DCN can Dynamically Power Gate parts of the display pipe when a
self-refresh capable eDP is connected. DPG is engaged when there's
enough static frames (detected through drm_vblank_off). Once gated,
even though the OTG (output timing generator) is still enabled,
VSTARTUP and GRPH_FLIP are masked.
* GSL - Driver can use the Global Sync Lock to block HW from latching
onto double-buffered registers during programming, to prevent HW from
latching onto a partially programmed state. This will mask VSTARTUP,
GRPH_FLIP, and VUPDATE. See dcn20_pipe_control_lock().
* MALL - A DCN accessible cache introduced in DCN32+ DGPUs that can
store fb data to allow for longer DRAM sleep. When scanning out from
MALL, VSTARTUP is masked.
When masked, events are never delivered, which can show up as flip_done
timeouts in the wild.
However, there is an interrupt source on DCN that is never masked:
VUPDATE_NO_LOCK. It's simply an unmasked variant of VUPDATE, which fires
while the OTG is active, at the exact point hardware latches
double-buffered registers. It is therefore the natural single signal for
delivering both vblank and flip-completion events on DCN, and the
correct point to timestamp both VRR and non-VRR vblanks.
DCE's interrupt sources are different, it does not have an unmaskable
VUPDATE_NO_LOCK. The only unmaskable DCE interrupt is VLINE0, but it can
only be programmed as a vline offset from vsync_start, making it
unsuitable for VRR. Thus, we keep DCE untouched and use the existing mix
of interrupt sources.
[How]
For DCN1 and newer only:
* Factor the body of dm_crtc_high_irq() into dm_crtc_high_irq_handler()
and drive it from dm_vupdate_high_irq() (VUPDATE_NO_LOCK). DCE keeps
using dm_crtc_high_irq() (VSTARTUP) and dm_pflip_high_irq()
(GRPH_PFLIP) unchanged.
* Stop registering VSTARTUP (crtc_irq) and GRPH_PFLIP (pageflip_irq) on
DCN, and stop enabling them in amdgpu_dm_crtc_set_vblank() /
manage_dm_interrupts(). Enable VUPDATE whenever vblank is enabled on
DCN (previously only in VRR mode). The secure-display vline0 interrupt
is left untouched.
* VUPDATE_NO_LOCK does not early-fire on an immediate (tearing / async)
flip, since HW latches the new address right away. Deliver the flip
completion event immediately after programming such flips in
amdgpu_dm_commit_planes(), and clear pflip_status so the next vupdate
handler does not double-send.
v2: Do not gate VUPDATE_NO_LOCK on DCN in dm_handle_vrr_transition()
Also toggle VUPDATE_NO_LOCK on DCN in dm_gpureset_toggle_interrupts()
Re-cook vblank event count and timestamp for immediate flips
Fixes: 9b47278cec98 ("drm/amd/display: temp w/a for dGPU to enter idle optimizations")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/3787
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141
Assisted-by: Copilot:claude-opus-4.8
Co-developed-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c87e6635d2db02c88ae8d09529362da672d34770)
Cc: stable@vger.kernel.org
|
|
Some AMD APU multi-function devices expose an integrated USB xHCI
controller. In some circumstances (such as larger VRAM), the PM core
can resume can fail when the xHCI controller is resuming in parallel
with the GPU/display function.
On affected systems, the xHCI controller can complete pci_pm_resume
and start resuming USB devices while the GPU is still in its much
longer resume path. This race condition leads to USB device resume
failures followed by:
xhci_hcd ...: xHCI host not responding to stop endpoint command
xhci_hcd ...: HC died; cleaning up
Create a device link from any xHCI controller sharing the same PCIe
root port as the APU display function. The link uses DL_FLAG_STATELESS
and DL_FLAG_PM_RUNTIME to ensure the GPU completes its resume before
the xHCI controller begins resuming USB devices.
This device link is done specifically in amdgpu so that if the
platform firmware has been modified such that this issue doesn't happen
the version can be detected and the workaround skipped.
Suggested-by: Aaron Ma <aaron.ma@canonical.com>
Reported-by: mrh@frame.work
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221073
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Alexander F <superveridical@gmail.com>
Tested-by: Francis DB <francisdb@gmail.com>
Link: https://patch.msgid.link/20260713195313.1739762-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 07c93d7eeb0d990bc1b8e3b1eafa464bc9feee97)
Cc: stable@vger.kernel.org
|
|
DCN42B enables DML2 and DML21 by default and defines
dcn42b_prepare_mcache_programming(), but the resource function table only
wires the callback when CONFIG_DRM_AMD_DC_DML21 is defined.
There is no in-tree Kconfig symbol named DRM_AMD_DC_DML21, so the
preprocessor always removes the callback entry. Sibling DCN42 and DCN401
resource tables wire their prepare_mcache_programming callbacks
unconditionally, and the core DC code already checks whether the callback
pointer is present before calling it.
Remove the stale guard so DCN42B exposes the callback relation that its
source and DML21 build world already provide.
This is an RFC patch draft from static conditional callback legality
auditing. It needs AMD display maintainer review before submission as a
final fix.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 85453fb4ff726e1ddb9984ee83dca260903c5353)
|
|
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
Fixes: 9b690ef3c704 ("drm/amd/display: Avoid full modeset when not required")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28)
Cc: stable@vger.kernel.org
|
|
The Lenovo Legion 5 15ARH05 (Renoir) ships a BOE 0x08DF eDP panel that
advertises AUX/DPCD backlight control, so amdgpu's automatic detection
(amdgpu_backlight == -1) selects AUX. On this panel the AUX backlight
path has no effect: brightness writes are accepted but the panel level
never changes, the display is stuck at a fixed brightness and
max_brightness is reported as a bogus 511000. As a result neither the
desktop brightness slider nor the brightness hotkeys do anything.
Forcing PWM backlight (amdgpu.backlight=0) restores working control:
max_brightness becomes 65535 and the level tracks writes. This has long
been applied by users as a manual kernel-parameter workaround.
Extend the generic panel backlight quirk with a force_pwm flag, add an
entry for the Legion 5 15ARH05 / BOE 0x08DF panel, and have amdgpu
disable AUX backlight (use PWM) when the quirk matches and the user
lets the driver auto-select the backlight type.
Signed-off-by: Alessandro Rinaldi <ale@alerinaldi.it>
Tested-by: Alessandro Rinaldi <ale@alerinaldi.it>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81b39f43e7e53589491e2eef6bad5389626b4b9c)
Cc: stable@vger.kernel.org
|
|
The change referenced by the Fixes tag releases the HIQ SDMA MQD trunk
buffer when device_queue_manager_init() fails after it has been
allocated.
However, the same failure path can also be reached after
init_mqd_managers() has succeeded. At that point dqm->mqd_mgrs[] contains
per-type MQD manager objects owned by the device queue manager. The
normal teardown path frees those objects from uninitialize(), but the
initialization error path only frees dqm itself.
Free the MQD managers from the initialization error path as well. This is
safe for earlier failures because dqm is zeroed when allocated and
init_mqd_managers() clears the entries it rolls back internally.
Fixes: b7cccc8286bb ("drm/amdkfd: fix a memory leak in device_queue_manager_init()")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1fff2e07b6670bc5b8f7344a8708c136259cb176)
Cc: stable@vger.kernel.org
|
|
Allow using multiple SDMA schedulers only on GPUs where
we are allowed to do concurrent VM flushes.
This consideration is necessary because all GART windows
are mapped in VMID 0 (the kernel VMID) so each buffer
entity would flush VMID 0 concurrently.
Practically this means that we can't use multiple SDMA
engines for TTM on GFX6-8 and Navi 1x.
Fixes: 01c836788b37 ("drm/amdgpu: pass all the sdma scheds to amdgpu_mman")
Fixes: e4029f7a9474 ("drm/amdgpu: only use working sdma schedulers for ttm")
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a8171229bc836607fbc225d323ebc4d14489cfbb)
|
|
There were two mistakes in the previous implementation:
The check for AutomaticDCTransition should be inverted.
We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the smu7_apply_state_adjust_rules() function selects
different limits on AC and DC.
Fixes: 96da0d86614e ("drm/amd/pm/smu7: Notify SMU7 of DC->AC switch")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 516f8fc30a1b56af03f39e93c18707d13419fb1f)
Cc: stable@vger.kernel.org
|
|
AMD Ryzen Pinnacle Ridge (Zen+, family 0x17 model 0x08) CPUs have
PCI controllers that don't support PCIe dynamic speed switching,
causing system freezes during GPU initialization when enabled.
Disable dynamic speed switching when this CPU is detected.
Assisted-by: Claude:sonnet
Fixes: 466a7d115326 ("drm/amd: Use the first non-dGPU PCI device for BW limits")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5436
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Link: https://patch.msgid.link/20260709031520.841611-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9ceb4e034a327a04155f32f1cd1a5031dfa5fe02)
Cc: stable@vger.kernel.org
|
|
We need the fence to reemit the gds switch or spm update
after a queue reset.
Fixes: a17ef941212b ("drm/amdgpu: rework ring reset backup and reemit v9")
Cc: timur.kristof@gmail.com
Cc: christian.koenig@amd.com
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bc639a9eadc75822f7f15a4315c198a4b5513bd2)
Cc: stable@vger.kernel.org
|
|
There were two mistakes in the previous implementation:
The check for ATOM_PP_PLATFORM_CAP_HARDWAREDC should be
inverted. We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the si_apply_state_adjust_rules() function selects different
limits on AC and DC.
Fixes: 2d071f6457af ("drm/amd/pm/si: Notify the SMC when switching to AC")
Tested-by: Jeremy Klarenbeek <jeremy.klarenbeek99@gmail.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 358dd0a9ce66d898fa934887385327547d599d88)
Cc: stable@vger.kernel.org
|
|
When DPM is turned off with the amdgpu.dpm=0 module parameter,
the thermal work queue isn't initialized so we shouldn't
schedule any work on it.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2)
|
|
On DCE8-class ASICs (e.g. Bonaire), the resource pool contains digital
DIG stream encoders plus one analog DAC encoder. When assigning a stream
encoder for a second DisplayPort MST stream, if the preferred digital
encoder is already acquired, dce100_find_first_free_match_stream_enc_for_link()
falls back to the first free pool entry. That entry may be the analog
encoder, whose funcs table lacks DP hooks such as dp_set_stream_attribute.
The subsequent atomic commit then dereferences NULL function pointers in
link_set_dpms_on() and crashes.
Skip encoders without dp_set_stream_attribute when the stream uses a DP
signal (including MST). Use dc_is_dp_signal(stream->signal) for the MST
fallback path instead of checking only the link connector signal.
Tested on:
- GPU: AMD Radeon R7 260X (Bonaire / DCE8)
- Board: Supermicro C9X299-PG300
- Setup: DP MST daisy chain, hotplug second monitor or have it connected on boot
- Kernel: 7.1.3 (issue observed since 6.19)
- Result: kernel oops without patch; dual monitors stable with patch
Signed-off-by: Andriy Korud <a.korud@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5162
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 28ec64943e3ee4d9b8d30cea61e380f1429953a8)
Cc: stable@vger.kernel.org
|
|
Always set native cursor mode when the CRTC is disabled,
to make sure it doesn't cause atomic commits to fail when
they are trying to disable the CRTC.
Fixes: 41af6215cdbc ("drm/amd/display: Reject cursor plane on DCE when scaled differently than primary")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5432
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2f79f0130f828cf26fe2dcf45291821616af7b47)
Cc: stable@vger.kernel.org
|
|
The old radeon driver has a documented workaround in ci_dpm.c
which claims that Bonaire 0x6658 with old memory controller
firmware is unstable with MCLK DPM, so as a precaution I
disabled MCLK DPM on this ASIC in amdgpu.
Note that the old MC firmware is not actually used with
amdgpu, but in theory it's possible that the VBIOS sets
up the ASIC with an old MC firmware that is already running
when amdgpu initializes (in which case amdgpu doesn't
load its own firmware).
What I expected to happen is that the GPU would simply use
its maximum memory clock, and indeed this is what seemed
to happen according to amdgpu_pm_info which reads the
current MCLK value from the SMU.
However, some users reported a huge perf regression
and upon a closer look it seems that the GPU seems to
not actually use the highest MCLK value, despite the SMU
reporting that it does.
Let's not disable MCLK DPM on Bonaire 0x6658 (R7 260X).
Keep MCLK DPM disabled on R9 M380 in the 2015 iMac
because that still hangs if we enable it.
Fixes: 9851f29cb06c ("drm/amd/pm/ci: Disable MCLK DPM on problematic CI ASICs")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d34acad064ee7d82bd18f5d87592c422d4d323ac)
Cc: stable@vger.kernel.org
|
|
When compiling the AMDGPU display driver for 32-bit architectures,
the linker reports undefined reference to `__udivdi3` in functions
get_dp_dto_frequency_100hz() and dcn401_get_dp_dto_frequency_100hz().
This is because the code uses 64-bit division (/) on 32-bit systems,
which GCC cannot handle directly and instead tries to call the missing
__udivdi3 helper function.
Replace the raw division with div_u64(), the kernel's standard 64-bit
division helper, to avoid the link error.
Signed-off-by: Linlin Yang <yanglinlin@kylinos.cn>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0421fc6ab3a8514e99156ff3c2cee13ee9af3fa7)
Cc: stable@vger.kernel.org
|
