| Age | Commit message (Collapse) | Author |
|---|
|
When a reviewer asks a developer to run an upstream test during code
review, it's often ambiguous whether the test was actually run against
a real device, or just against netdevsim. Print the driver name and
ifname at the start of the test, e.g.:
# Interface: enp0s13f0u1u4, driver: r8152
TAP version 13
1..1
ok 1 ...
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260803211944.2166211-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a reconfig_tx_stall test that detects the possibility of a TX stall
after ring reconfiguration. The key observation is that drivers using
netif_tx_start_all_queues() are prone to experiencing a stall when
reconfiguration completes compared to drivers using
netif_tx_wake_all_queues(). start_all_queues only clears DRV_XOFF, while
wake_all_queues also calls __netif_schedule() to kick the qdisc. Without
the kick, qdisc backlog present at reconfig time can stay stuck until a
new trigger is issued.
The test caps the TX ring at 64 entries so it fills quickly, then
installs FQ on a target TX queue and sends UDP packets with SO_TXTIME
scheduled in the future. With napi_defer_hard_irqs slowing completions,
the small ring can fill when FQ releases the burst, leaving requeued
qdisc backlog with no FQ timer to rescue it. A subsequent ring reconfig
must wake the queues to drain the backlog. Simply starting the queues can
leave it stuck.
Some drivers lack backpressure on the TX path and may not be able to
build up the qdisc backlog the test relies on. In that case report an
expected failure (xfail) instead of a hard failure.
Testing on some of the existing drivers: Driver-A does not have the bug,
Driver-B has the bug, Driver-C had the bug but it is fixed now.
Driver-A:
./drivers/net/ring_reconfig.py -t reconfig_tx_stall
TAP version 13
1..1
Sent 1024 SO_TXTIME packets (+100ms)
Backlog before reconfig: 1176378 bytes
ok 1 ring_reconfig.reconfig_tx_stall
Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Driver-B:
TAP version 13
1..1
Sent 128 SO_TXTIME packets (+100ms)
Sent 128 SO_TXTIME packets (+200ms)
Backlog before reconfig: 148372 bytes
Check| At ./drivers/net/ring_reconfig.py, line 397, in reconfig_tx_stall:
Check| ksft_eq(0, backlog,
Check failed 0 != 148372 qdisc backlog stuck on queue 1 after ring ....
not ok 1 ring_reconfig.reconfig_tx_stall
Totals: pass:0 fail:1 xfail:0 xpass:0 skip:0 error:0
Driver-C:
TAP version 13
1..1
Sent 128 SO_TXTIME packets (+100ms)
Backlog before reconfig: 192278 bytes
ok 1 ring_reconfig.reconfig_tx_stall
Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260731021543.1058526-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NetDrvEpEnv picks a single IP version at init time, preferring IPv6 when
both are configured.
Add NetDrvEpEnv.set_ipver() to reselect the IP version and recompute the
derived address fields.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260702062348.2123960-2-noren@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Expose the netkit host ifname as a public attribute nk_host_ifname
(symmetric with the already-public nk_guest_ifname), rename _attach_bpf
to a public attach_bpf, and add a public detach_bpf helper that
encapsulates the tc-filter teardown bookkeeping. Switch the fixtures
to this public API. No functional change and keeps pylint happy.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260614102607.863838-3-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add infrastructure to support PSP tests across network namespaces
using NetDrvContEnv with netkit pairs. This enables testing PSP device
association, where a non-PSP-capable device (e.g. netkit) in a guest
namespace is associated with a real PSP device in the host namespace,
allowing the guest to perform PSP encryption/decryption through the
host's PSP hardware.
The topology is:
Host NS: psp_dev_local <---> nk_host
| |
| | (netkit pair)
| |
Remote NS: psp_dev_peer Guest NS: nk_guest
(responder) (PSP tests)
env.py:
- nk_guest_ifindex is queried after moving the device into the guest
namespace, so tests can use it directly for dev-assoc
psp.py:
- PSP device lookup supports container environments where the PSP
device is on the physical interface, not the test interface
- Association helpers handle dev-assoc/dev-disassoc with defer-based
cleanup to prevent state leaks on test assertion failures
- main() tries NetDrvContEnv with primary_rx_redirect and falls back
to NetDrvEpEnv, so existing tests continue to work without the
container environment
Signed-off-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260608233118.2694144-8-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename _nk_host_ifname to nk_host_ifname in NetDrvContEnv to make it
a public attribute, matching the nk_guest_ifname rename. Tests that
access the host-side netkit interface name (e.g. for cleanup after
deleting the netkit pair) no longer trigger pylint protected-access
warnings.
Signed-off-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260608233118.2694144-7-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add _find_bpf_obj() helper to NetDrvContEnv that searches the test
directory first, then falls back to the hw/ subdirectory. This allows
tests outside drivers/net/hw/ (e.g. psp.py in drivers/net/) to find
BPF objects built in the hw/ directory.
Update _attach_bpf() and _attach_primary_rx_redirect_bpf() to use
_find_bpf_obj() for BPF object discovery.
Signed-off-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260608233118.2694144-6-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add userns_devmem.py, which mirrors nk_devmem.py but places the netkit
guest in a netns whose owning user_ns is non-init. ncdevmem is ran there
via nsenter so the bind-rx call is issued with creds that hold
CAP_NET_ADMIN only in the child user_ns.
Without the preceding GENL_UNS_ADMIN_PERM patch the test fails at
bind-rx with EPERM, but with the patch the transfer completes and tests
pass.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260602-nl-prov-v2-2-ad721142c641@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending from a namespace that has access to a netkit device with a
leased queue, the nk primary in the host namespace needs to redirect its
RX to the physical device. This patch adds that redirection bpf program
and teaches the harness to install it.
Add primary_rx_redirect=False parameter to NetDrvContEnv.__init__().
When enabled, _attach_primary_rx_redirect_bpf() attaches a new BPF TC
program (nk_primary_rx_redirect.bpf.c) to the primary (host-side) netkit
interface. The program redirects non-ICMPv6 IPv6 packets to the physical
NIC via bpf_redirect_neigh(), with the physical ifindex configured via
the .bss map. ICMPv6 is left on the host's netkit primary so IPv6
neighbor discovery still work locally.
Extract _find_bss_map_id() from _attach_bpf() into a reusable helper so
other BPF attachment methods can use it.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260514-tcp-dm-netkit-v5-7-408c59b91e66@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Subsequent patches will use the _nk_guest_ifname as a public attr for
setting up devmem. Rename to nk_guest_ifname to avoid angering the
linter about the '_' prefix being used for a non-private attr.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260514-tcp-dm-netkit-v5-5-408c59b91e66@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc3).
Conflicts:
net/ipv4/igmp.c
726fa7da2d8c ("ipv4: igmp: get rid of IGMPV3_{QQIC,MRC} and simplify calculation")
c6bebaa744f7 ("ipv4: igmp: annotate data-races in igmp_heard_query()")
https://lore.kernel.org/a7365e4873340f7a5e30411207de3bf9@kernel.org
Adjacent changes:
net/psp/psp_main.c
30cb24f97d44 ("psp: strip variable-length PSP header in psp_dev_rcv()")
c2b22277ad89 ("psp: validate IPv4 header fields in psp_dev_rcv()")
net/sched/sch_fq_codel.c
f83e07b29246 ("net/sched: sch_fq_codel: annotate data-races from fq_codel_dump_class_stats()")
3f3aa77ff1c8 ("net/sched: add qstats_cpu_drop_inc() helper")
net/wireless/pmsr.c
0f3c0a197309 ("wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage")
410aa47fd9d3 ("wifi: cfg80211: allow suppressing FTM result reporting for PD requests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a wrapper similar to existing ip, ethtool, ... commands.
Tc takes a slightly different syntax. Account for that.
The first user is the next patch in this series, converting so_txtime
to drv-net. Pacing offload is supported by selected qdiscs only.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260504174056.565319-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The default timeout of cmd() is 5 seconds and Iperf3Runner requests the
iperf3 client to run for 10 seconds, which clearly doesn't work since
commit [1] enforced the timeout parameter.
Use a value derived from duration as timeout (+5 seconds for
startup/teardown/various other overhead).
[1] commit f0bd19316663 ("selftests: net: fix timeout passed as positional argument to communicate()")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h
a6bd339dbb351 ("net_sched: fix skb memory leak in deferred qdisc drops")
ff2998f29f390 ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c
1acdfbdb516b ("net: airoha: Fix VIP configuration for AN7583 SoC")
bf3471e6e6c0 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c
f44218cd5e6a ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()")
7da62262ec96 ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add VLAN filter propagation tests through offloaded MACsec devices via
actual traffic.
The tests create MACsec tunnels with matching SAs on both endpoints,
stack VLANs on top, and verify connectivity with ping. Covered:
- Offloaded MACsec with VLAN (filters propagate to HW)
- Software MACsec with VLAN (no HW filter propagation)
- Offload on/off toggle and verifying traffic still works
On netdevsim this makes use of the VLAN filter debugfs file to actually
validate that filters are applied/removed correctly.
On real hardware the traffic should validate actual VLAN filter
propagation.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260408115240.1636047-4-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This moves a few functions which can be useful to other python programs
that manipulate XDP programs. This also refactors xdp.py to use the
refactored functions.
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260325201139.2501937-6-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are transient failures for devices which update stats
periodically, especially if it's the FW DMA'ing the stats
rather than host periodic work querying the FW. Wait 25%
longer than strictly necessary.
For devices which don't report stats-block-usecs we retain
25 msec as the default wait time (0.025sec == 20,000usec * 1.25).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260318033819.1469350-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an env NetDrvContEnv for container based selftests. This automates
the setup of a netns, netkit pair with one inside the netns, and a BPF
program that forwards skbs from the NETIF host inside the container.
Currently only netkit is used, but other virtual netdevs e.g. veth can
be used too.
Expect netkit container datapath selftests to have a publicly routable
IP prefix to assign to netkit in a container, such that packets will
land on eth0. The BPF skb forward program will then forward such packets
from the host netns to the container netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260305181803.2912736-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Making rtnl newlink calls requires constants defined in Netlink class in
pyynl. Export it.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20260305181803.2912736-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Certain tests need a unique set of ports. Successive calls to the
existing rand_port method may return a duplicate port, resulting in test
flakiness. The new helper keeps sockets open while building a list of
ephemeral ports, thus the kernel enforces their uniqueness.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20260224224659.1507082-2-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 77b9c4a438fc66e2ab004c411056b3fb71a54f2c, reversing
changes made to 4515ec4ad58a37e70a9e1256c0b993958c9b7497:
931420a2fc36 ("selftests/net: Add netkit container tests")
ab771c938d9a ("selftests/net: Make NetDrvContEnv support queue leasing")
6be87fbb2776 ("selftests/net: Add env for container based tests")
61d99ce3dfc2 ("selftests/net: Add bpf skb forwarding program")
920da3634194 ("netkit: Add xsk support for af_xdp applications")
eef51113f8af ("netkit: Add netkit notifier to check for unregistering devices")
b5ef109d22d4 ("netkit: Implement rtnl_link_ops->alloc and ndo_queue_create")
b5c3fa4a0b16 ("netkit: Add single device mode for netkit")
0073d2fd679d ("xsk: Proxy pool management for leased queues")
1ecea95dd3b5 ("xsk: Extend xsk_rcv_check validation")
804bf334d08a ("net: Proxy netdev_queue_get_dma_dev for leased queues")
0caa9a8ddec3 ("net: Proxy net_mp_{open,close}_rxq for leased queues")
ff8889ff9107 ("net, ethtool: Disallow leased real rxqs to be resized")
9e2103f36110 ("net: Add lease info to queue-get response")
31127deddef4 ("net: Implement netdev_nl_queue_create_doit")
a5546e18f77c ("net: Add queue-create operation")
The series will conflict with io_uring work, and the code needs more
polish.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new parameter `lease` to NetDrvContEnv that sets up queue leasing
in the env.
The NETIF also has some ethtool parameters changed to support memory
provider tests. This is needed in NetDrvContEnv rather than individual
test cases since the cleanup to restore NETIF can't be done, until the
netns in the env is gone.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-16-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add an env NetDrvContEnv for container based selftests. This automates
the setup of a netns, netkit pair with one inside the netns, and a BPF
program that forwards skbs from the NETIF host inside the container.
Currently only netkit is used, but other virtual netdevs e.g. veth can
be used too.
Expect netkit container datapath selftests to have a publicly routable
IP prefix to assign to netkit in a container, such that packets will
land on eth0. The BPF skb forward program will then forward such packets
from the host netns to the container netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-15-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Run the test against HW GRO and LRO. NICs I have pass the base cases.
Interestingly all are happy to build GROs larger than 64k.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260113000740.255360-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PSP responder fails when zero or multiple PSP devices are detected.
There's an option to select the device id to use (-d) but it's
currently not used from the PSP self test. It's also hard to use because
the PSP test doesn't dump the PSP devices so can't choose one.
When zero devices are detected, psp_responder fails which will cause the
parent test to fail as well instead of skipping PSP tests.
Fix both of these problems. Change psp_responder to:
- not fail when no PSP devs are detected.
- get an optional -i ifindex argument instead of -d.
- select the correct PSP dev from the dump corresponding to ifindex or
- select the first PSP dev when -i is not given.
- fail when multiple devs are found and -i is not given.
- warn and continue when the requested ifindex is not found.
Also plumb the ifindex from the Python test.
With these, when there are no PSP devs found or the wrong one is chosen,
psp_responder opens the server socket, listens for control connections
normally, and leaves the skipping of the various test cases which
require a PSP device (~most, but not all of them) to the parent test.
This results in output like:
ok 1 psp.test_case # SKIP No PSP devices found
[...]
ok 12 psp.dev_get_device # SKIP No PSP devices found
ok 13 psp.dev_get_device_bad
ok 14 psp.dev_rotate # SKIP No PSP devices found
[...]
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Link: https://patch.msgid.link/20260109110851.2952906-2-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GenerateTraffic was added to spin up long-running iperf3 load, mainly
to drive high PPS background traffic. It was never meant to provide
stable throughput numbers, and trying to repurpose it for measurement
does not make sense.
Introduce Iperf3Runner to allow tests to split out server/client
configuration, control start/stop, and collect JSON output for
analysis. This makes it possible to measure bandwidth directly when
validating egress shaping.
GenerateTraffic stays as the background load generator, reusing the
common iperf3 helpers under the hood.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-3-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're already saving the info about the local dev in env.dev
for the tests, save remote dev as well. This is more symmetric,
env generally provides the same info for local and remote end.
While at it make sure that we reliably get the detailed info
about the local dev. nsim used to read the dev info without -d.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a lot of cases where we try to re-run the same code with
different parameters. We currently need to either use a generator
method or create a "main" case implementation which then gets called
by trivial case functions:
def _test(x, y, z):
...
def case_int():
_test(1, 2, 3)
def case_str():
_test('a', 'b', 'c')
Add support for variants, similar to kselftests_harness.h and
a lot of other frameworks. Variants can be added as decorator
to test functions:
@ksft_variants([(1, 2, 3), ('a', 'b', 'c')])
def case(x, y, z):
...
ksft_run() will auto-generate case names:
case.1_2_3
case.a_b_c
Because the names may not always be pretty (and to avoid forcing
classes to implement case-friendly __str__()) add a wrapper class
KsftNamedVariant which lets the user specify the name for the variant.
Note that ksft_run's args are still supported. ksft_run splices args
and variant params together.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251120021024.2944527-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert remaining __init__ files similar to what we did in
commit b615879dbfea ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linters are still not very happy with our __init__ files,
which was pointed out in recent review (see Link).
We have previously started importing things one by one to
make linters happy with the test files (which import from __init__).
But __init__ file itself still makes linters unhappy.
To clean it up I believe we must completely remove the wildcard
imports, and assign the imported modules to __all__.
hds.py needs to be fixed because it seems to be importing
the Python standard random from lib.net.
We can't use ksft_pr() / ktap_result() in case importing
from net.lib fails. Linters complain that those helpers
themselves may not have been imported.
Link: https://lore.kernel.org/9d215979-6c6d-4e9b-9cdd-39cff595866e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251003164748.860042-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests for making sure device can disappear while associations
exist. This is netdevsim-only since destroying real devices is
more tricky.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-9-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests for exercising PSP associations for TCP sockets.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-6-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Simple PSP test to getting info about PSP devices.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-3-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On fast machines the tests run in quick succession so even
when tests clean up after themselves the carrier may need
some time to come back.
Specifically in NIPA when ping.py runs right after netpoll_basic.py
the first ping command fails.
Since the context manager callbacks are now common NetDrvEpEnv
gets an ip link up call as well.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250812142054.750282-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make require_cmd() calls explicit about whether commands are needed
locally, remotely, or both.
Since require_cmd() defaults to local=True, tests should explicitly set
local=False when commands are only needed remotely.
- socat: Set local=False since it's only needed on remote hosts.
- iperf3: Use single call with both local=True and remote=True since
it's needed on both hosts.
This avoids unnecessary test failures when commands are missing locally
but available remotely where actually needed, and consolidates a
duplicate require_cmd() call into single call that checks both hosts.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Fixes: f1e68a1a4a40 ("selftests: drv-net: add require_XYZ() helpers for validating env")
Fixes: c76bab22e920 ("selftests: drv-net: rss_input_xfrm: Check test prerequisites before running")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250723135454.649342-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The require_cmd() method was checking for command availability locally
even when remote=True was specified, due to a missing host parameter.
Fix by passing host=self.remote when checking remote command
availability, ensuring commands are verified on the correct host.
Fixes: f1e68a1a4a40 ("selftests: drv-net: add require_XYZ() helpers for validating env")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250723135454.649342-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc8).
Conflicts:
drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion")
755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/icssg/icssg_prueth.h
6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few packets may still be sent out during the termination of iperf
processes. These late packets cause failures in rss_ctx.py when they
arrive on queues expected to be empty.
Example failure observed:
Check failed 2 != 0 traffic on inactive queues (context 1):
[0, 0, 1, 1, 386385, 397196, 0, 0, 0, 0, ...]
Check failed 4 != 0 traffic on inactive queues (context 2):
[0, 0, 0, 0, 2, 2, 247152, 253013, 0, 0, ...]
Check failed 2 != 0 traffic on inactive queues (context 3):
[0, 0, 0, 0, 0, 0, 1, 1, 282434, 283070, ...]
To avoid such failures, wait until all client sockets for the requested
port are either closed or in the TIME_WAIT state.
Fixes: 847aa551fa78 ("selftests: drv-net: rss_ctx: factor out send traffic and check")
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722122655.3194442-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bpftrace is very useful for low level driver testing. perf or trace-cmd
would also do for collecting data from tracepoints, but they require
much more post-processing.
Add a wrapper for running bpftrace and sanitizing its output.
bpftrace has JSON output, which is great, but it prints loose objects
and in a slightly inconvenient format. We have to read the objects
line by line, and while at it return them indexed by the map name.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-1-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bpf utility to simplify the use of bpftool for XDP tests included in
this series.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250710184351.63797-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
distribution
This test suite validates the functionality of the devlink-rate API for
traffic class (TC) bandwidth allocation. It ensures that bandwidth can
be distributed between different traffic classes as configured, and
verifies that explicit TC-to-queue mapping is required for the
allocation to be effective.
The first test (test_no_tc_mapping_bandwidth) is marked as expected
failure on mlx5, since the hardware automatically enforces traffic
class separation by dynamically moving queues to the correct TC
scheduler, even without explicit TC-to-queue mapping configuration.
Test output on mlx5:
1..2
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results without TC mapping:
# TC 3: 0.19 Gbits/sec
# TC 4: 0.76 Gbits/sec
# Total bandwidth: 0.95 Gbits/sec
# TC 3 percentage: 20.0%
# TC 4 percentage: 80.0%
ok 1 devlink_rate_tc_bw.test_no_tc_mapping_bandwidth # XFAIL Bandwidth matched 80/20 split without TC mapping
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results with TC mapping:
# TC 3: 0.21 Gbits/sec
# TC 4: 0.78 Gbits/sec
# Total bandwidth: 0.98 Gbits/sec
# TC 3 percentage: 21.1%
# TC 4 percentage: 78.9%
# Bandwidth is distributed as 80/20 with TC mapping
ok 2 devlink_rate_tc_bw.test_tc_mapping_bandwidth
# Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pylint doesn't understand our path hacks, and it generates a lot
of warnings for driver tests. Import what we use one by one, this
is hopefully not too tedious and it makes pylint happy.
Link: https://patch.msgid.link/20250621171944.2619249-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516225156.1122058-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Revert fbbf93556f0c ("selftests: nic_performance: Add selftest for performance of NIC driver")
Revert c087dc54394b ("selftests: nic_link_layer: Add selftest case for speed and duplex states")
Revert 6116075e18f7 ("selftests: nic_link_layer: Add link layer selftest for NIC driver")
These tests don't clean up after themselves, don't use the disruptive
annotations, don't get included in make install etc. etc. The tests
were added before we have any "HW" runner, so the issues were missed.
Our CI doesn't have any way of excluding broken tests, remove these
for now to stop the random pollution of results due to broken env.
We can always add them back once / if fixed.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250507140109.929801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The single letter + "path" helpers do not have many fans (see Link).
Use a Path object with a better name. test_dir is the replacement
for rpath(), net_lib_dir is a new path of the $ksft/net/lib directory.
The Path() class overloads the "/" operator and can be cast to string
automatically, so to get a path to a file tests can do:
path = env.test_dir / "binary"
Link: https://lore.kernel.org/CA+FuTSemTNVZ5MxXkq8T9P=DYm=nSXcJnL7CJBPZNAT_9UFisQ@mail.gmail.com
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250327222315.1098596-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests to check that the napi retained the IRQ after down/up,
multiple changes in the number of rx queues and after
attaching/releasing XDP program.
Tested on ice and idpf:
# NETIF=<iface> tools/testing/selftests/drivers/net/hw/irq.py
KTAP version 1
1..4
ok 1 irq.check_irqs_reported
ok 2 irq.check_reconfig_queues
ok 3 irq.check_reconfig_xdp
ok 4 irq.check_down
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Tested-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-7-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Looks like more and more tests want to iterate over IP version,
run the same test over ipv4 and ipv6. The current naming of
members in the env class makes it a bit awkward, we have
separate members for ipv4 and ipv6 parameters.
Store the parameters inside dicts, so that tests can easily
index them with ip version.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We already record output of ip link for NETIF in env for easy access.
Record the detailed version. TSO test will want to know the max tso size.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250218225426.77726-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Find out and record in env the name of the interface which remote host
will use for the IP address provided via config.
Interface name is useful for mausezahn and for setting up tunnels.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250218225426.77726-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refering to C binaries from Python code is going to be a common
need. Add a helper to convert from path in relation to the test.
Meaning, if the test is in the same directory as the binary, the
call would be simply: cfg.rpath("binary").
The helper name "rpath" is not great. I can't think of a better
name that would be accurate yet concise.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250207184140.1730466-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
