| Age | Commit message (Collapse) | Author |
|---|
|
DSP0283 v1.1.0 will introduce larger maximum packet sizes. In
preparation, indicate that the current maxima are specific to v1.0.x.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260724-dev-mctp-usb-1-1-v5-1-e66bbba0dbdc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing struct member, function parameters, and function return
values to eliminate all kernel-doc warnings:
Warning: include/linux/nd.h:124 struct member 'common' not described in 'nd_namespace_io'
Warning: include/linux/nd.h:124 Excess struct member 'dev' description in 'nd_namespace_io'
Warning: include/linux/nd.h:166 function parameter 'flags' not described in 'nvdimm_read_bytes'
Warning: include/linux/nd.h:166 No description found for return value of 'nvdimm_read_bytes'
Warning: include/linux/nd.h:185 function parameter 'flags' not described in 'nvdimm_write_bytes'
Warning: include/linux/nd.h:185 No description found for return value of 'nvdimm_write_bytes'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260721172132.3718892-1-rdunlap@infradead.org
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Several bug fixes found by tools and fuzzing:
- Incorrect domain passed during replace to ack faults
- Block the access API from using dmabuf
- Missing unlock on error unwind
- Race seeing a partially setup vdevice in the xarray
- Do not allow vdevices to have multiple stream ids in SMMUv3
- Possible UAF if racing faults with domain changes"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/iommufd: Fix IOPF group ownership UAF
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
iommufd/viommu: Publish a vDEVICE only after vdevice_init() succeeds
iommufd/viommu: Release the igroup lock on the vdevice_size error path
iommufd: Reject DMABUF pages from the access pin path
iommufd: Fix wrong hwpt passed to iommufd_auto_response_faults on replace
|
|
Most modern Qualcomm platforms (>= SM8150) expose information about the
DDR memory present on the system via SMEM.
Details from this information is used in various scenarios, such as
multimedia drivers configuring the hardware based on the "Highest Bank
address Bit" (hbb), or the list of valid frequencies in validation
scenarios...
Add support for parsing v3-v7 version of the structs. Unforunately,
they are not versioned, so some elbow grease is necessary to determine
which one is present. See for reference:
ver 3: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/1d11897d2cfcc7b85f28ff74c445018dbbecac7a
ver 4: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/f6e9aa549260bbc0bdcb156c2b05f48dc5963203
ver 5: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/617d3297abe8b1b8dd3de3d1dd69c3961e6f343f
ver 5 with 6regions: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/d770e009f9bae58d56d926f7490bbfb45af8341f
ver 6: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/62659b557fdb1551b20fae8073d1d701dfa8a62e
ver 7: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/734d95599c5ebb1ca0d4e1639142e65c590532b7
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/1d11897d2cfcc7b85f28ff74c445018dbbecac7a
Link: https://lore.kernel.org/r/20260727-topic-smem_dramc-v5-2-66188b3e338d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The hardcoded MAX_GENI_CFG_RAMn_CNT limit is not accurate for all SoCs:
some targets have less CFG RAM than the constant implies, while others
like QCS615 need more entries than the old limit of 455 allowed, causing
valid firmware to be rejected at load time.
Rather than hardcoding a constant, read PROG_RAM_DEPTH from SE_HW_PARAM_2
at runtime to get the actual CFG RAM depth of the hardware instance and
use that as the upper bound for firmware size validation.
Fixes: d4bf06592ad6 ("soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260702-qup-se-increase-ram-cnt-v3-1-80b363373a5b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc6).
No conflicts.
Adjacent changes:
net/ipv4/route.c
dbc3791e3b24 ("net: do not send ICMP/NDISC Redirects when peer allocation fails")
7804eaa057fe ("ipv4: snapshot dst.dev in ip_rt_send_redirect() and ip_rt_get_source()")
drivers/net/tun.c
23dad2d088df ("tun: no longer rely on RTNL in tun_fill_info()")
c3da92af07ea ("Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"")
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
3bd438a58e91 ("octeontx2-af: Block VFs from clobbering special CGX PKIND state")
5ba5611ef946 ("octeontx2-af: reserve 4 PKINDs for skip-size custom use")
drivers/net/wireless/ath/ath12k/core.h
drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/peer.c
469d7e6077c1 ("wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event")
378e659029d5 ("wifi: ath12k: introduce host_alloc_ml_id hardware parameter")
c42b27336eef ("wifi: ath12k: fix survey indexing across bands")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again larger than usual: the backlog accumulated in the past weeks
is not done yet. I'm not aware of any known pending regression.
Including fixes from netfilter, Bluetooth, WiFi and CAN.
Current release - regressions:
- bluetooth: remove unnecessary hci_conn_get in create_conn_sync
- can: isotp: fix timer drain order, wakeup handling and tx_gen
ordering
- eth:
- tun/vhost: revert avoid ptr_ring tail-drop when a qdisc is
present
Previous releases - regressions:
- core: do not send ICMP/NDISC Redirects when peer allocation fails
- ipv6: take nexthop lock for f6i_list walks in replace check and
notify
- wifi: fix an ath12k MLO regression impacting WCN7850/QCC2072.
- netfilter: nf_tables: make nft_object rhltable per table
- af_unix: fix listen() succeeding on sockets in the wrong state
- openvswitch: fix potential UAF on meter attach failure
- bluetooth:
- fix advertising data UAFs
- avoid deadlocks in iso_sock_timeout
- smc: fix socket use-after-free during link group termination
- dpll: use pin owner's dpll ref for pin-level attribute reporting
- eth:
- veth: convert frag_list skbs before running XDP
- ice: wait for reset completion in ice_resume()
- igc: remove napi_synchronize() in igc_down()
- vxlan: use pskb_network_may_pull() for transmit path header pulls
Previous releases - always broken:
- xsk: fix AF_XDP multi-buffer Tx descriptor reclaim
- psp: fix NULL genl_sock deref race with concurrent netns teardown
- netfilter: widen NAT rewrite delta to s32 in sip_help_tcp()
- can: peak_usb: fix double free of transfer buffer on URB submit error
- dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
- sctp: prevent peer transport count overflow
- dsa: mt7530: error out on failed reads in MT7531 PHY polling
- eth:
- idpf: bound interrupt-vector register fill to the allocated array"
* tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (156 commits)
qede: sync udp_tunnel ports outside qede_lock in the recovery path
net: openvswitch: fix potential UAF on meter attach failure
octeontx2-pf: Set correct sequence for carrier off and tx queue stop
net: libwx: fix FDIR ATR queue mismatch for software VLAN packets
net: dsa: realtek: use devm_mutex_init for l2_lock
net: dsa: realtek: use devm_mutex_init for vlan_lock
net: dsa: realtek: use devm_mutex_init for regmap lock
net: dsa: realtek: rtl8365mb: use devm_mutex_init for mib_lock
ptp: netc: fix potential interrupt storm caused by incorrect unbind order
net: mana: Return error code from mana_create_rxq()
net: openvswitch: fix skb leak on flow key update failure during ct
net: openvswitch: fix skb leak on flow key update failure during recirculation
net: stmmac: Fix E2E delay mechanism
net: dsa: mt7530: error out on failed reads in MT7531 PHY polling
net: dsa: mt7530: error out on failed reads in ATC/VTCR command polling
net: dsa: mt7530: check bus->read() errors in the MDIO regmap backend
Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"
Revert "vhost-net: wake queue of tun/tap after ptr_ring consume"
Revert "ptr_ring: move free-space check into separate helper"
Revert "tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"
...
|
|
Implement the necessary callbacks to switch the 8250 console driver
to perform as an nbcon console.
Add implementations for the nbcon console callbacks:
->write_atomic()
->write_thread()
->device_lock()
->device_unlock()
and add CON_NBCON to the initial @flags.
All hardware access in the callbacks is within unsafe sections.
The ->write_atomic() and ->write_thread() callbacks allow safe
handover/takeover per byte and add a preceding newline if they
take over from another context mid-line.
For the ->write_atomic() callback, a new irq_work is used to defer
modem control since it may be called from a context that does not
allow waking up tasks. During suspend/resume the irq_work is not
used as this has been shown to cause suspend problems for some
hardware. Upon resume, any pending modem control is performed.
Note: A new __serial8250_clear_IER() is introduced for direct
clearing of UART_IER during console writing (which will not be
holding the port lock for atomic printing or KDB/KGDB). This
allows restoring a lockdep check to serial8250_clear_IER() in
a follow-up commit.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://patch.msgid.link/20260729120439.281252-2-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the four undocumented struct members in
struct fwnode_operations: device_dma_supported, device_get_dma_attr,
iomap, and irq_get.
This avoids kernel-doc warnings once include/linux/fwnode.h is included
in the driver-api infrastructure documentation.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260727202748.2232253-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Define a static software node for the UCB1x00 GPIO controller and attach
it to the core MFD device in ucb1x00_probe(). This node will also be
used by the created GPIO chip.
This allows machine subdrivers (such as Assabet evaluation board
support) to reference the UCB1x00 GPIO controller in property entries
when converting legacy platform data to software nodes, resolving pin
bindings directly via the attached firmware node without relying on
name matching.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-ucb1x00-assabet-swnode-v2-1-e6271ea3d3dc@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Move the DBx500 PRCMU definitions into the DB8500 PRCMU
header and delete the wrapper header.
Convert users of simple PRCMU wrappers to call the DB8500 helpers
directly.
The dbx500-prcmu.h header was the result of an earlier attempt to
abstract several DBx5x SoC PRCMU units to use the same abstract
header. They are deleted from the kernel and this is not just
causing maintenance burden and build errors.
The stub code is using -ENOSYS in a way checkpatch complains about
so replace these with -EINVAL while we're at it.
Assisted-by: Codex:gpt-5-5
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606180825.vUSQntkJ-lkp@intel.com/
Signed-off-by: Linus Walleij <linusw@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/oe-kbuild-all/202606180825.vUSQntkJ-lkp@intel.com/
Link: https://patch.msgid.link/20260619-mfd-prcmu-merge-headers-v1-1-8ea0ee23b4d6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Initialize the PMIC's battery page. The battery page registers are
shared between Vbus regulator, charger, fuelgauge and camera flash
blocks, hence the commonization of the page.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Reviewed-by: Karel Balej <balejk@matfyz.cz>
Link: https://patch.msgid.link/20260613-88pm886-vbus-v2-2-021dfb02c6bb@dujemihanovic.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608102714.2503120-4-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The SI476X driver depends on the legacy GPIO API. As it only
really use a single GPIO for reset, and this can be easily converted
to use a GPIO descriptor, modernize the driver.
The "reset" GPIO is obtained from a device property, such as a
device tree ("reset-gpios", which is standard, but this hardware has
no DT bindings as of now) or a software node for static platforms.
Out-of-tree users can easily adopt to providing a GPIO descriptor
this way.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608-mfd-si476x-v2-1-da5f779c1888@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
netpoll_wait_carrier() waits for the egress device carrier during
netconsole setup. Its only caller, netcons_netpoll_setup(), already
lives in netconsole. Move the function into drivers/net/netconsole.c,
drop EXPORT_SYMBOL_GPL() and remove the prototype from <linux/netpoll.h>.
Rename it to netcons_wait_carrier() for the netcons_ prefix. It now reads
the timeout through netpoll_get_carrier_timeout(), since carrier_timeout
stays in netpoll to keep the netpoll.carrier_timeout parameter.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20260724-netconsole_move_more_final-v1-9-a5f7691db81c@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With netpoll_setup() and the packet-building path now living in
netconsole, local_ip, remote_ip and ipv6 in struct netpoll are read
and written only by netconsole. No other netpoll user touches them.
Move the three fields into netconsole_target and switch the packet
builders and setup helpers to take the target instead of the netpoll
handle. struct netpoll is left holding only the device-binding state
that the shared netpoll transport needs.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20260724-netconsole_move_more_final-v1-8-a5f7691db81c@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
move egress_dev() from netpoll to netconsole, and append netcons_
prefix.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20260724-netconsole_move_more_final-v1-7-a5f7691db81c@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move netpoll_take_ipv6() to netconsole, and add netcons_ prefix.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20260724-netconsole_move_more_final-v1-6-a5f7691db81c@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move netpoll_take_ipv4() to netconsole, which is the only user. Rename
it to netcons_take_ipv4() for the netcons_ prefix. The body is
unchanged.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20260724-netconsole_move_more_final-v1-5-a5f7691db81c@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move netpoll_local_ip_unset() from netpoll to netconsole and rename it
to netcons_local_ip_unset();
The body is otherwise unchanged, only the comment's setup-function
reference is updated.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20260724-netconsole_move_more_final-v1-4-a5f7691db81c@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
netpoll_setup() is only used by netconsole. All the other users use
__netpoll_setup().
Move netpoll_setup() to netconsole, and rename it to
netcons_netpoll_setup().
Pure code motion: the body is unchanged.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20260724-netconsole_move_more_final-v1-3-a5f7691db81c@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Temporarily export leaf functions that will be moved to netconsole.
The upcoming patch will move the setup function to netconsole, and
continue to call these leaf functions here in netpoll, then other
patches will move these exports functions to netconsole (and make them
statics).
In summary, these exports are temporary in order to make the patchset
digestible.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20260724-netconsole_move_more_final-v1-2-a5f7691db81c@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
netpoll_wait_carrier() is only used in netconsole, and it will move to
netconsole.
The carrier_timeout module parameter has to stay in netpoll so the
existing netpoll.carrier_timeout kernel parameter keeps working for
current users, and we don't break user compatibility.
Add a netpoll_get_carrier_timeout() accessor and export it so netconsole
can read the value once the carrier wait lives there. Drop the now
redundant timeout argument from netpoll_wait_carrier() (its only caller
passed carrier_timeout) and read the parameter directly while the helper
still lives here.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20260724-netconsole_move_more_final-v1-1-a5f7691db81c@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add gpio_regmap_enable_irq() and gpio_regmap_disable_irq(). Since struct
gpio_regmap is opaque, drivers cannot access the embedded gpio_chip directly.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-9-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add a new set_config callback to allow drivers to implement
hardware-specific configuration such as debounce settings, or other
platform-specific GPIO properties.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-8-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Introduce a new optional 'value_xlate' callback. This routine allows drivers
to translate or modify the register value and mask immediately before a write
operation. It is particularly useful for hardware that requires additional
control bits, such as a write-enable bit, to be appended to the data
dynamically.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Suggested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-7-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Extend the reg_mask_xlate callback with an operation type parameter
(enum gpio_regmap_operation) to allow drivers to return different
register/mask combinations depending on the specific GPIO operation.
Consequently, update all existing drivers utilizing the gpio-regmap
framework (across drivers/gpio, drivers/iio, and drivers/pinctrl)
to accommodate the new reg_mask_xlate function signature.
Acked-by: William Breathitt Gray <wbg@kernel.org>
Acked-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com> #for-iio
Suggested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-6-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Order kernel-doc descriptions with the actual appearance.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-5-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
When GPIO regmap based driver supplies its own IRQ domain, it might
still want to keep track of the IRQ requests and releases, in particular
to prevent a GPIO, which is used and locked as IRQ, to be requested
via standard ways. Provide default callbacks for such cases and keep
struct gpio_chip private to GPIO regmap implementation.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-3-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm into kho-scratch
|
|
read/write
MHI EP stack makes use of the MHI controller drivers like MHI EPF to do
read/write to the host memory. And that driver is free to use mechanisms
like DMA to offload the read/write operations.
So if DMA is used for offload, then there is no guarantee that those DMA
operations would be completed by the time mhi_ep_remove() gets called. This
can lead to UAF (Use-After-Free) issues as the DMA callback can trigger
xfer_cb() even after mhi_ep_remove() has returned.
So to fix this issue, introduce the mhi_cntrl->flush_async() callback and
call it in mhi_ep_remove() to drain all the in-flight async transfers
before disconnecting the channels.
The completion handlers keep triggering xfer_cb() as long as it is set. So
flushing the transfers after notifying the client about the disconnect
(-ENOTCONN) would still let a success callback slip through afterwards and
lead to the same UAF. So disable the channels first to prevent new
transfers, then flush the in-flight transfers so that their completions are
delivered while xfer_cb() is still valid and only then notify the
disconnect and clear xfer_cb().
Fixes: 2547beb00ddb ("bus: mhi: ep: Add support for async DMA read operation")
Fixes: ee08acb58fe4 ("bus: mhi: ep: Add support for async DMA write operation")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable+noautosel@kernel.org # Needs dmaengine driver fix as well
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
|
|
Clean up some kernel-doc comments and warnings:
- use correct format for struct members
- add one struct member description
- add one function parameter description
- mark one enum as private
- add a leading '*' on one kernel-doc line
Fixes these warnings:
Warning: include/linux/mhi.h:108 struct member 'target_link_speed' not
described in 'mhi_link_info'
Warning: include/linux/mhi.h:108 struct member 'target_link_width' not
described in 'mhi_link_info'
Warning: ../include/linux/mhi.h:159 Enum value 'MHI_STATE_MAX' not
described in enum 'mhi_state'
Warning: ../include/linux/mhi.h:212 bad line: for UL channels, multiple
of 8 ring elements for DL channels
Warning: ../include/linux/mhi.h:236 struct member 'wake_capable' not
described in 'mhi_channel_config'
Warning: ../include/linux/mhi.h:449 struct member 'M0' not described
in 'mhi_controller'
Warning: ../include/linux/mhi.h:449 struct member 'M2' not described
in 'mhi_controller'
Warning: ../include/linux/mhi.h:449 struct member 'M3' not described
in 'mhi_controller'
Warning: ../include/linux/mhi.h:528 struct member 'id_table' not described
in 'mhi_driver'
Warning: ../include/linux/mhi.h:543 function parameter 'mhi_cntrl' not
described in 'mhi_free_controller'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
|
|
MHI bus transitions the device into M3 state during suspend and back to M0
state during resume. But due to hardware issues, some devices do not
support M3 state. To support these devices properly, MHI bus needs to skip
transitioning the device to M3 during suspend and back to M0 during resume.
For this purpose, introduce the 'mhi_cntrl->no_m3' flag and allow it to be
set by the MHI controller drivers. Once set, this flag lets the MHI bus
skip transitioning the device to M3/M0 during suspend/resume.
But, simply skipping suspend/resume for such devices is not sufficient, as
it leaves the MHI host in M0 state with device access enabled. Client
drivers that do not implement PM callbacks (for instance, the non-freezable
rx_refill worker in mhi_net driver) could then keep ringing channel
doorbells and issue MMIO to the device even after the controller driver has
disabled it and moved it to D3 during its own suspend, resulting in access
to a powered down device.
So instead of skipping the entire suspend/resume operation, run the full
host suspend/resume sequence but without the device-side M state handshake.
During suspend, only transition the host to M3 without sending the MHICTRL
M3 command or waiting for the device M3 event. During resume, bring the
host back to M0 through mhi_pm_m0_transition() without sending the MHICTRL
M0 command.
With the host in M3, all device access is gated by MHI_DB_ACCESS_VALID()
and MHI_REG_ACCESS_VALID(), so any transfer queued by the clients during
suspend is deferred until resume, where mhi_pm_m0_transition() rings the
pending doorbells.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
|
|
Commit 6deb53595092 ("net: remove unused ATM protocols and legacy
ATM device drivers") removed the remaining in-tree users of
atm_alloc_charge(), atm_pcr_goal(), sonet_copy_stats() and
sonet_subtract_stats().
Remove these unused exported helpers and their declarations. The
removal of the SONET statistics helpers also leaves
include/linux/sonet.h without users, so remove the internal header and
its MAINTAINERS entry.
Signed-off-by: Xiang-Bin Shi <eric91102091@gmail.com>
Link: https://patch.msgid.link/20260727054538.196437-1-eric91102091@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit baf808fe4fcd35767ab732b4ab2ea80dabfd97a6.
There is no netdev queue left to wake after reverting
commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-4-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit fba362c17d9d9211fc51f272156bb84fc23bdf98.
__ptr_ring_check_produce() has no users left after reverting
commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-3-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Diagnosing GENI SE-based driver (serial, SPI, I2C) failures currently
requires reading each hardware register individually, either through
ad hoc debug code or a debugger. This is slow, requires the state to
remain stable across the multiple reads, and cannot be run
non-intrusively during normal operation without adding printk-style
noise to each driver.
Add a new trace event header for the Qualcomm GENI Serial Engine (SE)
framework providing a geni_se_regs tracepoint. This tracepoint
captures a comprehensive snapshot of the GENI SE hardware state in a
single trace record, making it possible to correlate register values at
a precise point in time without multiple sequential reads.
The trace event records the following register groups:
- Main/secondary command and IRQ status (M_CMD0, S_CMD0, M/S_IRQ_STATUS)
- Engine status, IOS, and command control/error registers
- TX/RX FIFO status and watermark registers (including RFR watermark)
- M/S GP length registers
- DMA TX/RX IRQ, enable, length, pointer, attribute, and burst registers
- DMA interface enable, general config, QSB trans config, and debug
- M/S IRQ enable, GSI event enable, and top-level SE IRQ enable
- Serial master/slave clock config, general config, output control,
clock control RO, FIFO interface disable, and FW multilock MSA
- Clock select register
Having all these registers captured atomically in a single ftrace record
allows drivers built on top of the GENI SE framework (serial, SPI, I2C)
to invoke this tracepoint on error paths and reconstruct the full engine
state during post-mortem analysis without instrumenting each driver
separately.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729-add-tracepoints-for-se-reg-dump-v4-1-08bbd63b0ed2@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
An I2C bus can make use of shared resources. E.g. two GPIO based buses
that share a single SCL line. To synchronize access to the bus the driver
might use locking with the help of i2c_lock_operations(). While this
works for normal transfers it is not available during initialization.
Especially if i2c-algo-bit module is loaded with parameter bit_test
it will issue some basic sanity checks that will access the bus without
locking. This might interfere badly with concurrent transfers. Even
if these are well synchronized via locks.
Allow the consumer of an algorithm to override if the bit_test is allowed
or not. For this add a new boolean attribute named skip_bit_test to
i2c_algo_bit_data. If set the test is not run.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260714162915.3018703-2-markus.stockhausen@gmx.de
|
|
Let's clean it up a bit:
(1) There is no need to pass "full" anymore.
(2) No architecture overwrites it, and there isn't really a good reason
to do so when dealing with non-present PTEs.
(3) While at it, call it "non-present", similar to copy_nonpresent_pte()
and zap_nonpresent_ptes().
It's a shame that we have clear_non_present_ptes() correspond to
pte_clear() and clear_ptes() correspond to ptep_get_and_clear*().
Link: https://lore.kernel.org/20260629-clear_not_present_full_ptes-v2-3-96089871a1e7@kernel.org
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Oscar Salvador (SUSE) <osalvador@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In general, there is no good reason to do anything special when clearing
non-present PTEs.
In theory, HW that does have to invalidate TLBs for non-present PTEs could
benefit from a "full" parameter, but fortunately
pte_clear_not_present_full() is not wired up anymore ... and there would
have to be something very convincing for us to care about that to re-add
it.
So, let's just use pte_clear() directly now. To prevent the compiler
complaining on some configs about "set but not used" addr parameter,
silence that here.
Link: https://lore.kernel.org/20260629-clear_not_present_full_ptes-v2-2-96089871a1e7@kernel.org
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Oscar Salvador (SUSE) <osalvador@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The nodemasks in these structures may come from a variety of sources,
including tasks and cpusets - and should never be modified by any code
when being passed around inside another context.
Link: https://lore.kernel.org/20260609002919.3967782-1-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Tested-by: SeongJae Park <sj@kernel.org>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baoquan He <baoquan.he@linux.dev>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This removed unused leftovers, most of them are forward structure
declarations. Also removes SWAP_BATCH macro which isn't used any where in
the code.
Found these during manual code review.
Link: https://lore.kernel.org/68591daf0d679e5a0072d63751f187d14613e2b0.1781146877.git.ritesh.list@gmail.com
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Baoquan He <baoquan.he@linux.dev>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Correct some kernel-doc issues in radix-tree.h:
- use "DOC:" so that a kernel-doc comment is parsed correctly
(or we could just use "/*" for that comment)
- add one function parameter description
- add one function parameter name inside the prototype
to fix these warnings:
Warning: include/linux/radix-tree.h:164 Incorrect use of kernel-doc format:
* radix_tree_deref_slot - dereference a slot
Warning: include/linux/radix-tree.h:177 cannot understand function
prototype: '* @slot: slot pointer, returned by radix_tree_lookup_slot
Warning: include/linux/radix-tree.h:192 function parameter 'treelock'
not described in 'radix_tree_deref_slot_protected'
Warning: include/linux/radix-tree.h:309 function parameter '' not
described in 'radix_tree_next_chunk'
Link: https://lore.kernel.org/20260627185859.1632928-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
hugetlb_vmemmap_init_late() no longer has any users, so the remaining
late-init path in sparse_vmemmap_init_nid_late() is dead code.
Remove sparse_vmemmap_init_nid_late() and its declarations.
Link: https://lore.kernel.org/20260612035903.2468601-18-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Oscar Salvador (SUSE) <osalvador@kernel.org>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Usama Arif <usama.arif@linux.dev>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Bootmem gigantic HugeTLB pages used to be validated again during
gather_bootmem_prealloc_node() and any cross-zone pages were discarded
there.
That validation is no longer needed. Cross-zone bootmem gigantic pages
are now detected during allocation and freed before they reach the later
bootmem gathering path, so the remaining pages are already zone-valid.
Remove the obsolete cross-zone validation, invalid-page freeing, and the
associated discarded-page accounting.
Link: https://lore.kernel.org/20260612035903.2468601-17-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Oscar Salvador (SUSE) <osalvador@kernel.org>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Usama Arif <usama.arif@linux.dev>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The early boot gigantic hugepage allocation helpers currently mix
allocation with huge_bootmem_page setup, and leave part of the
initialization flow in architecture code.
Refactor the interface to return the allocated huge page pointer and move
the huge_bootmem_page setup into the generic hugetlb code. This makes the
architecture-specific paths focus only on finding memory, while the common
code handles node placement and early page metadata setup in one place.
This also lets powerpc benefit from memblock_reserved_mark_noinit(), which
it did not enable before.
In addition, upcoming cross-zone validation for boot-time gigantic hugetlb
reservation is common logic. With this refactoring, that logic can stay
in the generic code instead of being duplicated in architecture-specific
paths.
Link: https://lore.kernel.org/20260612035903.2468601-14-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Oscar Salvador (SUSE) <osalvador@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador (SUSE) <osalvador@kernel.org>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Usama Arif <usama.arif@linux.dev>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Gigantic bootmem HugeTLB pages are currently initialized from
hugetlb_init(), but page_alloc_init_late() runs earlier and walks
pageblocks to determine zone contiguity.
If a bootmem HugeTLB region is marked noinit, set_zone_contiguous() can
observe still-uninitialized struct pages through
__pageblock_pfn_to_page(). This may not trigger an immediate failure, but
it can make set_zone_contiguous() compute the wrong zone contiguity state.
If extra poisoned-page checks are added in this path, such as
PF_POISONED_CHECK() in page_zone_id(), it can also trigger an early boot
panic.
Initialize gigantic bootmem HugeTLB struct pages from
page_alloc_init_late(), before zone contiguity is evaluated, so later page
allocator setup only sees valid struct page state. This also makes the
initialization order more natural, as struct pages should be initialized
before later code inspects them.
Link: https://lore.kernel.org/20260612035903.2468601-5-songmuchun@bytedance.com
Fixes: fde1c4ecf916 ("mm: hugetlb: skip initialization of gigantic tail struct pages if freed by HVO")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador (SUSE) <osalvador@kernel.org>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Usama Arif <usama.arif@linux.dev>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Tejun changd percpu_ref to use long instead of int back in 2014 but missed
updating this bit of the documentation. Also add the documentation to the
htmldocs.
Link: https://lore.kernel.org/20241211204017.184512-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
initializtion -> initialization (missing "a")
Link: https://lore.kernel.org/20260615162244.2170866-2-willy@infradead.org
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add an unsigned long migrate_info member to the struct folio union and use
it to store migration state (anon_vma pointer and FOLIO_WAS_* markers)
instead of using folio->private. While at it, switch to bitwise OR.
No functional change.
[rdunlap@infradead.org: add missing kernel-doc for @migrate_info]
Link: https://lore.kernel.org/20260717022146.1290242-1-rdunlap@infradead.org
Link: https://lore.kernel.org/20260701-migrate-cleanups-prep-v2-3-d9e8f17130b1@amd.com
Signed-off-by: Shivank Garg <shivankg@amd.com>
Suggested-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: SJ Park <sj@kernel.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
