| Age | Commit message (Collapse) | Author |
|---|
|
Currently, the PCI resource files (resourceN, resourceN_wc) are dynamically
created by pci_create_sysfs_dev_files(), called from both
pci_bus_add_device() and the pci_sysfs_init() late_initcall, with only a
sysfs_initialized flag for synchronisation. This has caused warnings and
boot panics when both paths race on the same device, e.g.:
sysfs: cannot create duplicate filename '/devices/pci0000:3c/0000:3c:01.0/0000:3e:00.2/resource2'
This is especially likely on Devicetree-based platforms, where the PCI host
controllers are platform drivers that probe via the driver model, which can
happen during or after the late_initcall. As such, pci_bus_add_device()
and pci_sysfs_init() are more likely to overlap.
Convert to static const attributes with three attribute groups (I/O, UC,
WC), each with an .is_bin_visible() callback that checks resource flags,
BAR length, and non_mappable_bars. A .bin_size() callback provides
pci_resource_len() to the kernfs node for correct stat and lseek behaviour.
As part of this conversion:
- Rename pci_read_resource_io() and pci_write_resource_io() to
pci_read_resource() and pci_write_resource() since the callbacks are no
longer I/O-specific in the static attribute context.
- Update __resource_resize_store() to use sysfs_create_groups() and
sysfs_remove_groups(), which re-evaluates visibility and runs the
.bin_size() callback for the static resource attribute groups.
- Remove pci_create_resource_files(), pci_remove_resource_files(), and
pci_create_attr() which are no longer needed.
- Move the __weak stubs outside the #if guard so they remain available
for callers converted in subsequent commits.
Platforms that do not define the HAVE_PCI_MMAP macro or the
ARCH_GENERIC_PCI_MMAP_RESOURCE macro, such as Alpha architecture,
continue using their platform-specific resource file creation.
For reference, the dynamic creation dates back to the pre-Git era:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/drivers/pci/pci-sysfs.c?id=42298be0eeb5ae98453b3374c36161b05a46c5dc
The write-combine support was added in commit 45aec1ae72fc ("x86: PAT
export resource_wc in pci sysfs").
Many other reports mentioned in the cover letter (first Link: below).
Link: https://lore.kernel.org/r/20260508043543.217179-1-kwilczynski@kernel.org/
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215515
Closes: https://github.com/openwrt/openwrt/issues/17143
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-8-kwilczynski@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "khugepaged: add mTHP collapse support" (Nico Pache)
Provide khugepaged with the capability to collapse anonymous memory
regions to mTHPs
- "Remove CONFIG_READ_ONLY_THP_FOR_FS and enable file THP for writable
files" (Zi Yan)
Remove the READ_ONLY_THP_FOR_FS check in file_thp_enabled(), so that
khugepaged and MADV_COLLAPSE can run on filesystems with PMD THP
pagecache support even without READ_ONLY_THP_FOR_FS enabled
- "make MM selftests more CI friendly" (Mike Rapoport)
General fixes and cleanups to the MM selftests. Also move more MM
selftests under the kselftest framework, making them more amenable to
ongoing CI testing
- "selftests/mm: fix failures and robustness improvements" and
"selftests/mm: assorted fixes for hmm-tests" (Sayali Patil)
Fix several issues in MM selftests which were revealed by powerpc 64k
pagesize
* tag 'mm-stable-2026-06-23-08-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (118 commits)
Revert "mm: limit filemap_fault readahead to VMA boundaries"
mm/vmscan: pass NULL to trace vmscan node reclaim
mm: use mapping_mapped to simplify the code
selftests/mm: fix exclusive_cow test fork() handling
selftests/mm: remove hardcoded THP sizing assumptions in hmm tests
selftests/mm: allow PUD-level entries in compound testcase of hmm tests
mm/gup_test: reject wrapped user ranges
mm/page_frag: reject invalid CPUs in page_frag_test
mm/damon/core: always put unsuccessfully committed target pids
mm: page_isolation: avoid unsafe folio reads while scanning compound pages
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
selftests: mm: fix and speedup "droppable" test
mm: merge writeout into pageout
MAINTAINERS: add Hao Ge as reviewer for codetag and alloc_tag
selftests/mm: clarify alternate unmapping in compaction_test
selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category
selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero
selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported
selftests/mm: ensure destination is hugetlb-backed in hugetlb-mremap
selftest/mm: register existing mapping with userfaultfd in hugetlb-mremap
...
|
|
pci_sriov_resource_alignment() inputs struct pci_dev which it should not
need to alter to calculate alignment.
Make pci_dev pci_sriov_resource_alignment() inputs const. It requires
making pci_iov_resource_size() input const as well.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-8-ilpo.jarvinen@linux.intel.com
|
|
resource_alignment() does not need to change resource so it can be made
const.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-6-ilpo.jarvinen@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Core:
- add debugfs support for used channels
- fix resource leak on startup failure
- propagate tx error codes
- clarify blocking mode thread support
Drivers:
- exynos: remove unused register definitions
- imx: refactor IRQ handlers, migrate to devm helpers, and other
minor improvements
- mpfs: fix syscon presence check in inbox ISR
- mtk-adsp: fix use-after-free during device teardown
- qcom: add dt-bindings for QCOM Maili, Hawi, Shikra APCS, and Nord
CPUCP platform support"
* tag 'mailbox-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (23 commits)
mailbox: imx: Don't force-thread the primary handler
mailbox: imx: Move the RXDB part of the mailbox into the threaded handler
mailbox: imx: Move the RX part of the mailbox into the threaded handler
mailbox: imx: Start splitting the IRQ handler in primary and threaded handler
mailbox: imx: Use channel index instead of zero in imx_mu_specific_rx()
mailbox: imx: use devm_of_platform_populate()
mailbox: imx: Use devm_pm_runtime_enable()
mailbox: imx: Add a channel shutdown field
mailbox: imx: Forward the timeout/ error in imx_mu_generic_tx()
dt-bindings: mailbox: qcom: Add IPCC support for Maili Platform
mailbox: add list of used channels to debugfs
mailbox: don't free the channel if the startup callback failed
mailbox: Make mbox_send_message() return error code when tx fails
mailbox: Clarify multi-thread is not supported in blocking mode
mailbox: mtk-adsp: fix UAF during device teardown
mailbox: qcom: Unify user-visible "Qualcomm" name
mailbox: exynos: Drop unused register definitions
dt-bindings: mailbox: qcom: Add IPCC support for Hawi Platform
dt-bindings: mailbox: qcom,cpucp-mbox: Add Hawi compatible
dt-bindings: mailbox: qcom: Add Shikra APCS compatible
...
|
|
As SoundWire devices tend to enumerate on the bus after probe, drivers
frequently need to wait for the device to initialise from common driver
code. The common system is to split drivers into a core module and then
a module for each communication bus. These two facts tend to cause
Kconfig issues, the issue tends to be when SOUNDWIRE=m and DRIVER_I2C=y,
this usually selects DRIVER=y. The driver code then wants to call
sdw_slave_wait_for_init(), but this results in calling a module function
from built in code. A depends on SOUNDWIRE | !SOUNDWIRE could be added to
the end driver but this seems slightly off as it adds a lot of counter
intuitive depends.
A simpler solution is to make sdw_slave_wait_for_init() a static inline
function. As part of doing this add a check for the slave device being
NULL acknowledging that this is likely called from code that is shared
between control buses. It does require dropping the call to
sdw_show_ping_status() but this can be added back in end drivers that
used it originally.
Currently this is causing rand config issues on RT5682 and will soon
also cause similar problems on cs42l43.
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260623101814.24044-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- use correct names in kernel-doc comments
- add missing struct members to kernel-doc comments
Warning: include/linux/netfilter/x_tables.h:41 struct member 'targinfo' not described in 'xt_action_param'
Warning: include/linux/netfilter/x_tables.h:41 Excess struct member 'targetinfo' description in 'xt_action_param'
Warning: include/linux/netfilter/x_tables.h:90 struct member 'family' not described in 'xt_mtchk_param'
Warning: include/linux/netfilter/x_tables.h:90 struct member 'nft_compat' not described in 'xt_mtchk_param'
Warning: include/linux/netfilter/x_tables.h:101 expecting prototype for struct xt_mdtor_param. Prototype was for struct xt_mtdtor_param instead
Warning: include/linux/netfilter/x_tables.h:121 struct member 'net' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'table' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'target' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'targinfo' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'hook_mask' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'family' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'nft_compat' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:345 expecting prototype for xt_recseq(). Prototype was for DECLARE_PER_CPU() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Memoryless force-feedback devices use a timer to manage playback of
effects. When a driver for such a device is unbound (or the device is
unregistered for other reasons), the driver typically frees its private
data synchronously. However, the input_dev structure (and its associated
force-feedback structures, including the timer) is only freed when the
last user closes the corresponding device node.
If userspace keeps the device node open while the device is unregistered
(e.g., during driver unbind), the force-feedback timer can still fire
after the driver's private data has been freed.
Introduce a new 'stop' callback to struct ff_device, and call it from
input_unregister_device() before the device is deleted. Implement this
callback for memoryless devices and synchronously shut down the timer to
ensure it is stopped and cannot be rearmed once unregistration happens.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add a new function rtc_read_next_alarm() that reads the next expiring
alarm from the RTC timerqueue. This is different from rtc_read_alarm(),
which only reads the aie_timer.
The wakealarm sysfs file programs the rtc->aie_timer, whereas the
alarmtimer suspend routine programs its own timer into the RTC timerqueue.
Both timers end up in the RTC's timerqueue, and the first expiring timer
is what gets armed in the hardware.
This new function allows code to query which alarm will actually fire
next, regardless of which subsystem programmed it. This is needed by
platform code that needs to program secondary timers based on the
actual next wakeup time.
Link: https://lore.kernel.org/all/87ed50z0le.ffs@tglx
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260521043714.1022930-2-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
f2fs_recover_orphan_inodes() trusts the orphan block entry_count when
replaying orphan inodes from the checkpoint pack. A corrupted entry_count
larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the
ino[] array and interpret footer or following data as inode numbers.
On a crafted image, mounting an unpatched kernel can drive orphan recovery
into f2fs_bug_on() and panic the kernel. Validate entry_count before
consuming entries so corrupted checkpoint data fails the mount with
-EFSCORRUPTED and requests fsck instead.
Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be
recorded in the superblock s_errors[] field. This gives fsck a persistent
hint even though mount-time orphan recovery failure may leave no chance to
persist SBI_NEED_FSCK through a checkpoint.
Cc: stable@kernel.org
Fixes: 127e670abfa7 ("f2fs: add checkpoint operations")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 7.2-rc1.
Overall we end up removing more code than added, due to an obsolete
synclink_gt driver being removed from the tree, always a nice thing to
see happen.
Other than that driver removal, major things included in here are:
- max310x serial driver updates and fixes
- 8250 driver updates and rework in places to make it more "modern"
- dts file updates
- serial driver core tweaks and updates
- vt code cleanups
- vc_screen crash fixes
- other minor driver updates and cleanups
All of these have been in linux-next for well over a week with no
reported issues"
* tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
serial: 8250_pci: Don't specify conflicting values to pci_device_id members
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero
vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width()
serial: 8250: fix possible ISR soft lockup
dt-bindings: serial: rs485: remove deprecated .txt binding stub
serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial
tty: serial: Use named initializers for arrays of i2c_device_data
serial: 8250_dw: remove clock-notifier infrastructure
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
amba/serial: amba-pl011: Bring back zx29 UART support
serial: 8250: Add support for console flow control
serial: 8250: Check LSR timeout on console flow control
serial: 8250: Set cons_flow on port registration
tty: serial: 8250: protect against NULL uart->port.dev in register
arm64: dts: add support for A9 based Amlogic BY401
dt-bindings: arm: amlogic: add A311Y3 support
serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled
serial: qcom-geni: Avoid probing debug console UART without console support
serial: max310x: add comments for PLL limits
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull more i2c updates from Andi Shyti:
"Cleanups:
- generic cleanups in qcom, qcom-cci and pxa, plus core cleanups in
algo-bit and atr
Fixes:
- davinci: clean up cpufreq notifier on probe failure
- imx-lpi2c: suspend the adapter while hardware is powered down
- ls2x-v2: return IRQ_HANDLED after servicing error interrupts
- stm32f7: fix timing calculation accuracy
DT bindings:
- microchip: permit resets
- i2c-mux-pinctrl: update maintainer entry
- i2c-mux-reg: convert bindings to DT schema"
* tag 'i2c-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: pxa: Use named initializers for the platform_device_id array
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
i2c: stm32f7: truncate clock period instead of rounding it
dt-bindings: i2c: microchip,corei2c: permit resets
i2c: qcom: Unify user-visible "Qualcomm" name
i2c: ls2x-v2: return IRQ_HANDLED after servicing an error
i2c: atr: annotate i2c_atr_adap_desc->aliases with __counted_by_ptr
i2c: algo: bit: use str_plural helper in bit_xfer
dt-bindings: i2c: i2c-mux-pinctrl: change maintainer
dt-bindings: i2c: convert i2c-mux-reg to DT schema
i2c: davinci: Unregister cpufreq notifier on probe failure
i2c: qcom-cci: Remove overcautious disable_irq() calls
i2c: qcom-cci: Move cci_init() under cci_reset() function
i2c: qcom-cci: Do not check return value of cci_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This cycle, there was a lot of work around the mipi-i3c-hci driver
that also led to improvements of the core. We also have support for a
new SoC, the Microchip SAMA7D65. And of course, there are small fixes
for the other controller drivers.
Subsystem:
- introduce dynamic address reconciliation after DAA
- add preliminary API for hub support
- fixes for dev_nack_retry_count handling
- move hot-join support in the core instead of open coding in
different drivers
Drivers:
- mipi-i3c-hci-pci: DMA abort, recovery and related improvements,
hot-join support, Microchip SAMA7D65 support, fix possible race in
IBI handling
- dw-i3c-master: fix IBI count register selection for versalnet
- svc: interrupt handling fixes for NPCM845"
* tag 'i3c/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (45 commits)
i3c: mipi-i3c-hci: Use named initializers for platform_device_id's .driver_data
i3c: master: Use unsigned int for dev_nack_retry_count consistently
i3c: master: Add missing runtime PM get in dev_nack_retry_count_store()
i3c: master: Update dev_nack_retry_count under maintenance lock
i3c: master: Expose the APIs to support I3C hub
i3c: master: rename i3c_master_reattach_i3c_dev() to *_locked
i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk
dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible
i3c: Consistently define pci_device_ids using named initializers
i3c: master: Reconcile dynamic addresses after DAA
i3c: master: Move DAA API functions after i3c_master_add_i3c_dev_locked()
i3c: master: Make i3c_master_add_i3c_dev_locked() return void
i3c: mipi-i3c-hci: Tolerate i3c_master_add_i3c_dev_locked() failures in DAA
i3c: master: Prevent reuse of dynamic address on device add failure
i3c: mipi-i3c-hci: Ignore DISEC failures when disabling IBIs
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c: mipi-i3c-hci: Add Hot-Join support
i3c: master: Export i3c_master_enec_disec_locked()
i3c: master: Defer new-device registration out of DAA caller context
i3c: dw: Drop redundant Hot-Join cancel_work_sync() in shutdown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull more slab updates from Vlastimil Babka:
- Introduce and wire up a new alloc_flags parameter for modifying
slab-specific behavior without adding or reusing gfp flags. Also
introduce slab_alloc_context to keep function parameter bloat in
check. Both are similar to what the page allocator does.
kmalloc_flags() exposes alloc_flags for mm-internal users.
- SLAB_ALLOC_NOLOCK flag is used to implement kmalloc_nolock()
behavior without relying on lack of __GFP_RECLAIM, which caused
false positives with workarounds like fd3634312a04 ("debugobject:
Make it work with deferred page initialization - again").
- SLAB_ALLOC_NO_RECURSE replaces __GFP_NO_OBJ_EXT, which could have
been removed, but pending memory allocation profiling changes in
mm tree have grown a new user - there is however a work ongoing
to replace that too, so __GFP_NO_OBJ_EXT should eventually be
removed. (Vlastimil Babka)
- Add kmem_buckets_alloc_track_caller() with a user to be added in the
net tree (Pedro Falcato)
- Fixes for kernel-doc and slabinfo (Randy Dunlap, Yichong Chen)
* tag 'slab-for-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/mm/slabinfo: fix total_objects attribute name
slab: recognize @GFP parameter as optional in kernel-doc
mm/slab: add a node-track-caller variant for kmem buckets allocation
mm/slab: replace __GFP_NO_OBJ_EXT with SLAB_ALLOC_NO_RECURSE for sheaves
mm/slab: remove __GFP_NO_OBJ_EXT usage from alloc_slab_obj_exts()
mm/slab: introduce kmalloc_flags()
mm/slab: allow __GFP_NOMEMALLOC and __GFP_NOWARN for kmalloc_nolock()
mm/slab: pass slab_alloc_context to __do_kmalloc_node()
mm/slab: allow kmem_cache_alloc_bulk() with any gfp flags
mm/slab: replace slab_alloc_node() parameters with slab_alloc_context
mm/slab: pass alloc_flags through slab_post_alloc_hook() chain
mm/slab: pass alloc_flags to new slab allocation
mm/slab: add alloc_flags to slab_alloc_context
mm/slab: replace struct partial_context with slab_alloc_context
mm/slab: introduce alloc_flags and SLAB_ALLOC_NOLOCK
mm/slab: introduce slab_alloc_context
mm/slab: stop inlining __slab_alloc_node()
mm/slab: do not init any kfence objects on allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- consolidate s390 idle time accounting by moving all CPU time tracking
to the architecture backend and eliminate the mix of architecture-
specific and common code accounting
- Add missing EXPORT_SYMBOL_GPL() to kcpustat_field_idle() and
kcpustat_field_iowait() functions
- Finalize ptep_get() conversion by replacing direct page table entry
dereferencing with proper accessors (ptep_get(), pmdp_get(), etc.)
- Explicitly check the buffer length in PKEY_VERIFYPROTK ioctl and
pkey_pckmo implementations and fail if the length is exceeded
* tag 's390-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pkey: Check length in pkey_pckmo handler implementation
s390/pkey: Check length in PKEY_VERIFYPROTK ioctl
s390/idle: Add missing EXPORT_SYMBOL_GPL()
s390/mm: Complete ptep_get() conversion
s390/idle: Remove idle time and count sysfs files
s390/idle: Provide arch specific kcpustat_field_idle()/kcpustat_field_iowait()
s390/irq/idle: Use stcke instead of stckf for time stamps
s390/timex: Move union tod_clock type to separate header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"NAND changes:
- Extend SPI NAND continuous read to Winbond devices, which requires
numerous changes in the spi-{mem,nand} layers such as the need for
a secondary read operation template
- Continuous reads in general have also been enhanced/fixed for
avoiding potential issues at probe time and at block boundaries
SPI NOR changes:
- Big set of cleanups and improvements to the locking support.
This series contains some cleanups and bug fixes for code and
documentation around write protection. Then support is added for
complement locking, which allows finer grained configuration of
what is considered locked and unlocked. Then complement locking is
enabled on a bunch of Winbond W25 flashes
- Fix die erase support on Spansion flashes.
Die erase is only supported on multi-die flashes, but the die erase
opcode was set for all. When the opcode is set, it overrides the
default chip erase opcode which should be used for single-die
flashes. Only set the opcode on multi-die flashes. Also, the opcode
was not set on multi-die s28hx-t flashes. Set it so they can use
die-erase correctly
General changes:
- A few drivers and mappings have been removed following SoCs support
removal
- And again, there is the usual load of misc improvements and fixes"
* tag 'mtd/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (63 commits)
mtd: cfi: Use common error handling code in two functions
mtd: slram: simplify register_device() cleanup
mtd: slram: remove failed entries from the device list
mtd: rawnand: ndfc: use ioread32be/iowrite32be and allow COMPILE_TEST
mtd: spi-nor: spansion: add die erase support in s28hx-t
mtd: spi-nor: spansion: use die erase for multi-die devices only
mtd: spi-nor: winbond: Add W25Q02NWxxIM CMP locking support
mtd: spi-nor: winbond: Add W25Q01NWxxIM CMP locking support
mtd: spi-nor: winbond: Add W25Q01NWxxIQ CMP locking support
mtd: spi-nor: winbond: Add W25H02NWxxAM CMP locking support
mtd: spi-nor: winbond: Add W25H01NWxxAM CMP locking support
mtd: spi-nor: winbond: Add W25H512NWxxAM CMP locking support
mtd: spi-nor: Add steps for testing locking with CMP
mtd: spi-nor: swp: Add support for the complement feature
mtd: spi-nor: Add steps for testing locking support
mtd: maps: remove obsolete impa7 map driver
mtd: maps: remove uclinux map driver
mtd: maps: remove AMD Élan specific drivers
mtd: inftlmount: convert printk(KERN_WARNING) to pr_warn
mtd: Consistently define pci_device_ids
...
|
|
This reverts commit 7b32f64bc512b40b268776c5ac4d354b325b3197.
This patch caused a significant performance regression, so revert it, and
we can determine whether the approach is sensible or not moving forwards,
and if so how to avoid this.
There was a merge conflict with commit de97ae6222c1 ("mm/readahead: no
PG_readahead on EOF"), care was taken to ensure that the revert retained
the behaviour of this patch and cleanly reverts commit 7b32f64bc512 ("mm:
limit filemap_fault readahead to VMA boundaries") only.
Link: https://lore.kernel.org/20260619112852.104213-1-ljs@kernel.org
Fixes: 7b32f64bc512 ("mm: limit filemap_fault readahead to VMA boundaries")
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202606181547.617a6967-lkp@intel.com
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After READ_ONLY_THP_FOR_FS is removed, FS either supports large folio or
not. folio_split() can be used on a FS with large folio support without
worrying about getting a THP on a FS without large folio support.
When READ_ONLY_THP_FOR_FS was present, a PMD large pagecache folio can
appear in a FS without large folio support after khugepaged or
madvise(MADV_COLLAPSE) creates it. During truncate_inode_partial_folio(),
such a PMD large pagecache folio is split and if the FS does not support
large folio, it needs to be split to order-0 ones and could not be split
non uniformly to ones with various orders. try_folio_split_to_order() was
added to handle this situation by checking folio_check_splittable(...,
SPLIT_TYPE_NON_UNIFORM) to detect if the large folio is created due to
READ_ONLY_THP_FOR_FS and the FS does not support large folio. Now
READ_ONLY_THP_FOR_FS is removed, all large pagecache folios are created
with FSes supporting large folio, this function is no longer needed and
all large pagecache folios can be split non uniformly.
Link: https://lore.kernel.org/20260517135416.1434539-10-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
filemap_nr_thps*() are removed, the related field, address_space->nr_thps,
is no longer needed. Remove it. This shrinks struct address_space by 8
bytes on 64-bit systems which may increase the number of inodes we can
cache.
Link: https://lore.kernel.org/20260517135416.1434539-8-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
They are used by READ_ONLY_THP_FOR_FS to handle writes to FSes without
large folio support, so that read-only THPs created in these FSes are not
seen by the FSes when the underlying fd becomes writable. Now read-only
PMD THPs only appear in a FS with large folio support and the supported
orders include PMD_ORDER.
READ_ONLY_THP_FOR_FS was using mapping->nr_thps, inode->i_writecount, and
smp_mb() to prevent writes to a read-only THP and collapsing writable
folios into a THP. In collapse_file(), mapping->nr_thps is increased,
then smp_mb(), and if inode->i_writecount > 0, collapse is stopped, while
do_dentry_open() first increases inode->i_writecount, then a full memory
fence, and if mapping->nr_thps > 0, all read-only THPs are truncated.
Now this mechanism can be removed along with READ_ONLY_THP_FOR_FS code,
since a dirty folio check has been added after try_to_unmap() in
collapse_file() to prevent dirty folios from being collapsed as clean.
Link: https://lore.kernel.org/20260517135416.1434539-7-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove the READ_ONLY_THP_FOR_FS gate and khugepaged for file-backed
pmd-sized hugepages are enabled by the global transparent hugepage
control. khugepaged can still be enabled by per-size control for anon and
shmem when the global control is off.
Add shmem_hpage_pmd_enabled() stub for !CONFIG_SHMEM to remove
IS_ENABLED(SHMEM) in hugepage_enabled().
Clean up hugepage_enabled() by moving anon code to anon_hpage_enabled().
Link: https://lore.kernel.org/20260517135416.1434539-5-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Nico Pache <npache@redhat.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Remove CONFIG_READ_ONLY_THP_FOR_FS and enable file THP for
writable files", v6.
This patch (of 14):
collapse_file() requires FSes supporting large folio with at least
PMD_ORDER, so replace the READ_ONLY_THP_FOR_FS check with that.
MADV_COLLAPSE ignores shmem huge config, so exclude the check for shmem.
While at it, replace VM_BUG_ON with VM_WARN_ON_ONCE.
Add a helper function mapping_pmd_folio_support() for FSes supporting
large folio with at least PMD_ORDER.
Link: https://lore.kernel.org/20260517135416.1434539-1-ziy@nvidia.com
Link: https://lore.kernel.org/20260517135416.1434539-2-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add three new mTHP statistics to track collapse failures for different
orders when encountering swap PTEs, excessive none PTEs, and shared PTEs:
- collapse_exceed_swap_pte: Increment when mTHP collapse fails due to
encountering a swap PTE.
- collapse_exceed_none_pte: Counts when mTHP collapse fails due to
exceeding the none PTE threshold for the given order
- collapse_exceed_shared_pte: Counts when mTHP collapse fails due to
encountering a shared PTE.
These statistics complement the existing THP_SCAN_EXCEED_* events by
providing per-order granularity for mTHP collapse attempts. The stats are
exposed via sysfs under
`/sys/kernel/mm/transparent_hugepage/hugepages-*/stats/` for each
supported hugepage size.
As we currently do not support collapsing mTHPs that contain a swap or
shared entry, those statistics keep track of how often we are encountering
failed mTHP collapses due to these restrictions.
We will add support for mTHP collapse for anonymous pages next; lets also
track when this happens at the PMD level within the per-mTHP stats.
Link: https://lore.kernel.org/20260605161422.213817-9-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rafael Aquini <raquini@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Takashi Iwai (SUSE) <tiwai@suse.de>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Usama Arif <usama.arif@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pass order to alloc_charge_folio() and update mTHP statistics.
Link: https://lore.kernel.org/20260605161422.213817-3-npache@redhat.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Co-developed-by: Nico Pache <npache@redhat.com>
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Usama Arif <usama.arif@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rafael Aquini <raquini@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Takashi Iwai (SUSE) <tiwai@suse.de>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Letting a function argument indicate whether a lock or unlock operation
should be performed is incompatible with compile-time analysis of locking
operations by sparse and Clang. Hence, split codetag_lock_module_list()
into two functions: a function that locks cttype->mod_lock and another
function that unlocks cttype->mod_lock. No functionality has been
changed. See also commit 916cc5167cc6 ("lib: code tagging framework").
Link: https://lore.kernel.org/20260324214226.3684605-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pages allocated before page_ext is available have their codetag left
uninitialized. Track these early PFNs and clear their codetag in
clear_early_alloc_pfn_tag_refs() to avoid "alloc_tag was not set" warnings
when they are freed later.
Currently a fixed-size array of 8192 entries is used, with a warning if
the limit is exceeded. However, the number of early allocations depends
on the number of CPUs and can be larger than 8192.
Replace the fixed-size array with a dynamically allocated linked list of
pfn_pool structs. Each node is allocated via alloc_page() and mapped to a
pfn_pool containing a next pointer, an atomic slot counter, and a PFN
array that fills the remainder of the page.
The tracking pages themselves are allocated via alloc_page(), which would
trigger __pgalloc_tag_add() -> alloc_tag_add_early_pfn() and recurse
indefinitely. Introduce __GFP_NO_CODETAG (reuses the %__GFP_NO_OBJ_EXT
bit) and pass gfp_flags through pgalloc_tag_add() so that the early path
can skip recording allocations that carry this flag.
Link: https://lore.kernel.org/20260604024008.46592-1-hao.ge@linux.dev
Signed-off-by: Hao Ge <hao.ge@linux.dev>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
- firewire drivers have been able to assign an arbitrary value in the
mod_device entry, which is typed as kernel_ulong_t.
While storing the pointer value is legitimate, conversion back to a
pointer has been performed without preserving the const qualifier.
Uwe Kleine-König introduced an union to provide safer and more robust
conversions, as part of the ongoing CHERI enhancement work for ARM
and RISC-V architectures. This includes changes to the sound
subsystem, since the conversion pattern is widely used in ALSA
firewire stack.
- Userspace applications can request the core function to perform
isochronous resource management procedures. Dingsoul reported a
reference-count leak when these procedures are processed in workqueue
contexts.
This refactors the relevant code paths following a divide and conquer
approach. Consequently, it became clear that the issue still remain
in the path when userspace applications delegate automatic resource
reallocation after bus resets to the core.
In practice, the leak is rarely triggered, and a complete fix is
still in progress.
* tag 'firewire-updates-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: Open-code topology list walk
firewire: core: cancel using delayed work for iso_resource_once management
firewire: core: rename member name for channel mask of isoc resource
firewire: core: minor code refactoring for case-dependent parameters of iso resources management
ALSA: firewire: Make use of ieee1394's .driver_data_ptr
firewire: Simplify storing pointers in device id struct
firewire: core: move allocation/reallocation paths into specific branch after isoc resource management in cdev
firewire: core: refactor notification type determination after isoc resource management in cdev
firewire: core: use switch statement for post-processing of isoc resource management in cdev
firewire: core: reduce critical section duration in pre-processing of isoc resource management in cdev
firewire: core: code cleanup for iso resource auto creation
firewire: core: append _auto suffix for non-once iso resource operations
firewire: core: code cleanup to remove old implementations for once operation
firewire: core: split functions for iso_resource once operation
firewire: core: code refactoring for helper function to fill iso_resource parameters
firewire: core: code refactoring to queue work item for iso_resource
firewire: core: code refactoring for early return at client resource allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull liveupdate updates from Mike Rapoport:
"Kexec Handover (KHO):
- make memory preservation compatible with deferred initialization
of the memory map
Live Update Orchestrator (LUO):
- add LIVEUPDATE_SESSION_GET_NAME ioctl and parameter verification
for LIVEUPDATE_IOCTL_CREATE_SESSION ioctl
- documentation updates for liveupdate=on command line option,
systemd support and the current compatibility status
- remove the fixed limits on the number of files that can be
preserved within a single session, and the total number of
sessions managed by the LUO
Misc fixes:
- reference count incoming File-Lifecycle-Bound (FLB) data so
it cannot be freed while a subsystem is still using it
- fixes for a TOCTOU race in luo_session_retrieve(), a use-
after-free in the file finish and unpreserve paths, concurrent
session mutations during reboot and serialization on
preserve_context kexec
- make sure ioctls for incoming LUO sessions are blocked for
outgoing sessions and vice versa
- make sure KHO scratch size is always aligned by
CMA_MIN_ALIGNMENT_BYTES
- fix memblock tests build issue introduced by KHO changes"
* tag 'liveupdate-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux: (36 commits)
liveupdate: Document that retrieve failure is permanent
docs: memfd_preservation: fix rendering of ABI documentation
selftests/liveupdate: Add stress-files kexec test
selftests/liveupdate: Add stress-sessions kexec test
selftests/liveupdate: Test session and file limit removal
liveupdate: Remove limit on the number of files per session
liveupdate: Remove limit on the number of sessions
liveupdate: defer session block allocation and physical address setting
kho: add support for linked-block serialization
liveupdate: Extract luo_session_deserialize_one helper
liveupdate: Extract luo_file_deserialize_one helper
liveupdate: register luo_ser as KHO subtree
liveupdate: centralize state management into struct luo_ser
liveupdate: avoid mixing cleanup guards with goto in luo_session_retrieve_fd
liveupdate: change file_set->count type to u64 for type safety
liveupdate: Remove unused ser field from struct luo_session
liveupdate: fix u-a-f in luo_file_unpreserve_files() and luo_file_finish()
liveupdate: block session mutations during reboot
liveupdate: fix TOCTOU race in luo_session_retrieve()
liveupdate: skip serialization for context-preserving kexec
...
|
|
* Extend SPI NAND continuous read to Winbond devices, which requires
numerous changes in the spi-{mem,nand} layers such as the need for a
secondary read operation template.
* Continuous reads in general have also been enhanced/fixed for avoiding
potential issues at probe time and at block boundaries.
Plus, there is the usual load of misc fixes and improvements.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add i.MX94 support to the i.MX remoteproc driver, covering the
Cortex-M7 and Cortex-M33 Sync cores. This also fixes programming of
non-zero System Manager CPU/LMM reset vectors.
- Move the remoteproc resource table definitions to a separate header,
so they can be used by clients that do not otherwise depend on
remoteproc. Switch the firmware resource handling over to the common
iterator.
- Update the Xilinx R5F remoteproc driver to check the remote core
state before attaching, drop a binding header dependency, and add
firmware-name based auto boot support.
- Add Qualcomm Hawi ADSP/CDSP bindings, together with Shikra RPM
bindings and CDSP, LPAICP, and MPSS PAS support. Fix a Qualcomm
minidump leak, clean up PAS and WCSS reset handling, and make the
user-visible Qualcomm naming consistent.
- Remove a duplicate STM32_RPROC Kconfig dependency and make i.MX
remoteproc instances use the device node name so multiple processors
can be distinguished in sysfs.
* tag 'rproc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom: pas: Drop start/stop completion from struct qcom_pas
remoteproc: qcom: pas: Add Shikra remoteproc support
dt-bindings: remoteproc: qcom,shikra-pas: Document Shikra PAS remoteprocs
dt-bindings: remoteproc: Add Shikra RPM processor compatible
remoteproc: qcom: Unify user-visible "Qualcomm" name
remoteproc: qcom: Fix leak when custom dump_segments addition fails
remoteproc: qcom_q6v5_wcss: drop redundant wcss_q6_bcr_reset
dt-bindings: remoteproc: qcom,sm8550-pas: Add Hawi CDSP compatible
dt-bindings: remoteproc: qcom,sm8550-pas: Add Hawi ADSP compatible
remoteproc: xlnx: Enable auto boot feature
dt-bindings: remoteproc: xlnx: Add firmware-name property
remoteproc: xlnx: Remove binding header dependency
remoteproc: imx_rproc: Use device node name as processor name
remoteproc: use rsc_table_for_each_entry() in rproc_handle_resources()
remoteproc: Move resource table data structure to its own header
remoteproc: xlnx: Check remote core state
remoteproc: imx_rproc: Add support for i.MX94
remoteproc: imx_rproc: Program non-zero SM CPU/LMM reset vector
dt-bindings: remoteproc: imx-rproc: Support i.MX94
remoteproc: Dead code cleanup in Kconfig for STM32_RPROC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply drivers:
- New EC driver providing battery info for Microsoft Surface RT
- New driver for battery charger in Samsung S2M PMICs
- Rework max17042 driver
- sysfs control for bd71828 auto input current limitation
All over:
- Use named fields for struct platform_device_id and of_device_id
entries
- Misc small cleanups and fixes"
* tag 'for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits)
Documentation: ABI: sysfs-class-reboot-mode-reboot_modes: fix doc warnings
power: supply: charger-manager: fix refcount leak in is_full_charged()
power: supply: core: fix supplied_from allocations
power: supply: max17042_battery: Use modern PM ops to clear up warning
power: supply: add support for Samsung S2M series PMIC charger device
power: supply: Add support for Surface RT battery and charger
dt-bindings: embedded-controller: Document Surface RT EC
power: supply: bd71828: sysfs for auto input current limitation
power: supply: cpcap-charger: include missing <linux/property.h>
power: supply: cros_charge-control: Move MODULE_DEVICE_TABLE next to the table itself
power: supply: ab8500_fg: Fix typos in comments
power: supply: Use named initializers for arrays of i2c_device_data
power: supply: Remove unused jz4740-battery.h
power: reset: st-poweroff: Use of_device_get_match_data()
power: supply: bq257xx: Add fields for 'charging' and 'overvoltage' states
power: supply: bq257xx: Consistently use indirect get/set helpers
power: supply: bq257xx: Make the default current limit a per-chip attribute
power: supply: bq257xx: Fix VSYSMIN clamping logic
power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak
power: supply: max17042: fix OF node reference imbalance
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull strncpy removal from Kees Cook:
- Remove the per-arch strncpy implementations in alpha, m68k, powerpc,
x86, and xtensa
- Remove strncpy API
Over the last 6 years working on strncpy removal there were 362
commits by 70 contributors. Folks with more than 1 commit were:
211 Justin Stitt <justinstitt@google.com>
22 Xu Panda <xu.panda@zte.com.cn>
21 Kees Cook <kees@kernel.org>
17 Thorsten Blum <thorsten.blum@linux.dev>
12 Arnd Bergmann <arnd@arndb.de>
4 Pranav Tyagi <pranav.tyagi03@gmail.com>
4 Lee Jones <lee@kernel.org>
2 Steven Rostedt <rostedt@goodmis.org>
2 Sam Ravnborg <sam@ravnborg.org>
2 Marcelo Moreira <marcelomoreira1905@gmail.com>
2 Krzysztof Kozlowski <krzk@kernel.org>
2 Kalle Valo <kvalo@kernel.org>
2 Jaroslav Kysela <perex@perex.cz>
2 Daniel Thompson <danielt@kernel.org>
2 Andrew Lunn <andrew@lunn.ch>
* tag 'strncpy-removal-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string: Remove strncpy() from the kernel
xtensa: Remove arch-specific strncpy() implementation
x86: Remove arch-specific strncpy() implementation
powerpc: Remove arch-specific strncpy() implementation
m68k: Remove arch-specific strncpy() implementation
alpha: Remove arch-specific strncpy() implementation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
|
Pull kvm updates from Paolo Bonzini:
"arm64:
This is a bit of an odd merge window on the KVM/arm64 front. There
is absolutely no new feature in the pull request. It is purely
fixes, because it is simply becoming too hard to review new stuff
when so many AI-fuelled fixes hit the list.
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed as well
- Large set of pKVM fixes, mostly addressing recurring issues around
hypervisor tracking of donated pages in obscure cases where the
donation could fail and leave things in a bizarre state
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned out to
be far more invasive than initially expected..
- Reduce the overhead of L1/L2 context switch by not touching the FP
registers
- Fix the way non-implemented page sizes are dealt with when a guest
insist on using them for S2 translation
- The usual set of low-impact fixes and cleanups all over the map
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX) that
caused the FPU load request
- Some enhancements about interrupt injection
- Some bug fixes and other small changes
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic PTE
updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on a
memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both of
these are preparatory changes for upcoming APX support
- Clean up KVM's register tracking and storage, primarily to prepare
for APX support, which expands the maximum number of GPRs from 16
to 32
- Keep a single copy of the PDPTRs rather than two, since
architecturally there is just one
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor
code gets a chance to handle things like reaping the PML buffer
- Update KVM's view of PV async enabling if and only if the MSR write
fully succeeds
- Fix a variety of issues where the emulator doesn't honor
guest-debug state, and clean up related code along the way
- Synthesize EPT Violation and #NPF "error code" bits when injecting
faults into L1 that didn't originate in hardware (in which case the
VMCS/VMCB doesn't hold relevant information)
- Add support for virtualizing (well, emulating) AMD's flavor of
CPL>0 CPUID faulting
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and
fix a variety of minor bugs along the way
- Fix an OOB memory access due to not checking the VP ID when
handling a Hyper-V PV TLB flush for L2
- Fix a bug in the mediated PMU's handling of fixed counters that
allowed the guest to bypass the PMU event filter
- Allow userspace to return EAGAIN when handling SNP and TDX
hypercalls, so the KVM can forward a "retry" status code to the
guest, and reserve all unused error codes for future usage
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific
logic as possible into the TDX code, and to funnel (almost) all
S-EPT updates into a single chokepoint. The motivation is largely
to prepare for upcoming Dynamic PAMT support, but the cleanups are
nice to have on their own
- Plug a hole in shadow page table handling, where KVM fails to
recursively zap nested EPT/NPT shadow page tables when the nested
hypervisor tears down its own EPT/NPT page tables from the bottom
up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in
the generic section; also run with MBEC enabled even for non-nested
mode
- Use the kernel's "enum pg_level" in the TDX APIs instead of the
TDX-Module's level definitions (which are 0-based)
- Rework the TDX memory APIs to not require/assume that guest memory
is backed by "struct page" (in prepartion for guest_memfd hugepage
support)
- Fix a largely benign bug where KVM TDX would incorrectly state it
could emulate several x2APIC MSRs
- Use the "safe" WRMSR API when proxying LBR MSR writes as the
to-be-written value is guest controlled and completely unvalidated
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in
the generic section; also run with GMET enabled even for non-nested
mode
- Fixes and minor cleanups to GHCB handling, on top of the earlier
work already merged into 7.1-rc
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers
- Add support for virtualizing gPAT (KVM previously just used L1's
PAT when running L2)
- Fix goofs where KVM mishandles side effects (e.g. single-step and
PMC updates) when emulating VMRUN
- Fix a variety of bugs in AVIC's handling of x2APIC MSR
interception, most notably where KVM didn't disable interception of
IRR, ISR, and TMR regs
- Add support for virtualizing Host-Only/Guest-Only bits in the
mediated PMU
- Don't advertise support for unusable VM types, and account for VM
types that are disabled by firmware, e.g. to mitigate security
vulnerabilities
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with
bugs and unnecessarily complicated, and add comprehensive tests
- Clean up and deduplicate the SEV page pinning code
- Fix minor goofs related to writing back CPUID information after
firmware rejects a CPUID page for an SNP vCPU
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to
follow the kernel's nomenclature, e.g. for mmu_notifiers
- Use guard() to cleanup up various KVM+VFIO flows
- Minor cleanups
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a
gmem range to multiple memslots, and fix the test that was supposed
to ensure KVM returns -EEXIST
- Treat memslot binding offsets and sizes as unsigned values to fix a
bug where KVM interprets a large "offset + size" as a negative
value and allows a nonsensical offset
- Use the inode number instead of the page offset for the NUMA
interleaving index to fix a bug where the effective index would
jump by two for consecutive pages (the caller also adds in the page
offset)
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the
first pass, as always waiting only 1ms hid a KVM RISC-V bug as the
test reaped the bitmap before KVM could build up enough state to
hit the bug
- A pile of one-off fixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (326 commits)
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
KVM: x86: Fix shadow paging use-after-free due to unexpected role
KVM: s390: Introducing kvm_arch_set_irq_inatomic fast inject
KVM: s390: Enable adapter_indicators_set to use mapped pages
KVM: s390: Add map/unmap ioctl and clean mappings post-guest
riscv: kvm: Use endian-specific __lelong for NACL shared memory
KVM: selftests: access_tracking_perf_test: bump number of NUMA nodes to 32
KVM: s390: vsie: Implement ASTFLEIE facility 2
KVM: s390: vsie: Refactor handle_stfle
s390/sclp: Detect ASTFLEIE 2 facility
KVM: s390: Minor refactor of base/ext facility lists
KVM: x86/mmu: move pdptrs out of the MMU
KVM: x86: check that kvm_handle_invpcid is only invoked with shadow paging
KVM: nSVM: invalidate cached PDPTRs across nested NPT transitions
KVM: nVMX: remove unnecessary code in prepare_vmcs02_rare
KVM: x86: remove nested_mmu from mmu_is_nested()
KVM: arm64: vgic-its: Make ABI commit helpers return void
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
LoongArch: KVM: Add missing slots_lock for device register/unregister
LoongArch: KVM: Validate irqchip index in irqfd routing
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- use software nodes for GPIO code
- cleanups and fixes
* tag 'mips_7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (41 commits)
mips: select legacy gpiolib interfaces where used
MIPS: lib: Remove '.hidden' for local symbols
MIPS: VDSO: Avoid including .got in dynamic segment
MIPS: smp: report dying CPU to RCU in stop_this_cpu()
MIPS: kernel: proc: Delete unnecessary braces in show_cpuinfo()
MIPS: kernel: proc: Use seq_putc() calls in show_cpuinfo()
mips: sched: Fix CPUMASK_OFFSTACK memory corruption
MIPS: mm: Fix out-of-bounds write in maar_res_walk()
MIPS: ath79: reduce ARCH_DMA_MINALIGN
mips: dts: ar9132: fix wdt node name
mips: Remove remaining defconfig references to the pktcdvd driver
MIPS: mm: remove comment referring to removed CONFIG_MIPS_CMP
MIPS: alchemy: db1300: switch to static device properties
MIPS: alchemy: gpr: switch to static device properties
MIPS: alchemy: db1000: use nodes attached to GPIO chips in properties
MIPS: alchemy: mtx1: attach software nodes to GPIO chips
MIPS: alchemy: provide visible function prototypes to board files
MIPS: alchemy: platform: add missing include
MIPS: ip22-gio: do not export device release function
MIPS: ip22-gio: switch to dynamic root device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt
- Do not invalidate entire buffer for invalid sub-buffers
For the persistent ring buffer, if one sub-buffer is found to be
invalid, it invalidates the entire per CPU ring buffer. This can lose
a lot of valuable data if there's some corruption with the writes to
the buffer not syncing properly on a hard crash. Instead, if a
sub-buffer is found to be invalid, simply zero it out and mark it for
"missed events".
When the persistent ring buffer is read and a sub-buffer that was
cleared due to being invalid on boot up is discovered, the output
will show "[LOST EVENTS]" to let the user know that events were
missing at that location. Displaying the events from valid buffers
can still be useful.
- Add a test to be able to test corrupted sub-buffers
If a persistent ring buffer is created as "ptraingtest" and the new
config that adds the test is enabled, when a panic happens, the
kernel will randomly corrupt one of the per CPU ring buffers. On boot
up, the sub-buffers with the corruption should be cleared and
flagged. When reading this buffer, the missed events should should
[LOST EVENTS].
- Add commit number in the sub-buffer meta debug info
The commit is used to know the content of a meta page. Add it to the
buffer_meta file that is shown for each per CPU buffer.
- Clean up the persistent ring buffer validation code
Add some helper functions and make variable names more consistent.
* tag 'trace-ring-buffer-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Better comment the use of RB_MISSED_EVENTS
ring-buffer: Show persistent buffer dropped events in trace_pipe file
ring-buffer: Show persistent buffer dropped events in trace file
ring-buffer: Have dropped subbuffers be persistent across reboots
ring-buffer: Cleanup buffer_data_page related code
ring-buffer: Cleanup persistent ring buffer validation
ring-buffer: Show commit numbers in buffer_meta file
ring-buffer: Add persistent ring buffer invalid-page inject test
ring-buffer: Skip invalid sub-buffers when rewinding persistent ring buffer
ring-buffer: Skip invalid sub-buffers when validating persistent ring buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove a redundant IS_ERR() check
trace_pipe_open() already checks for IS_ERR() and does it again in
the return path. Remove the return check.
- Export seq_buf_putmem_hex() to allow kunit tests against them
To add Kunit tests on seq_buf_putmem_hex(), it needs to be exported.
- Replace strcat() and strcpy() with seq_buf() logic
The code for synthetic events uses a series of strcat() and strcpy()
which can be error prone. Replace them with seq_buf() logic that does
all the necessary bound checking.
- Add a lockdep rcu_is_watching() to trace_##event##_enabled() call
The trace_##event##_enabled() is a static branch that is true if the
"event" is enabled. But this can hide bugs if this logic is in a
location where RCU is disabled and not "watching". It would only
trigger if lockdep is enabled and the event is enabled.
Add a "rcu_is_watching()" warning if lockdep is enabled in that
helper function to trigger regardless if the event is enabled or not.
- Remove the local variable in the trace_printk() macro
For name space integrity, remove the _______STR variable in the
trace_printk() macro for using the sizeof() macro directly.
- Use guard()s for the trace_recursion_record.c file
- Fix typo in a comment of eventfs_callback() kerneldoc
- Use trace_call__##event() in events within trace_##event##_enabled()
A couple of events are called within an if block guarded by
trace_##event##_enabled(). That is a static key that is only enabled
when the event is enabled. The trace_call_##event() calls the
tracepoint code directly without adding a redundant static key for
that check.
- Allow perf to read synthetic events
Currently, perf does not have the ability to enable a synthetic
event. If it does, it will either cause a kernel warning or error
with "No such device". Synthetic events are not much different than
kprobes and perf can handle fine with a few modifications.
- Replace printk(KERN_WARNING ...) with pr_warn()
- Replace krealloc() on an array with krealloc_array()
- Fix README file path name for synthetic events
- Change tracing_map tracing_map_array to use a flexible array
Instead of allocating a separate pointer to hold the pages field of
tracing_map_array, allocate the pages field as a flexible array when
allocating the structure.
- Fold trace_iterator_increment() into trace_find_next_entry_inc()
The function trace_iterator_increment() was only used by
trace_find_next_entry_inc(). It's not big enough to be a helper
function for one user. Fold it into its caller.
- Make field_var_str field a flexible array of hist_elt_data
Instead of allocating a separate pointer for the field_var_str array
of the hist_elt_data structure, allocate it as a flexible array when
allocating the structure.
- Disable KCOV for trace_irqsoff.c
Like trace_preemptirq.c, trace_irqsoff.c has code that will crash
when KCOV is enabled on ARM. The irqsoff tracing can be called on ARM
because the irqsoff tracing code can be run from early interrupt code
and produce coverage unrelated to syscall inputs.
- Fix warning in __unregister_ftrace_function() called by perf
Perf calls unregister_ftrace_function() without checking if its
ftrace_ops has already been unregistered. There's an error path where
on clean up it will unregister the ftrace_ops even if it wasn't
registered and causes a warning.
* tag 'trace-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
perf/ftrace: Fix WARNING in __unregister_ftrace_function
tracing: Disable KCOV instrumentation for trace_irqsoff.o
tracing: Turn hist_elt_data field_var_str into a flexible array
tracing: Move trace_iterator_increment() into trace_find_next_entry_inc()
tracing: Simplify pages allocation for tracing_map logic
tracing: Fix README path for synthetic_events
tracing: Use krealloc_array() for trace option array growth
tracing/branch: Use pr_warn() instead of printk(KERN_WARNING)
tracing: Allow perf to read synthetic events
HID: Use trace_call__##name() at guarded tracepoint call sites
cpufreq: amd-pstate: Use trace_call__##name() at guarded tracepoint call site
tracefs: Fix typo in a comment of eventfs_callback() kerneldoc
tracing: Switch trace_recursion_record.c code over to use guard()
tracing: Remove local variable for argument detection from trace_printk()
tracepoint: Add lockdep rcu_is_watching() check to trace_##name##_enabled()
tracing: Bound synthetic-field strings with seq_buf
seq_buf: Export seq_buf_putmem_hex() and add KUnit tests
tracing: Remove redundant IS_ERR() check in trace_pipe_open()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2:
- core: fix subdev sensor ownership
- subdev: Allow accessing routes with STREAMS client capability
- ctrls: Add validation for HEVC active reference counts and
background detection control
- common: Add YUV24 format info and has_alpha helper
- vb2: Change vb2_read() and vb2_write() return types to ssize_t
- i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)
- atmel-isc: remove deprecated driver
- cec: Add CEC Latency Indication Protocol (LIP) support
- imon: Add iMON VFD HID OEM v1.2 key mappings
- AVMatrix: new HWS capture driver
- isp4: new AMD capture driver
- qcom:
- iris: Add hierarchical coding, B-frame, and Long-Term Reference
support for encoder
- camss: Add SM6350 platform support
- venus: Add SM6115 platform support
- chips-media: wave5: Add support for Packed YUV422, CBP profile, and
background detection
- csi2rx: Add multistream support and 32 dma chans
- Several cleanups and fixes
* tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
media: qcom: iris: vdec: update size and stride calculations for 10bit formats
media: qcom: iris: gen2: add support for 10bit decoding
media: qcom: iris: add QC10C & P010 buffer size calculations
media: qcom: iris: add helpers for 8bit and 10bit formats
media: qcom: iris: Fix FPS calculation and VPP FW overhead
media: qcom: camss: vfe-340: Support for PIX client
media: qcom: camss: vfe-340: Proper client handling
media: qcom: camss: csid-340: Enable PIX interface routing
media: qcom: camss: csid-340: Add port-to-interface mapping
media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
media: iris: Initialize HFI ops after firmware load in core init
media: iris: drop struct iris_fmt
media: iris: Add platform data for X1P42100
media: iris: Add hardware power on/off ops for X1P42100
media: iris: optimize COMV buffer allocation for VPU3x and VPU4x
media: iris: add FPS calculation and VPP FW overhead in frequency formula
media: qcom: iris: Simplify COMV size calculation
...
|
|
strncpy() has been a persistent source of bugs due to its ambiguous
intended usage and frequently counter-intuitive semantics: it may not
NUL-terminate the destination, and it unconditionally zero-pads to the
full length, which isn't always needed. All former callers have been
migrated[1] to:
- strscpy() for NUL-terminated destinations
- strscpy_pad() for NUL-terminated destinations needing zero-padding
- strtomem_pad() for non-NUL-terminated fixed-width fields
- memcpy_and_pad() for bounded copies with explicit padding
- memcpy() for known-length copies
Remove the generic implementation, its declaration, the FORTIFY_SOURCE
wrapper, and associated tests.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add OF helpers for parsing the power-domains-child-ids property
- Extend the power domain DT binding with power-domains-child-ids
- Switch to use the dynamic root device
pmdomain providers:
- arm: Add support for domain hierarchies to SCMI power domains
- qcom: Add power domains for the Shikra and Nord SoCs
- sunxi: Fix GPU support on Radxa Cubie A7Z by keeping power domain on"
* tag 'pmdomain-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: fix unused variable warning with !PM_GENERIC_DOMAINS_OF
pmdomain: core: fix early domain registration
pmdomain: mediatek: mfg: move __packed after struct name to fix kernel-doc
pmdomain: qcom: rpmpd: Add Shikra RPM Power Domains
pmdomain: qcom: rpmhpd: Add power domains for Nord SoC
dt-bindings: power: qcom,rpmpd: document the Shikra RPM Power Domains
pmdomain: sunxi: support power domain flags for pck600
pmdomain: core: switch to dynamic root device
pmdomain: qcom: Unify user-visible "Qualcomm" name
dt-bindings: power: qcom,rpmhpd: Add RPMh power domain for Nord SoC
dt-bindings: power: qcom,rpmhpd: Fix whitespace in RPMHPD defines
pmdomain: arm_scmi: add support for domain hierarchies
pmdomain: core: add support for power-domains-child-ids
dt-bindings: power: Add power-domains-child-ids property
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add new generic callbacks to populate per-pin pin controllers
creating groups and functions from the device tree building out
pinctrl_generic_to_map() and move the Spacemit driver over to use
this
- Generic board-level pin control driver using the mux framework
New pin controller drivers:
- Amlogic (meson) A9 SoC
- Aspeed AST2700 SoC0 and SoC1
- nVidia Tegra264 and Tegra238
- Qualcomm Nord TLMM, Shikra TLMM, SM6350 LPASS LPI, and IPQ9650 TLMM
- Renesas RZ/G3L SoC
- UltraRISC DP1000
Improvements:
- Handle pull up/pull down properly in the Renesas RZG2L driver
- Fix up nVidia Tegra 234 DT bindings
- Fix up pin definitions in the Qualcomm Eliza driver
- Qualcomm PM8010 GPIO support in the PM8010
- Qualcomm SM6115 EGPIO support in the SM6115
- Switch Qualcomm LPASS LPI drivers to use runtime PM for power
management
- Clean up the Qualcomm Kconfig business a bit to include the
necessary drivers for each subarch
- Fix output glitch in the Amlogic (meson) A4 pin controller
- Move the Airoha driver from the Mediatek directory to its own
directory. It is too different from other Mediatek hardware
- A slew of fixes to the Airoha AN7581 and AN7583 drivers"
* tag 'pinctrl-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (151 commits)
pinctrl: Export pinctrl_get_group_selector()
pinctrl: Match DT helper types
pinctrl: qcom: Register functions before enabling pinctrl
pinctrl: meson: amlogic-a4: use nolock get range
pinctrl: ultrarisc: Add UltraRISC DP1000 pinctrl driver
dt-bindings: pinctrl: Add UltraRISC DP1000 pinctrl controller
pinctrl: qcom: Remove unused macro definitions
pinctrl: tegra: PINCTRL_TEGRA264 should depend on ARCH_TEGRA
pinctrl: tegra: PINCTRL_TEGRA238 should depend on ARCH_TEGRA
pinctrl: tegra238: add missing AON pin groups
dt-bindings: pinctrl: tegra238: add missing AON pin groups
pinctrl: airoha: an7583: remove undefined groups from pcm_spi pin function
pinctrl: airoha: an7583: fix phy1_led1 pin function
pinctrl: airoha: an7583: add missed gpio22 pin group
pinctrl: airoha: an7583: fix gpio21 pin group
pinctrl: airoha: fix pwm pin function for an7581 and an7583
pinctrl: airoha: an7583: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7581: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7583: fix misprint in gpio19 pinconf
pinctrl: airoha: an7581: fix misprint in gpio19 pinconf
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
includes flash and RGB LED controllers
- Texas Instruments:
- LP5812: Add support for the TI LP5812 LED driver
- LP5860: Add support for the Texas Instruments LP5860 LED matrix
driver via SPI
Improvements & Fixes:
- Core:
- Adjust the brightness sysfs node documentation to clarify that
only decimal values are accepted
- Fix a race condition in the software blink logic when stopping
blinking and setting brightness simultaneously
- Introduce the `multi_max_intensity` sysfs attribute for
multicolor LEDs to support hardware-based global brightness
control
- Replace OF-based device lookup with firmware node equivalents
to support ACPI and software nodes
- Return `ENODATA` when reading brightness from
hardware-controlled LEDs
- Set the coherent DMA mask to zero for the Samsung PMIC device
to suppress unnecessary "DMA mask not set" messages
- ams OSRAM AS3668: Fix a Kconfig symbol name mismatch in the
Makefile that prevented the driver from being built
- BlinkM: Fix spelling and comment style issues in the driver
- DAC124S085: Declare the SPI command word as `__le16` to ensure
correct endianness and pass sparse checks
- GPIO Trigger: Use `GPIOD_FLAGS_BIT_NONEXCLUSIVE` to allow sharing
GPIOs between the LED trigger and other drivers
- NXP PCA9532: Fix an issue where the LED would stop blinking when
changing brightness to a non-zero value
- Qualcomm: Unify the user-visible company name to "Qualcomm" across
flash LED config options
- Qualcomm LPG: Optimize memory allocation by combining main
structure and channels into a single allocation using flexible
array members
- Texas Instruments
- LP5860: Add missing `CONFIG_OF` dependency to prevent build
warnings
- TPS6131x: Increase the overvoltage protection threshold to 6V
to avoid false triggers with 5V input supplies
- Userspace LEDs (uLEDs):
- Fix a potential buffer overread by using `strnchr()` for name
string validation
- Return `-EFAULT` on `copy_to_user()` failure to properly handle
read errors
Cleanups & Refactoring:
- Core:
- Convert various `i2c_device_id` arrays to use named
initializers for improved robustness and readability
- Multi-color: Fix incorrect `KernelVersion` and `Date` tags for
the `multi_max_intensity` ABI
- Broadcom BCM63138 / ChromeOS EC: Move `MODULE_DEVICE_TABLE`
declarations next to the ID tables for consistency
- LP5812: Fix a sysfs ABI reference in the documentation
- ST1202: Remove an unused legacy GPIO header include
Device Tree Binding Updates:
- Class: Document the keyboard backlight LED class naming
conventions, including a new scheme for zoned backlights
- Core: Dual-license the common LED bindings header under GPLv2
and BSD-2-Clause
- IR SPI LED: Add a new 30% duty-cycle value for the IR transmitter
used in Xiaomi Redmi Note 8
- Samsung S2M series:
- Document the flash LED device bindings for Samsung S2M series
PMICs
- Document the pattern behavior for Samsung S2M series PMIC RGB
- S2MU005: Add device tree bindings for the S2MU005 PMIC,
including its flash and RGB LED sub-devices
- TI LM3560: Document the TI LM3559 and LM3560 synchronous boost
flash drivers"
* tag 'leds-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
leds: tps6131x: Increase overvoltage protection threshold to 6V
leds: Fix sysfs ABI date
leds: Fix CONFIG_OF dependency for LEDS_LP5860_CORE
leds: uleds: Fix potential buffer overread
leds: Use named initializers for arrays of i2c_device_data
leds: uleds: Return -EFAULT on copy_to_user() failure
leds: core: Report ENODATA for brightness of hardware controlled LED
leds: class: Use firmware nodes for device lookup
Documentation: leds: Document pattern behavior of Samsung S2M series PMIC RGB LEDs
leds: rgb: Add support for Samsung S2M series PMIC RGB LED device
leds: flash: Add support for Samsung S2M series PMIC flash LED device
dt-bindings: leds: Document Samsung S2M series PMIC flash LED device
leds: core: Fix race condition for software blink
leds: Adjust documentation of brightness sysfs node
leds: dac124s085: Declare SPI command word as __le16
leds: Introduce the multi_max_intensity sysfs attribute
dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver
leds: bcm63138/cros_ec: Move MODULE_DEVICE_TABLE next to the table itself
leds: Add support for TI LP5860 LED driver chip
Documentation: leds: leds-class: Document keyboard backlight LED class naming
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Renesas RSMU: Add support for the IDT 8a34002 Clock Matrix
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
includes charger, MUIC, flash and RGB LED controllers
- SpacemiT P1: Add a reboot cell for the SpacemiT P1 chip
- Texas Instruments BQ25792: Add support for the TI BQ25792 charger
manager
Improvements & Fixes:
- Core: Unify the user-visible company name to "Qualcomm" across
various config options
- ChromeOS EC:
- Delay `dev_set_drvdata()` until the probe process has
successfully completed to avoid use-after-free issues
- Prevent adding `cros_ec_ucsi` as an MFD sub-device if it is
already defined in Device Tree or ACPI
- Cirrus Logic CS42L43: Add a sanity check for firmware size to
prevent out-of-bounds memory access during firmware loading
- Cirrus Logic CS5535: Associate the GPIO cell with a dedicated
software node to support board files requesting GPIOs
- Maxim MAX77620: Modernize poweroff handling by converting to the
sys-off API
- Qualcomm RPM: Add the missing QDSS clock resource for the MSM8960
SoC
- Renesas RSMU: Fix page register setup for the 8A3400x family by
correctly calculating the page address
- Renesas RZ/MTU3:
- Make the reset line optional to support newer SoC variants
(RZ/T2H, RZ/N2H)
- Modernize the driver by using device-managed APIs for reset
control and device addition
- Samsung Core: Set the coherent DMA mask to zero for the Samsung
PMIC device to suppress unnecessary "DMA mask not set" messages
- Silicon Motion SM501: Fix a reference leak on failed device
registration by properly dropping the platform device reference
- Texas Instruments:
- TPS65219: Make poweroff handler registration conditional on the
"system-power-controller" Device Tree property
- TPS6586x: Fix Device Tree node reference counting by manually
bumping the refcount for sub-devices
- TPS65910: Add return value checking for the dummy I2C transfer
used to work around silicon erratum SWCZ010
- TWL4030: Update board-specific checks to use Device Tree
compatibles instead of legacy machine IDs
Cleanups & Refactoring:
- Core: Consistently define `pci_device_id` arrays using named
initializers across various Intel and Silicon Motion drivers
- Maintainers: Shift maintenance of Samsung PMIC drivers to André
Draszik
- Maxim MAX77759: Improve code style by reformatting the IRQ table
and refining macro comments
- MEN MENF21BMC / Texas Instruments TWL: Correctly treat
`i2c_check_functionality()` as returning a boolean status
- Rohm BD72720: Drop the non-existent BUCK11 ID to improve code
clarity
- Silicon Labs Si476x: Fix various spelling mistakes in driver
comments
- Spreadtrum SC27xx: Transition to `devm_mfd_add_devices()` and
separate MFD cell tables for each PMIC model
- Timberdale: Move GPIO pin definitions into the driver and
transition to using a software node for the GPIO cell
- Wolfson WM8994: Remove dead legacy-GPIO code and its associated
`irq_gpio` member
Device Tree Binding Updates:
- Aspeed AST2x00: Document the AST2700 SCU0 and add support for its
SoC0/SoC1 pin controllers
- Hisilicon Hi655x: Convert the Hi655x PMIC binding from text format
to YAML DT schema
- Khadas MCU: Add a new compatible and fan-supply property for the
Khadas VIM4 MCU
- MediaTek MT6397: Add support for the MT6365 PMIC and document
regulator supplies for the MT6359 variant
- Qualcomm TCSR: Add compatibles for Nord and IPQ5210 TCSR blocks
- Renesas RZ/G3L: Revert the addition of the
`renesas,r9a08g046-lvds-cmn` compatible string due to documentation
errors
- Samsung S2MU005: Document the S2MU005 PMIC and its sub-devices
(charger, MUIC, flash and RGB LEDs)
- Spreadtrum SC2731: Include regulator bindings for the SC2730
variant
- STMPE: Fix the schema by marking 'compatible' and '#pwm-cells' as
required for the PWM subnode
- Texas Instruments BQ257xx: Expand the BQ25703A binding to include
the BQ25792 variant
Removals:
- Motorola EZX PCAP: Remove the unused and non-functional driver for
Motorola EZX phones"
* tag 'mfd-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (47 commits)
dt-bindings: mfd: syscon: Revert renesas,r9a08g046-lvds-cmn
dt-bindings: mfd: st,stmpe: Add missing properties for PWM subnode
mfd: rz-mtu3: Make reset optional
mfd: rz-mtu3: Store &pdev->dev in local variable
mfd: rz-mtu3: Use local variable for reset
mfd: rz-mtu3: Use device-managed APIs
dt-bindings: mfd: aspeed,ast2x00-scu: Support AST2700 SoC1 pinctrl
mfd: tps6586x: Fix OF node refcount
dt-bindings: mfd: sprd,sc2731: Include SC2730 regulator bindings
mfd: twl4030-power: Update checks for specific boards to use the DT
dt-bindings: mfd: qcom,tcsr: Document the IPQ5210 TCSR block
mfd: qcom_rpm: Add msm8960 QDSS clock resource
mfd: si476x-i2c: Fix spelling mistakes in comments
mfd: max77620: Convert poweroff support to sys-off API
mfd: dt-bindings: mt6397: Add regulator supplies
dt-bindings: mfd: mediatek: mt6397: Add MT6365 PMIC support
dt-bindings: mfd: mediatek: mt6397: Add rtc for MT6359
mfd: cs42l43: Sanity check firmware size
mfd: qcom: Unify user-visible "Qualcomm" name
mfd: cros_ec: Delay dev_set_drvdata() until probe success
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- A major rework of the fast commit mechanism to avoid lock contention
and deadlocks. We also export snapshot statistics in
/proc/fs/ext4/*/fc_info
- Performance optimization for directory hash computation by processing
input in 4-byte chunks and removing function pointers, along with new
KUnit tests for directory hash
- Cleanups in JBD2 to remove special slabs and use kmalloc() instead
- Various bug fixes, including:
- Early validation of donor superblock in EXT4_IOC_MOVE_EXT to
avoid cross-fs deadlock
- Fix for a kernel BUG in ext4_write_inline_data_end under
data=journal
- Fix for a NULL dereference in jbd2_journal_dirty_metadata when
handle is aborted
- Fix for an underflow in JBD2 fast commit block initialization
check
- Fix for LOGFLUSH shutdown ordering to ensure ordered data
writeback
- Miscellaneous fixes for error path return values and KUnit
assertions
* tag 'ext4_for_linus-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT
ext4: fix kernel BUG in ext4_write_inline_data_end
ext4: fix ERR_PTR(0) in ext4_mkdir()
jbd2: remove special jbd2 slabs
ext4: remove mention of PageWriteback
ext4: improve str2hashbuf by processing 4-byte chunks and removing function pointers
ext4: add Kunit coverage for directory hash computation
ext4: fast commit: export snapshot stats in fc_info
ext4: fast commit: add lock_updates tracepoint
ext4: fast commit: avoid i_data_sem by dropping ext4_map_blocks() in snapshots
ext4: fast commit: avoid self-deadlock in inode snapshotting
ext4: fast commit: avoid waiting for FC_COMMITTING
ext4: lockdep: handle i_data_sem subclassing for special inodes
ext4: fast commit: snapshot inode state before writing log
jbd2: fix integer underflow in jbd2_journal_initialize_fast_commit()
ext4: fix fast commit wait/wake bit mapping on 64-bit
jbd2: check for aborted handle in jbd2_journal_dirty_metadata()
ext4: Use %pe to print PTR_ERR()
ext4: fix LOGFLUSH shutdown ordering to allow ordered-mode data writeback
ext4: replace KUnit tests for memcmp() with KUNIT_ASSERT_MEMEQ()
|
|
Pull nfsd updates from Chuck Lever:
"Jeff Layton wired up netlink upcalls for the auth.unix.ip and
auth.unix.gid caches in SunRPC and the svc_export and nfsd.fh caches
in NFSD. The new kernel-user API is more extensible and lays the
groundwork for retiring the old pipe interface.
The default NFS r/w block size rises to 4MB on hosts with at least
16GB of RAM, reducing per-RPC overhead on fast networks. Smaller
machines keep their previously computed default, and the value remains
tunable through /proc/fs/nfsd/max_block_size.
Chuck Lever converted the server's RPCSEC GSS Kerberos code to the
kernel's shared crypto/krb5 library. The conversion retires and
removes SunRPC's bespoke implementation of Kerberos v5, but keeps
RPCSEC GSS-API.
Continuing the xdrgen migration that converted the NLMv4 server XDR
layer in v7.1, Chuck Lever converted the NLM version 3 server-side XDR
layer from hand-written C to xdrgen-generated code. As with the NLMv4
conversion in v7.1, the goals are improved memory safety, lower
maintenance burden, and groundwork for generation of Rust code for
this layer instead of C.
Chuck Lever fixed an issue where lingering NFSv4 state pins a mounted
file system after it is unexported. A new netlink-based mechanism can
now release NLM locks and NFSv4 state by client address, by
filesystem, and by export. Now an administrator can quiesce an export
cleanly before unmounting it.
The remaining patches are bug fixes, clean-ups, and minor
optimizations, including a batch of memory-leak and use-after-free
fixes in the ACL, lockd, and TLS handshake paths, many of them
reported by Chris Mason. Sincere thanks to all contributors,
reviewers, testers, and bug reporters who participated in the v7.2
NFSD development cycle"
* tag 'nfsd-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (106 commits)
svcrdma: wake sq waiters when the transport closes
nfsd: reset write verifier on deferred writeback errors
nfsd: avoid leaking pre-allocated openowner on unconfirmed retry race
sunrpc: wait for in-flight TLS handshake callback when cancel loses race
sunrpc: pin svc_xprt across the asynchronous TLS handshake callback
nfsd: fix posix_acl leak on SETACL decode failure
nfsd: fix posix_acl leak and ignored error in nfsd4_create_file
nfsd: check get_user() return when reading princhashlen
nfsd: fix inverted cp_ttl check in async copy reaper
nfsd: fix dead ACL conflict guard in nfsd4_create
NFSD: Fix SECINFO_NO_NAME decode error cleanup
sunrpc: harden rq_procinfo lifecycle to prevent double-free
SUNRPC: Return an error from xdr_buf_to_bvec() on overflow
SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing
nfsd: release layout stid on setlease failure
lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file()
lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure
lockd: Plug nlm_file leak when nlm_do_fopen() fails
Revert "NFSD: Defer sub-object cleanup in export put callbacks"
Revert "svcrdma: Use contiguous pages for RDMA Read sink buffers"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix lots of bugs, most from the late 6.x era, but some going back
to 2.6.x
- Add subsystems (io-uring, passthrough) and respective maintainers
(Bernd, Joanne and Amir)
- Separate transport and fs layers (Miklos)
- Don't block on cat /dev/fuse (Joanne)
- Perform some refactoring in fuse-uring (Joanne)
- Don't use bounce-buffer for READDIR reply in virtio-fs (Matthew Ochs)
- Clean up documentation (Randy)
- Improve tracing (Amir)
- Extend page cache invalidation after DIO (Cheng Ding)
- Invalidate readdir cache on epoch change (Jun Wu)
- Misc cleanups
* tag 'fuse-update-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (81 commits)
fuse-uring: clear ent->fuse_req in commit_fetch error path
fuse-uring: use named constants for io-uring iovec indices
fuse-uring: refactor setting up copy state for payload copying
fuse-uring: use enum types for header copying
fuse-uring: refactor io-uring header copying from ring
fuse-uring: refactor io-uring header copying to ring
fuse-uring: separate next request fetching from sending logic
fuse: invalidate readdir cache on epoch bump
virtio-fs: avoid double-free on failed queue setup
fuse: invalidate page cache after DIO and async DIO writes
fuse: set ff->flock only on success
fuse: clean up interrupt reading
fuse: remove stray newline in fuse_dev_do_read()
fuse: use READ_ONCE in fuse_chan_num_background()
fuse: dax: Move long delayed work on system_dfl_long_wq
fuse: add fuse_request_sent tracepoint
fuse: Add SPDX ID lines to some files
fuse: use QSTR() instead of QSTR_INIT() in fuse_get_dentry
fuse: convert page array allocation to kcalloc()
fuse: use current creds for backing files
...
|
