| Age | Commit message (Collapse) | Author |
|---|
|
Merge series from David Lechner <dlechner@baylibre.com>:
We have a pending major version bump for the axi-spi-engine so to
prepare for that, improve the existing version checks for feature
enablement.
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-subsystem Changes:
- iopoll: Generalize read_poll_timeout() into poll_timeout_us() (Ville)
Non-display related:
- PREEMPT_RT fix (Sebastian)
- Replace DRM_DEBUG_SELFTEST with DRM_KUNIT_TEST (Ruben, Imre)
- Some changes oeveral like in RPS, SoC, debugfs targeting display separation (Jani)
Display related:
- General refactor in favor of intel_display (Suraj)
- Prune modes for YUV420 (Suraj)
- Reject HBR3 in any eDP Panel (Ankit)
- Change AUX DPCD probe address (Imre)
- Display Wa fix, additions, and updates (Ankit, Vinod, Nemesa, Suraj, Jouni))
- DP: Fix 2.7 Gbps link training on g4x (Ville)
- DP: Adjust the idle pattern handling (Ville)
- DP: Shuffle the link training code a bit (Ville)
- Don't set/read the DSI C clock divider on GLK (Ville)
- Precompute plane SURF address/etc (Ville)
- Enable_psr kernel parameter changes (Jouni)
- PHY LFPS sending configuration fixes (Jouni)
- Fix dma_fence_wait_timeout() return value handling (Aakash)
- DP: Fix disabling training pattern (Imre)
- Small code clean-ups (Gustavo, Colin, Jani, Juha-Pekka)
- Change vblank log from err to debug (Suraj)
- More display clean-up towards intel_display split (Jani)
- Use the recomended min_hblank values (Arun)
- Block hpd during suspend (Dibin)
- DSI: Fix overflow issue in pclk parsing (Jouni)
- PSR: Do not trigger Frame Change events from frontbuffer flush (Jouni)
- VBT cleanups and new fields (Jani, Suraj)
- Type-C enabled/disconnected dp-alt sink (Imre)
- Optimize panel power-on wait time (Dibin)
- Wildcat Lake enabling (Imre, Chaitanya)
- DP HDR updates (Chaitanya)
- Fix divide by 0 error in i9xx_set_backlight (Suraj)
- Fixes for PSR (Jouni)
- Remove the encoder check in hdcp enable (Suraj)
- Control HDMI output bpc (Lee)
- Fix possible overflow on tc power (Mika)
- Convert code towards poll_timeout_* (Jani)
- Use REG_BIT on FW_BLC_SELF_* macros (Luca)
- ALPM LFPS and silence period calculation (Jouni)
- Remove power state verification before HW readout (Imre)
- Fix HPD mtp_tc_hpd_enable_detection (Ville)
- DRAM detection (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aLtc-gk3jhwcWxZh@intel.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
* tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits)
wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table
wifi: cfg80211: Remove the redundant wiphy_dev
wifi: mac80211: fix incorrect comment
wifi: cfg80211: update the time stamps in hidden ssid
wifi: mac80211: Fix HE capabilities element check
wifi: mac80211: add tx_handlers_drop statistics to ethtool
wifi: mac80211: fix reporting of all valid links in sta_set_sinfo()
wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported
wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1
wifi: iwlwifi: mld: remove support from of sta cmd version 1
wifi: iwlwifi: mld: remove support of roc cmd version 5
wifi: iwlwifi: mld: remove support of mac cmd ver 2
wifi: iwlwifi: mld: don't consider phy cmd version 5
wifi: iwlwifi: implement wowlan status notification API update
wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list
wifi: iwlwifi: add kunit tests for nvm parse
wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags
wifi: iwlwifi: pcie: move ltr_enabled to the specific transport
wifi: iwlwifi: pcie: move pm_support to the specific transport
wifi: iwlwifi: rename iwl_finish_nic_init
...
====================
Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove stubs for fixed_phy_set_link_update() and
fixed_phy_change_carrier() because all callers
(actually just one per function) select config
symbol FIXED_PHY.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/8729170d-cf39-48d9-aabc-c9aa4acda070@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce new DMA mapping functions dma_map_phys() and dma_unmap_phys()
that operate directly on physical addresses instead of page+offset
parameters. This provides a more efficient interface for drivers that
already have physical addresses available.
The new functions are implemented as the primary mapping layer, with
the existing dma_map_page_attrs()/dma_map_resource() and
dma_unmap_page_attrs()/dma_unmap_resource() functions converted to simple
wrappers around the phys-based implementations.
In case dma_map_page_attrs(), the struct page is converted to physical
address with help of page_to_phys() function and dma_map_resource()
provides physical address as is together with addition of DMA_ATTR_MMIO
attribute.
The old page-based API is preserved in mapping.c to ensure that existing
code won't be affected by changing EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
variant for dma_*map_phys().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/54cc52af91777906bbe4a386113437ba0bcfba9c.1757423202.git.leonro@nvidia.com
|
|
Convert the KMSAN DMA handling function from page-based to physical
address-based interface.
The refactoring renames kmsan_handle_dma() parameters from accepting
(struct page *page, size_t offset, size_t size) to (phys_addr_t phys,
size_t size). The existing semantics where callers are expected to
provide only kmap memory is continued here.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/3557cbaf66e935bc794f37d2b891ef75cbf2c80c.1757423202.git.leonro@nvidia.com
|
|
Convert the DMA direct mapping functions to accept physical addresses
directly instead of page+offset parameters. The functions were already
operating on physical addresses internally, so this change eliminates
the redundant page-to-physical conversion at the API boundary.
The functions dma_direct_map_page() and dma_direct_unmap_page() are
renamed to dma_direct_map_phys() and dma_direct_unmap_phys() respectively,
with their calling convention changed from (struct page *page,
unsigned long offset) to (phys_addr_t phys).
Architecture-specific functions arch_dma_map_page_direct() and
arch_dma_unmap_page_direct() are similarly renamed to
arch_dma_map_phys_direct() and arch_dma_unmap_phys_direct().
The is_pci_p2pdma_page() checks are replaced with DMA_ATTR_MMIO checks
to allow integration with dma_direct_map_resource and dma_direct_map_phys()
is extended to support MMIO path either.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/bb15a22f76dc2e26683333ff54e789606cfbfcf0.1757423202.git.leonro@nvidia.com
|
|
Rename the IOMMU DMA mapping functions to better reflect their actual
calling convention. The functions iommu_dma_map_page() and
iommu_dma_unmap_page() are renamed to iommu_dma_map_phys() and
iommu_dma_unmap_phys() respectively, as they already operate on physical
addresses rather than page structures.
The calling convention changes from accepting (struct page *page,
unsigned long offset) to (phys_addr_t phys), which eliminates the need
for page-to-physical address conversion within the functions. This
renaming prepares for the broader DMA API conversion from page-based
to physical address-based mapping throughout the kernel.
All callers are updated to pass physical addresses directly, including
dma_map_page_attrs(), scatterlist mapping functions, and DMA page
allocation helpers. The change simplifies the code by removing the
page_to_phys() + offset calculation that was previously done inside
the IOMMU functions.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/ed172f95f8f57782beae04f782813366894e98df.1757423202.git.leonro@nvidia.com
|
|
Convert the DMA debug infrastructure from page-based to physical address-based
mapping as a preparation to rely on physical address for DMA mapping routines.
The refactoring renames debug_dma_map_page() to debug_dma_map_phys() and
changes its signature to accept a phys_addr_t parameter instead of struct page
and offset. Similarly, debug_dma_unmap_page() becomes debug_dma_unmap_phys().
A new dma_debug_phy type is introduced to distinguish physical address mappings
from other debug entry types. All callers throughout the codebase are updated
to pass physical addresses directly, eliminating the need for page-to-physical
conversion in the debug layer.
This refactoring eliminates the need to convert between page pointers and
physical addresses in the debug layer, making the code more efficient and
consistent with the DMA mapping API's physical address focus.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
[mszyprow: added a fixup]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/56d1a6769b68dfcbf8b26a75a7329aeb8e3c3b6a.1757423202.git.leonro@nvidia.com
Link: https://lore.kernel.org/all/20250910052618.GH341237@unreal/
|
|
This patch introduces the DMA_ATTR_MMIO attribute to mark DMA buffers
that reside in memory-mapped I/O (MMIO) regions, such as device BARs
exposed through the host bridge, which are accessible for peer-to-peer
(P2P) DMA.
This attribute is especially useful for exporting device memory to other
devices for DMA without CPU involvement, and avoids unnecessary or
potentially detrimental CPU cache maintenance calls.
DMA_ATTR_MMIO is supposed to provide dma_map_resource() functionality
without need to call to special function and perform branching when
processing generic containers like bio_vec by the callers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/6f058ec395c5348014860dbc2eed348c17975843.1757423202.git.leonro@nvidia.com
|
|
Begin reporting arena page faults and the faulting address to BPF
program's stderr, this patch adds support in the arm64 and x86-64 JITs,
support for other archs can be added later.
The fault handlers receive the 32 bit address in the arena region so
the upper 32 bits of user_vm_start is added to it before printing the
address. This is what the user would expect to see as this is what is
printed by bpf_printk() is you pass it an address returned by
bpf_arena_alloc_pages();
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250911145808.58042-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF streams are only valid for the main programs, to make it easier to
access streams from subprogs, introduce main_prog_aux in struct
bpf_prog_aux.
prog->aux->main_prog_aux = prog->aux, for main programs and
prog->aux->main_prog_aux = main_prog->aux, for subprograms.
Make bpf_prog_find_from_stack() use the added main_prog_aux to return
the mainprog when a subprog is found on the stack.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move whole code from ice_fwlog.c/h to libie/fwlog.c/h.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
s/ice/libie
There is no function for filling default descriptor in libie. Zero
descriptor structure and set opcode without calling the function.
Make functions that are caled only in ice_fwlog.c static.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Copy the code and:
- change ICE_AQC to LIBIE_AQC
- change ice_aqc to libie_aqc
- move definitions outside the structures
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a version check function for checking ADI AXI IP core versions.
These cores use a semantic versioning scheme, so it is useful to have
a version check function that can check the minor version to enable
features in driver while maintaining backward compatibility.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250815-spi-axi-spi-enigne-improve-version-checks-v1-1-13bde357d5b6@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, netfilter and wireless.
We have an IPv6 routing regression with the relevant fix still a WiP.
This includes a last-minute revert to avoid more problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth:
- igb: fix NULL pointer dereference in ethtool loopback test
- i40e: fix Jumbo Frame support after iPXE boot
- macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
- can: j1939: implement NETDEV_UNREGISTER notification hanidler
- wifi: ath12k: fix WMI TLV header misalignment"
* tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
...
|
|
The mb() macro is used in this header:
In file included from include/linux/mtd/qinfo.h:5,
from include/linux/mtd/pfow.h:8,
from drivers/mtd/lpddr/lpddr_cmds.c:14:
include/linux/mtd/map.h: In function 'inline_map_write':
include/linux/mtd/map.h:428:9: error: implicit declaration of function 'mb' [-Wimplicit-function-declaration]
Fixes: 56eb7c13b97c ("mtd: map: Don't use "proxy" headers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a nasty hibernation regression introduced during the 6.16
cycle, an issue related to energy model management occurring on Intel
hybrid systems where some CPUs are offline to start with, and two
regressions in the amd-pstate driver:
- Restore a pm_restrict_gfp_mask() call in hibernation_snapshot()
that was removed incorrectly during the 6.16 development cycle
(Rafael Wysocki)
- Introduce a function for registering a perf domain without
triggering a system-wide CPU capacity update and make the
intel_pstate driver use it to avoid reocurring unsuccessful
attempts to update capacities of all CPUs in the system (Rafael
Wysocki)
- Fix setting of CPPC.min_perf in the active mode with performance
governor in the amd-pstate driver to restore its expected behavior
changed recently (Gautham Shenoy)
- Avoid mistakenly setting EPP to 0 in the amd-pstate driver after
system resume as a result of recent code changes (Mario
Limonciello)"
* tag 'pm-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
PM: EM: Add function for registering a PD without capacity update
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after resume
cpufreq/amd-pstate: Fix setting of CPPC.min_perf in active mode for performance governor
|
|
The Texas Instruments BQ25703A is an integrated charger manager and
boost converter.
The MFD driver initializes the device for the regulator driver
and power supply driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250904160530.66178-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This is to make it easier to debug issues with AV software, which time and
again deadlocks with no indication of where the issue comes from, and the
kernel being blamed for the deadlock. Then we need to analyze dumps to
prove that the kernel is not in fact at fault.
The deadlock comes from recursion: handling the event triggers another
permission event, in some roundabout way, obviously, otherwise it would
have been found in testing.
With this patch a warning is printed when permission event is received by
userspace but not answered for more than the timeout specified in
/proc/sys/fs/fanotify/watchdog_timeout. The watchdog can be turned off by
setting the timeout to zero (which is the default).
The timeout is very coarse (T <= t < 2T) but I guess it's good enough for
the purpose.
Overhead should be minimal.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20250909143053.112171-1-mszeredi@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa30 ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Recent changes to genpd prevents those PM domains being powered-on during
initialization from being powered-off during the boot sequence. Based upon
whether CONFIG_PM_CONFIG_PM_GENERIC_DOMAINS_OF is set of not, genpd relies
on the sync_state mechanism or the genpd_power_off_unused() (which is a
late_initcall_sync), to understand when it's okay to allow these PM domains
to be powered-off.
This new behaviour in genpd has lead to problems on different platforms.
Let's therefore restore the behavior of genpd_power_off_unused().
Moreover, let's introduce GENPD_FLAG_NO_STAY_ON, to allow genpd OF
providers to opt-out from the new behaviour.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/20250902-rk3576-lockup-regression-v1-1-c4a0c9daeb00@collabora.com/
Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add tee_shm_alloc_dma_mem() to allocate DMA memory. The memory is
represented by a tee_shm object using the new flag TEE_SHM_DMA_MEM to
identify it as DMA memory. The allocated memory will later be lent to
the TEE to be used as protected memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Add a userspace API to create a tee_shm object that refers to a dmabuf
reference.
Userspace registers the dmabuf file descriptor as in a tee_shm object.
The registration is completed with a tee_shm returned file descriptor.
Userspace is free to close the dmabuf file descriptor after it has been
registered since all the resources are now held via the new tee_shm
object.
Closing the tee_shm file descriptor will eventually release all
resources used by the tee_shm object when all references are released.
The new IOCTL, TEE_IOC_SHM_REGISTER_FD, supports dmabuf references to
physically contiguous memory buffers. Dmabuf references acquired from
the TEE DMA-heap can be used as protected memory for Secure Video Path
and such use cases. It depends on the TEE and the TEE driver if dmabuf
references acquired by other means can be used.
A new tee_shm flag is added to identify tee_shm objects built from a
registered dmabuf, TEE_SHM_DMA_BUF.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Olivier Masse <olivier.masse@nxp.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Implement DMA heap for protected DMA-buf allocation in the TEE
subsystem.
Protected memory refers to memory buffers behind a hardware enforced
firewall. It is not accessible to the kernel during normal circumstances
but rather only accessible to certain hardware IPs or CPUs executing in
higher or differently privileged mode than the kernel itself. This
interface allows to allocate and manage such protected memory buffers
via interaction with a TEE implementation.
The protected memory is allocated for a specific use-case, like Secure
Video Playback, Trusted UI, or Secure Video Recording where certain
hardware devices can access the memory.
The DMA-heaps are enabled explicitly by the TEE backend driver. The TEE
backend drivers needs to implement protected memory pool to manage the
protected memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 15 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 14 of these
fixes are for MM.
This includes
- kexec fixes from Breno for a recently introduced
use-uninitialized bug
- DAMON fixes from Quanmin Yan to avoid div-by-zero crashes
which can occur if the operator uses poorly-chosen insmod
parameters
and misc singleton fixes"
* tag 'mm-hotfixes-stable-2025-09-10-20-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add tree entry to numa memblocks and emulation block
mm/damon/sysfs: fix use-after-free in state_show()
proc: fix type confusion in pde_set_flags()
compiler-clang.h: define __SANITIZE_*__ macros only when undefined
mm/vmalloc, mm/kasan: respect gfp mask in kasan_populate_vmalloc()
ocfs2: fix recursive semaphore deadlock in fiemap call
mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory
mm/mremap: fix regression in vrm->new_addr check
percpu: fix race on alloc failed warning limit
mm/memory-failure: fix redundant updates for already poisoned pages
s390: kexec: initialize kexec_buf struct
riscv: kexec: initialize kexec_buf struct
arm64: kexec: initialize kexec_buf struct in load_other_segments()
mm/damon/reclaim: avoid divide-by-zero in damon_reclaim_apply_parameters()
mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters()
mm/damon/core: set quota->charged_from to jiffies at first charge window
mm/hugetlb: add missing hugetlb_lock in __unmap_hugepage_range()
init/main.c: fix boot time tracing crash
mm/memory_hotplug: fix hwpoisoned large folio handling in do_migrate_range()
mm/khugepaged: fix the address passed to notifier on testing young
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vmescape mitigation fixes from Dave Hansen:
"Mitigate vmscape issue with indirect branch predictor flushes.
vmscape is a vulnerability that essentially takes Spectre-v2 and
attacks host userspace from a guest. It particularly affects
hypervisors like QEMU.
Even if a hypervisor may not have any sensitive data like disk
encryption keys, guest-userspace may be able to attack the
guest-kernel using the hypervisor as a confused deputy.
There are many ways to mitigate vmscape using the existing Spectre-v2
defenses like IBRS variants or the IBPB flushes. This series focuses
solely on IBPB because it works universally across vendors and all
vulnerable processors. Further work doing vendor and model-specific
optimizations can build on top of this if needed / wanted.
Do the normal issue mitigation dance:
- Add the CPU bug boilerplate
- Add a list of vulnerable CPUs
- Use IBPB to flush the branch predictors after running guests"
* tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmscape: Add old Intel CPUs to affected list
x86/vmscape: Warn when STIBP is disabled with SMT
x86/bugs: Move cpu_bugs_smt_update() down
x86/vmscape: Enable the mitigation
x86/vmscape: Add conditional IBPB mitigation
x86/vmscape: Enumerate VMSCAPE bug
Documentation/hw-vuln: Add VMSCAPE documentation
|
|
To ensure successful builds when CONFIG_IMX_SCMI_CPU_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_cpu_start()
- scmi_imx_cpu_started()
- scmi_imx_cpu_reset_vector_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
Fixes: 1055faa5d660 ("firmware: imx: Add i.MX95 SCMI CPU driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
To ensure successful builds when CONFIG_IMX_SCMI_LMM_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_lmm_operation()
- scmi_imx_lmm_info()
- scmi_imx_lmm_reset_vector_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
Fixes: 7242bbf418f0 ("firmware: imx: Add i.MX95 SCMI LMM driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
To ensure successful builds when CONFIG_IMX_SCMI_MISC_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_misc_ctrl_get()
- scmi_imx_misc_ctrl_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
This patch also drops the changes in commit 540c830212ed ("firmware: imx:
remove duplicate scmi_imx_misc_ctrl_get()").
The original change aimed to simplify the handling of optional features by
removing conditional stubs. However, the use of conditional stubs is
necessary when CONFIG_IMX_SCMI_MISC_DRV is n, while consumer driver is
set to y.
This is not a matter of preserving legacy patterns, but rather to ensure
that there is no link error whether for module or built-in.
Fixes: 0b4f8a68b292 ("firmware: imx: Add i.MX95 MISC driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In C, enumerated types do not have a defined size, apart from being
compatible with one of the standard types. This allows an ABI /
compiler to choose the type of an enum depending on the values it
needs to store, and storing larger values in it can lead to undefined
behaviour.
The tx_type and rx_filters members of struct kernel_ethtool_ts_info
are defined as enumerated types, but are bit arrays, where each bit
is defined by the enumerated type. This means they typically store
values in excess of the maximum value of the enumerated type, in
fact (1 << max_value) and thus must not be declared using the
enumated type.
Fix both of these to use u32, as per the corresponding __u32 UAPI type.
Fixes: 2111375b85ad ("net: Add struct kernel_ethtool_ts_info")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/E1uvMEK-00000003Amd-2pWR@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The channel-scale handling in iio_convert_raw_to_processed() in essence
does the following:
processed = raw * caller-provided-scale * channel-scale
Which can also be written as:
multiplier = raw * caller-provided-scale
iio-value = channel-scale
processed = multiplier * iio-value
Where iio-value is a set of IIO_VAL_* type + val + val2 integers, being
able to handle multiplication of iio-values like this is something
which is useful to have in general and, as previous bugfixes to
iio_convert_raw_to_processed() have shown, also tricky to implement.
Split the iio-value multiplication code from iio_convert_raw_to_processed()
out into a new iio_multiply_value() helper. This serves multiple purposes:
1. Having this split out allows writing a KUnit test for this.
2. Having this split out allows re-use to get better precision
when scaling values in iio_read_channel_processed_scale().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-4-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There are no Samsung Exynos SoC ADC driver users which bind via platform
ID, thus platform data is never set and can be dropped.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250830-s3c-cleanup-adc-v2-3-4f8299343d32@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
to cgroup.procs
The static usage pattern of creating a cgroup, enabling controllers,
and then seeding it with CLONE_INTO_CGROUP doesn't require write
locking cgroup_threadgroup_rwsem and thus doesn't benefit from this
patch.
To avoid affecting other users, the per threadgroup rwsem is only used
when the favordynmods is enabled.
As computer hardware advances, modern systems are typically equipped
with many CPU cores and large amounts of memory, enabling the deployment
of numerous applications. On such systems, container creation and
deletion become frequent operations, making cgroup process migration no
longer a cold path. This leads to noticeable contention with common
process operations such as fork, exec, and exit.
To alleviate the contention between cgroup process migration and
operations like process fork, this patch modifies lock to take the write
lock on signal_struct->group_rwsem when writing pid to
cgroup.procs/threads instead of holding a global write lock.
Cgroup process migration has historically relied on
signal_struct->group_rwsem to protect thread group integrity. In commit
<1ed1328792ff> ("sched, cgroup: replace signal_struct->group_rwsem with
a global percpu_rwsem"), this was changed to a global
cgroup_threadgroup_rwsem. The advantage of using a global lock was
simplified handling of process group migrations. This patch retains the
use of the global lock for protecting process group migration, while
reducing contention by using per thread group lock during
cgroup.procs/threads writes.
The locking behavior is as follows:
write cgroup.procs/threads | process fork,exec,exit | process group migration
------------------------------------------------------------------------------
cgroup_lock() | down_read(&g_rwsem) | cgroup_lock()
down_write(&p_rwsem) | down_read(&p_rwsem) | down_write(&g_rwsem)
critical section | critical section | critical section
up_write(&p_rwsem) | up_read(&p_rwsem) | up_write(&g_rwsem)
cgroup_unlock() | up_read(&g_rwsem) | cgroup_unlock()
g_rwsem denotes cgroup_threadgroup_rwsem, p_rwsem denotes
signal_struct->group_rwsem.
This patch eliminates contention between cgroup migration and fork
operations for threads that belong to different thread groups, thereby
reducing the long-tail latency of cgroup migrations and lowering system
load.
With this patch, under heavy fork and exec interference, the long-tail
latency of cgroup migration has been reduced from milliseconds to
microseconds. Under heavy cgroup migration interference, the multi-CPU
score of the spawn test case in UnixBench increased by 9%.
tj: Update comment in cgroup_favor_dynmods() and switch WARN_ONCE() to
pr_warn_once().
Signed-off-by: Yi Tao <escape@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Dynamic cgroup migration involving threadgroup locks can be in one of
two states: no lock held, or holding the global lock. Explicitly
declaring the different lock modes to make the code easier to
understand and facilitates future extensions of the lock modes.
Signed-off-by: Yi Tao <escape@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add scoped versions of fwnode child node iterators that automatically
handle reference counting cleanup using the __free() attribute:
- fwnode_for_each_child_node_scoped()
- fwnode_for_each_available_child_node_scoped()
These macros follow the same pattern as existing scoped iterators in the
kernel, ensuring fwnode references are automatically released when the
iterator variable goes out of scope. This prevents resource leaks and
eliminates the need for manual cleanup in error paths.
The implementation mirrors the non-scoped variants but uses
__free(fwnode_handle) for automatic resource management, providing a
safer and more convenient interface for drivers iterating over firmware
node children.
Signed-off-by: Jean-François Lessard <jefflessard3@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Catching up with some display dependencies.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
No functional changes are intended, some drivers like mdraid will split
bio by internal processing, prepare to unify bio split codes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio->issue_time_ns is initialized for every bio, however, it's only used
by blk-iolatency. Add a new queue_flag and only set this flag when
blk-iolatency is enabled, so that extra blk_time_get_ns() can be saved
for disks that blk-iolatency is not enabled.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that bio->bi_issue is only used by blk-iolatency to get bio issue
time, replace bio_issue with u64 time directly and remove bio_issue to
make code cleaner.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The intel_pstate driver manages CPU capacity changes itself and it does
not need an update of the capacity of all CPUs in the system to be
carried out after registering a PD.
Moreover, in some configurations (for instance, an SMT-capable
hybrid x86 system booted with nosmt in the kernel command line) the
em_check_capacity_update() call at the end of em_dev_register_perf_domain()
always fails and reschedules itself to run once again in 1 s, so
effectively it runs in vain every 1 s forever.
To address this, introduce a new variant of em_dev_register_perf_domain(),
called em_dev_register_pd_no_update(), that does not invoke
em_check_capacity_update(), and make intel_pstate use it instead of the
original.
Fixes: 7b010f9b9061 ("cpufreq: intel_pstate: EAS support for hybrid platforms")
Closes: https://lore.kernel.org/linux-pm/40212796-734c-4140-8a85-854f72b8144d@panix.com/
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since the generic debugfs interfaces for setting the periodic pulse
signal loopback have been added to the ptp_clock driver, so convert
the vendor-defined debugfs interfaces to the generic interfaces.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250905030711.1509648-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For some PTP devices, they have the capability to loop back the periodic
output signal for debugging, such as the ptp_qoriq device. So add the
generic interfaces to set the periodic output signal loopback, rather
than each vendor having a different implementation.
Show how many channels support the periodic output signal loopback:
$ cat /sys/kernel/debug/ptp<N>/n_perout_loopback
Enable the loopback of the periodic output signal of channel X:
$ echo <X> 1 > /sys/kernel/debug/ptp<N>/perout_loopback
Disable the loopback of the periodic output signal of channel X:
$ echo <X> 0 > /sys/kernel/debug/ptp<N>/perout_loopback
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250905030711.1509648-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selects which algorithm should be used by the NIC in order to decide rate of
CQE compression dependeng on PCIe bus conditions.
Supported values:
1) balanced, merges fewer CQEs, resulting in a moderate compression ratio
but maintaining a balance between bandwidth savings and performance
2) aggressive, merges more CQEs into a single entry, achieving a higher
compression rate and maximizing performance, particularly under high
traffic loads.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250907012953.301746-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We only need to consider data and metadata dma mapping types separately.
The request and bio integrity payload have enough flag bits to
internally track the mapping type for each. Use these so the caller
doesn't need to track them, and provide separete request and integrity
helpers to the common code. This will make it easier to scale new
mappings, like the proposed MMIO attribute, without burdening the caller
to track such things.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No more callers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No more callers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
