| Age | Commit message (Collapse) | Author |
|---|
|
The analysis is a basis for static liveness tracking mechanism
introduced by the next two commits.
A forward fixed-point analysis that tracks which frame's FP each
register value is derived from, and at what byte offset. This is
needed because a callee can receive a pointer to its caller's stack
frame (e.g. r1 = fp-16 at the call site), then do *(u64 *)(r1 + 0)
inside the callee — a cross-frame stack access that the callee's local
liveness must attribute to the caller's stack.
Each register holds an arg_track value from a three-level lattice:
- Precise {frame=N, off=[o1,o2,...]} — known frame index and
up to 4 concrete byte offsets
- Offset-imprecise {frame=N, off_cnt=0} — known frame, unknown offset
- Fully-imprecise {frame=ARG_IMPRECISE, mask=bitmask} — unknown frame,
mask says which frames might be involved
At CFG merge points the lattice moves toward imprecision (same
frame+offset stays precise, same frame different offsets merges offset
sets or becomes offset-imprecise, different frames become
fully-imprecise with OR'd bitmask).
The analysis also tracks spills/fills to the callee's own stack
(at_stack_in/out), so FP derived values spilled and reloaded.
This pass is run recursively per call site: when subprog A calls B
with specific FP-derived arguments, B is re-analyzed with those entry
args. The recursion follows analyze_subprog -> compute_subprog_args ->
(for each call insn) -> analyze_subprog. Subprogs that receive no
FP-derived args are skipped during recursion and analyzed
independently at depth 0.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-7-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Convert liveness bitmask type from u64 to spis_t, doubling the number
of trackable stack slots from 64 to 128 to support 4-byte granularity.
Each 8-byte SPI now maps to two consecutive 4-byte sub-slots in the
bitmask: spi*2 half and spi*2+1 half. In verifier.c,
check_stack_write_fixed_off() now reports 4-byte aligned writes of
4-byte writes as half-slot marks and 8-byte aligned 8-byte writes as
two slots. Similar logic applied in check_stack_read_fixed_off().
Queries (is_live_before) are not yet migrated to half-slot
granularity.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-4-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add helper functions for manipulating u64[2] bitmasks that represent
4-byte stack slot liveness. The 512-byte BPF stack is divided into
128 4-byte slots, requiring 128 bits (two u64s) to track.
These will be used by the static stack liveness analysis in the
next commit.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-3-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Subprogram name can be computed from function info and BTF, but it is
convenient to have the name readily available for logging purposes.
Update comment saying that bpf_subprog_info->start has to be the first
field, this is no longer true, relevant sites access .start field
by it's name.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-2-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Namely:
- bpf_subprog_is_global
- bpf_vlog_alignment
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-1-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Calvin reported an odd NMI watchdog lockup which claims that the CPU locked
up in user space. He provided a reproducer, which sets up a timerfd based
timer and then rearms it in a loop with an absolute expiry time of 1ns.
As the expiry time is in the past, the timer ends up as the first expiring
timer in the per CPU hrtimer base and the clockevent device is programmed
with the minimum delta value. If the machine is fast enough, this ends up
in a endless loop of programming the delta value to the minimum value
defined by the clock event device, before the timer interrupt can fire,
which starves the interrupt and consequently triggers the lockup detector
because the hrtimer callback of the lockup mechanism is never invoked.
As a first step to prevent this, avoid reprogramming the clock event device
when:
- a forced minimum delta event is pending
- the new expiry delta is less then or equal to the minimum delta
Thanks to Calvin for providing the reproducer and to Borislav for testing
and providing data from his Zen5 machine.
The problem is not limited to Zen5, but depending on the underlying
clock event device (e.g. TSC deadline timer on Intel) and the CPU speed
not necessarily observable.
This change serves only as the last resort and further changes will be made
to prevent this scenario earlier in the call chain as far as possible.
[ tglx: Updated to restore the old behaviour vs. !force and delta <= 0 and
fixed up the tick-broadcast handlers as pointed out by Borislav ]
Fixes: d316c57ff6bf ("[PATCH] clockevents: add core functionality")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Tested-by: Borislav Petkov <bp@alien8.de>
Link: https://lore.kernel.org/lkml/acMe-QZUel-bBYUh@mozart.vkv.me/
Link: https://patch.msgid.link/20260407083247.562657657@kernel.org
|
|
Now that scx_kfunc_context_filter enforces context-sensitive kfunc
restrictions at BPF load time, the per-task runtime enforcement via
scx_kf_mask is redundant. Remove it entirely:
- Delete enum scx_kf_mask, the kf_mask field on sched_ext_entity, and
the scx_kf_allow()/scx_kf_disallow()/scx_kf_allowed() helpers along
with the higher_bits()/highest_bit() helpers they used.
- Strip the @mask parameter (and the BUILD_BUG_ON checks) from the
SCX_CALL_OP[_RET]/SCX_CALL_OP_TASK[_RET]/SCX_CALL_OP_2TASKS_RET
macros and update every call site. Reflow call sites that were
wrapped only to fit the old 5-arg form and now collapse onto a single
line under ~100 cols.
- Remove the in-kfunc scx_kf_allowed() runtime checks from
scx_dsq_insert_preamble(), scx_dsq_move(), scx_bpf_dispatch_nr_slots(),
scx_bpf_dispatch_cancel(), scx_bpf_dsq_move_to_local___v2(),
scx_bpf_sub_dispatch(), scx_bpf_reenqueue_local(), and the per-call
guard inside select_cpu_from_kfunc().
scx_bpf_task_cgroup() and scx_kf_allowed_on_arg_tasks() were already
cleaned up in the "drop redundant rq-locked check" patch.
scx_kf_allowed_if_unlocked() was rewritten in the preceding "decouple"
patch. No further changes to those helpers here.
Co-developed-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
CIFS requires O_TMPFILE dentries to have names of newly created
delete-on-close files in the server so it can build full pathnames
from the root of the share when performing operations on them.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"The kernfs rbtree is keyed by (hash, ns, name) where the hash
is seeded with the raw namespace pointer via init_name_hash(ns).
The resulting hash values are exposed to userspace through
readdir seek positions, and the pointer-based ordering in
kernfs_name_compare() is observable through entry order.
Switch from raw pointers to ns_common::ns_id for both hashing
and comparison.
A preparatory commit first replaces all const void * namespace
parameters with const struct ns_common * throughout kernfs, sysfs,
and kobject so the code can access ns->ns_id. Also compare the
ns_id when hashes match in the rbtree to handle crafted collisions.
Also fix eventpoll RCU grace period issue and a cachefiles refcount
problem"
* tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
kernfs: make directory seek namespace-aware
kernfs: use namespace id instead of pointer for hashing and comparison
kernfs: pass struct ns_common instead of const void * for namespace tags
eventpoll: defer struct eventpoll free to RCU grace period
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
|
|
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add a con_id parameter to skl_int3472_register_led() to allow callers
to specify both the LED name suffix and lookup con_id instead of
hardcoding "privacy". This prepares for registering additional LED
types with different names.
While at it, rename the privacy LED's GPIO con_id from "privacy-led"
to "privacy" in int3472_get_con_id_and_polarity() and pass it
directly to skl_int3472_register_led(), reducing churn when adding
new LED types.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-4-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Rename the privacy LED type, struct member, and functions from "pled"
to "led" in preparation for supporting additional LED types beyond
just the privacy LED.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-3-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
'for-next/ttbr-macros-cleanup', 'for-next/kselftest', 'for-next/feat_lsui', 'for-next/mpam', 'for-next/hotplug-batched-tlbi', 'for-next/bbml2-fixes', 'for-next/sysreg', 'for-next/generic-entry' and 'for-next/acpi', remote-tracking branches 'arm64/for-next/perf' and 'arm64/for-next/read-once' into for-next/core
* arm64/for-next/perf:
: Perf updates
perf/arm-cmn: Fix resource_size_t printk specifier in arm_cmn_init_dtc()
perf/arm-cmn: Fix incorrect error check for devm_ioremap()
perf: add NVIDIA Tegra410 C2C PMU
perf: add NVIDIA Tegra410 CPU Memory Latency PMU
perf/arm_cspmu: nvidia: Add Tegra410 PCIE-TGT PMU
perf/arm_cspmu: nvidia: Add Tegra410 PCIE PMU
perf/arm_cspmu: Add arm_cspmu_acpi_dev_get
perf/arm_cspmu: nvidia: Add Tegra410 UCF PMU
perf/arm_cspmu: nvidia: Rename doc to Tegra241
perf/arm-cmn: Stop claiming entire iomem region
arm64: cpufeature: Use pmuv3_implemented() function
arm64: cpufeature: Make PMUVer and PerfMon unsigned
KVM: arm64: Read PMUVer as unsigned
* arm64/for-next/read-once:
: Fixes for __READ_ONCE() with CONFIG_LTO=y
arm64, compiler-context-analysis: Permit alias analysis through __READ_ONCE() with CONFIG_LTO=y
arm64: Optimize __READ_ONCE() with CONFIG_LTO=y
* for-next/misc:
: Miscellaneous cleanups/fixes
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
arm64: mm: Use generic enum pgtable_level
arm64: scs: Remove redundant save/restore of SCS SP on entry to/from EL0
arm64: remove ARCH_INLINE_*
* for-next/tlbflush:
: Refactor the arm64 TLB invalidation API and implementation
arm64: mm: __ptep_set_access_flags must hint correct TTL
arm64: mm: Provide level hint for flush_tlb_page()
arm64: mm: Wrap flush_tlb_page() around __do_flush_tlb_range()
arm64: mm: More flags for __flush_tlb_range()
arm64: mm: Refactor __flush_tlb_range() to take flags
arm64: mm: Refactor flush_tlb_page() to use __tlbi_level_asid()
arm64: mm: Simplify __flush_tlb_range_limit_excess()
arm64: mm: Simplify __TLBI_RANGE_NUM() macro
arm64: mm: Re-implement the __flush_tlb_range_op macro in C
arm64: mm: Inline __TLBI_VADDR_RANGE() into __tlbi_range()
arm64: mm: Push __TLBI_VADDR() into __tlbi_level()
arm64: mm: Implicitly invalidate user ASID based on TLBI operation
arm64: mm: Introduce a C wrapper for by-range TLB invalidation
arm64: mm: Re-implement the __tlbi_level macro as a C function
* for-next/ttbr-macros-cleanup:
: Cleanups of the TTBR1_* macros
arm64/mm: Directly use TTBRx_EL1_CnP
arm64/mm: Directly use TTBRx_EL1_ASID_MASK
arm64/mm: Describe TTBR1_BADDR_4852_OFFSET
* for-next/kselftest:
: arm64 kselftest updates
selftests/arm64: Implement cmpbr_sigill() to hwcap test
* for-next/feat_lsui:
: Futex support using FEAT_LSUI instructions to avoid toggling PAN
arm64: armv8_deprecated: Disable swp emulation when FEAT_LSUI present
arm64: Kconfig: Add support for LSUI
KVM: arm64: Use CAST instruction for swapping guest descriptor
arm64: futex: Support futex with FEAT_LSUI
arm64: futex: Refactor futex atomic operation
KVM: arm64: kselftest: set_id_regs: Add test for FEAT_LSUI
KVM: arm64: Expose FEAT_LSUI to guests
arm64: cpufeature: Add FEAT_LSUI
* for-next/mpam: (40 commits)
: Expose MPAM to user-space via resctrl:
: - Add architecture context-switch and hiding of the feature from KVM.
: - Add interface to allow MPAM to be exposed to user-space using resctrl.
: - Add errata workaoround for some existing platforms.
: - Add documentation for using MPAM and what shape of platforms can use resctrl
arm64: mpam: Add initial MPAM documentation
arm_mpam: Quirk CMN-650's CSU NRDY behaviour
arm_mpam: Add workaround for T241-MPAM-6
arm_mpam: Add workaround for T241-MPAM-4
arm_mpam: Add workaround for T241-MPAM-1
arm_mpam: Add quirk framework
arm_mpam: resctrl: Call resctrl_init() on platforms that can support resctrl
arm64: mpam: Select ARCH_HAS_CPU_RESCTRL
arm_mpam: resctrl: Add empty definitions for assorted resctrl functions
arm_mpam: resctrl: Update the rmid reallocation limit
arm_mpam: resctrl: Add resctrl_arch_rmid_read()
arm_mpam: resctrl: Allow resctrl to allocate monitors
arm_mpam: resctrl: Add support for csu counters
arm_mpam: resctrl: Add monitor initialisation and domain boilerplate
arm_mpam: resctrl: Add kunit test for control format conversions
arm_mpam: resctrl: Add support for 'MB' resource
arm_mpam: resctrl: Wait for cacheinfo to be ready
arm_mpam: resctrl: Add rmid index helpers
arm_mpam: resctrl: Convert to/from MPAMs fixed-point formats
arm_mpam: resctrl: Hide CDP emulation behind CONFIG_EXPERT
...
* for-next/hotplug-batched-tlbi:
: arm64/mm: Enable batched TLB flush in unmap_hotplug_range()
arm64/mm: Reject memory removal that splits a kernel leaf mapping
arm64/mm: Enable batched TLB flush in unmap_hotplug_range()
* for-next/bbml2-fixes:
: Fixes for realm guest and BBML2_NOABORT
arm64: mm: Remove pmd_sect() and pud_sect()
arm64: mm: Handle invalid large leaf mappings correctly
arm64: mm: Fix rodata=full block mapping support for realm guests
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update SMIDR_EL1 to DDI0601 2025-06
* for-next/generic-entry:
: More arm64 refactoring towards using the generic entry code
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
entry: Fix stale comment for irqentry_enter()
* for-next/acpi:
: arm64 ACPI updates
ACPI: AGDI: fix missing newline in error message
|
|
Add __regmap_init_i3c() and the corresponding regmap_init_i3c() macro to
allow creating a regmap for I3C devices without using the device-managed
version. This mirrors the pattern already established for other buses
such as I2C, SPI and so on, giving drivers more flexibility when
the regmap lifetime is not directly tied to the device.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/a81256a8866b163979a20406abf01df7d7440104.1775788105.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge power capping updates for 7.1-rc1:
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping core
code (Randy Dunlap)
* pm-powercap:
powercap: intel_rapl: Consolidate PL4 and PMU support flags into rapl_defaults
powercap: intel_rapl: Move MSR primitives to MSR driver
thermal: intel: int340x: processor: Move MMIO primitives to MMIO driver
powercap: intel_rapl: Move TPMI primitives to TPMI driver
powercap: intel_rapl: Move primitive info to header for interface drivers
powercap: intel_rapl: Remove unused macro definitions
powercap: intel_rapl: Move MSR default settings into MSR interface driver
powercap: intel_rapl: Remove unused AVERAGE_POWER primitive
powercap: correct kernel-doc function parameter names
thermal: intel: int340x: processor: Move RAPL defaults to MMIO driver
powercap: intel_rapl: Move TPMI default settings into TPMI interface driver
powercap: intel_rapl: Allow interface drivers to configure rapl_defaults
powercap: intel_rapl: Use unit conversion macros from units.h
powercap: intel_rapl: Use GENMASK() and BIT() macros
powercap: intel_rapl: Use shifts for power-of-2 operations
powercap: intel_rapl: Simplify rapl_compute_time_window_atom()
powercap: intel_rapl: Remove unused TIME_WINDOW macros
powercap: intel_rapl: Cleanup coding style
powercap: intel_rapl: Add a symbol namespace for intel_rapl exports
|
|
Merge cpufreq updates for 7.1-rc1:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic EPP,
Raw EPP, and new unit tests for them to amd-pstate (Gautham Shenoy,
Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate which
leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add a
boost_freq_req QoS request to save the boost constraint instead of
overwriting the last scaling_max_freq constraint (Pierre Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is written
to its status sysfs attribute while the driver is already off (Fabio
De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
* pm-cpufreq: (38 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
amd-pstate-ut: Add module parameter to select testcases
amd-pstate: Introduce a tracepoint trace_amd_pstate_cppc_req2()
amd-pstate: Add sysfs support for floor_freq and floor_count
amd-pstate: Add support for CPPC_REQ2 and FLOOR_PERF
x86/cpufeatures: Add AMD CPPC Performance Priority feature.
...
|
|
Daniel Borkmann says:
====================
netkit: Support for io_uring zero-copy and AF_XDP
Containers use virtual netdevs to route traffic from a physical netdev
in the host namespace. They do not have access to the physical netdev
in the host and thus can't use memory providers or AF_XDP that require
reconfiguring/restarting queues in the physical netdev.
This patchset adds the concept of queue leasing to virtual netdevs that
allow containers to use memory providers and AF_XDP at native speed.
Leased queues are bound to a real queue in a physical netdev and act
as a proxy.
Memory providers and AF_XDP operations take an ifindex and queue id,
so containers would pass in an ifindex for a virtual netdev and a queue
id of a leased queue, which then gets proxied to the underlying real
queue.
We have implemented support for this concept in netkit and tested the
latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504
(bnxt_en) 100G NICs. For more details see the individual patches.
====================
Link: https://patch.msgid.link/20260402231031.447597-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a netdevice notifier in netkit to watch for NETDEV_UNREGISTER events.
If the target device is indeed NETREG_UNREGISTERING and previously leased
a queue to a netkit device, then collect the related netkit devices and
batch-unregister_netdevice_many() them.
If this were not done, then the netkit device would hold a reference on
the physical device preventing it from going away. However, in case of
both io_uring zero-copy as well as AF_XDP this situation is handled
gracefully and the allocated resources are torn down.
In the case where mentioned infra is used through netkit, the applications
have a reference on netkit, and netkit in turn holds a reference on the
physical device. In order to have netkit release the reference on the
physical device, we need such watcher to then unregister the netkit ones.
This is generally quite similar to the dependency handling in case of
tunnels (e.g. vxlan bound to a underlying netdev) where the tunnel device
gets removed along with the physical device.
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[...]
# rmmod mlx5_ib
# rmmod mlx5_core
[...]
[ 309.261822] mlx5_core 0000:0a:00.0 mlx5_0: Port: 1 Link DOWN
[ 344.235236] mlx5_core 0000:0a:00.1: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.246948] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.463754] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.770155] mlx5_core 0000:0a:00.1: E-Switch: cleanup
[...]
# ip a
[...]
[ both enp10s0f0np0 and nk gone ]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-13-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_nl_queue_create_doit which creates a new rx queue in a
virtual netdev and then leases it to a rx queue in a physical netdev.
Example with ynl client:
# ynl --family netdev --output-json --do queue-create \
--json '{"ifindex": 8, "type": "rx", "lease": {"ifindex": 4, "queue": {"type": "rx", "id": 15}}}'
{'id': 1}
Note that the netdevice locking order is always from the virtual to
the physical device.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-3-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
dma-buf:
- fence: fix docs for dma_fence_unlock_irqrestore()
fb-helper:
- unlock in error path
gem-shmem:
- fix PMD write update
gem-vram:
- remove obsolete documentation
ivpu:
- fix device-recovery handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260409113921.GA181028@linux.fritz.box
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc8).
Conflicts:
net/ipv6/seg6_iptunnel.c
c3812651b522f ("seg6: separate dst_cache for input and output paths in seg6 lwtunnel")
78723a62b969a ("seg6: add per-route tunnel source address")
https://lore.kernel.org/adZhwtOYfo-0ImSa@sirena.org.uk
net/ipv4/icmp.c
fde29fd934932 ("ipv4: icmp: fix null-ptr-deref in icmp_build_probe()")
d98adfbdd5c01 ("ipv4: drop ipv6_stub usage and use direct function calls")
https://lore.kernel.org/adO3dccqnr6j-BL9@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/chain_mode.c
51f4e090b9f8 ("net: stmmac: fix integer underflow in chain mode")
6b4286e05508 ("net: stmmac: rename STMMAC_GET_ENTRY() -> STMMAC_NEXT_ENTRY()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge ACPI core driver core driver updates and assorted driver updates
related to ACPI support for 7.1-rc1:
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
* acpi-driver:
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: AC: Define ACPI_AC_CLASS in one place
ACPI: driver: Do not set acpi_device_class() unnecessarily
ACPI: driver: Avoid using pnp.device_class for netlink handling
ACPI: event: Redefine acpi_notifier_call_chain()
ACPI: driver: Do not set acpi_device_name() unnecessarily
ACPI: video: Consolidate pnp.bus_id workarounds handling
ACPI: video: Rework checking for duplicate video bus devices
driver core: auxiliary bus: Introduce dev_is_auxiliary()
ACPI: PAD: Rearrange notify handler installation and removal
ACPI: AC: Get rid of unnecessary declarations
|
|
Merge updates related to the CMOS RTC driver and x86/ACPI CMOS RTC
support for 7.1-rc1:
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a platform
device for the CMOS RTC, and drop CMOS RTC PNP device support (Rafael
Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
* acpi-cmos-rtc:
rtc: cmos: Do not require IRQ if ACPI alarm is used
rtc: cmos: Enable ACPI alarm if advertised in ACPI FADT
ACPI: TAD/x86: cmos_rtc: Consolidate address space handler setup
rtc: cmos: Drop PNP device support
x86: rtc: Drop PNP device check
ACPI: PNP: Drop CMOS RTC PNP device support
ACPI: x86/rtc-cmos: Use platform device for driver binding
ACPI: x86: cmos_rtc: Create a CMOS RTC platform device
ACPI: x86: cmos_rtc: Improve coordination with ACPI TAD driver
ACPI: x86: cmos_rtc: Clean up address space handler driver
|
|
Merge ACPI processor driver updates and ACPI CPPC library updates for
7.1-rc1:
- Address multiple assorted issues and clean up the code in the ACPI
processor idle driver (Huisong Li)
- Replace strlcat() in the ACPI processor idle drive with a better
alternative (Andy Shevchenko)
- Rearrange and clean up acpi_processor_errata_piix4() (Rafael Wysocki)
- Move reference performance to capabilities and fix an uninitialized
variable in the ACPI CPPC library (Pengjie Zhang)
- Add support for the Performance Limited Register to the ACPI CPPC
library (Sumit Gupta)
- Add cppc_get_perf() API to read performance controls, extend
cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
library warn on missing mandatory DESIRED_PERF register (Sumit Gupta)
- Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in target
callbacks to allow it to control performance bounds via standard
scaling_min_freq and scaling_max_freq sysfs attributes and add sysfs
documentation for the Performance Limited Register to it (Sumit Gupta)
* acpi-processor:
ACPI: processor: idle: Reset cpuidle on C-state list changes
cpuidle: Extract and export no-lock variants of cpuidle_unregister_device()
ACPI: processor: idle: Fix NULL pointer dereference in hotplug path
ACPI: processor: idle: Reset power_setup_done flag on initialization failure
ACPI: processor: Rearrange and clean up acpi_processor_errata_piix4()
ACPI: processor: idle: Replace strlcat() with better alternative
ACPI: processor: idle: Remove redundant static variable and rename cstate check function
ACPI: processor: idle: Move max_cstate update out of the loop
ACPI: processor: idle: Remove redundant cstate check in acpi_processor_power_init
ACPI: processor: idle: Add missing bounds check in flatten_lpi_states()
* acpi-cppc:
ACPI: CPPC: Check cpc_read() return values consistently
ACPI: CPPC: Fix uninitialized ref variable in cppc_get_perf_caps()
ACPI: CPPC: Move reference performance to capabilities
cpufreq: CPPC: Add sysfs documentation for perf_limited
ACPI: CPPC: add APIs and sysfs interface for perf_limited
cpufreq: cppc: Update MIN_PERF/MAX_PERF in target callbacks
cpufreq: CPPC: Update cached perf_ctrls on sysfs write
ACPI: CPPC: Extend cppc_set_epp_perf() for FFH/SystemMemory
ACPI: CPPC: Warn on missing mandatory DESIRED_PERF register
ACPI: CPPC: Add cppc_get_perf() API to read performance controls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Prevent hang at power down for imx8mp-blk-ctrl
- thead: Fix buffer overflow for TH1520 AON driver
- Change Ulf Hansson's email
* tag 'pmdomain-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
MAINTAINERS, mailmap: Change Ulf Hansson's email
pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled
firmware: thead: Fix buffer overflow and use standard endian macros
|
|
The sign_extendXX() lack of Return section and have other style
issues. Address that by updating kernel-doc accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Permit existing memblock reservations to be marked as RSRV_KERN. This
will be used by the EFI code on x86 to distinguish between reservations
of boot services data regions that have actual significance to the
kernel and regions that are reserved temporarily to work around buggy
firmware.
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
jbd2_inode fields are updated under journal->j_list_lock, but some paths
read them without holding the lock (e.g. fast commit helpers and ordered
truncate helpers).
READ_ONCE() alone is not sufficient for the dirty range fields when they
are stored as loff_t because 32-bit platforms can observe torn loads.
Store the dirty range in PAGE_SIZE units as pgoff_t instead.
Represent the dirty range end as an exclusive end page. This avoids a
special sentinel value and keeps MAX_LFS_FILESIZE on 32-bit representable.
Publish a new dirty range by updating end_page before start_page, and
treat start_page >= end_page as empty in the accessor for robustness.
Use READ_ONCE() on the read side and WRITE_ONCE() on the write side for the
dirty range and i_flags to match the existing lockless access pattern.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-5-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Provide a helper to fetch jinode dirty ranges in bytes. This lets
filesystem callbacks avoid depending on the internal representation,
preparing for a later conversion to page units.
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-2-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The lowest level of sched domain for each CPU is assigned an
array where each element tracks the number of tasks preferring
a given LLC, indexed from 0 to max_lid. Since each CPU
has its dedicated sd, this implies that each CPU will have
a dedicated task LLC preference counter.
For example, sd->llc_counts[3] = 2 signifies that there
are 2 tasks on this runqueue which prefer to run within LLC3.
The load balancer can use this information to identify busy
runqueues and migrate tasks to their preferred LLC domains.
This array will be reallocated at runtime during sched domain
rebuild.
Introduce the buffer allocation mechanism, and the statistics
will be calculated in the subsequent patch.
Note: the LLC preference statistics of each CPU are reset on
sched domain rebuild and may under count temporarily, until the
CPU becomes idle and the count is cleared. This is a trade off
to avoid complex data synchronization across sched domain builds.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/42e79eceb8cd6be8a032401d481d101913bc5703.1775065312.git.tim.c.chen@linux.intel.com
|
|
With cache-aware scheduling enabled, each task is assigned a
preferred LLC ID. This allows quick identification of the LLC domain
where the task prefers to run, similar to numa_preferred_nid in
NUMA balancing.
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/f2ceecba5858680349ad4ce9303a2121f0bb7272.1775065312.git.tim.c.chen@linux.intel.com
|
|
decisions
When a system becomes busy and a process's preferred LLC is
saturated with too many threads, tasks within that LLC migrate
frequently. These in LLC migrations introduce latency and degrade
performance. To avoid this, task aggregation should be suppressed
when the preferred LLC is overloaded, which requires a metric to
indicate LLC utilization.
Record per LLC utilization/cpu capacity during periodic load
balancing. These statistics will be used in later patches to decide
whether tasks should be aggregated into their preferred LLC.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/a48151b3d57f2a42a5971aaead1b7f81e69229f4.1775065312.git.tim.c.chen@linux.intel.com
|
|
Adds infrastructure to enable cache-aware load balancing,
which improves cache locality by grouping tasks that share resources
within the same cache domain. This reduces cache misses and improves
overall data access efficiency.
In this initial implementation, threads belonging to the same process
are treated as entities that likely share working sets. The mechanism
tracks per-process CPU occupancy across cache domains and attempts to
migrate threads toward cache-hot domains where their process already
has active threads, thereby enhancing locality.
This provides a basic model for cache affinity. While the current code
targets the last-level cache (LLC), the approach could be extended to
other domain types such as clusters (L2) or node-internal groupings.
At present, the mechanism selects the CPU within an LLC that has the
highest recent runtime. Subsequent patches in this series will use this
information in the load-balancing path to guide task placement toward
preferred LLCs.
In the future, more advanced policies could be integrated through NUMA
balancing-for example, migrating a task to its preferred LLC when spare
capacity exists, or swapping tasks across LLCs to improve cache affinity.
Grouping of tasks could also be generalized from that of a process
to be that of a NUMA group, or be user configurable.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/6269a53221b9439b9ca00d18a9d1946fb64d8cff.1775065312.git.tim.c.chen@linux.intel.com
|
|
kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.
Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.
Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.
This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
'intel/vt-d', 'amd/amd-vi' and 'core' into next
|
|
Introduce the capability bit icm_mng_function_id_mode to indicate that
the device firmware uses vhca_id instead of function_id as the effective
identifier for the firmware commands MANAGE_PAGES, QUERY_PAGES, and page
request event.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The MLX5_PF enum value in mlx5_func_type is used to track firmware
page allocations for the page manager function itself, which is either
the ECPF on SmartNIC systems or the host PF when there is no ECPF.
Rename it to MLX5_SELF to accurately reflect that this counter tracks
pages allocated by the manager for its own use, regardless of whether
it is a PF or ECPF.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v7.1
CoreSight self hosted tracing subsystem updates for Linux v7.1, includes:
- Fix unregistration related issues
- Clean up CTI power management and sysfs code
- Miscellaneous fixes
- MAINTAINERS: Add Leo Yan as Reviewer
- MAINTAINERS: Update Mike's email address
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (25 commits)
coresight: tpdm: fix invalid MMIO access issue
coresight: tpdm: add traceid_show for checking traceid
coresight: platform: check the availability of the endpoint before parse
coresight: cti: fix the check condition in inout_sel_store
MAINTAINERS: coresight: Add Leo Yan as Reviewer
coresight: cti: Properly handle negative offsets in cti_reg32_{show|store}()
coresight: cti: Remove hw_enabled flag
coresight: cti: Remove hw_powered flag
coresight: cti: Rename cti_active() to cti_is_active()
coresight: cti: Remove CPU power management code
coresight: cti: Access ASICCTL only when implemented
coresight: cti: Fix register reads
coresight: cti: Make spinlock usage consistent
drivers/hwtracing/coresight: remove unneeded variable in tmc_crashdata_release()
MAINTAINERS: Change e-mail address for reviewer
coresight: ctcu: fix the spin_bug
coresight: Unify bus unregistration via coresight_unregister()
coresight: Do not mix success path with failure handling
coresight: Move sink validation into etm_perf_add_symlink_sink()
coresight: Refactor sysfs connection group cleanup
...
|
|
There is no reason at all to export these data types to the global
include directory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pretty self-explanatory, nobody needs these.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This has accumulated some fields which are no longer parsed by the core
or set by any driver. Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is not used anywhere in the kernel.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move find_linfo() as bpf_find_linfo() into core.c to allow for its use
in the verifier in subsequent patches.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260408021359.3786905-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extract bpf_get_linfo_file_line as its own function so that the logic to
obtain the file, line, and line number for a given program can be shared
in subsequent patches.
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260408021359.3786905-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In hfsplus_init_header_node() when node_count > 63488
(header bitmap capacity), the code calculates map_nodes,
subtracts them from free_nodes, and marks their positions
used in the bitmap. However, it doesn't write the actual
map node structure (type, record offsets, bitmap) for
those physical positions, only node 0 is written.
This patch reworks hfsplus_create_attributes_file()
logic by introducing a specialized method of
hfsplus_init_map_node() and writing the allocated
map b-tree's nodes by means of
hfsplus_write_attributes_file_node() method.
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260403230556.614171-5-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues.
Reported-by: 김영민 <osori@hspace.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Biju <biju.das.au@gmail.com> says:
This patch series adds binding and driver support for RSPI IP found on the
RZ/G3L SoC. The RSPI is compatible with RZ/V2H RSPI, but has 2 clocks
compared to 3 on RZ/V2H.
Link: https://patch.msgid.link/20260408085418.18770-1-biju.das.jz@bp.renesas.com
|
|
'make htmldocs' complains that dma_fence_unlock_irqrestore() is missing
a description of its @flags parameter. The description is there but it is
missing a ':' sign. Add that and correct the possessive form of "its".
WARNING: ../include/linux/dma-fence.h:414 function parameter 'flags' not described in 'dma_fence_unlock_irqrestore'
Fixes: 3e5067931b5d ("dma-buf: abstract fence locking v2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20260407043649.2015894-1-rdunlap@infradead.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
* kvm-arm64/vgic-v5-ppi: (40 commits)
: .
: Add initial GICv5 support for KVM guests, only adding PPI support
: for the time being. Patches courtesy of Sascha Bischoff.
:
: From the cover letter:
:
: "This is v7 of the patch series to add the virtual GICv5 [1] device
: (vgic_v5). Only PPIs are supported by this initial series, and the
: vgic_v5 implementation is restricted to the CPU interface,
: only. Further patch series are to follow in due course, and will add
: support for SPIs, LPIs, the GICv5 IRS, and the GICv5 ITS."
: .
KVM: arm64: selftests: Add no-vgic-v5 selftest
KVM: arm64: selftests: Introduce a minimal GICv5 PPI selftest
KVM: arm64: gic-v5: Communicate userspace-driveable PPIs via a UAPI
Documentation: KVM: Introduce documentation for VGICv5
KVM: arm64: gic-v5: Probe for GICv5 device
KVM: arm64: gic-v5: Set ICH_VCTLR_EL2.En on boot
KVM: arm64: gic-v5: Introduce kvm_arm_vgic_v5_ops and register them
KVM: arm64: gic-v5: Hide FEAT_GCIE from NV GICv5 guests
KVM: arm64: gic: Hide GICv5 for protected guests
KVM: arm64: gic-v5: Mandate architected PPI for PMU emulation on GICv5
KVM: arm64: gic-v5: Enlighten arch timer for GICv5
irqchip/gic-v5: Introduce minimal irq_set_type() for PPIs
KVM: arm64: gic-v5: Initialise ID and priority bits when resetting vcpu
KVM: arm64: gic-v5: Create and initialise vgic_v5
KVM: arm64: gic-v5: Support GICv5 interrupts with KVM_IRQ_LINE
KVM: arm64: gic-v5: Implement direct injection of PPIs
KVM: arm64: Introduce set_direct_injection irq_op
KVM: arm64: gic-v5: Trap and mask guest ICC_PPI_ENABLERx_EL1 writes
KVM: arm64: gic-v5: Check for pending PPIs
KVM: arm64: gic-v5: Clear TWI if single task running
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/hyp-tracing: (40 commits)
: .
: EL2 tracing support, adding both 'remote' ring-buffer
: infrastructure and the tracing itself, courtesy of
: Vincent Donnefort. From the cover letter:
:
: "The growing set of features supported by the hypervisor in protected
: mode necessitates debugging and profiling tools. Tracefs is the
: ideal candidate for this task:
:
: * It is simple to use and to script.
:
: * It is supported by various tools, from the trace-cmd CLI to the
: Android web-based perfetto.
:
: * The ring-buffer, where are stored trace events consists of linked
: pages, making it an ideal structure for sharing between kernel and
: hypervisor.
:
: This series first introduces a new generic way of creating remote events and
: remote buffers. Then it adds support to the pKVM hypervisor."
: .
tracing: selftests: Extend hotplug testing for trace remotes
tracing: Non-consuming read for trace remotes with an offline CPU
tracing: Adjust cmd_check_undefined to show unexpected undefined symbols
tracing: Restore accidentally removed SPDX tag
KVM: arm64: avoid unused-variable warning
tracing: Generate undef symbols allowlist for simple_ring_buffer
KVM: arm64: tracing: add ftrace dependency
tracing: add more symbols to whitelist
tracing: Update undefined symbols allow list for simple_ring_buffer
KVM: arm64: Fix out-of-tree build for nVHE/pKVM tracing
tracing: selftests: Add hypervisor trace remote tests
KVM: arm64: Add selftest event support to nVHE/pKVM hyp
KVM: arm64: Add hyp_enter/hyp_exit events to nVHE/pKVM hyp
KVM: arm64: Add event support to the nVHE/pKVM hyp and trace remote
KVM: arm64: Add trace reset to the nVHE/pKVM hyp
KVM: arm64: Sync boot clock with the nVHE/pKVM hyp
KVM: arm64: Add trace remote for the nVHE/pKVM hyp
KVM: arm64: Add tracing capability for the nVHE/pKVM hyp
KVM: arm64: Support unaligned fixmap in the pKVM hyp
KVM: arm64: Initialise hyp_nr_cpus for nVHE hyp
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
