| Age | Commit message (Collapse) | Author |
|---|
|
kvmalloc() now supports non-sleeping GFP flags, including
the vmalloc fallback path. This means it may return vmalloc
memory even for GFP_ATOMIC and GFP_NOWAIT allocations.
Freeing such memory with kvfree() may then end up calling
vfree(), which is not safe for non-sleeping contexts.
Introduce kvfree_atomic() helper for such cases. It mirrors
kvfree(), but uses vfree_atomic() for vmalloced memory.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In IGMP, MRC and QQIC fields are not correctly encoded
when generating query packets. Since the receiver of the
query interprets these fields using the IGMPv3 floating-
point decoding logic, any value that exceeds the linear
threshold is incorrectly parsed as an exponential value,
leading to an incorrect interval calculation.
Encode and assign the corresponding protocol fields during
query generation. Introduce the logic to dynamically
calculate the exponent and mantissa using bit-scan (fls).
This ensures MRC and QQIC fields (8-bit) are properly
encoded when transmitting query packets with intervals
that exceed their respective linear threshold value of
128 (for MRT/QQI).
RFC3376: for both MRC and QQIC, values >= 128 represent
the same floating-point encoding as follows:
0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+
|1| exp | mant |
+-+-+-+-+-+-+-+-+
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-4-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Get rid of the IGMPV3_MRC macro and use the igmpv3_mrt() API to
calculate the Max Resp Time from the Maximum Response Code.
Similarly, for IGMPV3_QQIC, use the igmpv3_qqi() API to calculate
the Querier's Query Interval from the QQIC field.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-2-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 041ee6f3727a ("kthread: Rely on HK_TYPE_DOMAIN for preferred
affinity management"), kthreads default to use the HK_TYPE_DOMAIN
cpumask. IOW, it is no longer affected by the setting of the nohz_full
boot kernel parameter.
That means HK_TYPE_KTHREAD should now be an alias of HK_TYPE_DOMAIN
instead of HK_TYPE_KERNEL_NOISE to correctly reflect the current kthread
behavior. Make the change as HK_TYPE_KTHREAD is still being used in
some networking code.
Fixes: 041ee6f3727a ("kthread: Rely on HK_TYPE_DOMAIN for preferred affinity management")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Some endpoint platforms cannot use platform MSI / GIC ITS to implement
EP-side doorbells. In those cases, EPF drivers cannot provide an
interrupt-driven doorbell and often fall back to polling.
Add an "embedded" doorbell backend that uses a controller-integrated
doorbell target (e.g. DesignWare integrated eDMA interrupt-emulation
doorbell).
The backend locates the doorbell register and a corresponding Linux IRQ
via the EPC aux-resource API. If the doorbell register is already
exposed via a fixed BAR mapping, provide BAR+offset. Otherwise provide
the DMA address returned by dma_map_resource() (which may be an IOVA
when an IOMMU is enabled) so EPF drivers can map it into BAR space.
When MSI doorbell allocation fails with -ENODEV,
pci_epf_alloc_doorbell() falls back to this embedded backend.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260414141514.1341429-8-den@valinux.co.jp
|
|
Fix a spelling error in the comment for the ns_type member of struct class.
Change "detemine" to "determine".
Signed-off-by: Prabhudasu Vatala <prabhudasuvatala@gmail.com>
Link: https://patch.msgid.link/20260503141826.27462-1-prabhudasuvatala@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
scx_task_iter's cgroup-scoped mode can return tasks whose
sched_ext_dead() has already completed: cgroup_task_dead() removes
from cset->tasks after sched_ext_dead() in finish_task_switch() and is
irq-work deferred on PREEMPT_RT. The global mode is fine -
sched_ext_dead() removes from scx_tasks via list_del_init() first.
Callers (sub-sched enable prep/abort/apply, scx_sub_disable(),
scx_fail_parent()) assume returned tasks are still on @sch and trip
WARN_ON_ONCE() or operate on torn-down state otherwise.
Set %SCX_TASK_OFF_TASKS in sched_ext_dead() under @p's rq lock and
have scx_task_iter_next_locked() skip flagged tasks under the same
lock. Setter and reader serialize on the per-task rq lock - no race.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
a72f73c4dd9b ("cgroup: Don't expose dead tasks in cgroup") made
css_task_iter_advance() skip exiting tasks so cgroup.procs stays consistent
with waitpid() visibility. Unfortunately, this broke scx_task_iter.
scx_task_iter walks either scx_tasks (global) or a cgroup subtree via
css_task_iter() and the two modes are expected to cover the same set of
tasks. After the above change the cgroup-scoped mode silently skips tasks
past exit_signals() that are still on scx_tasks.
scx_sub_enable_workfn()'s abort path is one of the symptoms: an exiting
SCX_TASK_SUB_INIT task can race past the cgroup iter leaking
__scx_init_task() state. Other iterations share the same gap.
Add CSS_TASK_ITER_WITH_DEAD to opt out of the skip and use it from
scx_task_iter().
Fixes: b0e4c2f8a0f0 ("sched_ext: Implement cgroup subtree iteration for scx_task_iter")
Reported-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
A chain of commits going back to v7.0 reworked rmdir to satisfy the
controller invariant that a subsystem's ->css_offline() must not run while
tasks are still doing kernel-side work in the cgroup.
[1] d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out")
[2] a72f73c4dd9b ("cgroup: Don't expose dead tasks in cgroup")
[3] 1b164b876c36 ("cgroup: Wait for dying tasks to leave on rmdir")
[4] 4c56a8ac6869 ("cgroup: Fix cgroup_drain_dying() testing the wrong condition")
[5] 13e786b64bd3 ("cgroup: Increment nr_dying_subsys_* from rmdir context")
[1] moved task cset unlink from do_exit() to finish_task_switch() so a
task's cset link drops only after the task has fully stopped scheduling.
That made tasks past exit_signals() linger on cset->tasks until their final
context switch, which led to a series of problems as what userspace expected
to see after rmdir diverged from what the kernel needs to wait for. [2]-[5]
tried to bridge that divergence: [2] filtered the exiting tasks from
cgroup.procs; [3] had rmdir(2) sleep in TASK_UNINTERRUPTIBLE for them; [4]
fixed the wait's condition; [5] made nr_dying_subsys_* visible
synchronously.
The cgroup_drain_dying() wait in [3] turned out to be a dead end. When the
rmdir caller is also the reaper of a zombie that pins a pidns teardown (e.g.
host PID 1 systemd reaping orphan pids that were re-parented to it during
the same teardown), rmdir blocks in TASK_UNINTERRUPTIBLE waiting for those
pids to free, the pids can't free because PID 1 is the reaper and it's stuck
in rmdir, and the system A-A deadlocks. No internal lock ordering breaks
this; the wait itself is the bug.
The css killing side that drove the original reorder, however, can be made
cleanly asynchronous: ->css_offline() is already async, run from
css_killed_work_fn() driven by percpu_ref_kill_and_confirm(). The fix is to
make that chain start only after all tasks have left the cgroup. rmdir's
user-visible side then returns as soon as cgroup.procs and friends are
empty, while ->css_offline() still runs only after the cgroup is fully
drained.
Verified by the original reproducer (pidns teardown + zombie reaper, runs
under vng) which hangs vanilla and succeeds here, and by per-commit
deterministic repros for [2], [3], [4], [5] with a boot parameter that
widens the post-exit_signals() window so each state is reliably reachable.
Some stress tests on top of that.
cgroup_apply_control_disable() has the same shape of pre-existing race:
when a controller is disabled via subtree_control, kill_css() ran
synchronously while tasks past exit_signals() could still be linked to
the cgroup's csets, and ->css_offline() could fire before they drained.
This patch preserves the existing synchronous behavior at that call site
(kill_css_sync() + kill_css_finish() back-to-back) and a follow-up patch
will defer kill_css_finish() there using a per-css trigger.
This seems like the right approach and I don't see problems with it. The
changes are somewhat invasive but not excessively so, so backporting to
-stable should be okay. If something does turn out to be wrong, the fallback
is to revert the entire chain ([1]-[5]) and rework in the development branch
instead.
v2: Pin cgrp across the deferred destroy work with explicit
cgroup_get()/cgroup_put() around queue_work() and the work_fn. v1
wasn't actually broken (ordered cgroup_offline_wq + queue_work order
in cgroup_task_dead() saved it) but the explicit ref removes the
dependency on those non-obvious invariants. Also note the
pre-existing cgroup_apply_control_disable() race in the description;
a follow-up will defer kill_css_finish() there.
Fixes: 1b164b876c36 ("cgroup: Wait for dying tasks to leave on rmdir")
Cc: stable@vger.kernel.org # v7.0+
Reported-and-tested-by: Martin Pitt <martin@piware.de>
Link: https://lore.kernel.org/all/afHNg2VX2jy9bW7y@piware.de/
Link: https://lore.kernel.org/all/35e0670adb4abeab13da2c321582af9f@kernel.org/
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Amdgpu was the only user of the signal on any feature and we dropped
that use case recently, so we can remove that functionality.
v2: update num_pending only after the fence is signaled
v3: separate out simplifying dma_fence_array implementation
v4: fix XE patch split fallout
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20260422103012.1647-1-christian.koenig@amd.com
|
|
In case a chip supports continuous reads, but uses a slightly different
cache operation for these, it may provide a secondary operation template
which will be used only during continuous cache read operations.
From a vendor driver point of view, enabling this feature implies
providing a new set of templates for these continuous read
operations. The core will automatically pick the fastest variant,
depending on the hardware capabilities.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Aside from preparation changes in the SPI NAND core, the changes carried
here focus on the shared spi-mem layer which is enhanced in order to
bring two new features:
- The possibility to fill a primary and a secondary operation template
in the direct mapping structure in order to support continuous reads
in SPI NAND, which may require two different read operations.
- SPI controllers may indicate possible CS instabilities over long
transfers by setting a boolean. This capability is related to the
previous one, the need for it has arised while testing SPI NAND
continuous reads with the Cadence QSPI controller which cannot, under
certain conditions, keep the CS asserted for the length of
an eraseblock-large transfer.
|
|
Some controllers are 'smart', and that's a problem.
For instance, the Cadence quadspi controller is capable of deasserting
the CS automatically whenever a too long period of time without any data
to transfer elapses.
This 'feature' combined with a loaded interconnect with arbitration, a
"long" transfer may be split into smaller DMA transfers. In this case
the controller may allow itself to deassert the CS between chunks.
Deasserting the CS stops any ongoing continuous read. Reasserting it
later to continue the reading will only result in the host getting
garbage.
In this case, the host controller driver has no control over the CS
state, so we cannot reliably enable continuous reads. Flag this
limitation through a spi-mem controller capability.
The inversion in the flag name (starting with 'no_') is voluntary, in
order to avoid the need to set this flag in all controller drivers. Only
the broken controllers shall set this bit, the default being that the
controller masters its CS fully.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
In some situations, direct mappings may need to use different
operation templates.
For instance, when enabling continuous reads, Winbond SPI NANDs no
longer expect address cycles because they would be ignoring them
otherwise. Hence, right after the command opcode, they start counting
dummy cycles, followed by the data cycles as usual.
This breaks the assumptions of "reads from cache" always being done
identically once the best variant has been picked up, across the
lifetime of the system.
In order to support this feature, we must give direct mapping more than
a single operation template to use, in order to switch to using
secondary operations upon request by the upper layer.
Create the concept of optional secondary operation template, which may
or may not be fulfilled by the SPI NAND and SPI NOR cores. If the
underlying SPI controller does not leverage any kind of direct mapping
acceleration, the feature has no impact and can be freely
used. Otherwise, the controller driver needs to opt-in for using this
feature, if supported.
The condition checked to know whether a secondary operation has been
provided or not is to look for a non zero opcode to limit the creation
of extra variables. In practice, the opcode 0x00 exist, but is not
related to any cache related operation.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
As of now, we only use a single operation template when creating SPI
memory direct mappings. With the idea to extend this possibility to 2,
rename the template to reflect that we are currently setting the
"primary" operation, and create a pointer in the same structure to point
to it.
From a user point of view, the op_tmpl name remains but becomes a
pointer, leading to minor changes in both the SPI NAND and SPI NOR
cores.
There is no functional change.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Direct mappings are very static concepts, which allow us to reuse a
template to perform reads or writes in a very efficient manner after a
single initialization. With the introduction of pipelined ECC engines
for SPI controllers, the need to differentiate between an operation with
and without correction has arised. The chosen solution at that time has
been to create new direct mappings for these operations, jumping from 2
to 4 dirmaps per target. Enabling ECC was done by choosing the correct
dirmap.
Today, we need to further parametrize dirmaps. With the goal to enable
continuous reads on a wider range of devices, we will need more
flexibility regarding the read from cache operation template to pick at
run time, for instance to use shorter "continuous read from cache"
variants.
We could create other direct mappings, but it would increase the matrix
by a power of two, bringing the theoretical number of dirmaps to
8 (read/write, ecc, shorter read variants) per target. This grow is not
sustainable, so let's change how dirmaps work - a little bit.
Operations already carry an ECC parameter, use it to indicate whether
error correction is required or not. In practice this change happens
only at the core level, SPI controller drivers do not care about the
direct mapping structure in this case, they just pick whatever is in the
template as a base. As a result, we allow the core to dynamically change
the content of the templates.
He who can do more can do less, so during the checking steps, make sure
to enable the ECC requirement just for the time of the checks.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
This helper is going to be needed in a vendor driver, so expose it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add support for the PLLDSI{0,1} clocks in the r9a09g047 CPG driver.
Introduce CLK_PLLDSI{0,1} also, introduce the
rzg3e_cpg_pll_dsi{0,1}_limits structures to describe the frequency
constraints specific to the RZ/G3E SoC.
On Renesas RZ/G3E:
- PLLDSI0 maximum output frequency: 1218 MHz
- PLLDSI1 maximum output frequency: 609 MHz
These limits are enforced through the newly added
RZG3E_CPG_PLL_DSI{0,1}_LIMITS().
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/d26ec5349b0eb7ddb7d244fc53d1111a8530328f.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Split the old contents from gpio.h for clarity. Ideally any driver
that still includes linux/gpio.h can now be ported over to use
either linux/gpio/legacy.h or linux/gpio/consumer.h, with the
original file getting removed once that is complete.
No functional changes intended for now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260428154522.2861492-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add detecting and parsing EEE device capability.
Recently EEE functionality support has been introduced to E610 FW.
Currently ixgbe driver has no possibility to detect whether NVM
loaded on given adapter supports EEE.
There's dedicated device capability element reflecting FW support
for given EEE link speed.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-1-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add mlx5_dma_pool alloc/free paths, and wire mlx5_frag_buf allocation
and free paths to use them.
mlx5_frag_buf_alloc_node() now selects an mlx5_dma_pool to allocate
fragments from, instead of directly allocating full coherent pages.
mlx5_frag_buf_free() frees from the respective pool.
mlx5_dma_pool_alloc() keeps allocation fast by maintaining pages with
available indexes at the head of the list, so the common allocation path
can take a free index immediately. New backing pages are allocated only
when no free index is available.
mlx5_dma_pool_free() returns released indexes to the pool and frees a
backing page once all of its indexes become free. This avoids keeping
fully free pages for the lifetime of the pool and reduces coherent DMA
memory footprint.
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260429201429.223809-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce mlx5 DMA pool and pool-page data structures, and add the
creation and teardown paths.
Each NUMA node owns a set of mlx5_dma_pool instances, each one with a
different block size. The sizes are defined as all powers of two
starting from MLX5_ADAPTER_PAGE_SHIFT and up to PAGE_SHIFT. Since
mlx5_frag_bufs are used to back objects whose sizes are encoded relative
to MLX5_ADAPTER_PAGE_SHIFT, a smaller block_shift value cannot be used.
Requests larger than PAGE_SIZE continue to be handled as page-sized
fragments, as in the existing frag-buf allocation model.
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260429201429.223809-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rate_interval_us to tcp_sock_write_tx group
These fields are used in TX path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430100021.211139-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tp->bytes_acked is touched in TX path only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430100021.211139-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These fields are touched in when payload is sent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430100021.211139-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
segs_in is changed for each incoming packet, including ACK packets.
segs_out is changed for each outgoing packet, including ACK packets.
They belong to tcp_sock_write_txrx group.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430100021.211139-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These counters are changed whenever sent data is acknowleged.
They do not belong to tcp_sock_write_txrx group, because TCP receivers
do not touch them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430100021.211139-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Fixes for rc2, the usual amdgpu/xe double header, I think xe had a
couple of weeks combined due to some maintainer access issues,
otherwise there's just a few misc fixes and documentation fixups.
core and helpers:
- calculate framebuffer geometry with format helpers
- fix docs
amdgpu:
- GFX12 fix for CONFIG_DRM_DEBUG_MM configs
- Fix DC analog support
- Userq fixes
- GART placement fix
- Aldebaran SMU fixes
- AMDGPU_INFO_READ_MMR_REG fix
- UVD 3.1 fix
- GC 6 TCC fix
- Fix root reservation in amdgpu_vm_handle_fault()
- RAS fix
- Module reload fix for APUs
- Fix build for CONFIG_DRM_FBDEV_EMULATION=n
- IGT DWB regression fix
- GC 11.5.4 fix
- VCN user fence fixes
- JPEG user fence fixes
- SMU 13.0.6 fix
- VCN 3/4 IB parser fixes
- NV3x+ dGPU vblank fix
- DCE6/8 fixes for LVDS/eDP panels without an EDID
amdkfd:
- Fix for when CONFIG_HSA_AMD is not set
- SVM fixes
xe:
- uapi: Add missing pad and extensions check
- uapi: Reject unsafe PAT indices for CPU cached memory
- Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge
- Xe3p tuning and workaround fixes
- USE drm mm instead of drm SA for CCS read/write
- Fix leaks and null derefs
- Fix Wa_18022495364
appletbdrm:
- allocate protocol buffers with kvzalloc()
dma-buf:
- fix docs
imagination:
- avoid segfault in debugfs
ofdrm:
- put PCI device reference on errors
udl:
- increase USB timeout"
* tag 'drm-fixes-2026-05-02' of https://gitlab.freedesktop.org/drm/kernel: (77 commits)
drm/xe/uapi: Reject coh_none PAT index for CPU_ADDR_MIRROR
drm/xe/uapi: Reject coh_none PAT index for CPU cached memory in madvise
drm/xe/xelp: Fix Wa_18022495364
drm/xe/gsc: Fix BO leak on error in query_compatibility_version()
drm/xe/eustall: Fix drm_dev_put called before stream disable in close
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
drm/xe/bo: Fix bo leak on GGTT flag validation in xe_bo_init_locked()
drm/xe/bo: Fix bo leak on unaligned size validation in xe_bo_init_locked()
drm/xe: Fix potential NULL deref in xe_exec_queue_tlb_inval_last_fence_put_unlocked
drm/xe/vf: Use drm mm instead of drm sa for CCS read/write
drm/xe: Add memory pool with shadow support
drm/xe/debugfs: Correct printing of register whitelist ranges
drm/xe: Mark ROW_CHICKEN5 as a masked register
drm/xe/tuning: Use proper register offset for GAMSTLB_CTRL
drm/xe/xe3p_lpg: Add missing indirect ring state feature flag
drm/xe: Drop redundant rtp entries for Wa_14019988906 & Wa_14019877138
drm/xe/vm: Add missing pad and extensions check
drm/xe: Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge()
...
|
|
drivers/net/Space.c is the last remnant of the linux-2.4.x driver model
that required each subsystem and device driver init function to be called
from init/main.c explicitly, before the introduction of initcall levels.
In linux-7.0, this was only used for a handful of ISA network drivers,
with the ne2000 driver being the last one.
Fold the code into ne.c directly, with minimal changes to preserve
the existing command line parsing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429145624.2948432-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Replace skb_try_make_writable() by skb_ensure_writable() in
nft_fwd_netdev and the flowtable to deal with uncloned packets
having their network header in paged fragments.
2) Drop packet if output device does not exist and ensure sufficient
headroom in nft_fwd_netdev before transmitting the skb.
3) Use the existing dup recursion counter in nft_fwd_netdev for the
neigh_xmit variant, from Weiming Shi.
4) Add .check_hooks interface to x_tables to detach the control plane
hook check based on the match/target configuration. Then, update
nft_compat to use .check_hooks from .validate path, this fixes a
lack of hook validation for several match/targets.
5) Fix incorrect .usersize in xt_CT, from Florian Westphal.
6) Fix a memleak with netdev tables in dormant state,
from Florian Westphal.
7) Several patches to check if the packet is a fragment, then skip
layer 4 inspection, for x_tables and nf_tables; as well as common
nf_socket infrastructure. The xt_hashlimit match drops fragments
to stay consistent with the existing approach when failing to parse
the layer 4 protocol header.
8) Ensure sufficient headroom in the flowtable before transmitting
the skb.
9) Fix the flowtable inline vlan approach for double-tagged vlan:
Reverse the iteration over .encap[] since it represents the
encapsulation as seen from the ingress path. Postpone pushing
layer 2 header so output device is available to calculate needed
headroom. Finally, add and use nf_flow_vlan_push() to fix it.
10) Fix flowtable inline pppoe with GSO packets. Moreover, use
FLOW_OFFLOAD_XMIT_DIRECT to fill up destination hardware
address since neighbour cache does not exist in pppoe.
11) Use skb_pull_rcsum() to decapsulate vlan and pppoe headers, for
double-tagged vlan in particular this should provide some benefits
in certain scenarios.
More notes regarding 9-11):
- sashiko is also signalling to use it for IPIP headers, but that needs
more adjustments such setting skb->protocol after removing the IPIP
header, will follow up in a separated patch.
- I plan to submit selftests to cover double-tagged-vlan. As for pppoe,
it should be possible but that would mandate a few userspace dependencies.
This has been semi-automatically tested by me and reporters describing
broken double-vlan-tagged and pppoe currently in the flowtable.
* tag 'nf-26-05-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: use skb_pull_rcsum() to pop vlan/pppoe header
netfilter: flowtable: fix inline pppoe encapsulation in xmit path
netfilter: flowtable: fix inline vlan encapsulation in xmit path
netfilter: flowtable: ensure sufficient headroom in xmit path
netfilter: xtables: fix L4 header parsing for non-first fragments
netfilter: nf_tables: skip L4 header parsing for non-first fragments
netfilter: nf_socket: skip socket lookup for non-first fragments
netfilter: nf_tables: fix netdev hook allocation memleak with dormant tables
netfilter: xt_CT: fix usersize for v1 and v2 revision
netfilter: nft_compat: run xt_check_hooks_{match,target}() from .validate
netfilter: x_tables: add .check_hooks to matches and targets
netfilter: nft_fwd_netdev: use recursion counter in neigh egress path
netfilter: nft_fwd_netdev: add device and headroom validate with neigh forwarding
netfilter: replace skb_try_make_writable() by skb_ensure_writable()
====================
Link: https://patch.msgid.link/20260501122237.296262-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This makes it easier to rebuild cifs.ko and ksmbd.ko against
a running kernel.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/linux-cifs/aehrPuY60VMcYGU8@infradead.org/
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
All alarmtimer users are converted to alarm_start_timer(). Remove the now
unused interfaces.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/20260408114952.670899355@kernel.org
|
|
Alarm timers utilize hrtimers for normal operation and only switch to the
RTC on suspend. In order to catch already expired timers early and without
going through a timer interrupt cycle, provide a new start function which
internally uses hrtimer_start_range_ns_user().
If hrtimer_start_range_ns_user() detects an already expired timer, it does
not queue it. In that case remove the timer from the alarm base as well.
Return the status queued or not back to the caller to handle the early
expiry.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260408114952.332822525@kernel.org
|
|
Calvin reported an odd NMI watchdog lockup which claims that the CPU locked
up in user space. He provided a reproducer, which set's up a timerfd based
timer and then rearms it in a loop with an absolute expiry time of 1ns.
As the expiry time is in the past, the timer ends up as the first expiring
timer in the per CPU hrtimer base and the clockevent device is programmed
with the minimum delta value. If the machine is fast enough, this ends up
in a endless loop of programming the delta value to the minimum value
defined by the clock event device, before the timer interrupt can fire,
which starves the interrupt and consequently triggers the lockup detector
because the hrtimer callback of the lockup mechanism is never invoked.
The clockevents code already has a last resort mechanism to prevent that,
but it's sensible to catch such issues before trying to reprogram the clock
event device.
Provide a variant of hrtimer_start_range_ns(), which sanity checks the
timer after queueing it. It does not so before because the timer might be
armed and therefore needs to be dequeued. also we optimize for the latest
possible point to check, so that the clock event prevention is avoided as
much as possible.
If the timer is already expired _before_ the clock event is reprogrammed,
remove the timer from the queue and signal to the caller that the operation
failed by returning false.
That allows the caller to take immediate action without going through the
loops and hoops of the hrtimer interrupt.
The queueing code can't invoke the timer callback as the caller might hold
a lock which is taken in the callback.
Add a tracepoint which allows to analyze the expired at start situation.
Reported-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260408114951.995031895@kernel.org
|
|
rseq_reset() uses memset() to clear the tasks rseq data. That's racy
against membarrier() and preemption.
Guard it with irqsave to cure this.
Fixes: faba9d250eae ("rseq: Introduce struct rseq_data")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/20260428224427.353887714%40kernel.org
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- MD pull request via Yu:
- Fix a raid5 UAF on IO across the reshape position
- Avoid failing RAID1/RAID10 devices for invalid IO errors
- Fix RAID10 divide-by-zero when far_copies is zero
- Restore bitmap grow through sysfs
- Use mddev_is_dm() instead of open-coding gendisk checks
- Use ATTRIBUTE_GROUPS() for md default sysfs attributes
- Replace open-coded wait loops with wait_event helpers
- NVMe pull request via Keith:
- Target data transfer size configuation (Aurelien)
- Enable P2P for RDMA (Shivaji Kant)
- TCP target updates (Maurizio, Alistair, Chaitanya, Shivam Kumar)
- TCP host updates (Alistair, Chaitanya)
- Authentication updates (Alistair, Daniel, Chris Leech)
- Multipath fixes (John Garry)
- New quirks (Alan Cui, Tao Jiang)
- Apple driver fix (Fedor Pchelkin)
- PCI admin doorbell update fix (Keith)
- Properly propagate CDROM read-only state to the block layer
* tag 'block-7.1-20260430' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (35 commits)
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes
md: use mddev_is_dm() instead of open-coding gendisk checks
md/raid1: replace wait loop with wait_event_idle() in raid1_write_request()
md/md-bitmap: add a none backend for bitmap grow
md/md-bitmap: split bitmap sysfs groups
md: factor bitmap creation away from sysfs handling
md: use mddev_lock_nointr() in mddev_suspend_and_lock_nointr()
md: replace wait loop with wait_event() in md_handle_request()
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
md/raid1,raid10: don't fail devices for invalid IO errors
MAINTAINERS: Add Xiao Ni as md/raid reviewer
md/raid5: Fix UAF on IO across the reshape position
cdrom, scsi: sr: propagate read-only status to block layer via set_disk_ro()
nvme-auth: Hash DH shared secret to create session key
nvme-pci: fix missed admin queue sq doorbell write
nvme-auth: Include SC_C in RVAL controller hash
nvme-tcp: teardown circular locking fixes
nvmet-tcp: Don't clear tls_key when freeing sq
Revert "nvmet-tcp: Don't free SQ on authentication success"
nvme: skip trace completion for host path errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"20 hotfixes. All are for MM (and for MMish maintainers). 9 are
cc:stable and the remainder are for post-7.0 issues or aren't deemed
suitable for backporting.
There are two DAMON series from SeongJae Park which address races
which could lead to use-after-free errors, and avoid the possibility
of presenting stale parameter values to users"
* tag 'mm-hotfixes-stable-2026-04-30-15-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memcontrol: fix rcu unbalance in get_non_dying_memcg_end()
mm/userfaultfd: detect VMA type change after copy retry in mfill_copy_folio_retry()
MAINTAINERS: remove stale kdump project URL
mm/damon/stat: detect and use fresh enabled value
mm/damon/lru_sort: detect and use fresh enabled and kdamond_pid values
mm/damon/reclaim: detect and use fresh enabled and kdamond_pid values
selftests/mm: specify requirement for PROC_MEM_ALWAYS_FORCE=y
mm/damon/sysfs-schemes: protect path kfree() with damon_sysfs_lock
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
MAINTAINERS: update Li Wang's email address
MAINTAINERS, mailmap: update email address for Qi Zheng
MAINTAINERS: update Liam's email address
mm/hugetlb_cma: round up per_node before logging it
MAINTAINERS: fix regex pattern in CORE MM category
mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap()
mm: start background writeback based on per-wb threshold for strictlimit BDIs
kho: fix error handling in kho_add_subtree()
liveupdate: fix return value on session allocation failure
mailmap: update entry for Dan Carpenter
vmalloc: fix buffer overflow in vrealloc_node_align()
|
|
Update the security_inode_listsecurity() interface to allow
use of the xattr_list_one() helper and update the hook
implementations.
Link: https://lore.kernel.org/selinux/20250424152822.2719-1-stephen.smalley.work@gmail.com
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: forward porting to bring this patch up to v7.1-rc1+]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Change INTEL_SIP_SMC_FCS_GET_PROVISION_DATA's SMC call to async from sync
to avoid long runtime which may cause the watchdog timeout issue.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2026-04-29
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Extend query_esw_functions output for multi-function support
net/mlx5: Remove unused host_sf_enable field
net/mlx5: Add function_id_type for enable/disable_hca cmds
mlx5: Rename the vport number enums for host PF and VF
====================
Link: https://patch.msgid.link/20260429212747.224411-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Besides an out-of-bound bug, this is about properly supporting Winbond
octal SPI NAND chips which use a specific pattern for stuffing more
address bits in some operations. This uses the spi-mem flag in SPI
NAND that was added to the spi-mem layer just before the merge window
through the spi tree"
* tag 'mtd/fixes-for-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: winbond: Fix ODTR write VCR on W35NxxJW
mtd: spinand: winbond: Set the packed page read flag to W35N02/04JW
mtd: spinand: Add support for packed read data ODTR commands
mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some new content already, notably:
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
* tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (39 commits)
wifi: brcmsmac: phy_lcn: Remove dead code in wlc_lcnphy_radio_2064_channel_tune_4313()
wifi: mac80211: always allow transmitting null-data on TXQs
wifi: mac80211: use kstrtobool_from_user() in debugfs callbacks
wifi: cfg80211: validate cipher suite for NAN Data keys
wifi: nl80211: check link is beaconing for color change
wifi: mac80211: clarify an 802.11 VHT spec reference
wifi: mac80211: fix per-station PHY capability bandwidth
wifi: mac80211: clarify per-STA bandwidth handling
wifi: nl80211: always validate AP operation/PHY regulatory
wifi: cfg80211: provide HT/VHT operation for AP beacon
wifi: nl80211: reject too short HT/VHT/HE/EHT capability/operation
wifi: cfg80211: move AP HT/VHT/... operation to beacon info
wifi: nl80211: reject beacons with bad HE operation
wifi: cfg80211: remove HE/SAE H2E required fields
wifi: mac80211: remove ieee80211_sta_cur_vht_bw()
wifi: mac80211: clean up ieee80211_sta_cap_rx_bw()
wifi: mac80211: clean up initial STA NSS/bandwidth handling
wifi: mac80211: clean up STA NSS handling
wifi: mac80211: simplify ieee80211_sta_rx_bw_to_chan_width()
wifi: nl80211: document channel opmode change channel width
...
====================
Link: https://patch.msgid.link/20260430120304.249081-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The remote state is set to RPROC_DETACHED if the resource table is found
in the memory. However, this can be wrong if the remote is not started,
but firmware is still loaded in the memory. Use PM_GET_NODE_STATUS call
to the firmware to request the state of the RPU node. If the RPU is
actually out of reset and running, only then move the remote state to
RPROC_DETACHED, otherwise keep the remote state to RPROC_OFFLINE.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Fixes: bca4b02ef92e ("remoteproc: xlnx: Add attach detach support")
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20260428221855.313752-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc2).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare pci-ep-msi for non-MSI doorbell backends.
Factor MSI doorbell allocation into a helper and extend struct
pci_epf_doorbell_msg with:
- irq_flags: required IRQ request flags (e.g. IRQF_SHARED for some
backends)
- type: doorbell backend type
- bar/offset: pre-exposed doorbell target location, if any
Initialize these fields for the existing MSI-backed doorbell
implementation.
Also add PCI_EPF_DOORBELL_EMBEDDED type, which is to be implemented in a
follow-up patch.
No functional changes.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-5-den@valinux.co.jp
|
|
Endpoint controller drivers may integrate auxiliary blocks (e.g. DMA
engines) whose register windows and descriptor memories metadata need to
be exposed to a remote peer. Endpoint function drivers need a generic
way to discover such resources without hard-coding controller-specific
helpers.
Add pci_epc_get_aux_resources_count() / pci_epc_get_aux_resources() and
the corresponding pci_epc_ops callbacks. The count helper returns the
number of available resources, while the get helper fills a
caller-provided array of resources described by type, physical address
and size, plus type-specific metadata.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Suggested-by: Frank Li <Frank.li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260414141514.1341429-2-den@valinux.co.jp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- ipmr: free mr_table after RCU grace period.
Previous releases - regressions:
- core: add net_iov_init() and use it to initialize ->page_type
- sched: taprio: fix NULL pointer dereference in class dump
- netfilter: nf_tables:
- use list_del_rcu for netlink hooks
- fix strict mode inbound policy matching
- tcp: make probe0 timer handle expired user timeout
- vrf: fix a potential NPD when removing a port from a VRF
- eth: ice:
- fix NULL pointer dereference in ice_reset_all_vfs()
- fix infinite recursion in ice_cfg_tx_topo via ice_init_dev_hw
Previous releases - always broken:
- page_pool: fix memory-provider leak in error path
- sched: sch_cake: annotate data-races in cake_dump_stats()
- mptcp: fix scheduling with atomic in timestamp sockopt
- psp: check for device unregister when creating assoc
- tls: fix strparser anchor skb leak on offload RX setup failure
- eth:
- stmmac: prevent NULL deref when RX memory exhausted
- airoha: do not read uninitialized fragment address
- rtl8150: fix use-after-free in rtl8150_start_xmit()
Misc:
- add Ido Schimmel as IPv4/IPv6 maintainer
- add David Heidelberg as NFC subsystem maintainer"
* tag 'net-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
net/sched: cls_flower: revert unintended changes
sfc: fix error code in efx_devlink_info_running_versions()
net: tls: fix strparser anchor skb leak on offload RX setup failure
ice: add dpll peer notification for paired SMA and U.FL pins
ice: fix missing dpll notifications for SW pins
dpll: export __dpll_pin_change_ntf() for use under dpll_lock
ice: fix SMA and U.FL pin state changes affecting paired pin
ice: fix missing SMA pin initialization in DPLL subsystem
ice: fix infinite recursion in ice_cfg_tx_topo via ice_init_dev_hw
ice: fix NULL pointer dereference in ice_reset_all_vfs()
iavf: add VIRTCHNL_OP_ADD_VLAN to success completion handler
iavf: wait for PF confirmation before removing VLAN filters
iavf: stop removing VLAN filters from PF on interface down
iavf: rename IAVF_VLAN_IS_NEW to IAVF_VLAN_ADDING
page_pool: fix memory-provider leak in page_pool_create_percpu() error path
bonding: 3ad: implement proper RCU rules for port->aggregator
net: airoha: Do not return err in ndo_stop() callback
hv_sock: fix ARM64 support
MAINTAINERS: update the IPv4/IPv6 entry and add Ido Schimmel
selftests: drv-net: clarify linters and frameworks in README
...
|
|
Add pin-operstate enum and operstate_on_dpll_get callback to report
the actual hardware status of a pin with respect to its parent DPLL
device. Unlike pin-state (which reflects administrative intent set
by the user), operstate reflects what the hardware is actually doing.
Defined operational states:
- active: pin is qualified and actively used by the DPLL
- standby: pin is qualified but not actively used by the DPLL
- no-signal: pin does not have a valid signal
- qual-failed: pin signal failed qualification
The operstate is reported inside the pin-parent-device nested
attribute alongside the existing state and phase-offset attributes.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Petr Oros <poros@redhat.com>
Link: https://patch.msgid.link/20260428154907.2820654-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some subsystems enable -Wmaybe-uninitialized [1], which can trigger
false positives when KCSAN is enabled. Specifically, passing an
uninitialized variable to functions that instrument accesses (e.g.,
copy_from_user()) results in calls to __kcsan_check_access().
Because __kcsan_check_access() takes a `const volatile void *ptr`, GCC
infers that the function may only read the memory location, and thus
warns if the passed variable is uninitialized.
However, KCSAN is a dynamic analysis tool for data race detection; while
it does read the memory location to detect concurrent modifications, the
"initialized'ness" of the memory location is irrelevant for its analysis.
Use absolute_pointer() in __kcsan_check_write(), kcsan_check_write(),
and kcsan_check_atomic_write() to hide the pointer from the compiler,
preventing it from concluding that the pointer passed points to
uninitialized memory.
This fixes warnings like:
| CC fs/ntfs3/file.o
| In file included from include/asm-generic/rwonce.h:27,
| from arch/arm64/include/asm/rwonce.h:81,
| from include/linux/compiler.h:369,
| from include/linux/array_size.h:5,
| from include/linux/kernel.h:16,
| from include/linux/backing-dev.h:12,
| from fs/ntfs3/file.c:10:
| In function 'instrument_copy_from_user_before',
| inlined from '_inline_copy_from_user' at include/linux/uaccess.h:184:2,
| inlined from 'copy_from_user' at include/linux/uaccess.h:221:9,
| inlined from 'ntfs_ioctl_fitrim' at fs/ntfs3/file.c:77:6,
| inlined from 'ntfs_ioctl' at fs/ntfs3/file.c:164:10:
| include/linux/kcsan-checks.h:220:28: error: 'range' may be used uninitialized [-Werror=maybe-uninitialized]
| 220 | #define kcsan_check_access __kcsan_check_access
| | ^
| include/linux/kcsan-checks.h:311:9: note: in expansion of macro 'kcsan_check_access'
| 311 | kcsan_check_access(ptr, size, KCSAN_ACCESS_WRITE)
| | ^~~~~~~~~~~~~~~~~~
| include/linux/instrumented.h:147:9: note: in expansion of macro 'kcsan_check_write'
| 147 | kcsan_check_write(to, n);
| | ^~~~~~~~~~~~~~~~~
| include/linux/kcsan-checks.h: In function 'ntfs_ioctl':
| include/linux/kcsan-checks.h:37:6: note: by argument 1 of type 'const volatile void *' to '__kcsan_check_access' declared here
| 37 | void __kcsan_check_access(const volatile void *ptr, size_t size, int type);
| | ^~~~~~~~~~~~~~~~~~~~
| fs/ntfs3/file.c:65:29: note: 'range' declared here
| 65 | struct fstrim_range range;
| | ^~~~~
Link: https://lore.kernel.org/all/5da10cca-875b-418d-b54e-6be3ea32c266@app.fastmail.com/ [1]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
|
|
When using global functions (i.e. subprogs), the verifier performs
function-by-function verification. In that case, the sum of the
instructions processed in each global function and in the main program
counts towards the 1 million instructions limit. Only that sum is
reported in the verifier logs.
While starting to use global functions in Cilium (finally!), we found it
can be useful to have the breakdown per global function, to understand
exactly where the budget is currently spent. This patch implements this
breakdown, under BPF_LOG_STATS, as done for the stack depths.
When iterating over subprogs, we need to skip the hidden subprogs at the
end because they don't have a corresponding func_info_aux entry and
calling bpf_subprog_is_global() would result in an OOB access.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/bpf/5590f9c67e614ec9054d0c7e74e87cc690a52c56.1777538384.git.paul.chaignon@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
