| Age | Commit message (Collapse) | Author |
|---|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix sk_local_storage diag dump via netlink (Amery Hung)
- Fix off-by-one in arena direct-value access (Junyoung Jang)
- Reject TCP_NODELAY in bpf-tcp congestion control (KaFai Wan)
- Fix type confusion in bpf_*_sock() (Kuniyuki Iwashima)
- Reject TX-only AF_XDP sockets (Linpu Yu)
- Don't run arg-tracking analysis twice on main subprog (Paul Chaignon)
- Fix NULL pointer dereference in bpf_sk_storage_clone and fib lookup
(Weiming Shi)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix off-by-one boundary validation in arena direct-value access
xskmap: reject TX-only AF_XDP sockets
bpf: Don't run arg-tracking analysis twice on main subprog
bpf: Free reuseport cBPF prog after RCU grace period.
bpf: tcp: Fix type confusion in sol_tcp_sockopt().
bpf: tcp: Fix type confusion in bpf_skc_to_tcp6_sock().
bpf: tcp: Fix type confusion in bpf_skc_to_tcp_sock().
mptcp: bpf: Fix type confusion in bpf_mptcp_sock_from_subflow()
selftest: bpf: Add test for bpf_tcp_sock() and RAW socket.
bpf: tcp: Fix type confusion in bpf_tcp_sock().
tools/headers: Regenerate stddef.h to fix BPF selftests
bpf: Fix sk_local_storage diag dumping uninitialized special fields
bpf: Fix NULL pointer dereference in bpf_skb_fib_lookup()
sockmap: Fix sk_psock_drop() race vs sock_map_{unhash,close,destroy}().
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
selftests/bpf: Verify bpf-tcp-cc rejects TCP_NODELAY
selftests/bpf: Test TCP_NODELAY in TCP hdr opt callbacks
bpf: Reject TCP_NODELAY in bpf-tcp-cc
bpf: Reject TCP_NODELAY in TCP header option callbacks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
|
|
Add support for VHCA_ID-based page management mode. When the device
firmware advertises the icm_mng_function_id_mode capability with
MLX5_ID_MODE_FUNCTION_VHCA_ID, page management operations between the
driver and firmware may use vhca_id instead of function_id as the
effective function identifier, and the ec_function field is ignored.
Update page management commands to conditionally set ec_function field
only in FUNC_ID mode. Boot page allocation always uses FUNC_ID mode
semantics for backward compatibility, as the capability bit is only
available after set_hca_cap(). If after set_hca_cap() VHCA_ID mode was
set, modify the tracking of the boot pages in page_root_xa to use
vhca_id too.
Add mlx5_esw_vhca_id_to_func_type() to resolve the function type in
VHCA_ID mode, enabling per-type debugfs counters. Use a dedicated
vhca_type_map xarray, to provide lockless lookup. Store the resolved
type on each fw_page at allocation time so reclaim and release paths
read it directly without any lookup.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make the per function type debugfs page counters dynamically added after
mlx5_eswitch_init(). When page management operates in vhca_id mode, only
the function acting as either eSwitch or vport manager can initialize
the eSwitch structure and translate the vhca_id to function type for the
functions to which it supplies pages. The next patch will add support
for page management in vhca_id mode.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the genl_magic multi-include macro system with explicit
serialization and parsing.
The *_gen files were initially produced from a YNL spec via a
customized ynl-gen-c, but the DRBD netlink family is effectively
frozen, so the generator is kept unmodified.
All new functionality will land in a separate, properly-designed
family.
Carry the resulting code as ordinary in-tree source rather than
landing the spec and generator changes that produced it.
The bulk of the changes are mechanical renames to fit the YNL naming
conventions:
- Handler functions: drbd_adm_* -> drbd_nl_*_doit/dumpit
- GENL_MAGIC_VERSION -> DRBD_FAMILY_VERSION
- GENL_MAGIC_FAMILY_HDRSZ -> sizeof(struct drbd_genlmsghdr)
- drbd_genl_family -> drbd_nl_family
- Attribute IDs: T_* -> DRBD_A_*
Remove the nested_attr_tb static global buffer and move to a per-call
allocation approach: each deserialization manages its own nested
attribute table. This will be needed anyway when we eventually move
to parallel_ops, and it's actually simpler this way, so make the
move now.
Replace the functionality of the "sensitive" flag: this was only used
by a single field (shared_secret); open-code redaction logic for that
locally.
Also replace the "invariant" flag: this only had a couple of users,
and those basically never change. Hard code the check directly inline.
The genl_family struct itself is defined manually in drbd_nl.c.
Also replace a couple of drbd-specific wrappers (nla_put_u64_0pad,
drbd_nla_find_nested) with standard kernel functions while we're at
it.
Finally, completely remove the genl_magic system; DRBD was its only
user.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260506124541.1951772-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
drbd.h and drbd_limits.h contain only type definitions, enums, and
constants shared between kernel and userspace. These should be part of
UAPI.
Split the genl_api header into two: the genlmsghdr and the enums are
UAPI, the rest stays there for now (it will be removed by one of the
next commits in this series).
drbd_config.h is clearly DRBD-internal, so move it there.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260506124541.1951772-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some camera modules have XU controls that can configure the behaviour of
the privacy LED.
Block mapping of those controls, unless the module is configured with
a new parameter: allow_privacy_override.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
[johannes.goede@oss.qualcomm.com: Remove deprecation warning from param]
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The uvcdynctrl tool from libwebcam:
https://sourceforge.net/projects/libwebcam/
maps proprietary controls into v4l2 controls using the UVCIOC_CTRL_MAP
ioctl.
The tool has not been updated for 10+ years now, and there is no reason
for the UVC driver to not do the mapping by itself.
This patch adds the mappings from the uvcdynctrl into the driver. Hopefully
this effort can help in deprecating the UVCIOC_CTRL_MAP ioctl.
Some background about UVCIOC_CTRL_MAP (thanks Laurent for the context):
```
this was envisioned as the base of a vibrant ecosystem where a large
number of vendors would submit XML files that describe their XU control
mappings, at a pace faster than could be supported by adding XU mappings
to the driver. This vision failed to materialize and the tool has not
been updated for 10+ years now. There is no reason to believe the
situation will change.
```
During the porting, the following mappings where NOT imported because
they were not using standard v4l2 IDs. It is recommended that userspace
moves to UVCIOC_CTRL_QUERY for non standard controls.
{
.id = V4L2_CID_FLASH_MODE,
.entity = UVC_GUID_SIS_LED_HW_CONTROL,
.selector = 4,
.size = 4,
.offset = 0,
.v4l2_type = V4L2_CTRL_TYPE_MENU,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
.menu_mask = 0x3,
.menu_mapping = { 0x20, 0x22 },
.menu_names = { "Off", "On" },
},
{
.id = V4L2_CID_FLASH_FREQUENCY,
.entity = UVC_GUID_SIS_LED_HW_CONTROL,
.selector = 4,
.size = 8,
.offset = 16,
.v4l2_type = V4L2_CTRL_TYPE_INTEGER,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
},
{
.id = V4L2_CID_LED1_MODE,
.entity = UVC_GUID_LOGITECH_USER_HW_CONTROL_V1,
.selector = 1,
.size = 8,
.offset = 0,
.v4l2_type = V4L2_CTRL_TYPE_MENU,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
.menu_mask = 0xF,
.menu_mapping = { 0, 1, 2, 3 },
.menu_names = { "Off", "On", "Blinking", "Auto" },
},
{
.id = V4L2_CID_LED1_FREQUENCY,
.entity = UVC_GUID_LOGITECH_USER_HW_CONTROL_V1,
.selector = 1,
.size = 8,
.offset = 16,
.v4l2_type = V4L2_CTRL_TYPE_INTEGER,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
},
{
.id = V4L2_CID_DISABLE_PROCESSING,
.entity = UVC_GUID_LOGITECH_VIDEO_PIPE_V1,
.selector = 5,
.size = 8,
.offset = 0,
.v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
.data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
},
{
.id = V4L2_CID_RAW_BITS_PER_PIXEL,
.entity = UVC_GUID_LOGITECH_VIDEO_PIPE_V1,
.selector = 8,
.size = 8,
.offset = 0,
.v4l2_type = V4L2_CTRL_TYPE_INTEGER,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
},
{
.id = V4L2_CID_LED1_MODE,
.entity = UVC_GUID_LOGITECH_PERIPHERAL,
.selector = 0x09,
.size = 2,
.offset = 8,
.v4l2_type = V4L2_CTRL_TYPE_MENU,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
.menu_mask = 0xF,
.menu_mapping = { 0, 1, 2, 3 },
.menu_names = { "Off", "On", "Blink", "Auto" },
},
{
.id = V4L2_CID_LED1_FREQUENCY,
.entity = UVC_GUID_LOGITECH_PERIPHERAL,
.selector = 0x09,
.size = 8,
.offset = 24,
.v4l2_type = V4L2_CTRL_TYPE_INTEGER,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
},
This script has been used to generate the mappings. They were then
reformatted manually to follow the driver style.
import sys
import uuid
import re
import xml.etree.ElementTree as ET
def get_namespace(root):
return re.match(r"\{.*\}", root.tag).group(0)
def get_single_guid(ns, constant):
id = constant.find(ns + "id").text
value = constant.find(ns + "value").text
return (id, value)
def get_constants(ns, root):
out = dict()
for constant in root.iter(ns + "constant"):
attr = constant.attrib
if attr["type"] == "integer":
id, value = get_single_guid(ns, constant)
if id in out:
print(f"dupe constant {id}")
out[id] = value
return out
def get_guids(ns, root):
out = dict()
for constant in root.iter(ns + "constant"):
attr = constant.attrib
if attr["type"] == "guid":
id, value = get_single_guid(ns, constant)
if id in out:
print(f"dupe guid {id}")
out[id] = value
return out
def get_single_control(ns, control):
out = {}
for id in "entity", "selector", "index", "size", "description":
v = control.find(ns + id)
if v is None and id == "description":
continue
out[id] = v.text
reqs = set()
for r in control.find(ns + "requests"):
reqs.add(r.text)
out["requests"] = reqs
return (control.attrib["id"], out)
def get_controls(ns, root):
out = dict()
for control in root.iter(ns + "control"):
id, value = get_single_control(ns, control)
if id in out:
print(f"Dupe control id {id}")
out[id] = value
return out
def get_single_mapping(ns, mapping):
out = {}
out["name"] = mapping.find(ns + "name").text
uvc = mapping.find(ns + "uvc")
for id in "size", "offset", "uvc_type":
out[id] = uvc.find(ns + id).text
out["control_ref"] = uvc.find(ns + "control_ref").attrib["idref"]
v4l2 = mapping.find(ns + "v4l2")
for id in "id", "v4l2_type":
out[id] = v4l2.find(ns + id).text
menu = {}
for entry in v4l2.iter(ns + "menu_entry"):
menu[entry.attrib["name"]] = entry.attrib["value"]
if menu:
out["menu"] = menu
return out
def get_mapping(ns, root):
out = []
for control in root.iter(ns + "mapping"):
mapping = get_single_mapping(ns, control)
out += [mapping]
return out
def print_guids(guids):
for g in guids:
print(f"#define {g} \\")
u_bytes = uuid.UUID(guids[g]).bytes_le
u_bytes = [f"0x{b:02x}" for b in u_bytes]
print("\t{ " + ", ".join(u_bytes) + " }")
def print_flags(flags):
get_range = {"GET_MIN", "GET_DEF", "GET_MAX", "GET_CUR", "GET_RES"}
if get_range.issubset(flags):
flags -= get_range
flags.add("GET_RANGE")
flags = list(flags)
flags.sort()
out = ""
for f in flags[:-1]:
out += f"UVC_CTRL_FLAG_{f}\n\t\t\t\t| "
out += f"UVC_CTRL_FLAG_{flags[-1]}"
return out
def print_description(desc):
print("/*")
for line in desc.strip().splitlines():
print(f" * {line.strip()}")
print("*/")
def print_controls(controls, cons):
for id in controls:
c = controls[id]
if "description" in c:
print_description(c["description"])
print(
f"""\t{{
\t\t.entity\t\t= {c["entity"]},
\t\t.selector\t= {cons[c["selector"]]},
\t\t.index\t\t= {c["index"]},
\t\t.size\t\t= {c["size"]},
\t\t.flags\t\t= {print_flags(c["requests"])},
\t}},"""
)
def menu_mapping_txt(menu):
out = f"\n\t\t.menu_mask\t= 0x{((1<<len(menu))-1):X},\n"
out += f"\t\t.menu_mapping\t= {{ {", ".join(menu.values())} }},\n"
out += f"\t\t.menu_names\t= {{ \"{"\", \"".join(menu.keys())}\" }},\n"
return out
def print_mappings(mappings, controls, cons):
for m in mappings:
c = controls[m["control_ref"]]
if "menu" in m:
menu_mapping = menu_mapping_txt(m["menu"])
else:
menu_mapping = ""
print(
f"""\t{{
\t\t.id\t\t= {m["id"]},
\t\t.entity\t\t= {c["entity"]},
\t\t.selector\t= {cons[c["selector"]]},
\t\t.size\t\t= {m["size"]},
\t\t.offset\t\t= {m["offset"]},
\t\t.v4l2_type\t= {m["v4l2_type"]},
\t\t.data_type\t= {m["uvc_type"]},{menu_mapping}
\t}},"""
)
def print_code(guids, cons, controls, mappings):
used_controls = set()
for m in mappings:
used_controls.add(m["control_ref"])
used_guids = set()
for c in used_controls:
used_guids.add(controls[c]["entity"])
print("\n######GUIDs#######\n")
print_guids({id: guids[id] for id in guids if id in used_guids})
print("\n######CONTROLS#######\n")
print_controls({id: controls[id] for id in controls if id in used_controls}, cons)
print("\n######MAPPINGS#######\n")
print_mappings(mappings, controls, cons)
# print(guids)
# print(used_controls)
root = ET.fromstring(sys.stdin.read())
ns = get_namespace(root)
cons = get_constants(ns, root)
guids = get_guids(ns, root)
controls = get_controls(ns, root)
mappings = get_mapping(ns, root)
print_code(guids, cons, controls, mappings)
Cc: Manav Gautama <bandwidthcrunch@gmail.com>
Cc: Martin Rubli <martin_rubli@logitech.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add helpers to check whether a PCI resource is of I/O port or memory type.
These replace the open-coded pci_resource_flags() with IORESOURCE_IO and
IORESOURCE_MEM pattern used across the tree.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260508043543.217179-3-kwilczynski@kernel.org
|
|
Provide a helper allowing to locate an ACPI device by its name.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260504-baytrail-real-swnode-v5-1-c7878b69e383@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Mathias Stearn reports that since v6.19, there are two big issues
affecting rseq:
(1) On arm64 specifically, rseq critical sections aren't aborted when
they should be.
(2) The 'cpu_id_start' field is no longer written by the kernel in all
cases it used to be, including some cases where TCMalloc depends on
the kernel clobbering the field.
This patch fixes issue #1. This patch DOES NOT fix issue #2, which will
need to be addressed by other patches.
The arm64-specific brokenness is a result of commits:
2fc0e4b4126c ("rseq: Record interrupt from user space")
39a167560a61 ("rseq: Optimize event setting")
The first commit failed to add a call to rseq_note_user_irq_entry() on
arm64. Thus arm64 never sets rseq_event::user_irq to record that it may
be necessary to abort an active rseq critical section upon return to
userspace. On its own, this commit had no functional impact as the value
of rseq_event::user_irq was not consumed.
The second commit relied upon rseq_event::user_irq to determine whether
or not to bother to perform rseq work when returning to userspace. As
rseq_event::user_irq wasn't set on arm64, this work would be skipped,
and consequently an active rseq critical section would not be aborted.
Fix this by giving arm64 syscall-specific entry/exit paths, and
performing the relevant logic in syscall and non-syscall paths,
including calling rseq_note_user_irq_entry() for non-syscall entry.
Currently arm64 cannot use syscall_enter_from_user_mode(),
syscall_exit_to_user_mode(), and irqentry_exit_to_user_mode(), due to
ordering constraints with exception masking, and risk of ABI breakage
for syscall tracing/audit/etc. For the moment the entry/exit logic is
left as arm64-specific, directly using enter_from_user_mode() and
exit_to_user_mode(), but mirroring the generic code.
I intend to follow up with refactoring/cleanup, as we did for kernel
mode entry paths in commit:
041aa7a85390 ("entry: Split preemption from irqentry_exit_to_kernel_mode()")
... which will allow arm64 to use the GENERIC_IRQ_ENTRY functions directly.
Fixes: 39a167560a61 ("rseq: Optimize event setting")
Reported-by: Mathias Stearn <mathias@mongodb.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/regressions/CAHnCjA25b+nO2n5CeifknSKHssJpPrjnf+dtr7UgzRw4Zgu=oA@mail.gmail.com/
Link: https://patch.msgid.link/20260508142023.3268622-1-mark.rutland@arm.com
|
|
gpu_buddy APIs are expected to be called with the driver-provided lock
held, but there is no runtime enforcement of this contract. Add lockdep
annotations to catch locking violations early.
Introduce gpu_buddy_driver_set_lock() for the driver to register the
lock that protects the buddy manager. Add gpu_buddy_driver_lock_held()
assertions to all exported gpu_buddy and drm_buddy APIs that
access/modify the manager state. The lock_dep_map field is only compiled
in when CONFIG_LOCKDEP is enabled, adding zero overhead to production
builds.
Wire up xe_ttm_vram_mgr to register its mutex with the buddy manager
after initialization.
Assisted-by: Copilot:claude-opus-4.6
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260508065544.4049240-2-tejas.upadhyay@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
|
|
Previous change added xtables_unregister_table_pre_exit to detach the
table from the packetpath and to unlink it from the active table list.
In case of rmmod, userspace that is doing set/getsockopt for this table
will not be able to re-instantiate the table:
1. The larval table has been removed already
2. existing instantiated table is no longer on the xt pernet table list.
This adds the second stage helper:
unlink the table from the dying list, free the hook ops (if any) and do
the audit notification. It replaces xt_unregister_table().
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Reported-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Remove the copypasted variants of _pre_exit and add one single
function in the xtables core. ebtables is not compatible with
x_tables and therefore unchanged.
This is a preparation patch to reduce noise in the followup
bug fixes.
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
arp/ip(6)t_register_table() add the table to the per-netns list via
xt_register_table() before allocating the per-netns hook ops copy
via kmemdup_array(). This leaves a window where the table is
visible in the list with ops=NULL.
If the pernet exit happens runs concurrently the pre_exit callback finds
the table via xt_find_table() and passes the NULL ops pointer to
nf_unregister_net_hooks(), causing a NULL dereference:
general protection fault in nf_unregister_net_hooks+0xbc/0x150
RIP: nf_unregister_net_hooks (net/netfilter/core.c:613)
Call Trace:
ipt_unregister_table_pre_exit
iptable_mangle_net_pre_exit
ops_pre_exit_list
cleanup_net
Fix by moving the ops allocation into the xtables core so the table is
never in the list without valid ops. Also ensure the table is no longer
processing packets before its torn down on error unwind.
nf_register_net_hooks might have published at least one hook; call
synchronize_rcu() if there was an error.
audit log register message gets deferred until all operations have
passed, this avoids need to emit another ureg message in case of
error unwinding.
Based on earlier patch by Tristan Madani.
Fixes: f9006acc8dfe5 ("netfilter: arp_tables: pass table pointer via nf_hook_ops")
Fixes: ee177a54413a ("netfilter: ip6_tables: pass table pointer via nf_hook_ops")
Fixes: ae689334225f ("netfilter: ip_tables: pass table pointer via nf_hook_ops")
Link: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc3).
Conflicts:
net/ipv4/igmp.c
726fa7da2d8c ("ipv4: igmp: get rid of IGMPV3_{QQIC,MRC} and simplify calculation")
c6bebaa744f7 ("ipv4: igmp: annotate data-races in igmp_heard_query()")
https://lore.kernel.org/a7365e4873340f7a5e30411207de3bf9@kernel.org
Adjacent changes:
net/psp/psp_main.c
30cb24f97d44 ("psp: strip variable-length PSP header in psp_dev_rcv()")
c2b22277ad89 ("psp: validate IPv4 header fields in psp_dev_rcv()")
net/sched/sch_fq_codel.c
f83e07b29246 ("net/sched: sch_fq_codel: annotate data-races from fq_codel_dump_class_stats()")
3f3aa77ff1c8 ("net/sched: add qstats_cpu_drop_inc() helper")
net/wireless/pmsr.c
0f3c0a197309 ("wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage")
410aa47fd9d3 ("wifi: cfg80211: allow suppressing FTM result reporting for PD requests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, IPsec, Bluetooth and WiFi.
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that IPv6
itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi:
- cw1200: revert "Fix locking in error paths"
- ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix:
- fix an issue between garbage collection and PEEK
- fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)"
* tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (190 commits)
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
net: sparx5: fix wrong chip ids for TSN SKUs
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
tcp: Fix dst leak in tcp_v6_connect().
ipmr: Call ipmr_fib_lookup() under RCU.
net: phy: broadcom: Save PHY counters during suspend
net/smc: fix missing sk_err when TCP handshake fails
af_unix: Reject SIOCATMARK on non-stream sockets
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
eth: fbnic: fix double-free of PCS on phylink creation failure
net: ethernet: cortina: Drop half-assembled SKB
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
selftests: mptcp: check output: catch cmd errors
mptcp: pm: prio: skip closed subflows
mptcp: pm: ADD_ADDR rtx: return early if no retrans
mptcp: pm: ADD_ADDR rtx: skip inactive subflows
mptcp: pm: ADD_ADDR rtx: resched blocked ADD_ADDR quicker
mptcp: pm: ADD_ADDR rtx: free sk if last
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
mptcp: pm: ADD_ADDR rtx: fix potential data-race
...
|
|
With no more users, we can remove timb_gpio.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-timberdale-swnode-v3-4-9a1bc1b2b124@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit
3b497c3f4f04 ("fs/resctrl: Introduce the interface to display monitoring modes")
introduced CONFIG_RESCTRL_ASSIGN_FIXED but left adding the Kconfig
entry until it was necessary. The counter assignment mode is fixed in
MPAM, even when there are assignable counters, and so addressing this
is needed to support MPAM.
To avoid the burden of another Kconfig entry, replace
CONFIG_RESCTRL_ASSIGN_FIXED with a new property in 'struct resctrl_mon',
'mbm_cntr_assign_fixed' to be set by the architecture.
Do not request the architecture to change the counter assignment mode if it
does not support doing so. Provide insight to user space about why such a
request fails.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
|
|
Merge drm-next to bring the drm_atomic_state renaming patch.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
In some cases a driver using services of vsec_tpmi driver requires some
processing before vsec_tpmi exits. For example a children using debugfs
can't use debugfs as this will be deleted by the vsec_tpmi driver.
This is the case when unbind using PCI driver interface. In this case
the remove callback of vsec_tpmi driver is called first, then remove
callback of its children.
Add support of blocking chain notifiers support. Notify on successful probe
and before clean up in the remove callback.
Fixes: 811f67c51636 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stable@vger.kernel.org
Link: https://patch.msgid.link/20260430151103.1549733-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Pull smb server fixes from Steve French:
- Fix memory leak in connection free
- Fix inherited ACL ACE validation
- Minor cleanup
- Fix for share config
- Fix durable handle cleanup race
- Fix close_file_table_ids in session teardown
- smbdirect fixes:
- Fix memory region registration
- Two fixes for out-of-tree builds
* tag 'v7.1-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate inherited ACE SID length
ksmbd: fix kernel-doc warnings from ksmbd_conn_get/put()
ksmbd: fail share config requests when path allocation fails
ksmbd: close durable scavenger races against m_fp_list lookups
ksmbd: harden file lifetime during session teardown
ksmbd: centralize ksmbd_conn final release to plug transport leak
smb: smbdirect: fix MR registration for coalesced SG lists
smb: smbdirect: introduce and use include/linux/smbdirect.h
smb: smbdirect: make use of DEFAULT_SYMBOL_NAMESPACE and EXPORT_SYMBOL_GPL
|
|
This driver supports both SPI and MMIO based register access, but only
the former has devicetree support. While MMIO mode would have worked
with old-style board files, those have never defined such a device
upstream.
Remove the MMIO mode, leaving SPI as the only way to use this driver,
but leave it in two loadable modules. More cleanups can be done by
combining the two into one file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505180459.1247690-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Representor callbacks can be registered and unregistered while the
E-Switch is already in switchdev mode, and the same E-Switch may also be
reconfigured by devlink, VF changes and SF changes. Serialize these paths
with the per-E-Switch representor mutex instead of relying on ad-hoc bit
state and wait queues.
Take the representor lock around the mode transition, VF/SF representor
changes and representor ops registration. Keep mode_lock and the
representor lock unnested by using the operation flag while the mode lock
is dropped. During mode changes, drop the representor lock around the
auxiliary bus rescan because driver bind/unbind may register or unregister
representor ops.
Split representor ops registration into locked public wrappers and blocked
internal helpers, clear the ops pointer on unregister, and add nested
wrappers for the shared-FDB master IB path that registers peer
representor ops while another E-Switch representor lock is already held.
On unregister, always call __unload_reps_all_vport() before marking reps
unregistered and clearing rep_ops. The per-representor state check makes
this a no-op for types that were not loaded, so unregister no longer has
to infer load state from esw->mode.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260503202726.266415-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add kernel-doc for one struct member and use the correct function name
to eliminate kernel-doc warnings:
Warning: include/linux/platform_data/spi-s3c64xx.h:40 struct member
'polling' not described in 's3c64xx_spi_info'
Warning: include/linux/platform_data/spi-s3c64xx.h:51 expecting prototype
for s3c64xx_spi_set_platdata(). Prototype was for
s3c64xx_spi0_set_platdata() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260506175144.449364-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
configurable
When the counter assignment mode is mbm_event resctrl assumes the MBM
events are configurable and exposes the 'event_filter' files. These files
live at info/L3_MON/event_configs/<event>/event_filter and are used to
display and set the event configuration.
The MPAM architecture has support for configuring the memory bandwidth
utilization (MBWU) counters to only count reads or only count
writes. However, in MPAM, this event filtering support is optional in the
hardware (and not yet implemented in the MPAM driver) but MBM counter
assignment is always possible for MPAM MBWU counters.
In order to support mbm_event mode with MPAM, create the 'event_filter'
files read only if the event configuration can't be changed. A user can
still chmod the file and so also return early with an error from
event_filter_write().
Introduce a new monitor property, mbm_cntr_configurable, to indicate
whether or not assignable MBM counters are configurable. On x86, set this
to true whenever mbm_cntr_assignable is true to keep existing behaviour.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
|
|
C1-Pro cores with SME have an erratum where TLBI+DSB does not complete
all outstanding SME accesses. Instead a DSB needs to be executed on the
affected CPUs. The implication is that pages cannot be unmapped from the
host Stage 2 and then provided to a protected guest or to the
hypervisor. Host SME accesses may still complete after this point.
This erratum breaks pKVM's guarantees, and the workaround is hard to
implement as EL2 and EL1 share a security state meaning EL1 can mask
IPIs sent by EL2, leading to interrupt blackouts.
Instead, do this in EL3. This has the advantage of a separate security
state, meaning lower EL cannot mask the IPI. It is also simpler for EL3
to know about CPUs that are off or in PSCI's CPU_SUSPEND.
Add the needed hook to host_stage2_set_owner_metadata_locked(). This
covers the cases where the host loses access to a page:
__pkvm_host_donate_guest()
__pkvm_guest_unshare_host()
host_stage2_set_owner_locked() when owner_id == PKVM_ID_HYP
Since pKVM relies on the firmware call for correctness, check for the
firmware counterpart during protected KVM initialisation and fail the
pKVM initialisation if it is missing.
Signed-off-by: James Morse <james.morse@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/20260505165205.2690919-1-catalin.marinas@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The optimized RSEQ V2 mode requires that user space adheres to the ABI
specification and does not modify the read-only fields cpu_id_start,
cpu_id, node_id and mm_cid behind the kernel's back.
While the kernel does not rely on these fields, the adherence to this is a
fundamental prerequisite to allow multiple entities, e.g. libraries, in an
application to utilize the full potential of RSEQ without stepping on each
other toes.
Validate this adherence on every update of these fields. If the kernel
detects that user space modified the fields, the application is force
terminated.
Fixes: d6200245c75e ("rseq: Allow registering RSEQ with slice extension")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/20260428224427.845230956%40kernel.org
Cc: stable@vger.kernel.org
|
|
request_firmware_nowait() keeps the callback module pinned and holds
a device reference until the firmware work completes.
Callers still have no way to cancel or synchronize the queued callback
before tearing down their driver-private state.
Track scheduled async firmware work in an internal list and add
request_firmware_nowait_cancel(). The helper cancels work matching the
device, callback context and callback function. It cancels work that has
not started yet and waits for an already-running callback to return. If
the request has already completed, it is a no-op.
Keep the existing request_firmware_nowait() lifetime model manual. A
devres-managed variant can be layered on top separately if needed.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260505-alsa-hda-tas2781-fw-callback-teardown-v4-1-e7c4bf930dc8@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Lots of new content in cfg80211/mac80211, notably
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
* tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (70 commits)
wifi: mac80211: explicitly disable FTM responder on AP stop
wifi: iwlwifi: don't blindly start the responder upon BSS_CHANGED_FTM_RESPONDER
wifi: mac80211_hwsim: claim HT STBC capability
wifi: mac80211_hwsim: enable NAN_DATA interface simulation support
wifi: mac80211_hwsim: Support Tx of multicast data on NAN
wifi: mac80211_hwsim: Do not declare support for NDPE
wifi: mac80211_hwsim: Declare support for secure NAN
wifi: mac80211_hwsim: add NAN data path TX/RX support
wifi: mac80211_hwsim: set HAS_RATE_CONTROL when using NAN
wifi: mac80211_hwsim: implement NAN schedule callbacks
wifi: mac80211_hwsim: add NAN PHY capabilities
wifi: mac80211_hwsim: add NAN_DATA interface limits
wifi: mac80211_hwsim: implement NAN synchronization
wifi: mac80211_hwsim: protect tsf_offset using a spinlock
wifi: mac80211_hwsim: only RX on NAN when active on a slot
wifi: mac80211_hwsim: select NAN TX channel based on current TSF
wifi: mac80211_hwsim: limit TX of frames to the NAN DW
wifi: cfg80211: don't allow NAN DATA on multi radio devices
wifi: mac80211: check AP using NPCA has NPCA capability
wifi: mac80211: don't parse full UHR operation from beacons
...
====================
Link: https://patch.msgid.link/20260506111147.224296-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
hrtimer_get_next_event()/hrtimer_next_event_without()
These functions really work in terms of ktime_t and not u64.
Change their return types and adapt the callers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260504-hrtimer-next_event-v2-1-7a5d0550b42f@linutronix.de
|
|
Remove the unused functions __clocksource_update_freq_hz() and
__clocksource_update_freq_khz().
Then make __clocksource_update_freq_scale() static as it is not used
from external callers anymore. Also clean up the comment accordingly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260504-clocksource-update_freq-v2-1-3e696fb01776@linutronix.de
|
|
There are no remaining static platform_device users of pxa2xx ac97,
so the rest of that code path can go away as well.
Since nothing in the driver uses the gpio number now, constrain the use
of the legacy gpio interface to the architecture specific code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505202426.3605262-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Nothing ever sets pxa2xx_audio_ops_t since the last users were removed
in ce79f3a1ad5f ("ARM: pxa: prune unused device support") , so stop
passing it around through the sound, ac97 code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505202426.3605262-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Fix devm_alloc_workqueue() passing a va_list as a positional arg to
the variadic alloc_workqueue() macro, which garbled wq->name and
skipped lockdep init on the devm path. Fold both noprof entry points
onto a va_list helper.
Also, annotate it using __printf(1, 0)
* tag 'wq-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Annotate alloc_workqueue_va() with __printf(1, 0)
workqueue: fix devm_alloc_workqueue() va_list misuse
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- During v6.19, cgroup task unlink was moved from do_exit() to after the
final task switch to satisfy a controller invariant. That left the kernel
seeing tasks past exit_signals() longer than userspace expected, and
several v7.0 follow-ups tried to bridge the gap by making rmdir wait for
the kernel side. None held up.
The latest is an A-A deadlock when rmdir is invoked by the reaper of
zombies whose pidns teardown the rmdir itself is waiting on, which
points at the synchronizing approach being fundamentally wrong.
Take a different approach: drop the wait, leave rmdir's user-visible
side returning as soon as cgroup.procs is empty, and defer the css
percpu_ref kill that drives ->css_offline() until the cgroup is fully
depopulated.
Tagged for stable. Somewhat invasive but contained. The hope is that
fixing forward sticks. If not, the fallback is to revert the entire
chain and rework on the development branch.
Note that this doesn't plug a pre-existing analogous race in
cgroup_apply_control_disable() (controller disable via
subtree_control). Not a regression. The development branch will do
the more invasive restructuring needed for that.
- Documentation update for cgroup-v1 charge-commit section that still
referenced functions removed when the memcg hugetlb try-commit-cancel
protocol was retired.
* tag 'cgroup-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1: Update charge-commit section
cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix idle CPU selection returning prev_cpu outside the task's cpus_ptr
when the BPF caller's allowed mask was wider. Stable backport.
- Two opposite-direction gaps in scx_task_iter's cgroup-scoped mode
versus the global mode:
- Tasks past exit_signals() are filtered by the cgroup walk but kept
by global. Sub-scheduler enable abort leaked __scx_init_task()
state. Add a CSS_TASK_ITER_WITH_DEAD flag to cgroup's task
iterator (scx_task_iter is its only user) and use it.
- Tasks past sched_ext_dead() are still returned, tripping
WARN_ON_ONCE() in callers or making them touch torn-down state.
Mark and skip under the per-task rq lock.
* tag 'sched_ext-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Recheck prev_cpu after narrowing allowed mask
sched_ext: Skip past-sched_ext_dead() tasks in scx_task_iter_next_locked()
cgroup, sched_ext: Include exiting tasks in cgroup iter
|
|
Add device IDs for the next generation of switchtec products.
No changes to the driver were required with the new version of the
hardware.
[logang: rewrote commit message]
Signed-off-by: Ben Reed <Ben.Reed@microchip.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260505161633.67454-1-logang@deltatee.com
|
|
Rename struct scmi_revision_info to struct scmi_base_info , to
accurately represent its content. The scmi_revision_info is no
longer accurate, because the structure now contains more than
only SCMI base protocol revision, it now also contains number
of protocols, agents, vendor and subvendor strings. All those
are fetched from the base protocol, so rename the structure to
scmi_base_info, to match the other scmi_*_info structure names.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260406155343.72087-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
MISC protocol supports getting reset reason per Logical Machine or
System. Add the API for user to retrieve the information from System
Manager.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260305-scmi-imx-reset-v1-1-18de78978ba9@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The recent RSEQ optimization work broke the TCMalloc abuse of the RSEQ ABI
as it not longer unconditionally updates the CPU, node, mm_cid fields,
which are documented as read only for user space. Due to the observed
behavior of the kernel it was possible for TCMalloc to overwrite the
cpu_id_start field for their own purposes and rely on the kernel to update
it unconditionally after each context switch and before signal delivery.
The RSEQ ABI only guarantees that these fields are updated when the data
changes, i.e. the task is migrated or the MMCID of the task changes due to
switching from or to per CPU ownership mode.
The optimization work eliminated the unconditional updates and reduced them
to the documented ABI guarantees, which results in a massive performance
win for syscall, scheduling heavy work loads, which in turn breaks the
TCMalloc expectations.
There have been several options discussed to restore the TCMalloc
functionality while preserving the optimization benefits. They all end up
in a series of hard to maintain workarounds, which in the worst case
introduce overhead for everyone, e.g. in the scheduler.
The requirements of TCMalloc and the optimization work are diametral and
the required work arounds are a maintainence burden. They end up as fragile
constructs, which are blocking further optimization work and are pretty
much guaranteed to cause more subtle issues down the road.
The optimization work heavily depends on the generic entry code, which is
not used by all architectures yet. So the rework preserved the original
mechanism moslty unmodified to keep the support for architectures, which
handle rseq in their own exit to user space loop. That code is currently
optimized out by the compiler on architectures which use the generic entry
code.
This allows to revert back to the original behaviour by replacing the
compile time constant conditions with a runtime condition where required,
which disables the optimization and the dependend time slice extension
feature until the run-time condition can be enabled in the RSEQ
registration code on a per task basis again.
The following changes are required to restore the original behavior, which
makes TCMalloc work again:
1) Replace the compile time constant conditionals with runtime
conditionals where appropriate to prevent the compiler from optimizing
the legacy mode out
2) Enforce unconditional update of IDs on context switch for the
non-optimized v1 mode
3) Enforce update of IDs in the pre signal delivery path for the
non-optimized v1 mode
4) Enforce update of IDs in the membarrier(RSEQ) IPI for the
non-optimized v1 mode
5) Make time slice and future extensions depend on optimized v2 mode
This brings back the full performance problems, but preserves the v2
optimization code and for generic entry code using architectures also the
TIF_RSEQ optimization which avoids a full evaluation of the exit to user
mode loop in many cases.
Fixes: 566d8015f7ee ("rseq: Avoid CPU/MM CID updates when no event pending")
Reported-by: Mathias Stearn <mathias@mongodb.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Closes: https://lore.kernel.org/CAHnCjA25b+nO2n5CeifknSKHssJpPrjnf+dtr7UgzRw4Zgu=oA@mail.gmail.com
Link: https://patch.msgid.link/20260428224427.517051752%40kernel.org
Cc: stable@vger.kernel.org
|
|
UHR defines bit 8 to mean multi-link power management, add
a definition for it. Also reindent the other definitions to
use tabs, not spaces.
Link: https://patch.msgid.link/20260428110915.c6b6a06016cf.I7ebd97397507d320124547017e21191b55c5d34d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since 802.11bn D1.4 the DBE capabilities are after the
PHY capabilities, not between MAC and PHY, adjust the
code accordingly.
Also add a struct for DBE capabilities and use it for
checking the correct length instead of hard-coding the
lengths.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260428103657.b40af50f182d.I75306a092dc2c8a9eb7276160f0b7144b4846d18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add an optional .release_mux() callback to struct pinmux_ops.
Some drivers acquire additional resources in .set_mux(), such as software
locks. These resources may need to be released when the mux function is no
longer active. Introducing a dedicated .release_mux() callback allows
drivers to clean up such resources.
The callback is optional and does not affect existing drivers.
Commit 2243a87d90b42 ("pinctrl: avoid duplicated calling
enable_pinmux_setting for a pin") removed the .disable() callback
to resolve two issues:
1. desc->mux_usecount increasing monotonically
2. Hardware glitches caused by repeated .disable()/.enable() calls
Adding .release_mux() does not reintroduce those problems. The callback is
intended only for releasing driver-side resources (e.g. locks) and must not
modify hardware registers.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add new API devm_mux_state_get_from_np() to retrieve a mux control from
a specified child device node.
Make devm_mux_state_get() call devm_mux_state_get_from_np() with a NULL
node parameter, which defaults to using the device's own of_node.
Support the following DT schema:
pinctrl@0 {
uart-func {
mux-state = <&mux_chip 0>;
};
spi-func {
mux-state = <&mux_chip 1>;
};
};
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Firmware connection manager supports only one DMA tunnel per XDomain
connection. Firmware prior Intel Titan Ridge failed the operation
directly but the same does not happen anymore on Titan Ridge and
forward. For this reason add an explicit check, and fail the operation
accordingly in the driver.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We should not call nhi_shutdown() before the domain structure and the
control channel rings are completely released. Otherwise we might
release resources like the nhi->msix_ida that are still referenced in
tb_domain_release(). For this reason wait for the tb_domain_release() to
be completed before continuing to nhi_shutdown() and eventually
releasing of the rest of the data structures.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Currently there is no way to install an LTF key seed that can be
used in non-trigger-based (NTB) and trigger-based (TB) FTM ranging
to protect NDP frames. Without this, drivers cannot enable PHY-layer
security for peer measurement sessions, leaving ranging measurements
vulnerable to eavesdropping and manipulation.
Introduce NL80211_KEY_LTF_SEED attribute and the dedicated extended
feature flag NL80211_EXT_FEATURE_SET_KEY_LTF_SEED to allow drivers
to advertise and install LTF key seeds via nl80211. The key seed
must be configured beforehand to ensure the peer measurement session
is secure. The driver must advertise both NL80211_EXT_FEATURE_SECURE_LTF
and NL80211_EXT_FEATURE_SET_KEY_LTF_SEED for the key seed installation
to be permitted.
The LTF key seed is pairwise key material and must only be used with
pairwise key type. Reject attempts to use it with other key types.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-13-peddolla.reddy@oss.qualcomm.com
[fix policy coding style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use correct struct member names and formats to avoid kernel-doc
warnings:
Warning: include/linux/soc/ti/knav_dma.h:83 struct member 'priority' not
described in 'knav_dma_tx_cfg'
Warning: include/linux/soc/ti/knav_dma.h:113 struct member 'err_mode' not
described in 'knav_dma_rx_cfg'
Warning: include/linux/soc/ti/knav_dma.h:113 struct member 'desc_type' not
described in 'knav_dma_rx_cfg'
Warning: include/linux/soc/ti/knav_dma.h:113 struct member 'fdq' not
described in 'knav_dma_rx_cfg'
Warning: include/linux/soc/ti/knav_dma.h:127 struct member 'direction' not
described in 'knav_dma_cfg'
Warning: include/linux/soc/ti/knav_dma.h:127 struct member 'u' not
described in 'knav_dma_cfg'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260301011228.3064940-1-rdunlap@infradead.org
Signed-off-by: Nishanth Menon <nm@ti.com>
|
