| Age | Commit message (Collapse) | Author |
|---|
|
Add core driver to support MAX7360 i2c chip, multi function device
with keypad, GPIO, PWM, GPO and rotary encoder submodules.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Co-developed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-2-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The Nuvoton NCT6694 provides an USB interface to the host to
access its features.
Sub-devices can use the USB functions nct6694_read_msg() and
nct6694_write_msg() to issue a command. They can also request
interrupt that will be called when the USB device receives its
interrupt pipe.
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-2-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Merge series from Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>:
This patchset adds support for the max77838 PMIC. It's used on the Galaxy
S7 lineup of phones, and provides regulators for the display.
|
|
Add WRITE_LIFE_HINT_NR into the rw_hint enum to define the number of
values write life time hints can be set to. This is useful for e.g.
file systems which may want to map these values to allocation groups.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of fixes for the 6.17 cycle (or 6.18 merge window)
adi,ad5360
- Use a signed int type to be able to hold a potential error return.
adi,ad5421
- Use a signed int type to be able to hold a potential error return.
adi,adf4350
- Ensure rules on VCO frequency and prescaler values are met.
- Fix a wrong offset for the clock divisor control field.
xilinx,ams
- Unmask alarms correctly if an event is disabled and re-enabled.
- Fix a wrong register field mask.
* tag 'iio-fixes-for-6.17b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad5421: use int type to store negative error codes
iio: dac: ad5360: use int type to store negative error codes
iio: frequency: adf4350: Fix ADF4350_REG3_12BIT_CLKDIV_MODE
iio: frequency: adf4350: Fix prescaler usage.
iio: xilinx-ams: Fix AMS_ALARM_THR_DIRECT_MASK
iio: xilinx-ams: Unmask interrupts after updating alarms
iio/adc/pac1934: fix channel disable configuration
|
|
Conflicts:
arch/x86/include/asm/sev.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The event mapping function can be used in event info function to find out
the corresponding SBI PMU event encoding during the get_event_info function
as well. Refactor and export it so that it can be invoked from kvm and
internal driver.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Paul Walmsley <pjw@kernel.org>
Link: https://lore.kernel.org/r/20250909-pmu_event_info-v6-5-d8f80cacb884@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
callers have no business modifying the paths they get
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and use that to constify the pointers in callers
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
for the method and its sole instance...
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Callers never use the resulting pointer to modify the struct path it
points to (nor should they).
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Turn d_name into an anon union of const struct qstr d_name with
struct qstr __d_name. Very few places need to modify it (all
in fs/dcache.c); those are switched to use of ->__d_name.
Note that ->d_name can actually change under you unless you have
the right locking environment; this const just prohibits accidentally
doing stores without being easily spotted.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Nothing outside of fs/dcache.c has any business modifying
dentry names; passing &dentry->d_name as an argument should
have that argument declared as a const pointer.
Acked-by: Casey Schaufler <casey@schaufler-ca.com> # smack part
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
At present the parameters to compute timeout time for split transaction is
protected by card-wide spin lock, while it is not necessarily convenient
in a point to narrower critical section.
This commit adds and uses another spin lock specific for the purpose.
Link: https://lore.kernel.org/r/20250915234747.915922-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The list of instance for asynchronous transaction to wait for response
subaction is maintained as a member of fw_card structure. The card-wide
spinlock is used at present for any operation over the list, however it
is not necessarily suited for the purpose.
This commit adds and uses the spin lock specific to maintain the list.
Link: https://lore.kernel.org/r/20250915234747.915922-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
At present, the operation for read transaction to topology map register is
not protected by any kind of lock primitives. This causes a potential
problem to result in the mixed content of topology map.
This commit adds and uses spin lock specific to topology map.
Link: https://lore.kernel.org/r/20250915234747.915922-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The list of receivers for phy packet is used only by cdev layer, while it
is maintained as a member of fw_card structure.
This commit maintains the list locally in cdev layer.
Link: https://lore.kernel.org/r/20250915234747.915922-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Use the first 3-byte hole at the beginning of the tcp_sock_write_txrx
group for 'noneagle'/'rate_app_limited' to fill in the existing hole
in later patches. Therefore, the group size of tcp_sock_write_txrx is
reduced from 92 + 4 to 91 + 4. In addition, the group size of
tcp_sock_write_rx is changed to 96 to fit in the pahole outcome.
Below are the trimmed pahole outcomes before and after this patch:
[BEFORE THIS PATCH]
struct tcp_sock {
[...]
__cacheline_group_begin__tcp_sock_write_txrx[0]; /* 2521 0 */
/* XXX 3 bytes hole, try to pack */
[...]
struct tcp_options_received rx_opt; /* 2588 24 */
u8 nonagle:4; /* 2612: 0 1 */
u8 rate_app_limited:1; /* 2612: 4 1 */
/* XXX 3 bits hole, try to pack */
__cacheline_group_end__tcp_sock_write_txrx[0]; /* 2613 0 */
/* XXX 3 bytes hole, try to pack */
__cacheline_group_begin__tcp_sock_write_rx[0] __attribute__((__aligned__(8))); /* 2616 0 */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2712 0 */
[...]
/* size: 3200, cachelines: 50, members: 161 */
}
[AFTER THIS PATCH]
struct tcp_sock {
[...]
__cacheline_group_begin__tcp_sock_write_txrx[0]; /* 2521 0 */
u8 nonagle:4; /* 2521: 0 1 */
u8 rate_app_limited:1; /* 2521: 4 1 */
/* XXX 3 bits hole, try to pack */
/* XXX 2 bytes hole, try to pack */
[...]
struct tcp_options_received rx_opt; /* 2588 24 */
__cacheline_group_end__tcp_sock_write_txrx[0]; /* 2612 0 */
/* XXX 4 bytes hole, try to pack */
__cacheline_group_begin__tcp_sock_write_rx[0] __attribute__((__aligned__(8))); /* 2616 0 */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2712 0 */
[...]
/* size: 3200, cachelines: 50, members: 161 */
}
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250911110642.87529-4-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bpf_cgroup_from_id kfunc relies on cgroup_get_from_id to obtain the
cgroup corresponding to a given cgroup ID. This helper can be called in
a lot of contexts where the current thread can be random. A recent
example was its use in sched_ext's ops.tick(), to obtain the root cgroup
pointer. Since the current task can be whatever random user space task
preempted by the timer tick, this makes the behavior of the helper
unreliable.
Refactor out __cgroup_get_from_id as the non-namespace aware version of
cgroup_get_from_id, and change bpf_cgroup_from_id to make use of it.
There is no compatibility breakage here, since changing the namespace
against which the lookup is being done to the root cgroup namespace only
permits a wider set of lookups to succeed now. The cgroup IDs across
namespaces are globally unique, and thus don't need to be retranslated.
Reported-by: Dan Schatzberg <dschatzberg@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250915032618.1551762-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The TEE subsystem allows session-based access to trusted services,
requiring a session to be established to receive a service. This
is not suitable for an environment that represents services as objects.
An object supports various operations that a client can invoke,
potentially generating a result or a new object that can be invoked
independently of the original object.
Add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT/OUTPUT/INOUT to represent an
object. Objects may reside in either TEE or userspace. To invoke an
object in TEE, introduce a new ioctl. Use the existing SUPPL_RECV and
SUPPL_SEND to invoke an object in userspace.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
For drivers that can transfer data to the TEE without using shared
memory from client, it is necessary to receive the user address
directly, bypassing any processing by the TEE subsystem. Introduce
TEE_IOCTL_PARAM_ATTR_TYPE_UBUF_INPUT/OUTPUT/INOUT to represent
userspace buffers.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The tee_context can be used to manage TEE user resources, including
those allocated by the driver for the TEE on behalf of the user.
The release() callback is invoked only when all resources, such as
tee_shm, are released and there are no references to the tee_context.
When a user closes the device file, the driver should notify the
TEE to release any resources it may hold and drop the context
references. To achieve this, a close_context() callback is
introduced to initiate resource release in the TEE driver when
the device file is closed.
Relocate teedev_ctx_get, teedev_ctx_put, tee_device_get, and
tee_device_get functions to tee_core.h to make them accessible
outside the TEE subsystem.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
'20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-2-17f07a942b8d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux
firmware: qcom: tzmem: export shm_bridge create/delete
firmware: qcom: scm: add support for object invocation
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The !CONFIG_IO_URING signature is wrong, fix that up. The non stub
signature got updated for the io_br_sel changes that happened before
this patch went in, but the stub one did not.
Fixes: 620a50c92700 ("io_uring: uring_cmd: add multishot support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a driver for the AMD Versal NET DDR memory controller which supports
single bit error correction, double bit error detection and other system
errors from various IP subsystems (e.g., RPU, NOCs, HNICX, PL).
The driver listens for notifications from the NMC (Network management
controller) using RPMsg (Remote Processor Messaging).
The channel used for communicating to RPMsg is named "error_edac". Upon
receipt of a notification, the driver sends a RAS event trace.
[ bp:
- Fixup title
- Rewrite commit message
- Fixup Kconfig text
- Zap unused defines and align them
- Simplify rpmsg_cb() considerably
- Drop silly double-brackets in conditionals
- Use proper void * type in mcdi_request()
- Do not clear chinfo in rpmsg_probe() unnecessarily
- Fix indentation
- Do a proper err unwind path in init_versalnet()
- Redo the error unwind path in mc_probe() properly
- Fix the ordering in mc_remove()
]
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250908115649.22903-1-shubhrajyoti.datta@amd.com
Link: https://lore.kernel.org/r/20250703173105.GLaGa-WQCESDNsqygm@fat_crate.local
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates/fixes for v6.18
These SCMI changes bring a mix of improvements, fixes, and cleanups:
1. Device Tree bindings - allow multiple SCMI instances by suffixing
node names (Nikunj Kela).
2. Code hardening - constify both scmi_{transport,voltage_proto}_ops
so they reside in read-only memory (Christophe JAILLET).
3. VirtIO transport initialization - set DRIVER_OK before SCMI probing
to prevent potential stalls; while recent rework removes the practical
risk, this ensures correctness (Junnan Wu).
4. Quirk handling - fix a critical bug by preventing writes to string
constants, avoiding faults in read-only memory (Johan Hovold).
5. i.MX SCMI MISC protocol - extend support to discover board info,
retrieve configuration and build data, and document the new
MISC_BOARD_INFO command; all handled gracefully if unsupported (Peng Fan).
6. Logging cleanup - simplify device tree node name logging by using
the %pOF format to print full paths (Krzysztof Kozlowski).
* tag 'scmi-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Simplify printks with pOF format
firmware: arm_scmi: imx: Discover MISC board info from the system manager
firmware: arm_scmi: imx: Support retrieving MISC protocol configuration info
firmware: arm_scmi: imx: Discover MISC build info from the system manager
firmware: arm_scmi: imx: Add documentation for MISC_BOARD_INFO
firmware: arm_scmi: quirk: Prevent writes to string constants
firmware: arm_scmi: Fix function name typo in scmi_perf_proto_ops struct
firmware: arm_scmi: Mark VirtIO ready before registering scmi_virtio_driver
firmware: arm_scmi: Constify struct scmi_transport_ops
firmware: arm_scmi: Constify struct scmi_voltage_proto_ops
dt-bindings: firmware: arm,scmi: Allow multiple instances
Link: https://lore.kernel.org/r/20250915101341.2987516-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The cdx_mcdi_init(), cdx_mcdi_process_cmd(), and cdx_mcdi_rpc() functions are
needed by the VersalNET EDAC module that interact with the MCDI (Management
Controller Direct Interface) framework. These functions facilitate
communication between different hardware components by enabling command
execution and status management.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/20250908115649.22903-1-shubhrajyoti.datta@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE protected DMA-bufs for v6.18
- Allocates protected DMA-bufs from a DMA-heap instantiated from the TEE
subsystem.
- The DMA-heap uses a protected memory pool provided by the backend TEE
driver, allowing it to choose how to allocate the protected physical
memory.
- Three use-cases (Secure Video Playback, Trusted UI, and Secure Video
Recording) have been identified so far to serve as examples of what
can be expected.
- The use-cases have predefined DMA-heap names,
"protected,secure-video", "protected,trusted-ui", and
"protected,secure-video-record". The backend driver registers protected
memory pools for the use-cases it supports.
* tag 'tee-prot-dma-buf-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
optee: smc abi: dynamic protected memory allocation
optee: FF-A: dynamic protected memory allocation
optee: support protected memory allocation
tee: add tee_shm_alloc_dma_mem()
tee: new ioctl to a register tee_shm from a dmabuf file descriptor
tee: refactor params_from_user()
tee: implement protected DMA-heap
dma-buf: dma-heap: export declared functions
optee: sync secure world ABI headers
Link: https://lore.kernel.org/r/20250912101752.GA1453408@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
generic_delete_inode() is rather misleading for what the routine is
doing. inode_just_drop() should be much clearer.
The new naming is inconsistent with generic_drop_inode(), so rename that
one as well with inode_ as the suffix.
No functional changes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.18
Allowlist the uefisec application, to provide UEFI variable access on
Dell Inspiron 7441 and Latitude 7455, the Hamoa EVK, and the Lenovo
Thinkbook 16.
Disable tzmem on the SC7180 platform, as this causes problems with
rmtfs.
Clean up unused, lingering, parameters in the MDT loader API.
Unconditinally clear TCS trigger bit, to avoid false completion IRQs in
the RPMh/RSC driver. Fix endianess issue in SMEM driver.
Add pd-mapper support for SM8750.
* tag 'qcom-drivers-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: tzmem: disable sc7180 platform
soc: qcom: use devm_kcalloc() for array space allocation
dt-bindings: firmware: qcom,scm: Add MSM8937
firmware: qcom: scm: Allow QSEECOM on Dell Inspiron 7441 / Latitude 7455
firmware: qcom: scm: Allow QSEECOM on Lenovo Thinkbook 16
soc: qcom: rpmh-rsc: Unconditionally clear _TRIGGER bit for TCS
soc: qcom: pd-mapper: Add SM8750 compatible
soc: qcom: icc-bwmon: Fix handling dev_pm_opp_find_bw_*() errors
soc: remove unneeded 'fast_io' parameter in regmap_config
soc: qcom: smem: Fix endian-unaware access of num_entries
dt-bindings: soc: qcom,rpmh-rsc: Remove double colon from description
dt-bindings: sram: qcom,imem: Document IPQ5424 compatible
firmware: qcom: scm: Allow QSEECOM on HAMOA-IOT-EVK
soc: qcom: mdt_loader: Remove unused parameter
soc: qcom: mdt_loader: Remove pas id parameter
soc: qcom: mdt_loader: Remove unused parameter
firmware: qcom: scm: preserve assign_mem() error return value
Link: https://lore.kernel.org/r/20250911215017.3020481-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Move bitfield.h from the CDX controller directory to include/linux/cdx to make
them accessible to other drivers.
As part of this refactoring, split mcdi.h into two headers:
- mcdi.h: retains interface-level declarations
- mcdid.h: contains internal definitions and macros
This is in preparation for VersalNET EDAC driver that relies on it.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/20250908115649.22903-1-shubhrajyoti.datta@amd.com
|
|
'20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-2-17f07a942b8d@oss.qualcomm.com' into drivers-for-6.18
Merge the addition of support for object invocation into the SCM driver
though a topic branch, to enable sharing this with TEE subsystem.
|
|
Qualcomm TEE (QTEE) hosts Trusted Applications (TAs) and services in
the secure world, accessed via objects. A QTEE client can invoke these
objects to request services. Similarly, QTEE can request services from
the nonsecure world using objects exported to the secure world.
Add low-level primitives to facilitate the invocation of objects hosted
in QTEE, as well as those hosted in the nonsecure world.
If support for object invocation is available, the qcom_scm allocates
a dedicated child platform device. The driver for this device communicates
with QTEE using low-level primitives.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-2-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Anyone with access to contiguous physical memory should be able to
share memory with QTEE using shm_bridge.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Reviewed-by: Kuldeep Singh <quic_kuldsing@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-1-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a flag to generate ABS_PRESSURE as sum of ABS_MT_PRESSURE across
all slots.
This flag should be set if one knows a device reports true force and would
like to report total force to the userspace.
Signed-off-by: Angela Czubak <aczubak@google.com>
Co-developed-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jonathan Denose <jdenose@google.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Introduce haptic usages as defined in HID Usage Tables specification.
Add HID units for newton and gram.
Signed-off-by: Angela Czubak <aczubak@google.com>
Co-developed-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This commit documents the implicit RCU readers that are implied by the
this_cpu_inc() and atomic_long_inc() operations in __srcu_read_lock_fast()
and __srcu_read_unlock_fast(). While in the area, fix the documentation
of the memory pairing of atomic_long_inc() in __srcu_read_lock_fast().
[ paulmck: Apply Joel Fernandes feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <bpf@vger.kernel.org>
|
|
Validate extensible ioctls stricter than we do now.
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The "mbm_event" counter assignment mode allows users to assign a hardware
counter to an RMID, event pair and monitor the bandwidth as long as it is
assigned.
Introduce a user-configurable option that determines if a counter will
automatically be assigned to an RMID, event pair when its associated
monitor group is created via mkdir. Accessible when "mbm_event" counter
assignment mode is enabled.
Suggested-by: Peter Newman <peternewman@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
The "mbm_event" counter assignment mode allows the user to assign a hardware
counter to an RMID, event pair and monitor the bandwidth as long as it is
assigned. The user can specify the memory transaction(s) for the counter to
track.
When this mode is supported, the /sys/fs/resctrl/info/L3_MON/event_configs
directory contains a sub-directory for each MBM event that can be assigned to
a counter. The MBM event sub-directory contains a file named "event_filter"
that is used to view and modify which memory transactions the MBM event is
configured with.
Create /sys/fs/resctrl/info/L3_MON/event_configs directory on resctrl mount
and pre-populate it with directories for the two existing MBM events:
mbm_total_bytes and mbm_local_bytes. Create the "event_filter" file within
each MBM event directory with the needed *show() that displays the memory
transactions with which the MBM event is configured.
Example:
$ mount -t resctrl resctrl /sys/fs/resctrl
$ cd /sys/fs/resctrl/
$ cat info/L3_MON/event_configs/mbm_total_bytes/event_filter
local_reads,remote_reads,local_non_temporal_writes,
remote_non_temporal_writes,local_reads_slow_memory,
remote_reads_slow_memory,dirty_victim_writes_all
$ cat info/L3_MON/event_configs/mbm_local_bytes/event_filter
local_reads,local_non_temporal_writes,local_reads_slow_memory
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
When supported, "mbm_event" counter assignment mode allows users to assign
a hardware counter to an RMID, event pair and monitor the bandwidth usage as
long as it is assigned. The hardware continues to track the assigned counter
until it is explicitly unassigned by the user.
Introduce the architecture calls resctrl_arch_cntr_read() and
resctrl_arch_reset_cntr() to read and reset event counters when "mbm_event"
mode is supported. Function names match existing resctrl_arch_rmid_read() and
resctrl_arch_reset_rmid().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
with ABMC
The ABMC feature allows users to assign a hardware counter to an RMID,
event pair and monitor bandwidth usage as long as it is assigned. The
hardware continues to track the assigned counter until it is explicitly
unassigned by the user.
Implement an x86 architecture-specific handler to configure a counter. This
architecture specific handler is called by resctrl fs when a counter is
assigned or unassigned as well as when an already assigned counter's
configuration should be updated. Configure counters by writing to the
L3_QOS_ABMC_CFG MSR, specifying the counter ID, bandwidth source (RMID),
and event configuration.
The ABMC feature details are documented in APM [1] available from [2].
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3.3 Assignable Bandwidth
Monitoring (ABMC).
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
|
|
When supported, mbm_event counter assignment mode allows the user to configure
events to track specific types of memory transactions.
Introduce an evt_cfg field in struct mon_evt to define the type of memory
transactions tracked by a monitoring event. Also add a helper function to get
the evt_cfg value.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
The "mbm_event" counter assignment mode allows users to assign a hardware
counter to an RMID, event pair and monitor bandwidth usage as long as it is
assigned. The hardware continues to track the assigned counter until it is
explicitly unassigned by the user. Counters are assigned/unassigned at
monitoring domain level.
Manage a monitoring domain's hardware counters using a per monitoring
domain array of struct mbm_cntr_cfg that is indexed by the hardware
counter ID. A hardware counter's configuration contains the MBM event
ID and points to the monitoring group that it is assigned to, with a NULL
pointer meaning that the hardware counter is available for assignment.
There is no direct way to determine which hardware counters are assigned
to a particular monitoring group. Check every entry of every hardware
counter configuration array in every monitoring domain to query which
MBM events of a monitoring group is tracked by hardware. Such queries are
acceptable because of a very small number of assignable counters (32
to 64).
Suggested-by: Peter Newman <peternewman@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
Add the functionality to enable/disable the AMD ABMC feature.
The AMD ABMC feature is enabled by setting enabled bit(0) in the
L3_QOS_EXT_CFG MSR. When the state of ABMC is changed, the MSR needs to be
updated on all the logical processors in the QOS Domain.
Hardware counters will reset when ABMC state is changed.
[ bp: Massage commit message. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
|
|
ABMC feature details are reported via CPUID Fn8000_0020_EBX_x5.
Bits Description
15:0 MAX_ABMC Maximum Supported Assignable Bandwidth
Monitoring Counter ID + 1
The ABMC feature details are documented in APM [1] available from [2].
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3.3 Assignable Bandwidth
Monitoring (ABMC).
Detect the feature and number of assignable counters supported. For backward
compatibility, upon detecting the assignable counter feature, enable the
mbm_total_bytes and mbm_local_bytes events that users are familiar with as
part of original L3 MBM support.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
|
|
The cache allocation and memory bandwidth allocation feature properties are
consolidated into struct resctrl_cache and struct resctrl_membw respectively.
In preparation for more monitoring properties that will clobber the existing
resource struct more, re-organize the monitoring specific properties to also
be in a separate structure.
Also convert "bandwidth sources" terminology to "memory transactions" to have
consistency within resctrl for related monitoring features.
[ bp: Massage commit message. ]
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
|
|
|
