| Age | Commit message (Collapse) | Author |
|---|
|
Merge tag 'mtd/spi-mem-cont-read-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into spi-7.2
Miquel Raynal <miquel.raynal@bootlin.com> says:
Aside from preparation changes in the SPI NAND core, the changes carried
here focus on the shared spi-mem layer which is enhanced in order to
bring two new features:
- The possibility to fill a primary and a secondary operation template
in the direct mapping structure in order to support continuous reads
in SPI NAND, which may require two different read operations.
- SPI controllers may indicate possible CS instabilities over long
transfers by setting a boolean. This capability is related to the
previous one, the need for it has arised while testing SPI NAND
continuous reads with the Cadence QSPI controller which cannot, under
certain conditions, keep the CS asserted for the length of
an eraseblock-large transfer.
|
|
'rockchip', 'verisilicon', 'riscv', 'intel/vt-d', 'amd/amd-vi' and 'core' into next
|
|
A comment in <linux/sysfb.h> incorrectly refers to CONFIG_SYSFB_SIMPLE
instead of CONFIG_SYSFB_SIMPLEFB. Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260610195248.19442-1-enelsonmoore@gmail.com
|
|
Merge series "slab: support for compiler-assisted type-based slab cache
partitioning" from Marco Elver. From the cover letter [6]:
Rework the general infrastructure around RANDOM_KMALLOC_CACHES into more
flexible KMALLOC_PARTITION_CACHES, with the former being a partitioning
mode of the latter.
Introduce a new mode, KMALLOC_PARTITION_TYPED, which leverages a feature
available in Clang 22 and later, called "allocation tokens" via
__builtin_infer_alloc_token() [1]. Unlike KMALLOC_PARTITION_RANDOM
(formerly RANDOM_KMALLOC_CACHES), this mode deterministically assigns a
slab cache to an allocation of type T, regardless of allocation site.
The builtin __builtin_infer_alloc_token(<malloc-args>, ...) instructs
the compiler to infer an allocation type from arguments commonly passed
to memory-allocating functions and returns a type-derived token ID. The
implementation passes kmalloc-args to the builtin: the compiler performs
best-effort type inference, and then recognizes common patterns such as
`kmalloc(sizeof(T), ...)`, `kmalloc(sizeof(T) * n, ...)`, but also
`(T *)kmalloc(...)`. Where the compiler fails to infer a type the
fallback token (default: 0) is chosen.
Note: kmalloc_obj(..) APIs fix the pattern how size and result type are
expressed, and therefore ensures there's not much drift in which
patterns the compiler needs to recognize. Specifically, kmalloc_obj()
and friends expand to `(TYPE *)KMALLOC(__obj_size, GFP)`, which the
compiler recognizes via the cast to TYPE*.
Clang's default token ID calculation is described as [1]:
typehashpointersplit: This mode assigns a token ID based on the hash
of the allocated type's name, where the top half ID-space is reserved
for types that contain pointers and the bottom half for types that do
not contain pointers.
Separating pointer-containing objects from pointerless objects and data
allocations can help mitigate certain classes of memory corruption
exploits [2]: attackers who gains a buffer overflow on a primitive
buffer cannot use it to directly corrupt pointers or other critical
metadata in an object residing in a different, isolated heap region.
It is important to note that heap isolation strategies offer a
best-effort approach, and do not provide a 100% security guarantee,
albeit achievable at relatively low performance cost. Note that this
also does not prevent cross-cache attacks: while waiting for future
features like SLAB_VIRTUAL [3] to provide physical page isolation, this
feature should be deployed alongside SHUFFLE_PAGE_ALLOCATOR and
init_on_free=1 to mitigate cross-cache attacks and page-reuse attacks as
much as possible today.
With all that, my kernel (x86 defconfig) shows me a histogram of slab
cache object distribution per /proc/slabinfo (after boot):
<slab cache> <objs> <hist>
kmalloc-part-15 1465 ++++++++++++++
kmalloc-part-14 2988 +++++++++++++++++++++++++++++
kmalloc-part-13 1656 ++++++++++++++++
kmalloc-part-12 1045 ++++++++++
kmalloc-part-11 1697 ++++++++++++++++
kmalloc-part-10 1489 ++++++++++++++
kmalloc-part-09 965 +++++++++
kmalloc-part-08 710 +++++++
kmalloc-part-07 100 +
kmalloc-part-06 217 ++
kmalloc-part-05 105 +
kmalloc-part-04 4047 ++++++++++++++++++++++++++++++++++++++++
kmalloc-part-03 183 +
kmalloc-part-02 283 ++
kmalloc-part-01 316 +++
kmalloc 1422 ++++++++++++++
The above /proc/slabinfo snapshot shows me there are 6673 allocated
objects (slabs 00 - 07) that the compiler claims contain no pointers or
it was unable to infer the type of, and 12015 objects that contain
pointers (slabs 08 - 15). On a whole, this looks relatively sane.
Additionally, when I compile my kernel with -Rpass=alloc-token, which
provides diagnostics where (after dead-code elimination) type inference
failed, I see 186 allocation sites where the compiler failed to identify
a type (down from 966 when I sent the RFC [4]). Some initial review
confirms these are mostly variable sized buffers, but also include
structs with trailing flexible length arrays.
Link: https://clang.llvm.org/docs/AllocToken.html [1]
Link: https://blog.dfsec.com/ios/2025/05/30/blasting-past-ios-18/ [2]
Link: https://lwn.net/Articles/944647/ [3]
Link: https://lore.kernel.org/all/20250825154505.1558444-1-elver@google.com/ [4]
Link: https://discourse.llvm.org/t/rfc-a-framework-for-allocator-partitioning-hints/87434 [5]
Link: https://lore.kernel.org/all/20260511200136.3201646-1-elver@google.com/ [6]
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v7.2 merge window
This includes following USB4/Thunderbolt changes for the v7.2 merge
window:
- Make the driver more compliant with the connection manager guide.
- Improvements over Thunderbolt XDomain service handling.
- USB4STREAM driver.
- Split out PCIe bits into pci.c to allow the driver to work on
non-PCIe hosts as well.
- Various fixes and improvements.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (41 commits)
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
thunderbolt: test: Release third DP tunnel
thunderbolt: Prevent XDomain delayed work use-after-free on disconnect
thunderbolt: test: Add KUnit tests for property parser bounds checks
thunderbolt: Add some more descriptive probe error messages
thunderbolt: Require nhi->ops be valid
thunderbolt: Separate out common NHI bits
thunderbolt: Move pci_device out of tb_nhi
thunderbolt: Increase Notification Timeout to 255 ms for USB4 routers
thunderbolt: Increase timeout for Configuration Ready bit
thunderbolt: Verify Router Ready bit is set after router enumeration
thunderbolt: Verify PCIe adapter in detect state before tunnel setup
thunderbolt: Activate path hops from source to destination
thunderbolt: Fix lane bonding log when bonding not possible
thunderbolt: Don't access path config space on Lane 1 adapters in tb_switch_reset_host()
thunderbolt: Improve multi-display DisplayPort tunnel allocation
docs: admin-guide: thunderbolt: Add instructions how to use USB4STREAM
thunderbolt: Add support for USB4STREAM
thunderbolt: Add support for ConfigFS
...
|
|
KVM SEV changes for 7.2
- Don't advertise support for unusuable VM types, and account for VM types
that are disabled by firmware, e.g. to mitigate security vulnerabilities.
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with bugs and
unnecessarily complicated, and add comprehensive tests.
- Clean up and deduplicate the SEV page pinning code.
- Fix minor goofs related to writing back CPUID information after firmware
rejects a CPUID page for an SNP vCPU.
|
|
KVM generic changes for 7.2
- Rename invalidate_begin() to invalidate_start() throughout KVM to follow
the kernel's nomenclature, e.g. for mmu_notifiers.
- Minor cleanups.
|
|
mr_table.cache_resolve_queue_len is always updated under
spin_lock_bh(&mfc_unres_lock).
Let's convert it to u32.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609222013.1550355-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e85 ("net: txgbe: rework service event handling")
57d39faed4c9 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b73 ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2a6 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b727 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d5e ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge cpufreq updates for 7.2:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that affect
cpufreq governors using the common governor code (Zhongqiu Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the PCC
cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors printed
by the intel_pstate driver and sync policy->cur during CPU offline in
it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur,
Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
* pm-cpufreq: (25 commits)
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
cpufreq: clean up dead dependencies on X86 in Kconfig
cpufreq: conservative: Simplify frequency limit handling
cpufreq: Avoid redundant target() calls for unchanged limits
cpufreq: Fix typo in comment
cpufreq: intel_pstate: Sync policy->cur during CPU offline
cpufreq: Documentation: fix sampling_down_factor range
cpufreq: Fix hotplug-suspend race during reboot
cpufreq: pcc: fix use-after-free and double free in _OSC evaluation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec and netfilter.
This is relatively small, mostly because we are a bit behind our PW
queue. I'm not aware of any pending regression.
Current release - regressions:
- netfilter: nf_tables_offload: drop device refcount on error
Previous releases - regressions:
- core: add pskb_may_pull() to skb_gro_receive_list()
- xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
- ipv6: fix a potential NPD in cleanup_prefix_route()
- ipv4: fix use-after-free caused by the fqdir_pre_exit() flush
- eth:
- bnxt_en: fix NULL pointer dereference
- emac: fix use-after-free during device removal
- octeontx2-af: fix memory leak in rvu_setup_hw_resources()
- tun: zero the whole vnet header in tun_put_user()
- sit: reload inner IPv6 header after GSO offloads
Previous releases - always broken:
- core: fix double-free in netdev_nl_bind_rx_doit()
- netfilter: nf_log: validate MAC header was set before dumping it
- xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
- tcp: restrict SO_ATTACH_FILTER to priv users
- mctp: usb: fix race between urb completion and rx_retry
cancellation
- eth:
- mlx5: fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
- mvpp2: sync RX data at the hardware packet offset"
* tag 'net-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
octeontx2-af: fix IP fragment flag corruption on custom KPU profile load
ipv6: Fix a potential NPD in cleanup_prefix_route()
net: txgbe: initialize PHY interface to 0
net: txgbe: distinguish module types by checking identifier
net: txgbe: initialize module info buffer
net: mvpp2: build skb from XDP-adjusted data on XDP_PASS
net: mvpp2: refill RX buffers before XDP or skb use
net: mvpp2: limit XDP frame size to the RX buffer
net: mvpp2: sync RX data at the hardware packet offset
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
netfilter: nf_log: validate MAC header was set before dumping it
netfilter: x_tables: avoid leaking percpu counter pointers
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
netfilter: nf_tables_offload: drop device refcount on error
netfilter: revalidate bridge ports
rds: mark snapshot pages dirty in rds_info_getsockopt()
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
ptp: ocp: fix resource freeing order
...
|
|
|
|
The ASUS Keystone is a physical NFC-like dongle that slots into supported
ASUS laptops. The EC fires WMI notify code 0xB4 on insert/remove events.
Expose the current insert state via a sysfs attribute by querying WMI
device ID 0x00120091 (DSTS). This devid does not follow the standard DSTS
convention: PRESENCE_BIT (0x00010000) encodes the insert state rather than
feature presence, and STATUS_BIT is never set. Presence of a keystone slot
is detected by a successful DSTS call.
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Dariusz Figzał <dariuszfigzal@gmail.com>
Link: https://patch.msgid.link/20260610164942.74956-1-dariuszfigzal@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Move the percpu_up_read() slowpath out of the inline function into a new
__percpu_up_read() to avoid binary size increase from adding a
tracepoint to an inlined function.
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Usama Arif <usama.arif@linux.dev>
Link: https://patch.msgid.link/3dd2a1b9ab4f469e1892766cb63f41d6b0f53d29.1780506267.git.d@ilvokhin.com
|
|
Rate limiting is currently supported only for raw packet QPs, where
the packet pacing index is programmed into the SQC during SQ modify.
Extend rate limit support to UD and UC QPs by setting the pacing
index in the QPC during RTR2RTS and RTS2RTS transitions.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-3-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add the needed capabilities in mlx5_ifc to support packet pacing for UC
and UD QPs.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-1-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
DB8540 support was removed in commit b6d09f780761 ("pinctrl: nomadik:
Drop U8540/9540 support"), but a couple small pieces of related code
remained in <gpio/gpio-nomadik.h>. Remove them.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260610205007.44881-1-enelsonmoore@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Quite a few last updates, notably:
- b43: new support for an 11n device
- mt76:
- mt792x broken usb transport detection
- mt7921 regd improvements
- mt7927 support
- iwlwifi:
- more kunit tests
- FW version updates
- ath12k: WDS support
- rtw89:
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations
- cfg80211/mac80211:
- update UHR to D1.4, UHR DBE support
- finally remove 5/10 MHz support
- S1G rate reporting
- multicast encapsulation offload
* tag 'wireless-next-2026-06-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (285 commits)
b43: add RF power offset for N-PHY r8 + radio 2057 r8
b43: add channel info table for N-PHY r8 + radio 2057 r8
b43: add IPA TX gain table for N-PHY r8 + radio 2057 r8
b43: support radio 2057 rev 8
b43: route d11 corerev 22 to 24-bit indirect radio access
b43: add d11 core revision 0x16 to id table
b43: add firmware mappings for rev22
rfkill: Replace strcpy() with memcpy()
wifi: brcmfmac: flowring: simplify flow allocation
wifi: brcm80211: change current_bss to value
wifi: ath12k: enable IEEE80211_VHT_EXT_NSS_BW_CAPABLE when NSS ratio is reported
wifi: ath12k: fix EAPOL TX failure caused by stale tcl_metadata bits
wifi: ath: Update copyright in testmode_i.h
wifi: ath10k: Update Qualcomm copyrights
wifi: ath11k: Update Qualcomm copyrights
wifi: ath12k: Update Qualcomm copyrights
wifi: mt76: Drop unneeded mt76_register_debugfs_fops() return checks
wifi: mt76: mt7921: assert sniffer on chanctx change
wifi: mt76: mt7996: fix potential tx_retries underflow
wifi: mt76: mt7925: fix potential tx_retries underflow
...
====================
Link: https://patch.msgid.link/20260610103637.179340-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When jbd2 was originally written, kmalloc() would not guarantee memory
alignment for the requested objects. Since commit 59bb47985c1d in 2019,
kmalloc has guaranteed natural alignment for power-of-two allocations.
We can now remove the jbd2 special slabs and just use kmalloc() directly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Tal Zussman <tz2294@columbia.edu>
Link: https://patch.msgid.link/20260528171413.1088143-1-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fanotify used to refuse to report pidfds for reaped tasks by applying a
pid_has_task() check before calling pidfd_prepare(). This prevented
userspace from obtaining information about the task.
Register the event pid with pidfs when creating the fanotify event if
pidfd reporting was requested, so pidfd_prepare() can later create a
pidfd for the reaped task.
Suggested-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/linux-fsdevel/20260528-schmuckvoll-heilen-garen-be77b4208671@brauner/
Signed-off-by: AnonymeMeow <anonymemeow@gmail.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Link: https://patch.msgid.link/20260607003343.425939-3-anonymemeow@gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Commit bee8c7c24b73 ("virtio: introduce map ops in virtio core") and
commit b16060c5c7d5 ("virtio: introduce virtio_map container union")
added 'map' and 'vmap' members to struct virtio_device but did not
update the kernel-doc comment block. This caused 'make htmldocs' to
emit warnings:
./include/linux/virtio.h:188 struct member 'map' not described in 'virtio_device'
./include/linux/virtio.h:188 struct member 'vmap' not described in 'virtio_device'
Add the missing entries in struct-declaration order to match the
existing convention in the file. After this patch, 'make htmldocs'
no longer emits these warnings.
Fixes: bee8c7c24b73 ("virtio: introduce map ops in virtio core")
Fixes: b16060c5c7d5 ("virtio: introduce virtio_map container union")
Reported-by: Luis Felipe Hernandez <luis.hernandez093@gmail.com>
Signed-off-by: Christian Fontanez <christfontanez@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260519013321.32511-1-christfontanez@gmail.com>
|
|
Map update and delete paths currently call bpf_obj_free_fields() when a
value is being replaced or recycled. That makes field destruction depend
on the context of the update/delete operation. For tracing programs this
can include NMI context, where referenced kptr destructors, uptr
unpinning, and graph root destruction are not generally safe.
Introduce bpf_obj_cancel_fields() for the reusable-value path. It only
performs NMI-safe cleanup for timer, workqueue, and task_work fields.
Fields that need full destruction are left attached to the recycled value
and are destroyed by the final cleanup path instead.
Switch array and hashtab update/delete/recycle paths to this cancel
helper. Keep bpf_obj_free_fields() for final map destruction and for
bpf_mem_alloc destructors. Preallocated hashtabs do not have allocator
destructors, so teardown continues to walk the normal and extra elements
and fully destroy their fields.
This deliberately relaxes the eager-free semantics of map update/delete
for special fields. Programs that relied on a recycled map slot becoming
empty immediately after update/delete were relying on behavior that
cannot be implemented safely from every BPF execution context without
offloading arbitrary destructors.
There is a chance this change breaks programs making assumptions
regarding the eager freeing of fields. If so, we can relax semantics to
cancellation only when irqs_disabled() is true in the future. However,
theoretically, map values that get reused eagerly already have weaker
guarantees as parallel users can recreate freed fields before the new
element becomes visible again.
Fixes: 14a324f6a67e ("bpf: Wire up freeing of referenced kptr")
Signed-off-by: Justin Suess <utilityemal77@gmail.com>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260609202548.3571690-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_obj_drop() runs bpf_obj_free_fields() synchronously for
program-allocated objects. When such an object contains NMI unsafe
fields, tracing programs that can run from arbitrary instrumented
context can reach that destruction from unsafe contexts, including NMI.
NMI is likely one instance of this problem, and other instances would
include possible unsafe reentrancy. Deferring bpf_obj_drop() is not
appealing either: it would add delayed-free machinery to a release
operation that otherwise has straightforward synchronous ownership
semantics.
Reject bpf_obj_drop() and bpf_percpu_obj_drop() from tracing programs
that may run from unsafe contexts unless every field in the object's BTF
record is explicitly NMI safe. Do not reject sleepable
BPF_PROG_TYPE_TRACING programs, since they are not the arbitrary/NMI
contexts that motivate the restriction.
Note that while bpf_rb_root and bpf_list_head would be NMI safe on their
own to free, the objects recursively held by them may not be; be
conservative and just mark them as not NMI safe for now.
Use a whitelist for the NMI-safe field set instead of listing only known
NMI unsafe fields. Locks, async fields, unreferenced kptrs, and
refcounts are known to be NMI safe because their destruction is either a
no-op, simple state reset, or async cancellation. Referenced kptrs,
percpu referenced kptrs, uptrs, graph roots, graph nodes, and any future
field type are rejected until audited for arbitrary tracing and NMI
contexts. This is less susceptible to future changes in fields that were
previously safe by exclusion, and to new fields being added without
updating this check.
Convert the existing recursive local-object drop success case to a
syscall program in the same commit, since this verifier change makes the
old tracing program form invalid. The test still exercises
bpf_obj_drop() releasing a referenced task kptr from a safe program
type.
Fixes: ac9f06050a35 ("bpf: Introduce bpf_obj_drop")
Signed-off-by: Justin Suess <utilityemal77@gmail.com>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260609202548.3571690-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When ndo_set_rx_mode_async returns an error, schedule a retry with
exponential backoff (1s, 2s, 4s, 8s -- 15s total). Give up after the
4th retry and log an error via netdev_err().
This moves retry logic from individual drivers into the core stack.
Timer callback does not hold a ref on dev. Safe because the timer can
only be armed when dev is IFF_UP, and __dev_close_many runs
timer_delete_sync before clearing IFF_UP. Unregister always closes
IFF_UP devices first, so by the time dev can be freed the timer is
dead and cannot be re-armed.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260608154014.227538-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change the return type of ndo_set_rx_mode_async from void to int to
allow drivers to report failures back to the core stack. This is a
prerequisite for adding retry logic in the core when drivers fail to
program RX filters (e.g. bnxt VF when PF is unavailable).
All existing implementations return 0 for now, maintaining current
behavior.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260608154014.227538-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When dynamically creating software nodes and properties for subsequent
use with software_node_register() current implementation of
PROPERTY_ENTRY_REF() is not suitable because it creates a temporary
instance of struct software_node_ref_args on stack which will later
disappear, and software_node_register() only does shallow copy of
properties.
Fix this by allowing to pass address of reference arguments structure
directly into PROPERTY_ENTRY_REF(), so that caller can manage lifetime
of the object properly.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/aiTo4dvKu8pyimHA@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The first device on a PCI root bus determines whether the host bridge is
whitelisted for P2PDMA. All Intel Xeon chips since Ice Lake (ICX, 2021)
expose a device with ID 0x09a2 as first device. It is loosely associated
with the IOMMU. All these Xeon chips support P2PDMA, so since the addition
of the device with commit feaea1fe8b36 ("PCI/P2PDMA: Add Intel 3rd Gen
Intel Xeon Scalable Processors to whitelist"), P2PDMA has been allowed on
all new Xeons without the need to amend the whitelist:
Xeons with Performance Cores:
Sapphire Rapids (SPR, 2023)
Emerald Rapids (EMR, 2023)
Granite Rapids (GNR, 2024)
Diamond Rapids (DMR, 2026)
Xeons with Efficiency Cores:
Sierra Forest (SRF, 2024)
Clearwater Forest (CWF, 2026)
However these Xeons also expose accelerators as first device on a root bus
of its own:
QuickAssist Technology (QAT, crypto & compression accelerator)
Data Streaming Accelerator (DSA, dma engine)
In-Memory Analytics Accelerator (IAA, compression accelerator)
Whitelist them for P2PDMA as well. Move their Device ID macros from the
accelerator drivers to <linux/pci_ids.h> for reuse by P2PDMA code.
Unfortunately the Device IDs vary across Xeon generations as additional
features were added to the accelerators. This currently necessitates an
amendment for each new Xeon chip.
For future chips, this need shall be avoided by an ongoing effort to extend
ACPI HMAT with PCIe P2PDMA characteristics (latency, bandwidth, ordering
constraints). The PCI core will be able look up in this BIOS-provided ACPI
table whether P2PDMA is supported, instead of relying on a whitelist that
needs to be amended continuously.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # QAT
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/6aac4922b5fe7070b11874427a9285e42ddd05a4.1780585518.git.lukas@wunner.de
|
|
Some hardware monitoring chips support update intervals below one
millisecond. The existing update_interval attribute uses millisecond
granularity, which causes sub-millisecond steps to round to the same
value and become inaccessible from userspace.
Introduce update_interval_us, a companion chip-level attribute that
expresses the same update interval in microseconds. Drivers
implementing this attribute should also implement update_interval for
compatibility with millisecond-based userspace interfaces.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-2-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or
sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state
across transport teardown, pinning svc_xprt references and
blocking svc_rdma_free().
The close path sets XPT_CLOSE before invoking xpo_detach and both
wait_event predicates include an XPT_CLOSE term, but the
predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has
no completion-driven wake path; it is advanced solely by the
chained ticket handoff inside svc_rdma_sq_wait() itself. Without
an explicit wake at close, parked threads never observe
XPT_CLOSE, hold their svc_xprt_get reference forever, and
svc_rdma_free() blocks on xpt_ref dropping to zero.
Two close entry points reach this transport. Local teardown runs
svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() ->
xpo_detach() on a worker thread. A remote disconnect arrives at
svc_rdma_cma_handler(), which calls svc_xprt_deferred_close():
that sets XPT_CLOSE and enqueues the transport but does not
access either RDMA waitqueue, so a worker already parked in
svc_rdma_sq_wait() never re-evaluates its predicate. With every
worker parked on this transport, no thread is available to run
the local teardown either, and the wake site there is
unreachable.
Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper
that calls svc_xprt_deferred_close() and then wakes both
sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers
that called svc_xprt_deferred_close() directly:
svc_rdma_cma_handler(), qp_event_handler(),
svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop
path, the rw completion error paths, and the recvfrom flush and
read-list error paths.
Wake both waitqueues from svc_rdma_detach() as well. The
synchronous svc_xprt_close() path (backchannel ENOTCONN, device
removal via svc_rdma_xprt_done) reaches detach without flowing
through svc_xprt_deferred_close() and therefore does not invoke
the new helper.
Fixes: ccc89b9d1ed2 ("svcrdma: Add fair queuing for Send Queue access")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
[ cel: add svc_rdma_xprt_deferred_close() to complete the fix ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
xdr_buf_to_bvec() returns a slot count even when the caller's bvec
budget is exhausted partway through the xdr_buf. Callers feed that
count into iov_iter_bvec() and continue as if the conversion had
succeeded, silently sending or writing fewer bytes than the data
length declares. For an NFS WRITE the server reports the truncated
transfer to the client as full success.
The overflow represents an internal invariant violation: a higher
layer reserved a bvec budget too small for the xdr_buf it then
asked the encoder to convert. That is a server-side fault, not a
media I/O failure and not a malformed client argument.
Change xdr_buf_to_bvec() to return a signed int and have the
overflow label return -ESERVERFAULT. Update the three callers to
detect the negative return and fail the request: nfsd_vfs_write()
folds the error into host_err, which nfserrno() translates to
nfserr_serverfault for the WRITE reply; svc_udp_sendto() and
svc_tcp_sendmsg() propagate the error out of the send path.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 2eb2b9358181 ("SUNRPC: Convert svc_tcp_sendmsg to use bio_vecs directly")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In order to generate source code to encode and decode NLMv3 protocol
elements, include a copy of the RPC language description of NLMv3
for xdrgen to process. The language description is derived from the
Open Group's XNFS specification:
https://pubs.opengroup.org/onlinepubs/9629799/chap10.htm#tagcjh_11_03
The C code committed here was generated from the new nlm3.x file
using tools/net/sunrpc/xdrgen/xdrgen.
The goals of replacing hand-written XDR functions with ones that
are tool-generated are to improve memory safety and make XDR
encoding and decoding less brittle to maintain. Parts of the
NFSv4 protocol are still being extended actively. Tool-generated
XDR code reduces the time it takes to get a working implementation
of new protocol elements.
The xdrgen utility derives both the type definitions and the
encode/decode functions directly from protocol specifications,
using names and symbols familiar to anyone who knows those specs.
Unlike hand-written code that can inadvertently diverge from the
specification, xdrgen guarantees that the generated code matches
the specification exactly.
We would eventually like xdrgen to generate Rust code as well,
making the conversion of the kernel's NFS stacks to use Rust just
a little easier for us.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Send completion currently queues a work item to an unbound
workqueue for each completed send context. Under load, the
Send Completion handlers contend for the shared workqueue
pool lock.
Replace the workqueue with a per-transport lock-free list
(llist). The Send completion handler appends the send_ctxt
to sc_send_release_list and does no further teardown. The
nfsd thread drains the list in xpo_release_ctxt between
RPCs, performing DMA unmapping, chunk I/O resource release,
and page release in a batch.
This eliminates both the workqueue pool lock and the DMA
unmap cost from the Send completion path. DMA unmapping can
be expensive when an IOMMU is present in strict mode, as
each unmap triggers a synchronous hardware IOTLB
invalidation. Moving it to the nfsd thread, where that
latency is harmless, avoids penalizing completion handler
throughput.
The nfsd threads absorb the release cost at a point where
the client is no longer waiting on a reply, and natural
batching amortizes the overhead when completions arrive
faster than RPCs complete.
A self-enqueue backstops drain on a quiescing transport.
When svc_rdma_send_ctxt_put() observes that its llist_add()
transitions sc_send_release_list from empty to non-empty,
it sets XPT_DATA and calls svc_xprt_enqueue() so that
svc_xprt_ready() schedules an nfsd thread. The thread
enters svc_rdma_recvfrom(), finds no pending receive,
clears XPT_DATA, and returns 0; svc_xprt_release() then
runs xpo_release_ctxt and drains the list. Under steady
load the foreground drain keeps the list non-empty between
adds and no enqueue fires; only the trailing edge of a
burst pays for a wakeup. Without this path, a Send
completion arriving after the last xpo_release_ctxt on an
idle connection would leave the send_ctxt's DMA mappings
and reply pages pinned until the next RPC, send-context
exhaustion, or transport close.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Each RDMA Send completion triggers a cascade of work items on the
svcrdma_wq unbound workqueue:
ib_cq_poll_work (on ib_comp_wq, per-CPU)
-> svc_rdma_send_ctxt_put -> queue_work [work item 1]
-> svc_rdma_write_info_free -> queue_work [work item 2]
Every transition through queue_work contends on the unbound
pool's spinlock. Profiling an 8KB NFSv3 read/write workload
over RDMA shows about 4% of total CPU cycles spent on this
lock, with the cascading re-queue of write_info release
contributing roughly 1%.
The initial queue_work in svc_rdma_send_ctxt_put is needed to
move release work off the CQ completion context (which runs on
a per-CPU bound workqueue). However, once executing on
svcrdma_wq, there is no need to re-queue for each write_info
structure. svc_rdma_reply_chunk_release already calls
svc_rdma_cc_release inline from the same svcrdma_wq context,
and svc_rdma_recv_ctxt_put does the same from nfsd thread
context.
Release write chunk resources inline in
svc_rdma_write_info_free, removing the intermediate
svc_rdma_write_info_free_async work item and the wi_work
field from struct svc_rdma_write_info.
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Tested-by: Jonathan Flynn <jonathan.flynn@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The migration to crypto/krb5 eliminated the per-enctype
function dispatch and direct crypto API usage, leaving
behind a number of orphaned definitions.
Remove the following from gss_krb5.h:
- GSS_KRB5_K5CLENGTH, used only by removed key derivation
- KG_TOK_MIC_MSG and KG_TOK_WRAP_MSG (Kerberos v1 token
types; v1 support was dropped earlier)
- KG2_TOK_INITIAL and KG2_TOK_RESPONSE (context
establishment token types; no remaining users)
- KG2_RESP_FLAG_ERROR and KG2_RESP_FLAG_DELEG_OK
- enum sgn_alg and enum seal_alg (v1 algorithm constants)
- All CKSUMTYPE_* definitions, now duplicated by
KRB5_CKSUMTYPE_* in <crypto/krb5.h>
- The KG_ error constants from gssapi_err_krb5.h, which
have no remaining users
- The ENCTYPE_* constant block, replaced by KRB5_ENCTYPE_*
from <crypto/krb5.h>
- KG_USAGE_SEAL/SIGN/SEQ (3DES usage constants)
- KEY_USAGE_SEED_CHECKSUM/ENCRYPTION/INTEGRITY, duplicated
by <crypto/krb5.h>
- #include <crypto/skcipher.h>, no longer needed
Remove the cksum[] field from struct krb5_ctx in
gss_krb5_internal.h; no code reads or writes it after the
key derivation removal.
Switch gss_krb5_enctypes[] in gss_krb5_mech.c to the
canonical KRB5_ENCTYPE_* names from <crypto/krb5.h>.
Remove stale #include directives:
- <crypto/skcipher.h> from gss_krb5_wrap.c
- <linux/random.h> and <linux/crypto.h> from
gss_krb5_seal.c
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
With all per-message crypto operations routed through crypto/krb5,
a substantial body of code in rpcsec_gss_krb5 has no remaining
callers. The internal key derivation functions (krb5_derive_key_v2,
krb5_kdf_hmac_sha2, krb5_kdf_feedback_cmac) and the low-level
crypto primitives (krb5_encrypt, gss_krb5_checksum, krb5_cbc_cts_
encrypt/decrypt, krb5_etm_checksum) are unreachable because their
only call sites were the per-enctype function pointers removed in
previous patches. Delete gss_krb5_keys.c entirely and strip the
dead functions from gss_krb5_crypto.c.
The KUnit test suite in gss_krb5_test.c exercised exactly these
internal functions: RFC 3961 n-fold, RFC 3962 key derivation,
RFC 6803 Camellia key derivation, and RFC 8009 AES-SHA2 key
derivation, plus encryption self-tests that drove the now-removed
encrypt routines. The corresponding test coverage is provided by
the crypto/krb5 selftests in crypto/krb5/selftest.c. Remove the
test file, the RPCSEC_GSS_KRB5_KUNIT_TEST Kconfig symbol, the
.kunitconfig, and all VISIBLE_IF_KUNIT / EXPORT_SYMBOL_IF_KUNIT
annotations.
xdr_process_buf() walked xdr_buf segments through a per-segment
callback and existed solely for the crypto routines in
gss_krb5_crypto.c. With that file removed, xdr_process_buf()
has no remaining callers. Its successor, xdr_buf_to_sg(),
populates a scatterlist directly from an xdr_buf byte range
and was introduced earlier in this series.
With every consumer of struct gss_krb5_enctype removed, replace
its remaining uses with the equivalent fields from struct
krb5_enctype (key_len). Remove struct gss_krb5_enctype, the
supported_gss_krb5_enctypes[] table, gss_krb5_lookup_enctype(),
and the gk5e pointer from krb5_ctx.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The crypto/krb5 library accepts data in scatterlist form, but
the GSS-API layer presents RPC payloads as struct xdr_buf.
Bridge that gap with a pair of helper functions:
xdr_buf_to_sg() - populate a caller-supplied scatterlist
array from a byte range
xdr_buf_to_sg_alloc() - populate a caller-supplied inline
scatterlist, chaining to a heap-
allocated overflow for large payloads
The inline array (typically stack-allocated at eight entries)
covers the common case of small RPCs with no heap allocation
on the encrypt/decrypt path. Only buffers spanning many pages
incur a kmalloc for the chained extension.
The segment-walking logic follows the same head, page array,
tail traversal as xdr_process_buf(), but populates a
scatterlist directly rather than invoking a per-segment
callback. sg_next() traversal makes the walker safe for
chained scatterlists. Once subsequent patches reroute all
per-message crypto operations through crypto/krb5,
xdr_process_buf() loses its last callers and is removed.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Catch up various bits of documentation after the locking changes.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-13-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the IOCTL path similarly to how we converted Netlink.
The device lookup gets a little hairy. We could take rtnl_lock
unconditionally and drop it before calling the driver (this would
avoid the reference + liveness check). But I think being able
to make progress even if rtnl is dead-locked is quite useful.
First extra concern is handling features. List all the cmds which
modify features and always take rtnl_lock. We could fold this list
into ethtool_ioctl_needs_rtnl() but seems cleaner to keep
ethtool_ioctl_needs_rtnl() driver-related. If a driver changed
features and we were not holding rtnl_lock - warn about it.
It can only happen on buggy ops locked drivers (buggy because
they should have set appropriate "I need rtnl for op X" bit).
Second wrinkle is the PHY ID hack which drops the locks while
sleeping. Convert its static "busy" variable which used to
be protected by rtnl_lock to a field in struct ethtool_netdev_state.
This feature is about identifying an adapter or a port within
a system, so being able to blink multiple LEDs at the same
time is likely not very useful in practice. But it's the simplest
fix, we can add a mutex if someone thinks a system should only
be ID'ing one port at a time.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Module firmware flashing reads SFF-8024 identifier bytes via
.get_module_eeprom_by_page(). Other than that it modifies
a bit in the netdev->ethtool struct. Both should be ops-locked
at this point.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make ethtool not take rtnl_lock for SET commands when operation
is performed on an ops-locked driver. cfg/cfg_pending are now
ops-locked, since only ethtool modifies them.
Some SET driver callbacks will still need rtnl_lock, most notably
those which may end up calling netdev_update_features() or the qdisc
layer (via netif_set_real_num_tx_queues()). Let drivers selectively
opt back into the rtnl_lock with a new bitfield in ops.
We need two helpers since Netlink and ioctl cmds have different
values. Keep the helpers side by side in common.h to make sure
they get updated together, even tho they will only get called
from ioctl.c and netlink.c.
SET commands which don't use ethnl_default_set_doit() are converted
by subsequent commits.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethnl_default_doit() and ethnl_default_dump_one() are both used
exclusively for GET callbacks (former to get info for a single
device or get global strings). ops-locked devices don't need
rtnl_lock for GET callbacks, stop taking it.
Introduce an opt-out mechanism for devices which use phylink (fbnic)
since phylink currently depends on rtnl_lock protection. Subsequent
patches will add more exceptions, anyway. Practically the new helpers
for judging if command needs rtnl_lock could also call
netdev_need_ops_lock() but I find that it makes the code in the callers
slightly less obvious.
Add a helper for IOCTLs already, even tho it's unused so that
we can keep them in sync as the series progresses.
This is the first user-visible step of moving ethtool ops out
from under rtnl. Subsequent patches do the same for SET ops,
as well as the ioctl path.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev->hwprov tracks the active hwtstamp provider for the device.
Make it ops protected (instance lock if the netdev driver opts
into holding instance lock around callbacks, otherwise rtnl_lock).
hwprov is written and read in:
- drivers/net/phy/phy_device.c
phydev and ops protection don't currently mix, add a comment
- net/ethtool/
as of now holds both rtnl lock and ops lock, this one will
soon only hold one lock or the other
read in:
- net/core/dev_ioctl.c
holds both rtnl lock and ops lock
- net/core/timestamping.c
RCU reader
The new netdev_ops_lock_dereference() helper does not have
"compat" in the name. The name would be quite long and I think
in this case it should be obvious that we need _a_ lock.
netdev_lock_dereference() already exists and means dev->lock
is always expected.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phydev <> netdev linking and lifecycle depends on rtnl_lock.
We want to switch to instance locks for most ethtool ops.
Let's add an assert that ops locked devices don't use phydev
today. If one does we can either opt the phy ops out of
being purely ops locked, or do deeper surgery to make phy
locking ops-compatible. I don't think there's any fundamental
challenge to make that work.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for guard() and scoped_guard() for the hwmon subsystem lock
to simplify its use.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Commit e1c5ae59c0f2 ("fs: don't allow non-init s_user_ns for filesystems
without FS_USERNS_MOUNT") prevents the mount of any filesystem inside a
container that doesn't have FS_USERNS_MOUNT set.
This broke NFS mounts in our containerized environment. We have a daemon
somewhat like systemd-mountfsd running in the init_ns. A process does a
fsopen() inside the container and passes it to the daemon via unix
socket.
The daemon then vets that the request is for an allowed NFS server and
performs the mount. This now fails because the fc->user_ns is set to the
value in the container and NFS doesn't set FS_USERNS_MOUNT. We don't
want to add FS_USERNS_MOUNT to NFS since that would allow the container
to mount any NFS server (even malicious ones).
Add a new FS_USERNS_DELEGATABLE flag, and enable it on NFS.
Fixes: e1c5ae59c0f2 ("fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260129-twmount-v1-1-4874ed2a15c4@kernel.org
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@futurfusion.io>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v7.2
TI K3 TISCI:
- ti_sci: Add BOARDCFG_MANAGED mode for support system suspend/resume cycles
- ti_sci: Add support for restoring IRQ and clock contexts during resume.
- clk: keystone: sci-clk: Add clock restoration support.
SoC Drivers:
- k3-socinfo: Add support for identifying AM62P silicon variants via NVMEM,
along with corresponding dt-bindings update for nvmem-cells support
- k3-ringacc: Fix incorrect access mode for ring pop tail IO/proxy operations
Keystone Navigator (knav) Cleanup and Fixes:
- knav_qmss: Multiple code quality improvements
- knav_qmss_queue: Implement proper resource cleanup in the remove() path
General Cleanups:
- k3-ringacc: Use str_enabled_disabled() helper for consistency
- knav_qmss: Use %pe format specifier for PTR_ERR() printing
* tag 'ti-driver-soc-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: ti_sci: Add support for restoring clock context during resume
clk: keystone: sci-clk: Add restore_context() operation
firmware: ti_sci: Add support for restoring IRQs during resume
firmware: ti_sci: Add BOARDCFG_MANAGED mode support
soc: ti: k3-ringacc: Use str_enabled_disabled() helper
soc: ti: knav_dma: Use IOMEM_ERR_PTR() in pktdma_get_regs()
soc: ti: knav_dma: Remove dead check on unsigned args.args[0]
soc: ti: knav_dma: Remove unused DMA_PRIO_MASK macro
soc: ti: knav_qmss_acc: Fix kernel-doc Return: tag
soc: ti: knav_qmss: Fix __iomem annotations and __be32 type
soc: ti: knav_qmss: Use %pe to print PTR_ERR()
soc: ti: knav_qmss: Fix kernel-doc Return: tags
soc: ti: knav_qmss: Inline lockdep condition in for_each_handle_rcu
soc: ti: knav_qmss: Rename global kdev to knav_qdev to fix -Wshadow
soc: ti: knav_qmss: Remove remaining redundant ENOMEM printks
soc: ti: knav_qmss_queue: Implement resource cleanup in remove()
soc: ti: k3-ringacc: Fix access mode for k3_ringacc_ring_pop_tail_io/proxy
soc: ti: knav_dma: fix all kernel-doc warnings in knav_dma.h
soc: ti: k3-socinfo: Add support for AM62P variants via NVMEM
dt-bindings: hwinfo: ti,k3-socinfo: Add nvmem-cells support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v7.2
Improve Samsung Exynos (and Google GS101) ACPM (Alive Clock and Power
Manager) firmware driver:
1. Few code improvements.
2. Add support for protocol used to communicate with Thermal Management
Unit (TMU). This will allow to implement the thermal driver working
for newer Samsung Exynos and Google GS101 SoCs.
* tag 'samsung-drivers-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
firmware: samsung: acpm: Consolidate transfer initialization helper
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
firmware: samsung: acpm: Fix mailbox channel leak on probe error
firmware: samsung: acpm: Fix cross-thread RX length corruption
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are no callers of fbcon outside fbdev. Move the declarations
into the internal header.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Handle console remapping in fbcon in fb_switch_output(). Vga-switcheroo
invokes this functionality before switching physical outputs to a new
graphics device. Open-coding fbcon state in vga-switcheroo exposed fbdev
implementation details.
Vga-switcheroo is used for switching physical outputs among graphics
hardware. This functionality is only supported by DRM drivers. A later
update will further move fb_switch_output() into DRM's fbdev emulation;
thus fully decoupling vga-switcheroo from fbdev.
v3:
- remove Kconfig dependency related to fbcon (Geert)
v2:
- use '#if defined' (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Handle fbcon during display updates in fb_set_var_from_user(). Check
with fbcon if the mode change is possible, update hardware state and
finally update fbcon. Update all callers.
Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other
mode-changes callers in sysfs and driver code are missing fbcon-related
steps.
With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain
fbcon state themselves.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
