| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt
- Do not invalidate entire buffer for invalid sub-buffers
For the persistent ring buffer, if one sub-buffer is found to be
invalid, it invalidates the entire per CPU ring buffer. This can lose
a lot of valuable data if there's some corruption with the writes to
the buffer not syncing properly on a hard crash. Instead, if a
sub-buffer is found to be invalid, simply zero it out and mark it for
"missed events".
When the persistent ring buffer is read and a sub-buffer that was
cleared due to being invalid on boot up is discovered, the output
will show "[LOST EVENTS]" to let the user know that events were
missing at that location. Displaying the events from valid buffers
can still be useful.
- Add a test to be able to test corrupted sub-buffers
If a persistent ring buffer is created as "ptraingtest" and the new
config that adds the test is enabled, when a panic happens, the
kernel will randomly corrupt one of the per CPU ring buffers. On boot
up, the sub-buffers with the corruption should be cleared and
flagged. When reading this buffer, the missed events should should
[LOST EVENTS].
- Add commit number in the sub-buffer meta debug info
The commit is used to know the content of a meta page. Add it to the
buffer_meta file that is shown for each per CPU buffer.
- Clean up the persistent ring buffer validation code
Add some helper functions and make variable names more consistent.
* tag 'trace-ring-buffer-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Better comment the use of RB_MISSED_EVENTS
ring-buffer: Show persistent buffer dropped events in trace_pipe file
ring-buffer: Show persistent buffer dropped events in trace file
ring-buffer: Have dropped subbuffers be persistent across reboots
ring-buffer: Cleanup buffer_data_page related code
ring-buffer: Cleanup persistent ring buffer validation
ring-buffer: Show commit numbers in buffer_meta file
ring-buffer: Add persistent ring buffer invalid-page inject test
ring-buffer: Skip invalid sub-buffers when rewinding persistent ring buffer
ring-buffer: Skip invalid sub-buffers when validating persistent ring buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove a redundant IS_ERR() check
trace_pipe_open() already checks for IS_ERR() and does it again in
the return path. Remove the return check.
- Export seq_buf_putmem_hex() to allow kunit tests against them
To add Kunit tests on seq_buf_putmem_hex(), it needs to be exported.
- Replace strcat() and strcpy() with seq_buf() logic
The code for synthetic events uses a series of strcat() and strcpy()
which can be error prone. Replace them with seq_buf() logic that does
all the necessary bound checking.
- Add a lockdep rcu_is_watching() to trace_##event##_enabled() call
The trace_##event##_enabled() is a static branch that is true if the
"event" is enabled. But this can hide bugs if this logic is in a
location where RCU is disabled and not "watching". It would only
trigger if lockdep is enabled and the event is enabled.
Add a "rcu_is_watching()" warning if lockdep is enabled in that
helper function to trigger regardless if the event is enabled or not.
- Remove the local variable in the trace_printk() macro
For name space integrity, remove the _______STR variable in the
trace_printk() macro for using the sizeof() macro directly.
- Use guard()s for the trace_recursion_record.c file
- Fix typo in a comment of eventfs_callback() kerneldoc
- Use trace_call__##event() in events within trace_##event##_enabled()
A couple of events are called within an if block guarded by
trace_##event##_enabled(). That is a static key that is only enabled
when the event is enabled. The trace_call_##event() calls the
tracepoint code directly without adding a redundant static key for
that check.
- Allow perf to read synthetic events
Currently, perf does not have the ability to enable a synthetic
event. If it does, it will either cause a kernel warning or error
with "No such device". Synthetic events are not much different than
kprobes and perf can handle fine with a few modifications.
- Replace printk(KERN_WARNING ...) with pr_warn()
- Replace krealloc() on an array with krealloc_array()
- Fix README file path name for synthetic events
- Change tracing_map tracing_map_array to use a flexible array
Instead of allocating a separate pointer to hold the pages field of
tracing_map_array, allocate the pages field as a flexible array when
allocating the structure.
- Fold trace_iterator_increment() into trace_find_next_entry_inc()
The function trace_iterator_increment() was only used by
trace_find_next_entry_inc(). It's not big enough to be a helper
function for one user. Fold it into its caller.
- Make field_var_str field a flexible array of hist_elt_data
Instead of allocating a separate pointer for the field_var_str array
of the hist_elt_data structure, allocate it as a flexible array when
allocating the structure.
- Disable KCOV for trace_irqsoff.c
Like trace_preemptirq.c, trace_irqsoff.c has code that will crash
when KCOV is enabled on ARM. The irqsoff tracing can be called on ARM
because the irqsoff tracing code can be run from early interrupt code
and produce coverage unrelated to syscall inputs.
- Fix warning in __unregister_ftrace_function() called by perf
Perf calls unregister_ftrace_function() without checking if its
ftrace_ops has already been unregistered. There's an error path where
on clean up it will unregister the ftrace_ops even if it wasn't
registered and causes a warning.
* tag 'trace-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
perf/ftrace: Fix WARNING in __unregister_ftrace_function
tracing: Disable KCOV instrumentation for trace_irqsoff.o
tracing: Turn hist_elt_data field_var_str into a flexible array
tracing: Move trace_iterator_increment() into trace_find_next_entry_inc()
tracing: Simplify pages allocation for tracing_map logic
tracing: Fix README path for synthetic_events
tracing: Use krealloc_array() for trace option array growth
tracing/branch: Use pr_warn() instead of printk(KERN_WARNING)
tracing: Allow perf to read synthetic events
HID: Use trace_call__##name() at guarded tracepoint call sites
cpufreq: amd-pstate: Use trace_call__##name() at guarded tracepoint call site
tracefs: Fix typo in a comment of eventfs_callback() kerneldoc
tracing: Switch trace_recursion_record.c code over to use guard()
tracing: Remove local variable for argument detection from trace_printk()
tracepoint: Add lockdep rcu_is_watching() check to trace_##name##_enabled()
tracing: Bound synthetic-field strings with seq_buf
seq_buf: Export seq_buf_putmem_hex() and add KUnit tests
tracing: Remove redundant IS_ERR() check in trace_pipe_open()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2:
- core: fix subdev sensor ownership
- subdev: Allow accessing routes with STREAMS client capability
- ctrls: Add validation for HEVC active reference counts and
background detection control
- common: Add YUV24 format info and has_alpha helper
- vb2: Change vb2_read() and vb2_write() return types to ssize_t
- i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)
- atmel-isc: remove deprecated driver
- cec: Add CEC Latency Indication Protocol (LIP) support
- imon: Add iMON VFD HID OEM v1.2 key mappings
- AVMatrix: new HWS capture driver
- isp4: new AMD capture driver
- qcom:
- iris: Add hierarchical coding, B-frame, and Long-Term Reference
support for encoder
- camss: Add SM6350 platform support
- venus: Add SM6115 platform support
- chips-media: wave5: Add support for Packed YUV422, CBP profile, and
background detection
- csi2rx: Add multistream support and 32 dma chans
- Several cleanups and fixes
* tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
media: qcom: iris: vdec: update size and stride calculations for 10bit formats
media: qcom: iris: gen2: add support for 10bit decoding
media: qcom: iris: add QC10C & P010 buffer size calculations
media: qcom: iris: add helpers for 8bit and 10bit formats
media: qcom: iris: Fix FPS calculation and VPP FW overhead
media: qcom: camss: vfe-340: Support for PIX client
media: qcom: camss: vfe-340: Proper client handling
media: qcom: camss: csid-340: Enable PIX interface routing
media: qcom: camss: csid-340: Add port-to-interface mapping
media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
media: iris: Initialize HFI ops after firmware load in core init
media: iris: drop struct iris_fmt
media: iris: Add platform data for X1P42100
media: iris: Add hardware power on/off ops for X1P42100
media: iris: optimize COMV buffer allocation for VPU3x and VPU4x
media: iris: add FPS calculation and VPP FW overhead in frequency formula
media: qcom: iris: Simplify COMV size calculation
...
|
|
strncpy() has been a persistent source of bugs due to its ambiguous
intended usage and frequently counter-intuitive semantics: it may not
NUL-terminate the destination, and it unconditionally zero-pads to the
full length, which isn't always needed. All former callers have been
migrated[1] to:
- strscpy() for NUL-terminated destinations
- strscpy_pad() for NUL-terminated destinations needing zero-padding
- strtomem_pad() for non-NUL-terminated fixed-width fields
- memcpy_and_pad() for bounded copies with explicit padding
- memcpy() for known-length copies
Remove the generic implementation, its declaration, the FORTIFY_SOURCE
wrapper, and associated tests.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add OF helpers for parsing the power-domains-child-ids property
- Extend the power domain DT binding with power-domains-child-ids
- Switch to use the dynamic root device
pmdomain providers:
- arm: Add support for domain hierarchies to SCMI power domains
- qcom: Add power domains for the Shikra and Nord SoCs
- sunxi: Fix GPU support on Radxa Cubie A7Z by keeping power domain on"
* tag 'pmdomain-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: fix unused variable warning with !PM_GENERIC_DOMAINS_OF
pmdomain: core: fix early domain registration
pmdomain: mediatek: mfg: move __packed after struct name to fix kernel-doc
pmdomain: qcom: rpmpd: Add Shikra RPM Power Domains
pmdomain: qcom: rpmhpd: Add power domains for Nord SoC
dt-bindings: power: qcom,rpmpd: document the Shikra RPM Power Domains
pmdomain: sunxi: support power domain flags for pck600
pmdomain: core: switch to dynamic root device
pmdomain: qcom: Unify user-visible "Qualcomm" name
dt-bindings: power: qcom,rpmhpd: Add RPMh power domain for Nord SoC
dt-bindings: power: qcom,rpmhpd: Fix whitespace in RPMHPD defines
pmdomain: arm_scmi: add support for domain hierarchies
pmdomain: core: add support for power-domains-child-ids
dt-bindings: power: Add power-domains-child-ids property
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add new generic callbacks to populate per-pin pin controllers
creating groups and functions from the device tree building out
pinctrl_generic_to_map() and move the Spacemit driver over to use
this
- Generic board-level pin control driver using the mux framework
New pin controller drivers:
- Amlogic (meson) A9 SoC
- Aspeed AST2700 SoC0 and SoC1
- nVidia Tegra264 and Tegra238
- Qualcomm Nord TLMM, Shikra TLMM, SM6350 LPASS LPI, and IPQ9650 TLMM
- Renesas RZ/G3L SoC
- UltraRISC DP1000
Improvements:
- Handle pull up/pull down properly in the Renesas RZG2L driver
- Fix up nVidia Tegra 234 DT bindings
- Fix up pin definitions in the Qualcomm Eliza driver
- Qualcomm PM8010 GPIO support in the PM8010
- Qualcomm SM6115 EGPIO support in the SM6115
- Switch Qualcomm LPASS LPI drivers to use runtime PM for power
management
- Clean up the Qualcomm Kconfig business a bit to include the
necessary drivers for each subarch
- Fix output glitch in the Amlogic (meson) A4 pin controller
- Move the Airoha driver from the Mediatek directory to its own
directory. It is too different from other Mediatek hardware
- A slew of fixes to the Airoha AN7581 and AN7583 drivers"
* tag 'pinctrl-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (151 commits)
pinctrl: Export pinctrl_get_group_selector()
pinctrl: Match DT helper types
pinctrl: qcom: Register functions before enabling pinctrl
pinctrl: meson: amlogic-a4: use nolock get range
pinctrl: ultrarisc: Add UltraRISC DP1000 pinctrl driver
dt-bindings: pinctrl: Add UltraRISC DP1000 pinctrl controller
pinctrl: qcom: Remove unused macro definitions
pinctrl: tegra: PINCTRL_TEGRA264 should depend on ARCH_TEGRA
pinctrl: tegra: PINCTRL_TEGRA238 should depend on ARCH_TEGRA
pinctrl: tegra238: add missing AON pin groups
dt-bindings: pinctrl: tegra238: add missing AON pin groups
pinctrl: airoha: an7583: remove undefined groups from pcm_spi pin function
pinctrl: airoha: an7583: fix phy1_led1 pin function
pinctrl: airoha: an7583: add missed gpio22 pin group
pinctrl: airoha: an7583: fix gpio21 pin group
pinctrl: airoha: fix pwm pin function for an7581 and an7583
pinctrl: airoha: an7583: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7581: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7583: fix misprint in gpio19 pinconf
pinctrl: airoha: an7581: fix misprint in gpio19 pinconf
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
includes flash and RGB LED controllers
- Texas Instruments:
- LP5812: Add support for the TI LP5812 LED driver
- LP5860: Add support for the Texas Instruments LP5860 LED matrix
driver via SPI
Improvements & Fixes:
- Core:
- Adjust the brightness sysfs node documentation to clarify that
only decimal values are accepted
- Fix a race condition in the software blink logic when stopping
blinking and setting brightness simultaneously
- Introduce the `multi_max_intensity` sysfs attribute for
multicolor LEDs to support hardware-based global brightness
control
- Replace OF-based device lookup with firmware node equivalents
to support ACPI and software nodes
- Return `ENODATA` when reading brightness from
hardware-controlled LEDs
- Set the coherent DMA mask to zero for the Samsung PMIC device
to suppress unnecessary "DMA mask not set" messages
- ams OSRAM AS3668: Fix a Kconfig symbol name mismatch in the
Makefile that prevented the driver from being built
- BlinkM: Fix spelling and comment style issues in the driver
- DAC124S085: Declare the SPI command word as `__le16` to ensure
correct endianness and pass sparse checks
- GPIO Trigger: Use `GPIOD_FLAGS_BIT_NONEXCLUSIVE` to allow sharing
GPIOs between the LED trigger and other drivers
- NXP PCA9532: Fix an issue where the LED would stop blinking when
changing brightness to a non-zero value
- Qualcomm: Unify the user-visible company name to "Qualcomm" across
flash LED config options
- Qualcomm LPG: Optimize memory allocation by combining main
structure and channels into a single allocation using flexible
array members
- Texas Instruments
- LP5860: Add missing `CONFIG_OF` dependency to prevent build
warnings
- TPS6131x: Increase the overvoltage protection threshold to 6V
to avoid false triggers with 5V input supplies
- Userspace LEDs (uLEDs):
- Fix a potential buffer overread by using `strnchr()` for name
string validation
- Return `-EFAULT` on `copy_to_user()` failure to properly handle
read errors
Cleanups & Refactoring:
- Core:
- Convert various `i2c_device_id` arrays to use named
initializers for improved robustness and readability
- Multi-color: Fix incorrect `KernelVersion` and `Date` tags for
the `multi_max_intensity` ABI
- Broadcom BCM63138 / ChromeOS EC: Move `MODULE_DEVICE_TABLE`
declarations next to the ID tables for consistency
- LP5812: Fix a sysfs ABI reference in the documentation
- ST1202: Remove an unused legacy GPIO header include
Device Tree Binding Updates:
- Class: Document the keyboard backlight LED class naming
conventions, including a new scheme for zoned backlights
- Core: Dual-license the common LED bindings header under GPLv2
and BSD-2-Clause
- IR SPI LED: Add a new 30% duty-cycle value for the IR transmitter
used in Xiaomi Redmi Note 8
- Samsung S2M series:
- Document the flash LED device bindings for Samsung S2M series
PMICs
- Document the pattern behavior for Samsung S2M series PMIC RGB
- S2MU005: Add device tree bindings for the S2MU005 PMIC,
including its flash and RGB LED sub-devices
- TI LM3560: Document the TI LM3559 and LM3560 synchronous boost
flash drivers"
* tag 'leds-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
leds: tps6131x: Increase overvoltage protection threshold to 6V
leds: Fix sysfs ABI date
leds: Fix CONFIG_OF dependency for LEDS_LP5860_CORE
leds: uleds: Fix potential buffer overread
leds: Use named initializers for arrays of i2c_device_data
leds: uleds: Return -EFAULT on copy_to_user() failure
leds: core: Report ENODATA for brightness of hardware controlled LED
leds: class: Use firmware nodes for device lookup
Documentation: leds: Document pattern behavior of Samsung S2M series PMIC RGB LEDs
leds: rgb: Add support for Samsung S2M series PMIC RGB LED device
leds: flash: Add support for Samsung S2M series PMIC flash LED device
dt-bindings: leds: Document Samsung S2M series PMIC flash LED device
leds: core: Fix race condition for software blink
leds: Adjust documentation of brightness sysfs node
leds: dac124s085: Declare SPI command word as __le16
leds: Introduce the multi_max_intensity sysfs attribute
dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver
leds: bcm63138/cros_ec: Move MODULE_DEVICE_TABLE next to the table itself
leds: Add support for TI LP5860 LED driver chip
Documentation: leds: leds-class: Document keyboard backlight LED class naming
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Renesas RSMU: Add support for the IDT 8a34002 Clock Matrix
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
includes charger, MUIC, flash and RGB LED controllers
- SpacemiT P1: Add a reboot cell for the SpacemiT P1 chip
- Texas Instruments BQ25792: Add support for the TI BQ25792 charger
manager
Improvements & Fixes:
- Core: Unify the user-visible company name to "Qualcomm" across
various config options
- ChromeOS EC:
- Delay `dev_set_drvdata()` until the probe process has
successfully completed to avoid use-after-free issues
- Prevent adding `cros_ec_ucsi` as an MFD sub-device if it is
already defined in Device Tree or ACPI
- Cirrus Logic CS42L43: Add a sanity check for firmware size to
prevent out-of-bounds memory access during firmware loading
- Cirrus Logic CS5535: Associate the GPIO cell with a dedicated
software node to support board files requesting GPIOs
- Maxim MAX77620: Modernize poweroff handling by converting to the
sys-off API
- Qualcomm RPM: Add the missing QDSS clock resource for the MSM8960
SoC
- Renesas RSMU: Fix page register setup for the 8A3400x family by
correctly calculating the page address
- Renesas RZ/MTU3:
- Make the reset line optional to support newer SoC variants
(RZ/T2H, RZ/N2H)
- Modernize the driver by using device-managed APIs for reset
control and device addition
- Samsung Core: Set the coherent DMA mask to zero for the Samsung
PMIC device to suppress unnecessary "DMA mask not set" messages
- Silicon Motion SM501: Fix a reference leak on failed device
registration by properly dropping the platform device reference
- Texas Instruments:
- TPS65219: Make poweroff handler registration conditional on the
"system-power-controller" Device Tree property
- TPS6586x: Fix Device Tree node reference counting by manually
bumping the refcount for sub-devices
- TPS65910: Add return value checking for the dummy I2C transfer
used to work around silicon erratum SWCZ010
- TWL4030: Update board-specific checks to use Device Tree
compatibles instead of legacy machine IDs
Cleanups & Refactoring:
- Core: Consistently define `pci_device_id` arrays using named
initializers across various Intel and Silicon Motion drivers
- Maintainers: Shift maintenance of Samsung PMIC drivers to André
Draszik
- Maxim MAX77759: Improve code style by reformatting the IRQ table
and refining macro comments
- MEN MENF21BMC / Texas Instruments TWL: Correctly treat
`i2c_check_functionality()` as returning a boolean status
- Rohm BD72720: Drop the non-existent BUCK11 ID to improve code
clarity
- Silicon Labs Si476x: Fix various spelling mistakes in driver
comments
- Spreadtrum SC27xx: Transition to `devm_mfd_add_devices()` and
separate MFD cell tables for each PMIC model
- Timberdale: Move GPIO pin definitions into the driver and
transition to using a software node for the GPIO cell
- Wolfson WM8994: Remove dead legacy-GPIO code and its associated
`irq_gpio` member
Device Tree Binding Updates:
- Aspeed AST2x00: Document the AST2700 SCU0 and add support for its
SoC0/SoC1 pin controllers
- Hisilicon Hi655x: Convert the Hi655x PMIC binding from text format
to YAML DT schema
- Khadas MCU: Add a new compatible and fan-supply property for the
Khadas VIM4 MCU
- MediaTek MT6397: Add support for the MT6365 PMIC and document
regulator supplies for the MT6359 variant
- Qualcomm TCSR: Add compatibles for Nord and IPQ5210 TCSR blocks
- Renesas RZ/G3L: Revert the addition of the
`renesas,r9a08g046-lvds-cmn` compatible string due to documentation
errors
- Samsung S2MU005: Document the S2MU005 PMIC and its sub-devices
(charger, MUIC, flash and RGB LEDs)
- Spreadtrum SC2731: Include regulator bindings for the SC2730
variant
- STMPE: Fix the schema by marking 'compatible' and '#pwm-cells' as
required for the PWM subnode
- Texas Instruments BQ257xx: Expand the BQ25703A binding to include
the BQ25792 variant
Removals:
- Motorola EZX PCAP: Remove the unused and non-functional driver for
Motorola EZX phones"
* tag 'mfd-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (47 commits)
dt-bindings: mfd: syscon: Revert renesas,r9a08g046-lvds-cmn
dt-bindings: mfd: st,stmpe: Add missing properties for PWM subnode
mfd: rz-mtu3: Make reset optional
mfd: rz-mtu3: Store &pdev->dev in local variable
mfd: rz-mtu3: Use local variable for reset
mfd: rz-mtu3: Use device-managed APIs
dt-bindings: mfd: aspeed,ast2x00-scu: Support AST2700 SoC1 pinctrl
mfd: tps6586x: Fix OF node refcount
dt-bindings: mfd: sprd,sc2731: Include SC2730 regulator bindings
mfd: twl4030-power: Update checks for specific boards to use the DT
dt-bindings: mfd: qcom,tcsr: Document the IPQ5210 TCSR block
mfd: qcom_rpm: Add msm8960 QDSS clock resource
mfd: si476x-i2c: Fix spelling mistakes in comments
mfd: max77620: Convert poweroff support to sys-off API
mfd: dt-bindings: mt6397: Add regulator supplies
dt-bindings: mfd: mediatek: mt6397: Add MT6365 PMIC support
dt-bindings: mfd: mediatek: mt6397: Add rtc for MT6359
mfd: cs42l43: Sanity check firmware size
mfd: qcom: Unify user-visible "Qualcomm" name
mfd: cros_ec: Delay dev_set_drvdata() until probe success
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- A major rework of the fast commit mechanism to avoid lock contention
and deadlocks. We also export snapshot statistics in
/proc/fs/ext4/*/fc_info
- Performance optimization for directory hash computation by processing
input in 4-byte chunks and removing function pointers, along with new
KUnit tests for directory hash
- Cleanups in JBD2 to remove special slabs and use kmalloc() instead
- Various bug fixes, including:
- Early validation of donor superblock in EXT4_IOC_MOVE_EXT to
avoid cross-fs deadlock
- Fix for a kernel BUG in ext4_write_inline_data_end under
data=journal
- Fix for a NULL dereference in jbd2_journal_dirty_metadata when
handle is aborted
- Fix for an underflow in JBD2 fast commit block initialization
check
- Fix for LOGFLUSH shutdown ordering to ensure ordered data
writeback
- Miscellaneous fixes for error path return values and KUnit
assertions
* tag 'ext4_for_linus-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT
ext4: fix kernel BUG in ext4_write_inline_data_end
ext4: fix ERR_PTR(0) in ext4_mkdir()
jbd2: remove special jbd2 slabs
ext4: remove mention of PageWriteback
ext4: improve str2hashbuf by processing 4-byte chunks and removing function pointers
ext4: add Kunit coverage for directory hash computation
ext4: fast commit: export snapshot stats in fc_info
ext4: fast commit: add lock_updates tracepoint
ext4: fast commit: avoid i_data_sem by dropping ext4_map_blocks() in snapshots
ext4: fast commit: avoid self-deadlock in inode snapshotting
ext4: fast commit: avoid waiting for FC_COMMITTING
ext4: lockdep: handle i_data_sem subclassing for special inodes
ext4: fast commit: snapshot inode state before writing log
jbd2: fix integer underflow in jbd2_journal_initialize_fast_commit()
ext4: fix fast commit wait/wake bit mapping on 64-bit
jbd2: check for aborted handle in jbd2_journal_dirty_metadata()
ext4: Use %pe to print PTR_ERR()
ext4: fix LOGFLUSH shutdown ordering to allow ordered-mode data writeback
ext4: replace KUnit tests for memcmp() with KUNIT_ASSERT_MEMEQ()
|
|
Pull nfsd updates from Chuck Lever:
"Jeff Layton wired up netlink upcalls for the auth.unix.ip and
auth.unix.gid caches in SunRPC and the svc_export and nfsd.fh caches
in NFSD. The new kernel-user API is more extensible and lays the
groundwork for retiring the old pipe interface.
The default NFS r/w block size rises to 4MB on hosts with at least
16GB of RAM, reducing per-RPC overhead on fast networks. Smaller
machines keep their previously computed default, and the value remains
tunable through /proc/fs/nfsd/max_block_size.
Chuck Lever converted the server's RPCSEC GSS Kerberos code to the
kernel's shared crypto/krb5 library. The conversion retires and
removes SunRPC's bespoke implementation of Kerberos v5, but keeps
RPCSEC GSS-API.
Continuing the xdrgen migration that converted the NLMv4 server XDR
layer in v7.1, Chuck Lever converted the NLM version 3 server-side XDR
layer from hand-written C to xdrgen-generated code. As with the NLMv4
conversion in v7.1, the goals are improved memory safety, lower
maintenance burden, and groundwork for generation of Rust code for
this layer instead of C.
Chuck Lever fixed an issue where lingering NFSv4 state pins a mounted
file system after it is unexported. A new netlink-based mechanism can
now release NLM locks and NFSv4 state by client address, by
filesystem, and by export. Now an administrator can quiesce an export
cleanly before unmounting it.
The remaining patches are bug fixes, clean-ups, and minor
optimizations, including a batch of memory-leak and use-after-free
fixes in the ACL, lockd, and TLS handshake paths, many of them
reported by Chris Mason. Sincere thanks to all contributors,
reviewers, testers, and bug reporters who participated in the v7.2
NFSD development cycle"
* tag 'nfsd-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (106 commits)
svcrdma: wake sq waiters when the transport closes
nfsd: reset write verifier on deferred writeback errors
nfsd: avoid leaking pre-allocated openowner on unconfirmed retry race
sunrpc: wait for in-flight TLS handshake callback when cancel loses race
sunrpc: pin svc_xprt across the asynchronous TLS handshake callback
nfsd: fix posix_acl leak on SETACL decode failure
nfsd: fix posix_acl leak and ignored error in nfsd4_create_file
nfsd: check get_user() return when reading princhashlen
nfsd: fix inverted cp_ttl check in async copy reaper
nfsd: fix dead ACL conflict guard in nfsd4_create
NFSD: Fix SECINFO_NO_NAME decode error cleanup
sunrpc: harden rq_procinfo lifecycle to prevent double-free
SUNRPC: Return an error from xdr_buf_to_bvec() on overflow
SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing
nfsd: release layout stid on setlease failure
lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file()
lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure
lockd: Plug nlm_file leak when nlm_do_fopen() fails
Revert "NFSD: Defer sub-object cleanup in export put callbacks"
Revert "svcrdma: Use contiguous pages for RDMA Read sink buffers"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix lots of bugs, most from the late 6.x era, but some going back
to 2.6.x
- Add subsystems (io-uring, passthrough) and respective maintainers
(Bernd, Joanne and Amir)
- Separate transport and fs layers (Miklos)
- Don't block on cat /dev/fuse (Joanne)
- Perform some refactoring in fuse-uring (Joanne)
- Don't use bounce-buffer for READDIR reply in virtio-fs (Matthew Ochs)
- Clean up documentation (Randy)
- Improve tracing (Amir)
- Extend page cache invalidation after DIO (Cheng Ding)
- Invalidate readdir cache on epoch change (Jun Wu)
- Misc cleanups
* tag 'fuse-update-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (81 commits)
fuse-uring: clear ent->fuse_req in commit_fetch error path
fuse-uring: use named constants for io-uring iovec indices
fuse-uring: refactor setting up copy state for payload copying
fuse-uring: use enum types for header copying
fuse-uring: refactor io-uring header copying from ring
fuse-uring: refactor io-uring header copying to ring
fuse-uring: separate next request fetching from sending logic
fuse: invalidate readdir cache on epoch bump
virtio-fs: avoid double-free on failed queue setup
fuse: invalidate page cache after DIO and async DIO writes
fuse: set ff->flock only on success
fuse: clean up interrupt reading
fuse: remove stray newline in fuse_dev_do_read()
fuse: use READ_ONCE in fuse_chan_num_background()
fuse: dax: Move long delayed work on system_dfl_long_wq
fuse: add fuse_request_sent tracepoint
fuse: Add SPDX ID lines to some files
fuse: use QSTR() instead of QSTR_INIT() in fuse_get_dentry
fuse: convert page array allocation to kcalloc()
fuse: use current creds for backing files
...
|
|
Pull rdma updates from Jason Gunthorpe:
"Many AI driven bug fixes, and several big driver API cleanups
- Driver bug fixes and minor cleanups in mlx5, hns, rxe, efa, siw,
rtrs, mana, irdma, mlx4. Commonly error path flows, integer
arithmetic overflows on unsafe data, out of bounds access, and use
after free issues under races.
- Second half of the new udata API for drivers focusing on uAPI
response
- bnxt_re supports more options for QP creation that will allow a dv
path in rdma-core
- Untangle the module dependencies so drivers don't link to
ib_uverbs.ko as was originall intended
- Provide a new way to handle umems with a consistent simplified uAPI
and update several drivers to use it. This brings dmabuf support to
more places and more drivers
- Support for mlx5 rate limit and packet pacing for UD and UC
- A batch of fixes for the new shared FRMR pools infrastructure"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (148 commits)
RDMA/irdma: Replace waitqueue and flag with completion
RDMA/hns: Fix memory leak of bonding resources
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
docs: infiniband: correct name of option to enable the ib_uverbs module
RDMA/bnxt_re: Reject GET_TOGGLE_MEM when toggle page was not allocated
RDMA/bnxt_re: Fail DBR related page allocation UAPIs if the feature is disabled
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
RDMA/bnxt_re: Proper rollback if the ioremap fails
RDMA/bnxt_re: Add a max slot check for SQ
RDMA/bnxt_re: Avoid displaying the kernel pointer
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
RDMA/bnxt_re: Initialize dpi variable to zero
ABI: sysfs-class-infiniband: minor cleanup
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
RDMA/mlx5: Fix undefined shift of user RQ WQE size
RDMA/mlx5: Remove raw RSS QP restrack tracking
RDMA/mlx5: Remove DCT restrack tracking
RDMA/mlx5: Drop FRMR pool handle on UMR revoke failure
RDMA/core: Add ib_frmr_pool_drop for unrecoverable handles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Bump required Clang version to 23 (Marco), and add Clang context
analysis annotations (Bart)
- Use the ahci_nr_ports() helper in libahci (me)
- Fail to probe the ahci driver if the BAR size is smaller than the
required size to support CAP.NP (Number of Ports) (liyouhong)
- Move EXPORT_SYMBOL_GPL(ahci_do_softreset) to be just below the
function definition (Bart)
- Make ata_scsi_scan_host() schedule hotplug work on the
system_dfl_long_wq workqueue so that it can benefit from scheduler
task placement (Marco)
- Make ata_scsi_port_error_handler() schedule hotplug work on the
system_dfl_long_wq workqueue, such that the work always uses the same
workqueue (me)
- Use devm_platform_get_and_ioremap_resource() in pata_arasan_cf driver
(Rosen)
- Fix ata_exec_internal() to only release and acquire the EH mutex if
the calling function is the one holding the EH mutex (Bart)
- Use hweight_long() to count the port_map bits (TanZheng)
- Add COMPILE_TEST support for pata_ep93xx driver (Rosen)
- Drop unused assignments from pata_isapnp driver (Uwe)
- Extend existing JMicron PMP quirk to include JMicron JMS562 (Xu)
- Drop unused assignments of pci_device_id driver data (Uwe)
- Use named initializers for pci_device_id arrays (Uwe)
* tag 'ata-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: Use named initializers for pci_device_id arrays
ata: Drop unused assignments of pci_device_id driver data
ata: libata-pmp: add JMicron JMS562 quirk
ata: pata_isapnp: Drop unused assignments from pnp_device_id array
ata: pata_ep93xx: add COMPILE_TEST support
ata: pata_ep93xx: use unsigned long for data
ata: pata_ep93xx: avoid asm on non ARM
ata: Annotate functions in the issuing path with __must_hold()
ata: libata: Pass ap parameter directly to functions in the issuing path
ata: libata: Document when host->eh_mutex should be held
ata: libata: Add an argument to ata_eh_reset()
ata: ahci: use hweight_long() to count port_map bits
ata: libata: Fix ata_exec_internal()
ata: pata_arasan_cf: simplify ioremap
ata: libata-eh: queue hotplug work on the system_dfl_long_wq workqueue
ata: libata-scsi: Move long delayed work on system_dfl_long_wq
ata: ahci: Move EXPORT_SYMBOL_GPL(ahci_do_softreset)
ata: ahci: fail probe if BAR too small for claimed ports
ata: libahci: use ahci_nr_ports() helper
|
|
Since the @GFP parameter in kmalloc_obj() etc. is now optional, change
the kernel-doc to indicate that it is optional. This avoids kernel-doc
warnings:
WARNING: include/linux/slab.h:1101 Excess function parameter 'GFP' description in 'kmalloc_obj'
WARNING: include/linux/slab.h:1113 Excess function parameter 'GFP' description in 'kmalloc_objs'
WARNING: include/linux/slab.h:1128 Excess function parameter 'GFP' description in 'kmalloc_flex'
Fixes: e19e1b480ac7 ("add default_gfp() helper macro and use it in the new *alloc_obj() helpers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260617163125.2716279-1-rdunlap@infradead.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
This is required by users that want to use kmem buckets, but still
desire specifying the NUMA node.
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260611124642.345400-2-pfalcato@suse.de
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Finish the switch away from __GFP_NO_OBJ_EXT by replacing it with
SLAB_ALLOC_NO_RECURSE when allocating empty sheaves. Pass alloc_flags to
[__]alloc_empty_sheaf(). Callers that can't be part of a recursive
kmalloc() chain simply pass SLAB_ALLOC_DEFAULT. Use kmalloc_flags()
instead of kzalloc() for allocating the sheaf.
With that we can finalize the removal the __GFP_NO_OBJ_EXT handling from
obj_ext allocations as well, leaving only SLAB_ALLOC_NO_RECURSE in
place.
This leaves __GFP_NO_OBJ_EXT with no users in slab, so stop allowing the
flag in kmalloc_nolock().
Link: https://patch.msgid.link/20260610-slab_alloc_flags-v2-16-7190909db118@kernel.org
Reviewed-by: Hao Li <hao.li@linux.dev>
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"All various fixes:
- Typo breaking the veventq uAPI for 32 bit userspace
- Several Sashiko found errors in the veventq and fault fd paths
- Fix incorrect use of dmabuf locks, and possible races with iommufd
destroy and dmabuf revoke
- Sashiko errors found in the uAPI validation for IOMMU_HWPT_INVALIDATE"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Avoid copying the user array twice in the full-array copy helper
iommufd/selftest: Add invalidation entry_num and entry_len boundary tests
iommufd: Set upper bounds on cache invalidation entry_num and entry_len
iommufd: Clarify IOAS_MAP_FILE dma-buf support
iommufd: Destroy the pages content after detaching from dmabuf
iommufd: Take dma_resv lock before dma_buf_unpin() in release path
iommufd/selftest: Cover invalid read counts on vEVENTQ FD
iommufd: Avoid partial fault group delivery in iommufd_fault_fops_read()
iommufd: Break the loop on failure in iommufd_fault_fops_read()
iommufd: Reject invalid read count in iommufd_fault_fops_read()
iommufd: Propagate allocation failure in iommufd_veventq_deliver_fetch()
iommufd: Reject invalid read count in iommufd_veventq_fops_read()
iommufd: Rewind header length in done if iommufd_veventq_fops_read() fails
iommufd/selftest: Add boundary tests for veventq_depth
iommufd: Set veventq_depth upper bound
iommufd: Move vevent memory allocation outside spinlock
iommufd: Fix data_len byte-count vs element-count mismatch
iommufd: Use sizeof(*hdr) instead of sizeof(hdr) in veventq read
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core Code:
- Fix dma-iommu scatterlist length handling in the P2PDMA path
- Extend the generic IOMMU page-table code with detailed gather
support for more precise invalidations
- Add pending-gather tracking to generic page-table invalidation
handling
- Add support for smaller virtual address sizes in the generic AMDv1
page-table format, including KUnit coverage
- Fix page-size bitmap calculation for smaller VA configurations
- Rework Arm io-pgtable allocation/freeing to consistently use the
iommu-pages API and address-conversion helpers
- Add PCI ATS infrastructure for devices that require ATS, including
always-on ATS handling for pre-CXL devices
AMD IOMMU:
- Fix several IOTLB invalidation details, including PDE handling,
flush-all behavior, and command address encoding
- Honor IVINFO[VASIZE] when deriving address limits
- Fix premature loop termination in init_iommu_one()
- Add Hygon family 18h model 4h IOAPIC support
- Clean up legacy-mode handling, stale comments, dead IVMD
exclusion-range code, and unused address-size macros
Arm SMMU / Arm SMMU v3:
- SMMUv2:
- Device-tree binding updates for Qualcomm Hawi, Nord and Shikra
SoCs
- Constrain the clocks which can be specified for recent Qualcomm
SoCs
- Fix broken compatible string for Qualcomm prefetcher
configuration an add new entry for the Glymur MDSS
- Ensure SMMU is powered-up when writing context bank for Adreno
client
- SMMUv3:
- Fix off-by-one in queue allocation retry loop
- Enable hardware update of access/dirty bits from the SMMU
- Re-jig command construction to use separate inline helpers for
each command type
Intel VT-d:
- Add the PCI segment number to DMA fault messages
- Improve support for non-PRI mode SVA
- Ensure atomicity during context entry teardown
- Fix RB-tree corruption in the probe error path
RISC-V IOMMU:
- Add NAPOT range invalidation support
- Use detailed gather information for invalidation decisions
- Compute the best stride for single invalidations
- Advertise Svpbmt support to the generic page-table code
- Add capability definitions and clean up command macro encoding
VeriSilicon IOMMU:
- Add a new VeriSilicon IOMMU driver
- Add devicetree binding documentation and MAINTAINERS coverage
- Add the RK3588 VeriSilicon IOMMU node
- Apply small cleanups and warning fixes in the new driver
Rockchip IOMMU:
- Disable the fetch DTE time limit
Apple DART:
- Correct a stale CONFIG_PCIE_APPLE macro name in a comment"
* tag 'iommu-updates-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (66 commits)
iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path
iommu/amd: Control INVALIDATE_IOMMU_PAGES PDE from the gather
iommu/amd: Make CMD_INV_IOMMU_ALL_PAGES_ADDRESS match the spec
iommu/amd: Have amd_iommu_domain_flush_pages() use last
iommu/amd: Pass last in through to build_inv_address()
iommu/amd: Simplify build_inv_address()
iommu/apple-dart: correct CONFIG_PCIE_APPLE macro name in comment
iommu/vt-d: Fix RB-tree corruption in probe error path
iommu/vt-d: Improve IOMMU fault information
iommu/vt-d: Remove typo from pasid_pte_config_nested()
iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry
iommu/vt-d: Avoid WARNING in sva unbind path
dt-bindings: arm-smmu: Correct and add constraints for Hawi, Shikra and Kaanapali
dt-bindings: arm-smmu: Add compatible for Qualcomm Nord SoC
iommu/amd: Don't split flush for amd_iommu_domain_flush_all()
iommu/rockchip: disable fetch dte time limit
iommu/arm-smmu-v3: Allow ATS to be always on
PCI: Allow ATS to be always on for pre-CXL devices
PCI: Add pci_ats_required() for CXL.cache capable devices
iommu/vsi: Use list_for_each_entry()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for handling multiple cells in "iommu-map" entries
- Support only 1 entry in /reserved-memory "reg" entries. Support for
more than 1 entry has been broken
- Fix a UAF on alloc_reserved_mem_array() failure
- Make "ibm,phandle" handling logic specific to PPC
- Use memcpy() instead of strcpy() for known length strings
- Ensure __of_find_n_match_cpu_property() handles malformed "reg"
entries
- Add various checks that expected strings are strings before
accessing them
- Drop redundant memset() when unflattening DT
DT bindings:
- Add a DTS style checker. Currently hooked up to dt_binding_check to
check examples
- Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
bindings to DT schema
- Add Apple System Management Controller hwmon, Qualcomm Hamoa
Embedded Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323,
Samsung SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder,
Samsung S2M series PMIC extcon, and MT6365 PMIC AuxADC schemas
- Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
- Consolidate "sram" property definitions
- Fix constraints on "nvmem" properties which only contain phandles
and no arg cells
- Another pass of fixing "phandle-array" constraints
- Add Gira vendor prefix"
* tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
dt-bindings: interrupt-controller: qcom,pdc: Add Maili compatible string
dt-bindings: interrupt-controller: ti,irq-crossbar: Convert to DT schema
dt-bindings: vendor-prefixes: add Gira
dt-bindings: embedded-controller: Add Qualcomm reference device EC description
dt-bindings: pwm: add IPQ6018 binding
dt-bindings: hwmon: Add Apple System Management Controller hwmon schema
docs: dt: writing-schema: Clarify what is required in a schema
of: Respect #{iommu,msi}-cells in maps
of: Factor arguments passed to of_map_id() into a struct
of: Add convenience wrappers for of_map_id()
of: reserved_mem: zero total_reserved_mem_cnt if no valid /reserved-memory entry
of: reserved_mem: handle NULL name in of_reserved_mem_lookup()
dt-bindings: cache: l2c2x0: Add missing power-domains
dt-bindings: interrupt-controller: renesas,r9a09g077-icu: Fix reg size in example
dt-bindings: nvmem: consumer: Make 'nvmem' an array of one-item entries
drivers/of/overlay: Use memcpy() to copy known length strings
dt-bindings: add self-test fixtures for style checker
dt-bindings: wire style checker into dt_binding_check
scripts/jobserver-exec: propagate child exit status
dt-bindings: add DTS style checker
...
|
|
Pull virtio updates from Michael Tsirkin:
- new virtio CAN driver
- support for LoongArch architecture in fw_cfg
- support for firmware notifications in vdpa/octeon_ep
- support for VFs in virtio core
- fixes, cleanups all over the place, notably:
- vhost: fix vhost_get_avail_idx for a non empty ring
fixing an significant old perf regression
- READ_ONCE() annotations mean virtio ring is now
free of KCSAN warnings
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (37 commits)
can: virtio: Fix comment in UAPI header
can: virtio: Add virtio CAN driver
virtio: add num_vf callback to virtio_bus
fw_cfg: Add support for LoongArch architecture
vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler
vdpa/octeon_ep: Add vDPA device event handling for firmware notifications
vdpa/octeon_ep: Use 4 bytes for mailbox signature
vdpa/octeon_ep: Fix PF->VF mailbox data address calculation
vhost_task_create: kill unnecessary .exit_signal initialization
vhost: remove unnecessary module_init/exit functions
vdpa/mlx5: Use kvzalloc_flex() for MTT command memory
vdpa_sim_net: switch to dynamic root device
vdpa_sim_blk: switch to dynamic root device
virtio-mem: Destroy mutex before freeing virtio_mem
virtio-balloon: Destroy mutex before freeing virtio_balloon
tools/virtio: fix build for kmalloc_obj API and missing stubs
virtio_ring: Add READ_ONCE annotations for device-writable fields
vduse: fix compat handling for VDUSE_IOTLB_GET_FD/VDUSE_VQ_GET_INFO
tools/virtio: check mmap return value in vringh_test
vhost/net: complete zerocopy ubufs only once
...
|
|
Pull VFIO updates from Alex Williamson:
- Fix out-of-tree vfio selftest builds with make O= (Jason Gunthorpe)
- Allow vfio selftests to build when ARCH=x86 is used for 64-bit x86
builds (David Matlack)
- Tighten vfio selftest infrastructure with stricter builds, safer path
handling, sysfs helpers, and reusable device/VF-token setup. Build on
that to add the SR-IOV UAPI selftest across supported IOMMU modes
(Raghavendra Rao Ananta)
- Conclude earlier vfio PCI BAR work already taken as v7.1 fixes by
replacing vfio_pci_core_setup_barmap() and direct barmap[] access
with vfio_pci_core_get_iomap(). Fix resulting sparse warnings (Matt
Evans)
- Simplify hisi_acc vfio-pci variant driver device-info reads by using
the mailbox's new direct command-based read helper (Weili Qian)
- Avoid duplicate reset handling in the Xe vfio-pci variant driver
reset-done path (GuoHan Zhao)
- Resolve a lockdep circular dependency splat by tracking active VFs
with a private sriov_active flag rather than calling pci_num_vf()
under memory_lock (Raghavendra Rao Ananta)
- Add CXL DVSEC-based readiness polling for Blackwell-Next in the
nvgrace-gpu vfio-pci variant driver, including interruptible,
lockless waits to support worst case spec defined timeouts (Ankit
Agrawal)
- Prevent vfio_mig_get_next_state() from spinning forever on blocked
migration state transition (Junrui Luo)
- Fix a qat vfio variant driver migration resume race by taking the
migration file lock before boundary checks (Giovanni Cabiddu)
- Add explicit dependencies between vfio selftest output object files
and output directories to ensure directories are always created
(David Matlack)
* tag 'vfio-v7.2-rc1' of https://github.com/awilliam/linux-vfio:
vfio: selftests: Ensure libvfio output dirs are always created
vfio/qat: fix f_pos race in qat_vf_resume_write()
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio/nvgrace-gpu: Add Blackwell-Next GPU readiness check via CXL DVSEC
vfio/pci: Use a private flag to prevent power state change with VFs
vfio/pci: Fix sparse warning in vfio_pci_core_get_iomap()
vfio/xe: avoid duplicate reset in xe_vfio_pci_reset_done
hisi_acc_vfio_pci: simplify the command for reading device information
vfio/pci: Replace vfio_pci_core_setup_barmap() with vfio_pci_core_get_iomap()
vfio: selftests: Add tests to validate SR-IOV UAPI
vfio: selftests: Add helpers to alloc/free vfio_pci_device
vfio: selftests: Add helper to set/override a vf_token
vfio: selftests: Expose more vfio_pci_device functions
vfio: selftests: Extend container/iommufd setup for passing vf_token
vfio: selftests: Introduce a sysfs lib
vfio: selftests: Introduce snprintf_assert()
vfio: selftests: Add -Wall and -Werror to the Makefile
vfio: selftests: Allow builds when ARCH=x86
vfio: selftests: Fix out-of-tree build with make O=
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Fix a recursive deadlock when duplicating executable file rules
Avoid multiple lookups and attempted I_MUTEX_PARENT locks when moving
watched files by passing the already resolved inodes through the
audit code.
- Fix removal of executable watch rules after the file is deleted
Prior to this fix we were unable to remove an executable file watch
where the file had been previously deleted due to a negative dentry
check in the code that performs the lookup on the file watches.
- Convert our basic "unsigned" type usage to "unsigned int".
* tag 'audit-pr-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix recursive locking deadlock in audit_dupe_exe()
audit: fix removal of dangling executable rules
audit: use 'unsigned int' instead of 'unsigned'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm update from Paul Moore:
"A single LSM update the security_inode_listsecurity() hook to be able
to leverage the xattr_list_one() helper function.
We wanted to do this for a while, but we needed to fixup the callers
in the NFS code first. With the NFS code changes shipping in Linux
v7.0 and no one complaining, it seemed a good time to complete the
shift"
* tag 'lsm-pr-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
security,fs,nfs,net: update security_inode_listsecurity() interface
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
"Most of this continues the in-development sub-scheduler support, which
lets a root BPF scheduler delegate to nested sub-schedulers. The
dispatch-path building blocks landed in 7.1. A follow-up patchset in
development will complete enqueue-path support for hierarchical
scheduling. This cycle adds most of that infrastructure:
- Topological CPU IDs (cids): a dense, topology-ordered CPU numbering
where the CPUs of a core, LLC, or NUMA node form contiguous ranges,
so a topology unit becomes a (start, length) slice. Raw CPU numbers
are sparse and don't track topological closeness, which makes them
clumsy for sharding work across sub-schedulers and awkward in BPF.
- cmask: bitmaps windowed over a slice of cid space, so a
sub-scheduler can track, for example, the idle cids of its shard
without a full NR_CPUS cpumask.
- A struct_ops variant that cid-form sub-schedulers register with,
along with the cid-form kfuncs they call.
- BPF arena integration, which sub-scheduler support is built on. The
bpf-next additions let the kernel read and write the BPF
scheduler's arena directly, turning it into a real kernel/BPF
shared-memory channel. Shared state like the per-CPU cmask now
lives there.
- scx_qmap is reworked to exercise the new arena and cid interfaces.
Additionally:
- Exit-dump improvements: dump the faulting CPU first, expose the
exit CPU to BPF and userspace, and normalize the dump header.
- Misc kfuncs and cleanups: a task-ID lookup kfunc, __printf checking
on the error and dump formatters, header reorganization, and
assorted fixes"
* tag 'sched_ext-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (59 commits)
sched_ext: Add scx_arena_to_kaddr() / scx_kaddr_to_arena()
sched_ext: Make scx_bpf_kick_cid() return s32
sched_ext: Add scx_cmask_test() and scx_cmask_for_each_cid()
tools/sched_ext: Order single-cid cmask helpers as (cid, mask)
sched_ext: Order single-cid cmask helpers as (cid, mask)
selftests/sched_ext: Fix dsq_move_to_local check
sched_ext: Guard BPF arena helper calls to fix 32-bit build
sched_ext: idle: Fix errno loss in scx_idle_init()
sched_ext: Convert ops.set_cmask() to arena-resident cmask
sched_ext: Sub-allocator over kernel-claimed BPF arena pages
sched_ext: Require an arena for cid-form schedulers
sched_ext: Add cmask mask ops
sched_ext: Track bits[] storage size in struct scx_cmask
sched_ext: Rename scx_cmask.nr_bits to nr_cids
tools/sched_ext: scx_qmap: Fix qa arena placement
sched_ext: Mark !CONFIG_EXT_SUB_SCHED dummy stubs static inline
sched_ext: Replace tryget_task_struct() with get_task_struct()
sched_ext: Add scx_task_iter_relock() and use it in scx_root_enable_workfn()
sched_ext: Fix ops_cid layout assert
sched_ext: Use offsetofend on both sides of the ops_cid layout assert
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Last cycle deferred css teardown on cgroup removal until the cgroup
depopulated, so a css is not taken offline while tasks can still
reference it. Disabling a controller through cgroup.subtree_control
still had the same problem. This reworks the deferral from per-cgroup
to per-css so that path is covered too.
- New RDMA controller monitoring files: rdma.peak for per-device peak
usage and rdma.events / rdma.events.local for resource-limit
exhaustion. The max-limit parser was rewritten, fixing two input
parsing bugs.
- cpuset: fix a sched-domain leak on the domain-rebuild failure path
and skip a redundant hardwall ancestor scan on v2.
- Misc: pair the remaining lockless cgroup.max.* reads with WRITE_ONCE,
assorted selftest robustness fixes, and doc path corrections.
* tag 'cgroup-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (22 commits)
cgroup: Migrate tasks to the root css when a controller is rebound
docs: cgroup: Fix stale source file paths
cgroup/cpuset: Free sched domains on rebuild guard failure
cgroup: pair max limit READ_ONCE() with WRITE_ONCE()
selftests/cgroup: enable memory controller in hugetlb memcg test
cgroup/rdma: Drop unnecessary READ_ONCE() on event counters
cgroup: Defer kill_css_finish() in cgroup_apply_control_disable()
cgroup: Add per-subsys-css kill_css_finish deferral
cgroup: Move populated counters to cgroup_subsys_state
cgroup: Annotate unlocked nr_populated_* accesses with READ_ONCE/WRITE_ONCE
cgroup: Inline cgroup_has_tasks() in cgroup.h
cgroup/rdma: document rdma.peak, rdma.events and rdma.events.local
cgroup/rdma: add rdma.events.local for per-cgroup allocation failure attribution
cgroup/rdma: add rdma.events to track resource limit exhaustion
cgroup/rdma: add rdma.peak for per-device peak usage tracking
selftests/cgroup: check malloc return value in alloc_anon functions
cgroup/cpuset: Skip hardwall ancestor scan in cpuset v2 in cpuset_current_node_allowed()
selftests/cgroup: fix misleading debug message in test_cgfreezer_time_child
selftests/cgroup: fix child process escaping to parent cleanup in test_cpucg_nice
selftests/cgroup: Add NULL check after malloc in cgroup_util.c
...
|
|
Pull workqueue updates from Tejun Heo:
- Continued progress toward making alloc_workqueue() unbound by
default: more callers converted to WQ_PERCPU / system_percpu_wq /
system_dfl_wq, and new warnings for queues that use neither WQ_PERCPU
nor WQ_UNBOUND or the legacy system_wq / system_unbound_wq.
- Misc: drop the now-trivial apply_wqattrs_lock()/unlock() wrappers,
forbid the TEST_WORKQUEUE benchmark from being built-in, and fix a
spurious pointer level in the worker debug-dump path.
* tag 'wq-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
drm/bridge: anx7625: Add WQ_PERCPU add to alloc_workqueue
wifi: ath6kl: fix invalid workqueue flags in ath6kl_usb_create()
btrfs: Drop WQ_PERCPU from ordered_flags in btrfs_init_workqueues()
workqueue: Add warnings and ensure one among WQ_PERCPU or WQ_UNBOUND is present
workqueue: Add warnings and fallback if system_{unbound}_wq is used
workqueue: drop spurious '*' from print_worker_info() fn declaration
workqueue: forbid TEST_WORKQUEUE from being built-in
workqueue: drop apply_wqattrs_lock()/unlock() wrappers
umh: replace use of system_unbound_wq with system_dfl_wq
rapidio: rio: add WQ_PERCPU to alloc_workqueue users
media: ddbridge: add WQ_PERCPU to alloc_workqueue users
platform: cznic: turris-omnia-mcu: replace use of system_wq with system_percpu_wq
media: synopsys: hdmirx: replace use of system_unbound_wq with system_dfl_wq
virt: acrn: Add WQ_PERCPU to alloc_workqueue users
|
|
Pull bitmap updates from Yury Norov:
"This includes the new FIELD_GET_SIGNED() helper,
bitmap_print_to_pagebuf() removal, RISCV/bitrev support, and a couple
cleanups.
- new handy helper FIELD_GET_SIGNED() (Yury)
- arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy)
- __bf_shf() simplification (Yury)
- bitmap_print_to_pagebuf() removal (Yury)
- RISCV/bitrev conditional support (Jindie, Yury)"
* tag 'bitmap-for-7.2' of https://github.com/norov/linux:
MAINTAINERS: BITOPS: include bitrev.[ch]
arch/riscv: Add bitrev.h file to support rev8 and brev8
bitops: Define generic___bitrev8/16/32 for reuse
lib/bitrev: Introduce GENERIC_BITREVERSE
arch: select HAVE_ARCH_BITREVERSE conditionally on BITREVERSE
bitmap: fix find helper documentation
bitmap: drop bitmap_print_to_pagebuf()
cpumask: switch cpumap_print_to_pagebuf() to using scnprintf()
bitfield: wire __bf_shf to __builtin_ctzll
bitops: use common function parameter names
ptp: switch to using FIELD_GET_SIGNED()
rtc: rv3032: switch to using FIELD_GET_SIGNED()
wifi: rtw89: switch to using FIELD_GET_SIGNED()
iio: mcp9600: switch to using FIELD_GET_SIGNED()
iio: pressure: bmp280: switch to using FIELD_GET_SIGNED()
iio: magnetometer: yas530: switch to using FIELD_GET_SIGNED()
iio: intel_dc_ti_adc: switch to using FIELD_GET_SIGNED()
x86/extable: switch to using FIELD_GET_SIGNED()
bitfield: add FIELD_GET_SIGNED()
|
|
Support for the Motorola EZX phones based on Intel PXA processors was
removed in 2022, but this driver remained present in the tree. As far
as I can tell, the support was never quite functional upstream because
the board files did not actually instantiate the SPI device for the PCAP.
There are still also drivers for the various mfd cells: keys, touchscreen,
regulator and rtc, all of which are obviously orphaned as well but can
be removed separately as the Kconfig dependency now prevents them from
being enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604301209.f1YXTsIr-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Harald Welte <laforge@gnumonks.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260430162855.2029285-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Improve code style. This includes the following:
- Formatting the max77759_chgr_irqs entries to fit in a single line
instead of breaking them into multiple lines to improve readability.
- Refactoring comments such that they're full sentences and have
punctuation marks for a couple of macro definitions to adhere to the
documentation style.
- Explicitly initializing `MAX77759_CHGR_MODE_OFF`.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://patch.msgid.link/20260504-fix-mfd-max77759-driver-v1-1-4d4a31a1d214@google.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The old-style gpio handling in wm8994 came from a commit 7c8844481a1c
("mfd: wm8994: Emulate level triggered interrupts if required") in
linux-3.11, but nothing in the kernel ever set the 'irq_gpio' member
in the wm8994_pdata structure, so this was always dead code.
Remove it now to reduce the dependency on the legacy gpio interfaces.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260427143437.3059210-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There are board files in-tree that want to request GPIOs from this chip.
They currently rely on the GPIO core's mechanism of matching software
nodes' labels against GPIO controller names. We want to remove this
behavior from the kernel and to this end, we need to associate the
referenced GPIO controller with its target software node.
Create a dedicated GPIO software node for cs5535, assign it to the GPIO
cell and expose its address in a new header.
We only expose a single software node instance but that's alright: all
existing hardware only contains a single cs5535 companion and the geode
board file for which we expose this is legacy anyway.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260429-cs5535-swnode-v1-1-2bc5e17ddcf9@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add register definitions and a new 'type' enum to be passed via MFD
private data to support the BQ25792, which is a newer variant of the
BQ257xx family.
BQ25792 shares similar logic of operation with the already supported
BQ25703A but has a completely different register map and different
electrical constraints.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20260331-bq25792-v6-9-0278fba33eb9@flipper.net
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The BD72720 header reserves an ID for BUCK11. While this does not (at
the moment) cause problems I can see, it is misleading as the BD72720
contains only 10 BUCKs.
Make the code clearer and drop the BUCK11 ID.
Fixes: af25277b1ddc ("mfd: rohm-bd71828: Support ROHM BD72720")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/812c3749a18d609d6f4698506bc516ec7183dfdd.1775565298.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
|
|
Some multicolor LEDs support global brightness control in hardware,
meaning that the maximum intensity of the color components is not
connected to the maximum global brightness. Such LEDs cannot be
described properly by the current multicolor LED class interface,
because it assumes that the maximum intensity of each color component
is described by the maximum global brightness of the LED.
Fix this by introducing a new sysfs attribute called
"multi_max_intensity" holding the maximum intensity values for the
color components of a multicolor LED class device. Drivers can use
the new max_intensity field inside struct mc_subled to tell the
multicolor LED class code about those values. Intensity values written
by userspace applications will be limited to this maximum value.
Drivers for multicolor LEDs that do not support global brightness
control in hardware might still want to use the maximum global LED
brightness supplied via devicetree as the maximum intensity of each
individual color component. Such drivers should set max_intensity
to 0 so that the multicolor LED core can act accordingly.
The lp50xx and ncp5623 LED drivers already use hardware-based control
for the global LED brightness. Modify those drivers to correctly
initalize .max_intensity to avoid being limited to the maximum global
brightness supplied via devicetree.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260509214603.262368-2-W_Armin@gmx.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Samsung's S2MU005 PMIC includes subdevices for a charger, an MUIC (Micro
USB Interface Controller), and flash and RGB LED controllers.
S2MU005's interrupt registers divided into three domains, each for the
charger, flash LEDs, and the MUIC, packed into a single regmap IRQ chip
construct.
In devices other than S2MPG1X, the revision can be retrieved from the
first register of the PMIC regmap. In S2MU005 however, the location is
in offset 0x73. Introduce a switch-case block to allow selecting the
REG_ID register. S2MU005 also has a field mask for the revision. Apply
it using FIELD_GET() and get the extracted value.
Add initial support for S2MU005 in the PMIC driver, along with its three
interrupt chips, and support for allowing to fetch revision based on the
device variant.
Co-developed-by: Łukasz Lebiedziński <kernel@lvkasz.us>
Signed-off-by: Łukasz Lebiedziński <kernel@lvkasz.us>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://patch.msgid.link/20260516-s2mu005-pmic-v7-4-73f9702fb461@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Unsurprisingly, we've had a fairly busy development cycle with various
fixes and enhancements. While the majority of changes consist of
device-specific fixes, a significant number of cleanups, hardening,
and modernizations have been applied to the core frameworks as well.
Below are some highlights:
ALSA Core:
- Hardening, race condition, and UAF/leak fixes in the ALSA timer and
sequencer cores
- Widespread adoption of flexible array members across core
structures
- Integration of new simple refcount helper functions to simplify
code
ASoC Core:
- Introduction of a unified SoundWire enumeration helper to clean up
redundant device initialization across codecs
- Enhancements to SDCA support, including handling devices with
multiple functions of the same type and proper jack reporting masks
- Continued refactoring of ASoC component debugfs and DAPM structures
- Simplification and improvements to the format auto-selection
mechanism
- Added shared BCLK rate constraints for cross-DAI coordination
ASoC Platforms & Codecs:
- Initial bring-up and power management support for AMD ACP 7.x
- Support for Everest Semi ES9356 (SDCA), Mediatek MT2701 (on-chip
HDMI) and MT8196 SoCs, Renesas RZ/G3E, SpacemiT K3, and TI
TAC5xx2/TAS67524
- Added a new generic driver for GPIO-driven amplifiers
- Continued mass conversion of locking code to guard() helpers across
numerous platform drivers (MediaTek, Rockchip, STM32, Samsung, etc)
- Cleanup of legacy non-DT platform data and rollbacks for obsolete
SH Ecovec24/7724se boards
HD- and USB-Audio:
- Device-specific hardware quirks and fixes for various Realtek
HD-Audio devices (Lenovo, HP, ASUS, Acer, Clevo)
- Refinements to Qualcomm USB-audio offloading support
- Front-panel controls and autogain status support for Scarlett Gen 4
- Quirks for XIBERIA (K03S), Sennheiser (MOMENTUM 3), Edifier
(MF200), Novation (Mininova), and Behringer (Flow 8) USB-audio
devices
- Improved robustness by rolling back or propagating write errors to
the mixer control caches (Babyface Pro, US-16x08, Scarlett)
Others:
- Support for the HT-Omega eClaro PCI sound card in the Oxygen driver
- Robustness improvements and fixes for Virtio-audio, Xen-front, and
legacy OSS dmasound drivers"
* tag 'sound-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (483 commits)
ALSA: usb-audio: Add iface reset and delay quirk for XIBERIA K03S
ALSA: hda/realtek: Add quirk for Lenovo Xiaoxin 14 GT
ALSA: hda/realtek: Add CS35L41 I2C quirk for ASUS UM3405GA
ALSA: timer: Fix racy timeri->timer changes with rwlock
ALSA: core: Fix unintuitive behavior of snd_power_ref_and_wait()
ALSA: seq: avoid stale FIFO cells during resize
ALSA: seq: oss: Serialize readq reset state with q->lock
ASoC: dt-bindings: Fix RT5677 "realtek,gpio-config" type
ASoC: audio-graph-card2: recommend to use auto select DAI format
ASoC: update auto format selection method
ASoC: renesas: rcar: update auto select format
ASoC: codecs: pcm3168a: update auto select format
ASoC: codecs: ak4619: update auto select format
ASoC: codecs: peb2466: don't use array if single pattern
ASoC: codecs: idt821034: don't use array if single pattern
ASoC: codecs: framer-codec: don't use array if single pattern
ASoC: remove SND_SOC_POSSIBLE_xBx_xFx
ASoC: adau1372: Clear PLL_EN on failed PLL lock without reset GPIO
ALSA: seq: Don't re-bounce the error event
ASoC: bcm: cygnus: use scoped child node loop
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- xe: add initial CRI platform support
- amdgpu: initial HDMI 2.1 FRL support
- rust: add some new type concepts for device lifetimes
- scheduler: moves to a fair algorithm and lots of cleanups
But it's mostly the usual mountain of changes across the board.
core:
- add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD
- change signature of drm_connector_attach_hdr_output_metadata_property
- dedup counter and timestamp retrieval in vblank code
- parse AMD VSDB v3 in CTA extension blocks
- add P230, Y7, XYYY2101010, T430, XVUY210101010 formats
- don't call drop master on file close if not master
- use drm_printf_indent in atomic / bridge
- fix 32b format descriptions
- docs: fix toctree
- hdmi: add common TMDS character rates
- fix drm_syncobj_find_fence leak
rust:
- introduce Higher-Ranked lifetime types
- replace drvdata with scoped registration data
- add GPUVM immediate mode abstraction for rust GPU drivers
- introduce DeviceContext type state for drm::Device
bridge:
- clarify drm_bridge_get/put
- create drm_get_bridge_by_endpoint and use it
- analogix_dp: add panel probing
- ite-it6211 - use drm audio hdmi helpers
buddy:
- add lockdep annotations
dp:
- add PR and VRR updates
- mst: fix buffer overflows
- add Adaptive Sync SDP decoding support
- fix OOB reads in dp-mst
ttm:
- bump fpfn/lpfn to 64-bit
scheduler:
- change default to fair scheduler
- map runqueue 1:1 with scheduler
dma-buf:
- port selftests to kunit
- convert dma-buf system/heap allocators to module
- add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig
udmabuf:
- revert hugetlb support
- fix error with CONFIG_DMA_API_DEBUG
dma-fence:
- fix tracepoints lifetime
- remove unused signal on any support
ras:
- add clear error counter netlink command to drm ras
gpusvm:
- reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- use IOVA allocations
pagemap:
- use IOVA allocations
panels:
- update to use ref counts
- add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1
- add support for waveshare panels
- CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5,
- IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F,
- AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels
- Surface Pro 12 Panel
xe:
- add CRI PCI-IDs
- debugfs add multi-lrc info
- engine init cleanup
- PF fair scheduling auto provisioning
- system controller support for CRI/Xe3p
- PXP state machine fixes
- Reset/wedge/unload corner case fixes
- Wedge path memory allocation fixes
- PAT type cleanups
- Reject unsafe PAT for CPU cached memory
- OA improvements for CRI device memory
- kernel doc syntax in xe headers
- xe_drm.h documentation fixes
- include guard cleanups
- VF CCS memory pool
- i915/xe step unification
- Xe3p GT tuning fixes
- forcewake cleanup in GT and GuC
- admin-only PF mode
- enable hwmon energy attributes for CRI
- enable GT_MI_USER_INTERRUPT
- refactor emit functions
- oa workarounds
- multi_queue: allow QUEUE_TIMESTAMP register
- convert stolen memory to ttm range manager
- use xe2 style blitter as a feature flag
- make drm_driver const
- add/use IRQ page to HW engine definition
- fix oops when display disabled
i915:
- enable PIPEDMC_ERROR interrupt
- more common display code refactoring
- restructure DP/HDMI sink format handling
- eliminate FB usage from lowlevel pinning code
- panel replay bw optimization
- integrate sharpness filter into the scaler
- new fb_pin abstraction for xe/i915 fb transparent handling
- skip inactive MST connectors on HDCP
- start switching to display specific registers
- use polling when irq unavailable
- Adaptive-sync SDP prep
amdgpu:
- use drm_display_info for AMD VSDB data
- Initial HDMI 2.1 FRL support
- Initial DCN 4.2.1 support
- GART fixes for non-4k pages
- GC 11.5.6/SDMA 6.4.0/and other new IPs
- GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes
- Finish support for using multiple SDMA queues for TTM operations
- SWSMU updates
- GC 12.1 updates
- SMU 15.0.8 updates
- DCN 4.2 updates
- DC type conversion fixes
- Enable DC power module
- Replay/PSR updates
- SMU 13.x updates
- Compute queue quantum MQD updates
- ASPM fix
- Align VKMS with common implementation
- DC analog support fixes
- UVD 3 fixes
- TCC harvesting fixes for SI
- GC 11 APU module reload fix
- NBIO 6.3.2 support
- IH 7.1 updates
- DC cursor fixes
- VCN/JPEG user fence fixes
- DC support for connectors without DDC
- Prefer ROM BAR for default VGA device
- DC bandwidth fixes
- Add PTL support for profiler
- Introduce dc_plane_cm and migrate surface update color path
- Add FRL registers for HDMI 2.1
- Restructure VM state machine
- Auxless ALPM support
- GEM_OP locking/warning fixes
- switch to system_dfl_wq
amdkfd:
- GPUVM TLB flush fix
- Hotplug fix
- Boundary check fixes
- SVM fixes
- CRIU fixes
- add profiler API
- MES 12.1 updates
msm:
- core:
- fix shrinker documentation
- IFPC enabled for gen8
- PERFCNTR_CONFIG ioctl support
- GPU:
- reworked UBWC handling
- a810 support
- MDSS:
- add support for Milos platform
- reworked UBWC handling
- DisplayPort:
- reworked HPD handling as prep for MST
- DPU:
- Milos platform support
- reworked UBWC handling
- DSI:
- Milos platform support
nova:
- Hopper/Blackwell enablement (GH100/GB100/GB202)
- FSP support
- 32-bit firmware support
- HAL functions
- refactor GSP boot/unload
- GA100 support
- VBIOS hardening/refactoring
- Adopt higher order lifetime types
tyr:
- define register blocks
- add shmem backed GEM objects
- adopt higher order lifetime types
- move clock cleanup into Drop
radeon:
- Hawaii SMU fixes
- CS parser fix
- use struct drm_edid instead of edid
amdxdna:
- export per-client BO memory via fdinfo
- AIE4 device support
- support medium/lower power modes
- expandable device heap support
- revert read-only user-pointer BO mappings
ivpu:
- support frequency limiting
panthor:
- enable GEM shrinker support
- add eviction and reclaim info to fdinfo
v3d:
- enable runtime PM
mgag200:
- support XRGB1555 + C8
ast:
- support XRGB1555 + C8
- use constants for lots of registers
- fix register handling
imagination:
- fence handling refactoring
nouveau:
- fix sched double call
- expose VBIOS on GSP-RM systems
- add GA100 support
virtio:
- add VIRTIO_GPU_F_BLOB_ALIGNMENT flag
- add deferred mapping support
gud:
- add RCade Display Adapter
hibmc:
- fix no connectors usage
mediatek:
- hdmi: convert error handling
- simplify mtk_crtc allocation
exynos:
- move fbdev emulation to drm client buffers
- use drm format helpers for geometry/size
- adopt core DMA tracking
- fix framebuffer offset handling
renesas:
- add RZ/T2H SOC support
versilicon:
- add cursor plane support
tegra:
- use drm client for framebuffer"
* tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits)
dma-buf: move system_cc_shared heap under separate Kconfig
accel/amdxdna: Clear sva pointer after unbind
agp/amd64: Fix broken error propagation in agp_amd64_probe()
accel/amdxdna: Require carveout when PASID and force_iova are disabled
drm/amdkfd: always resume_all after suspend_all
drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
drm/amd/pm: Use strscpy in profile mode parsing
drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length
drm/amdkfd: fix sysfs topology prop length on buffer truncation
drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages
drm/amd/pm: bound OD parameter parsing to stack array size
drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
drm/amdgpu: validate the mes firmware version for gfx12.1
drm/amdgpu: validate the mes firmware version for gfx12
drm/amdgpu: compare MES firmware version ucode for gfx11
drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS
drm/amdgpu: restart the CS if some parts of the VM are still invalidated
drm/amd/display: use unsigned types for local pipe and REG_GET counters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
|
Add the __counted_by_ptr() compiler attribute to ->aliases to improve
bounds checking via CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260611215501.464405-3-thorsten.blum@linux.dev
|
|
Merge in late fixes in preparation for the net-next PR.
Conflicts:
net/tls/tls_sw.c
406e8a651a7b ("net: skmsg: preserve sg.copy across SG transforms")
79511603a65b ("tls: remove dead sockmap (psock) handling from the SW path")
drivers/net/ethernet/microsoft/mana/mana_en.c
f8fd56977eeea ("net: mana: guard TX wq object destroy with INVALID_MANA_HANDLE check")
d07efe5a6e641 ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
https://lore.kernel.org/ajAPXu-C_PuTgV-a@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sk_msg sg.copy bitmap is part of the scatterlist entry ownership
state. A set bit tells sk_msg_compute_data_pointers() not to expose the
entry through writable BPF ctx->data. This protects entries backed by
pages that are not private to the sk_msg, such as splice-backed file
page-cache pages.
Several sk_msg transform paths move, copy, split, or compact
msg->sg.data[] entries without moving the matching sg.copy bit. This can
make an externally backed entry arrive at a new slot with a clear copy
bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable
ctx->data and BPF stores can modify the original page cache.
Keep sg.copy synchronized with sg.data[] whenever entries are
transferred, shifted, split, or copied into a new sk_msg. Clear the bit
when an entry is replaced by a newly allocated private page or freed.
This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(),
sk_msg_xfer(), and tls_split_open_record(), including the partial tail
entry created during TLS open-record splitting.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Cc: stable@vger.kernel.org
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Yiming Qian <yimingqian591@gmail.com>
Link: https://patch.msgid.link/20260610062137.49075-1-yimingqian591@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AppleTalk has been removed in MacOS X 10.6 (Snow Leopard), in 2009,
according to Wikipedia. We recently got a burst of AI generated
fixes to this protocol which nobody is reviewing.
Let AppleTalk follow AX.25 and hamradio out of the Linux tree.
We we will maintain the code at: github.com/linux-netdev/mod-orphan
for anyone interested in playing with it.
Retain the uAPI for now. No strong reason, simply because I suspect
keeping it will be less controversial.
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260615222935.947233-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AppleTalk keeps its per-interface control block (struct atalk_iface)
directly in struct netdevice (dev->atalk_ptr). This is the only thing
tying the protocol into the core net_device layout and is the sole
blocker to moving AppleTalk out of tree.
Replace dev->atalk_ptr with a small ifindex-keyed hashtable internal
to ddp.c. The existing atalk_interfaces list stays the owner of the iface
objects; the hashtable is purely a fast dev->iface index and reuses
the same atalk_interfaces_lock.
AFAICT this patch does not make this code any more racy than it already
is, I'm sure Sashiko will point out some basically existing bugs.
AFAICT atalk_interfaces_lock is the innermost lock already.
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260615222935.947233-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use unsigned int for dev_nack_retry_count across the core and
controller drivers to match the type of master->dev_nack_retry_count.
Update the sysfs store path to use kstrtouint() and adjust the
->set_dev_nack_retry() callback prototype and callers accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260616113752.196140-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
blk_time_get_ns() caches ktime_get_ns() in current->plug->cur_ktime
and marks the task with PF_BLOCK_TS. That cache is only valid while the
task keeps running; if the task is switched out, wall-clock time
advances and the cached value must not be reused when the task runs again.
The existing invalidation covers explicit plug flushes through
__blk_flush_plug(), and the schedule() / rtmutex paths through
sched_update_worker(). It does not cover in-kernel preemption paths such
as preempt_schedule(), preempt_schedule_notrace(), and
preempt_schedule_irq(), which enter __schedule(SM_PREEMPT) directly and
return without calling sched_update_worker().
As a result, a task preempted while holding a plug with PF_BLOCK_TS set
can reuse a stale plug->cur_ktime after it is scheduled back in. blk-iocost
then consumes that stale timestamp through ioc_now(), producing stale vnow
values for throttle decisions, and through ioc_rqos_done(), inflating
on-queue time and feeding false missed-QoS samples into vrate
adjustment.
Move the schedule-side invalidation to finish_task_switch(), which runs
for the scheduled-in task after every actual context switch regardless
of which schedule entry point was used. Keep __blk_flush_plug() as the
explicit flush/finish-plug invalidation path, and remove only the
PF_BLOCK_TS handling from sched_update_worker().
Fixes: 06b23f92af87 ("block: update cached timestamp post schedule/preemption")
Cc: stable@vger.kernel.org
Signed-off-by: Usama Arif <usama.arif@linux.dev>
Link: https://patch.msgid.link/20260616141604.328820-3-usama.arif@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
TLS and sockmap are now mutually exclusive. Try to delete the code
from sendmsg and recvmsg path which is now obviously dead.
The main goal is to delete enough code for AI security scanners
to no longer bother us with sockmap related bugs. At the same
time retain the code in case someone has the cycles to fix
all of this and make the integration work, again.
If the integration does not get restored we can wipe the rest
of the skmsg code from TLS in two or three releases.
The changes on the Tx side are deeper since that's where most
of the bugs are, Rx side simply takes the data from sockmap
and gives it to the user. On Tx split record handling and
rolling back the iterator were the two problem areas.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260614014102.461064-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ATM removals have left a number of uAPI headers and ioctl
definitions with no in-kernel implementation behind them:
- device headers for adapters deleted with the legacy PCI/SBUS drivers:
atm_eni.h, atm_he.h, atm_idt77105.h, atm_nicstar.h, atm_zatm.h and
the atmtcp pair atm_tcp.h / <linux/atm_tcp.h>
- protocol headers for the removed CLIP, LANE and MPOA stacks:
atmarp.h, atmclip.h, atmlec.h, atmmpc.h
- atmsvc.h and the SVC / p2mp / local-address ioctls in atmdev.h
(ATM_{GET,RST,ADD,DEL}ADDR, ATM_{ADD,DEL,GET}LECSADDR,
ATM_{ADD,DROP}PARTY) left behind by the SVC and address-registry
removals
None of these are referenced by any remaining in-tree code.
Let's try to delete all this. Chances are nobody cares about
these headers any more. I'm keeping this separate from the
kernel side code changes for ease of revert, in case I am
proven wrong...
Link: https://patch.msgid.link/20260615194416.752559-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
