| Age | Commit message (Collapse) | Author |
|---|
|
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unplug frees the instance of struct fb_info. Accessing the memory will
operate on undefined state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 60b59beafba8 ("fbdev: mm: Deferred IO support")
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v2.6.22+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add a managed API, devm_of_dma_controller_register(), to simplify DMA
engine controller registration by automatically handling resource
cleanup.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260225-mxsdma-module-v3-1-8f798b13baa6@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Introducing CS42L43B codec, a variant of CS42L43 which can be driven by
the same driver.
Changes in CS42L43 driver specific for CS42L43B:
- Decimator 1 and 2 are dedicated to ADC, can't be selected for PDM
- Decimators 3 and 4 are connected to PDM1
- Added Decimator 5 and 6 for PDM2
- Supports SoundWire Clock Gearing
- Updated ROM requiring no patching
- Reduced RAM space
- Each ISRC has 4 decimators now
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260306152829.3130530-4-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Christoph says, in response to one of the patches in the i_ino widening
series, which changes the prototype of several functions in fs.h:
"Can you please drop all these pointless externs while you're at it?"
Remove extern keyword from functions touched by that patch (and a few
that happened to be nearby). Also add missing argument names to
declarations that lacked them.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260307-iino-u64-v2-1-a1a1696e0653@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git into gpio/for-next
Immutable branch between GPIO and net
Convert remaining users of of_gpio.h to using GPIO descriptors and
remove the header.
|
|
All in-tree consumers have been converted to the descriptor-based API.
Remove the deprecated of_get_named_gpio() helper, delete the
<linux/of_gpio.h> header, and drop the corresponding entry from
MAINTAINERS.
Also remove the completed TODO item for this cleanup.
Signed-off-by: Jialu Xu <xujialu@vimux.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/02ABDA1F9E3FAF1F+20260307030623.3495092-6-xujialu@vimux.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
With everything else now in place, we can convert the remaining parts of
the reset subsystem to becoming fwnode-agnostic - meaning it will work
with all kinds of firmware nodes, not only devicetree.
To that end: extend struct reset_controller_dev with fields taking
information relevant for using firmware nodes (which mirrors what we
already do for OF-nodes) and limit using of_ APIs only to where it's
absolutely necessary (mostly around the of_xlate callback).
For backward compatibility of existing drivers we still support OF-nodes
but firmware nodes become the preferred method.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
In order to simplify the commit converting the internals of reset core
to using firmware nodes, first convert the user-facing API. Modify the
signature of the core consumer functions but leave the specialized
wrappers as is to avoid modifying users for now.
No functional change intended.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Currently we use a single, global mutex - misleadingly names
reset_list_mutex - to protect the global list of reset devices,
per-controller list of reset control handles and also internal fields of
struct reset_control. Locking can be made a lot more fine-grained if we
use a separate mutex for serializing operations on the list AND
accessing the reset controller device.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The of_args field of struct reset_controller_dev was introduced to allow
the reset-gpio driver to pass the phandle arguments back to reset core.
The thing is: it doesn't even have to do it. The core sets the platform
data of the auxiliary device *AND* has access to it later on during the
lookup. This means the field is unneeded and all can happen entirely in
reset core.
Remove the field from the public header and don't set it in
reset-gpio.c. Retrieve the platform data in reset core when needed
instead.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
It is not clearly documented that the GPIO driver API expect the
driver to get/set the physical level of the GPIO line and the
consumer API will get/set the logic level. Document this in
relevant places.
Reported-by: David Jander <david@protonic.nl>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260306-gpio-doc-levels-v1-1-19928739e400@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
These three function are now only used in namei.c, so they don't need to
be exported.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260224222542.3458677-16-neilb@ownmail.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add missing enum descriptions and spell one struct member correctly
to avoid kernel-doc warnings:
Warning: include/linux/dma/qcom-gpi-dma.h:15 Enum value 'SPI_TX' not
described in enum 'spi_transfer_cmd'
Warning: include/linux/dma/qcom-gpi-dma.h:15 Enum value 'SPI_RX' not
described in enum 'spi_transfer_cmd'
Warning: include/linux/dma/qcom-gpi-dma.h:15 Enum value 'SPI_DUPLEX' not
described in enum 'spi_transfer_cmd'
Warning: include/linux/dma/qcom-gpi-dma.h:80 struct member 'multi_msg' not
described in 'gpi_i2c_config'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260301011203.3062658-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add missing struct member, function parameter, and enum value descriptions.
Add missing function Returns: sections.
Use correct function name in kernel-doc to avoid mismatched prototypes.
These repair all kernel-doc warnings in ti-cppi5.h:
Warning: include/linux/dma/ti-cppi5.h:27 struct member 'pkt_info1' not
described in 'cppi5_desc_hdr_t'
Warning: include/linux/dma/ti-cppi5.h:27 struct member 'pkt_info2' not
described in 'cppi5_desc_hdr_t'
Warning: include/linux/dma/ti-cppi5.h:50 struct member 'epib' not
described in 'cppi5_host_desc_t'
Warning: include/linux/dma/ti-cppi5.h:142 struct member 'epib' not
described in 'cppi5_monolithic_desc_t'
Warning: include/linux/dma/ti-cppi5.h:413 function parameter 'pkt_len'
not described in 'cppi5_hdesc_set_pktlen'
Warning: include/linux/dma/ti-cppi5.h:436 function parameter 'ps_flags'
not described in 'cppi5_hdesc_set_psflags'
Warning: include/linux/dma/ti-cppi5.h:509 function parameter 'hbuf_desc'
not described in 'cppi5_hdesc_link_hbdesc'
Warning: include/linux/dma/ti-cppi5.h:839 struct member 'dicnt3' not
described in 'cppi5_tr_type15_t'
Warning: include/linux/dma/ti-cppi5.h:970 function parameter 'desc_hdr'
not described in 'cppi5_trdesc_init'
Warning: include/linux/dma/ti-cppi5.h:184 No description found for
return value of 'cppi5_desc_is_tdcm'
Warning: include/linux/dma/ti-cppi5.h:198 No description found for
return value of 'cppi5_desc_get_type'
Warning: include/linux/dma/ti-cppi5.h:210 No description found for
return value of 'cppi5_desc_get_errflags'
Warning: include/linux/dma/ti-cppi5.h:448 expecting prototype for
cppi5_hdesc_get_errflags(). Prototype was for cppi5_hdesc_get_pkttype()
instead
Warning: include/linux/dma/ti-cppi5.h:460 expecting prototype for
cppi5_hdesc_get_errflags(). Prototype was for cppi5_hdesc_set_pkttype()
instead
Warning: include/linux/dma/ti-cppi5.h:1053 expecting prototype for
cppi5_tr_cflag_set(). Prototype was for cppi5_tr_csf_set() instead
Warning: include/linux/dma/ti-cppi5.h:651 Enum value 'CPPI5_TR_TYPE_MAX'
not described in enum 'cppi5_tr_types'
Warning: include/linux/dma/ti-cppi5.h:676 Enum value
'CPPI5_TR_EVENT_SIZE_MAX' not described in enum 'cppi5_tr_event_size'
Warning: include/linux/dma/ti-cppi5.h:693 Enum value 'CPPI5_TR_TRIGGER_MAX'
not described in enum 'cppi5_tr_trigger'
Warning: include/linux/dma/ti-cppi5.h:714 Enum value
'CPPI5_TR_TRIGGER_TYPE_MAX' not described in enum 'cppi5_tr_trigger_type'
Warning: include/linux/dma/ti-cppi5.h:890 Enum value
'CPPI5_TR_RESPONSE_STATUS_MAX' not described in enum
'cppi5_tr_resp_status_type'
Warning: include/linux/dma/ti-cppi5.h:906 Enum value
'CPPI5_TR_RESPONSE_STATUS_SUBMISSION_MAX' not described in enum
'cppi5_tr_resp_status_submission'
Warning: include/linux/dma/ti-cppi5.h:934 Enum value
'CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_MAX' not described in enum
'cppi5_tr_resp_status_unsupported'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260301011213.3063688-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document that the DMA_PREP_REPEAT flag can be used with the
dmaengine_prep_peripheral_dma_vec() to mark a transfer as cyclic similar
to dmaengine_prep_dma_cyclic().
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260303-axi-dac-cyclic-support-v2-1-0db27b4be95a@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Large alignment requests previously forced the buddy allocator to search by
alignment order, which often caused higher-order free blocks to be split even
when a suitably aligned smaller region already existed within them. This led
to excessive fragmentation, especially for workloads requesting small sizes
with large alignment constraints.
This change prioritizes the requested allocation size during the search and
uses an augmented RB-tree field (subtree_max_alignment) to efficiently locate
free blocks that satisfy both size and offset-alignment requirements. As a
result, the allocator can directly select an aligned sub-region without
splitting larger blocks unnecessarily.
A practical example is the VKCTS test
dEQP-VK.memory.allocation.basic.size_8KiB.reverse.count_4000, which repeatedly
allocates 8 KiB buffers with a 256 KiB alignment. Previously, such allocations
caused large blocks to be split aggressively, despite smaller aligned regions
being sufficient. With this change, those aligned regions are reused directly,
significantly reducing fragmentation.
This improvement is visible in the amdgpu VRAM buddy allocator state
(/sys/kernel/debug/dri/1/amdgpu_vram_mm). After the change, higher-order blocks
are preserved and the number of low-order fragments is substantially reduced.
Before:
order- 5 free: 1936 MiB, blocks: 15490
order- 4 free: 967 MiB, blocks: 15486
order- 3 free: 483 MiB, blocks: 15485
order- 2 free: 241 MiB, blocks: 15486
order- 1 free: 241 MiB, blocks: 30948
After:
order- 5 free: 493 MiB, blocks: 3941
order- 4 free: 246 MiB, blocks: 3943
order- 3 free: 123 MiB, blocks: 4101
order- 2 free: 61 MiB, blocks: 4101
order- 1 free: 61 MiB, blocks: 8018
By avoiding unnecessary splits, this change improves allocator efficiency and
helps maintain larger contiguous free regions under heavy offset-aligned
allocation workloads.
v2:(Matthew)
- Update augmented information along the path to the inserted node.
v3:
- Move the patch to gpu/buddy.c file.
v4:(Matthew)
- Use the helper instead of calling _ffs directly
- Remove gpu_buddy_block_order(block) >= order check and drop order
- Drop !node check as all callers handle this already
- Return larger than any other possible alignment for __ffs64(0)
- Replace __ffs with __ffs64
v5:(Matthew)
- Drop subtree_max_alignment initialization at gpu_block_alloc()
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260306060155.2114-1-Arunpravin.PaneerSelvam@amd.com
|
|
For current platforms(ACP6.3/ACP7.0/ACP7.1/ACP7.2), AMD SoundWire manager
doesn't have banked registers for data port programming on Manager's side.
Need to use fixed block offsets, hstart & hstop for manager ports.
Earlier amd manager driver has support for 12 MHz as a bus clock frequency
where frame rate is 48000 and number of bits is 500, frame shape as
50 x 10 with fixed block offset mapping based on port number.
Got a new requirement to support 6 MHz as a bus clock frequency.
For 6 MHz bus clock frequency amd manager driver needs to support two
different frame shapes i.e number of bits as 250 with frame rate as 48000
and frame shape as 125 x 2 and for the second combination number of bits as
500 where frame rate is 24000 and frame shape is 50 x 10.
Few SoundWire peripherals doesn't support 125 x 2 as a frame shape for
6 MHz bus clock frequency. They have explicit requirement for the frame
shape. In this scenario, amd manager driver needs to use 50 x 10 as a frame
shape where frame rate is 24000. Based on the platform and SoundWire
topology for 6Mhz support frame shape will be decided which is part of
SoundWire manager DisCo tables.
For current platforms, amd manager driver supports only two bus clock
frequencies(12 MHz & 6 MHz). Refactor bandwidth logic to support different
bus clock frequencies.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260226065638.1251771-3-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clients sometimes need to know whether the mailbox TX queue has room
before posting a new message. Rather than exposing internal queue state
through a struct field, provide a proper accessor function that returns
the number of available slots for a given channel.
This lets clients choose to back off when the queue is full instead of
hitting the -ENOBUFS error path and the misleading "Try increasing
MBOX_TX_QUEUE_LEN" warning.
Tested-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add compiler context analysis annotations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260306101417.GT1282955@noisy.programming.kicks-ass.net
|
|
Add compiler context analysis annotations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121111213.851599178@infradead.org
|
|
Add compiler context analysis annotations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121111213.745353747@infradead.org
|
|
Useful for things like unlock fastpaths, which on success release the
lock.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260121111213.634625032@infradead.org
|
|
Instead of embedding a list_head in struct mutex, store a pointer to
the first waiter. The list of waiters remains a doubly linked list so
we can efficiently add to the tail of the list, remove from the front
(or middle) of the list.
Some of the list manipulation becomes more complicated, but it's a
reasonable tradeoff on the slow paths to shrink data structures which
embed a mutex like struct file.
Some of the debug checks have to be deleted because there's no equivalent
to checking them in the new scheme (eg an empty waiter->list now means
that it is the only waiter, not that the waiter is no longer on the list).
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260305195545.3707590-4-willy@infradead.org
|
|
Instead of embedding a list_head in struct semaphore, store a pointer to
the first waiter. The list of waiters remains a doubly linked list so
we can efficiently add to the tail of the list and remove from the front
(or middle) of the list.
Some of the list manipulation becomes more complicated, but it's a
reasonable tradeoff on the slow paths to shrink data structures
which embed a semaphore.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260305195545.3707590-3-willy@infradead.org
|
|
Instead of embedding a list_head in struct rw_semaphore, store a pointer
to the first waiter. The list of waiters remains a doubly linked list
so we can efficiently add to the tail of the list, remove from the front
(or middle) of the list.
Some of the list manipulation becomes more complicated, but it's a
reasonable tradeoff on the slow paths to shrink some core data structures
like struct inode.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260305195545.3707590-2-willy@infradead.org
|
|
Saves two function calls, and one stac/clac pair.
stac/clac is rather expensive on older cpus like Zen 2.
A synthetic network stress test gives a ~1.5% increase of pps
on AMD Zen 2.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fix from Danilo Krummrich:
- Revert "driver core: enforce device_lock for driver_match_device()":
When a device is already present in the system and a driver is
registered on the same bus, we iterate over all devices registered on
this bus to see if one of them matches. If we come across an already
bound one where the corresponding driver crashed while holding the
device lock (e.g. in probe()) we can't make any progress anymore.
Thus, revert and clarify that an implementer of struct bus_type must
not expect match() to be called with the device lock held.
* tag 'driver-core-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Revert "driver core: enforce device_lock for driver_match_device()"
|
|
SCX_ENQ_REENQ indicates that a task is being re-enqueued but doesn't tell the
BPF scheduler why. Add SCX_TASK_REENQ_REASON flags using bits 12-13 of
p->scx.flags to communicate the reason during ops.enqueue():
- NONE: Not being reenqueued
- KFUNC: Reenqueued by scx_bpf_dsq_reenq() and friends
More reasons will be added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Task states (NONE, INIT, READY, ENABLED) were defined in a separate enum with
unshifted values and then shifted when stored in scx_entity.flags. Simplify by
defining them as pre-shifted values directly in scx_ent_flags and removing the
separate scx_task_state enum. This removes the need for shifting when
reading/writing state values.
scx_get_task_state() now returns the masked flags value directly.
scx_set_task_state() accepts the pre-shifted state value. scx_dump_task()
shifts down for display to maintain readable output.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_bpf_dsq_reenq() currently only supports local DSQs. Extend it to support
user-defined DSQs by adding a deferred re-enqueue mechanism similar to the
local DSQ handling.
Add per-cpu deferred_reenq_user_node/flags to scx_dsq_pcpu and
deferred_reenq_users list to scx_rq. When scx_bpf_dsq_reenq() is called on a
user DSQ, the DSQ's per-cpu node is added to the current rq's deferred list.
process_deferred_reenq_users() then iterates the DSQ using the cursor helpers
and re-enqueues each task.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Factor out cursor-based DSQ iteration from bpf_iter_scx_dsq_next() into
nldsq_cursor_next_task() and the task-lost check from scx_dsq_move() into
nldsq_cursor_lost_task() to prepare for reuse.
As ->priv is only used to record dsq->seq for cursors, update
INIT_DSQ_LIST_CURSOR() to take the DSQ pointer and set ->priv from dsq->seq
so that users don't have to read it manually. Move scx_dsq_iter_flags enum
earlier so nldsq_cursor_next_task() can use SCX_DSQ_ITER_REV.
bypass_lb_cpu() now sets cursor.priv to dsq->seq but doesn't use it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Add per-CPU data structure to dispatch queues. Each DSQ now has a percpu
scx_dsq_pcpu which contains a back-pointer to the DSQ. This will be used by
future changes to implement per-CPU reenqueue tracking for user DSQs.
init_dsq() now allocates the percpu data and can fail, so it returns an
error code. All callers are updated to handle failures. exit_dsq() is added
to free the percpu data and is called from all DSQ cleanup paths.
In scx_bpf_create_dsq(), init_dsq() is called before rcu_read_lock() since
alloc_percpu() requires GFP_KERNEL context, and dsq->sched is set
afterwards.
v2: Fix err_free_pcpu to only exit_dsq() initialized bypass DSQs (Andrea
Righi).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The else-if and else branches in rht_key_get_hash() both compute a hash
using either params.hashfn or jhash, differing only in the source of
key_len (params.key_len vs ht->p.key_len). Merge the two branches into
one by using the ternary `params.key_len ?: ht->p.key_len` to select
the key length, removing the duplicated logic.
This also improves the performance of the else branch which previously
always used jhash and never fell through to jhash2. This branch is going
to be used by BPF resizable hashmap, which wraps rhashtable:
https://lore.kernel.org/bpf/20260205-rhash-v1-0-30dd6d63c462@meta.com/
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
378e6523ebb1 ("net: bcmgenet: remove unused platform code") removed
the last user of phy_attach(). So remove this function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/8812176a-e319-4e9f-815d-99ea339df8b2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu")
capped net->max_mtu to the device's hard_mtu in usbnet_probe(). While
this correctly prevents oversized packets on standard USB network
devices, it breaks the qmi_wwan driver.
qmi_wwan relies on userspace (e.g. ModemManager) setting a large MTU on
the wwan0 interface to configure rx_urb_size via usbnet_change_mtu().
QMI modems negotiate USB transfer sizes of 16,383 or 32,767 bytes, and
the USB receive buffers must be sized accordingly. With max_mtu capped
to hard_mtu (~1500 bytes), userspace can no longer raise the MTU, the
receive buffers remain small, and download speeds drop from >300 Mbps
to ~0.8 Mbps.
Introduce a FLAG_NOMAXMTU driver flag that allows individual usbnet
drivers to opt out of the max_mtu cap. Set this flag in qmi_wwan's
driver_info structures to restore the previous behavior for QMI devices,
while keeping the safety fix in place for all other usbnet drivers.
Fixes: c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/CAPh3n803k8JcBPV5qEzUB-oKzWkAs-D5CU7z=Vd_nLRCr5ZqQg@mail.gmail.com/
Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Tested-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://patch.msgid.link/20260304134338.1785002-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PCS and PHY masks are passed to the mdio bus layer as phy_mask
to prevent bus addresses between 0 and 31 inclusive being scanned,
and this is declared as u32. Also declare these as u32 in stmmac
for type consistency.
Since this is a u32, use BIT_U32() rather than BIT() to generate
values for these fields.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vy6AY-0000000BtxJ-3smT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
default_an_inband is declared as an unsigned int, but is set to true/
false and is assigned to phylink_config's member of the same name
which is a bool. Declare this also as a bool for consistency.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vy6AT-0000000BtxD-2qm7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes pull.
There is one mm fix in here for a HMM livelock triggered by the xe
driver tests. Otherwise it's a pretty wide range of fixes across the
board, ttm UAF regression fix, amdgpu fixes, nouveau doesn't crash my
laptop anymore fix, and a fair bit of misc.
Seems about right for rc3.
mm:
- mm: Fix a hmm_range_fault() livelock / starvation problem
pagemap:
- Revert "drm/pagemap: Disable device-to-device migration"
ttm:
- fix function return breaking reclaim
- fix build failure on PREEMPT_RT
- fix bo->resource UAF
dma-buf:
- include ioctl.h in uapi header
sched:
- fix kernel doc warning
amdgpu:
- LUT fixes
- VCN5 fix
- Dispclk fix
- SMU 13.x fix
- Fix race in VM acquire
- PSP 15.x fix
- UserQ fix
amdxdna:
- fix invalid payload for failed command
- fix NULL ptr dereference
- fix major fw version check
- avoid inconsistent fw state on error
i915/display:
- Fix for Lenovo T14 G7 display not refreshing
xe:
- Do not preempt fence signaling CS instructions
- Some leak and finalization fixes
- Workaround fix
nouveau:
- avoid runtime suspend oops when using dp aux
panthor:
- fix gem_sync argument ordering
solomon:
- fix incorrect display output
renesas:
- fix DSI divider programming
ethosu:
- fix job submit error clean-up refcount
- fix NPU_OP_ELEMENTWISE validation
- handle possible underflows in IFM size calcs"
* tag 'drm-fixes-2026-03-07' of https://gitlab.freedesktop.org/drm/kernel: (38 commits)
accel: ethosu: Handle possible underflow in IFM size calculations
accel: ethosu: Fix NPU_OP_ELEMENTWISE validation with scalar
accel: ethosu: Fix job submit error clean-up refcount underflows
accel/amdxdna: Split mailbox channel create function
drm/panthor: Correct the order of arguments passed to gem_sync
Revert "drm/syncobj: Fix handle <-> fd ioctls with dirty stack"
drm/ttm: Fix bo resource use-after-free
nouveau/dpcd: return EBUSY for aux xfer if the device is asleep
accel/amdxdna: Fix major version check on NPU1 platform
drm/amdgpu/userq: refcount userqueues to avoid any race conditions
drm/amdgpu/userq: Consolidate wait ioctl exit path
drm/amdgpu/psp: Use Indirect access address for GFX to PSP mailbox
drm/amdgpu: Fix use-after-free race in VM acquire
drm/amd/pm: remove invalid gpu_metrics.energy_accumulator on smu v13.0.x
drm/xe: Fix memory leak in xe_vm_madvise_ioctl
drm/xe/reg_sr: Fix leak on xa_store failure
drm/xe/xe2_hpg: Correct implementation of Wa_16025250150
drm/xe/gsc: Fix GSC proxy cleanup on early initialization failure
Revert "drm/pagemap: Disable device-to-device migration"
drm/i915/psr: Fix for Panel Replay X granularity DPCD register handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix a few memory leaks (Günther Noack)
- fix potential kernel crashes in cmedia, creative-sb0540 and zydacron
(Greg Kroah-Hartman)
- fix NULL pointer dereference in pidff (Tomasz Pakuła)
- fix battery reporting for Apple Magic Trackpad 2 (Julius Lehmann)
- mcp2221 proper handling of failed read operation (Romain Sioen)
- various device quirks / device ID additions
* tag 'hid-for-linus-2026030601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: mcp2221: cancel last I2C command on read error
HID: asus: add xg mobile 2023 external hardware support
HID: multitouch: Keep latency normal on deactivate for reactivation gesture
HID: apple: Add EPOMAKER TH87 to the non-apple keyboards list
HID: intel-ish-hid: ipc: Add Nova Lake-H/S PCI device IDs
selftests: hid: tests: test_wacom_generic: add tests for display devices and opaque devices
HID: multitouch: new class MT_CLS_EGALAX_P80H84
HID: magicmouse: fix battery reporting for Apple Magic Trackpad 2
HID: pidff: Fix condition effect bit clearing
HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them
HID: asus: avoid memory leak in asus_report_fixup()
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
HID: apple: avoid memory leak in apple_report_fixup()
HID: Document memory allocation properties of report_fixup()
|
|
The preceding changes implemented the framework to support cgroup
sub-scheds and updated scheduling paths and kfuncs so that they have
minimal but working support for sub-scheds. However, actual sub-sched
enabling/disabling hasn't been implemented yet and all tasks stayed on
scx_root.
Implement cgroup sub-sched enabling and disabling to actually activate
sub-scheds:
- Both enable and disable operations bypass only the tasks in the subtree
of the child being enabled or disabled to limit disruptions.
- When enabling, all candidate tasks are first initialized for the child
sched. Once that succeeds, the tasks are exited for the parent and then
switched over to the child. This adds a bit of complication but
guarantees that child scheduler failures are always contained.
- Disabling works the same way in the other direction. However, when the
parent may fail to initialize a task, disabling is propagated up to the
parent. While this means that a parent sched fail due to a child sched
event, the failure can only originate from the parent itself (its
ops.init_task()). The only effect a malfunctioning child can have on the
parent is attempting to move the tasks back to the parent.
After this change, although not all the necessary mechanisms are in place
yet, sub-scheds can take control of their tasks and schedule them.
v2: Fix missing scx_cgroup_unlock()/percpu_up_write() in abort path
(Cheng-Yang Chou).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
In preparation of multiple scheduler support, add p->scx.sched which points
to the scx_sched instance that the task is scheduled by, which is currently
always scx_root. Add scx_task_sched[_rcu]() accessors which return the
associated scx_sched of the specified task and replace the raw scx_root
dereferences with it where applicable. scx_task_on_sched() is also added to
test whether a given task is on the specified sched.
As scx_root is still the only scheduler, this shouldn't introduce
user-visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
A system often runs multiple workloads especially in multi-tenant server
environments where a system is split into partitions servicing separate
more-or-less independent workloads each requiring an application-specific
scheduler. To support such and other use cases, sched_ext is in the process
of growing multiple scheduler support.
When partitioning a system in terms of CPUs for such use cases, an
oft-taken approach is hard partitioning the system using cpuset. While it
would be possible to tie sched_ext multiple scheduler support to cpuset
partitions, such an approach would have fundamental limitations stemming
from the lack of dynamism and flexibility.
Users often don't care which specific CPUs are assigned to which workload
and want to take advantage of optimizations which are enabled by running
workloads on a larger machine - e.g. opportunistic over-commit, improving
latency critical workload characteristics while maintaining bandwidth
fairness, employing control mechanisms based on different criteria than
on-CPU time for e.g. flexible memory bandwidth isolation, packing similar
parts from different workloads on same L3s to improve cache efficiency,
and so on.
As this sort of dynamic behaviors are impossible or difficult to implement
with hard partitioning, sched_ext is implementing cgroup sub-sched support
where schedulers can be attached to the cgroup hierarchy and a parent
scheduler is responsible for controlling the CPUs that each child can use
at any given moment. This makes CPU distribution dynamically controlled by
BPF allowing high flexibility.
This patch adds the skeletal sched_ext cgroup sub-sched support:
- sched_ext_ops.sub_cgroup_id and .sub_attach/detach() are added. Non-zero
sub_cgroup_id indicates that the scheduler is to be attached to the
identified cgroup. A sub-sched is attached to the cgroup iff the nearest
ancestor scheduler implements .sub_attach() and grants the attachment. Max
nesting depth is limited by SCX_SUB_MAX_DEPTH.
- When a scheduler exits, all its descendant schedulers are exited
together. Also, cgroup.scx_sched added which points to the effective
scheduler instance for the cgroup. This is updated on scheduler
init/exit and inherited on cgroup online. When a cgroup is offlined, the
attached scheduler is automatically exited.
- Sub-sched support is gated on CONFIG_EXT_SUB_SCHED which is
automatically enabled if both SCX and cgroups are enabled. Sub-sched
support is not tied to the CPU controller but rather the cgroup
hierarchy itself. This is intentional as the support for cpu.weight and
cpu.max based resource control is orthogonal to sub-sched support. Note
that CONFIG_CGROUPS around cgroup subtree iteration support for
scx_task_iter is replaced with CONFIG_EXT_SUB_SCHED for consistency.
- This allows loading sub-scheds and most framework operations such as
propagating disable down the hierarchy work. However, sub-scheds are not
operational yet and all tasks stay with the root sched. This will serve
as the basis for building up full sub-sched support.
- DSQs point to the scx_sched they belong to.
- scx_qmap is updated to allow attachment of sub-scheds and also serving
as sub-scheds.
- scx_is_descendant() is added but not yet used in this patch. It is used by
later changes in the series and placed here as this is where the function
belongs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi-wmax: Add G-Mode support to m18 laptops
- asus-armoury: Add support for FA401UM, G733QS, GX650RX
- dell-wmi-sysman: Don't hex dump plaintext password data
- hp-bioscfg: Support large number of enumeration attributes
- hp-wmi: Add support for Omen 14-fb1xxx, 16-xd0xxx, 16-wf0xxx, and
Victus-d0xxx
- int3472: Handle GPIO type 0x10 (DOVDD)
- intel-hid:
- Add Dell 14 & 16 Plus 2-in-1 to dmi_vgbs_allow_list
- Enable 5-button array on ThinkPad X1 Fold 16 Gen 1
- mellanox: mlxreg: Fix kernel-doc warnings
- oxpec: Add support for OneXPlayer X1 Air, X1z, APEX, and Aokzoe A2
Pro
- redmi-wmi: Add more Fn hotkey mappings
- thinkpad_acpi: Fix errors reading battery thresholds
- touchscreen_dmi: Add quirk for y-inverted Goodix touchscreen on SUPI
S10
- uniwill-laptop:
- FN lock/super key lock attributes rename
- Fix crash on unexpected battery event
- A special key combination can alter FN lock status so mark it
volatile
- Handle FN lock event
* tag 'platform-drivers-x86-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (27 commits)
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
platform_data/mlxreg: mlxreg.h: fix all kernel-doc warnings
platform/x86: asus-armoury: add support for FA401UM
platform/x86: asus-armoury: add support for GX650RX
platform/x86: hp-bioscfg: Support allocations of larger data
platform/x86: oxpec: Add support for Aokzoe A2 Pro
platform/x86: oxpec: Add support for OneXPlayer X1 Air
platform/x86: oxpec: Add support for OneXPlayer X1z
platform/x86: oxpec: Add support for OneXPlayer APEX
platform/x86: uniwill-laptop: Handle FN lock event
platform/x86: uniwill-laptop: Mark FN lock status as being volatile
platform/x86: uniwill-laptop: Fix crash on unexpected battery event
platform/x86: uniwill-laptop: Rename FN lock and super key lock attrs
platform/x86: redmi-wmi: Add more hotkey mappings
platform/x86: alienware-wmi-wmax: Add G-Mode support to m18 laptops
platform/x86: hp-wmi: add Omen 14-fb1xxx (board 8E41) support
platform/x86: dell-wmi: Add audio/mic mute key codes
platform/x86: hp-wmi: Add Victus 16-d0xxx support
platform/x86: intel-hid: Enable 5-button array on ThinkPad X1 Fold 16 Gen 1
platform/x86: int3472: Handle GPIO type 0x10 (DOVDD)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup into for-7.1
To receive 5b30afc20b3f ("cgroup: Expose some cgroup helpers") which will be
used by sub-sched support.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
To prepare for hierarchical scheduling patchset which will cause multiple
conflicts otherwise.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
On 32-bit architectures, unsigned long is only 32 bits wide, which
causes 64-bit inode numbers to be silently truncated. Several
filesystems (NFS, XFS, BTRFS, etc.) can generate inode numbers that
exceed 32 bits, and this truncation can lead to inode number collisions
and other subtle bugs on 32-bit systems.
Change the type of inode->i_ino from unsigned long to u64 to ensure that
inode numbers are always represented as 64-bit values regardless of
architecture. Update all format specifiers treewide from %lu/%lx to
%llu/%llx to match the new type, along with corresponding local variable
types.
This is the bulk treewide conversion. Earlier patches in this series
handled trace events separately to allow trace field reordering for
better struct packing on 32-bit.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-12-2257ad83d372@kernel.org
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
inode->i_ino is being widened from unsigned long to u64. The audit
subsystem uses unsigned long ino in struct fields, function parameters,
and local variables that store inode numbers from arbitrary filesystems.
On 32-bit platforms this truncates inode numbers that exceed 32 bits,
which will cause incorrect audit log entries and broken watch/mark
comparisons.
Widen all audit ino fields, parameters, and locals to u64, and update
the inode format string from %lu to %llu to match.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-2-2257ad83d372@kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Change the inode hash/lookup VFS API functions to accept u64 parameters
instead of unsigned long for inode numbers and hash values. This is
preparation for widening i_ino itself to u64, which will allow
filesystems to store full 64-bit inode numbers on 32-bit architectures.
Since unsigned long implicitly widens to u64 on all architectures, this
change is backward-compatible with all existing callers.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-1-2257ad83d372@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
