| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest changes are MPAM enablement in drivers/resctrl and new PMU
support under drivers/perf.
On the core side, FEAT_LSUI lets futex atomic operations with EL0
permissions, avoiding PAN toggling.
The rest is mostly TLB invalidation refactoring, further generic entry
work, sysreg updates and a few fixes.
Core features:
- Add support for FEAT_LSUI, allowing futex atomic operations without
toggling Privileged Access Never (PAN)
- Further refactor the arm64 exception handling code towards the
generic entry infrastructure
- Optimise __READ_ONCE() with CONFIG_LTO=y and allow alias analysis
through it
Memory management:
- Refactor the arm64 TLB invalidation API and implementation for
better control over barrier placement and level-hinted invalidation
- Enable batched TLB flushes during memory hot-unplug
- Fix rodata=full block mapping support for realm guests (when
BBML2_NOABORT is available)
Perf and PMU:
- Add support for a whole bunch of system PMUs featured in NVIDIA's
Tegra410 SoC (cspmu extensions for the fabric and PCIe, new drivers
for CPU/C2C memory latency PMUs)
- Clean up iomem resource handling in the Arm CMN driver
- Fix signedness handling of AA64DFR0.{PMUVer,PerfMon}
MPAM (Memory Partitioning And Monitoring):
- Add architecture context-switch and hiding of the feature from KVM
- Add interface to allow MPAM to be exposed to user-space using
resctrl
- Add errata workaround for some existing platforms
- Add documentation for using MPAM and what shape of platforms can
use resctrl
Miscellaneous:
- Check DAIF (and PMR, where relevant) at task-switch time
- Skip TFSR_EL1 checks and barriers in synchronous MTE tag check mode
(only relevant to asynchronous or asymmetric tag check modes)
- Remove a duplicate allocation in the kexec code
- Remove redundant save/restore of SCS SP on entry to/from EL0
- Generate the KERNEL_HWCAP_ definitions from the arm64 hwcap
descriptions
- Add kselftest coverage for cmpbr_sigill()
- Update sysreg definitions"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (109 commits)
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
ACPI: AGDI: fix missing newline in error message
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
...
|
|
Update arm_cspmu to use acpi_get_cpu_uid() instead of
get_acpi_id_for_cpu(), aligning with unified ACPI CPU UID interface.
No functional changes are introduced by this switch (valid inputs retain
original behavior).
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260401081640.26875-7-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When building for 32-bit ARM, there is a warning when using the %llx
specifier to print a resource_size_t variable:
drivers/perf/arm-cmn.c: In function 'arm_cmn_init_dtc':
drivers/perf/arm-cmn.c:2149:73: error: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'resource_size_t' {aka 'unsigned int'} [-Werror=format=]
2149 | "Failed to request DTC region 0x%llx\n", base);
| ~~~^ ~~~~
| | |
| | resource_size_t {aka unsigned int}
| long long unsigned int
| %x
Use the %pa specifier to handle the possible sizes of phys_addr_t
properly. This requires passing the variable by reference.
Fixes: 5394396ff548 ("perf/arm-cmn: Stop claiming entire iomem region")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Robin murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Check devm_ioremap() return value for NULL instead of ERR_PTR and return
-ENOMEM on failure. devm_ioremap() never returns ERR_PTR, using IS_ERR()
skips the error path and may cause a NULL pointer dereference.
Fixes: 5394396ff548 ("perf/arm-cmn: Stop claiming entire iomem region")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Adds NVIDIA C2C PMU support in Tegra410 SOC. This PMU is
used to measure memory latency between the SOC and device
memory, e.g GPU Memory (GMEM), CXL Memory, or memory on
remote Tegra410 SOC.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Adds CPU Memory (CMEM) Latency PMU support in Tegra410 SOC.
The PMU is used to measure latency between the edge of the
Unified Coherence Fabric to the local system DRAM.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Adds PCIE-TGT PMU support in Tegra410 SOC. This PMU is
instanced in each root complex in the SOC and it captures
traffic originating from any source towards PCIE BAR and CXL
HDM range. The traffic can be filtered based on the
destination root port or target address range.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Adds PCIE PMU support in Tegra410 SOC. This PMU is instanced
in each root complex in the SOC and can capture traffic from
PCIE device to various memory types. This PMU can filter traffic
based on the originating root port or BDF and the target memory
types (CPU DRAM, GPU Memory, CXL Memory, or remote Memory).
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add interface to get ACPI device associated with the
PMU. This ACPI device may contain additional properties
not covered by the standard properties.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The Unified Coherence Fabric (UCF) contains last level cache
and cache coherent interconnect in Tegra410 SOC. The PMU in
this device can be used to capture events related to access
to the last level cache and memory from different sources.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
So far, the PMU has been the only thing of interest in the vast mass
of CMN registers, so we've gotten away with simply claiming the entire
iomem region. However, now that we can support other features like MPAM
controllers for the system caches, the PMU driver needs to stop being
selfish and learn to share. Similarly to arm-ni, requesting just the
DTC node(s) should suffice for staking our exclusive claim to the PMU
features, as requesting hundreds of tiny regions for all the individual
pmu_event_sel registers is definitely not worth the considerable bother.
As a consequence, we can also streamline the annoying CMN-600 special
cases even more. The ACPI binding has in fact always specified a strict
order for all resources, so we can reasonably drop the ancient pretence
of swapping base and cfg, which IIRC was more just a moment of doubt on
my part than anything else.
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too.
Cc: stable@vger.kernel.org
Fixes: 7819e05a0dce ("perf/arm-cmn: Revamp model detection")
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When arm_spe_pmu_next_off() fails to calculate a valid limit, it returns
zero to indicate that tracing should not start. However, the caller
arm_spe_perf_aux_output_begin() does not propagate this failure by
updating hwc->state, cause the error to be silently ignored by upper
layers.
Because hwc->state remains zero after a failure, arm_spe_pmu_start()
continues to programs filter registers unnecessarily. The driver
still reports success to the perf core, so the core assumes the SPE
event was enabled and proceeds to enable other events. This breaks
event group semantics: SPE is already stopped while other events in the
same group are enabled.
Fix this by updating arm_spe_perf_aux_output_begin() to return a status
code indicating success (0) or failure (-EIO). Both the interrupt
handler and arm_spe_pmu_start() check the return value and call
arm_spe_pmu_stop() to set PERF_HES_STOPPED in hwc->state.
In the interrupt handler, the period (e.g., period_left) needs to be
updated, so PERF_EF_UPDATE is passed to arm_spe_pmu_stop(). When the
error occurs during event start, the trace unit is not yet enabled, so
a flag '0' is used to drain buffer and update state only.
Fixes: d5d9696b0380 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
The intention here was probably not allowing forced-threading.
Replace IRQF_ONESHOT with IRQF_NO_THREAD.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since we do not use the divide-by-64 option, there should be no
significant difference between the dedicated cycle counter and the
standard cycles event. Since using the latter on DSU-120 now has
the side-effect of allowing multiple cycles events to be scheduled
simultaneously (beneficial for multiple cycle-based metrics), there
seems little reason not to allow the same on older DSUs as well.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DSU-120 has the same system register interface as previous DSUs, but
no longer offers a dedicated cycle counter. While this is not directly
discoverable via PMCR, the PMCCNTR register is still defined to exist
with RAZ/WI behaviour, allowing for a straightforward heuristic.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DSU-110 sneakily made all the event counters 64-bit, perhaps related
to no longer having AArch32 EL1 to worry about. While the DSU version
itself is not easily discoverable, the size of a counter certainly is.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
bitmap_empty() is more verbose and efficient, as it stops traversing
bitmaps as soon as the 1st set bit found.
Switch perf code to using bitmap_empty() where appropriate, and
correspondingly use boolean types.
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The functional safety features of CMN-600AE have little to no impact on
the PMU relative to the base CMN-600 design, so for simplicity we can
reasonably just treat it as the same thing. The only obvious difference
is that the revision numbers aren't aligned, so we may hide some aliases
for events which do actually exist, but those can still be specified via
the underlying "type,eventid" format so it's not too big a deal.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"Updates for the interrupt core and treewide cleanups:
- Rework of the Per Processor Interrupt (PPI) management on ARM[64]
PPI support was built under the assumption that the systems are
homogenous so that the same CPU local device types are connected to
them. That's unfortunately wishful thinking and created horrible
workarounds.
This rework provides affinity management for PPIs so that they can
be individually configured in the firmware tables and mops up the
related drivers all over the place.
- Prevent CPUSET/isolation changes to arbitrarily affine interrupt
threads to random CPUs, which ignores user or driver settings.
- Plug a harmless race in the interrupt affinity proc interface,
which allows to see a half updated mask
- Adjust the priority of secondary interrupt threads on RT, so that
the combination of primary and secondary thread emulates the
hardware interrupt plus thread scenario. Having them at the same
priority can cause starvation issues in some drivers"
* tag 'irq-core-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
genirq: Remove cpumask availability check on kthread affinity setting
genirq: Fix interrupt threads affinity vs. cpuset isolated partitions
genirq: Prevent early spurious wake-ups of interrupt threads
genirq: Use raw_spinlock_irq() in irq_set_affinity_notifier()
genirq/manage: Reduce priority of forced secondary interrupt handler
genirq/proc: Fix race in show_irq_affinity()
genirq: Fix percpu_devid irq affinity documentation
perf: arm_pmu: Kill last use of per-CPU cpu_armpmu pointer
irqdomain: Kill of_node_to_fwnode() helper
genirq: Kill irq_{g,s}et_percpu_devid_partition()
irqchip: Kill irq-partition-percpu
irqchip/apple-aic: Drop support for custom PMU irq partitions
irqchip/gic-v3: Drop support for custom PPI partitions
coresight: trbe: Request specific affinities for per CPU interrupts
perf: arm_spe_pmu: Request specific affinities for per CPU interrupts
perf: arm_pmu: Request specific affinities for per CPU NMIs/interrupts
genirq: Add request_percpu_irq_affinity() helper
genirq: Allow per-cpu interrupt sharing for non-overlapping affinities
genirq: Update request_percpu_nmi() to take an affinity
genirq: Add affinity to percpu_devid interrupt requests
...
|
|
SPE_FEAT_FDS adds the ability to filter on the data source of packets.
Like the other existing filters, enable filtering with PMSFCR_EL1.FDS
when any of the filter bits are set.
Each bit position of the 64 bit filter maps to numerical data sources
0-63 described by bits[0:5] in the data source packet (although the full
range of data source is 16 bits so higher value data sources can't be
filtered on). The filter is an OR of all the filter bits, so for example
clearing filter bits 0 and 3 only includes packets from data sources 0
OR 3.
Invert the filter given by userspace so that the default value of 0 is
equivalent to including all values (no filtering). This allows us to
skip adding a new format bit to enable filtering and still support
excluding all data sources which would have been a filter value of 0 if
not for the inversion.
Tested-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There is a PMU in DB, which has the same function with PMU in DDR
subsystem, the difference is PMU in DB only supports cycles, axid-read,
axid-write events.
e.g.
perf stat -a -e imx8_db0/axid-read,axi_mask=0xMMMM,axi_id=0xDDDD,axi_port=0xPP,axi_channel=0xH/ cmd
perf stat -a -e imx8_db0/axid-write,axi_mask=0xMMMM,axi_id=0xDDDD,axi_port=0xPP,axi_channel=0xH/ cmd
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Get and enable optional clks because fsl,imx8dxl-db-pmu have two clocks.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Move ida_alloc() from helper ddr_perf_init() into ddr_perf_probe() to
clarify why ida_free() must be called at the error path.
Add return value check for ida_alloc().
Rename label 'cpuhp_state_err' to 'idr_free' to make the code clearer,
since two error paths now jump to this label.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The file tools/arch/riscv/include/asm/csr.h borrows from
arch/riscv/include/asm/csr.h, and subsequent modifications
related to CSR should maintain consistency.
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Link: https://patch.msgid.link/20251114071215.816-1-cp0613@linux.alibaba.com
[pjw@kernel.org: dropped Fixes: lines for patches that weren't broken; removed superfluous blank line]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
LKP points out an operator precedence oversight in the new NoC S3
support that, annoyingly, my local W=1 build didn't flag. In fixing
that, we can also take the similarly-missed opportunity to cache the
version check itself at event_init time.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511041749.ok8zDP6u-lkp@intel.com/
Fixes: 8fa08f8835e5 ("perf/arm-ni: Add NoC S3 support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add CPU PMU compatible strings for Cortex-A320, Cortex-A520AE,
Cortex-A720AE, and C1 Nano/Premium/Pro/Ultra.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
driver_find_device() calls get_device() to increment the reference
count once a matching device is found. device_release_driver()
releases the driver, but it does not decrease the reference count that
was incremented by driver_find_device(). At the end of the loop, there
is no put_device() to balance the reference count. To avoid reference
count leakage, add put_device() to decrease the reference count.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: bfc653aa89cb ("perf: arm_cspmu: Separate Arm and vendor module")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
NoC S3 and its SI L1 sibling look largely similar to their predecessors,
but add the notion of subfeatures to the discovery process, which we now
use to find the event muxes for each device node. Plus, as ever, more
mildly annoying shuffling around of some of the PMU registers (this time
it's the counters...)
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Support NVIDIA PMU that utilizes the optional event filter2 register.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Distinguish NVIDIA devices by revision and variant bits
in PMIIDR register in addition to product id.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The PMIIDR value is composed by the values in PMPIDR registers.
We can use PMPIDR registers as alternative for device
identification for systems that do not implement PMIIDR.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implementer may need to reset a filter config when
stopping a counter, thus adding a callback for this.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CPU_CYCLES is expected to count the logical CPU (PE) clock. Currently it's
preferred to use PMCCNTR_EL0 for counting CPU_CYCLES, but it'll count
processor clock rather than the PE clock (ARM DDI0487 L.b D13.1.3) if
one of the SMT siblings is not idle on a multi-threaded implementation.
So don't use it on SMT cores.
Introduce topology_core_has_smt() for knowing the SMT implementation and
cached it in arm_pmu::has_smt during allocation.
When counting cycles on SMT CPU 2-3 and CPU 3 is idle, without this
patch we'll get:
[root@client1 tmp]# perf stat -e cycles -A -C 2-3 -- stress-ng -c 1
--taskset 2 --timeout 1
[...]
Performance counter stats for 'CPU(s) 2-3':
CPU2 2880457316 cycles
CPU3 2880459810 cycles
1.254688470 seconds time elapsed
With this patch the idle state of CPU3 is observed as expected:
[root@client1 ~]# perf stat -e cycles -A -C 2-3 -- stress-ng -c 1
--taskset 2 --timeout 1
[...]
Performance counter stats for 'CPU(s) 2-3':
CPU2 2558580492 cycles
CPU3 305749 cycles
1.113626410 seconds time elapsed
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Having removed the use of the cpu_armpmu per-CPU variable from the
interrupt handling, the only user left is the BRBE scheduler hook.
It is easy to drop the use of this variable by following the pointer to the
generic PMU structure, and get the arm_pmu structure from there.
Perform the conversion and kill cpu_armpmu altogether.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-27-maz@kernel.org
|
|
Let the SPE driver request interrupts with an affinity mask matching the SPE
implementation affinity.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-20-maz@kernel.org
|
|
Let the PMU driver request both NMIs and normal interrupts with an affinity mask
matching the PMU affinity.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-19-maz@kernel.org
|
|
Continue spreading the notion of affinity to the per CPU interrupt request
code by updating the call sites that use request_percpu_nmi() (all two of
them) to take an affinity pointer. This pointer is firmly NULL for now.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-16-maz@kernel.org
|
|
Now that the relevant interrupt controllers are equipped with a callback
returning the affinity of per-CPU interrupts, switch the ARM SPE driver
over to this new method.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20251020122944.3074811-10-maz@kernel.org
|
|
Now that the relevant interrupt controllers are equipped with a callback
returning the affinity of per-CPU interrupts, switch the OF side of the ARM
PMU driver over to this new method.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20251020122944.3074811-9-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Preserve old 'tt_core' UAPI for Hisilicon L3C PMU driver
- Ensure linear alias of kprobes instruction page is not writable
- Fix kernel stack unwinding from BPF
- Fix build warnings from the Fujitsu uncore PMU documentation
- Fix hang with deferred 'struct page' initialisation and MTE
- Consolidate KPTI page-table re-writing code
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not flag the zero page as PG_mte_tagged
docs: perf: Fujitsu: Fix htmldocs build warnings and errors
arm64: mm: Move KPTI helpers to mmu.c
tracing: Fix the bug where bpf_get_stackid returns -EFAULT on the ARM64
arm64: kprobes: call set_memory_rox() for kprobe page
drivers/perf: hisi: Add tt_core_deprecated for compatibility
|
|
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit a6ad54137af9 ("Merge branch 'guest-memfd-mmap' into HEAD")
- guest_memfd in Firecracker:
https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
- direct map removal:
https://lore.kernel.org/all/20250221160728.1584559-1-roypat@amazon.co.uk/
- mmap support:
https://lore.kernel.org/all/20250328153133.3504118-1-tabba@google.com/
ARM:
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This
will hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then
allows a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
LoongArch:
- Detect page table walk feature on new hardware
- Add sign extension with kernel MMIO/IOCSR emulation
- Improve in-kernel IPI emulation
- Improve in-kernel PCH-PIC emulation
- Move kvm_iocsr tracepoint out of generic code
RISC-V:
- Added SBI FWFT extension for Guest/VM with misaligned delegation
and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V
- Added SBI v3.0 PMU enhancements in KVM and perf driver
s390:
- Improve interrupt cpu for wakeup, in particular the heuristic to
decide which vCPU to deliver a floating interrupt to.
- Clear the PTE when discarding a swapped page because of CMMA; this
bug was introduced in 6.16 when refactoring gmap code.
x86 selftests:
- Add #DE coverage in the fastops test (the only exception that's
guest- triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR),
Sierra Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
x86 (guest side):
- For the legacy PCI hole (memory between TOLUD and 4GiB) to UC when
overriding guest MTRR for TDX/SNP to fix an issue where ACPI
auto-mapping could map devices as WB and prevent the device drivers
from mapping their devices with UC/UC-.
- Make kvm_async_pf_task_wake() a local static helper and remove its
export.
- Use native qspinlocks when running in a VM with dedicated
vCPU=>pCPU bindings even when PV_UNHALT is unsupported.
Generic:
- Remove a redundant __GFP_NOWARN from kvm_setup_async_pf() as
__GFP_NOWARN is now included in GFP_NOWAIT.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (178 commits)
KVM: s390: Fix to clear PTE when discarding a swapped page
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
KVM: selftests: Add ex_str() to print human friendly name of exception vectors
selftests/kvm: remove stale TODO in xapic_state_test
KVM: selftests: Handle Intel Atom errata that leads to PMU event overcount
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather
than open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if
they are available
- The ability to identity and communicate to userspace the presence
of a MIPS P8700-specific ISA extension, and to leverage its
MIPS-specific PAUSE implementation in cpu_relax()
- Several other miscellaneous cleanups
* tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (39 commits)
riscv: errata: Fix the PAUSE Opcode for MIPS P8700
riscv: hwprobe: Document MIPS xmipsexectl vendor extension
riscv: hwprobe: Add MIPS vendor extension probing
riscv: Add xmipsexectl instructions
riscv: Add xmipsexectl as a vendor extension
dt-bindings: riscv: Add xmipsexectl ISA extension description
riscv: cpufeature: add validation for zfa, zfh and zfhmin
perf: riscv: skip empty batches in counter start
selftests: riscv: Add README for RISC-V KSelfTest
riscv: sbi: Switch to new sys-off handler API
riscv: Move vendor errata definitions to new header
RISC-V: ACPI: enable parsing the BGRT table
riscv: Enable ARCH_HAVE_NMI_SAFE_CMPXCHG
riscv: pi: use 'targets' instead of extra-y in Makefile
riscv: introduce asm/swab.h
riscv: mmap(): use unsigned offset type in riscv_sys_mmap
drivers/perf: riscv: Remove redundant ternary operators
riscv: mm: Use mmu-type from FDT to limit SATP mode
riscv: mm: Return intended SATP mode for noXlvl options
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
...
|
|
Previously tt_core is defined as config1:0-7 which may not cover all
the CPUs sharing L3C on platforms with more than 8 CPUs in a L3C. In
order to support such platforms extend tt_core to 16 bits, since no
spare space in config1, tt_core was moved to config2:0-15.
Though linux expects the users to retrieve the control encoding from
sysfs first for each option, it's possible if user doesn't follow
this and hardcoded tt_core in config1. So add an option
tt_core_deprecated for config1:0-7 for backward compatibility.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix use of uninitialized variable in group validation code.
Fixes: 71396cfac97d ("perf/dwc_pcie: Support counting multiple lane events in parallel")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202509231223.gZsX6Eio-lkp@intel.com/
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch adds support for L3C PMU v3. The v3 L3C PMU supports
an extended events space which can be controlled in up to 2 extra
address spaces with separate overflow interrupts. The layout
of the control/event registers are kept the same. The extended events
with original ones together cover the monitoring job of all transactions
on L3C.
The extended events is specified with `ext=[1|2]` option for the
driver to distinguish, like below:
perf stat -e hisi_sccl0_l3c0_0/event=<event_id>,ext=1/
Currently only event option using config bit [7, 0]. There's
still plenty unused space. Make ext using config [16, 17] and
reserve bit [15, 8] for event option for future extension.
With the capability of extra counters, number of counters for HiSilicon
uncore PMU could reach up to 24, the usedmap is extended accordingly.
The hw_perf_event::event_base is initialized to the base MMIO
address of the event and will be used for later control,
overflow handling and counts readout.
We still make use of the Uncore PMU framework for handling the
events and interrupt migration on CPU hotplug. The framework's
cpuhp callback will handle the event migration and interrupt
migration of orginial event, if PMU supports extended events
then the interrupt of extended events is migrated to the same
CPU choosed by the framework.
A new HID of HISI0215 is used for this version of L3C PMU.
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Co-developed-by: Yushan Wang <wangyushan12@huawei.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
