| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
|
|
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
[ 84.384540] clk:231:5 already disabled
[ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac
...
[ 84.579183] Call trace:
[ 84.581624] clk_core_disable+0xa4/0xac
[ 84.585457] clk_disable+0x30/0x4c
[ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi]
[ 84.593651] pm_generic_suspend+0x2c/0x44
[ 84.597661] ti_sci_pd_suspend+0xbc/0x15c
[ 84.601670] dpm_run_callback+0x8c/0x14c
[ 84.605588] __device_suspend+0x1a0/0x56c
[ 84.609594] dpm_suspend+0x17c/0x21c
[ 84.613165] dpm_suspend_start+0xa0/0xa8
[ 84.617083] suspend_devices_and_enter+0x12c/0x634
[ 84.621872] pm_suspend+0x1fc/0x368
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks.
Link: https://lore.kernel.org/all/fbde0659-78f3-46e4-98cf-d832f765a18b@ideasonboard.com/
Cc: stable@vger.kernel.org # 6.1.x
Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260505134705.188661-2-ivitro@gmail.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
|
|
Now that we introduced a new drm_output_color_format enum to represent
what DRM_COLOR_FORMAT_* bits were representing, we can switch to the new
enum.
The main difference is that while DRM_COLOR_FORMAT_ was a bitmask,
drm_output_color_format is a proper enum. However, the enum was done is
such a way than DRM_COLOR_FORMAT_X = BIT(DRM_OUTPUT_COLOR_FORMAT_X) so
the transitition is easier.
The only thing we need to consider is if the original code meant to use
that value as a bitmask, in which case we do need to keep the bit shift,
or as a discriminant in which case we don't.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-7-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Reduce the log level for cdns_mhdp_dpcd_read and cdns_mhdp_dpcd_write
errors in cdns_mhdp_transfer function as in case of failure, there is
flooding of these prints along with other indicators like EDID failure
logs which are fairly intuitive in themselves rendering these error logs
useless.
Also, the caller functions for the cdns_mhdp_transfer in drm_dp_helper.c
(which calls it 32 times), has debug log level in case transfer fails.
So having a superseding log level in cdns_mhdp_transfer seems bad.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20251209120332.3559893-7-h-shenoy@ti.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Now that we have dropped the legacy code which became redundant with
introduction of DRM_BRIDGE_ATTACH_NO_CONNECTOR
usecase in driver,we can cleanly switch to drm_connector pointer
instead of structure.
Rename the connector_ptr member variable to connector for clarity and
consistency. The driver was using both connector and connector_ptr members,
but connector_ptr was the only one actually used throughout the code.
This change removes the unused connector struct member and renames
connector_ptr to connector for better readability.
This is purely a code cleanup change with no functional impact. All
references to connector_ptr are updated to use the renamed connector
variable throughout the driver.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20251209120332.3559893-6-h-shenoy@ti.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
initialisation in bridge
Now that this bridge supports DRM_BRIDGE_ATTACH_NO_CONNECTOR,
and only TI K3 platforms consume this driver and
tidss (their display controller) has DRM_BRIDGE_ATTACH_NO_CONNECTOR
flag set,we can remove the legacy code for the
non-DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20251209120332.3559893-5-h-shenoy@ti.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
check
Now that we have DRM_BRIDGE_ATTACH_NO_CONNECTOR framework, handle the
HDCP state change in bridge atomic check as well to enable correct
functioning for HDCP in both DRM_BRIDGE_ATTACH_NO_CONNECTOR and
!DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
Without this patch, when using DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, HDCP
state changes would not be properly handled during atomic commits,
potentially leading to HDCP authentication failures or incorrect
protection status for content requiring HDCP encryption.
Fixes: 6a3608eae6d33 ("drm: bridge: cdns-mhdp8546: Enable HDCP")
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20251209120332.3559893-4-h-shenoy@ti.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Add cdns_mhdp_bridge_mode_valid() to check if specific mode is valid for
this bridge or not. In the legacy usecase with
!DRM_BRIDGE_ATTACH_NO_CONNECTOR we were using the hook from
drm_connector_helper_funcs but with DRM_BRIDGE_ATTACH_NO_CONNECTOR
we need to have mode_valid() in drm_bridge_funcs.
Without this patch, when using DRM_BRIDGE_ATTACH_NO_CONNECTOR
flag, the cdns_mhdp_bandwidth_ok() function would not be called
during mode validation, potentially allowing modes that exceed
the bridge's bandwidth capabilities to be incorrectly marked as
valid.
Fixes: c932ced6b585 ("drm/tidss: Update encoder/bridge chain connect model")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20251209120332.3559893-3-h-shenoy@ti.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
atomic_enable()
In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read()
in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hit
NULL pointer while trying to access the mutex. We need the connector to
be set before that. Unlike in legacy cases with flag
!DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialised
in bridge_attach(), so add the mhdp->connector_ptr in device structure
to handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and
!DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier to
avoid possible NULL pointer dereference in recovery paths like
modeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set.
Fixes: c932ced6b585 ("drm/tidss: Update encoder/bridge chain connect model")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20251209120332.3559893-2-h-shenoy@ti.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
Add missing mutex unlock before returning from the error path in
cdns_mhdp_atomic_enable().
Fixes: 935a92a1c400 ("drm: bridge: cdns-mhdp8546: Fix possible null pointer dereference")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qi Xi <xiqi2@huawei.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250904034447.665427-1-xiqi2@huawei.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
When no other driver selects CONFIG_VIDEOMODE_HELPERS but
CONFIG_DRM_CDNS_DSI is enabled, there is a linker or modpost error:
ERROR: modpost: "drm_display_mode_to_videomode" [drivers/gpu/drm/bridge/cadence/cdns-dsi.ko] undefined!
Select VIDEOMODE_HELPERS to ensure that this helper function is
available to the driver.
Fixes: ce4bc5ca7c1d ("drm/bridge: cdns-dsi: Use video mode and clean up cdns_dsi_mode2cfg()")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250821-cdns-videohelpers-v1-1-853e021908cf@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
While the cdns-dsi does not support DSI burst mode, the burst mode is
essentially DSI event mode with more versatile clocking and timings.
Thus cdns-dsi doesn't need to fail if the DSI peripheral driver requests
MIPI_DSI_MODE_VIDEO_BURST.
In my particular use case, this allows the use of ti-sn65dsi83 driver.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-15-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The driver currently expects the pixel clock and the HS clock to be
compatible, but the DPHY PLL doesn't give very finely grained rates.
This often leads to the situation where the pipeline just fails, as the
resulting HS clock is just too off.
We could change the driver to do a better job on adjusting the DSI
blanking values, hopefully getting a working pipeline even if the pclk
and HS clocks are not exactly compatible. But that is a bigger work.
What we can do easily is to see in .atomic_check() what HS clock rate we
can get, based on the pixel clock rate, and then convert the HS clock
rate back to pixel clock rate and ask that rate from the crtc. If the
crtc has a good PLL (which is the case for TI K3 SoCs), this will fix
any issues wrt. the clock rates.
If the crtc cannot provide the requested clock, well, we're no worse off
with this patch than what we have at the moment.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-14-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The timings calculation gets it wrong for DSI event mode, resulting in
too large hbp value. Fix the issue by taking into account the
pulse/event mode difference.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-13-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The driver does all the calculations and programming with video timings
(hftp, hbp, etc.) instead of the modeline values (hsync_start, ...).
Thus it makes sense to use struct videomode instead of struct
drm_display_mode internally.
Switch to videomode and do some cleanups in cdns_dsi_mode2cfg() along
the way.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-12-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The driver tries to calculate the value for REG_WAKEUP_TIME. However,
the calculation itself is not correct, and to add on it, the resulting
value is almost always larger than the field's size, so the actual
result is more or less random.
According to the docs, figuring out the value for REG_WAKEUP_TIME
requires HW characterization and there's no way to have a generic
algorithm to come up with the value. That doesn't help at all...
However, we know that the value must be smaller than the line time, and,
at least in my understanding, the proper value for it is quite small.
Testing shows that setting it to 1/10 of the line time seems to work
well. All video modes from my HDMI monitor work with this algorithm.
Hopefully we'll get more information on how to calculate the value, and
we can then update this.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-11-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The Cadence DSI requires negative syncs from the incoming video signal,
but at the moment that requirement is not expressed in any way. If the
crtc decides to use positive syncs, things break down.
Use the adjusted_mode in atomic_check to set the sync flags to negative
ones.
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-10-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
cdns_dsi_adjust_phy_config() is called from cdns_dsi_check_conf(), which
is called from .atomic_check(). It checks the DSI htotal and adjusts it
to align on the DSI lane boundary by changing hfp and then recalculating
htotal and HS clock rate.
This has a few problems.
First is the fact that the whole thing is not needed: we do not need to
align on the lane boundary. The whole frame is sent in HS mode, and it
is fine if the line's last byte clock tick fills, say, only 2 of the 4
lanes. The next line will just continue from there. Assuming the
DSI timing values have been calculated to match the incoming DPI stream,
and the HS clock is compatible with the DPI pixel clock, the "uneven"
DSI lines will even out when multiple lines are being sent.
But we could do the align, aligning is not a problem as such. However,
adding more bytes to the hfp, as the function currently does, makes the
DSI line time longer, so the function then adjusts the HS clock rate.
This is where things fail: we don't know what rates we can get from the
HS clock, and at least in TI K3 SoC case the rates are quite coarsely
grained. Thus small adjustment to hfp will lead to a big change in HS
clock rate, and things break down.
We could do a loop here, adjusting hfp, adjusting clock, checking clock
rate, adjusting hfp again, etc., but considering that the whole
adjustment shouldn't be needed at all, it's easier to just remove the
function.
Something like this function should be added back later, when adding
burst mode support, but that's a bigger change and I don't think this
function would help that work in any way.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-9-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
cdns_dsi_mode2cfg() calculates the dsi timings, but for some reason
doesn't set the htotal based on those timings. It is set only later, in
cdns_dsi_adjust_phy_config().
As cdns_dsi_mode2cfg() is the logical place to calculate it, let's move
it there. Especially as the following patch will remove
cdns_dsi_adjust_phy_config().
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-8-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The docs say about mode_valid():
"it is not allowed to look at anything else but the passed-in mode, and
validate it against configuration-invariant hardware constraints"
We're doing a lot more than just looking at the mode. The main issue
here is that we're doing checks based on the pixel clock, before we know
what the pixel clock from the crtc actually is.
So, drop the cdns_dsi_check_conf() call from .mode_valid().
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-7-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The driver checks if "DPI(HFP) > DSI(HSS+HSA+HSE+HBP)", and rejects the
mode if not.
However, testing shows that this doesn't hold at all. I can set the hfp
to very small values, with no errors. The feedback from the HW team also
was that the check is not right, although it's not clear if there's a
way to validate the FIFO emptying.
The check rejects quite a lot of modes, apparently for no good reason,
so drop the check.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-6-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
With recent change the cdns_dsi_check_conf() is always called with
mode_valid_check = true. We can thus remove all the code related to the
"false" paths.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-5-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Remove extra line at the end of the file.
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-4-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Use the "adjusted_mode" for the dsi configuration check, as that is the
more appropriate display_mode for validation, and later bridge enable.
Also, fix the mode_valid_check parameter from false to true, as the dsi
configuration check is taking place during the check-phase, and the
crtc_* mode values are not expected to be populated yet.
Fixes: a53d987756ea ("drm/bridge: cdns-dsi: Move DSI mode check to _atomic_check()")
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-1-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
In some application scenarios, we hope to get the corresponding
connector when the bridge's detect hook is invoked.
In most cases, we can get the connector by drm_atomic_get_connector_for_encoder
if the encoder attached to the bridge is enabled, however there will
still be some scenarios where the detect hook of the bridge is called
but the corresponding encoder has not been enabled yet. For instance,
this occurs when the device is hot plug in for the first time.
Since the call to bridge's detect is initiated by the connector, passing
down the corresponding connector directly will make things simpler.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The cdns-dsi controller requires that it be turned on completely before
the input DPI's source has begun streaming[0]. Not having that, allows
for a small window before cdns-dsi enable and after cdns-dsi disable
where the previous entity (in this case tidss's videoport) to continue
streaming DPI video signals. This small window where cdns-dsi is
disabled but is still receiving signals causes the input FIFO of
cdns-dsi to get corrupted. This causes the colors to shift on the output
display. The colors can either shift by one color component (R->G, G->B,
B->R), or by two color components (R->B, G->R, B->G).
Since tidss's videoport starts streaming via crtc enable hooks, we need
cdns-dsi to be up and running before that. Now that the bridges are
pre_enabled before crtc is enabled, and post_disabled after crtc is
disabled, use the pre_enable and post_disable hooks to get cdns-dsi
ready and running before the tidss videoport to get pass the color shift
issues.
[0]: See section 12.6.5.7.3 "Start-up Procedure" in J721E SoC TRM
TRM Link: http://www.ti.com/lit/pdf/spruil1
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250605171524.27222-5-aradhya.bhatia@linux.dev
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
devm_drm_bridge_alloc() API
devm_drm_bridge_alloc() is the new API to be used for allocating (and
partially initializing) a private driver struct embedding a struct
drm_bridge.
For many drivers having a simple code flow in the probe function, this
commit does a mass conversion automatically with the following semantic
patch. The changes have been reviewed manually for correctness as well as
to find any false positives.
The patch has been applied with the explicit exclusion of bridge/panel.c,
handled by a separate patch.
After applying the semantic patch, manually fixed these issues:
- 4 drivers need ERR_CAST() instead of PTR_ERR() as the function calling
devm_drm_bridge_alloc() returns a pointer
- re-added empty lines and comments that the script had removed but that
should stay
@@
type T;
identifier C;
identifier BR;
expression DEV;
expression FUNCS;
@@
-T *C;
+T *C;
...
(
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return -ENOMEM;
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
|
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return ERR_PTR(-ENOMEM);
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
)
...
-C->BR.funcs = FUNCS;
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> # microchip-lvds.c
Reviewed-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Tested-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-2-b8bc1f16d7aa@bootlin.com
[Luca: fixed trivial patch conflict in adv7511_drv.c while applying]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
This is the new API for allocating DRM bridges.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-4-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Use the common dp link power up/down helpers to avoid duplicating code.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318063452.4983-2-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
At present, the DSI mode configuration check happens during the
_atomic_enable() phase, which is not really the best place for this.
Moreover, if the mode is not valid, the driver gives a warning and
continues the hardware configuration.
Move the DSI mode configuration check to _atomic_check() instead, which
can properly report back any invalid mode, before the _enable phase even
begins.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-10-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add support for the input format negotiation hook, that uses the helper
drm_mipi_dsi_get_input_bus_fmt() for dsi hosts, to figure out the
required input format.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-9-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Instead of manually finding the next bridge/panel, and maintaining the
panel-bridge (in-case the next entity is a panel), switch to using the
automatically managing devm_drm_of_get_bridge() API.
Drop the drm_panel support completely from the driver while at it.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-7-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Once the DSI Link and DSI Phy are initialized, the code needs to wait
for Clk and Data Lanes to be ready, before continuing configuration.
This is in accordance with the DSI Start-up procedure, found in the
Technical Reference Manual of Texas Instrument's J721E SoC[0] which
houses this DSI TX controller.
If the previous bridge (or crtc/encoder) are configured pre-maturely,
the input signal FIFO gets corrupt. This introduces a color-shift on the
display.
Allow the driver to wait for the clk and data lanes to get ready during
DSI enable.
[0]: See section 12.6.5.7.3 "Start-up Procedure" in J721E SoC TRM
TRM Link: http://www.ti.com/lit/pdf/spruil1
Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver")
Cc: stable@vger.kernel.org
Tested-by: Dominik Haller <d.haller@phytec.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-6-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Check for the return value of the phy_mipi_dphy_get_default_config()
call, and in case of an error, return back the same.
Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-5-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The crtc_* mode parameters do not get generated (duplicated in this
case) from the regular parameters before the mode validation phase
begins.
The rest of the code conditionally uses the crtc_* parameters only
during the bridge enable phase, but sticks to the regular parameters
for mode validation. In this singular instance, however, the driver
tries to use the crtc_clock parameter even during the mode validation,
causing the validation to fail.
Allow the D-Phy config checks to use mode->clock instead of
mode->crtc_clock during mode_valid checks, like everywhere else in the
driver.
Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-4-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The driver code doesn't have a Phy de-initialization path as yet, and so
it does not clear the phy_initialized flag while suspending. This is a
problem because after resume the driver looks at this flag to determine
if a Phy re-initialization is required or not. It is in fact required
because the hardware is resuming from a suspend, but the driver does not
carry out any re-initialization causing the D-Phy to not work at all.
Call the counterparts of phy_init() and phy_power_on(), that are
phy_exit() and phy_power_off(), from _bridge_post_disable(), and clear
the flags so that the Phy can be initialized again when required.
Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-3-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Fix the OF node pointer passed to the of_drm_find_bridge() call to find
the next bridge in the display chain.
The code to find the next panel (and create its panel-bridge) works
fine, but to find the next (non-panel) bridge does not.
To find the next bridge in the pipeline, we need to pass "np" - the OF
node pointer of the next entity in the devicetree chain. Passing
"of_node" to of_drm_find_bridge (which is what the code does currently)
will fetch the bridge for the cdns-dsi which is not what's required.
Fix that.
Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-2-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
drm_dp_dpcd_read_link_status() follows the "return error code or number
of bytes read" protocol, with the code returning less bytes than
requested in case of some errors. However most of the drivers
interpreted that as "return error code in case of any error". Switch
drm_dp_dpcd_read_link_status() to drm_dp_dpcd_read_data() and make it
follow that protocol too.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-2-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The Cadence DSI driver follows the drm_encoder->crtc pointer that is
deprecated and shouldn't be used by atomic drivers.
Fortunately, the atomic hooks provide the drm_atomic_state and we can
access our current CRTC from that, going from the bridge to its encoder,
to its connector, and to its CRTC.
Let's convert this bridge driver to atomic so we can get rid of the
drm_encoder->crtc dereference.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-12-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_disable hook prototype to pass
it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_enable hook prototype to pass it
directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
If the clock mhdp->clk was not enabled in cdns_mhdp_probe(), it should not
be disabled in any path.
The return value of clk_prepare_enable() is not checked. If mhdp->clk was
not enabled, it may be disabled in the error path of cdns_mhdp_probe()
(e.g., if cdns_mhdp_load_firmware() fails) or in cdns_mhdp_remove() after
a successful cdns_mhdp_probe() call.
Use the devm_clk_get_enabled() helper function to ensure proper call
balance for mhdp->clk.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: fb43aa0acdfd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214154632.1907425-1-mordan@ispras.ru
|
|
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b9f ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
