| Age | Commit message (Collapse) | Author |
|
Corrupt EEPROM data can set tbl_size below the table header size.
Guard the RAS_NUM_RECS macros against undersized tbl_size and reset
the table during init when tbl_size is below the minimum for the table
version instead of trusting the header.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return RAS TA injection result to userspace that avoid
app continue to load work once injection failed.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Drop new entries once pending_ecc_count hits RAS_UMC_PENDING_ECC_MAX
(8192) so an ECC storm or repeated UMC error injection cannot exhaust
kernel memory. Dropped events are counted and reported via a
rate-limited warning.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
return error when converting records to nps pages fails
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
check the upper and lower limits of first record offset
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When generating ras cper file, the original data nodes in the ras
log ring buffer may be deleted, leading to invalid pointer
access. Copy the data from the ras log ring instead of directly
referencing the pointers to avoid this issue.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add length check for ras command output buffer.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove unused code.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add error handling for seqno operations.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use mutex to prevent concurrent access conflicts.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Bound CPER record fetch allocation by buffer size.
v2: Drop redundant cap on cper_num and raise
GET_CPER_RECORD max buffer size.
Suggested-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The SMU EEPROM read paths pass byte-sized record field addresses
to mca_ipid_parse(), whose outputs are u32 pointers.
Writing through those widened pointers can clobber adjacent fields
and bytes beyond the record storage.
Parse the IPID values into local u32 temporaries instead, then
explicitly narrow the values when storing them in the EEPROM record.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add NULL checks for helper input/output pointers that are directly
dereferenced, such as tm, seqno, dev_info and init_config.
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some ras core helper functions access ras_core and its callback
table (sys_fn) without validating them first.
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ras_umc_log_pending_bad_bank() walks through a list of pending ECC
bad-bank entries. These entries are saved when a bad-bank error cannot
be processed immediately, for example during a GPU reset.
Later, this function iterates over the pending list and retries logging
each bad-bank error. If logging succeeds, the entry is removed from the
list and the memory for that node is freed.
The loop uses list_for_each_entry_safe(), which already guarantees that
ecc_node points to a valid list entry while the loop body is executing.
Checking "ecc_node &&" inside the loop is therefore unnecessary and
redundant.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_umc.c:225 ras_umc_log_pending_bad_bank() warn: variable dereferenced before check 'ecc_node' (see line 223)
Fixes: 7a3f9c0992c4 ("drm/amd/ras: Add umc common ras functions")
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ras_core_get_utc_second_timestamp() retrieves the current UTC timestamp
(in seconds since the Unix epoch) through a platform-specific RAS system
callback and is used for timestamping RAS error events.
The function checks ras_core in the conditional statement before calling
the sys_fn callback. However, when the condition fails, the function
prints an error message using ras_core->dev.
If ras_core is NULL, this can lead to a potential NULL pointer
dereference when accessing ras_core->dev.
Add an early NULL check for ras_core at the beginning of the function
and return 0 when the pointer is not valid. This prevents the
dereference and makes the control flow clearer.
Fixes: 13c91b5b4378 ("drm/amd/ras: Add rascore unified interface function")
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes a NULL pointer dereference when ras_core is NULL and ras_core->dev
is accessed in the error path.
Fixes: 13c91b5b4378 ("drm/amd/ras: Add rascore unified interface function")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
adapt sync info func for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add check func for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add initialization func for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
read bad page data from pmfw eeprom when retirement
is triggered, use timestamp read from eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add read func for pmfw eeprom, and adapt address converting
for bad pages loaded from pmfw eeprom
v2: change label 'Out' to 'out'
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add a new IPID parse interface for umc, so we can
implement it for each ASIC, and so we can call it
in other blocks
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add append func for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add check safety watermark func for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add table reset func for pmfw eeprom, add smu eeprom control
structure
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add wrapper funcs for pmfw eeprom interface to make them
easier to be called
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add flag to indicate if pmfw eeprom is supported or
not, and initialize it
v2: change copyright from 2025 to 2026
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add smu interfaces and its data structures for
pmfw eeprom in uniras
v2: add 'const' to smu messages array, and specify
index for each member when initializing.
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Warning: drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_eeprom.c:845 function parameter 'ras_core' not described in 'ras_eeprom_append'
Warning: drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_eeprom.c:845 expecting prototype for ras_core_eeprom_append(). Prototype was for ras_eeprom_append() instead
Fixes: 5c3be5defc92 ("drm/amd/ras: Add eeprom ras functions")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Forcing an int to be dereferenced at uint64_t for div64_u64_rem() runs
the risk of endian confusion and stack overflowing writes. Seen while
preparing to enable -Warray-bounds globally:
In file included from ../arch/x86/include/asm/processor.h:35,
from ../include/linux/sched.h:13,
from ../include/linux/ratelimit.h:6,
from ../include/linux/dev_printk.h:16,
from ../drivers/gpu/drm/amd/amdgpu/../ras/ras_mgr/ras_sys.h:29,
from ../drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras.h:27,
from ../drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_core.c:24:
In function 'div64_u64_rem',
inlined from 'ras_core_convert_timestamp_to_time' at ../drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_core.c:72:9:
../include/linux/math64.h:56:20: error: array subscript 'u64 {aka long long unsigned int}[0]' is partly outside array bounds of 'int[1]' [-Werror=array-bounds=]
56 | *remainder = dividend % divisor;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_core.c: In function 'ras_core_convert_timestamp_to_time':
../drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_core.c:70:19: note: object 'remaining_seconds' of size 4
70 | int days, remaining_seconds;
| ^~~~~~~~~~~~~~~~~
Use a 64-bit type for the remainder calculation, but leave
remaining_seconds as 32-bit to avoid 64-bit division later. The value of
remainder will always be less than seconds_per_day, so there's no
truncation risk.
Fixes: ace232eff50e ("drm/amdgpu: Add ras module files into amdgpu")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add convert retired address command and structure
for uniras.
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add address check command and data structure
for uniras.
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Report xgmi training error uncorrectable error count.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace AMDGPU_NPS8_PARTITION_MODE with
UMC_MEMORY_PARTITION_MODE_NPS8 to pass sriov
compilation.
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support physical address convert to current NPS
pages in uniras.
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add vram_type to ras_ta_init_flags.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ras_umc_handle_bad_pages() function used a large local array:
struct eeprom_umc_record records[MAX_ECC_NUM_PER_RETIREMENT];
Move this array off the stack by allocating it with kcalloc()
and freeing it before return.
This reduces the stack frame size of ras_umc_handle_bad_pages()
and avoids the frame size warning.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../ras/rascore/ras_umc.c:498:5: warning: stack frame size (1208) exceeds limit (1024) in 'ras_umc_handle_bad_pages' [-Wframe-larger-than]
v2: Removed the duplicate ras_umc_get_new_records() invocation. (Lijo)
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support high-frequency querying sriov ras block error count:
1. Create shared memory and fills it with RAS_CMD__GET_LAL_LOC_STATUS
ras command.
2. The RAS_CMD_GET_ALL_BLOCK_ECC_STATUS command and shared
memory are registered to sriov host ras auto-update list
via RAS_CMD_SET_CMD_AUTO_UPDATE command.
3. Once sriov host detects ras error, it will automatically execute
RAS_CMD__GET_ALL_BLOCK_ECC_STATUS command and write the result to
shared memory.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
During gpu reset, all GPU-related resources are
inaccessible. To avoid affecting ras functionality,
suspend ras module before gpu reset and resume
it after gpu reset is complete.
V2:
Rename functions to avoid misunderstanding.
V3:
Move flush_delayed_work to amdgpu_ras_process_pause,
Move schedule_delayed_work to amdgpu_ras_process_unpause.
V4:
Rename functions.
V5:
Move the function to amdgpu_ras.c.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ras support for umc v12_5_0.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ras support for nbio v7_9_1.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
../ras/rascore/ras_cper.c: In function ‘cper_generate_fatal_record.isra’:
../ras/rascore/ras_cper.c:75:36: error: ‘%llX’ directive output may be truncated writing between 1 and 14 bytes into a region of size between 0 and 7 [-Werror=format-truncation=]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~
../ras/rascore/ras_cper.c:75:32: note: directive argument in the range [0, 72057594037927935]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~
../ras/rascore/ras_cper.c:75:9: note: ‘snprintf’ output between 4 and 27 bytes into a destination of size 9
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
76 | RAS_LOG_SEQNO_TO_BATCH_IDX(trace->seqno));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../ras/rascore/ras_cper.c: In function ‘cper_generate_runtime_record.isra’:
../ras/rascore/ras_cper.c:75:36: error: ‘%llX’ directive output may be truncated writing between 1 and 14 bytes into a region of size between 0 and 7 [-Werror=format-truncation=]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~
../ras/rascore/ras_cper.c:75:32: note: directive argument in the range [0, 72057594037927935]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~
../ras/rascore/ras_cper.c:75:9: note: ‘snprintf’ output between 4 and 27 bytes into a destination of size 9
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
76 | RAS_LOG_SEQNO_TO_BATCH_IDX(trace->seqno));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The severity of CPER for BP threshold exceed event should be set as
FATAL to match the OOB implementation.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct valid_bits and ms_chk_bits of section info field for bad page
threshold exceed CPER to match OOB's behavior.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The IPID register value for bad page threshold CPER holds socket_id info
now according to the latest definition.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update function and remove redundant code:
1. Update function to prepare for internal use.
2. Remove unused function code previously prepared
for ioctl.
V2:
Update commit message content.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
According to the actual usage of this structure,
it is more appropriate to call it context, the
structure name with ioctl is easy to cause
misunderstanding.
V2:
Update commit message content.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|