| Age | Commit message (Collapse) | Author |
|---|
|
There were two mistakes in the previous implementation:
The check for AutomaticDCTransition should be inverted.
We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the smu7_apply_state_adjust_rules() function selects
different limits on AC and DC.
Fixes: 96da0d86614e ("drm/amd/pm/smu7: Notify SMU7 of DC->AC switch")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 516f8fc30a1b56af03f39e93c18707d13419fb1f)
Cc: stable@vger.kernel.org
|
|
The old radeon driver has a documented workaround in ci_dpm.c
which claims that Bonaire 0x6658 with old memory controller
firmware is unstable with MCLK DPM, so as a precaution I
disabled MCLK DPM on this ASIC in amdgpu.
Note that the old MC firmware is not actually used with
amdgpu, but in theory it's possible that the VBIOS sets
up the ASIC with an old MC firmware that is already running
when amdgpu initializes (in which case amdgpu doesn't
load its own firmware).
What I expected to happen is that the GPU would simply use
its maximum memory clock, and indeed this is what seemed
to happen according to amdgpu_pm_info which reads the
current MCLK value from the SMU.
However, some users reported a huge perf regression
and upon a closer look it seems that the GPU seems to
not actually use the highest MCLK value, despite the SMU
reporting that it does.
Let's not disable MCLK DPM on Bonaire 0x6658 (R7 260X).
Keep MCLK DPM disabled on R9 M380 in the 2015 iMac
because that still hangs if we enable it.
Fixes: 9851f29cb06c ("drm/amd/pm/ci: Disable MCLK DPM on problematic CI ASICs")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d34acad064ee7d82bd18f5d87592c422d4d323ac)
Cc: stable@vger.kernel.org
|
|
Use kcalloc() so multiplication overflow is detected
and allocation fails safely for phm table copy helpers.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The powerplay path allocates hardcode_pp_table once with kmemdup(...,
soft_pp_table_size). memcpy(..., size) used the sysfs store count (up to
PAGE_SIZE) with no upper bound, causing heap overflow. Reject
writes where size exceeds soft_pp_table_size.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When ATOM_PP_PLATFORM_CAP_HARDWAREDC is set,
the SMU has a GPIO pin for detecting AC/DC switch
and everything works automatically.
Otherwise when there is no GPIO pin, the SMU can
automatically detect switching to DC, but needs
to be notified of switching to AC.
Use PPSMC_MSG_RunningOnAC to notify the SMC
when switching to AC.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Not needed anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It was not used by anything anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This function was effectively a no-op because it always
returned the maximum possible power level, because the
maximum voltage is in millivolts while the dependency
table didn't contain actual voltages.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These implementations did not actually return
the DAL power level, so they were effectively
a no-op.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Was not called from anywhere.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Align the hawaii mclk workaround with radeon and windows.
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/1816
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The ci_populate_all_memory_levels() workaround only
applies to revision 0 SKUs.
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/1816
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smu7_hwmgr_backend_init() is responsible for initializing the SMU7 power
management backend. It allocates and sets up the backend structure,
initializes voltage tables, configures dependency tables, and prepares
platform-specific power and clock parameters.
The function follows a typical pattern where each initialization step
returns a status in "result", and failures are handled via a common
"goto fail" path that performs cleanup.
Commit 2c21648bb814 ("drm/amd/pm/smu7: Remove non-functional SMU7
voltage dependency on DAL") removed a function call in this
initialization sequence, but left behind the corresponding error check.
As a result, "result" is checked twice without being updated in between:
result = smu7_init_voltage_dependency_on_display_clock_table(hwmgr);
if (result)
goto fail;
...
if (result)
goto fail;
The second check is redundant and unreachable for any new failure, since
no operation modifies "result" between the two checks. This triggers a
Smatch warning about a duplicate zero check and reduces code clarity.
Remove the stale error check to keep the control flow correct and
readable.
Fixes: 9f49e3d4cb86 ("drm/amd/pm/smu7: Remove non-functional SMU7 voltage dependency on DAL")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On a specific Radeon R9 390X board, the GPU can "randomly" hang
while gaming. Initially I thought this was a RADV bug and tried
to work around this in Mesa:
commit 8ea08747b86b ("radv: Mitigate GPU hang on Hawaii in Dota 2 and RotTR")
However, I got some feedback from other users who are reporting
that the above mitigation causes a significant performance
regression for them, and they didn't experience the hang on their
GPU in the first place.
After some further investigation, it turns out that the problem
is that the highest SCLK DPM level on this board isn't stable.
Lowering SCLK to 1040 MHz (from 1070 MHz) works around the issue,
and has a negligible impact on performance compared to the Mesa
patch. (Note that increasing the voltage can also work around it,
but we felt that lowering the SCLK is the safer option.)
To solve the above issue, add an "sclk_cap" field to smu7_hwmgr
and set this field for the affected board. The capped SCLK value
correctly appears on the sysfs interface and shows up in GUI
tools such as LACT.
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In ci_populate_dw8() we currently just read a value from the SMU
and then throw it away. Instead of throwing away the value,
we should use it to fill other fields in DW8 (like radeon).
Otherwise the value of the other fiels is just cleared when
we copy this data to the SMU later.
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Follow what radeon did and what amdgpu does for other GPUs with SMU7.
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is no AMD GPU with the ID 0x66B0, this looks like a typo.
It should be 0x67B0 which is actually part of the PCI ID list,
and should use the Hawaii XT powertune defaults according to
the old radeon driver.
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It looks like this was written for an old version of DC (DAL)
and was never adapted afterwards. This was non-functional
because it relied on the "dal_power_level" field which was
never assigned anywhere in the code base.
Also, it was not implemented for CI ASICs.
Now superseded by the newer voltage dependency on display
clock table added by the previous commit, let's remove.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The DCE (display controller engine) requires a minimum voltage
in order to function correctly, depending on which clock level
it currently uses.
Add a new table that contains display clock frequency levels
and the corresponding required voltages. The clock frequency
levels are taken from DC (and the old radeon driver's voltage
dependency table for CI in cases where its values were lower).
The voltage levels are taken from the following function:
phm_initializa_dynamic_state_adjustment_rule_settings().
Furthermore, in case of CI, call smu7_patch_vddc() on the new
table to account for leakage voltage (like in radeon).
Use the display clock value from amd_pp_display_configuration
to look up the voltage level needed by the DCE. Send the
voltage to the SMU via the PPSMC_MSG_VddC_Request command.
The previous implementation of this feature was non-functional
because it relied on a "dal_power_level" field which was never
assigned; and it was not at all implemented for CI ASICs.
I verified this on a Radeon R9 M380 which previously booted to
a black screen with DC enabled (default since Linux 6.19), but
now works correctly.
Fixes: 599a7e9fe1b6 ("drm/amd/powerplay: implement smu7 hwmgr to manager asics with smu ip version 7.")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are two known cases where MCLK DPM can causes issues:
Radeon R9 M380 found in iMac computers from 2015.
The SMU in this GPU just hangs as soon as we send it the
PPSMC_MSG_MCLKDPM_Enable command, even when MCLK switching is
disabled, and even when we only populate one MCLK DPM level.
Apply workaround to all devices with the same subsystem ID.
Radeon R7 260X due to old memory controller microcode.
We only flash the MC ucode when it isn't set up by the VBIOS,
therefore there is no way to make sure that it has the correct
ucode version.
I verified that this patch fixes the SMU hang on the R9 M380
which would previously fail to boot. This also fixes the UVD
initialization error on that GPU which happened because the
SMU couldn't ungate the UVD after it hung.
Fixes: 86457c3b21cb ("drm/amd/powerplay: Add support for CI asics to hwmgr")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When MCLK DPM is disabled for any reason, populate the MCLK
table with the highest MCLK DPM level, so that the ASIC can
use the highest possible memory clock to get good performance
even when MCLK DPM is disabled.
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The drm_*() macros include the device which is helpful for debugging
issues in multi-GPU systems.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use emit_clock_levels instead of print_clock_levels
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move to emit_clock_levels from print_clock_levels
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move to emit_clock_levels from print_clock_levels
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Keep only emit_clock_levels, and remove print_clock_levels.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move to emit_clock_levels from print_clock_levels
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move to emit_clock_levels from print_clock_levels
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move to emit_clock_levels from print_clock_levels
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1:
- make pp_table invisible on VF mode (only valid on BM)
- make pp_table invisible on Mi* chips (Not supported)
- make pp_table invisible if scpm feature is enabled.
v2:
move pp_table invisible code logic into amdgpu_dpm_get_pp_table() function.
v3:
add table buffer pointer check both on powerplay & swsmu.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove amdgpu_asic_flush_hdp & amdgpu_asic_invalidate_hdp functions and
directly use the mapped ones
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18aafc59b106 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18edef19ea44 ("drm/amd/powerplay: implement fw image related smu interface for Fiji.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When passed around internally the upper 8 bits of power limit include
the limit type. This is non-obvious without digging into the nuances
of each function. Instead pass the limit type as an argument to all
applicable layers.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Unnecessary headers can slow down the build, drop em.
No intended functional changes.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Tested-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove extra multiplication.
CIK GPUs such as Hawaii appear to use PP_TABLE_V0 in which case
the shutdown temperature is hardcoded in smu7_init_dpm_defaults
and is already multiplied by 1000. The value was mistakenly
multiplied another time by smu7_get_thermal_temperature_range.
Fixes: 4ba082572a42 ("drm/amd/powerplay: export the thermal ranges of VI asics (V2)")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1676
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit is necessary for DC to function well with chips
that use the legacy power management code, ie. SI and KV.
Communicate display information from DC to the legacy PM code.
Currently DC uses pm_display_cfg to communicate power management
requirements from the display code to the DPM code.
However, the legacy (non-DC) code path used different fields
and therefore could not take into account anything from DC.
Change the legacy display code to fill the same pm_display_cfg
struct as DC and use the same in the legacy DPM code.
To ease review and reduce churn, this commit does not yet
delete the now unneeded code, that is done in the next commit.
v2:
Rebase.
Fix single_display in amdgpu_dpm_pick_power_state.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use int instead of uint32_t for 'ret' variable to store negative error
codes or zero returned by other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code. Swap variable positions
on either side of '==' to enhance readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code. Swap variable positions
on either side of '!=' to enhance readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a small typo in phm_wait_on_indirect_register().
Swap mask and value arguments provided to phm_wait_on_register() so that
they satisfy the function signature and actual usage scheme.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
In practice this doesn't fix any issues because the only place this
function is used uses the same value for the value and mask.
Fixes: 3bace3591493 ("drm/amd/powerplay: add hardware manager sub-component")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
"ENABLE" is currently misspelled in SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS
PS: checkpatch.pl is complaining about the presence of a space at the
start of drivers/gpu/drm/amd/include/atomfirmware.h line: 1716
This is propably because this file uses (two) spaces and not tabs.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smu7_copy_bytes_from_smc() was added in 2016 by
commit 1ff55f465103 ("drm/amd/powerplay: implement smu7_smumgr for asics
with smu ip version 7.")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
atomctrl_initialize_mc_reg_table
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb519 ("drm/amd/pp: Use atombios api directly in powerplay (v2)")
Fixes: 5f92b48cf62c ("drm/amd/pm: add mc register table initialization")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c52dcf49195d ("drm/amd/pp: Avoid divide-by-zero in fan_ctrl_set_fan_speed_rpm")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
