| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
mod_hdcp_dump_binary_message() computed target_size (a uint32_t) as roughly
byte_size * msg_size and gated the whole write on buf_size >= target_size. A
large msg_size can overflow target_size, wrapping it to a small value that
passes the check while the loop still writes byte_size * msg_size bytes
into buf. All current callers pass small constants so this is not reachable
today, but the unchecked arithmetic should be hardened.
[How]
Drop the overflow-prone target_size precomputation and instead bounds-check the
output position on every iteration, stopping once the next entry would not leave
room for the trailing terminator. This cannot overflow and, for oversized
messages, dumps as much as fits rather than printing nothing.
Fixes: 4c283fdac08a ("drm/amd/display: Add HDCP module")
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d0a775e5d70b376696245a14c09e3aa6dde0023a)
Cc: stable@vger.kernel.org
|
|
Add descriptions for the missing parameters for ALLMEnabled and
ALLMValue to keep the function documentation synchronized with the
function prototype mod_build_hf_vsif_infopacket().
Fixes the below with gcc W=1:
../display/modules/info_packet/info_packet.c:507 function parameter 'ALLMEnabled' not described in 'mod_build_hf_vsif_infopacket'
../display/modules/info_packet/info_packet.c:507 function parameter 'ALLMValue' not described in 'mod_build_hf_vsif_infopacket'
Fixes: 3c2381b92cba ("drm/amd/display: add support for VSIP info packet")
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The HDCP module has a minor update for FRL, and info_packet is
updated for ALLM.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Must use an alternative codepath to access AUX channel when
link->no_ddc_pin is set.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
Fixes: eff682f83c9c ("drm/amd/display: Add DDC handles for HDCP2.2")
Assisted-by: Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
module
[Why]
Extract all Replay related functions from power.c and
power_helpers.c into a new power_replay.c module for
better code organization and maintainability.
[How]
Create new power_replay.c file containing
Replay-related functions moved from power.c
and power_helpers.c . Update mod_power.h with
function declarations. Maintain forward
declaration for type compatibility.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Extract all PSR (Panel Self Refresh) related functions from power.c
into a new power_psr.c module for better code organization and
maintainability.
[How]
Create new power_psr.c file containing all PSR-related functions
moved from power.c. Remove static qualifier from shared functions
to enable cross-file access:
- psr_context_to_mod_power_psr_context: Convert PSR context to
module power PSR context
- map_index_from_stream: Map stream to power entity index
- delay_two_frames: Wait for two frame periods
Add function declarations to header. Maintain forward declaration of struct
core_power for type compatibility.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
warnings were triggered by enum forward declarations that are not
valid in C++ without an explicit underlying type.
[How]
- Replace problematic enum forward declarations with C++-safe forms where
applicable.
- Use plain integer types for interface-only declarations that do not
require strong enum typing.
- Update dependent winterface signatures and related type usage
consistently.
- Add required include and type-visibility fixes to avoid follow-on parse
and type-resolution issues.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Improves code organization by separating Adaptive Backlight
Modulation functionality from general power management.
This modular approach enhances maintainability and makes the
codebase easier to navigate.
[How]
Create new power_abm.c file containing all ABM-related functions moved from power.c.
Remove static qualifier from shared functions to enable cross-file access:
- initialize_backlight_caps: Initialize backlight capabilities
- validate_ext_backlight_caps: Validate external backlight capabilities
- backlight_millipercent_to_pwm: Convert brightness percent to PWM
- backlight_millipercent_to_millinit: Convert brightness percent to nits
- fill_backlight_level_params: Populate backlight level parametersAdd function
declarations to mod_power.h header. Update CMakeLists.txt to include power_abm.c in build.
Maintain forward declaration of struct core_power for type compatibility.
Rename struct core_power field from 'public' to 'mod_public'.
Move internal structures (backlight_state, backlight_properties,
dmcu_varibright_cached_properties, core_power) to power_helpers.h to
ensure consistent memory layouts across compilation units.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Fix various warnings related to unsigned/signed mismatches
- Consistently use the same signedness for a given value
- Explcitly cast between types when needed
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Unreachable Code;
Copy Constructor Deleted;
Local Declaration Hides Parameter;
Local Declaration Hides Outer Scope;
Uninitialized or Suspicious Memory Use.
[How]
- Removed or refactored unreachable code paths
- Ensured proper copy constructors in C++ classes
- Renamed local variables that shadowed function parameters
- Renamed inner loop/block variables to avoid shadowing outer scope
Fixed in 8 files across several FPU layers
Also fixed in color_gamma and cs_funcs modules
- Reordered guard conditions to validate pipe type before accessing stream
- Ensures safe memory access patterns in DC DMUB service layer
All changes maintain backward compatibility and preserve functional behavior.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
fix refresh rate round up case
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Address signed/unsigned comparison warnings across dc paths to keep
builds warning-clean and improve type safety at comparison boundaries.
Most warnings came from signed loop/index temporaries compared against
unsigned counters and table sizes, plus a smaller number of mixed
signed/unsigned clock, bandwidth, and geometry comparisons.
[How]
Aligned loop/index and bound types in the affected modules and DMUB
sources, including color, freesync, power, stats, and vmid paths.
Used unsigned iterators where bounds/counters are unsigned, preserved
signed types where negative values are meaningful, and updated related
format specifiers where type changes required it. Changes are limited to
warning resolution and type alignment.
No functional behavior change is intended.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
'struct backlight_properties' in power.c has the same name as the kernel's
struct defined in <linux/backlight.h>. In out-of-tree backport build
environments, the header is forcefully injected via command-line includes,
causing a redefinition error.
[How]
Rename the file-local 'struct backlight_properties' to
'pwr_backlight_properties' to avoid the name collision. No functional
change.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
calc_psr_num_static_frames() divides by vsync_rate_hz before checking
whether it is zero:
frame_time_microsec = 1000000 / vsync_rate_hz;
This can trigger a divide-by-zero bug if an invalid refresh rate is
passed in.
Rewrite the calculation to directly compute the number of frames needed
for at least 30 ms using DIV_ROUND_UP(). This avoids the invalid divisor
and removes the temporary frame_time_microsec calculation.
Keep the existing fallback behavior of 2 static frames when
vsync_rate_hz is zero.
Fixes: 4cef2ac4c795 ("drm/amd/display: Introduce power module on Linux")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Ray Wu <ray.wu@amd.com>
Cc: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] drm/amd/display had implicit integer narrowing at protocol/storage boundaries
and an incomplete eDP assignment in integrated info parsing.
[How] Apply explicit boundary casts for intentional narrowing, keep intermediate math
in wider types, and restore explicit eDP field mapping in v2.2 parser.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Other OS supported by DC uses the power module to manage panel power
features such as backlight and self-refresh. It contains enhancements
on top what amdgpu_dm is doing today that can benefit power.
[How]
Introduce the power module. It's currently not being used anywhere, a
future change will incorporate it into amdgpu_dm.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]: Implicit narrowing of wider integer types (unsigned int, uint64_t)
into narrower fields (uint8_t, uint16_t, unsigned short) has potential
truncation issues.
[How]: For each warning site, added ASSERT(<value> <= 0xFFFF/0xFF) for
debug-mode bounds verification followed by an explicit cast. Typed
intermediate variables introduced where needed for clarity.
No functional change intended.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Also affects: freesync, hdcp, info_packet, power
[Why] Resolve compiler warnings by marking unused parameters explicitly.
[How] In .c/.h keep parameter names in signatures and add a line with
`(void)param;` inside the function body
Preserved function signatures and avoids breaking code paths that
may reference the parameter under conditional compilation.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
[WHAT]
Check NULL before accessing link, not after.
This is reported as a REVERSE_INULL error by Coverity.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
The set_replay_frame_skip_number() function should not execute when
the link does not support the Frame Skipping feature.
[HOW]
Add a new field `frame_skip_supported` to struct replay_config to
indicate whether the link supports frame skipping. Check this flag
at the beginning of set_replay_frame_skip_number() and return early
if the feature is not supported.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WAHT]
Add vsc sdp header setting for Panel Replay.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
VESA Panel Replay requires AS-SDP v2 support.
Need to add checking flow to enable AS-SDP v2 in this case.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
1.Add flow to enable and configure panel replay enablement and
configuration
2.Add registry key for enable option
3.Add replay version check to be compatible with freesync replay
4.Add AC/DC switch function to notify ac/dc change.
5.Add flow in set event function to check and decide Replay
enable/disable
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add missing part for
drm/amd/display: fw locality check refactors
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
The change is to optimize the Replay power saving by
reducing the refresh rate with frame skipping mode
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Chuntao Tso <chunttso@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When changing resolution (e.g., 4K → FHD) in mirror/clone mode with
certain monitors, the monitor blanks and loses connection due to an early
exit in vrr_settings_require_update(). The function only checks if VRR
state, fixed refresh target, or min/max refresh rate range has changed.
During mode changes, if the calculated min/max refresh values remain the
same even though the stream's v_total changed, the function returns early
without updating vrr_params.adjust.v_total_min/max, leaving the monitor's
VRR timing parameters unsynced with the new mode, causing it to blank out.
[How]
Explicitly adjust VRR parameters to the stream's nominal v_total when VRR
is supported, but inactive.
Fixes: 6d31602a9f57 ("drm/amd/display: more liberal vmin/vmax update for freesync")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Adding macros to simplify the process of adding new error codes.
Currently, to add an error code, the developer needs to add both the
enum and the string translation. This is error prone and can lead to
inconsistencies. The refactor adds a macro to automatically add the
string translation based on the enum.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
There are some new changes for HDCP2 firmware locality check. The
implementation doesn't perfectly fit the intended design and clarity.
1. Clarify and consolidate variable responsibilities.
The previous implementation introduced the following variables:
- config.ddc.funcs.atomic_write_poll_read_i2c (optional pointer)
- hdcp->config.ddc.funcs.atomic_write_poll_read_aux (optional pointer)
- hdcp->connection.link.adjust.hdcp2.force_sw_locality_check (bool)
- hdcp->config.debug.lc_enable_sw_fallback (bool)
- use_fw (bool)
They will be used together to determine two operations:
- Whether to use FW locality check
- Whether to use SW fallback on FW locality check failure
The refactor streamlines this by introducing two variables in the hdcp2
link adjustment, while ensuring function pointers are always assigned
and remain independent from policy decisions:
- use_fw_locality_check (bool) -> true if fw locality should be used.
- use_sw_locality_fallback (bool) -> true to reset use_fw_locality_check
back to false and retry on fw locality check failure.
2. Mixed meanings of l_prime_read transition input
l_prime_read originally means if l_prime is read when sw locality check
is used. When FW locality check is used, l_prime_read means if lc init
write, l prime poll and l_prime read combo operation is successful. The
mix of meanings is confusing. The refactor introduces a new variable
l_prime_combo_read to isolate the second meaning into its own variable.
3. Missing specific error code on firmware locality error.
The original change reuses the generic DDC failure error code when
firmware fails to return locality check result. This is not ideal as
DDC failure indicates an error occurred during an I2C/AUX transaction.
FW locality failure could be caused by polling timeout in firmware or
failure to acquire firmware access. Which sits at a higher level of
abstraction above DDC hardware. An incorrect error code could mislead
the debug into a wrong direction.
4. Correcting misplaced comments. The previous implementation of the
firmware locality check resulted in some comments in hdcp2_transition
being incorrectly positioned. This refactor relocates those comments to
their appropriate locations for better clarity.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Current hdcp trace only tracks hdcp errors. We need to expand the trace
structure for more tracing information.
[how]
Add following traces for hdcp1:
- attempt_count
- downstream_device_count
Add following traces for hdcp2:
- attempt_count
- downstream_device_count
- hdcp1_device_downstream
- hdcp2_legacy_device_downstream
Reviewed-by: Sung Lee <sung.lee@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DM should be able to control HDCP retry limit via configurable
parameter.
[How]
Expose a retry_limit parameter for controlling the maximum number of
retries and lift the hardcode out to DM.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false" or
"a ? false : true", if 'a' itself returns a boolean result, the ternary
operator can be omitted. Remove redundant ternary operators to clean up the
code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function mod_hdcp_hdcp1_create_session() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference.
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.
This is similar to the commit c3e9826a2202
("drm/amd/display: Add null pointer check for get_first_active_display()").
Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SmartMux is a mechanism to switch the GPU being used for scanout in a
hybrid configuration. This is used for devices with an eDP and two GPUs.
This is only valid when the system has a physical switch (Multiplexer)
in the board to switch between the two GPUs.
When a graphically intensive workload like a game is being run, the
system can be switch the active display to the dGPU, so that we can
avoid copying the buffer from dGPU to APU for scanout. This helps with
latency and FPS. When power consumption is preferred, the system can be
switched to the APU.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Rounding error sometimes occurs when the refresh rate is equal to a panel's
max refresh rate, causing HDMI compliance failures.
[HOW]
Added a case so that we round up to avoid v_total_min to be below a panel's
minimum bound.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Harold Sun <Harold.Sun@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Found that we add redundant macro on refresh rate when calculating vtotal,
so we remove it.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Weiguang Li <wei-guang.li@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function mod_hdcp_hdcp1_enable_encryption() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference in
mod_hdcp_hdcp2_enable_encryption().
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.
Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # v5.8
|
|
[Why]
HDCP locality check has strict timing requirements, currently broken
due to reliance on msleep which does not guarantee accuracy.
The PR moves the write-poll-read sequence into DMUB using new generic
Fused IO interface, where the timing accuracy is greatly improved.
New flow is enabled using DCN resource capability bit (none for now),
or using a debug flag.
[How]
* Extended mod_hdcp_config with new function for requesting DMUB
to execute a sequence of fused I2C/AUX commands and synchronously
wait until an outbox reply arrives or a timeout expires.
* If the timeout expires, send an abort to DMUB.
* Update HDCP to use the DMUB for locality check if supported.
* Add DC_HDCP_LC_FORCE_FW_ENABLE and DC_HDCP_LC_ENABLE_SW_FALLBACK.
* Make the first enable new flow regardless of resource capabilities.
* Make the second enable fallback to old SW flow.
* Clean up makefile source file listings for easier updates.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
BT2020 YCbCr input is not handled properly when full range
quantization is used and limited range is not supported at all.
[How]
- Add enums for BT2020 YCbCr limited/full range
- Add limited range CSC matrix
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mod_freesync_get_vmin_vmax() and mod_freesync_get_v_position() were
added in 2017 by
commit 72ada5f76939 ("drm/amd/display: FreeSync Auto Sweep Support")
mod_freesync_is_valid_range() was added in 2018 by
commit e80e94460841 ("drm/amd/display: add method to check for supported
range")
mod_freesync_get_settings() was added in 2018 by
commit a3e1737ed61c ("drm/amd/display: Implement stats logging")
and
mod_freesync_calc_field_rate_from_timing() was added in 2020 by
commit 49c70ece54b0 ("drm/amd/display: Change input parameter for
set_drr")
None of these have been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
Revised Replay Full screen video Pseudo vblank control.
Reviewed-by: Allen Li <allen.li@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Build-up get/reset desync error count interface and implement the functions.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 0f5ac8c8e275
Due to a replay regression.
Fixes: 0f5ac8c8e275 ("drm/amd/display: Revised for Replay Pseudo vblank control")
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Revised Replay Full screen video Pseudo vblank control.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Hardware does not support the VTotal to be between fp2 lines of the
maximum possible VTotal, so add a capability flag to track it and apply
where necessary.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Code reading rxstatus message size was incorrectly assigning it to
uint8_t, despite the value being 10 bits long (lower byte plus lowest
2 bits from upper byte). This caused the highest 2 bits to be ignored,
potentially missing invalid values.
[How]
Change all local variables holding rxstatus message size from uint8_t
to uint16_t, as in mod_hdcp_message_hdcp2::rx_id_list_size.
Replaced untyped HDCP_2_2_HMID_RXSTATUS_MSG_SZ_HI macro with function
hdcp_2_2_hmid_rxstatus_msg_sz(const uint8_t[2]) to encapsulate entire
calculation and return a typed result.
Removed spaces mixed with tabs to fix indentation on modified lines.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
