summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/include
AgeCommit message (Collapse)Author
2026-06-04drm/amd/display: Fix DCN42B version detectionMatthew Stewart
In resource_parse_asic_id, the check for GC_11_0_4 was unbounded, which caused it to override the detection of DCN42B. Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-03drm/amd/display: Add HDMI FRL definitions to includesHarry Wentland
This patch adds all relevant includes in DC that are used by the HDMI FRL implementation in DC. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-03drm/amd/display: Add DCN42B code to DCMatthew Stewart
[Why & How] Add DCN42B code to DC Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-03drm/amd/display: Add no_native_i2c codepathMatthew Stewart
[Why] ASICs which do not have native DDC capability must use a different codepath to access the AUX channel. [How] - BIOS cap NO_DDC_PIN is set to 1 for links which do not have the DDC pin. - dp_connector_no_native_i2c in dc_config must also be set to true to use this codepath. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-27drm/amd/display: Delete disp_clk_voltage from integrated info (v2)Timur Kristóf
Only DCE 11.0 relies on this information and even that didn't use this field, because it queries the information from the pplib. It also filled the field incorrectly on that version. On newer GPUs, the VIOS integrated info no longer contains display clock voltage dependencies, so we don't need it. v2: - Also delete some code wrapped in #if 0 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-11drm/amd/display: Fix warningsClay King
[Why & How] Fix various warnings related to unsigned/signed mismatches - Consistently use the same signedness for a given value - Explcitly cast between types when needed Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-29drm/amd/display: Read EDID from VBIOS embedded panel infoTimur Kristóf
Some board manufacturers hardcode the EDID for the embedded panel in the VBIOS. This EDID should be used when the panel doesn't have a DDC. For reference, see the legacy non-DC display code: amdgpu_atombios_encoder_get_lcd_info() This is necessary to support embedded connectors without DDC. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192 Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit eb105e63b474c11ef6a84a1c6b18100d851ff364)
2026-04-17drm/amd/display: Adjust freesync pcon whitelistWayne Lin
Add more freesync supported pcon ID into the whitelist. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-11drm/amd/display: Add ESD detection for replay recoveryWeiguang Li
[HOW] Add Replay recovery flow so that when HPD occurs and ESD is detected, Replay can restore the system back to normal. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Weiguang Li <wei-guang.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-23drm/amd/display: Implement BIOS parser external encoder controlTimur Kristóf
The VBIOS has a function called ExternalEncoderControl which controls the DP bridge encoders that some GPUs use for analog and LVDS output. Fixup this old functionality. For reference, see the legacy non-DC amdgpu display code: amdgpu_atombios_encoder_setup_external_encoder() - Set same parameters for the ENABLE action as the SETUP action - Add missing enum values for DDC setup and DAC load detection - Fix the bits per color field - Clarify the code that sets the link rate - Expose the function so that it can be called by rest of DC A subsequent commit will call this function from DCE HWSS. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-23drm/amd/display: Add dcn42 version identifiersRoman Li
Add DCN 4.2 asic version identifiers. Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-27drm/amd/display: Add FR skipping CTS functionsJack Chang
1. To check whether Sink reaches maximum skipping number Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10drm/amd/display: PR error HPD_IRQ handlingJack Chang
[Why & How] Add error handling for IRQ_HPD in Panel Replay Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10drm/amd/display: DPCD for Selective UpdateJack Chang
[Why&How] Add flow to read selective update related info from DPCD, and pass the info to DMUB. Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05drm/amd/display: Correct color depth for SelectCRTC_SourceTimur Kristóf
Pass the correct enum values as expected by the VBIOS. Previously the actual bit depth integer value was passed, which was a mistake. Fixes: 7fb4f254c8eb ("drm/amd/display: Add SelectCRTC_Source to BIOS parser") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-16drm/amd/display: Support DRR granularityWeiguang Li
[Why&How] Support DRR granularity for coasting Vtotal calculation Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Weiguang Li <wei-guang.li@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: shrink struct membersRosen Penev
On a 32-bit ARM system, the audio_decoder struct ends up being too large for dp_retrain_link_dp_test. link_dp_cts.c:157:1: error: the frame size of 1328 bytes is larger than 1280 bytes [-Werror=frame-larger-than=] This is mitigated by shrinking the members of the struct and avoids having to deal with dynamic allocation. feed_back_divider is assigned but otherwise unused. Remove both. pixel_repetition looks like it should be a bool since it's only ever assigned to 1. But there are checks for 2 and 4. Reduce to uint8_t. Remove ss_percentage_divider. Unused. Shrink refresh_rate as it gets assigned to at most a 3 digit integer value. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Add panel replay enablement option and logicJack Chang
[Why&How] 1.Add flow to enable and configure panel replay enablement and configuration 2.Add registry key for enable option 3.Add replay version check to be compatible with freesync replay 4.Add AC/DC switch function to notify ac/dc change. 5.Add flow in set event function to check and decide Replay enable/disable Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28drm/amd/display: Add DAC_LoadDetection to BIOS parser (v2)Timur Kristóf
DAC_LoadDetection can be used to determine whether something is connected to an analog connector by determining if there is an analog load. This causes visible flickering on displays, so we only resort to using this when the connected display doesn't have an EDID. For reference, see the legacy display code: amdgpu_atombios_encoder_dac_load_detect v2: Only clear corresponding bit from BIOS_SCRATCH_0. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28drm/amd/display: Don't use stereo sync and audio on RGB signals (v2)Timur Kristóf
Analog video signals on VGA or DVI-A (analog part of DVI-I) don't support audio, so avoid calling any audio related functions on analog signals. Stereo sync was not set up for analog signals in the legacy display code either, so there is no loss of functionality if we omit it from DC for now. Also add a dc_is_rgb_signal similar to other dc_is_*_signal. v2: Added comment to clarify what we mean by RGB in this context. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28drm/amd/display: Get maximum pixel clock from VBIOSTimur Kristóf
We will use this for validating the pixel clock when an analog monitor is connected to VGA or DVI-I connectors. For reference, see the legacy display code: amdgpu_connector_vga_mode_valid Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28drm/amd/display: Add SelectCRTC_Source to BIOS parserTimur Kristóf
The SelectCRTC_Source command will be used to change which CRTC should be connected to which encoder. For reference, see the legacy display code: amdgpu_atombios_encoder_set_crtc_source Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28drm/amd/display: Add analog bit to edid_caps (v2)Timur Kristóf
The new analog bit will be used with DVI-I connectors. DVI-I connectors can connect to both digital and analog monitors and this bit will help distinguish between those. v2: Sanitize analog bit based on connector type. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-04drm/amd/display: add more cyan skillfish devicesAlex Deucher
Add PCI IDs to support display probe for cyan skillfish family of SOCs. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-22drm/amdgpu: fixing typo in macro nameJihed Chaibi
"ENABLE" is currently misspelled in SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS PS: checkpatch.pl is complaining about the presence of a space at the start of drivers/gpu/drm/amd/include/atomfirmware.h line: 1716 This is propably because this file uses (two) spaces and not tabs. Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-13drm/amd/display: Add early 8b/10b channel equalization test pattern sequenceMichael Strauss
[WHY] Early EQ pattern sequence is required for some LTTPR + old dongle combinations. [HOW] If DP_EARLY_8B10B_TPS2 chip cap is set, this new sequence programs phy to output TPS2 before initiating link training and writes TPS1 to LTTPR training pattern register as instructed by vendor. Add function to get embedded LTTPR target address offset. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: TungYu Lu <tungyu.lu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Implement HDMI Read RequestChris Park
[Why] Read Request provides alterative method to polling to the HDMI sinks that support it. [How] Implement Read Request where interrupt can be generated by the sink. Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-05drm/amdgpu: Remove unused pre_surface_traceDr. David Alan Gilbert
pre_surface_trace() has been unused since 2017's commit 745cc746da42 ("drm/amd/display: remove dc_pre_update_surfaces_to_stream from dc use") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Add DCN36 version identifiersWayne Lin
Add DCN3.6 asic identifiers. Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Add new log type `DC_LOG_INFO`Mario Limonciello
`DC_LOG_INFO` will wrap `drm_info()` and be used for the typical `INFO` level printk messages but in DC code. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250120194903.1048811-3-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Remove last parts of timing_traceDr. David Alan Gilbert
Commit c2c2ce1e9623 ("drm/amd/display: Optimize passive update planes.") removed the last caller of context_timing_trace. Remove it. With that gone, no one is now looking at the 'timing_trace' flag, remove it and all the places that set it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: Read Sink emission rate capabilityRobin Chen
[WHY] To get sink emission rate information for future supported refresh rate calculation. Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Add logs to record register read/writePaul Hsieh
[Why] There are some issues which customer only can provide full dump for analyze, without register history, it's hard to debug HW status. [How] 1. Put register read/write into WPP log so we can trace the logs from full memory dump. 2. MALL doesn't add into WPP, add it. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Add more logging for MALL static screenAurabindo Pillai
[why & how] print additional info for MALL related calculations and DMCUB messaging to aid debugging. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Revert Avoid overflow assignmentGabe Teeger
This reverts commit a15268787b79 ("drm/amd/display: Avoid overflow assignment in link_dp_cts") Due to regression causing DPMS hang. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Avoid overflow assignment in link_dp_ctsAlex Hung
sampling_rate is an uint8_t but is assigned an unsigned int, and thus it can overflow. As a result, sampling_rate is changed to uint32_t. Similarly, LINK_QUAL_PATTERN_SET has a size of 2 bits, and it should only be assigned to a value less or equal than 4. This fixes 2 INTEGER_OVERFLOW issues reported by Coverity. Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: remove dc dependencies from SPL librarySamson Tam
[Why] Make SPL library dc-independent so it can be reused by other components [How] Create separate set of fixed31_32 calls in SPL Make all inputs and outputs to SPL use primitive types For ratios and inits, return as uint32 from SPL. So add conversion from uint32 back to fixed point in SPL-to-dc translate function Reviewed-by: Relja Vojvodic <relja.vojvodic@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-05Merge v6.10-rc6 into drm-nextDaniel Vetter
The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-06-25drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is presentMichael Strauss
[WHY] New register field added in DP2.1 SCR, needed for auxless ALPM [HOW] Echo value read from 0xF0007 back to sink Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-29drm/amd/display: fix graphics_object_id sizeArnd Bergmann
The graphics_object_id structure is meant to fit into 32 bits, as it's passed by value in and out of functions. A recent change increased the size to 128 bits, so it's now always passed by reference, which is clearly not intended and ends up producing a compile-time warning: drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c: In function 'construct_phy': drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:743:1: error: the frame size of 1040 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Add back the bitfields to revert to the original size, while keeping the 'enum' type change. Fixes: fec85f995a4b ("drm/amd/display: Fix compiler redefinition warnings for certain configs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-13drm/amd/display: Refactor dcn401_update_clocksDillon Varone
[WHY & HOW] Refactor complex code into manageable functions. This also cleans up some updating logics. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Add misc DC changes for DCN401Aurabindo Pillai
Add miscellaneous changes to enable DCN401 init Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Remove redundant include fileAlex Hung
This fixes 1 PW.INCLUDE_RECURSION reported by Coverity. "./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_types.h" includes itself: dc_types.h -> dal_types.h -> dc_types.h Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-12drm/amd/display: Add a function for checking tmds modeChris Park
[Why] DVI is TMDS signal like HDMI but without audio. Current signal check does not correctly reflect DVI clock programming. [How] Define a new signal check for TMDS that includes DVI to HDMI TMDS programming. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Fix compiler redefinition warnings for certain configsMounika Adhuri
[why & how] Modified definitions of 1 function and 2 structs to remove warnings on certain specific compiler configurations due to redefinition. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add comments to v_total calculation and drop legacy TODORodrigo Siqueira
[WHY & HOW] This commit just adds some simple comments to help understand the calculation of V total duration for Freesync. Also, remove a legacy TODO comment from link service type. Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add debug prints for IPS testingNicholas Kazlauskas
[WHY] To log commit states and when we transition in/out of allow and idle states and the caller. [HOW] Add a new logging helper and wrap idle optimization calls to receive the caller. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DCN351 version identifiersHamza Mahfooz
Add DCN3.5.1 ASIC identifiers. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-14drm/amd/display: Update FIXED_VS Retimer HWSS Test Pattern SequencesMichael Strauss
[WHY] Need to fix some broken logic and sequencing in initial commit [HOW] Fix logic handling override deprogramming when exiting SQ128. Don't exit early from dp_set_hw_lane_settings for DP2/FIXED_VS case. Move LTTPR 128b/132b check out of requires_hwss and check during runtime, as LTTPR caps are not populated on initial call. Add pending_test_pattern to link state to allow HWSS to set FFE overrides on retimer TX and/or skip setting APU TX FFE depending on requested pattern. Use updated clock source for SQ128 override sequence. Skip HW FFE preset programming when performing test pattern overrides. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-15drm/amd/display: Add DP audio BW validationGeorge Shen
[Why] Timings with small HBlank (such as CVT RBv2) can result in insufficient HBlank bandwidth for audio SDP transmission when DSC is active. This will cause some higher bandwidth audio modes to fail. The combination of CVT RBv2 timings + DSC can commonly be encountered in MST scenarios. [How] Add DP audio bandwidth validation for 8b/10b MST and 128b/132b SST/MST cases and filter out modes that cannot be supported with the current timing config. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-07-19 17:33:36 +0000