summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/optc
AgeCommit message (Collapse)Author
2026-08-06drm/amd/display: Fix CRC engine 1 enable/disable on DCN3.1.2+Wayne Lin
[Why] Multi-ROI CRC uses OTG_CRC1_EN for the second engine, but the driver only toggled OTG_CRC_EN and cleared the whole OTG_CRC_CNTL register on disable. [How] Program engine 1 via OTG_CRC1_EN where supported, disable each engine independently by crc_eng_inst, and add the missing mask on relevant DCN ASICs. Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-08-06drm/amd/display: Add missing OTG_CRC1_SELECT mask for DCN3.2Wayne Lin
[Why] Configuring CRC engine 1 via optc35_configure_crc() triggers ASSERT(mask != 0) in dc_helper.c when programming OTG_CRC1_SELECT. The DCN3.2 OPTC mask list inherited from dcn32 is missing this field, so ROI[1] CRC cannot be enabled in DisplayCRC mode on DCN3.5/3.51. [How] Add OTG_CRC1_SELECT to OPTC_COMMON_MASK_SH_LIST_DCN3_2, matching the existing dcn10 definition so REG_UPDATE can program CRC engine 1. Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-08-06drm/amd/display: Enable DCN6 sources compilationAurabindo Pillai
- Add hooks in various entry points to perform hw/sw init for DCN6 asic - Add dependent changes needed to enable DCN6 asic - Update the Makefiles so that DCN6 related newly added sources are compiled Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-08-06drm/amd/display: Add new sources for DCN6Aurabindo Pillai
Add DCN6 code to DC, DML2, and DMUB Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-17drm/amd/display: Deprecate DMUB register offload functionalityAustin Zheng
[Why] The DMUB register offload feature should no longer be used. This was originally a debug feature for DCN21. No longer applicable to the DMUB programming model. [How] Remove DMUB register offload infrastructure including helper functions, structures, debug options, and register sequence macros. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-03drm/amd/display: add HDMI 2.1 DSC over FRL supportHarry Wentland
Add all the bits to enable DSC over FRL. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-03drm/amd/display: Add DCCG DIO, HPO, OPP, and OPTC support for FRLHarry Wentland
This adds support to HW block programming for the core blocks for HDMI FRL: - DIO - HPO - OPP - OPTC Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-03drm/amd/display: Add DCN42B code to DCMatthew Stewart
[Why & How] Add DCN42B code to DC Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-19drm/amd/display: Enable additional wait for pipe pending checksAric Cyr
[why] In cases where there are two FULL updates within the same display frame, it's possible for some blocks to be programmed a second time without having been latched completely from the first programming. DCN 3.5 and up already work around this with additional validation checks for frame count and defer as needed via fsleep. [how] Enabled existing pipe checks generically for all DCN versions to avoid HW programming hazards. Also removed redundant max_frame_count which can be determined by the register mask and shift. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-11drm/amd/display: Fix warningsClay King
[Why & How] Fix various warnings related to unsigned/signed mismatches - Consistently use the same signedness for a given value - Explcitly cast between types when needed Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-05drm/amd/display: Fix type mismatches using guards and explicit castsGaghik Khachatrian
[Why] Address signed/unsigned comparison warnings across dc paths to keep builds warning-clean and improve type safety at comparison boundaries. Most warnings came from signed loop/index temporaries compared against unsigned counters and table sizes, plus a smaller number of mixed signed/unsigned clock, bandwidth, and geometry comparisons. [How] Aligned iterator and temporary variable types with the semantic type of the compared bounds. Used unsigned indices for loops bounded by unsigned counters and table sizes, while retaining signed types where values are semantically signed or participate in arithmetic that may legitimately go negative. Where mixed signed/unsigned comparisons are intentional, applied explicit boundary casts or guarded comparisons instead of broad type changes. No functional behavior changes are intended; this is a warning-resolution and type-alignment cleanup. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Remove SYMCLK F and G values from link encoder and ↵Andrew Lichmanov
MANUAL_FLOW_CONTROL from optc [WHY] Definitions were removed by HW from new headers. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Andrew Lichmanov <Andrew.Lichmanov@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Fix implicit narrowing conversion warningsGaghik Khachatrian
[Why] Multiple display source files contain implicit narrowing conversions when assigning wider integer types (int, uint32_t) to narrower fields (uint8_t, uint16_t) at hardware register, protocol, and storage boundaries. These conversions are intentional but undocumented, and accompanying runtime assertions add noise without providing compile-time safety. [How] Add explicit casts at all intentional narrowing boundaries across display source files. Use narrower loop variable types where loop bounds guarantee safe range. Remove runtime assertions paired with narrowing casts, inline single-use intermediate variables, and revert block scopes and braces introduced solely to contain those assertions. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-30drm/amd/display: Fixed Silence complier warnings in dcGaghik Khachatrian
[Why] Resolve compiler warnings by marking unused parameters explicitly. [How] In .c and .h function definitions, keep parameter names in signatures and add a line with `(void)param;` in function body Preserved function signatures and avoids breaking code paths that may reference the parameter under conditional compilation. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-11drm/amd/display: Sync dcn42 with DC 3.2.373Roman Li
This patch provides a bulk merge to align driver support for DCN42 with Display Core version 3.2.373. It includes upgrade for: - clk_mgr - dml2/dml21 - optc - hubp - mpc - optc - hwseq Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-11drm/amd/display: Update underflow detectionCharlene Liu
[WHY] Add underflow detection for later ASICs. Reviewed-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-23drm/amd/display: Enable dcn42 DCRoman Li
Add support for DCN 4.2 in Display Core Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-23drm/amd/display: Add dcn42 DC resourcesRoman Li
Display Core resources for DCN 4.2: - CLK_MGR - DCCG - DIO - DPP - GPIO - HPO - HUBBUB - HUBP - HWSS - IRQ - MMHUBBUB - MPC - OPTC - PG Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Expose functions of other dcn useDmytro Laktyushkin
[Why & HOw] Expose some functions for later dcns to reuse Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-03drm/amd/display: Add CRC 32-bit mode support for DCN3.6+Chenyu Chen
[Why] DCN 3.6+ hardware supports CRC-32 polynomial in addition to the legacy CRC-16. Enable 32-bit CRC values per color component for improvement of precision in display validation. [How] When userspace sets crc_poly_mode (0=CRC-16, 1=CRC-32) via the debugfs interface, the value is stored in dm_irq_params.crc_poly_mode. When CRC source configuration triggers amdgpu_dm_crtc_configure_crc_source(), crc_poly_mode is retrieved from dm_irq_params and passed to dc_stream_configure_crc(). In the DC layer, dc_stream_configure_crc() sets crc_poly_mode into the crc_params structure and passes it to optc35_configure_crc(). If the hardware supports the OTG_CRC_POLY_SEL register, the register is programmed to select CRC-16 or CRC-32 polynomial. When reading CRC values, optc35_get_crc() checks whether CRC32 register masks are available. If present, it reads 32-bit CRC values from OTG_CRC0/1_DATA_R32/G32/B32 registers; otherwise, it falls back to reading 16-bit CRC values from legacy OTG_CRC0/1_DATA_RG/B registers. Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28drm/amd/display: Add more DC HW state info to underflow loggingKaren Chen
[Why] Debugging underflow issues frequently requires knowing the HW state at the time of underflow. To enable capturing this HW state information, interface functions are needed for the various DC HW blocks. [How] This change adds the interface functions to read HW state for the following DC HW blocks: - HUBBUB - HUBP - DPP - MPC - OPP - DSC - OPTC - DCCG Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Karen Chen <Karen.Chen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: wait for otg update pending latch before clock optimizationYihan Zhu
[WHY & HOW] OTG pending update unlatched will cause system fail, wait OTG fully disabled to avoid this error. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-11drm/amd/display: Wait until OTG enable state is clearedTungYu Lu
[Why] Customer reported an issue that OS starts and stops device multiple times during driver installation. Frequently disabling and enabling OTG may prevent OTG from being safely disabled and cause incorrect configuration upon the next enablement. [How] Add a wait until OTG_CURRENT_MASTER_EN_STATE is cleared as a short term solution. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: TungYu Lu <tungyu.lu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-29drm/amd/display: Constify struct timing_generator_funcsChristophe JAILLET
'struct timing_generator_funcs' are not modified in these drivers. Constifying these structures moves some data to a read-only section, so increases overall security, especially when the structure holds some function pointers. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: wait for updates to latch before lockingAusef Yousof
[why&how] It is possible for an update to acquire otg lock and begin programming while the previous update has not completed and its values have not latched. The correct way to go about this is to wait until the vupdate pulses so we can be sure that previous updates have latched and we can continue with the current update pipe programming, otherwise during consecutive full updates we will have corruption flash on the screen. The corruption flash occurs specifically on configs that require odm combine, and its local to a specific pipe (will not flash across whole screen). This ticket is across the otg slave, but it may also appear across master. Reviewed-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Refactor DCN4x and related codePatel, Swapnil
[why & how] Refactor existing code related to DCN4x for better code sharing with other modules. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Allow reuse of of DCN4x codeDmytro
Remove the static qualifier to make it available for code sharing with other components. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Dmytro <dmytro.laktyushkin@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: log destination of vertical interruptJosip Pavic
[Why] Knowing the destination of OTG's vertical interrupt 2 is useful for debugging, but it is not currently included in the OTG state readback logic [How] Read the OTG interrupt destination register to get the vertical interrupt 2 destination on ASICs that have this register when reading back the OTG state from hardware Reviewed-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add support to configure CRC window on specific CRC instanceWayne Lin
[Why] Have the need to specify the CRC window on specific CRC engine. dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always resets CRC engine at first. [How] Add index parameter to dc_stream_configure_crc() for selecting the desired crc engine. Additionally, add another parameter to specify whether to skip the default reset of crc engine. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: DML2.1 Post-Si CleanupRafal Ostrowski
[Why] There are a few cleanup and refactoring tasks that need to be done with the DML2.1 wrapper and DC interface to remove dependencies on legacy structures and N-1 prototypes. [How] Implemented pipe_ctx->global_sync. Implemented new functions to use pipe_ctx->hubp_regs and pipe_ctx->global_sync: - hubp_setup2 - hubp_setup_interdependent2 - Several other new functions for DCN 4.01 to support newer structures Removed dml21_update_pipe_ctx_dchub_regs Removed dml21_extract_legacy_watermark_set Removed dml21_populate_pipe_ctx_dlg_param Removed outdated dcn references in DML2.1 wrapper. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rostrows@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Extend dc_stream_get_crc to support 2nd crc engineWayne Lin
[Why & How] Since now we can set multiple crc windows for secure display, add a new input parameter for dc_stream_get_crc to indicate to fetch crc from which crc engine. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Add support for FAMS2+ interface versionsDillon Varone
Current driver interface does not allow for flexibility in coexistence of multiple interface versions, so add support for checking minor interface revisions and providing appropriate programming. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: Add 3DLUT FL HW bug workaroundIlya Bakoulin
[Why] There is a known HW bug that causes the internal 3DLUT fetch signal to be lost at VREADY, regardless of whether the OTG lock is being held or not. A workaround is necessary to make sure that this internal signal stays up after OTG unlock. [How] Set the 3DLUT_ENABLE bit immediately before and after the unlock. Also use VUPDATE_KEEPOUT to prevent lock transition in the region between VSTARTUP and VREADY, which could cause issues with this WA sequence. Also including misc. 3DLUT DMA-related sequence fixes to address a few regressions causing corruption. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Wait for all pending cleared before full updateAlvin Lee
[Description] Before every full update we must wait for all pending updates to be cleared - this is particularly important for minimal transitions because if we don't wait for pending cleared, it will be as if there was no minimal transition at all. In OTG we must read 3 different status registers for pending cleared, one specifically for OTG updates, one specifically for OPTC updates, and the last for surface related updates. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: restore immediate_disable_crtc for w/aCharlene Liu
[why] immediate_disable_crtc does not reset ODM. if switching to disable_crtc which will disable ODM as well. i.e. need to restore ODM mem cfg at reenable it at end of w/a. Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Add 'pstate_keepout' kdoc entry in 'optc1_program_timing'Srinivasan Shanmugam
Fixes the below with gcc W=1: Function parameter or struct member 'pstate_keepout' not described in 'optc1_program_timing' Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Add P-State Keepout to dcn401 Global SyncDillon Varone
[WHY&HOW] OTG has new functionality to allow P-State relative to VStartup. Keepout region for this should be configured based on DML outputs same as other global sync params. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-17drm/amd/display: fix corruption with high refresh rates on DCN 3.0Alex Deucher
This reverts commit bc87d666c05a13e6d4ae1ddce41fc43d2567b9a2 and the register changes from commit 6d4279cb99ac4f51d10409501d29969f687ac8dc. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3412 Cc: mikhail.v.gavrilov@gmail.com Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.10.x
2024-06-27drm/amd/display: Wait for double buffer update on ODM changesAlvin Lee
[WHAT & HOW] We must wait for ODM double buffer updates to complete before exiting the pipe update sequence or we may reduce DISPCLK and hit some transient underflow (pixel rate is reduced before the pipes have ODM enabled). Reviewed-by: Samson Tam <samson.tam@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: bypass ODM before CRTC offYihan Zhu
[WHY] OPPs couldn't disconnect from the ODM that cause the double buffer pending not being latched due to missing VUPDATE. [HOW] Moving memory blanking before OTG turn off to make sure double buffer latched correctly. Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Yihan Zhu <yihan.zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Updated optc401_set_drr to use dcn401 functionsRelja Vojvodic
why: optc_401_set_drr was using an old optc3 function to update vtotal min and max, causing crashes when disabling FAMS2 how: Updated dcn401 to point to opt401 function for vtotal updates. This version of the function has FAMS2 logic that allows for FAMS2 to be disabled. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Fix swapped dimension calculationsJoshua Aberback
[Why] The values calculated in optc1_get_otg_active_size are assigned to the wrong output parameters, vertical blank is being used for horizontal size and vice versa. This results in DPG test pattern looking wrong during hardware init, as the DPG dimensions get assigned from this output, and potentially other issues. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-17drm/amdgpu/display: Update kdoc for 'optc35_set_odm_combine'Srinivasan Shanmugam
The parameters segment_width and last_segment_width are used to control the configuration of the Output Plane Processor (OPP), specifically the width of each segment that the display is divided into and the width of the last segment Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Function parameter or struct member 'segment_width' not described in 'optc35_set_odm_combine' drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Function parameter or struct member 'last_segment_width' not described in 'optc35_set_odm_combine' drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Excess function parameter 'timing' description in 'optc35_set_odm_combine' Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-13drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe splitWenjing Liu
[WHY] Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM pipesplit is used, pixels on the left edge of ODM slices need one extra pixel from the right edge of the previous slice to calculate the correct chroma value. Without this change, the chroma value is slightly different than expected. This is usually imperceptible visually, but it impacts test pattern CRCs for compliance test automation. [HOW] Update logic to use the register for adding extra left edge pixel for YCbCr422/420 ODM cases. Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08drm/amd/display: reset DSC clock in post unlock updateWenjing Liu
[why] Switching between DSC clock or disable DSC block are not double buffered update. Corruption is observed if these updates happen before DSC double buffered disconnection. [how] Move DSC disable and refclk reset to post unlock update. Wait for DSC double buffered disconnection and all mpccs are disconnected before reset DSC clock. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: use even ODM slice width for two pixels per containerWenjing Liu
[why] When optc uses two pixel per container, each ODM slice width must be an even number. [how] If ODM slice width is odd number increase it by 1. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Address kdoc for 'Enable CRTC' in optc401_enable_crtcSrinivasan Shanmugam
This commit fixes the kdoc for 'Enable CRTC' in `optc401_enable_crtc` function. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn401/dcn401_optc.c:177: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Enable CRTC Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources") Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Add misc DC changes for DCN401Aurabindo Pillai
Add miscellaneous changes to enable DCN401 init Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Add some DCN401 reg name to macro definitionsAurabindo Pillai
Update macros to cover DCN 4.0.1. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Add new DCN401 sourcesAurabindo Pillai
Add initial support for DCN 4.0.1. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-07 17:20:29 +0000