summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/link/protocols
AgeCommit message (Collapse)Author
5 daysdrm/amd/display: fix division by zero in get_estimated_bw()Hari Mishal
get_estimated_bw() divides by link->dpia_bw_alloc_config.bw_granularity, which is zeroed by reset_bw_alloc_struct() and only populated once DP_TUNNELING_BW_ALLOC_CAP_CHANGED has been handled. link_dp_dpia_handle_bw_alloc_status(), the DPCD interrupt handler, calls get_estimated_bw() whenever DP_TUNNELING_ESTIMATED_BW_CHANGED is set, independently of whether DP_TUNNELING_BW_ALLOC_CAP_CHANGED has ever fired for that link. A connected USB4/DPIA tunneling device that reports an estimated-bandwidth change before ever reporting a capability change drives a division by zero in this IRQ path. link_dpia_send_bw_alloc_request() already guards the same bw_granularity division; add the identical guard here rather than introducing a new pattern. Fixes: 8e5cfe547bf3 ("drm/amd/display: upstream link_dp_dpia_bw.c") Reviewed-by: Alex Hung <alex.hung@amd.com> Assisted-by: gkh_clanker_t1000 Signed-off-by: Hari Mishal <harimishal1@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f2a961457c33dc34223aad5c9e8971de34a4eed3) Cc: stable@vger.kernel.org
2026-08-06drm/amd/display: Ensure dtbclk is enabledCharlene Liu
[why] ensure dtbclk is enabled before hdmistreamclk_en pmfw could stop dtbclk on idle. driver needs to ensure dtbclk enabled is enabled before hdmistreamclk_en also disable debounce timer on dcn42. Reviewed-by: Chris Park <chris.park@amd.com> Reviewed-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-08-06drm/amd/display: Enable DCN6 sources compilationAurabindo Pillai
- Add hooks in various entry points to perform hw/sw init for DCN6 asic - Add dependent changes needed to enable DCN6 asic - Update the Makefiles so that DCN6 related newly added sources are compiled Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-07-28drm/amd/display: Fix force FRL rate debug settingRelja Vojvodic
[Why & How] - force FRL rate debug bit was not correctly forcing requested FRL rate Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-07-28drm/amd/display: Fix DP LT failure loggingIlya Bakoulin
[Why/How] The final DP LT failure meant to be logged as DC warning is skipped due to a break statement above. Move logging up to make sure we don't miss LT fail events. Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-07-15drm/amd/display: remove duplicate link_dp_panel_replay.h includeAnas Khan
link_dp_irq_handler.c includes "link_dp_panel_replay.h" twice. Drop the redundant second include; this is a non-functional cleanup flagged by scripts/checkincludes.pl. Fixes: 1e5cd4adfc54 ("drm/amd/display: move panel replay out from edp") Signed-off-by: Anas Khan <anxkhn28@gmail.com> Reviewed-by: George Zhang <george.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-07-15drm/amd/display: Fix VABC Init and OLED SupportIswara Nagulendran
[Why] TCONs supporting VESA AUX Backlight does not always support VESA Smooth Brightness. Driver software needs to implement smooth brightness by periodically updating the brightness by small steps. Driver implementation is completed and verified on LCD panels but solution is missing for OLED panels. [How] Updated driver to include smooth brightness for OLED panels using VESA Aux Backlight. Revert original workaround for VABC on oled issue, as it is no longer needed. Add VABC backlight Initialization sequence from driver side. Add fix to remove conflict between FW and driver backlight programming for future ASIC. Enable VABC for all future asic revisions. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com> Signed-off-by: George Zhang <george.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-07-15drm/amd/display: Add dp_skip_rbr flag for NUTMEGTimur Kristóf
No functional changes. Just clean up a conceptual mismatch. Based on feedback on the NUTMEG code in DC, the preferred_link_setting is meant to force the DP link to a specific setting, meaning both the link rate and lane count should be locked to an exact value. What NUTMEG needs is a lower bound on the link rate, which is not the same concept. Implement this as a HW workaround flag instead. Suggested-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-07-15drm/amd/display: Fix preferred link rate for NUTMEGTimur Kristóf
When there is a preferred link rate setting, it needs to be applied to both the current and initial link rate. This was regressed by a "coding style" fix, which caused the current link rate to not respect the preferred value. This commit restores the functionality of NUTMEG, the DP bridge encoder found on old APUs such as Kaveri. Fixes: a62346043a89 ("drm/amd/display: Fix coding style issue") Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5465 Cc: Chuanyu Tseng <Chuanyu.Tseng@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-07-01drm/amd/display: Replace repeated no-native-i2c checks with ↵Wenjing Liu
force_i2c_over_aux field [Why] The compound condition checking dp_connector_no_native_i2c and no_ddc_pin was duplicated across many files, obscuring intent at every call site. [How] Add bool force_i2c_over_aux to struct dc_link, initialized once during link creation. Add link_get_ddc_aux_inst() helper to select the correct aux instance. Wire into link_service via construct_link_service_ddc(). Replace all duplicated condition checks and aux instance selection blocks with the new field and helper. No functional change. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Zhang <george.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-07-01drm/amd/display: Update link bwRelja Vojvodic
[Why & How] - Added link bw to switch case Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com> Signed-off-by: George Zhang <george.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-07-01drm/amd/display: Enable PSR and Replay on DCN4 variant and fix AUX instanceGabe Teeger
[Why] Enable PSR and Panel Replay on a DCN4 variant for display power savings. On links without native I2C (no DDC pin), the AUX channel must use aux_hw_inst to avoid NULL pointer access during PSR and Replay setup. [How] Enable PSR and Replay in the DCN4 variant panel config defaults. Add no_ddc_pin check in dp_setup_panel_replay(), edp_setup_freesync_replay(), and fsft_send_msg_to_fw() to use link->aux_hw_inst when dp_connector_no_native_i2c and no_ddc_pin are set. Reviewed-by: Matthew Stewart <matthew.stewart2@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: George Zhang <george.zhang@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-17drm/amd/display: Add PSR Active VTotal Control capabilityRobin Chen
[WHY] The PSRSU-RC capability should be populated in DC during edp detection. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-03drm/amd/display: add HDMI 2.1 DSC over FRL supportHarry Wentland
Add all the bits to enable DSC over FRL. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-03drm/amd/display: Add DC link support for FRLHarry Wentland
Start bringing in the protocol layer for FRL in DC link. This includes FRL training, timing validation, and other protocol bits. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-03drm/amd/display: Add no_native_i2c codepathMatthew Stewart
[Why] ASICs which do not have native DDC capability must use a different codepath to access the AUX channel. [How] - BIOS cap NO_DDC_PIN is set to 1 for links which do not have the DDC pin. - dp_connector_no_native_i2c in dc_config must also be set to true to use this codepath. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-06-03drm/amd/display: Enable frame skipping in 0x37BChuntao Tso
[Why & How] Enable frame skipping in 0x37B Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Chuntao Tso <chuntao.tso@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-19drm/amd/display: Add debug option for replay ESD recoveryWei-Guang Li
[Why&How] Add a new debug option "enable_replay_esd_recovery" to control whether to enable the replay ESD recovery feature. Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Wei-Guang Li <wei-guang.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-19drm/amd/display: Add Auxless-ALPM support in VESA Panel ReplayLeon Huang
[How] Add Auxless-ALPM data in VESA PR initialization Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-18drm/amd/display: Fix eDP receiver ready status check in T7 sequenceSung-huai Wang
[Why] Some eDP panels return sinkstatus as 0x5, causing the original sinkstatus == 1 check to never match and resulting in unnecessary polling delay. The equality check is too restrictive and doesn't properly validate the specific status bit that indicates receiver readiness. [How] Replace direct value comparison with proper bitmask check using DP_RECEIVE_PORT_0_STATUS constant. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Sung-huai Wang <Danny.Wang@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-11drm/amd/display: Refactor dc_link_aux_transfer_rawMatthew Stewart
[Why & How] The logic for choosing between the dce_aux_transfer function variants is moved into dce_aux.c rather than link_ddc.c. The "dce_aux_transfer_with_retries" function now uses dce_aux_transfer_raw in its implementation as the logic is equivalent. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-11drm/amd/display: Fix warningsClay King
[Why & How] Fix various warnings related to unsigned/signed mismatches - Consistently use the same signedness for a given value - Explcitly cast between types when needed Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-05-05drm/amd/display: Fix type mismatches using guards and explicit castsGaghik Khachatrian
[Why] Address signed/unsigned comparison warnings across dc paths to keep builds warning-clean and improve type safety at comparison boundaries. Most warnings came from signed loop/index temporaries compared against unsigned counters and table sizes, plus a smaller number of mixed signed/unsigned clock, bandwidth, and geometry comparisons. [How] Aligned iterator and temporary variable types with the semantic type of the compared bounds. Used unsigned indices for loops bounded by unsigned counters and table sizes, while retaining signed types where values are semantically signed or participate in arithmetic that may legitimately go negative. Where mixed signed/unsigned comparisons are intentional, applied explicit boundary casts or guarded comparisons instead of broad type changes. No functional behavior changes are intended; this is a warning-resolution and type-alignment cleanup. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Fix narrowing boundaries and eDP parser assignmentGaghik Khachatrian
[Why] drm/amd/display had implicit integer narrowing at protocol/storage boundaries and an incomplete eDP assignment in integrated info parsing. [How] Apply explicit boundary casts for intentional narrowing, keep intermediate math in wider types, and restore explicit eDP field mapping in v2.2 parser. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Add Replay/PSR active check in link loss status checkAllen Li
[Why&How] To avoid unnecessary link retraining when the panel is in Replay/PSR mode, we need to check if it's in active state and ESD information before we decide to retrain the link. Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Signed-off-by: Allen Li <allen.li@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Fix implicit narrowing conversion warningsGaghik Khachatrian
[Why] Multiple display source files contain implicit narrowing conversions when assigning wider integer types (int, uint32_t) to narrower fields (uint8_t, uint16_t) at hardware register, protocol, and storage boundaries. These conversions are intentional but undocumented, and accompanying runtime assertions add noise without providing compile-time safety. [How] Add explicit casts at all intentional narrowing boundaries across display source files. Use narrower loop variable types where loop bounds guarantee safe range. Remove runtime assertions paired with narrowing casts, inline single-use intermediate variables, and revert block scopes and braces introduced solely to contain those assertions. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Unset Replay desync error verification by defaultAllen Li
[Why & How] There will be an unexpected desync error while doing PSR -> Replay transit, so we want to disable the replay desync error detection by default. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Allen Li <allen.li@amd.com> Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-17drm/amd/display: Fix coding style issueChuanyu Tseng
[Why & How] Function logic should put after variable declare section, so let's move it. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-30drm/amd/display: Fixed Silence complier warnings in dcGaghik Khachatrian
[Why] Resolve compiler warnings by marking unused parameters explicitly. [How] In .c and .h function definitions, keep parameter names in signatures and add a line with `(void)param;` in function body Preserved function signatures and avoids breaking code paths that may reference the parameter under conditional compilation. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-11drm/amd/display: Enable dcn42 DC clk_mgrRoman Li
Add support for DCN 4.2 clock manager. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-11drm/amd/display: Clean up unused codeClay King
[WHAT] Silence warning by cleaning up unused code. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-11drm/amd/display: Add ESD detection for replay recoveryWeiguang Li
[HOW] Add Replay recovery flow so that when HPD occurs and ESD is detected, Replay can restore the system back to normal. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Weiguang Li <wei-guang.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-11drm/amd/display: Return early from vesa replay enable functionPeichen Huang
[WHY & HOW] If the enable state is already as expect then just return. Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-02drm/amd/display: Initialize replay_state to PR_STATE_INVALIDIvan Lipski
[WHY & HOW] Initialize the replay_state variable to PR_STATE_INVALID instead of PR_STATE_0 before retrieving the actual replay state. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-23drm/amd/display: Fix DPIA number and driver ID field issueCruise Hung
[Why] The DPIA number field is 6 bits in the spec. In dp_type, it only defines 5 bits. The driver ID is only 4 bits in the spec. [How] Set DPIA number field size to 6. And only update 4 bits for driver id. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-23drm/amd/display: Link detection for external DP bridge encodersTimur Kristóf
Deal with some minor idiosyncracies of TRAVIS and NUTMEG chips. - Always use DP signal type with these chips so that the normal DP code paths can work with them without a major refactor of the code base. Properly set this. - NUTMEG seems to only work with HBR, not RBR, so set a preferred link rate for this chip. See amdgpu_atombios_dp_get_dp_link_config() for reference. - NUTMEG is recognized as a DP branch device but reports 0 sinks, which is wrong and confuses DC (it hits an early return). Fix that by hardcoding the sink count to 1. - Fixup old DC code selecting a special panel mode necessary for NUTMEG and TRAVIS. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-23drm/amd/display: Use preferred DP link rate if specifiedTimur Kristóf
The DisplayPort code already has the concept of preferred link settings, but it only allows setting a preferred lane count and link width at the same time. It does not consider the possiblity that some devices may not work on lower link rates but may support various lane counts. Allow specifying a preferred link rate which will be used as the initial link rate when deciding the DP link settings. This is necessary to support NUTMEG which only works with HBR but not with RBR. For reference, see the legacy non-DC amdgpu display code: amdgpu_atombios_dp_get_dp_link_config() Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-12drm/amd/display: Make GPIO HPD path conditionalRoman Li
[Why] Avoid unnecessary GPIO configuration attempts on dcn that doesn't support it. [How] Conditionally use GPIO HPD detection or rely on hw encoder path. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: use enum value for panel replay settingPeichen Huang
[WHY & HOW] use enum value for Panel Replay setting. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: Check frame skip capability in Sink sideLeon Huang
[Why&How] Frame skip capability is described in AMD VSDB in EDID. Need to retrieve the cap and determine fr.skipping mode enablement Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-03drm/amd/display: External panel replay fsm controlPeichen Huang
[WHY] To correctly control external panel replay fsm. [HOW] 1. External panel replay is 1-A option only now. 2. Update cursor update and dirty rects commands for external panel replay support. 3. Add external panel replay support flag in dc. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-20drm/amd/display: panel inst for monitorsPeichen Huang
[WHY] To find proper panel replay panel inst for external monitors. [HOW] Use otg index as panel replay panel inst. Both Replay features use the same logic to get panel inst. Correct the bug that would overwrite panel inst in cmd Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10drm/amd/display: init code for external panel replayPeichen Huang
Prepare for supporting panel replay on external monitors. Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10drm/amd/display: revert "write default Vesa Aux backlight control in dmub"Derek Lai
This reverts commit 08f133e932cc. Commit causing backlight darker when the system wakes up from standby mode, and green screen w/ secondary screen only when the system wakes up from standby mode. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Derek Lai <Derek.Lai@amd.com> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10drm/amd/display: PR error HPD_IRQ handlingJack Chang
[Why & How] Add error handling for IRQ_HPD in Panel Replay Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10drm/amd/display: DPCD for Selective UpdateJack Chang
[Why&How] Add flow to read selective update related info from DPCD, and pass the info to DMUB. Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-10drm/amd/display: move panel replay out from edpPeichen Huang
[WHY] Panel Replay is not an eDP-specific function. [HOW] Create new Panel Replay source files and move the Panel Replay functions from the eDP files to the new files. Additionally, create a new link_service construct function to assign the related function pointers. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05drm/amd: Convert DRM_*() to drm_*()Mario Limonciello (AMD)
The drm_*() macros include the device which is helpful for debugging issues in multi-GPU systems. Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-08 01:47:05 +0000