| Age | Commit message (Collapse) | Author |
|---|
|
The slot lock is a bit operation on the whole __lock word, which flags and
ac_time alias as two u32s. On little-endian the lock bit lands in the
position ZRAM_ENTRY_LOCK reserves in flags, so the aliasing works out. On
64-bit big-endian it lands in ac_time instead: with
ZRAM_TRACK_ENTRY_ACTIME enabled, storing the access time from
mark_slot_accessed() or slot_free() wipes out the held lock bit, letting
another CPU take the same slot lock; an access time value with that bit
set makes the slot look locked forever.
Shift the lock bit into the flags half of the word on big-endian 64-bit.
Link: https://lore.kernel.org/20260810202241.2436603-1-devnexen@gmail.com
Fixes: 2e8ff2f51dde ("zram: use u32 for entry ac_time tracking")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
zram has always used "unsigned int" for (page) index calculations, which
unnecessarily limited max zram disksize.
Switch to "unsigned long" and permit much larger zram devices.
Link: https://lore.kernel.org/20260806031640.536615-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Co-developed-by: Longlong Xia <xialonglong2025@163.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
read_block_state() calculates nr_pages before taking dev_lock. If the
device is reset and reinitialized with a smaller disksize before lock
acquisition, nr_pages still describes the old table. The subsequent loop
can then call slot_lock() past the end of the newly allocated table.
Read disksize after acquiring dev_lock and checking that the device is
initialized. The read lock then keeps the table and its bound stable for
the duration of the scan.
Link: https://lore.kernel.org/20260804065919.3970386-3-xialonglong2025@163.com
Fixes: c0265342bff4 ("zram: introduce zram memory tracking")
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Longlong Xia <xialonglong@kylinos.cn>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "zram: fix stale scan bounds after reinitialization".
Both writeback_store() and read_block_state() derive their table scan
bounds from zram->disksize before acquiring dev_lock. If the device is
reset and reinitialized with a smaller disksize between that read and lock
acquisition, the bound can describe the old table while the scan operates
on the new one. This can lead to out-of-bounds slot accesses.
Move both bound calculations under dev_lock so each bound remains
consistent with the table throughout its scan. Keep the fixes separate
because the affected interfaces originate from different commits and can
be backported independently.
This patch (of 2):
writeback_store() calculates the table scan bounds before taking dev_lock.
A reset followed by reconfiguration with a smaller disksize can therefore
replace zram->table while writeback_store() is waiting for the lock. Once
it acquires the lock, it sees an initialized device but scans the new
table using the old upper bound, resulting in an out-of-bounds access.
Calculate the number of pages while holding dev_lock so the scan bound
matches the table protected by the lock.
Link: https://lore.kernel.org/20260804065919.3970386-1-xialonglong2025@163.com
Link: https://lore.kernel.org/20260804065919.3970386-2-xialonglong2025@163.com
Fixes: a939888ec38b ("zram: support idle/huge page writeback")
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Longlong Xia <xialonglong@kylinos.cn>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Parameters validated against one algorithm may be invalid for another
(e.g. lz4 accepts level=65535 but zstd does not). Although algorithm
changes are blocked after disksize is set, they are allowed before device
initialization. Reset per-priority params on algorithm change so that
stale parameters do not silently carry over.
Link: https://lore.kernel.org/20260804093841.67920-6-haoqinhuang7@gmail.com
Signed-off-by: Haoqin Huang <haoqinhuang@tencent.com>
Signed-off-by: Rongwei Wang <zigiwang@tencent.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Dict and level parameters are silently accepted even for backends that do
not support them. Validate these parameters in each backend's
.setup_params() to reject unsupported combinations and out-of-range levels
with a specific error message.
Link: https://lore.kernel.org/20260804093841.67920-5-haoqinhuang7@gmail.com
Signed-off-by: Haoqin Huang <haoqinhuang@tencent.com>
Signed-off-by: Rongwei Wang <zigiwang@tencent.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add pr_fmt to each backend so that pr_err() messages are auto-prefixed
with the algorithm name. While at it, tweak the deflate winbits pr_err to
avoid a duplicated "deflate" prefix.
Link: https://lore.kernel.org/20260804093841.67920-4-haoqinhuang7@gmail.com
Signed-off-by: Haoqin Huang <haoqinhuang@tencent.com>
Signed-off-by: Rongwei Wang <zigiwang@tencent.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kernel_read_file_from_path() already rejects empty files (i_size <= 0) and
returns -EINVAL, but the current implementation only checks for sz < 0
without logging any information. Use sz == 0 to reject the zero-size case
and print distinct error messages for each failure type.
Link: https://lore.kernel.org/20260804093841.67920-3-haoqinhuang7@gmail.com
Signed-off-by: Haoqin Huang <haoqinhuang@tencent.com>
Signed-off-by: Rongwei Wang <zigiwang@tencent.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "zram: fix zstd error paths and add parameter validation", v6,
Patch 1 removes zstd_release_params() from both zstd_create() and
zstd_setup_params() error paths -- the former is a layering violation
in a per-CPU callback, the latter is redundant as zcomp_init() already
calls release_params() on setup failure.
Patch 2 rejects zero-size dictionaries and prints distinct error
messages for sz < 0 (returns the original error code) and sz == 0
("empty file"). Currently errors are silently swallowed.
Patch 3 adds pr_fmt to each backend file so that pr_err() messages
are auto-prefixed with the algorithm name.
Patch 4 validates dict and level parameters in each backend's
.setup_params(), rejecting unsupported combinations and out-of-range
levels.
Patch 5 resets per-priority params on algorithm change before init.
This patch (of 5):
zstd_setup_params() creates global cdict and ddict stored in
params->drv_data, shared across all per-CPU contexts. The per-CPU
zstd_create() error path called zstd_release_params(), which freed those
globally-shared objects. This is a layering violation: a per-CPU callback
should only clean up its own context, not release resources owned by the
compression lifecycle.
zstd_setup_params() called zstd_release_params() on its own error path as
well, but zcomp_init() already calls release_params() when setup fails, so
this is redundant.
Remove zstd_release_params() from both error paths.
Link: https://lore.kernel.org/20260804093841.67920-1-haoqinhuang7@gmail.com
Link: https://lore.kernel.org/20260804093841.67920-2-haoqinhuang7@gmail.com
Signed-off-by: Haoqin Huang <haoqinhuang@tencent.com>
Signed-off-by: Rongwei Wang <zigiwang@tencent.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We must validate user-supplied deflate winbits before we pass it to
zlib_deflate_workspacesize(), which triggers BUG_ON() if winbits value is
outside of valid ranges.
Link: https://lore.kernel.org/20260729045745.775973-3-senozhatsky@chromium.org
Fixes: dc75a0d93bd5 ("zram: support deflate-specific params")
Link: https://sashiko.dev/#/patchset/20260728092935.31139-1-haoqinhuang7@gmail.com
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Haoqin Huang <haoqinhuang7@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "zram: fix zram issues reported by sashiko".
Sashiko drove by and reported [1] a couple of zram issues:
a possible BUG_ON() in zlib code due to missing winbits range
validation and one possible NULL-ptr dereference in zcomp.
Both are low risk yet still worth fixing.
This patch (of 2):
zram_destroy_comps() resets all compressors and leaves them set to NULL,
including the primary one, which is invalid device state, as now
comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set
default primary compressor in zram_destroy_comps().
Link: https://lore.kernel.org/20260729045745.775973-2-senozhatsky@chromium.org
Fixes: 486fd58af7ac ("zram: don't free statically defined names")
Link: https://sashiko.dev/#/patchset/20260728092935.31139-1-haoqinhuang7@gmail.com [1]
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Haoqin Huang <haoqinhuang7@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Each struct zram uses the same key for its struct lockdep_map which is
used for locking analysis.
According to Sergey the lock chains might be different if zram1 is used
for and zram2 is for ext4. This might lead to false dead lock reports if
it mixes a zram1 chain with a zram2. This can be avoided if each lockmap
gets its own unique key.c
Use a dynamic lock_class_key for the table_lock_map.
Link: https://lore.kernel.org/20260714141300.3945672-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "zram: lockmap tweaks".
This patch (of 2):
The zram object contains an array zram_table_entry. Each one has a `lock'
variable and each has a matching struct lockdep_map. This mimics a struct
mutex.
It uses always the same key for all lockdep_map instances. This makes it
look like the same lock to lockdep. Therefore it could be reduced to have
one lockdep_map per struct zram.
Use only one struct lockdep_map per struct zram.
Link: https://lore.kernel.org/20260714141300.3945672-1-bigeasy@linutronix.de
Link: https://lore.kernel.org/20260714141300.3945672-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
|
After "zram: fix use-after-free in zram_bvec_write_partial()",
zram_bvec_write_partial() always passes NULL to zram_read_page() and no
longer needs the parent bio. Mirror the read side
(zram_bvec_read_partial() has not taken a bio since commit 4e3c87b9421d
("zram: fix synchronous reads")) and drop the parameter from
zram_bvec_write_partial() and zram_bvec_write().
No functional change.
Link: https://lore.kernel.org/20260528-zram-v3-2-cab86eef8764@gmail.com
Signed-off-by: Cunlong Li <shenxiaogll@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "zram: writeback fixes", v2.
Brian (privately) reported a "leak" of writeback bitmap in certain cases,
so that backing device can store less pages; and a theoretical data leak
in the trailing bytes of compressed writeback pages. Both issues are low
risk.
This patch (of 2):
When compressed writeback is available writtenback pages contain "garbage"
in PAGE_SIZE - obj_size trailing bytes. That "garbage" is, basically,
whatever data that page held before we got it for writeback. To get
advantage of it an attacker needs to be able to read from active backing
swap device, which is already catastrophic. Still, just in case, zero out
those trailing bytes before writeback to a backing device so that we only
store swap-ed out data there.
Link: https://lore.kernel.org/20260526022754.2377730-1-senozhatsky@chromium.org
Link: https://lore.kernel.org/20260526022754.2377730-3-senozhatsky@chromium.org
Fixes: d38fab605c66 ("zram: introduce compressed data writeback")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Brian Geffon <bgeffon@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
zram_writeback_slots() loop can terminate with valid reserved backing
device blk_idx. The problem is that cleanup code doesn't release that
reserved blk_idx before zram_writeback_slots() returns, which leads to
blk_idx leak (it becomes permanently busy and can not be used for actual
writeback.) This does not lead to any system instabilities, it only means
that we can writeback less pages. The scenario is hard to hit in practice
as it requires writeabck to race with modification (slot-free or
overwrite) of the final post-processing slot.
Release reserved but unused blk_idx before returning from
zram_writeback_slots().
Link: https://lore.kernel.org/20260526022754.2377730-2-senozhatsky@chromium.org
Fixes: f405066a1f0db ("zram: introduce writeback bio batching")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Brian Geffon <bgeffon@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed.
Link: https://lore.kernel.org/20260528-zram-v3-1-cab86eef8764@gmail.com
Fixes: 8e654f8fbff5 ("zram: read page from backing device")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Cunlong Li <shenxiaogll@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A crash was observed in zram_writeback_endio due to a NULL pointer
dereference in wake_up. The root cause is a race condition between the
bio completion handler (zram_writeback_endio) and the writeback task.
In zram_writeback_endio, wake_up() is called on &wb_ctl->done_wait after
releasing wb_ctl->done_lock. This creates a race window where the
writeback task can see num_inflight become 0, return, and free wb_ctl
before zram_writeback_endio calls wake_up().
CPU 0 (zram_writeback_endio) CPU 1 (writeback_store)
============================ ============================
zram_writeback_slots
zram_submit_wb_request
zram_submit_wb_request
wait_event(wb_ctl->done_wait)
spin_lock(&wb_ctl->done_lock);
list_add(&req->entry, &wb_ctl->done_reqs);
spin_unlock(&wb_ctl->done_lock);
wake_up(&wb_ctl->done_wait);
zram_complete_done_reqs
spin_lock(&wb_ctl->done_lock);
list_add(&req->entry, &wb_ctl->done_reqs);
spin_unlock(&wb_ctl->done_lock);
while (num_inflight) > 0)
spin_lock(&wb_ctl->done_lock);
list_del(&req->entry);
spin_unlock(&wb_ctl->done_lock);
// num_inflight becomes 0
atomic_dec(num_inflight);
// Leave zram_writeback_slots
// Free wb_ctl
release_wb_ctl(wb_ctl);
// UAF crash!
wake_up(&wb_ctl->done_wait);
This patch fixes this race by using RCU. By protecting wb_ctl with
rcu_read_lock() in zram_writeback_endio and using kfree_rcu() to free it,
we ensure that wb_ctl remains valid during the execution of
zram_writeback_endio.
Link: https://lore.kernel.org/20260512074918.2606208-1-richardycc@google.com
Fixes: f405066a1f0d ("zram: introduce writeback bio batching")
Signed-off-by: Richard Chang <richardycc@google.com>
Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Martin Liu <liumartin@google.com>
Cc: wang wei <a929244872@163.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
recompress_store() parses the type= parameter with three if statements
checking for "idle", "huge", and "huge_idle". An unrecognized value
silently falls through with mode left at 0, causing the recompression pass
to run with no slot filter — processing all slots instead of the
intended subset.
Add a !mode check after the type parsing block to return -EINVAL for
unrecognized values, consistent with the function's other parameter
validation.
Link: https://lore.kernel.org/20260407153027.42425-1-astellman@stellman-greene.com
Signed-off-by: Andrew Stellman <astellman@stellman-greene.com>
Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As reported by Qu Wenruo and Avinesh Kumar, the following
getconf PAGESIZE
65536
blkdiscard -p 4k /dev/zram0
takes literally forever to complete. zram doesn't support partial
discards and just returns immediately w/o doing any discard work in such
cases. The problem is that we forget to endio on our way out, so
blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to
end_bio label, which does bio_endio().
Link: https://lore.kernel.org/20260331074255.777019-1-senozhatsky@chromium.org
Fixes: 0120dd6e4e20 ("zram: make zram_bio_discard more self-contained")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Qu Wenruo <wqu@suse.com>
Closes: https://lore.kernel.org/linux-block/92361cd3-fb8b-482e-bc89-15ff1acb9a59@suse.com
Tested-by: Qu Wenruo <wqu@suse.com>
Reported-by: Avinesh Kumar <avinesh.kumar@suse.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1256530
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
scan_slots_for_writeback() and scan_slots_for_recompress() work in a "best
effort" fashion, if they cannot allocate memory for a new pp-slot
candidate they just return and post-processing selects slots that were
successfully scanned thus far. scan_slots functions never return errors
and their callers never check the return status, so convert them to return
void.
Link: https://lkml.kernel.org/r/20260317032349.753645-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When read_from_bdev_async() fails to chain bio, for instance fails to
allocate request or bio, we need to propagate the error condition so that
upper layer is aware of it. zram already does that by setting
BLK_STS_IOERR ->bi_status, but only for sync reads. Change async read
path to return its error status so that async errors are also handled.
Link: https://lkml.kernel.org/r/20260316015354.114465-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Brian Geffon <bgeffon@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Calling `LZ4_loadDict()` repeatedly in Zram causes significant overhead
due to its internal dictionary pre-processing. This commit introduces a
template stream mechanism to pre-process the dictionary only once when the
dictionary is initially set or modified. It then efficiently copies this
state for subsequent compressions.
Verification Test Items:
Test Platform: android16-6.12
1. Collect Anonymous Page Dataset
1) Apply the following patch:
static bool zram_meta_alloc(struct zram *zram, u64 disksize)
if (!huge_class_size)
- huge_class_size = zs_huge_class_size(zram->mem_pool);
+ huge_class_size = 0;
2）Install multiple apps and monkey testing until SwapFree is close to 0.
3）Execute the following command to export data:
dd if=/dev/block/zram0 of=/data/samples/zram_dump.img bs=4K
2. Train Dictionary
Since LZ4 does not have a dedicated dictionary training tool, the zstd
tool can be used for training[1]. The command is as follows:
zstd --train /data/samples/* --split=4096 --maxdict=64KB -o /vendor/etc/dict_data
3. Test Code
adb shell "dd if=/data/samples/zram_dump.img of=/dev/test_pattern bs=4096 count=131072 conv=fsync"
adb shell "swapoff /dev/block/zram0"
adb shell "echo 1 > /sys/block/zram0/reset"
adb shell "echo lz4 > /sys/block/zram0/comp_algorithm"
adb shell "echo dict=/vendor/etc/dict_data > /sys/block/zram0/algorithm_params"
adb shell "echo 6G > /sys/block/zram0/disksize"
echo "Start Compression"
adb shell "taskset 80 dd if=/dev/test_pattern of=/dev/block/zram0 bs=4096 count=131072 conv=fsync"
echo.
echo "Start Decompression"
adb shell "taskset 80 dd if=/dev/block/zram0 of=/dev/output_result bs=4096 count=131072 conv=fsync"
echo "mm_stat:"
adb shell "cat /sys/block/zram0/mm_stat"
echo.
Note: To ensure stable test results, it is best to lock the CPU frequency
before executing the test.
LZ4 supports dictionaries up to 64KB. Below are the test results for
compression rates at various dictionary sizes:
dict_size base patch
4 KB 156M/s 219M/s
8 KB 136M/s 217M/s
16KB 98M/s 214M/s
32KB 66M/s 225M/s
64KB 38M/s 224M/s
When an LZ4 compression dictionary is enabled, compression speed is
negatively impacted by the dictionary's size; larger dictionaries result
in slower compression. This patch eliminates the influence of dictionary
size on compression speed, ensuring consistent performance regardless of
dictionary scale.
Link: https://lkml.kernel.org/r/698181478c9c4b10aa21b4a847bdc706@honor.com
Link: https://github.com/lz4/lz4?tab=readme-ov-file [1]
Signed-off-by: gao xu <gaoxu2@honor.com>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We have two functions that accept algo= and priority= params -
algorithm_params_store() and recompress_store(). This patch unifies and
hardens handling of those parameters.
There are 4 possible cases:
- only priority= provided [recommended]
We need to verify that provided priority value is
within permitted range for each particular function.
- both algo= and priority= provided
We cannot prioritize one over another. All we should
do is to verify that zram is configured in the way
that user-space expects it to be. Namely that zram
indeed has compressor algo= setup at given priority=.
- only algo= provided [not recommended]
We should lookup priority in compressors list.
- none provided [not recommended]
Just use function's defaults.
Link: https://lkml.kernel.org/r/20260311084312.1766036-7-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Minchan Kim <minchan@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: gao xu <gaoxu2@honor.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Chained recompression has unpredictable behavior and is not useful in
practice.
First, systems usually configure just one alternative recompression
algorithm, which has slower compression/decompression but better
compression ratio. A single alternative algorithm doesn't need chaining.
Second, even with multiple recompression algorithms, chained recompression
is suboptimal. If a lower priority algorithm succeeds, the page is never
attempted with a higher priority algorithm, leading to worse memory
savings. If a lower priority algorithm fails, the page is still attempted
with a higher priority algorithm, wasting resources on the failed lower
priority attempt.
In either case, the system would be better off targeting a specific
priority directly.
Chained recompression also significantly complicates the code. Remove it.
Link: https://lkml.kernel.org/r/20260311084312.1766036-6-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: gao xu <gaoxu2@honor.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It's not entirely correct to use ->num_active_comps for max-prio limit, as
->num_active_comps just tells the number of configured algorithms, not the
max configured priority. For instance, in the following theoretical
example:
[lz4] [nil] [nil] [deflate]
->num_active_comps is 2, while the actual max-prio is 3.
Drop ->num_active_comps and use ZRAM_MAX_COMPS instead.
Link: https://lkml.kernel.org/r/20260311084312.1766036-4-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Minchan Kim <minchan@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: gao xu <gaoxu2@honor.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Do not silently autocorrect bad recompression priority parameter value and
just error out.
Link: https://lkml.kernel.org/r/20260311084312.1766036-3-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Minchan Kim <minchan@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: gao xu <gaoxu2@honor.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "zram: recompression cleanups and tweaks", v2.
This series is a somewhat random mix of fixups, recompression cleanups and
improvements partly based on internal conversations. A few patches in the
series remove unexpected or confusing behaviour, e.g. auto correction of
bad priority= param for recompression, which should have always been just
an error. Then it also removes "chain recompression" which has a tricky,
unexpected and confusing behaviour at times. We also unify and harden the
handling of algo/priority params. There is also an addition of missing
device lock in algorithm_params_store() which previously permitted
modification of algo params while the device is active.
This patch (of 6):
First, algorithm_params_store(), like any sysfs handler, should grab
device lock.
Second, like any write() sysfs handler, it should grab device lock in
exclusive mode.
Third, it should not permit change of algos' parameters after device init,
as this doesn't make sense - we cannot compress with one C/D dict and then
just change C/D dict to a different one, for example.
Another thing to notice is that algorithm_params_store() accesses device's
->comp_algs for algo priority lookup, which should be protected by device
lock in exclusive mode in general.
Link: https://lkml.kernel.org/r/20260311084312.1766036-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20260311084312.1766036-2-senozhatsky@chromium.org
Fixes: 4eac932103a5 ("zram: introduce algorithm_params device attribute")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Cc: gao xu <gaoxu2@honor.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, zram dynamically allocates memory for compressor algorithm
names when they are set by the user. This requires careful memory
management, including explicit `kfree` calls and special handling to avoid
freeing statically defined default compressor names.
This patch refactors the way zram handles compression algorithm names.
Instead of storing dynamically allocated copies, `zram->comp_algs` will
now store pointers directly to the static name strings defined within the
`zcomp_ops` backend structures, thereby removing the need for conditional
`kfree` calls.
Link: https://lkml.kernel.org/r/5bb2e9318d124dbcb2b743dcdce6a950@honor.com
Signed-off-by: gao xu <gaoxu2@honor.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
slot_free() basically completely resets the slots by clearing all of
its flags and attributes. While zram_writeback_complete() restores
some of flags back (those that are necessary for async read
decompression) we still lose a lot of slot's metadata. For example,
slot's ac-time, or ZRAM_INCOMPRESSIBLE.
More importantly, restoring flags/attrs requires extra attention as
some of the flags are directly affecting zram device stats. And the
original code did not pay that attention. Namely ZRAM_HUGE slots
handling in zram_writeback_complete(). The call to slot_free() would
decrement ->huge_pages, however when zram_writeback_complete() restored
the slot's ZRAM_HUGE flag, it would not get reflected in an incremented
->huge_pages. So when the slot would finally get freed, slot_free()
would decrement ->huge_pages again, leading to underflow.
Fix this by open-coding the required memory free and stats updates in
zram_writeback_complete(), rather than calling the destructive
slot_free(). Since we now preserve the ZRAM_HUGE flag on written-back
slots (for the deferred decompression path), we also update slot_free()
to skip decrementing ->huge_pages if ZRAM_WB is set.
Link: https://lkml.kernel.org/r/20260320023143.2372879-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20260319034912.1894770-1-senozhatsky@chromium.org
Fixes: d38fab605c667 ("zram: introduce compressed data writeback")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rename writeback_compressed attr to compressed_writeback to avoid possible
confusion and have more natural naming. writeback_compressed may look
like an alternative version of writeback while in fact
writeback_compressed only sets a writeback property. Make this
distinction more clear with a new compressed_writeback name.
This updates a feature which is new in 7.0-rcX.
Link: https://lkml.kernel.org/r/20260226025429.1042083-1-senozhatsky@chromium.org
Fixes: 4c1d61389e8e ("zram: introduce writeback_compressed device attribute")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Richard Chang <richardycc@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
init_lock has completely outgrown its initial purpose and is no longer
used only to "prevent concurrent execution of device init" as the stale
comment suggests. The scope of this lock is much bigger now.
These days this lock (rw_semaphore) controls how a task owns the
corresponding zram device: either in shared mode or in exclusive mode.
All zram device attribute writes should own the device in exclusive mode,
which synchronizes these tasks and prevents, for example, concurrent
execution of recompression and writeback.
All zram device attribute reads should own the device in shared mode.
Rename the lock to dev_lock to better reflect its current purpose.
Link: https://lkml.kernel.org/r/20260115080807.3957860-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Using class->size to detect spanning objects is not entirely correct,
because some size classes can hold a range of object sizes of up to
class->size bytes in length, due to size-classes merge. Such classes use
padding for cases when actually written objects are smaller than
class->size. zs_obj_read_begin() can incorrectly hit the slow path and
perform memcpy of such objects, basically copying padding bytes. Instead
of class->size zs_obj_read_begin() should use the actual compressed object
length (both zram and zswap know it) so that it can correctly handle
situations when a written object is small enough to fit into the first
physical page.
Link: https://lkml.kernel.org/r/20260107052145.3586917-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev> [zsmalloc & zswap]
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel
message catalog" from 2008 [1] which never made it upstream.
The macro was added to s390 code to allow for an out-of-tree patch which
used this to generate unique message ids. Also this out-of-tree doesn't
exist anymore.
The pattern of how the KMSG_COMPONENT is used was partially also used for
non s390 specific code, for whatever reasons.
Remove the macro in order to get rid of a pointless indirection.
Link: https://lkml.kernel.org/r/20251126143602.2207435-1-hca@linux.ibm.com
Link: https://lwn.net/Articles/292650/ [1]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pp_in_progress makes sure that only one post-processing (writeback or
recomrpession) is active at any given time. Functionality wise it,
basically, shadows zram init_lock, when init_lock is acquired in writer
mode.
Switch recompress_store() and writeback_store() to take zram init_lock in
writer mode, like all store() sysfs handlers should do, so that we can
drop pp_in_progress. Recompression and writeback can be somewhat slow, so
holding init_lock in writer mode can block zram attrs reads, but in
reality the only zram attrs reads that take place are mm_stat reads, and
usually it's the same process that reads mm_stat and does recompression or
writeback.
Link: https://lkml.kernel.org/r/20251216071342.687993-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ac_time is now in seconds, do not use ktime_to_timespec64()
[akpm@linux-foundation.org: remove now-unused local `ts']
[akpm@linux-foundation.org: fix build]
Link: https://lkml.kernel.org/r/20260115033031.3818977-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Chris Mason <clm@meta.com>
Closes: https://lkml.kernel.org/r/20260114124522.1326519-1-clm@meta.com
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A minor fixup of 80-cols breakage in recompress_slot() comment and
zs_malloc() call.
Link: https://lkml.kernel.org/r/ff3254847dbdc6fbd2e3fed53c572a261d60b7b6.1765775954.git.senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Richard Chang <richardycc@google.com>
Cc: Chris Mason <clm@meta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We have a somewhat confusing internal API naming. E.g. the following
code:
zram_slot_lock()
if (zram_allocated())
zram_set_flag()
zram_slot_unlock()
may look like it does something on zram device level, but in fact it tests
and sets slot entry flags, not the device ones.
Rename API to explicitly distinguish functions that operate on the slot
level from functions that operate on the zram device level.
While at it, fixup some coding styles.
[senozhatsky@chromium.org: fix up mark_slot_accessed()]
Link: https://lkml.kernel.org/r/20260115031922.3813659-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/775a0b1a0ace5caf1f05965d8bc637c1192820fa.1765775954.git.senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We can reduce sizeof(zram_table_entry) on 64-bit systems by converting
flags and ac_time to u32. Entry flags fit into u32, and for ac_time u32
gives us over a century of entry lifespan (approx 136 years) which is
plenty (zram uses system boot time (seconds)).
In struct zram_table_entry we use bytes aliasing, because bit-wait API
(for slot lock) requires a whole unsigned long word.
Link: https://lkml.kernel.org/r/d7c0b48450c70eeb5fd8acd6ecd23593f30dbf1f.1765775954.git.senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: David Stevens <stevensd@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Do not spread device attributes declarations across the file, move
io_stat, mm_stat, debug_stat to a common device-attr section.
Link: https://lkml.kernel.org/r/20251201094754.4149975-8-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use init_lock guard() in sysfs store/show handlers, in order to simplify
and, more importantly, to modernize the code.
While at it, fix up more coding styles.
Link: https://lkml.kernel.org/r/20251201094754.4149975-7-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We don't free page in zram_free_page(), not all slots even have any memory
associated with them (e.g. ZRAM_SAME). We free the slot (or reset it),
rename the function accordingly.
Link: https://lkml.kernel.org/r/20251201094754.4149975-6-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move bd_stat function and attribute declaration to
existing CONFIG_WRITEBACK ifdef-sections.
Link: https://lkml.kernel.org/r/20251201094754.4149975-5-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce witeback_compressed device attribute to toggle compressed
writeback (decompression on demand) feature.
[senozhatsky@chromium.org: rewrote original patch, added documentation]
Link: https://lkml.kernel.org/r/20251201094754.4149975-3-senozhatsky@chromium.org
Signed-off-by: Richard Chang <richardycc@google.com>
Co-developed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Minchan Kim <minchan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "zram: introduce compressed data writeback", v2.
As writeback becomes more common there is another shortcoming that needs
to be addressed - compressed data writeback. Currently zram does
uncompressed data writeback which is not optimal due to potential CPU and
battery wastage. This series changes suboptimal uncompressed writeback to
a more optimal compressed data writeback.
This patch (of 7):
zram stores all written back slots raw, which implies that during
writeback zram first has to decompress slots (except for ZRAM_HUGE slots,
which are raw already). The problem with this approach is that not every
written back page gets read back (either via read() or via page-fault),
which means that zram basically wastes CPU cycles and battery
decompressing such slots. This changes with introduction of decompression
on demand, in other words decompression on read()/page-fault.
One caveat of decompression on demand is that async read is completed in
IRQ context, while zram decompression is sleepable. To workaround this,
read-back decompression is offloaded to a preemptible context - system
high-prio work-queue.
At this point compressed writeback is still disabled, a follow up patch
will introduce a new device attribute which will make it possible to
toggle compressed writeback per-device.
[senozhatsky@chromium.org: rewrote original implementation]
Link: https://lkml.kernel.org/r/20251201094754.4149975-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20251201094754.4149975-2-senozhatsky@chromium.org
Signed-off-by: Richard Chang <richardycc@google.com>
Co-developed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Minchan Kim <minchan@google.com>
Suggested-by: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The spelling of the word "relases" is incorrect; it should be "releases".
Link: https://lkml.kernel.org/r/20251125020522.1913-1-chuguangqing@inspur.com
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the page size exceeds 4KB, if bd_wb_limit is set to a value that is
not aligned with the page size, it will cause a numerical wrap-around
issue for bd_wb_limit. For example, when the page size is set to 16KB and
bd_wb_limit is set to 3, after one write-back operation, the value of
bd_wb_limit will become -1. More seriously, since bd_wb_limit is an
unsigned number, its value may become as large as 2^64 - 1.
The core reason for this problem is that the unit of bd_wb_limit is 4KB.
For example, when a write-back occurs on a system with a page size of
16KB, 4 needs to be subtracted from bd_wb_limit. This operation takes
place in the zram_account_writeback_submit function.
This patch fixes the issue by limiting bd_wb_limit to be an integer
multiple of PAGE_SIZE / 4096.
Link: https://lkml.kernel.org/r/tencent_5936CFE72BAB2BA76887BB69DCC1B5E67C05@qq.com
Fixes: 1d69a3f8ae77 ("zram: idle writeback fixes and cleanup")
Signed-off-by: Yuwen Chen <ywen.chen@foxmail.com>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
