| Age | Commit message (Collapse) | Author |
|---|
|
epoll_wait() is a valid sleeping reason for real-time tasks because it
uses PI-aware locking, but the rtapp sleep monitor documentation only
discusses clock_nanosleep() and futexes. Document it.
ABORT_SLEEP represents a task restoring TASK_RUNNING before entering
the scheduler. Since the task does not actually block, it becomes
runnable again without a wakeup sequence unsafe for real-time. Document
this behavior.
Signed-off-by: Chao Liu <chao.liu@processmission.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260729081102.73138-1-chao.liu@processmission.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Add a wakeup monitor to detect a lower-priority task waking up a
higher-priority task.
The rtapp/sleep monitor already detects this. However, that monitor
triggers an error in the context of the wakee task and user only gets
the stacktrace of that task. It is also extremely useful to get the
stacktrace of the waker task, which this monitor offers. In other
words, this monitor complements the rtapp/sleep monitor.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/ba5658fa13e49ada466b84a2c211f233037180b5.1781852967.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The rtapp/sleep monitor's primary purpose is detecting common mistakes
with user-space real-time design. Monitoring real-time issues with
kernel threads is a bonus.
However, accomodating kernel threads complicates the monitor due to
the edge cases which is seen by the monitor as lower-priority task
waking higher-priority task:
- kthread_stop() wakes up the task in order to stop it.
- The rcu thread and migration thread can be woken by any task.
- The ktimerd thread is woken near the end of irq_exit_rcu(), where
the preempt counter is "broken" and falsely says this is task
context. This requires the monitor to use the hardirq_context flag
instead of the preempt counter.
Beside complicating the monitor, the final case also requires enabling
CONFIG_TRACE_IRQFLAGS (so that "hardirq_context" can be used). This
adds overhead to the kernel even when the monitor is not active. This
may be an obstacle to enabling this monitor in distros' kernels.
Furthermore, kernel threads usually are started before the monitor is
enabled. Consequently, the threads' states (i.o.w. the monitor's
atomic propositions for the threads) are not fully known to the
monitor. As a result, the kernel threads mostly cannot be monitored.
Overall, the downsides of accomodating kernel threads outweights the
benefits. Thus, exclude kernel threads to simplify the monitor.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/eec2ca5224bcdacc45b8e1eb2f0e68109e1cae7a.1781852967.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
CLOCK_REALTIME is the only clock that often is misused in real-time
applications. The other clocks either are safe for real-time uses
(CLOCK_TAI, CLOCK_MONOTONIC, CLOCK_BOOTTIME) or are unlikely to be misused
(CLOCK_AUX, CLOCK_PROCESS_CPUTIME_ID).
Update the monitor to only warn about CLOCK_REALTIME.
While at it, update the out-of-sync documentation.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/c7ceb5c6263ee8f43a2676acae669cf486b0d903.1781852967.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The rtapp/sleep monitor detects real-time tasks which go to sleep in an
real-time-unsafe manner. If this happen, the monitor triggers a trace event
in the sched_wakeup tracepoint's handler.
However, the invoking context of that trace event is not the most
informative, because of the stack trace of that event is the wakeup's code
path which is not very helpful:
74.669317: rv:error_sleep: condvar[254]: violation detected
ltl_validate+0x345 ([kernel.kallsyms])
handle_sched_wakeup+0x34 ([kernel.kallsyms])
ttwu_do_activate+0xff ([kernel.kallsyms])
sched_ttwu_pending+0x104 ([kernel.kallsyms])
__flush_smp_call_function_queue+0x15b ([kernel.kallsyms])
__sysvec_call_function_single+0x18 ([kernel.kallsyms])
sysvec_call_function_single+0x66 ([kernel.kallsyms])
asm_sysvec_call_function_single+0x1a ([kernel.kallsyms])
pv_native_safe_halt+0xf ([kernel.kallsyms])
default_idle+0x9 ([kernel.kallsyms])
default_idle_call+0x33 ([kernel.kallsyms])
do_idle+0x234 ([kernel.kallsyms])
cpu_startup_entry+0x24 ([kernel.kallsyms])
start_secondary+0xf8 ([kernel.kallsyms])
common_startup_64+0x13e ([kernel.kallsyms])
What would be much more valuable is the stack trace of the task itself.
Instead of using the sched_wakeup tracepoint, use the sched_exit
tracepoint. This makes the event happen in the task's context, making
the stack trace far more informative for user:
rv:error_sleep: condvar[254]: violation detected
ltl_validate+0x345 ([kernel.kallsyms])
handle_sched_exit+0x39 ([kernel.kallsyms])
__schedule+0x80f ([kernel.kallsyms])
schedule+0x22 ([kernel.kallsyms])
futex_do_wait+0x33 ([kernel.kallsyms])
__futex_wait+0x8c ([kernel.kallsyms])
futex_wait+0x73 ([kernel.kallsyms])
do_futex+0xc6 ([kernel.kallsyms])
__x64_sys_futex+0x121 ([kernel.kallsyms])
do_syscall_64+0xf3 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe+0x77 ([kernel.kallsyms])
__futex_abstimed_wait_common64+0xc6 (inlined)
__futex_abstimed_wait_common+0xc6 (/usr/lib/x86_64-linux-gnu/libc.so.6)
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/d97b4b5c476e5792b6875ec9bbf8dc214f999516.1781852967.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The sched monitor page was linking to Daniel's website which is now
down. The main purpose of the link was to point to a source for the
models from the original author and that can be found also in his
published paper.
Replace the link with a reference to Daniel's "A thread synchronization
model for the PREEMPT_RT Linux kernel" which can be found online and
includes the models definitions as well as the work behind them (not the
original patches but since they're based on a 5.0 kernel and are mostly
included upstream, there's little value in keeping them in the docs).
Fixes: 03abeaa63c08 ("Documentation/rv: Add docs for the sched monitors")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260427131709.170505-2-gmonaco@redhat.com>
|
|
Add the deadline monitors collection to validate the deadline scheduler,
both for deadline tasks and servers.
The currently implemented monitors are:
* nomiss:
validate dl entities run to completion before their deadiline
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20260330111010.153663-13-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The opid monitor validates that wakeup and need_resched events only
occur with interrupts and preemption disabled by following the
preemptirq tracepoints.
As reported in [1], those tracepoints might be inaccurate in some
situations (e.g. NMIs).
Since the monitor doesn't validate other ordering properties, remove the
dependency on preemptirq tracepoints and convert the monitor to a hybrid
automaton to validate the constraint during event handling.
This makes the monitor more robust by also removing the workaround for
interrupts missing the preemption tracepoints, which was working on
PREEMPT_RT only and allows the monitor to be built on kernels without
the preemptirqs tracepoints.
[1] - https://lore.kernel.org/lkml/20250625120823.60600-1-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Add a sample monitor to showcase hybrid/timed automata.
The stall monitor identifies tasks stalled for longer than a threshold
and reacts when that happens.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Describe theory and implementation of hybrid automata in the dedicated
page hybrid_automata.rst
Include a section on how to integrate a hybrid automaton in
monitor_synthesis.rst
Also remove a hanging $ in deterministic_automata.rst
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20260330111010.153663-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier updates from Steven Rostedt:
- Refactor da_monitor to minimize macros
Complete refactor of da_monitor.h to reduce reliance on macros
generating functions. Use generic static functions and uses the
preprocessor only when strictly necessary (e.g. for tracepoint
handlers).
The change essentially relies on functions with generic names (e.g.
da_handle) instead of monitor-specific as well adding the need to
define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including
the header rather than calling macros that would define functions.
Also adapt monitors and documentation accordingly.
- Cleanup DA code generation scripts
Clean up functions in dot2c removing reimplementations of trivial
library functions (__buff_to_string) and removing some other unused
intermediate steps.
- Annotate functions with types in the rvgen python scripts
- Remove superfluous assignments and cleanup generated code
The rvgen scripts generate a superfluous assignment to 0 for enum
variables and don't add commas to the last elements, which is against
the kernel coding standards. Change the generation process for a
better compliance and slightly simpler logic.
- Remove superfluous declarations from generated code
The monitor container source files contained a declaration and a
definition for the rv_monitor variable. The former is superfluous and
was removed.
- Fix reference to outdated documentation
s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in
da_monitor.h
* tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix documentation reference in da_monitor.h
verification/rvgen: Remove unused variable declaration from containers
verification/dot2c: Remove superfluous enum assignment and add last comma
verification/dot2c: Remove __buff_to_string() and cleanup
verification/rvgen: Annotate DA functions with types
verification/rvgen: Adapt dot2k and templates after refactoring da_monitor.h
Documentation/rv: Adapt documentation after da_monitor refactoring
rv: Cleanup da_monitor after refactor
rv: Refactor da_monitor to minimise macros
|
|
Previous changes refactored the da_monitor header file to avoid using
macros. This implies a few changes in how to import and use da_monitor
helpers:
DECLARE_DA_MON_<TYPE>(name, type) is substituted by
#define RV_MON_TYPE RV_MON_<TYPE>
da_handle_event_<name>() is substituted by
da_handle_event()
Update the documentation to reflect the changes.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20251126104241.291258-4-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The file 'da_monitor_synthesis.rst' was renamed to 'monitor_synthesis.rst' in
commit f40a7c06020709
("Documentation/rv: Prepare monitor synthesis document for LTL inclusion").
Signed-off-by: Soham Metha <sohammetha01@gmail.com>
Fixes: f40a7c06020709 ("Documentation/rv: Prepare monitor synthesis document for LTL inclusion")
Acked-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251204032452.9523-1-sohammetha01@gmail.com>
|
|
Specifically, fix spelling of "practice"
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250810111249.93181-1-krishnagopi487@gmail.com
|
|
Add a per-cpu monitor as part of the sched model:
* opid: operations with preemption and irq disabled
Monitor to ensure wakeup and need_resched occur with irq and
preemption disabled or in irq handlers.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-10-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Nam Cao <namcao@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add 2 per-task monitors as part of the sched model:
* nrp: need-resched preempts
Monitor to ensure preemption requires need resched.
* sssw: set state sleep and wakeup
Monitor to ensure sched_set_state to sleepable leads to sleeping and
sleeping tasks require wakeup.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250728135022.255578-9-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Nam Cao <namcao@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The tss monitor currently guarantees task switches can happen only while
scheduling, whereas the sncid monitor enforces scheduling occurs with
interrupt disabled.
Replace the monitors with a more comprehensive specification which
implies both but also ensures that:
* each scheduler call disable interrupts to switch
* each task switch happens with interrupts disabled
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250728135022.255578-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The 'next' operator is a unary operator. It is defined as: "next time, the
operand must be true".
Support this operator. For RV monitors, "next time" means the next
invocation of ltl_validate().
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/9c32cec04dd18d2e956fddd84b0e0a2503daa75a.1752239482.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add documents describing linear temporal logic runtime verification
monitors and how to generate them using rvgen.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/be13719e66fd8da147d7c69d5365aa23c52b743f.1751634289.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Monitor synthesis from deterministic automaton and linear temporal logic
have a lot in common. Therefore a single document should describe both.
Change da_monitor_synthesis.rst to monitor_synthesis.rst. LTL monitor
synthesis will be added to this file by a follow-up commit.
This makes the diff far easier to read. If renaming and adding LTL info is
done in a single commit, git wouldn't recognize it as a rename, but a file
removal and a file addition.
While at it, correct the old dot2k commands to the new rvgen commands.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/d91c6e4600287f4732d68a014219e576a75ce6dc.1751634289.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add documentation describing the rtapp monitor.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/df0242d74c12511e82cc9d73c082def91a160c74.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The pages Documentation/tools/rv/rv-mon-sched.rst and
Documentation/trace/rv/monitor_sched.rst were introduced but not
included in any index.
Add them to the respective indices.
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/20250327081240.46422-1-gmonaco@redhat.com
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 03abeaa63c08 ("Documentation/rv: Add docs for the sched monitors")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add man page and kernel documentation for the sched monitors, as sched
is a container of other monitors, document all in the same page.
sched is the first nested monitor, also explain what is a nested monitor
and how enabling containers or children monitors work.
To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-9-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There are some typos in the documentation: 'a' -> 'at', missing 'to'.
Fix them.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241209130640.10954-1-algonell@gmail.com
|
|
Fix typos in Documentation.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-4-helgaas@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Per task wakeup while not running (wwnr) monitor.
This model is broken, the reason is that a task can be running in the
processor without being set as RUNNABLE. Think about a task about to
sleep:
1: set_current_state(TASK_UNINTERRUPTIBLE);
2: schedule();
And then imagine an IRQ happening in between the lines one and two,
waking the task up. BOOM, the wakeup will happen while the task is
running.
Q: Why do we need this model, so?
A: To test the reactors.
Link: https://lkml.kernel.org/r/473c0fc39967250fdebcff8b620311c11dccad30.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The wakeup in preemptive (wip) monitor verifies if the
wakeup events always take place with preemption disabled:
|
|
v
#==================#
H preemptive H <+
#==================# |
| |
| preempt_disable | preempt_enable
v |
sched_waking +------------------+ |
+--------------- | | |
| | non_preemptive | |
+--------------> | | -+
+------------------+
The wakeup event always takes place with preemption disabled because
of the scheduler synchronization. However, because the preempt_count
and its trace event are not atomic with regard to interrupts, some
inconsistencies might happen.
The documentation illustrates one of these cases.
Link: https://lkml.kernel.org/r/c98ca678df81115fddc04921b3c79720c836b18f.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add the da_monitor_instrumentation.rst. It describes the basics
of RV monitor instrumentation.
Link: https://lkml.kernel.org/r/0557d5c68e2fc252f2643c2cc5295a67e2b73277.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add the da_monitor_synthesis.rst introduces some concepts behind the
Deterministic Automata (DA) monitor synthesis and interface.
Link: https://lkml.kernel.org/r/7873bdb7b2e5d2bc0b2eb6ca0b324af9a0ba27a0.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add documentation about deterministic automaton and its possible
representations (formal, graphic, .dot and C).
Link: https://lkml.kernel.org/r/387edaed87630bd5eb37c4275045dfd229700aa6.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add the runtime-verification.rst document, explaining the basics of RV
and how to use the interface.
Link: https://lkml.kernel.org/r/4be7d1a88ab1e2eb0767521e1ab52a149a154bc4.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
