summaryrefslogtreecommitdiff
path: root/Documentation/hwmon
AgeCommit message (Collapse)Author
7 daysMerge tag 'char-misc-7.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc/IIO/etc driver updates from Greg KH: "Here is the big set of char, misc, iio, counter, fpga, and other small driver subsystems for 7.3-rc1. Overall, due to some driver removals we only added a bit more code than removed, which was a nice change. Highlights in this merge request are: - Loads of IIO driver updates and additions - binder driver updates (more on that below...) - Removal of the SGI XP and GRU drivers as they are not used anymore and turn out to be pretty insecure overall - Removal of the obsolete ibmasm driver as it's not being used anymore - Coresight driver updates and additions - Mei driver udpates - Counter driver updates - FPGA driver updates - ICC driver updates - lots and lots of other tiny driver updates to resolve reported issues All of these have been in linux-next for a while" * tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits) iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF iio: adc: pac1921: fix wrong channel used in trigger handler read iio: light: gp2ap002: re-enable irq if runtime suspend fails iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes iio: light: apds9306: fix PM reference leak in apds9306_read_data() iio: gyro: mpu3050: fix sign of raw angular velocity readings iio: srf04: fix pm_runtime handling on probe error path iio: adc: ad4080: configure backend data size iio: adc: adi-axi-adc: add data size support for AD408X backend iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable iio: dac: ad5446: fix OF module device table iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask iio: light: opt4001: Reject integration times with a non-zero seconds part iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem() iio: light: opt4001: Fix power down clearing bits of the wrong register iio: light: opt4060: Fix incorrect register name in threshold read error message iio: light: opt4060: Fix pointer type passed to div_u64_rem() iio: light: opt4060: Reject integration times with a non-zero seconds part iio: light: ltrf216a: fix runtime PM reference leak in error path iio: pressure: dps310: fix NULL pointer dereference on ACPI probe ...
2026-08-16hwmon: (emc1403) Drop hysteresis for low limit temperatureMarius Cristea
Remove the hysteresis for low temperature limit, in hardware the hysteresis is applied only to the maxim limit and the critical limit temperature. Fixes: 54392ce4446e3 ("hwmon: (emc1403) Add support for min_hyst attributes") Signed-off-by: Marius Cristea <marius.cristea@microchip.com> Link: https://lore.kernel.org/r/20260813-emc1403_remove_min_hyst-v1-1-43a0d05d9f49@microchip.com [groeck: Updated subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-14hwmon: (asus_rog_ryujin) Add ROG Ryujin III White EditionWill Smith
The ROG Ryujin III White Edition uses the same report layout as the other supported Ryujin III variants. Add its USB device ID and list it in the driver documentation. The device was tested with the driver on the author's hardware. Link: https://github.com/aleksamagicka/asus_rog_ryujin-hwmon/pull/10 Signed-off-by: Will Smith <github@notthatwillsmith.com> Assisted-by: Codex:gpt-5.6-sol sparse Signed-off-by: Arie Miller <renari@arimil.com> Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20260812103532.395049-4-renari@arimil.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-14hwmon: (asus_rog_ryujin) Add ROG Ryujin III supportArie Miller
The ROG Ryujin III uses different report offsets and a different cooler-duty channel from the Ryujin II. It also lacks the separate external fan controller supplied with the older model. Add model data and USB IDs for the Extreme and EVA Edition variants. Skip controller commands and hide the unavailable controller hwmon channels for these devices. Update the driver documentation, Kconfig text, and module description accordingly. Link: https://github.com/aleksamagicka/asus_rog_ryujin-hwmon/pull/9 Assisted-by: Codex:gpt-5.6-sol sparse Signed-off-by: Arie Miller <renari@arimil.com> Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20260812103532.395049-3-renari@arimil.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-11hwmon: (nct6775) Add NCT5585D to list of supported chipsJiazhi Huang
NCT5585D uses the same chip ID (0xd428) as NCT6798D and is fully compatible with it. Tested on an ASUS PRIME H610M-D motherboard. Signed-off-by: Jiazhi Huang <huangjia2hi@163.com> Link: https://lore.kernel.org/r/20260811093744.12199-3-huangjia2hi@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-11Documentation: hwmon: (nct6775) Add missing NCT6797D and NCT6798DJiazhi Huang
The NCT6797D and NCT6798D chips are already supported by the driver but were missing from the documentation. Signed-off-by: Jiazhi Huang <huangjia2hi@163.com> Link: https://lore.kernel.org/r/20260811093744.12199-2-huangjia2hi@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (asus-ec-sensors) add ROG STRIX Z390-E GAMINGRodrigo Araujo
The ROG STRIX Z390-E GAMING and Z390-F GAMING are essentially the same board apart from the E's onboard WiFi, so they share the same EC sensor layout. Signed-off-by: Rodrigo Araujo <araujo.rm@gmail.com> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20260809212705.1501382-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (corsair-psu) Update documentationWilken Gottwalt
Add information about the HX1500i 2025 series and fix the missing HX1500i in Kbuild. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/anVuBd8Bb7T66OUO@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (yogafan) Add support for new Lenovo modelsSergio Melas
Add DMI quirk entries and map correct ACPI paths and configurations for additional Lenovo laptop models including the LOQ 15IAX9, XiaoXin Pro 13ARE 2020, IdeaPad 3 15ALC6, Legion Pro 7 16AFR10H, Yoga Pro 7 14IAH10, and Yoga 7 16ARP8. Reorder the DMI quirk table to evaluate specific model matches before generic family fallbacks, preventing DMI shadowing. Signed-off-by: Sergio Melas <sergiomelas@gmail.com> Link: https://lore.kernel.org/r/20260806131103.19104-1-sergiomelas@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (pmbus/mpq8646) Gate the writesVincent Jardin
The write cases of debugfs entries are provisioning and bench helpers. By designs the MPQ8646 powers the CPU core rail, so a wrong write can brown out the board or persist a bad setpoint into finite-cycle NVM. Said differently: some wrong register writes can and likely will physically damage or destroy the chip and/or the board. To be safe, it is disabled by default behind a CONFIG_SENSORS_MPQ8646_DEBUG_UNSAFE and we print an explicit warning banner at probe time when they are built in. Signed-off-by: Vincent Jardin <vjardin@free.fr> Link: https://lore.kernel.org/r/20260730-mpq8646_v0-v7-4-e7c7ad768d5d@free.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (pmbus) Add MPQ8646 driverVincent Jardin
Add a new driver for the MPS MPQ8646 that is a PMBus device. Beyond basic PMBus telemetry, the driver adds: - alarm acknowledge via inX_reset_history. - STATUS_WORD MPS-extended bit decode and the NVM-backed PROTECTION_LAST post-mortem, exposed as a read-only debugfs decoder. - In-driver alarm-poll fallback work item (thanks lm90) for boards without SMBALERT Signed-off-by: Vincent Jardin <vjardin@free.fr> Link: https://lore.kernel.org/r/20260730-mpq8646_v0-v7-3-e7c7ad768d5d@free.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (pmbus/max20830): add support for max20830c and max20840cAlexis Czezar Torreno
Add support for MAX20830C and MAX20840 step-down DC-DC switching regulator with PMBus interface. MAX20830C is a different packaging for MAX20830, and MAX20840C supports 40A regulation compared to MAX20830 that is only 30A. Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com> Link: https://lore.kernel.org/r/20260730-dev-max20830c-v5-4-a7553f84ee74@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2024 EliteSean Lyon
The Kraken 2024 Elite (USB ID 1e71:3012) is protocol-compatible with the existing Kraken 2023 devices and works with the current Z53 code paths. Add its USB product ID and map it to the KRAKEN2023 kind. Tested on hardware: liquid temperature and pump/fan speeds read correctly (cross-checked against liquidctl), and PWM control of both the pump and fan channels works as expected. Signed-off-by: Sean Lyon <sean@seanlyon.dev> Link: https://lore.kernel.org/r/20260728031127.26553-1-sean@seanlyon.dev Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (pmbus/vt7505) Add driver for Analog Devices MAX16545/MAX16550 and ↵Georgi Vlaev
Volterra VT7505 Add a PMBus driver for the Analog Devices MAX16545 and MAX16550, and the Volterra VT7505 controllers. The driver reports input/output voltage, input/output current, input power and temperature over PMBus. All values use the direct data format. Peak input voltage, output voltage, output current, input power and temperature readings are exposed and can be reset. The reported current and power depend on the external current-report resistor connected to the ILOAD pin, which can be provided through the "adi,rload-ohms" device tree property. On the MAX16550 and VT7505, the severe-OCP deglitch time can optionally be configured with the "adi,ocp-severe-filter-us" device tree property. When omitted, the existing hardware setting is left unchanged. Co-developed-by: Dhruva Devineni <ddevineni@juniper.net> Co-developed-by: Debjit Ghosh <dghosh@juniper.net> Co-developed-by: JawaharBalaji Thirumalaisamy <jawaharb@juniper.net> Co-developed-by: Avadhut Naik <avadhutn@juniper.net> Co-developed-by: Santhanakrishnan Balraj <sbalraj@juniper.net> Co-developed-by: Brian Mak <makb@juniper.net> Signed-off-by: Georgi Vlaev <gvlaev@juniper.net> Signed-off-by: Sanman Pradhan <psanman@juniper.net> Link: https://lore.kernel.org/r/20260725211945.288415-3-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (kb9002) Add documentationAndy Chung
Document the sysfs and debugfs interfaces of the Kandou KB9002 hwmon driver. Signed-off-by: Andy Chung <Andy.Chung@amd.com> Link: https://lore.kernel.org/r/20260724-kb9002-upstream-v5-4-9523c3ffe83a@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10docs: hwmon: sg2042-mcu: fix spelling errorshaikh.kamal
Fix spelling error reported by codespell: supprts -> supports No functional change. Signed-off-by: shaikh.kamal <shaikhkamal2012@gmail.com> Link: https://lore.kernel.org/r/20260726065835.21012-1-shaikhkamal2012@gmail.com [groeck: Move driver name to subject line] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (pmbus/max34440): Add support for MAX34452Carlos Jones Jr
Add support for Maxim MAX34452 PMBus 16-Channel V/I Monitor and 12-Channel Sequencer/Marginer. The device is similar to MAX34451 and shares the same configuration function. The MAX34452 supports: - 16 configurable voltage/current monitoring channels - 5 temperature sensors (pages 16-20) - Dynamic channel configuration via MFR_CHANNEL_CONFIG - IOUT average monitoring Signed-off-by: Carlos Jones Jr <carlosjr.jones@analog.com> Co-Developed by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com> Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com> Link: https://lore.kernel.org/r/20260722-max34451_fixes-v2-3-bbddb18ec1d6@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (pmbus) Add MPQ82D00 driverWensheng Wang
Add support for MPS mpq82d00 controller. This driver exposes telemetry and limit value readings and writtings. Signed-off-by: Wensheng Wang <wenswang@yeah.net> Link: https://lore.kernel.org/r/20260704081952.1701914-2-wenswang@yeah.net [groeck: Fixed "WARNING: Title underline too short"] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (sht3x) Document support for GXCAS GXHT30Zaixiang Xu
The GXCAS GXHT30 is a humidity and temperature sensor that is a drop-in replacement for and fully software compatible with the Sensirion SHT30. It is handled by the "sensirion,sht30" fallback compatible without any driver changes; manual instantiation works with the existing sht3x device name. Document the chip as supported. Signed-off-by: Zaixiang Xu <zaixiang.xu.dev@gmail.com> Link: https://lore.kernel.org/r/20260713074559.12196-5-zaixiang.xu.dev@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (asus_ec_sensors) add ProArt Z690-CREATOR WIFIMaurice Mehlhaff
Add support for the ProArt Z690-CREATOR WIFI board Signed-off-by: Maurice Mehlhaff <maurice.mehlhaff@gmx.de> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20260708195638.1324168-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (asus-ec-sensors) add ROG STRIX X870E-E GAMING WIFI7 R2Vishaal Saraiya
The board sensors is a copy of ROG STRIX X870E-E GAMING WIFI7, thus we simply reuse its board_info struct. Signed-off-by: Vishaal Saraiya <vishaal.saraiya@gmail.com> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20260709204037.1998433-3-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (asus-ec-sensors) add ROG CROSSHAIR X870E HEROMiska Hämäläinen
Add support for ROG CROSSHAIR X870E HERO Signed-off-by: Miska Hämäläinen <miska.hamalainen@hotmail.com> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20260705113246.812500-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (asus-ec-sensors) add ROG Maximus Z790 HeroFlorian Schut
Add support for ROG Maximus Z790 Hero. Signed-off-by: Florian Schut <mail@florianschut.nl> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20260705113125.812045-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: Driver for the temp/voltage sensor on PolarFire SoCLars Randers
Add a driver for the temperature and voltage sensors on PolarFire SoC. The temperature reports how hot the die is, and the voltages are the SoC's 1.05, 1.8 and 2.5 volt rails respectively. The hardware supports alarms in theory, but there is an erratum that prevents clearing them once triggered, so no support is added for them. The hardware measures voltage with 16 bits, of which 1 is a sign bit and the remainder holds the voltage as a fixed point integer value. It's improbable that the hardware will work if the voltages are negative, so the driver ignores the sign bits. There's no dt support etc here because this is the child of a simple-mfd syscon. Signed-off-by: Lars Randers <lranders@mail.dk> Co-developed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20260629-wriggle-headscarf-c85a4070dddb@spud Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10doc: adm1275: Add ROHM BD12790Matti Vaittinen
Add the ROHM BD12790 to the list of the ICs supported by the adm1275 driver. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/9bafcfe37190b5a3925e8dcfa3b59f8d240234ba.1782458224.git.mazziesaccount@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10doc: hwmon: Add ROHM BD12780 and BD12780AMatti Vaittinen
Add the ROHM BD12780 and the BD12780A to the list of the ICs supported by the adm1275 driver. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/5ff4a4a7a939cd642522fde407b5c9fa123a7089.1782458224.git.mazziesaccount@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: (chipcap2) Add support for labelFlaviu Nistor
Add support for label sysfs attribute similar to other hwmon devices. This is particularly useful for systems with multiple sensors on the same board, where identifying individual sensors is much easier since labels can be defined via device tree. Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com> Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20260625160423.17882-2-flaviu.nistor@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: coretemp: Fix documentation wordingXiming Zhang
Fix two minor wording issues in the coretemp documentation. Signed-off-by: Ximing Zhang <xzhangjr@gmail.com> Link: https://lore.kernel.org/r/20260616121549.29484-1-xzhangjr@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-08-10hwmon: Add documentation for SQ24860Ziming Zhu
Document the supported sysfs attributes for the Silergy SQ24860 PMBus hwmon driver. Signed-off-by: Ziming Zhu <ziming.zhu@silergycorp.com> Link: https://lore.kernel.org/r/20260612030304.5165-4-zmzhu0630@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-07-31Merge tag 'svc_updates_for_v7.3' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into char-misc-next SoCFPGA firmware updates for v7.3 - Document stratix10-rsu for QSPI size and erase size - Add method to retrieve device info table using RSU - Add support for hardware monitoring using service driver Resolves merge conflicts in: drivers/firmware/stratix10-svc.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'svc_updates_for_v7.3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: hwmon: add Altera SoC FPGA hardware monitoring driver firmware: stratix10-svc: add async HWMON read commands and register socfpga-hwmon device firmware: stratix10-rsu: Add synchronous fallback for async SVC operations firmware: stratix10-rsu: Add flash device info retrieval via SMC Documentation: ABI: add stratix10-rsu QSPI size and erase_size sysfs
2026-07-28hwmon: add Altera SoC FPGA hardware monitoring driverTze Yee Ng
Add a hardware monitor driver for Altera SoC FPGA devices using the Stratix 10 service layer. Sensor channels are selected based on the service layer compatible string. Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com> Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/all/a79aee37be7067691fd02a3a9cfd134c995e5a95.1784785709.git.tze.yee.ng@altera.com/#r Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2026-06-29docs: hwmon: ltc4283: fix malformed table docs build errorRandy Dunlap
Expand the table borders (upper & lower) to prevent a documentation build error: Documentation/hwmon/ltc4283.rst:261: ERROR: Malformed table. Text in column margin in table line 3. ======================= ========================================== power1_failed_fault_log Set to 1 by a power1 fault occurring. power1_good_input_fault_log Set to 1 by a power1 good input fault occurring at PGIO3. Fixes: dd63353a0b5e ("hwmon: ltc4283: Add support for the LTC4283 Swap Controller") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20260620011833.3568693-1-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-22Merge tag 'usb-7.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt driver updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1. Lots of little stuff in here, major highlights include: - USB4STREAM support for Thunderbolt devices. A new way to send "raw" data very quickly over a USB4 connection to another system directly - Other thunderbolt updates and changes to make the stream code work - xhci driver updates and additions - typec driver updates and additions - usb gadget driver updates and fixes for reported issues - zh_CN documentation translation of the USB documentation - usb-serial driver updates - dts cleanups for some USB platforms - other minor USB driver updates and tweaks All of these have been in linux-next for over a week with no reported issues, most of them for many many weeks" * tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits) usb: ucsi: huawei_gaokun: support mode switching thunderbolt: debugfs: Fix sideband write size check thunderbolt: debugfs: Fix margining error counter buffer leak usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro usb: xhci: allocate internal DCBAA mirror dynamically usb: xhci: allocate DCBAA based on host controller max slots usb: xhci: refactor DCBAA struct xhci: Prevent queuing new commands if xhci is inaccessible xhci: dbc: detect and recover hung DbC during enumeraton xhci: dbc: add timestamps to DbC state changes in a new helper. xhci: dbc: add helper to set and clear DbC DCE enable bit xhci: dbc: serialize enabling and disabling dbc xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states usb: xhci: Improve Soft Retries after short transfers usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling usb: xhci: Remove skip_isoc_td() usb: xhci: Simplify xhci_quiesce() usb: xhci: remove legacy 'num_trbs_free' tracking usb: xhci: fix typo in xhci_set_port_power() comment ...
2026-06-10hwmon: temperature: add support for EMC1812Marius Cristea
This is the hwmon driver for Microchip EMC1812/13/14/15/33 Multichannel Low-Voltage Remote Diode Sensor Family. EMC1812 has one external remote temperature monitoring channel. EMC1813 has two external remote temperature monitoring channels. EMC1814 has three external remote temperature monitoring channels, channels 2 and 3 support anti parallel diode. EMC1815 has four external remote temperature monitoring channels and channels 1/2 and 3/4 support anti parallel diode. EMC1833 has two external remote temperature monitoring channels and channels 1 and 2 support anti parallel diode. Resistance Error Correction is supported on channels 1/2 and 3/4. Signed-off-by: Marius Cristea <marius.cristea@microchip.com> Link: https://lore.kernel.org/r/20260610-hw_mon-emc1812-v11-2-cef809af5c19@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-10hwmon: (pmbus/max34440): add support adpm12250Alexis Czezar Torreno
ADPM12250 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering regulated 12V with continuous power level of 2500W. Uses PMBus. Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20260610-dev-adpm12250-v1-1-422760bb80da@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: (ina238) Add update_interval_us attributeFerdinand Schwenk
The INA238 family supports eight conversion time steps from 50 us to 4120 us (SQ52206: 66 us to 8230 us). At the millisecond granularity of update_interval, the four shortest steps (50, 84, 150, 280 us) all round to the same value and cannot be individually selected. Add support for the generic update_interval_us attribute, which reports and programs the same ADC cycle time as update_interval but in microseconds, giving userspace full access to all conversion time steps. Both attributes reflect the total cycle time including the active averaging count: the reported value is the raw conversion time multiplied by the number of averaged samples, and writes apply the inverse mapping. Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com> Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-3-016b55567950@advastore.com [groeck: Fixed some multi-line alignment issues] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: Add update_interval_us chip attributeFerdinand Schwenk
Some hardware monitoring chips support update intervals below one millisecond. The existing update_interval attribute uses millisecond granularity, which causes sub-millisecond steps to round to the same value and become inaccessible from userspace. Introduce update_interval_us, a companion chip-level attribute that expresses the same update interval in microseconds. Drivers implementing this attribute should also implement update_interval for compatibility with millisecond-based userspace interfaces. Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com> Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-2-016b55567950@advastore.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: ltc4283: Add support for the LTC4283 Swap ControllerNuno Sá
Support the LTC4283 Hot Swap Controller. The device features programmable current limit with foldback and independently adjustable inrush current to optimize the MOSFET safe operating area (SOA). The SOA timer limits MOSFET temperature rise for reliable protection against overstresses. An I2C interface and onboard ADC allow monitoring of board current, voltage, power, energy, and fault status. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20260502-ltc4283-support-v13-2-1c206542e652@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: (asus-ec-sensors) add ROG MAXIMUS Z790 EXTREMEBrian Downey
Add support for ROG MAXIMUS Z790 EXTREME Signed-off-by: Brian Downey <bdowne01@gmail.com> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20260608060855.40469-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: (pmbus/max20860a) Add driver for Analog Devices MAX20860ASyed Arif
Add a PMBus driver for the Analog Devices MAX20860A step-down DC-DC switching regulator. The MAX20860A provides monitoring of input/output voltage, output current, and temperature via the PMBus interface using linear data format. Optional regulator support is available via CONFIG_SENSORS_MAX20860A_REGULATOR. Signed-off-by: Syed Arif <arif.syed@hpe.com> Signed-off-by: Sanman Pradhan <psanman@juniper.net> Link: https://lore.kernel.org/r/20260601184516.919488-3-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: (pmbus) Add support for Flex BMR316, BMR321, BMR350 and BMR351Daniel Nilsson
Add support for BMR316, BMR321, BMR350 and BMR351 DC/DC converter modules from Flex to the pmbus driver. Signed-off-by: Daniel Nilsson <linux@erq.se> Link: https://lore.kernel.org/r/20260603085712.659432-2-linux@erq.se [groeck: Resolved conflicts (explicit struct members in pmbus_id)] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: (asus-ec-sensors) add ROG STRIX B850-E GAMING WIFIEugene Shalygin
The board has a similar sensor configuration to the ROG STRIX B850-I GAMING WIFI, but includes an additional T-Sensor header. The patch was provided via GitHub [1]. [1] https://github.com/zeule/asus-ec-sensors/pull/105 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20260607123626.100630-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: (asus-ec-sensors) add ROG STRIX B650E-E GAMING WIFIVeronika Kossmann
Add support for ROG STRIX B650E-E GAMING WIFI Signed-off-by: Veronika Kossmann <nanodesuu@gmail.com> Co-developed-by: Oleg Tsvetkov <oleg-tsv@yandex.ru> Signed-off-by: Oleg Tsvetkov <oleg-tsv@yandex.ru> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20260607110702.84599-2-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: (raspberrypi) Add voltage input supportShubham Chakraborty
Extend the raspberrypi-hwmon driver to expose firmware-provided voltage measurements through the hwmon subsystem. The driver now exports the following voltage inputs: - in0_input (core) - in1_input (sdram_c) - in2_input (sdram_i) - in3_input (sdram_p) Voltage values returned by firmware are converted from microvolts to millivolts as expected by the hwmon subsystem. Update the documentation related to it. The existing undervoltage sticky alarm handling is preserved and associated with the first voltage channel. Tested in - - Raspberry Pi 3b+ (Linux raspberrypi 6.12.75+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.12.75-1+rpt1 (2026-03-11) aarch64 GNU/Linux) Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20260517080445.103962-3-chakrabortyshubham66@gmail.com [groeck: Added missing empty line after declaration] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: Support guard() and scoped_guard for subsystem locksGuenter Roeck
Add support for guard() and scoped_guard() for the hwmon subsystem lock to simplify its use. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09docs: hwmon: (coretemp) fix outdated documentationRoman Bakshansky
- Remove broken Intel wiki link; add Intel SDM download page link - Fix description of tempX_max to clarify it is not Core2-only - Correct tempX_label string for package temperature (changed in commit 2bc0e6d07ee5 ("hwmon: (coretemp) rearrange tjmax handing code")) Signed-off-by: Roman Bakshansky <bakshansky.lists@gmail.com> Link: https://lore.kernel.org/r/20260517152027.350356-1-bakshansky.lists@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09docs: hwmon: htu31: document debugfs serial_numberChen-Shi-Hong
Document the debugfs serial_number file exposed by the htu31 driver. The driver creates a debugfs entry for the sensor serial number, but the documentation currently only describes the sysfs interface. Signed-off-by: Chen-Shi-Hong <eric039eric@gmail.com> Link: https://lore.kernel.org/r/20260517125320.2196-1-eric039eric@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09Documentation: hwmon: fix typo in heading for max31730Hassan Maazu
Generated heading & link to driver doc for max31730 wrongly named max31790 under hwmon docs. This patch fixes typo so link to max31730 is easily identifiable without confusion with max31790. Signed-off-by: Hassan Maazu <maazudev@proton.me> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/6-vpIVJnccYzmznZMj4zfXmOKnHhtaXdeyJqyqTm3KJwLIEj3iSiWzBVxHnBhkNZHZ8E3KfHn7pYQSt3xrfQOQeN5RCJNnBVwmgyJcaw_zM=@proton.me Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09hwmon: (pmbus/d1u74t) Add Murata D1U74T PSU driverAbdurrahman Hussain
Add PMBUS driver for Murata D1U74T power supplies. Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai> Link: https://lore.kernel.org/r/20260514-d1u74t-v4-2-1f1ee7b002ec@nexthop.ai [groeck: Dropped inappropriate tags; added missing include files] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-06-09Documentation: hwmon: adt7411: document supported sysfs attributesChen-Shi-Hong
The adt7411 driver exposes additional standard hwmon attributes beyond the ones currently listed in Documentation/hwmon/adt7411.rst. Document voltage min/max/alarm attributes, temperature min/max and min_alarm/max_alarm attributes, and the temp2_fault attribute for the external temperature channel. Also update the documentation to clarify that analog inputs in1 and in2 are not available when the external temperature sensor is enabled, and remove the outdated statement claiming that external temperature support and limit registers are unsupported. Signed-off-by: Chen-Shi-Hong <eric039eric@gmail.com> Link: https://lore.kernel.org/r/20260516035245.1604-1-eric039eric@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-01 15:15:49 +0000