| Age | Commit message (Collapse) | Author |
|---|
|
Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
|
|
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than intended
region and enforce alignment on size, to prepare for RZ/G3E support (John
Madieu)
- Fix renesas,r9a08g045s33-pcie 'serr_cor' typo and convert properties from
'description' to 'const' for better validation (John Madieu)
- Add RZ/G3E to DT binding and to driver (John Madieu)
* pci/controller/rzg3s-host:
PCI: rzg3s-host: Add support for RZ/G3E PCIe controller
PCI: rzg3s-host: Add PCIe Gen3 (8.0 GT/s) link speed support
PCI: rzg3s-host: Explicitly set class code for RZ/G3E compatibility
PCI: rzg3s-host: Add SoC-specific configuration and initialization callbacks
PCI: rzg3s-host: Make configuration reset lines optional
PCI: rzg3s-host: Make SYSC register offsets SoC-specific
dt-bindings: PCI: renesas,r9a08g045s33-pcie: Document RZ/G3E SoC
dt-bindings: PCI: renesas,r9a08g045s33-pcie: Fix naming properties
PCI: rzg3s-host: Rework inbound window algorithm for supporting RZ/G3E SoC
PCI: rzg3s-host: Reorder reset assertion during suspend
PCI: rzg3s-host: Fix reset handling in probe error path
# Conflicts:
# drivers/pci/controller/pcie-rzg3s-host.c
|
|
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Increase LTSSM poll time on surprise link down (Manikanta Maddireddy)
- Disable LTSSM after transition to Detect on surprise link down to stop
toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending or
shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not registered in
Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change is
controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0 latency
(Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- During remove, free resources allocated during Endpoint .probe() (Vidya
Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234 erratum
(Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB timeout
(Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side can
bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state from
any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so DMA
driver and Endpoint controller driver can share the interrupt line (Vidya
Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint modes
(Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint mode
(Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya Sagar)
* pci/controller/dwc-tegra194:
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
PCI: tegra194: Disable PERST# IRQ only in Endpoint mode
PCI: tegra194: Don't force the device into the D0 state before L2
PCI: tegra194: Disable LTSSM after transition to Detect on surprise link down
PCI: tegra194: Increase LTSSM poll time on surprise link down
PCI: tegra194: Fix polling delay for L2 state
|
|
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan Zhang)
* pci/controller/dwc-eswin:
PCI: eswin: Add ESWIN PCIe Root Complex driver
dt-bindings: PCI: eswin: Add ESWIN PCIe Root Complex
# Conflicts:
# drivers/pci/controller/dwc/Kconfig
# drivers/pci/controller/dwc/Makefile
|
|
- Add Andes QiLai SoC PCIe host driver support (Randolph Lin)
* pci/controller/dwc-andes-qilai:
PCI: qilai: Add Andes QiLai SoC PCIe host driver support
dt-bindings: PCI: Add Andes QiLai PCIe support
# Conflicts:
# drivers/pci/controller/dwc/Makefile
|
|
- Continue with system suspend even if an Endpoint doesn't respond with
PME_TO_Ack message (Manivannan Sadhasivam)
- Remove the Baikal-T1 controller driver since it never quite became usable
(Andy Shevchenko)
- Set Endpoint MSI-X Table Size in the correct function of a multi-function
device when configuring MSI-X, not in Function 0 (Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Clean up in the dw_pcie_resume_noirq() error path (Manivannan Sadhasivam)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
- Fix type mismatch for kstrtou32_from_user() in debugfs write functions
(Hans Zhang)
* pci/controller/dwc:
PCI: dwc: Fix type mismatch for kstrtou32_from_user() return value
PCI: dwc: Expose PCIe event counters for groups 5 to 7 over debugfs
PCI: dwc: Perform cleanup in the error path of dw_pcie_resume_noirq()
PCI: dwc: ep: Mirror the max link width and speed fields to all functions
PCI: dwc: ep: Fix MSI-X Table Size configuration in dw_pcie_ep_set_msix()
PCI: dwc: Remove not-going-to-be-supported code for Baikal SoC
PCI: dwc: Proceed with system suspend even if the endpoint doesn't respond with PME_TO_Ack message
|
|
Tegra supports PCIe core clock monitoring for any rate changes that may be
happening because of the link speed changes. This is useful in tracking
any changes in the core clock that are not initiated by the software.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-7-mmaddireddy@nvidia.com
|
|
Add bindings support for PCIe endpoint controllers in i.MX94 and i.MX943
SoCs with fallback to the i.MX95 SoC.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260324023036.784466-3-hongxing.zhu@nxp.com
|
|
Commit 1352f58d7c8d ("dt-bindings: PCI: pci-imx6: Add external reference
clock input") that added reference clock to the binding was incomplete.
The constraints for "clocks" and "clock-names" still enforce an incorrect
number of items. Update maxItems for both properties to 6 to match the
actual hardware configuration.
Fixes: 1352f58d7c8d ("dt-bindings: PCI: pci-imx6: Add external reference clock input")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260324023036.784466-2-hongxing.zhu@nxp.com
|
|
The six PCIe controllers found on Tegra264 are of two types: one is used
for the internal GPU and therefore is not connected to a UPHY and the
remaining five controllers are typically routed to a PCI slot and have
additional controls for the physical link.
While these controllers can be switched into endpoint mode, this binding
describes the root complex mode only.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Sky1 PCIe controller resides in a dedicated power domain managed
via SCMI. Add the power-domains property to the binding to allow
describing this dependency.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260313114914.1564115-2-gary.yang@cixtech.com
|
|
Add Device Tree binding documentation for the ESWIN PCIe Root Complex. The
Root Complex is based on Synopsys Designware PCIe IP.
Signed-off-by: Yu Ning <ningyu@eswincomputing.com>
Signed-off-by: Yanghui Ou <ouyanghui@eswincomputing.com>
Signed-off-by: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
[mani: Renamed 'EIC7700' to 'ESWIN']
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add driver tag in subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260227111732.1979-1-zhangsenchuan@eswincomputing.com
|
|
Extend the existing device tree bindings for Renesas RZ/G3S PCIe
controller to include support for the RZ/G3E (renesas,r9a09g047e57-pcie)
PCIe controller. The RZ/G3E PCIe controller is similar to RZ/G3S but has
some key differences:
- Uses a different device ID
- Supports PCIe Gen3 (8.0 GT/s) link speeds
- Uses a different clock naming (clkpmu vs clkl1pm)
- Has a different set of interrupts, interrupt ordering, and reset
signals
Add device tree bindings for renesas,r9a09g047e57-pcie compatible IPs.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260306143423.19562-7-john.madieu.xa@bp.renesas.com
|
|
Fix a typo in interrupt-names: "ser_cor" should be "serr_cor" (System
Error Correctable).
Also convert interrupt-names, clock-names, and reset-names properties
from "description" to "const" to enable proper validation with
dtbs_check.
Fixes: e7534e790557 ("dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260306143423.19562-6-john.madieu.xa@bp.renesas.com
|
|
Add the Andes QiLai PCIe node, which includes 3 Root Complexes.
Only one example is required in the DTS bindings YAML file.
Signed-off-by: Randolph Lin <randolph@andestech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260225085504.3757601-2-randolph@andestech.com
|
|
As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Link: https://patch.msgid.link/20260220142600.2397070-1-andriy.shevchenko@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
|
- Add DT binding and driver support for SA8255p Endpoint being managed by
firmware (Mrinmay Sarkar)
* pci/controller/dwc-qcom-ep:
PCI: qcom-ep: Add support for firmware-managed PCIe Endpoint
dt-bindings: PCI: qcom,sa8255p-pcie-ep: Document firmware managed PCIe endpoint
|
|
- Add DT binding and driver support for an optional external refclock in
addition to the refclock from the internal PLL (Richard Zhu)
- Apply i.MX95 ERR051586 erratum workaround (release CLKREQ# so endpoint
can assert it when required) during resume (Richard Zhu)
- Enable i.MX95 REFCLK by overriding CLKREQ# so it's driven by default
(Richard Zhu)
- Clear CLKREQ# override if link is up and DT says 'supports-clkreq' so
endpoints can use CLKREQ# to exit the L1.2 state (Richard Zhu)
* pci/controller/dwc-imx6:
PCI: imx6: Clear CLKREQ# override if 'supports-clkreq' DT property is available
PCI: imx6: Add CLKREQ# override to enable REFCLK for i.MX95 PCIe
PCI: dwc: Invoke post_init in dw_pcie_resume_noirq()
PCI: imx6: Add external reference clock input mode support
dt-bindings: PCI: pci-imx6: Add external reference clock input
dt-bindings: PCI: dwc: Add external reference clock input
|
|
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
* pci/controller/aspeed:
MAINTAINERS: Add ASPEED PCIe RC driver
PCI: aspeed: Add ASPEED PCIe RC driver
PCI: Add FMT, TYPE and CPL status definition for TLP header
dt-bindings: PCI: Add ASPEED PCIe RC support
|
|
Fix email addresses with spaces or missing brackets. A pending
dtschema meta-schema change will check for these.
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260126164724.2832009-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
On the Qualcomm Glymur platform the PCIe host is compatible with the DWC
controller present on the X1E80100 platform. So document the PCIe
controllers found on Glymur and use the X1E80100 compatible string as a
fallback in the schema.
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250825-glymur_pcie5-v3-2-5c1d1730c16f@oss.qualcomm.com
|
|
Document the required configuration to enable the PCIe Endpoint controller
on SA8255p which is managed by firmware using power-domain based handling.
Signed-off-by: Mrinmay Sarkar <mrinmay.sarkar@oss.qualcomm.com>
[mani: added MAINTAINERS entry]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260106-firmware_managed_ep-v5-1-1933432127ec@oss.qualcomm.com
|
|
Loongson PCI controllers found in LS2K1000/2000 SoCs
(loongson,ls2k-pci), 7A1000/2000 bridge chips (loongson,ls7a-pci), and
RS780E bridge chips (loongson,rs780e-pci) all have their paired MSI
controllers.
Though only the one in LS2K2000 SoC is described in devicetree, we
should document the property for all variants. For the same reason, it
isn't marked as required for now.
Fixes: 83e757ecfd5d ("dt-bindings: Document Loongson PCI Host Controller")
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251209140006.54821-3-me@ziyao.cc
|
|
Add compatible string for MediaTek MT7981 PCIe Gen3 controller.
The MT7981 PCIe controller is compatible with the MT8192 PCIe
controller.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251223-openwrt-one-network-v5-1-7d1864ea3ad5@collabora.com
|
|
Move APQ8084 PCIe devices from qcom,pcie.yaml binding to a dedicated
file to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
After moving the qcom,pcie.yaml becames empty thus can be entirely
removed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-12-873721599754@oss.qualcomm.com
|
|
Move MSM8996 PCIe devices from qcom,pcie.yaml binding to a dedicated
file to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
- Expecting eight MSI interrupts and one global, instead of only one,
which was incomplete hardware description.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-11-873721599754@oss.qualcomm.com
|
|
Move APQ8064 and IPQ8064 PCIe devices from qcom,pcie.yaml binding to a
dedicated file to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-10-873721599754@oss.qualcomm.com
|
|
Move IPQ9574 and compatible PCIe devices from qcom,pcie.yaml binding to
a dedicated file to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
- Make last "reg" entry "mhi" a required one, because all in-tree DTS
were updated to include it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-9-873721599754@oss.qualcomm.com
|
|
Move IPQ4019 PCIe devices from qcom,pcie.yaml binding to a dedicated
file to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-8-873721599754@oss.qualcomm.com
|
|
Move IPQ8074 PCIe devices from qcom,pcie.yaml binding to a dedicated
file to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
- Expecting eight MSI interrupts and one global, instead of only one,
which was incomplete hardware description.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-7-873721599754@oss.qualcomm.com
|
|
dedicated schema
Move IPQ6018 and IPQ8074 Gen3 (which is the same as in IPQ6018) PCIe
devices from qcom,pcie.yaml binding to a dedicated file to make
reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
- Disallow legacy/incomplete description with only one interrupt and
expect exactly nine of them.
- Do not require power domains on IPQ6018, because old binding already
does not require them for IPQ8074 Gen3, devices are the same and
in-tree DTS lacks power domains.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-6-873721599754@oss.qualcomm.com
|
|
Move IPQ5018 PCIe devices from qcom,pcie.yaml binding to a dedicated
file to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-5-873721599754@oss.qualcomm.com
|
|
Move QCS404 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-4-873721599754@oss.qualcomm.com
|
|
Move SDM845 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
- Expecting eight MSI interrupts and one global, instead of only one,
which was incomplete hardware description.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-3-873721599754@oss.qualcomm.com
|
|
Move SDX55 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
- Adding interrupts based on the DTS, which were missing in the
all-in-one binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-2-873721599754@oss.qualcomm.com
|
|
After the commit 26daa18e35eb ("dt-bindings: PCI: qcom,pcie-sc8180x:
Drop unrelated clocks from PCIe hosts") and the
commit e1cb67ab82aa ("dt-bindings: PCI: qcom,pcie-sm8150: Drop unrelated
clocks from PCIe hosts"), which dropped two clocks from each of the
bindings, the devices share entire binding and could be kept in one file
for simplicity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-dt-bindings-pci-qcom-v2-1-873721599754@oss.qualcomm.com
|
|
The child node name in use by .dts files and the driver is
"legacy-interrupt-controller", not "interrupt-controller".
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://patch.msgid.link/20251215212456.3317558-1-robh@kernel.org
|
|
ASPEED AST2600 provides one PCIe RC with 5GT/s and AST2700 provides three
PCIe RC for two 16GT/s and one 5GT/s. All of these RCs have just one Root
Port to connect to PCIe device. And also have Mem, I/O access, legacy
interrupt and MSI.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251216-upstream_pcie_rc-v7-2-4aeb0f53c4ce@aspeedtech.com
|
|
i.MX95 PCIes have two reference clock inputs: one from internal PLL.
It's wired inside chip and present as "ref" clock. It's not an optional
clock. The other from off chip crystal oscillator. The "extref" clock
refers to a reference clock from an external crystal oscillator through
the CLKIN_N/P pair PADs. It is an optional clock, relied on the board
design.
Add additional optional external reference clock input for i.MX95 PCIes.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251211064821.2707001-3-hongxing.zhu@nxp.com
|
|
Add external reference clock input "extref" for a reference clock that
comes from external crystal oscillator.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251211064821.2707001-2-hongxing.zhu@nxp.com
|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)
- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)
Resource management:
- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)
Power management and error handling:
- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)
Power control:
- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)
Endpoint framework:
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)
New native PCIe controller drivers:
- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)
- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)
- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)
Amlogic Meson PCIe controller driver:
- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)
Broadcom STB PCIe controller driver:
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)
Cadence PCIe controller driver:
- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)
MediaTek PCIe controller driver:
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)
Qualcomm PCIe controller driver:
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)
- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
STMicroelectronics STM32MP25 PCIe controller driver:
- Fix a race between link training and endpoint register
initialization (Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
Synopsys DesignWare PCIe controller driver:
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)
- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)
TI Keystone PCIe controller driver:
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"
* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...
|
|
- Add a struct pci_ops.assert_perst() function pointer to assert/deassert
PCIe PERST# and implement it for the qcom driver (Krishna Chaitanya
Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe switch,
which must be held in reset after poweron so the pwrctrl driver can
configure the switch via I2C before bringing up the links (Krishna
Chaitanya Chundru)
* pci/pwrctrl-tc9563:
PCI: pwrctrl: Add power control driver for TC9563
PCI: qcom: Implement .assert_perst()
PCI: dwc: Implement .assert_perst() for dwc glue drivers
PCI: Add .assert_perst() to control PCIe PERST#
dt-bindings: PCI: Add binding for Toshiba TC9563 PCIe switch
|
|
- Add DT binding and driver for SpacemiT K1 (Alex Elder)
* pci/controller/spacemit-k1:
PCI: spacemit: Add SpacemiT PCIe host driver
dt-bindings: pci: spacemit: Introduce PCIe host controller
|
|
- Add module support for platform controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) (Manikandan K
Pillai)
- Add DT binding and driver for CIX Sky1 (Hans Zhang)
* pci/controller/sky1:
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
PCI: cadence: Move PCIe RP common functions to a separate file
PCI: cadence: Split PCIe controller header file
PCI: cadence: Add module support for platform controller driver
|
|
- Add NXP S32G host controller DT binding and driver (Vincent Guittot)
* pci/controller/s32g:
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
|
|
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea)
* pci/controller/rzg3s-host:
PCI: Add Renesas RZ/G3S host controller driver
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
|
|
- Update DT binding to name DBI region "dbi", not "elbi", and update driver
to support both (Manivannan Sadhasivam)
* pci/controller/meson:
PCI: meson: Fix parsing the DBI register region
dt-bindings: PCI: amlogic: Fix the register name of the DBI region
|
