| Age | Commit message (Collapse) | Author |
|---|
|
Convert the Hisilicon DesignWare Mobile Storage Host Controller
(dw-mshc) bindings from text format to DT schema.
As part of this conversion, the binding file is renamed from
k3-dw-mshc.txt to hisilicon,hi3660-dw-mshc.yaml to align with compatible
string naming conventions. Examples have been updated to pass schema
validation.
Note: synopsys-dw-mshc binding specifies clock names as "biu" followed
by "ciu". However, this Hisilicon binding reverses the order to 'ciu'
then 'biu' to match both the legacy text binding and in-kernel Hisilicon
DTS board files.
Signed-off-by: Bhargav Joshi <rougueprince47@gmail.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The IPQ9650 supports eMMC with an SDHCI controller. Add the appropriate
compatible to the documentation.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add amlogic,t7-mmc compatible string, falling back to amlogic,meson-axg-mmc
as the T7 MMC controller is compatible with the AXG implementation.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
AST2700 SDHCI controller is fully compatible with AST2600.
However, it is necessary to take the AST2700 SD controller out of
reset, so require the 'resets' property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Canaan k230 uses the SDHCI from Synopsys. Add compatible strings
to the k230. The k230 has two controllers. MMC0 supports eMMC, while
MMC1 supports SDIO.
Signed-off-by: Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the 'hpe,gsc-dwcmshc' compatible string for the HPE GSC (ARM64
Cortex-A53) BMC SoC eMMC controller.
The HPE GSC requires access to the MSHCCS register in the SoC system
register block to configure SCG sync disable for HS200 RX delay-line
phase selection. The required 'hpe,gxp-sysreg' property takes a
phandle to the existing 'hpe,gxp-sysreg' syscon and the MSHCCS
register offset within that block.
The HPE GSC eMMC interface only exposes a single 'core' clock (no
bus clock), so clocks/clock-names are constrained to a single item.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
RV1103B uses the same DesignWare MSHC controller IP version as RK3576.
They have no "ciu-drive" nor "ciu-sample" clocks and use the phase
tuning inside the controller.
Fix it accordingly.
Fixes: 517b1e3c9455 ("dt-bindings: mmc: rockchip-dw-mshc: Add RV1103B compatible")
Suggested-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The IPQ5210 supports eMMC with an SDHCI controller. Add the appropriate
compatible to the documentation.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add compatible string "nxp,s32n79-usdhc" for the uSDHC controller found in
NXP S32N79 series automotive SoCs.
Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add "loongson,ls2k0300-mmc" dedicated compatible to represent the
eMMC/SD/SDIO controller interface of the Loongson-2K0300 chip.
Its hardware design is similar to that of the Loongson-2K2000, but it
suffers from hardware defects such as missing CMD48 interrupts.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The mux branch contains updates to the mux core along with some
corresponding changes for a couple of consumer drivers, including an mmc
driver. Let's merge it into the next branch to get it tested and queued for
the next release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add mux controller support for data or control lines that are muxed
between a host and multiple cards.
There are several devices supporting a choice of eMMC or SD on a single
board by both dip switch and gpio, e.g. Renesas RZ/G2L SMARC SoM and
SolidRun RZ/G2L SoM.
In-tree dts for the Renesas boards currently rely on preprocessor macros
and gpio hogs to describe the respective cards.
By adding mux-states property to sdhi controller description, boards can
correctly describe the mux that already exists in hardware - and drivers
can coordinate between mux selection and probing for cards.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The binding defines tuple-style reset-names items for some
compatibles, which implicitly enforces a fixed array length
via JSON Schema.
Defining global maxItems for resets and reset-names causes these
constraints to be intersected via allOf, resulting in an effective
minItems equal to the global maxItems. This leads to dtbs_check
failures reporting reset arrays as too short, even when the DTS
provides the correct number of entries.
Fixes: 30009a21f257 ("dt-bindings: mmc: sdhci-of-dwcmshc: Add Eswin EIC7700")
Co-developed-by: Pritesh Patel <pritesh.patel@einfochips.com>
Signed-off-by: Pritesh Patel <pritesh.patel@einfochips.com>
Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The RV1103B uses the DesignWare MSHC controller compatible with the
existing Rockchip RK3288 variant. Add the rockchip,rv1103b-dw-mshc
compatible string.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add compatible strings for Axiado AX3000 SoC eMMC controller which
is based on Arasan eMMC controller.
Signed-off-by: SriNavmani A <srinavmani@axiado.com>
Signed-off-by: Tzu-Hao Wei <twei@axiado.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add device tree bindings for the Black Sesame Technologies
DWCMSHC SDHCI controller used in C1200 SoC.
The binding describes a Synopsys DesignWare Cores Mobile Storage
Host Controller with BST-specific extensions including:
- Two register regions (core SDHCI and CRM registers)
- Optional memory-region for bounce buffer support
- Fixed clock input
Signed-off-by: Ge Gordon <gordon.ge@bst.ai>
Signed-off-by: Albert Yang <yangzh0906@thundersoft.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SDHCI controller found on SpacemiT K3 SoC share the same IP with
K1 generation, while fixed the broken 64BIT DMA issue. Introduce a
compatible string to enable support for it.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
As a proper noun PrimeCell is a single entity and it can not have a plural
form, fix the typo.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SpacemiT SDHCI controller has two reset lines, one connect to AXI bus
which shared by all controllers, while another one connect to individual
controller separately.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Arasan SDHCI controller is DMA coherent on the APM merlin SoC, so allow
the dma-coherent property. No reason implementations can't also be coherent
and there's not an SoC specific compatible, so allow it on any platform.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Broadcom iProc SDHCI controller is DMA coherent and/or behind an IOMMU
on some Broadcom SoCs, so allow the dma-coherent and iommus properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The AMD Pensando ELBA DT defines no reset for the SDHCI, so it is obviously
not required.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add a new compatible for MMC IP in MT8189 SoC.
Even though this is partially compatible with the one found in MT8196
SoC, the MT8189 SoC register layout has some slight differences and
additional features.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
SPI NAND
- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.
Other changes are small fixes.
|
|
The partitions.yaml schema is an unusual structure in that it includes
all possible partition types, and it disables the normal matching by
compatible strings. As partitions.yaml has nothing to match on, it is
only applied when explicitly referenced. The use of "oneOf" also results
in misleading warnings which are difficult to understand. Drop
partitions.yaml and rely on the standard compatible matching instead.
The "mmc-card" case previously allowed any partition type, but now only
allows "fixed-partitions". There aren't any users and the original
intent appeared to be only for "fixed-partitions".
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci-esdhc-imx: Fix build problem dependency
- sdhci-of-arasan: Increase card-detect stable timeout to 2 seconds
- sdhci-of-aspeed: Fix DT doc for missing properties
* tag 'mmc-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: add alternate ARCH_S32 dependency to Kconfig
mmc: sdhci-of-arasan: Increase CD stable timeout to 2 seconds
dt-bindings: mmc: sdhci-of-aspeed: Switch ref to sdhci-common.yaml
|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Enable use of common SDHCI-related properties such as sdhci-caps-mask as
found in the AST2600 EVB DTS.
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
|
Common boolean properties need to be only allowed in the binding
(":true"), because their type is already defined by core DT schema.
Simplify dma-coherent property to match common syntax.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert SOCIONEXT Milbeaut SDHCI controller binding to YAML format.
Add a new property "voltage-ranges" to resolve dt_check errors.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert TI Highspeed MMC host controller binding to YAML format. Define
'clocks' and 'interrupts' properties to resolve errors identified by
'dt_check' and 'dtb_check'.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
EIC7700 use Synopsys dwcmshc IP for SD/eMMC controllers.
Add Eswin EIC7700 support in sdhci-of-dwcmshc.yaml.
Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert TI OMAP SDHCI Controller binding to YAML format.
Changes during Conversion:
- Define new properties like "clocks", "clock-names",
"pbias-supply" and "power-domains" to resolve dtb_check errors.
- Remove "pinctrl-names" and "pinctrl-<n>"
from required as they are not necessary for all DTS files.
- Remove "ti,hwmods" property entirely from the YAML as the
DTS doesn't contain this property for the given compatibles and the
text binding is misleading.
- Add "clocks", "clock-names" and "max-frequency" to the required
properties based on the compatible and the text binding doesn't mention
these properties as required.
- Add missing strings like "default-rev11", "sdr12-rev11", "sdr25-rev11",
"hs-rev11", "sdr25-rev11" and "sleep" to pinctrl-names string array
to resolve errors detected by dtb_check.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251024-ti-sdhci-omap-v5-3-df5f6f033a38@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The dw-mshc controller in the RK3506 is compatible to the one first found
in the RK3288 SoC, so add the RK3506 to the variant list.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Updating compatibility to support BCM72116 and BCM74371 SD host controller
similar to other settop SoCs.
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document the compatible string for the SDHCI controller on the
sm8750 platform.
Signed-off-by: Sarthak Garg <sarthak.garg@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document the compatible string for the SDHCI controller on the
Kaanapali platform.
Signed-off-by: Manish Pandey <manish.pandey@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Allow child nodes on renesas-bsc bus binding
- Drop node name pattern on allwinner,sun50i-a64-de2 bus binding
- Switch DT patchwork to kernel.org from ozlabs.org
- Fix some typos in docs and bindings
- Fix reference count in PCI node unittest
* tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: bus: renesas-bsc: allow additional properties
dt-bindings: bus: allwinner,sun50i-a64-de2: don't check node names
MAINTAINERS: Move DT patchwork to kernel.org
of: unittest: Fix device reference count leak in of_unittest_pci_node_verify
of: doc: Fix typo in doc comments.
dt-bindings: mmc: Correct typo "upto" to "up to"
|
|
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
|
|
The word "upto" is a typo for "up to". Correct this typo in the
mmc-controller-common binding documentation.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add samsung,exynos8890-dw-mshc-smu specific compatible to the bindings
documentation. Since Samsung, as usual, likes reusing devices from older
designs, use the samsung,exynos7-dw-mshc-smu compatible.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Introduce a new optional device tree property max-sd-hs-hz to
limit the maximum frequency (in Hz) used for SD cards operating in
High-Speed (HS) mode due to any board electrical limitations.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the MSM SDHCI compatible name to support both eMMC and SD card for
Lemans, which uses 'sa8775p' as the fallback SoC. Ensure the new
compatible string matches existing Lemans-compatible formats without
introducing a new naming convention.
The SDHCI controller on Lemans is based on MSM SDHCI v5 IP. Hence,
document the compatible with "qcom,sdhci-msm-v5" as the fallback.
Signed-off-by: Monish Chunara <quic_mchunara@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some older boards only require a default pinctrl. Add a minItems
property so these don't cause dt-validate warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509030625.PBgLIAwG-lkp@intel.com/
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Broadcom BRCMSTB SDHCI Controller device supports Common
properties in terms of Capabilities.
Reference sdhci-common schema instead of mmc-controller in order
for capabilities to be specified in DT nodes avoiding warnings
from the DT compiler.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/181cc905566f2d9b2e5076295cd285230f81ed07.1756386531.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
On the pxav3 controller, increasing the drive strength of the data pins
might be required to maintain stability on fast bus clocks (above 100
MHz). Add a state_uhs pinctrl to allow this.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Link: https://lore.kernel.org/r/20250821-pxav3-uhs-v4-1-bb588314f3c3@dujemihanovic.xyz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Even though it is referenced by mmc/mmc-controller.yaml it still raises
the warning:
esdhc@1560000 (fsl,ls1021a-esdhc): Unevaluated properties are not allowed ('bus-width' was unexpected)
Adding an explicit reference fixes this.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250725060152.262094-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
