| Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers
* tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (72 commits)
Input: mms114 - fix touch indexing for MMS134S and MMS136
Input: elan_i2c - prevent division by zero and arithmetic underflow
Input: stop force-feedback timer when unregistering input devices
Input: iforce - bound the device-reported force-feedback effect index
Input: goodix - clamp the device-reported contact count
Input: mms114 - reject an oversized device packet size
Input: touchwin - reset the packet index on every complete packet
Input: rmi4 - update formatting in F12
Input: rmi4 - propagate proper error code in F12 sensor tuning
Input: rmi4 - simplify size calculations in F12
Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocators
Input: rmi4 - use devm_kmalloc for F12 data packet buffer
Input: rmi4 - use flexible array member for IRQ masks in F12
Input: rmi4 - use unaligned access helpers in F12
Input: rmi4 - change reg_size type to u32
Input: rmi4 - refactor F12 probe function
Input: rmi4 - use kzalloc_flex() for struct rmi_function
Input: rmi4 - refactor function allocation and registration
Input: rmi4 - use local presence map in rmi_read_register_desc()
Input: rmi4 - fix limit in rmi_register_desc_has_subpacket()
...
|
|
Sync up with mainline to pull in a fix to IMS PCU driver and other
enhancements.
|
|
Add bindings for Wacom W9002 and two Wacom W9007 variants which can be
found in tablets.
W9002, W9007A LT03, and W9007A V1 differ in the length of the return
message containing coordinates, distance, pressure and button status.
Co-developed-by: Ferass El Hafidi <funderscore@postmarketos.org>
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Signed-off-by: Hendrik Noack <hendrik-noack@gmx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260528074818.12151-2-hendrik-noack@gmx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
YAML literal block scalars cannot use tabs for indent.
Replace tab separators (mostly between values and trailing /* ... */
comments) with single spaces.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/2044ee0cac191c7be8b6e989fc3c99b24aa4cc5e.1777434096.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
FTS has associated reset GPIO, document it.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-stmfts5-v4-7-64fe62027db5@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC updates from Arnd Bergmann:
"These are the contents that arrived during the easter vacation and
didn't make it into the last 7.0 bugfixes or the first set of branches
for the merge window. Aside from a reset controller bugfix and an
update to the MAINTAINERS entry, this is all devicetree changes.
The Marvell devicetree updates contain the usual minor updates and
bugfixes, along with a two larger but trivial patches to drop unused
dtsi files, the single broadcom fix addresses a build time warning
introduced during the merge window.
The freescale, amlogic, and apple changes missed the last fixes branch
for 7.0"
* tag 'soc-late-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number
arm64: dts: amlogic: meson-axg: Add missing cache information to cpu0
arm64: dts: amlogic: t7: khadas-vim4: fix board model name
arm64: dts: amlogic: Fix GIC register ranges for Amlogic T7
arm64: dts: amlogic: t7: khadas-vim4: fix memory layout for 8GB RAM
arm64: dts: amlogic: s6: Drop CPU masks from GICv3 PPI interrupts
Documentation/process: maintainer-soc: Document purpose of defconfigs
Documentation/process: maintainer-soc: Trim from trivial ask-DT
ARM: dts: bcm4709: fix bus range assignment
arm64: dts: apple: Fix spelling error
dt-bindings: Update Sasha Finkelstein's email address
mailmap: Update Sasha Finkelstein's email address
arm64: dts: marvell: armada-37xx: swap PHYs' order in USB3 controller node
arm64: dts: marvell: armada-37xx: use 'usb2-phy' in USB3 controller's phy-names
arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT
reset: amlogic: t7: Fix null reset ops
arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups
* tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (101 commits)
Input: charlieplex_keypad - add GPIO charlieplex keypad
dt-bindings: input: add GPIO charlieplex keypad
dt-bindings: input: add settling-time-us common property
dt-bindings: input: add debounce-delay-ms common property
Input: imx_keypad - fix spelling mistake "Colums" -> "Columns"
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
Input: ct82c710 - remove driver
Input: mk712 - remove driver
Input: logibm - remove driver
Input: inport - remove driver
Input: qt1070 - inline i2c_check_functionality check
Input: qt1050 - inline i2c_check_functionality check
Input: aiptek - validate raw macro indices before updating state
Input: gf2k - skip invalid hat lookup values
Input: xpad - add RedOctane Games vendor id
Input: xpad - remove stale TODO and changelog header
Input: usbtouchscreen - refactor endpoint lookup
Input: aw86927 - add support for Awinic AW86938
dt-bindings: input: awinic,aw86927: Add Awinic AW86938
...
|
|
Change the bindings that list my address
Signed-off-by: Sasha Finkelstein <k@chaosmail.tech>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260411-mailmap-v1-2-5a519f7b00b5@chaosmail.tech
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Document FocalTech FT3519 support by adding the compatible. It's 10
point touchscreen, which is compatible with FT3518
Signed-off-by: Bhushan Shah <bhushan.shah@machinesoul.in>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314-edt-ft3519-v3-1-5ee91b408ed6@machinesoul.in
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Majority of schemas place allOf: after required: . Documentation
Documentation/devicetree/bindings/writing-schema.rst also hints at
this ordering. Trivially update this schema. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260312224925.186077-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the TS-4800 touchscreen bindings to DT schema.
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260316181038.9771-1-egbostina@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert fsl-mx25-tcq.txt to yaml.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260211-yaml_mfd-v1-1-05cb48bc6f09@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.
|
|
Document the 'wakeup-source' property for Sitronix ST1232 touchscreen
controllers to allow the device to wake the system from suspend.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260309000319.74880-2-phucduc.bui@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for FocalTech FT8112 added to i2c-hid driver
- support for FocalTech FT3518 added to edt-ft5x06 driver
- support for power buttons in TWL603x chips added to twl4030-pwrbutton
driver
- an update to gpio-decoder driver to make it usable on non-OF
platforms and to clean up the code
- an update to synaptics_i2c driver switching it to use managed
resources and a fix to restarting polling after resume
- an update to gpio-keys driver to fall back to getting IRQ from
resources if not specified using other means
- an update to ili210x driver to support polling mode
- a number of input drivers switched to scnprintf() to suppress
truncation warnings
- a number of updates and conversions of device tree bindings to yaml
format
- fixes to spelling in comments and messages in several drivers
- other assorted fixups
* tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU
dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038
Input: apbps2 - fix comment style and typos
Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys
Input: novatek-nvt-ts - drop wake_type check
dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells'
Input: ili210x - add support for polling mode
dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek
Input: appletouch - fix potential race between resume and open
HID: i2c-hid: Add FocalTech FT8112
dt-bindings: input: i2c-hid: Introduce FocalTech FT8112
Input: synaptics_i2c - switch to using managed resources
Input: synaptics_i2c - guard polling restart in resume
Input: gpio_decoder - don't use "proxy" headers
Input: gpio_decoder - make use of the macros from bits.h
Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep()
Input: gpio_decoder - unify messages with help of dev_err_probe()
Input: gpio_decoder - make use of device properties
Input: serio - complete sizeof(*pointer) conversions
Input: wdt87xx_i2c - switch to use dev_err_probe()
...
|
|
Imagis IST3038 provides touch keys. Allow linux,keycodes for ist3038.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251224100941.3356201-1-raymondhackley@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: Anberic RG-DS game console, Radxa CM3J module + baseboard
for the Rpi CM4 IO board, QNAP TS133 from the RK3568 NAS series.
2 display outputs for the Lion board (old RK3368), TPS65185 pmic for the
PineNote and fixes for the PCIe ranges on both RK356x and RK3588.
These came quite late, so I wanted to give them the time till 6.20-rc1
and have them migrate to stable-kernels afterwards.
The rest is small stuff on a number of boards wrt gpios and compatibles.
* tag 'v6.20-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (25 commits)
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
arm64: dts: rockchip: Fix rk356x PCIe range mappings
arm64: dts: rockchip: Add Anbernic RG-DS
dt-bindings: input: touchscreen: goodix: Add "panel" property
dt-bindings: arm: rockchip: Add Anbernic RG-DS
arm64: dts: rockchip: Explicitly request UFS reset pin on RK3576
arm64: dts: rockchip: Add TPS65185 for PineNote
arm64: dts: rockchip: Do not enable hdmi_sound node on Pinebook Pro
arm64: dts: rockchip: Fix imx258 variant on pinephone pro
arm64: dts: rockchip: Add the Video-Demo overlay for Lion Haikou
arm64: dts: rockchip: Enable pwm1 on rk3368-lion-haikou
arm64: dts: rockchip: Enable HDMI output on RK3368-Lion-Haikou
arm64: dts: rockchip: Add HDMI node to RK3368
arm64: dts: rockchip: Use phandle for i2c_lvds_blc on rk3368-lion haikou
arm64: dts: rockchip: Fix SD card support for RK3576 Nanopi R76s
arm64: dts: rockchip: Fix SD card support for RK3576 EVB1
arm64: dts: rockchip: Add Radxa CM3J on RPi CM4 IO Board
arm64: dts: rockchip: Add Radxa CM3J
dt-bindings: arm: rockchip: Add Radxa CM3J on RPi CM4 IO Board
arm64: dts: rockchip: Make eeprom read-only for Radxa ROCK 3C/5A/5C
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The tsc2007 can be used not only as resistive touchscreen controller but
also as a ADC IIO sensor. The second use case requires '#io-channel-cells'
property, hence add it.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260122193549.29858-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add a "panel" property to define a relationship between a touchscreen
and an associated panel when more than one of each exist in a device.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
[picked with the rest with Dmitry's Ack]
Link: https://patch.msgid.link/20260113195721.151205-6-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
old Ilitek
The old Ilitek touch controllers V3 and V6 can operate without
interrupt line, in polling mode. Drop the 'interrupts' property
requirement for those four controllers. To avoid overloading the
trivial-touch, fork the old Ilitek V3/V6 touch controller binding
into separate document.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260121230736.114623-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Document FocalTech FT3518 support by adding the compatible.
Co-developed-by: Kamil Gołda <kamil.golda@protonmail.com>
Signed-off-by: Kamil Gołda <kamil.golda@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yedaya Katsman <yedaya.ka@gmail.com>
Link: https://patch.msgid.link/20260118-touchscreen-patches-v3-1-1c6a729c5eb4@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add the Sitronix ST1624 which is compatible with ST1633.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251215212524.3318311-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- DT bindings for Melfas MIP4 touchscreen controller and TWL4030 keypad
have been converted to the DT schema
- simple touch controller bindings have been consolidated to
trivial-touch.yaml DT schema
- memory allocation failure noise was removed from qnap-mcu-input and
zforce_ts dirvers
- ti_am335x_tsc driver was hardened to handle invalid (too large)
number of coordinates specified in device tree
- a cleanup in Cypress cyttsp5 driver to use %pe to print error code
* tag 'input-for-v6.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - clamp coordinate_readouts to DT maximum (6)
dt-bindings: touchscreen: consolidate simple touch controller to trivial-touch.yaml
dt-bindings: touchscreen: trivial-touch: add reset-gpios and wakeup-source
dt-bindings: input: ti,twl4030-keypad: convert to DT schema
Input: zforce_ts - omit error message when memory allocation fails
Input: qnap-mcu-input - omit error message when memory allocation fails
dt-bindings: input: Convert MELFAS MIP4 Touchscreen to DT schema
dt-bindings: touchscreen: move ar1021.txt to trivial-touch.yaml
dt-bindings: touchscreen: rename maxim,max11801.yaml to trivial-touch.yaml
Input: cyttsp5 - use %pe format specifier
|
|
Update Krzysztof Kozlowski's email address to kernel.org account to stay
reachable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251021095354.86455-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
trivial-touch.yaml
Move azoteq,iqs5xx.yaml, himax,hx83112b.yaml, hynitron,cstxxx.yaml,
ilitek_ts_i2c.yaml, semtech,sx8654.yaml, ar1021.txt to trivial-touch.yaml
to consolidate simple touch yaml binding to one file.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251021201924.2881098-2-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add optional reset-gpios and wakeup-source properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251021201924.2881098-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the existing text-based DT bindings for MELFAS MIP4 Touchscreen
controller to a DT schema.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251001183809.83472-1-ariel.dalessandro@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
ar1021 have only reg and interrupts property beside touch common
properties. So move context of ar1021.txt into trivial-touch.yaml.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250926184720.391335-2-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Rename maxim,max11801.yaml to trivial-touch.yaml for simple i2c touch
controller with one interrupt and common touch properties.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250926184720.391335-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
With commit 1d6204e2f51f ("dt-bindings: touchscreen: Add touchscreen
schema") touchscreen.txt is no longer needed, and since no other file
refers to it, it can be safely removed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250925153144.4082786-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert Raspberry Pi firmware 7" touchscreen controller device tree
binding to json-schema.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250925153144.4082786-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert EETI touchscreen controller device tree binding to json-schema.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250925153144.4082786-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add documentation for Hynitron CST816x series touchscreen bindings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Oleh Kuzhylnyi <kuzhylol@gmail.com>
Link: https://lore.kernel.org/r/20250921125939.249788-1-kuzhylol@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Support the debounce-delay-us property.
Drivers must convert this value to IPG clock cycles and map it to one of
the four discrete thresholds exposed by the TSC_DEBUG_MODE2 register:
0: 8191 IPG cycles
1: 4095 IPG cycles
2: 2047 IPG cycles
3: 1023 IPG cycles
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250923143746.2857292-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add support for glitch delay configuration. A detected signal is valid
only if it remains stable longer than the configured delay; otherwise,
it is considered a glitch.
This property was introduced for the i.MX6UL touchscreen controller (TSC),
which provides a hardware deglitch filter with four thresholds depending
on the IPG clock frequency. In this use case, the IPG clock rate is 66 MHz,
resulting in thresholds of 124 µs, 62 µs, 31 µs, and 15 µs, which requires
a property with microsecond-level resolution.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250923143746.2857292-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert Zeitec ZET6223 touchscreen controller device tree binding to
json-schema.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250918153630.2535208-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert Rohm BU21013 I2C touchscreen controller device tree binding to
json-schema.
Additional changes:
- Replace <supply_name>-supply with avdd-supply to match example and
existing DTS.
- Add reset-gpios in the example because it is required.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250918153630.2535208-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Change additionalProperties to unevaluatedProperties because it refs to
touchscreen.yaml.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt6.dtb: touchscreen (resistive-adc-touch): 'touchscreen-y-plate-ohms' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250910224402.994046-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Himax HX852x(ES) is a touch panel controller with optional support
for capacitive touch keys.
Unfortunately, the model naming is quite unclear and confusing. There
seems to be a distinction between models (e.g. HX8526) and the "series"
suffix (e.g. -A, -B, -C, -D, -E, -ES). But this doesn't seem to be
applied very consistently because e.g. HX8527-E(44) actually seems to
belong to the -ES series.
The compatible consists of the actual part number followed by the
"series" as fallback compatible. Typically only the latter will be
interesting for drivers as there is no relevant difference on the
driver side.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20250915-hx852x-v5-1-b938182f1056@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Since commit 409fe0cea366 ("Input: goodix - add support for polling mode")
the interrupts property is optional, since at least the Linux kernel driver
supports also polling mode.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250904195727.168152-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert max11801-ts to yaml format.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250904200641.531897-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert sx8654.txt to yaml format.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250904191731.528145-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
eeti,exc3000.yaml
Remove legacy binding egalax-ts.txt file. And add compatible string
eeti,egalax_ts and wakeup-gpios to eeti,exc3000.yaml. "eeti,egalax_ts" is
general compatible string, which is not preferred. But it is compatible
with old devices (older than 10 years) and existing driver in
drivers/input/touchscreen/egalax_ts.c.
Allow address 0x4 for eeti,egalax_ts.
Don't require touchscreen-size-x(y) for eeti,egalax_ts.
Keep the same restriction for existing compatible string.
Fix below DTB_CHECKS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dtb: /soc/bus@2100000/i2c@21a8000/egalax_ts@4: failed to match any schema with compatible: ['eeti,egalax_ts']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250904171543.517650-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The binding currently expects exactly 5 keycodes, which matches the
chip's theoretical maximum but probably not the number of touch keys on
any phone using the IST3032C. Add a minItems value of 2 to prevent
dt-validate complaints.
Also add another example to make sure the linux,keycodes property is
checked.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250824-imagis-minitems-v1-1-cea9db55e87f@dujemihanovic.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The 'wakeup-source' property is used by many devicetree files and is
also supported by the tsc2007_core driver.
Document it to avoid the following dt-schema warning:
'wakeup-source' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250822213245.125901-1-festevam@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use comma between vendor-prefix and chip name as it is common.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 45601c66b5dd ("dt-bindings: input: touchscreen: convert tsc2007.txt to yaml format")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250830085326.36120-1-akemnade@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The touch-overlay feature adds support for segments (touch areas) on the
touchscreen surface that represent overlays with clipped touchscreen
areas and printed buttons.
Add nodes for a clipped touchscreen and overlay buttons to the existing
example.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-3-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The touch-overlay encompasses a number of touch areas that define a
clipped touchscreen area and/or buttons with a specific functionality.
A clipped touchscreen area avoids getting events from regions that are
physically hidden by overlay frames.
For touchscreens with printed overlay buttons, sub-nodes with a suitable
key code can be defined to report key events instead of the original
touch events.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-1-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Document FocalTech FT8716 support by adding the compatible.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250313202017.19621-2-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|