| Age | Commit message (Collapse) | Author |
|---|
|
Document the LVDS encoder IP found on the RZ/G3L SoC. It supports
single-link mode. LVDS and the DSI interface share a peripheral clock and
the MIPI_DSI_PRESET_N reset signal. However, the LVDS module cannot be
used at the same time as MIPI-DSI.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729125516.230757-10-biju.das.jz@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
|
|
The RZ/G3L DSI IP is similar to the RZ/G2L but has different global PHY
timings and also the PLLCLK is ungateble clock. Add the compatible
string "renesas,r9a08g046-mipi-dsi" to handle these difference for the
Renesas RZ/G3L SoC. The power to DSI region is controlled by SYSC block.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729125516.230757-2-biju.das.jz@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for handling multiple cells in "iommu-map" entries
- Support only 1 entry in /reserved-memory "reg" entries. Support for
more than 1 entry has been broken
- Fix a UAF on alloc_reserved_mem_array() failure
- Make "ibm,phandle" handling logic specific to PPC
- Use memcpy() instead of strcpy() for known length strings
- Ensure __of_find_n_match_cpu_property() handles malformed "reg"
entries
- Add various checks that expected strings are strings before
accessing them
- Drop redundant memset() when unflattening DT
DT bindings:
- Add a DTS style checker. Currently hooked up to dt_binding_check to
check examples
- Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
bindings to DT schema
- Add Apple System Management Controller hwmon, Qualcomm Hamoa
Embedded Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323,
Samsung SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder,
Samsung S2M series PMIC extcon, and MT6365 PMIC AuxADC schemas
- Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
- Consolidate "sram" property definitions
- Fix constraints on "nvmem" properties which only contain phandles
and no arg cells
- Another pass of fixing "phandle-array" constraints
- Add Gira vendor prefix"
* tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
dt-bindings: interrupt-controller: qcom,pdc: Add Maili compatible string
dt-bindings: interrupt-controller: ti,irq-crossbar: Convert to DT schema
dt-bindings: vendor-prefixes: add Gira
dt-bindings: embedded-controller: Add Qualcomm reference device EC description
dt-bindings: pwm: add IPQ6018 binding
dt-bindings: hwmon: Add Apple System Management Controller hwmon schema
docs: dt: writing-schema: Clarify what is required in a schema
of: Respect #{iommu,msi}-cells in maps
of: Factor arguments passed to of_map_id() into a struct
of: Add convenience wrappers for of_map_id()
of: reserved_mem: zero total_reserved_mem_cnt if no valid /reserved-memory entry
of: reserved_mem: handle NULL name in of_reserved_mem_lookup()
dt-bindings: cache: l2c2x0: Add missing power-domains
dt-bindings: interrupt-controller: renesas,r9a09g077-icu: Fix reg size in example
dt-bindings: nvmem: consumer: Make 'nvmem' an array of one-item entries
drivers/of/overlay: Use memcpy() to copy known length strings
dt-bindings: add self-test fixtures for style checker
dt-bindings: wire style checker into dt_binding_check
scripts/jobserver-exec: propagate child exit status
dt-bindings: add DTS style checker
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are fewer devicetree updates this time that the last few ones,
with five SoC types getting added:
- Qualcomm Dragonwing IPQ9650 is a new wireless networking SoC using
four Cortex-A55 and one Cortex-A78 core, which is a significant
upgrade from older generations
- ZTE zx297520v3 is an older low-end wireless SoC using a single
Cortex-A53 core, which so far can only run 32-bit kernels. This
brings back the ZX family of chips that was removed in 2021 after
support for the original zx296702 and zx296718 chips was never
completed.
- Renesas R-Car M3Le (R8A779MD) is a variant of the R-Car M3-N
(R8A77965) automotive SoC.
- Apple t8122 (M3) is the 2023 generation of their laptop SoCs, which
has now been reverse-engineered to the point of having initial
kernel support for five laptop models.
- ASPEED AST27xx is their first baseboard managment controller using
a 64-bit core, the Cortex-A35, following earlier generations using
ARMv5/v6/v7 CPUs.
These all come with one or more initial boards, and in total there are
39 new boards getting added across SoC families, including:
- Two NAS boxes using the old Cortina Systems Gemini SoC based on an
ARMv4 FA526 CPU core
- 18 industrial embedded boards using NXP i.MX6/8/9 and LX2160A SoCs
from Variscite, Toradex and SolidRun, plus a number of overlays for
combinations with additional boards
- One new carrier board and SoM using TI K3 AM62x, in addition to new
overlays for older SoMs
- Two new boards using Spacemit K3 (no relation with TI) RISC-V SoCs.
- Three phones from Google, Nothing and Motorola, all using Qualcomm
Snapdragon SoCs
- AST26xx BMC support for two server boards
While there is still a significant number of patches improving
hardware support for the existing boards across vendors (NXP,
Qualcomm, Renesas, Rockchips, Mediatek, ...), a much smaller number
of cleanups and warning fixes have made it in this time"
* tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (665 commits)
arm64: dts: aspeed: Fix duplicate pinctrl labels and address scheme
arm64: dts: bst: enable eMMC controller in C1200
dt-bindings: display/lvds-codec: add ti,sn65lvds93
arm64: dts: allwinner: a523: Add missing GPIO interrupt
arm64: dts: lx2160a-rev2: avoid 32-bit pcie window system ram overlap
arm64: dts: aspeed: Add initial AST27xx SoC device tree
arm64: Kconfig: Add ASPEED SoC family Kconfig support
dt-bindings: arm: aspeed: Add AST2700 board compatible
arm64: dts: allwinner: a523: add gpadc node
arm64: dts: allwinner: Add EL2 virtual timer interrupt
ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
dt-bindings: media: sun6i-a31-isp: Add optional interconnect properties
dt-bindings: media: sun6i-a31-csi: Add optional interconnect properties
arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlays
arm64: dts: imx93-var-som-symphony: enable ADC
arm64: dts: imx93-var-som-symphony: enable TPM3 PWM
arm64: dts: imx93-var-som-symphony: keep RGB_SEL low
arm64: dts: imx93-var-som-symphony: enable UART7
arm64: dts: imx93-var-som-symphony: add TPM support
arm64: dts: imx91-var-som-symphony: fix RGB_SEL handling
...
|
|
Add compatible string for TI SN65LVDS93. Similar to
SN65LVDS83 but with an industrial temperature range.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The Lontium LT9211 is capable of 1..4 DSI lanes per input DSI port,
describe the lane count for each input port in the schema.
For example Linux kernel driver does already use that information and
fails to probe if it is missing.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407203109.34302-1-marex@nabladev.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
SSD2825 being RGB-DSI bridge should inherit dsi-controller properties same
way other DSI controllers and DSI bridges do.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260417064657.20293-2-clamor95@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Getting fixes and updates from v7.1-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
A simple bridge used in ASUS Transformer AiO P1801-T.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260417064953.20511-3-clamor95@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
LVDS transmitter used in the Microsoft Surface RT.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260417064953.20511-2-clamor95@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Several the Waveshare DSI LCD panel kits use DSI2LVDS ICN6202 bridge
together with the LVDS panels. Define new compatible for the on-kit
bridge setup (it is not itmized and it uses Waveshare prefix since the
rest of the integration details are not known).
Note: the ICN6202 / ICN6211 bridges are completely handled by the board
itself, they should not be programmed by the host (which otherwise might
override correct params), etc. As such, it doesn't make sense to use
those in the compat strings. I consider those to be an internal detail
of the setup.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260412-ws-lcd-v3-1-db22c2631828@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Cleanup of the reserved memory code to keep CMA specifics in CMA
code
- Add and convert several users to new of_machine_get_match() helper
- Validate nul termination in string properties
- Update dtc to upstream v1.7.2-69-g53373d135579
- Limit matching reserved memory devices to /reserved-memory nodes
- Fix some UAF in unittests
- Remove Baikal SoC bus driver
- Fix false DT_SPLIT_BINDING_PATCH checkpatch warning
- Allow fw_devlink device-tree on x86
- Fix kerneldoc return description for of_property_count_elems_of_size()
DT bindings:
- Add fsl,imx25-aips, fsl,imx25-tcq, qcom,eliza-pdc,
qcom,eliza-spmi-pmic-arb, qcom,hawi-imem, qcom,milos-imem,
qcom,hawi-pdc, and lg,sw49410 bindings
- Convert arm,vexpress-scc to DT schema
- Deprecate Qualcomm generic CPU compatibles. Add Apple M3 CPU cores.
- Move some dual-link display panels to the dual-link schema
- Drop mux controller node name constraints
- Remove Baikal SoC bus bindings
- Fix a false warning in the thermal trip node binding"
* tag 'devicetree-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: display: panel: panel-simple: Add lg,sw49410 compatible
dt-bindings: display: ti, am65x-dss: Fix AM62L DSS reg and clock constraints
dt-bindings: display: simple: Move Innolux G156HCE-L01 panel to dual-link
dt-bindings: display: simple: Move AUO 21.5" FHD to dual-link
dt-bindings: thermal: Fix false warning with 'phandle' in trips nodes
of: unittest: fix use-after-free in testdrv_probe()
of: unittest: fix use-after-free in of_unittest_changeset()
dt-bindings: qcom,pdc: document the Hawi Power Domain Controller
dt-bindings: ARM: arm,vexpress-scc: convert to DT schema
drivers/of: fdt: validate flat DT string properties before string use
drivers/of: fdt: validate stdout-path properties before parsing them
dt-bindings: sram: Document qcom,hawi-imem compatible
dt-bindings: sram: Allow multiple-word prefixes to sram subnode
dt-bindings: sram: Document qcom,milos-imem
scripts/dtc: Update to upstream version v1.7.2-69-g53373d135579
of: property: Allow fw_devlink device-tree on x86
dt-bindings: arm: cpus: Add Apple M3 CPU core compatibles
dt-bindings: display: lt8912b: Drop redundant endpoint properties
dt-bindings: opp-v2: Fix example 3 CPU reg value
dt-bindings: connector: add pd-disable dependency
...
|
|
The "endpoint" node references video-interfaces.yaml schema with
"unevaluatedProperties: false" which means that all properties from
referenced schema apply. Listing some of them with ": true" is simply
redundant and does not make this code easier to read.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260316134606.57070-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add compatible strings for the Doestek DTC34LM85AM Flat Panel Display
Transmitter
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260223134941.427-4-bavishimithil@gmail.com
|
|
Add bindings for lt8713sx.
Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: Simon Zhu <xmzhu@lontium.corp-partner.google.com>
Link: https://patch.msgid.link/20260303-lt8713sx-bridge-driver-v5-1-6cc2a855aafa@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Describe 1..4 DSI lanes as supported. Internally, this bridge is
an ChipOne ICN6211 which loads its register configuration from a
dedicated storage and its I2C does not seem to be accessible. The
ICN6211 supports up to 4 DSI lanes, so this is a hard limit for
this bridge. The lane configuration is preconfigured in the bridge
for each of the WaveShare panels.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260115024004.660986-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Let's merge 7.0-rc1 to start the new drm-misc-next window
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The LT9611 has two DSI input ports (Port A and Port B). Update the
binding to clearly document the port mapping and allow using Port B
alone when DSI is physically connected to Port B only.
Changes:
- Clarify port@0 corresponds to DSI Port A input
- Clarify port@1 corresponds to DSI Port B input
- Change port requirement from mandatory port@0 to anyOf port@0/port@1,
allowing either port to be used independently
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Hongyang Zhao <hongyang.zhao@thundersoft.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Roger Shimizu <rosh@debian.org>
Tested-by: Roger Shimizu <rosh@debian.org>
Link: https://patch.msgid.link/20260207-rubikpi-next-20260116-v3-1-23b9aa189a3a@thundersoft.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
|
Drop the gpio reset from the list of required properties. The bridge works
fine with a reset not managed by Linux. In the driver itself the gpio is
already flagged as optional.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://patch.msgid.link/20260130205820.83189-6-d.haller@phytec.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
ANX7625 can be used to mux converted video stream with the USB signals
on a Type-C connector. Describe the optional connector subnode, make it
exclusive with the AUX bus and port@1 as it is impossible to have both
eDP panel and USB-C connector.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260121-anx7625-typec-v2-1-d14f31256a17@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
T-Head TH1520 SoC contains a Synopsys DesignWare HDMI controller paired
with DesignWare HDMI PHY, with an extra clock gate for HDMI pixel clock
and two reset controls.
Add a device tree binding to it.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260129023922.1527729-5-zhengxingda@iscas.ac.cn
|
|
Add compatible string for OnSemi FIN3385, a FlatLink LVDS transmitter.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260121085347.10368-2-marex@nabladev.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Some TDA998x variants (e.g. TDA19988) have an OSC_IN pin, to connect
an external oscillator circuit or clock source.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/2b66577296583a6787f770f0eb13c42a6b50768b.1768233569.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Current binding document enforces presence of either port@0 (DSI in) or
port@1 (DPI IN/OUT), with port@2 (DP out) being optional. This bridge is
capable of DSI->DP, DPI->DP and DPI->DP, it is therefore perfectly valid
to have both port@0 and port@1 described in the DT, because this is fairy
standard DPI->DP configuration of this bridge. Replace oneOf with anyOf
to cover this configuration.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260107213546.505137-1-marex@nabladev.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Make "reg" property mandatory for all LDB devices and "reg-names"
mandatory for i.MX8MP and i.MX93 which have two "reg" values. The
i.MX6SX has only one "reg" value so the "reg-names" property there
is optional and not needed.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260106012236.295834-1-marek.vasut@mailbox.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Document the optional nxp,enable-termination-resistor property for the
i.MX LVDS display bridge.
This boolean property indicates that the built-in 100 Ohm termination
resistor on the LVDS output is enabled. It is controlled via the HS_EN
bit in the LVDS_CTRL register. Enabling the resistor can improve LVDS
signal quality and may prevent visual artifacts on some boards, but
increases the power consumption.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20260120231930.2782444-1-festevam@gmail.com
|
|
DP-to-HDMI bridge
The Algoltek AG6311 is a transparent DisplayPort to HDMI bridge.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260120234029.419825-7-val@packett.cool
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add the compatible string "renesas,r9a09g057-mipi-dsi" for the Renesas
RZ/V2H(P) (R9A09G057) SoC. While the MIPI DSI LINK registers are shared
with the RZ/G2L SoC, the D-PHY register layout differs. Additionally, the
RZ/V2H(P) uses only two resets compared to three on RZ/G2L, and requires
five clocks instead of six.
To reflect these hardware differences, update the binding schema to
support the reduced clock and reset requirements for RZ/V2H(P).
Since the RZ/V2N (R9A09G056) SoC integrates an identical DSI IP to
RZ/V2H(P), the same "renesas,r9a09g057-mipi-dsi" compatible string is
reused for RZ/V2N.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251015192611.241920-6-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
|
|
The ASL CS5263 is a high-performance DP1.4 to HDMI2.0b converter,
designed to connect a DP1.4 source to an HDMI2.0b sink. The CS5263AN
integrates a DP1.4 compliant receiver, and a HDMI2.0b compliant
transmitter.
Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251121142623.251118-3-ggo@tuxedocomputers.com
|
|
Add a new ite,it66122 compatible string to the IT66121 binding
documentation, since the two chips are practically same except for id
register difference.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029150636.3118628-2-nm@ti.com
|
|
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Update Krzysztof Kozlowski's email address to kernel.org account to stay
reachable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251021095354.86455-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
DP-to-HDMI bridge
The Parade PS185HDM is a transparent Displayport to HDMI bridge.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://patch.msgid.link/20251116-asus_usbc_dp-v2-1-cc8f51136c9f@hotmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
ili9881c binding
Update the panel example in this DT schema to match requirements in binding
display/panel/ilitek,ili9881c.yaml . This fixes the following schema check
warnings:
"
/tmp/dtx/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb: panel@0 (raspberrypi,dsi-7inch): compatible: ['raspberrypi,dsi-7inch'] is too short
from schema $id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml
/tmp/dtx/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb: panel@0 (raspberrypi,dsi-7inch): 'power-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml
"
Fixes: c376a6943741 ("dt-bindings: display: bridge: renesas,dsi-csi2-tx: Allow panel@ subnode")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029200519.214548-1-marek.vasut+renesas@mailbox.org
|
|
This controller can have both bridges and panels connected to it. In
order to describe panels properly in DT, pull in dsi-controller.yaml
and disallow only unevaluatedProperties, because the panel node is
optional. Include example binding with panel.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250904210147.186728-4-marek.vasut+renesas@mailbox.org
|
|
Updating drm-misc-next to the state of v6.18-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
Add binding for the i.MX8MP HDMI parallel Audio interface block.
The HDMI TX Parallel Audio Interface (HTX_PAI) is a digital module that
acts as the bridge between the Audio Subsystem to the HDMI TX Controller.
This IP block is found in the HDMI subsystem of the i.MX8MP SoC.
Aud2htx module in Audio Subsystem, HDMI PAI module and HDMI TX
Controller compose the HDMI audio pipeline.
In fsl,imx8mp-hdmi-tx.yaml, add port@2 that is linked to pai_to_hdmi_tx.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-2-shengjiu.wang@nxp.com
|
|
yaml
Convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml format.
Additional changes:
- Only keep one example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add compatible string for Exynos7870 DSIM bridge controller. The
device requires four clock sources, in schema they're named as "bus",
"pll", "byte", and "esc".
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
DP-to-HDMI bridge
The Realtek RTD2171 chipset is a transparent DisplayPort 1.4 to
HDMI 2.0 bridge.
This chipset is usually found in USB-C To HDMI Adapters and Docks,
or laptops to provide HDMI display output.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250908-topic-x1e80100-hdmi-v3-1-c53b0f2bc2fb@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Several display bridges (e.g. LVDS to HDMI converters) are used as sound
Digital Audio Interface (DAI) and have '#sound-dai-cells', thus they
should reference dai-common.yaml schema to allow common properties, like
DAI name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250904083816.48076-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Device can be used over I2C bus, so it documents 'reg' property, however
it misses to constrain it to actual I2C address.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250820-dt-bindings-display-v2-2-91e2ccba3d4e@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The binding references synopsys,dw-hdmi.yaml schema which defines both
'clocks' and 'clock-names' with variable length, therefore we need here
also same constraint for 'clock-names' as for 'clocks'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250820-dt-bindings-display-v2-1-91e2ccba3d4e@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
RA620 is a DP to HDMI bridge converter from RADXA, which first
found be used on ROCK 5 ITX.
This chip can be used without involving software.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250822063959.692098-6-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Updating drm-misc-next to the state of v6.17-rc1. Begins a new release
cycle.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Add dt-binding documentation for waveshare DSI2DPI unit
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Suggested-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250806-waveshare-v3-1-fd28e01f064f@nxp.com
|
|
Add bindings for Solomon SSD2825 MIPI master bridge chip that connects an
application processor with traditional parallel LCD interface and an LCD
driver with MIPI slave interface. The SSD2825 supports both parallel RGB
interface and serial SPI interface.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250730055424.6718-2-clamor95@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
