diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/gpio/regmap.h | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h index e939709fde8d..eb3931fbbad0 100644 --- a/include/linux/gpio/regmap.h +++ b/include/linux/gpio/regmap.h @@ -34,10 +34,6 @@ struct regmap; * @ngpio_per_reg: (Optional) Number of GPIOs per register * @irq_domain: (Optional) IRQ domain if the controller is * interrupt-capable - * @reg_mask_xlate: (Optional) Translates base address and GPIO - * offset to a register/bitmask pair. If not - * given the default gpio_regmap_simple_xlate() - * is used. * @fixed_direction_mask: * (Optional) Bitmap representing the GPIO lines that * make use of the @fixed_direction_output list to @@ -48,16 +44,20 @@ struct regmap; * (Optional) Bitmap representing the fixed direction of * the GPIO lines. Useful when there are GPIO lines with a * fixed direction mixed together in the same register. - * @drvdata: (Optional) Pointer to driver specific data which is - * not used by gpio-remap but is provided "as is" to the - * driver callback(s). - * @init_valid_mask: (Optional) Routine to initialize @valid_mask, to be used - * if not all GPIOs are valid. * @regmap_irq_chip: (Optional) Pointer on an regmap_irq_chip structure. If * set, a regmap-irq device will be created and the IRQ * domain will be set accordingly. * @regmap_irq_line: (Optional) The IRQ the device uses to signal interrupts. * @regmap_irq_flags: (Optional) The IRQF_ flags to use for the interrupt. + * @reg_mask_xlate: (Optional) Translates base address and GPIO + * offset to a register/bitmask pair. If not + * given the default gpio_regmap_simple_xlate() + * is used. + * @init_valid_mask: (Optional) Routine to initialize @valid_mask, to be used + * if not all GPIOs are valid. + * @drvdata: (Optional) Pointer to driver specific data which is + * not used by gpio-remap but is provided "as is" to the + * driver callback(s). * * The ->reg_mask_xlate translates a given base address and GPIO offset to * register and mask pair. The base address is one of the given register |