diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/hwmon/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/hwmon/tvs-mpfs.rst | 53 |
2 files changed, 54 insertions, 0 deletions
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 74d67fa21d19..226789376217 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -273,6 +273,7 @@ Hardware Monitoring Kernel Drivers tps53679 tps546d24 tsc1641 + tvs-mpfs twl4030-madc-hwmon ucd9000 ucd9200 diff --git a/Documentation/hwmon/tvs-mpfs.rst b/Documentation/hwmon/tvs-mpfs.rst new file mode 100644 index 000000000000..1035812f363a --- /dev/null +++ b/Documentation/hwmon/tvs-mpfs.rst @@ -0,0 +1,53 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver tvs-mpfs +====================== + +Supported chips: + + * PolarFire SoC + +Authors: + + - Conor Dooley <conor.dooley@microchip.com> + - Lars Randers <lranders@mail.dk> + +Description +----------- + +This driver implements support for the temperature and voltage sensors on +PolarFire SoC. The temperature reports how hot the die is, and the voltages are +the SoC's 1.05, 1.8 and 2.5 volt rails respectively. + + +Usage Notes +----------- + +update_interval has a permitted range of 0 to 8 milliseconds. + +Temperatures are read in millidegrees Celsius, but the hardware measures in +degrees Kelvin, storing the result as 11.4 fixed point data, for a maximum +value of 2047.9375 degrees Kelvin. + +Voltages are read in millivolts. The hardware measures in millivolts, storing +the value as 12.3 fixed point data, for a maximum of 4095.875 millivolts. +The minimum value reportable by the driver is 0 volts, although the hardware +is capable of measuring negative values. + +Sysfs entries +------------- + +The following attributes are supported. update_interval is read-write, as are +the enables. All other attributes are read only. + +======================= ==================================================== +temp1_label Fixed name for channel. +temp1_input Measured temperature for channel. +temp1_enable Enable/disable for channel. + +in[0-2]_label Fixed name for channel. +in[0-2]_input Measured voltage for channel. +in[0-2]_enable Enable/disable for channel. + +update_interval The interval at which the chip will update readings. +======================= ==================================================== |