1 files changed, 0 insertions, 127 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
deleted file mode 100644
index 28fbca180068..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-Pincontrol driver for MAX77620 Power management IC from Maxim Semiconductor.
-
-Device has 8 GPIO pins which can be configured as GPIO as well as the
-special IO functions.
-
-Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
-for details of the common pinctrl bindings used by client devices,
-including the meaning of the phrase "pin configuration node".
-
-Optional Pinmux properties:
---------------------------
-Following properties are required if default setting of pins are required
-at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
-- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
-		<pinctrl-bindings.txt>.
-
-The pin configurations are defined as child of the pinctrl states node. Each
-sub-node have following properties:
-
-Required properties:
-------------------
-- pins: List of pins. Valid values of pins properties are:
-		      gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7.
-
-Optional properties:
--------------------
-Following are optional properties defined as pinmux DT binding document
-<pinctrl-bindings.txt>. Absence of properties will leave the configuration
-on default.
-	function,
-	drive-push-pull,
-	drive-open-drain,
-	bias-pull-up,
-	bias-pull-down.
-
-Valid values for function properties are:
-	gpio, lpm-control-in, fps-out, 32k-out, sd0-dvs-in, sd1-dvs-in,
-	reference-out
-
-There are also customised properties for the GPIO1, GPIO2 and GPIO3. These
-customised properties are required to configure FPS configuration parameters
-of these GPIOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more
-detail of Flexible Power Sequence (FPS).
-
-- maxim,active-fps-source:		FPS source for the GPIOs to get
-					enabled/disabled when system is in
-					active state.  Valid values are:
-					- MAX77620_FPS_SRC_0,
-						FPS source is FPS0.
-					- MAX77620_FPS_SRC_1,
-						FPS source is FPS1
-					- MAX77620_FPS_SRC_2 and
-						FPS source is FPS2
-					- MAX77620_FPS_SRC_NONE.
-						GPIO is not controlled
-						by FPS events and it gets
-						enabled/disabled by register
-						access.
-					Absence of this property will leave
-					the FPS configuration register for that
-					GPIO to default configuration.
-
-- maxim,active-fps-power-up-slot:	Sequencing event slot number on which
-					the GPIO get enabled when
-					master FPS input event set to HIGH.
-					Valid values are 0 to 7.
-					This is applicable if FPS source is
-					selected as FPS0, FPS1 or FPS2.
-
-- maxim,active-fps-power-down-slot:	Sequencing event slot number on which
-					the GPIO get disabled when master
-					FPS input event set to LOW.
-					Valid values are 0 to 7.
-					This is applicable if FPS source is
-					selected as FPS0, FPS1 or FPS2.
-
-- maxim,suspend-fps-source:		This is same as property
-					"maxim,active-fps-source" but value
-					get configured when system enters in
-					to suspend state.
-
-- maxim,suspend-fps-power-up-slot:	This is same as property
-					"maxim,active-fps-power-up-slot" but
-					this value get configured into FPS
-					configuration register when system
-					enters into suspend.
-					This is applicable if suspend state
-					FPS source is selected as FPS0, FPS1 or
-
-- maxim,suspend-fps-power-down-slot:	This is same as property
-					"maxim,active-fps-power-down-slot" but
-					this value get configured into FPS
-					configuration register when system
-					enters into suspend.
-					This is applicable if suspend state
-					FPS source is selected as FPS0, FPS1 or
-					FPS2.
-
-Example:
---------
-#include <dt-bindings/mfd/max77620.h>
-...
-max77620@3c {
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&spmic_default>;
-
-	spmic_default: pinmux@0 {
-		pin_gpio0 {
-			pins = "gpio0";
-			function = "gpio";
-		};
-
-		pin_gpio1 {
-			pins = "gpio1";
-			function = "fps-out";
-			maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
-		};
-
-		pin_gpio2 {
-			pins = "gpio2";
-			function = "fps-out";
-			maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
-		};
-	};
-};