scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers

The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE
(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not
zero the allocation. They initialize only a few leading bytes before
handing the buffer to qla2x00_write_sfp().

qla2x00_write_sfp() can override the transfer length with a user-supplied
value:

	if (len == 1)
		opt |= BIT_0;
	if (opt & BIT_0)
		len = *sfp;

*sfp is the first byte of the (user-controlled) payload, so len can grow
up to 255. The device then DMA-reads len bytes from the 256-byte pool
buffer. Since only a small prefix was written
(e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU
status register), the hardware reads past the initialized region and
writes up to ~219 bytes of stale DMA-pool heap memory to the device
flash.

Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers
so any bytes beyond the initialized data are zero rather than stale heap
contents.

Fixes: 697a4bc69159 ("[SCSI] qla2xxx: Provide method for updating I2C attached VPD.")
Fixes: 9ebb5d9c69f1 ("[SCSI] qla2xxx: Add I2C BSG interface.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-32-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>

0 files changed, 0 insertions, 0 deletions