Merge branch 'add-dapu-telecom-dap8211r-i-gigabit-ethernet-phy-driver'

Artem Shimko says:

====================
Add DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY driver

This series adds support for the DAPU Telecom DAP8211R(I) Gigabit
Ethernet PHY, commonly used in enterprise and industrial networking
applications. The PHY supports 10/100/1000 Mbps operation with RGMII
interface and includes features such as IEEE 802.3az Energy Efficient
Ethernet, IEEE 1588 SyncE.

The driver implements extended register access via indirect addressing
(registers 0x1E/0x1F) and provides comprehensive device tree support
for RGMII delay configuration. The rx-internal-delay-ps and
tx-internal-delay-ps properties allow precise tuning of clock delays
in 150 ps steps from 0 to 2250 ps.

This PHY is used on the NDA platform with 1G Ethernet tile and has
been tested on that hardware with successful link establishment and
RGMII delay tuning.

$ make dt_binding_check DT_SCHEMA_FILES=dptel,dap8211r.yaml
  SCHEMA  Documentation/devicetree/bindings/processed-schema.json
  CHKDT   ./Documentation/devicetree/bindings
  LINT    ./Documentation/devicetree/bindings
  STYLE   ./Documentation/devicetree/bindings
  DTEX    Documentation/devicetree/bindings/net/dptel,dap8211r.example.dts
  DTC [C] Documentation/devicetree/bindings/net/dptel,dap8211r.example.dtb
$ yamllint Documentation/devicetree/bindings/net/dptel,dap8211r.yaml
$ grep -i "dap8211r" Documentation/devicetree/bindings/processed-schema.json
    "http://devicetree.org/schemas/net/dptel,dap8211r.yaml": {
        "$filename": "/home/a-shimko/patchwork/linux/Documentation/devicetree/bindings/net/dptel,dap8211r.yaml",
        "$id": "http://devicetree.org/schemas/net/dptel,dap8211r.yaml#",
        "title": "DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY",

Working with xgmac.

Board side:

$ arping -I eth0 192.168.5.100
ARPING 192.168.5.1 from 192.168.5.100 eth0
Unicast reply from 192.168.5.1 [board.mac.addr]  8.543ms
Unicast reply from 192.168.5.1 [board.mac.addr]  3.295ms
Unicast reply from 192.168.5.1 [board.mac.addr]  4.301ms
Unicast reply from 192.168.5.1 [board.mac.addr]  4.096ms
Unicast reply from 192.168.5.1 [board.mac.addr]  2.872ms
...

Unfortunately, there is a dependence on the axibus speed here
$ iperf3 -c 192.168.5.1
Connecting to host 192.168.5.1, port 5201
[  5] local 192.168.5.100 port 58936 connected to 192.168.5.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  7.88 MBytes  65.8 Mbits/sec    0    150 KBytes
[  5]   1.00-2.00   sec  8.50 MBytes  71.4 Mbits/sec    0    165 KBytes
[  5]   2.00-3.00   sec  8.25 MBytes  69.2 Mbits/sec    0    165 KBytes
[  5]   3.00-4.01   sec  8.50 MBytes  71.1 Mbits/sec    0    165 KBytes
[  5]   4.01-5.00   sec  8.38 MBytes  70.3 Mbits/sec    0    165 KBytes
[  5]   5.00-6.00   sec  8.50 MBytes  71.5 Mbits/sec    0    165 KBytes
[  5]   6.00-7.01   sec  8.62 MBytes  72.0 Mbits/sec    0    174 KBytes
[  5]   7.01-8.00   sec  8.62 MBytes  72.8 Mbits/sec    0    174 KBytes
[  5]   8.00-9.00   sec  8.62 MBytes  72.2 Mbits/sec    0    174 KBytes
[  5]   9.00-10.04  sec  8.62 MBytes  69.9 Mbits/sec    0    174 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.04  sec  84.6 MBytes  70.7 Mbits/sec    0 sender
[  5]   0.00-10.12  sec  84.8 MBytes  70.3 Mbits/sec receiveriperf Done.

$ ethtool -t eth0
...
The test extra info:
 1. MAC Loopback                 0
 2. MAC Loopback (diff. queues)  0
 3. PHY Loopback                 0
...

ELP side:
...
17:29:11.974973 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28
17:29:12.975199 ARP, Request who-has ELP tell 192.168.5.100, length 46
17:29:12.975217 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28
17:29:13.975022 ARP, Request who-has ELP tell 192.168.5.100, length 46
17:29:13.975035 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28
17:29:14.974837 ARP, Request who-has ELP tell 192.168.5.100, length 46
17:29:14.974849 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28
17:29:15.975026 ARP, Request who-has ELP tell 192.168.5.100, length 46
...

Accepted connection from 192.168.5.100, port 58932
[  5] local 192.168.5.1 port 5201 connected to 192.168.5.100 port 58936
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  7.12 MBytes  59.7 Mbits/sec
[  5]   1.00-2.00   sec  8.50 MBytes  71.3 Mbits/sec
[  5]   2.00-3.00   sec  8.50 MBytes  71.3 Mbits/sec
[  5]   3.00-4.00   sec  8.38 MBytes  70.3 Mbits/sec
[  5]   4.00-5.00   sec  8.50 MBytes  71.3 Mbits/sec
[  5]   5.00-6.00   sec  8.38 MBytes  70.3 Mbits/sec
[  5]   6.00-7.00   sec  8.62 MBytes  72.4 Mbits/sec
[  5]   7.00-8.00   sec  8.62 MBytes  72.3 Mbits/sec
[  5]   8.00-9.00   sec  8.62 MBytes  72.4 Mbits/sec
[  5]   9.00-10.00  sec  8.62 MBytes  72.4 Mbits/sec
[  5]  10.00-10.12  sec   896 KBytes  62.3 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.12  sec  84.8 MBytes  70.3 Mbits/sec receiver

DTS node example:
&ethernet_1g_tile {
  ...
  phy-mode = "rgmii-rxid";
  phy-handle = <&phy1>;
  ...

  mdio: mdio {
    phy1: ethernet-phy@1 {
      ...
      compatible = "ethernet-phy-id0008.011b";
      rx-internal-delay-ps = <1950>;
      ...
    };
  };
};
====================

Link: https://patch.msgid.link/20260805085540.452260-1-a.shimko.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

0 files changed, 0 insertions, 0 deletions