net: stmmac: rk: convert to mask-based interface mode configuration

The majority of Rockchip implementations require three common pieces
of information to configure the PHY interface mode:

- The grf register offset for configuring the GMAC phy_intf_sel field
  and the RMII mode bit.
- The bitfield in this register for the GMAC's phy_intf_sel.
- The bit position for RMII mode but clear for RGMII mode.

Introduce members for this information into struct rk_priv_data and
struct rk_gmac_ops, which will be used to pre-initialise the struct
rk_priv_data members. We describe the register contents using
bitfields, even for those that are a single bit for consistency.

As each register comprises of two halves, where the upper half enables
changing the bit state in the lower half, we can describe these
bitfields using a 16-bit data type, and provide rk_encode_wm16() to
generate the actual register values from the field mask and field
value. We are unable to use the FIELD_PREP_WM16() macros for this as
these require the field mask to be a constant.

Add code to rk_gmac_powerup() to get the phy_intf_sel value, validating
that the resulting mode is either RMII or RGMII. No other modes are
supported by any of the Rockchip SoCs supported by this driver.

If either of the bitfield mask values are populated in struct
rk_priv_data, use these to generate the register contents, and write
the resulting value to the specified GRF register.

Convert many Rockchip implementations to use this new infrastructure.
For those where there is a single GMAC instance, it is merely a case of
filling in the new members of struct rk_gmac_ops. For those with
multiple instances, one or more of these members depends on the GMAC
instance, so setup of the members in struct rk_gmac has to be done via
the .init method of struct rk_gmac_ops. The corresponding code is
removed from the set_to_rgmii() and set_to_rmii() implementations.

Since the member name documents the purpose of the field that is being
initialised, providing preprocessor macros to define the bitfields is
deemed to be less than useful given the massive size of this driver.

The existing mechanisms remain behind for those SoCs that can not be
converted to this scheme.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
v2: disable clocks on failure
Link: https://patch.msgid.link/E1vmqmh-00000007VCJ-1xns@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

0 files changed, 0 insertions, 0 deletions