spi: Add trace events for Qualcomm GENI SPI drivers

Praveen Talari <praveen.talari@oss.qualcomm.com> says:

Add tracepoints to the Qualcomm GENI (Generic Interface) SPI driver.
These trace events enable runtime debugging and performance analysis
of SPI operations.

The trace events capture SPI clock configuration, setup parameters,
transfer details, interrupt status.

Usage examples:

Enable all SPI traces:
  echo 1 > /sys/kernel/tracing/events/spi/enable
  echo 1 > /sys/kernel/debug/tracing/events/qcom_geni_spi/enable
  cat /sys/kernel/debug/tracing/trace_pipe

Example trace output:

1003.956560: spi_message_submit: spi16.0 000000001b20b93c
1003.956642: spi_controller_busy: spi16
1003.956643: spi_message_start: spi16.0 000000001b20b93c
1003.956646: geni_spi_setup_params: 888000.spi: cs=0 mode=0x00000020
     mode_changed=0x00000007 cs_changed=0
1003.956647: spi_set_cs: spi16.0 activate
1003.956648: spi_transfer_start: spi16.0 00000000ea1cf8b6 len=16
     tx=[4c-80-e4-ca-68-4d-95-aa-ee-99-ae-d7-69-e9-5f-39]
rx=[00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00]
1003.956653: geni_spi_clk_cfg: 888000.spi: req_hz=20000000
     sclk_hz=100000000 clk_idx=5 clk_div=5 bpw=8
1003.956691: geni_spi_transfer: 888000.spi: len=16 m_cmd=0x00000003
1003.956708: geni_spi_irq: 888000.spi: m_irq=0x08000081
     dma_tx=0x00000000 dma_rx=0x00000000
1003.956717: spi_transfer_stop: spi16.0 00000000ea1cf8b6 len=16
     tx=[4c-80-e4-ca-68-4d-95-aa-ee-99-ae-d7-69-e9-5f-39]
rx=[4c-80-e4-ca-68-4d-95-aa-ee-99-ae-d7-69-e9-5f-39]
1003.956717: spi_set_cs: spi16.0 deactivate
1003.956718: spi_message_done: spi16.0 000000001b20b93c len=16/16

Link: https://patch.msgid.link/20260518-add-tracepoints-for-qcom-geni-spi-v3-0-7928f6810a79@oss.qualcomm.com

0 files changed, 0 insertions, 0 deletions