spi: rockchip: Read ISR, not IMR, to detect cs-inactive IRQ

rockchip_spi_isr() decides whether the current interrupt was the
cs-inactive event by reading IMR:

	if (rs->cs_inactive &&
	    readl_relaxed(rs->regs + ROCKCHIP_SPI_IMR) & INT_CS_INACTIVE)
		ctlr->target_abort(ctlr);

IMR is the interrupt mask register: it tells which sources are enabled,
not which one fired. In the PIO path, rockchip_spi_prepare_irq() enables
both INT_RF_FULL and INT_CS_INACTIVE in IMR when rs->cs_inactive is true:

	if (rs->cs_inactive)
		writel_relaxed(INT_RF_FULL | INT_CS_INACTIVE,
			       rs->regs + ROCKCHIP_SPI_IMR);

so the IMR check is always true once cs_inactive is enabled, and every
PIO interrupt - including normal RF_FULL completions - is dispatched to
ctlr->target_abort(), aborting the transfer. The bug is reachable on
ROCKCHIP_SPI_VER2_TYPE2 in target mode with a DMA-capable controller
when the transfer is short enough to fall back to PIO
(rockchip_spi_can_dma() returns false below fifo_len).

Read ISR (which is RISR masked by IMR) so the check actually reflects
which interrupt fired, and parenthesise the expression for clarity while
at it.

Fixes: 869f2c94db92 ("spi: rockchip: Stop spi slave dma receiver when cs inactive")
Signed-off-by: John Madieu <john.madieu@gmail.com>
Link: https://patch.msgid.link/20260425092936.2590132-2-john.madieu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

0 files changed, 0 insertions, 0 deletions