dt-bindings: iio: temperature: Add ADT7604 support to adi,ltc2983

The ADT7604 shares the same die as the LTC2984. It repurposes the
custom RTD sensor type (18) as a copper trace resistance sensor
and the custom thermistor type (27) as a leak detector, and
removes thermocouple, diode and direct ADC sensor types.

Add adi,adt7604 to the compatible list and introduce two new
sensor node types specific to this device:

- copper-trace@: maps to the custom RTD sensor type (18). Two
variants: sub-ohm (< 1 ohm, adi,copper-trace-sub-ohm boolean,
no custom table and excitation current) and standard (> 1 ohm,
required adi,custom-copper-trace table, optional excitation current
defaulting to the datasheet recommended value). Primary output
is resistance in ohms. For > 1 ohm copper traces with a custom table,
the chip also outputs temperature in millidegrees Celsius.

- leak-detector@: maps to the custom thermistor sensor type (27).
Takes a required adi,custom-leak-detector lookup table encoding
resistance (uOhm) against coverage data (%). Two outputs:
resistance in ohms and coverage in percent.

Separate node types are used rather than extending the existing
rtd@ and thermistor@ nodes because adi,custom-rtd is required
for sensor type 18, and several properties (adi,number-of-wires,
adi,rtd-curve, adi,rsense-share, adi,single-ended,
adi,current-rotate) have no meaning for the new sensor types, since
the configuration is hardcoded, and would need to be explicitly
forbidden or ignored in the driver.

allOf conditions are added to restrict thermocouple, diode, direct
ADC and active temperature nodes to non-ADT7604 devices, and to
restrict copper-trace and leak-detector nodes to the ADT7604
(some parts only).

Signed-off-by: Liviu Stan <liviu.stan@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

0 files changed, 0 insertions, 0 deletions