Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

5 files changed, 900 insertions, 47 deletions

diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h
index 81a05c9c0706..fdfc97a6e4ec 100644
--- a/include/uapi/linux/cec.h
+++ b/include/uapi/linux/cec.h
@@ -403,6 +403,8 @@ struct cec_log_addrs {
 #define CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU	(1 << 1)
 /* CDC-Only device: supports only CDC messages */
 #define CEC_LOG_ADDRS_FL_CDC_ONLY		(1 << 2)
+/* Configuration failed */
+#define CEC_LOG_ADDRS_FL_CONFIG_FAILED		(1 << 3)
 
 /**
  * struct cec_drm_connector_info - tells which drm connector is
diff --git a/include/uapi/linux/media/arm/mali-c55-config.h b/include/uapi/linux/media/arm/mali-c55-config.h
index 3d335f950eeb..ef0fe17df96e 100644
--- a/include/uapi/linux/media/arm/mali-c55-config.h
+++ b/include/uapi/linux/media/arm/mali-c55-config.h
@@ -36,6 +36,9 @@
  */
 #define MALI_C55_MAX_ZONES	(15 * 15)
 
+/* Number of RGB gamma LUT entries. */
+#define MALI_C55_NUM_GAMMA_LUT_ELEMENTS 129
+
 /**
  * struct mali_c55_ae_1024bin_hist - Auto Exposure 1024-bin histogram statistics
  *
@@ -219,6 +222,9 @@ struct mali_c55_stats_buffer {
  * @MALI_C55_PARAM_BLOCK_AWB_GAINS_AEXP: Auto-white balance gains for AEXP-0 tap
  * @MALI_C55_PARAM_MESH_SHADING_CONFIG : Mesh shading tables configuration
  * @MALI_C55_PARAM_MESH_SHADING_SELECTION: Mesh shading table selection
+ * @MALI_C55_PARAM_BLOCK_CCM: Colour correction matrix
+ * @MALI_C55_PARAM_BLOCK_GAMMA_FR: Gamma gain and offset for FR pipe
+ * @MALI_C55_PARAM_BLOCK_GAMMA_DS: Gamma gain and offset for DS pipe
  */
 enum mali_c55_param_block_type {
 	MALI_C55_PARAM_BLOCK_SENSOR_OFFS,
@@ -232,6 +238,9 @@ enum mali_c55_param_block_type {
 	MALI_C55_PARAM_BLOCK_AWB_GAINS_AEXP,
 	MALI_C55_PARAM_MESH_SHADING_CONFIG,
 	MALI_C55_PARAM_MESH_SHADING_SELECTION,
+	MALI_C55_PARAM_BLOCK_CCM,
+	MALI_C55_PARAM_BLOCK_GAMMA_FR,
+	MALI_C55_PARAM_BLOCK_GAMMA_DS,
 };
 
 /**
@@ -758,6 +767,78 @@ struct mali_c55_params_mesh_shading_selection {
 };
 
 /**
+ * struct mali_c55_params_ccm - Coefficients, offsets and gains for the colour
+ *				correction matrix
+ *
+ * The colour correction module converts images data from a sensor-specific
+ * colour space to known one.
+ *
+ * Colour correction is applied after demosaicing and each pixel is represented
+ * as a column vector of the three RGB colour channels on which the following
+ * operations take place:
+ * 1) An offset is subtracted from each colour channel
+ * 2) Each colour channel is multiplied by a gain
+ * 3) The pixel column vector is multiplied by the colour correction matrix
+ *
+ * This struct allows users to configure the coefficients for CCM and the
+ * per-channel offsets and gains. The nine matrix coefficients are expressed as
+ * 13 bits signed Q4.8 Sign/Magnitude fixed-point numbers, the three gain
+ * multipliers are expressed as 12 bits unsigned Q4.8 fixed-point numbers and
+ * the three offsets are expressed as a 12 bits unsigned integers.
+ *
+ * header.type should be set to MALI_C55_PARAM_BLOCK_CCM from
+ * :c:type:`mali_c55_param_block_type`.
+ *
+ * @header:	The Mali-C55 parameters block header
+ * @coeffs:	3x3 color conversion matrix coefficients in sign/magnitude
+ *		Q4.8 format
+ * @gains:	Gains for red, green and blue channels in unsigned Q4.8 format
+ * @offs:	Offsets for red, green and blue channels
+ */
+struct mali_c55_params_ccm {
+	struct v4l2_isp_params_block_header header;
+	__u16 coeffs[3][3];
+	__u16 gains[3];
+	__u16 offs[3];
+};
+
+/**
+ * struct mali_c55_params_gamma - RGB Gamma correction
+ *
+ * Gamma correction is used to program a standard gamma curve such as the sRGB
+ * one. It provides gains and offsets to implement contrast adjustments.
+ *
+ * Gamma correction is applied on both the FR and DS pipes separately in the RGB
+ * colour domain where the following operations take place:
+ * 1) An offset is subtracted from each colour channel
+ * 2) Each colour channel is multiplied by a gain
+ * 3) The Gamma LUT is applied to each colour channel
+ *
+ * The Gamma LUT has 129 entries where each node is an unsigned 12 bit number.
+ * It is expected that LUT[0]=0 and LUT[128]=0xfff, with the other 127 values
+ * defining the Gamma correction curve. The three gain multipliers are expressed
+ * as 12-bits unsigned Q4.8 fixed-point numbers and the three offsets are
+ * expressed as a 12-bits unsigned integers.
+ *
+ * As one Gamma correction block is available on both the FR and DS pipes, the
+ * header.type field should be set to one of either
+ * MALI_C55_PARAM_BLOCK_GAMMA_FR or MALI_C55_PARAM_BLOCK_GAMMA_DS from
+ * :c:type:`mali_c55_param_block_type`.
+ *
+ * @header:	The Mali-C55 parameters block header
+ * @gains:	Gains for the red, green and blue channel in unsigned Q4.8 format
+ * @offs:	Offsets subtracted from the red, green and blue channels
+ *		in unsigned 12 bits format
+ * @lut:	129-node Gamma LUT in unsigned 12 bits format
+ */
+struct mali_c55_params_gamma {
+	struct v4l2_isp_params_block_header header;
+	__u16 gains[3];
+	__u16 offs[3];
+	__u32 lut[MALI_C55_NUM_GAMMA_LUT_ELEMENTS];
+};
+
+/**
  * define MALI_C55_PARAMS_MAX_SIZE - Maximum size of all Mali C55 Parameters
  *
  * Though the parameters for the Mali-C55 are passed as optional blocks, the
@@ -780,6 +861,9 @@ struct mali_c55_params_mesh_shading_selection {
 	sizeof(struct mali_c55_params_awb_config) +		\
 	sizeof(struct mali_c55_params_awb_gains) +		\
 	sizeof(struct mali_c55_params_mesh_shading_config) +	\
-	sizeof(struct mali_c55_params_mesh_shading_selection))
+	sizeof(struct mali_c55_params_mesh_shading_selection) +	\
+	sizeof(struct mali_c55_params_ccm) +			\
+	sizeof(struct mali_c55_params_gamma) +			\
+	sizeof(struct mali_c55_params_gamma))
 
 #endif /* __UAPI_MALI_C55_CONFIG_H */
diff --git a/include/uapi/linux/media/dreamchip/rppx1-config.h b/include/uapi/linux/media/dreamchip/rppx1-config.h
new file mode 100644
index 000000000000..3507a9ab03df
--- /dev/null
+++ b/include/uapi/linux/media/dreamchip/rppx1-config.h
@@ -0,0 +1,730 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Dreamchip RPP-X1 ISP Driver - Userspace API
+ *
+ * Copyright (C) 2026 Renesas Electronics Corp.
+ * Copyright (C) 2026 Ideas on Board Oy
+ * Copyright (C) 2026 Ragnatech AB
+ */
+
+#ifndef __UAPI_RPP_X1_CONFIG_H
+#define __UAPI_RPP_X1_CONFIG_H
+
+#include <linux/media/v4l2-isp.h>
+
+/**
+ * struct rppx1_window - Measurement window
+ *
+ * RPP-X1 measurement window. Different blocks use a window or multiple
+ * windows for measurement purposes. This defines a common type for all of
+ * them. The number of relevant bits depends on the block where the window is
+ * used and is specified in the per-block description
+ *
+ * @h_offs: horizontal offset from the left of the frame in pixels
+ * @v_offs: vertical offset from the top of the frame in pixels
+ * @h_size: horizontal size of the window in pixels
+ * @v_size: vertical size of the window in pixels
+ */
+struct rppx1_window {
+	__u16 h_offs;
+	__u16 v_offs;
+	__u16 h_size;
+	__u16 v_size;
+};
+
+/**
+ * enum rppx1_meas_chan - Measurement point for the Histogram and EXM Modules
+ *
+ * Measurement points for the RPP-X1 Histogram measurement module and Exposure
+ * measurement module.
+ *
+ * All tap points are available for the PRE1/PRE2 pipes. Only
+ * RPPX1_MEAS_CHAN_SEL4 and RPPX1_MEAS_CHAN_SEL7 are available for the
+ * MAIN_POST pipe.
+ *
+ * @RPPX1_MEAS_CHAN_SEL0: after input acquisition
+ * @RPPX1_MEAS_CHAN_SEL1: after black level subtraction
+ * @RPPX1_MEAS_CHAN_SEL2: after sensor gamma linearization
+ * @RPPX1_MEAS_CHAN_SEL3: after lens shading correction
+ * @RPPX1_MEAS_CHAN_SEL4: after auto white balance gains
+ * @RPPX1_MEAS_CHAN_SEL5: after defect pixel correction
+ * @RPPX1_MEAS_CHAN_SEL6: after denoise pre-filter
+ * @RPPX1_MEAS_CHAN_SEL7: after demosaicing
+ */
+enum rppx1_meas_chan {
+	RPPX1_MEAS_CHAN_SEL0,
+	RPPX1_MEAS_CHAN_SEL1,
+	RPPX1_MEAS_CHAN_SEL2,
+	RPPX1_MEAS_CHAN_SEL3,
+	RPPX1_MEAS_CHAN_SEL4,
+	RPPX1_MEAS_CHAN_SEL5,
+	RPPX1_MEAS_CHAN_SEL6,
+	RPPX1_MEAS_CHAN_SEL7,
+};
+
+/* ---------------------------------------------------------------------------
+ * Parameter Structures
+ *
+ * The same ISP block might be instantiated in multiple pipeliness and operate
+ * on a different bitdepth/precision. For fields of varying length among
+ * different instances of the same block, use a data type that can accommodate
+ * the larger bitdepth/precision.
+ */
+
+/**
+ * enum rppx1_params_block_type - RPP-X1 extensible params block types
+ *
+ * NOTE: Only append to the enumeration as the numbers are uAPI.
+ *
+ * @RPPX1_PARAMS_BLOCK_TYPE_WBMEAS_POST: AWB Measurement Configuration
+ * @RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE1: PRE1 pipe White Balance Gains
+ * @RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE2: PRE2 White Balance Gains
+ * @RPPX1_PARAMS_BLOCK_TYPE_AWBG_POST: MAIN_POST White Balance Gains
+ * @RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE1: PRE1 pipe Exposure Measurement
+ * @RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE2: PRE2 pipe Exposure Measurement
+ * @RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE1: PRE1 pipe Histogram Measurement
+ * @RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE2: PRE2 pipe Histogram Measurement
+ * @RPPX1_PARAMS_BLOCK_TYPE_HIST_POST: POST pipe Histogram Measurement
+ * @RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE1: PRE1 pipe Black Level Subtraction
+ * @RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE2: PRE2 pipe Black Level Subtraction
+ * @RPPX1_PARAMS_BLOCK_TYPE_CCOR_POST: POST pipe Color Correction
+ * @RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE1: PRE1 pipe Lens Shading Correction
+ * @RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE2: PRE2 pipe Lens Shading Correction
+ * @RPPX1_PARAMS_BLOCK_TYPE_GA_HV: Human Vision Pipe Gamma Out Correction
+ * @RPPX1_PARAMS_BLOCK_TYPE_GA_MV: Machine Vision Gamma Out Correction
+ * @RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE1: PRE1 pipe Linearization (Sensor De-gamma)
+ * @RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE2: PRE2 pipe Linearization (Sensor De-gamma)
+ */
+enum rppx1_params_block_type {
+	RPPX1_PARAMS_BLOCK_TYPE_WBMEAS_POST,
+	RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE1,
+	RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE2,
+	RPPX1_PARAMS_BLOCK_TYPE_AWBG_POST,
+	RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE1,
+	RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE2,
+	RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE1,
+	RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE2,
+	RPPX1_PARAMS_BLOCK_TYPE_HIST_POST,
+	RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE1,
+	RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE2,
+	RPPX1_PARAMS_BLOCK_TYPE_CCOR_POST,
+	RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE1,
+	RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE2,
+	RPPX1_PARAMS_BLOCK_TYPE_GA_HV,
+	RPPX1_PARAMS_BLOCK_TYPE_GA_MV,
+	RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE1,
+	RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE2,
+};
+
+/**
+ * enum rppx1_wbmeas_mode - AWB measurement mode
+ *
+ * @RPPX1_WBMEAS_MODE_YCBCR: YCbCr measurement mode
+ * @RPPX1_WBMEAS_MODE_RGB: RGB measurement mode
+ */
+enum rppx1_wbmeas_mode {
+	RPPX1_WBMEAS_MODE_YCBCR,
+	RPPX1_WBMEAS_MODE_RGB,
+};
+
+/**
+ * struct rppx1_wbmeas_params - AWB measurement configuration
+ *
+ * The Auto-White Balance measurement module is available on the MAIN_POST pipe.
+ * It supports two measurement modes, selected by the @mode field. The
+ * measurement window is programmed through the @wnd field.
+ *
+ * To support measurement in YCbCr mode a color conversion matrix with
+ * programmable offset is available in the @ccor_coeff and @ccor_offs fields.
+ * The color conversion matrix coefficients are represented as 16 bits signed
+ * Q4.12 numbers ranging from -8 to +7.99. The per-color channel offsets are
+ * represented as 25 bits 2's complement integer numbers ranging from -16777216
+ * to +16777215.
+ *
+ * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_WBMEAS_POST)
+ * @wnd: measurement window
+ * @mode: measurement mode (from enum rppx1_wbmeas_mode)
+ * @ymax_cmp: enable Y_MAX compare using @max_y
+ * @frames: number of frames for mean value calculation (0 = 1 frame)
+ * @reserved: padding
+ * @ref_cr_max_r: reference Cr or max red value in RGB mode, 24 bits
+ * @ref_cb_max_b: reference Cb or max blue value in RGB mode, 24 bits
+ * @min_y_max_g: luminance minimum value or max green value in RGB mode, 24 bits
+ * @max_y: luminance maximum value, only valid if @mode is set to YCbCr and
+ *	   @ymax_cmp is set to enabled, 24 bits
+ * @max_csum: chrominance sum maximum value, 24 bits
+ * @min_c: chrominance minimum value, 24 bits
+ * @ccor_coeff: coefficients for color conversion matrix, signed 16 bits Q4.6
+ * @reserved2: padding
+ * @ccor_offs: R-G-B color conversion coefficients, signed 25 bits 2's complement
+ * @reserved3: padding
+ */
+struct rppx1_wbmeas_params {
+	struct v4l2_isp_params_block_header header;
+	struct rppx1_window wnd;
+	__u8 mode;
+	__u8 ymax_cmp;
+	__u8 frames;
+	__u8 reserved;
+	__u32 ref_cr_max_r;
+	__u32 ref_cb_max_b;
+	__u32 min_y_max_g;
+	__u32 max_y;
+	__u32 max_csum;
+	__u32 min_c;
+	__u16 ccor_coeff[3][3];
+	__u16 reserved2;
+	__u32 ccor_offs[3];
+	__u32 reserved3;
+};
+
+/**
+ * struct rppx1_awbg_params  - WB gain configuration
+ *
+ * The RPP-X1 White Balance Gain module is available in the PRE1 and PRE2
+ * pre-fusion pipes and in the MAIN_POST post-fusion pipe. Userspace selects
+ * which pipe to operate by setting the @header.type field to
+ * RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE1, RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE2
+ * or RPPX1_PARAMS_BLOCK_TYPE_AWBG_POST.
+ *
+ * The White Balance module allows to specify per-color channel gains, expressed
+ * as unsigned fixed-point values as 18 bits unsigned integers in Q6.12 format
+ * with a maximum of 63.999.
+ *
+ * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE1 or
+ *	    type = RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE2 or
+ *	    type = RPPX1_PARAMS_BLOCK_TYPE_AWBG_POST)
+ * @gain_red: gain for red component, 18-bit (unsigned Q6.12)
+ * @gain_green_r: gain for green component in red lines, 18-bit (unsigned Q6.12)
+ * @gain_blue: gain for blue component, 18-bit (unsigned Q6.12)
+ * @gain_green_b: gain for green component in blue lines, 18-bit (unsigned Q6.12)
+ */
+struct rppx1_awbg_params {
+	struct v4l2_isp_params_block_header header;
+	__u32 gain_red;
+	__u32 gain_green_r;
+	__u32 gain_blue;
+	__u32 gain_green_b;
+};
+
+/**
+ * enum rppx1_exm_mode - Exposure measurement mode
+ *
+ * Exaposure measurement mode selection (RGB/Bayer).
+ *
+ * @RPPX1_EXP_MEASURING_MODE_DISABLED: no measurement
+ * @RPPX1_EXP_MEASURING_MODE_RGB: Y/R/G/B measurement
+ * @RPPX1_EXP_MEASURING_MODE_BAYER: Bayer RGB measurement
+ */
+enum rppx1_exm_mode {
+	RPPX1_EXP_MEASURING_MODE_DISABLED,
+	RPPX1_EXP_MEASURING_MODE_RGB,
+	RPPX1_EXP_MEASURING_MODE_BAYER,
+};
+
+/**
+ * struct rppx1_exm_params - Exposure measurement configuration
+ *
+ * The RPP-X1 Exposure measurement unit is available on the PRE1 and PRE2
+ * pre-fusion pipes. Userspace selects which pipe to operate by setting
+ * the @header.type field to RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE1 or
+ * RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE2.
+ *
+ * Exposure measurement is performed in the RGB or Bayer domain, according to
+ * the setting of the @mode field. The exposure measurement tap point is
+ * selected according to the value of @channel_sel.
+ *
+ * The exposure measurement is performed on an input window specified in @wnd.
+ * To each color component a programmable weight coefficient is associated.
+ * Coefficients are represented as unsigned 8 bits integer values in Q1.7 format
+ * ranging from 0 to 1.992.
+ *
+ * The @last_line fields controls when the exposure measurement completes. It
+ * is usually programmed to the value of (@wnd.v_offs + @wnd.v_size + 1).
+ *
+ * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE1 or
+ *	    type = RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE2)
+ * @wnd: measurement window coordinates
+ * @mode: exposure measure mode (from enum rppx1_exm_mode)
+ * @last_line: line number for which the exposure measurement completes
+ * @channel_sel: exposure measurement point (see enum rppx1_meas_chan)
+ * @coeff_r: coefficient for the red Bayer sample or red color channel, Q1.7
+ * @coeff_g_gr: coefficient for the green/red Bayer sample or green color channel, Q1.7
+ * @coeff_b: coefficient for the blue Bayer sample or blue color channel, Q1.7
+ * @coeff_gb: coefficient for the green/blue Bayer sample, unused in RGB mode, Q1.7
+ * @reserved: padding
+ */
+struct rppx1_exm_params {
+	struct v4l2_isp_params_block_header header;
+	struct rppx1_window wnd;
+	__u32 mode;
+	__u32 last_line;
+	__u8 channel_sel;
+	__u8 coeff_r;
+	__u8 coeff_g_gr;
+	__u8 coeff_b;
+	__u8 coeff_gb;
+	__u8 reserved[3];
+};
+
+/* Histogram */
+#define RPPX1_HIST_WEIGHT_GRIDS_SIZE 25
+
+/**
+ * enum rppx1_hist_mode - Histogram measurement mode
+ *
+ * Histogram measurement mode. Select which channel or combination of channels
+ * the histogram measurement is performed on.
+ *
+ * @RPPX1_HIST_MODE_DISABLE: histogram disabled
+ * @RPPX1_HIST_MODE_RGB_COMBINED: combined RGB histogram
+ * @RPPX1_HIST_MODE_R_HISTOGRAM: red channel histogram
+ * @RPPX1_HIST_MODE_GR_HISTOGRAM: green/red channel histogram
+ * @RPPX1_HIST_MODE_B_HISTOGRAM: blue channel histogram
+ * @RPPX1_HIST_MODE_GB_HISTOGRAM: green/blue histogram
+ */
+enum rppx1_hist_mode {
+	RPPX1_HIST_MODE_DISABLE,
+	RPPX1_HIST_MODE_RGB_COMBINED,
+	RPPX1_HIST_MODE_R_HISTOGRAM,
+	RPPX1_HIST_MODE_GR_HISTOGRAM,
+	RPPX1_HIST_MODE_B_HISTOGRAM,
+	RPPX1_HIST_MODE_GB_HISTOGRAM,
+};
+
+/**
+ * struct rppx1_hist_params - Histogram measurement configuration
+ *
+ * The RPP-X1 Histogram measurement unit is available on the PRE1, PRE2 and
+ * MAIN_POST pipes. Userspace selects which pipe to operate by setting the
+ * @header.type field to RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE1,
+ * RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE2 or
+ * RPPX1_PARAMS_BLOCK_TYPE_HIST_POST.
+ *
+ * The histogram measurement point is selected using the @channel field while
+ * histogram measurement mode is selected using the @mode field.
+ *
+ * Histogram measurement is performed by programming subsampling factors using
+ * the @v_stepsize and @h_step_inc fields and by weighted windowing, by
+ * programming the size of the measurement window @wnd with @weights associated
+ * to each cell of the 5x5 measurement grid. Weights are represented as 5 bits
+ * integer values ranging from 0 to 16.
+ *
+ * The @last_line fields controls when the histogram measurement completes. It
+ * is usually programmed to the value of (@wnd.v_offs + @wnd.v_size - 1).
+ *
+ * Histogram values are calculated by applying a per-color channel coefficient
+ * represented as an 8 bits unsigned Q1.7 integer value. The @sample_offs and
+ * @sample_shift fields allow to reduce the color dynamic range on which
+ * histogram data are produced.
+ *
+ * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE1,
+ *	    type = RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE2 or
+ *	    type = RPPX1_PARAMS_BLOCK_TYPE_HIST_POST)
+ * @wnd: measurement window coordinates
+ * @last_line: line number for which the histogram measurement completes
+ * @v_stepsize: vertical subsampling divider, 7 bits
+ * @h_step_inc: horizontal subsampling step counter, 17 bits
+ * @sample_offs: sample offset, 24 bits
+ * @mode: histogram measurement mode (from enum rppx1_hist_mode)
+ * @channel_sel: histogram measurement point (see enum rppx1_meas_chan)
+ * @weights: weighting factors for each sub-window (5x5 grid)
+ * @coeff: R-G-B coefficients, 8 bits unsigned Q1.7
+ * @sample_shift: sample shift, 4 bits
+ * @reserved: padding
+ */
+struct rppx1_hist_params {
+	struct v4l2_isp_params_block_header header;
+	struct rppx1_window wnd;
+	__u32 last_line;
+	__u32 v_stepsize;
+	__u32 h_step_inc;
+	__u32 sample_offs;
+	__u8 mode;
+	__u8 channel_sel;
+	__u8 weights[RPPX1_HIST_WEIGHT_GRIDS_SIZE];
+	__u8 coeff[3];
+	__u8 sample_shift;
+	__u8 reserved;
+};
+
+/**
+ * struct rppx1_bls_fixed - BLS fixed subtraction values
+ *
+ * Fixed black level values subtracted from sensor data per Bayer channel.
+ * Negative values result in addition.
+ *
+ * The PRE1 pipe BLS module operates on a 24-bits input data and fixed black
+ * levels are stored as a signed 2's complement representation ranging from
+ * -2^24 to 2^24-1.
+ *
+ * The PRE2 pipe BLS module operates on a 12-bits input data and fixed black
+ * levels are stored as a signed 2's complement representation ranging from
+ * -2^12 to 2^12-1.
+ *
+ * Userspace is expected to provide fixed black level values with a bit-depth
+ * matching the one of pipe in use.
+ *
+ * These subtraction values are matched with the sensor native Bayer components
+ * ordering according to the cropping configuration on the input port.
+ *
+ * @a: subtraction value for channel A
+ * @b: subtraction value for channel B
+ * @c: subtraction value for channel C
+ * @d: subtraction value for channel D
+ */
+struct rppx1_bls_fixed {
+	__u32 a;
+	__u32 b;
+	__u32 c;
+	__u32 d;
+};
+
+/**
+ * enum rppx1_bls_mode - BLS subtraction mode
+ *
+ * Select if subtracted black level come from fixed or measured values.
+ *
+ * @RPPX1_BLS_MODE_FIXED: subtract fixed values
+ * @RPPX1_BLS_MODE_MEAS: subtract measured values
+ */
+enum rppx1_bls_mode {
+	RPPX1_BLS_MODE_FIXED,
+	RPPX1_BLS_MODE_MEAS,
+};
+
+/**
+ * enum rppx1_bls_win_en: BLS measurement configuration
+ *
+ * Select the measurement window to use for measured black level values.
+ *
+ * @RPPX1_BLS_WIN_EN_OFF: disable measurement
+ * @RPPX1_BLS_WIN_EN_WIN1: Enable measurement from window 1
+ * @RPPX1_BLS_WIN_EN_WIN2: enable measurement from window 2
+ * @RPPX1_BLS_WIN_EN_WIN12: enable measurement from window 1 and window 2
+ */
+enum rppx1_bls_win_en {
+	RPPX1_BLS_WIN_EN_OFF,
+	RPPX1_BLS_WIN_EN_WIN1,
+	RPPX1_BLS_WIN_EN_WIN2,
+	RPPX1_BLS_WIN_EN_WIN12,
+};
+
+/**
+ * struct rppx1_bls_params - RPP-X1 Black Level Subtraction Module
+ *
+ * The RPP-X1 Black Level Subtraction module is available on the PRE1 and PRE2
+ * pre-fusion pipes. Userspace selects which pipe to operate by setting the
+ * @header.type field to RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE1 or
+ * RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE2.
+ *
+ * The BLS module operates on fixed or measured data according to the setting of
+ * the @mode field. When RPPX1_BLS_MODE_FIXED is used userspace shall provide
+ * the per-channel black levels in @fixed. When RPPX1_BLS_MODE_MEAS is used
+ * userspace shall configure the measurement windows @window1 and optionally
+ * @window2 to select the optically black pixels region in the input frame. The
+ * @samples fields controls how many measure samples are used for averaging the
+ * measured black levels.
+ *
+ * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE1 or
+ *	    type == RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE2)
+ * @window1: BLS measurement window 1 (14 bits)
+ * @window2: BLS measurement window 2 (14 bits)
+ * @fixed: fixed subtraction values (see enum rppx1_bls_fixed)
+ * @mode: BLS subtraction mode (see enum rppx1_bls_mode)
+ * @en_windows: BLS measurement mode (see rppx1_bls_win_en)
+ * @samples: log2 of the number of measured pixels per Bayer position
+ * @reserved: padding
+ */
+struct rppx1_bls_params {
+	struct v4l2_isp_params_block_header header;
+	struct rppx1_window window1;
+	struct rppx1_window window2;
+	struct rppx1_bls_fixed fixed;
+	__u8 mode;
+	__u8 en_windows;
+	__u8 samples;
+	__u8 reserved[5];
+};
+
+/**
+ * struct rppx1_ccor_params - Color CORrection configuration
+ *
+ * The CCOR (Color Correction) module is available on the MAIN_POST pipe. It
+ * performs color space correction on a pixel-per-pixel basis using a 3x3 matrix
+ * of coefficients and per-color channel offsets.
+ *
+ * The matrix coefficients are represented as 16 bits signed fixed point values
+ * in Q4.12 format ranging from -8 to +7.999.
+ *
+ * The per-channel color offsets are represented as 2's complement values
+ * stored in 25 bits ranging from -16777216 to 16777215.
+ *
+ * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_CCOR_POST)
+ * @coeff: color correction matrix coefficients, 16 bits signed Q4.12
+ * @reserved: padding
+ * @offset: R, G, B offsets, 2's complement 25 bits
+ */
+struct rppx1_ccor_params {
+	struct v4l2_isp_params_block_header header;
+	__u16 coeff[3][3];
+	__u16 reserved;
+	__u32 offset[3];
+};
+
+/* Lens Shade Correction */
+#define RPPX1_LSC_SAMPLES_MAX 17
+#define RPPX1_LSC_NUM_SECTORS 16
+
+/**
+ * struct rppx1_lsc_params - Lens Shading Correction configuration
+ *
+ * The RPP-X1 Lens shading correction module is available on the PRE1 and PRE2
+ * pre-fusion pipes. Userspace selects which pipe to operate by setting the
+ * @header.type field to RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE1 or
+ * RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE2.
+ *
+ * The module applies per-color channel correction factors @r_data, @gr_data,
+ * @gb_data and @b_data as a 16x16 grid mapped on the image. The size of each
+ * grid segment is expressed by the @x_sect_size and @y_sect_size arrays.  Each
+ * segment shall be at least 8 pixels in size and the sum of all horizontal
+ * segments @x_sect_size shall match the input frame size width.
+ *
+ * The correction factors values are expressed as unsigned Q2.10 integers
+ * ranging from 1 to 3.999.
+ *
+ * Pre-calculated interpolation factors shall be provided in the @x_grad
+ * and @y_grad fields, expressed as 12 bits integer values.
+ *
+ * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_LSC)
+ * @r_data: correction factors for the red channel in Q2.10 format
+ * @gr_data: correction factors for the green (red) channel in Q2.10 format
+ * @gb_data: correction factors for the green (blue) channel in Q2.10 format
+ * @b_data: correction factors for the blue channel in Q2.10 format
+ * @x_grad: Interpolation gradients for each horizontal sector (12 bits)
+ * @y_grad: Interpolation gradients for each vertical sector (12 bits)
+ * @x_sect_size: Horizontal sectors sizes
+ * @y_sect_size: Vertical sectors sizes
+ */
+struct rppx1_lsc_params {
+	struct v4l2_isp_params_block_header header;
+	__u16 r_data[RPPX1_LSC_SAMPLES_MAX][RPPX1_LSC_SAMPLES_MAX];
+	__u16 gr_data[RPPX1_LSC_SAMPLES_MAX][RPPX1_LSC_SAMPLES_MAX];
+	__u16 gb_data[RPPX1_LSC_SAMPLES_MAX][RPPX1_LSC_SAMPLES_MAX];
+	__u16 b_data[RPPX1_LSC_SAMPLES_MAX][RPPX1_LSC_SAMPLES_MAX];
+	__u16 x_grad[RPPX1_LSC_NUM_SECTORS];
+	__u16 y_grad[RPPX1_LSC_NUM_SECTORS];
+	__u16 x_sect_size[RPPX1_LSC_NUM_SECTORS];
+	__u16 y_sect_size[RPPX1_LSC_NUM_SECTORS];
+};
+
+/* Gamma Out */
+#define RPPX1_GA_MAX_SAMPLES 17
+
+/**
+ * enum rppx1_ga_seg_mode - Gamma out curve segmentation mode
+ *
+ * Segmentation mode of the 16 input sampling points for the Gamma Out
+ * Correction module.
+ *
+ * @RPPX1_GA_SEG_MODE_LOGARITHMIC: logarithmic-like segmentation mode
+ * @RPPX1_GA_SEG_MODE_EQUIDISTANT: equidistant segmentation mode
+ */
+enum rppx1_ga_seg_mode {
+	RPPX1_GA_SEG_MODE_LOGARITHMIC,
+	RPPX1_GA_SEG_MODE_EQUIDISTANT
+};
+
+/**
+ * struct rppx1_ga_params - Gamma Out Correction configuration
+ *
+ * The Gamma Out Correction module is available on the Human Vision Output
+ * Pipe (HV) and the Machine Vision Output Pipe (MV). Userspace selects
+ * which pipe to operate by setting the @header.type field to
+ * RPPX1_PARAMS_BLOCK_TYPE_GA_HV or RPPX1_PARAMS_BLOCK_TYPE_GA_MV.
+ *
+ * The module allows to apply a @gamma_y gamma correction curve to RGB data
+ * represented as a table of 16 entries. The 16 input sampling points can be
+ * equidistant or segmented using a logarithmic scale according to the value of
+ * @mode.
+ *
+ * The gamma curve values are 12 bits on the HV output pipe and 24 bits on the
+ * MV output pipe. Userspace is expected to provide the curve values with a
+ * bit-depth matching the one of pipe in use.
+ *
+ * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_GA_HV or
+ *	    type = RPPX1_PARAMS_BLOCK_TYPE_GA_MV)
+ * @gamma_y: gamma out curve y-axis values
+ * @mode: gamma curve input segmentation mode (see rppx1_ga_seg_mode)
+ * @reserved: padding
+ */
+struct rppx1_ga_params {
+	struct v4l2_isp_params_block_header header;
+	__u32 gamma_y[RPPX1_GA_MAX_SAMPLES];
+	__u8 mode;
+	__u8 reserved[3];
+};
+
+/* Linearization (Sensor De-gamma) */
+#define RPPX1_LIN_SAMPLE_POINTS_NUM 16
+#define RPPX1_LIN_DEGAMMA_CURVE_NUM 17
+
+/**
+ * struct rppx1_lin_params - Linearization (Sensor De-gamma) configuration
+ *
+ * The RPP-X1 linearization module is available on the PRE1 and PRE2 pre-fusion
+ * pipes. Userspace selects which pipe to operate by setting the @header.type
+ * field to RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE1 or
+ * RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE2.
+ *
+ * The LIN module applies the per-color channel de-gamma linearization curves
+ * @curve_r, @curve_g and @curve_b defined on the input sampling points @dx.
+ *
+ * For the PRE1 pipe the de-gamma curves values are 24-bits, for the PRE2 pipe
+ * the de-gamma curve values are 12-bits.
+ *
+ * For the PRE1 pipe de-gamma module sampling points @dx values are in the range
+ * [0, 15] (4 bits). For the PRE2 pipe de-gamma module sampling points values
+ * are in the range [0, 7] (3 bits).
+ *
+ * Userspace is expected to provide the curve values and sampling points with a
+ * bit-depth matching the one of pipe in use.
+ *
+ * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE1 or
+ *	    RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE2)
+ * @curve_r: de-gamma linearization curve for red channel
+ * @curve_g: de-gamma linearization curve for green channel
+ * @curve_b: de-gamma linearization curve for blue channel
+ * @dx: input sampling points
+ * @reserved: padding
+ */
+struct rppx1_lin_params {
+	struct v4l2_isp_params_block_header header;
+	__u32 curve_r[RPPX1_LIN_DEGAMMA_CURVE_NUM];
+	__u32 curve_g[RPPX1_LIN_DEGAMMA_CURVE_NUM];
+	__u32 curve_b[RPPX1_LIN_DEGAMMA_CURVE_NUM];
+	__u8 dx[RPPX1_LIN_SAMPLE_POINTS_NUM];
+	__u32 reserved;
+};
+
+/**
+ * RPPX1_PARAMS_MAX_SIZE - Maximum size of all RPP-X1 parameter blocks
+ *
+ * Some types are reported twice as the same block might be instantiated in
+ * multiple pipes.
+ */
+#define RPPX1_PARAMS_MAX_SIZE						\
+	(sizeof(struct rppx1_wbmeas_params)			+	\
+	sizeof(struct rppx1_awbg_params)			+	\
+	sizeof(struct rppx1_awbg_params)			+	\
+	sizeof(struct rppx1_awbg_params)			+	\
+	sizeof(struct rppx1_exm_params)				+	\
+	sizeof(struct rppx1_exm_params)				+	\
+	sizeof(struct rppx1_hist_params)			+	\
+	sizeof(struct rppx1_hist_params)			+	\
+	sizeof(struct rppx1_hist_params)			+	\
+	sizeof(struct rppx1_bls_params)				+	\
+	sizeof(struct rppx1_bls_params)				+	\
+	sizeof(struct rppx1_ccor_params)			+	\
+	sizeof(struct rppx1_lsc_params)				+	\
+	sizeof(struct rppx1_lsc_params)				+	\
+	sizeof(struct rppx1_ga_params)				+	\
+	sizeof(struct rppx1_ga_params)				+	\
+	sizeof(struct rppx1_lin_params)				+	\
+	sizeof(struct rppx1_lin_params))
+
+/* ---------------------------------------------------------------------------
+ * Statistics Structures
+ *
+ * The same ISP block might be instantiated in multiple pipeliness and operate
+ * on a different bitdepth/precision. For fields of varying length among
+ * different instances of the same block, use a data type that can accommodate
+ * the larger bitdepth/precision.
+ */
+
+/**
+ * enum rppx1_stats_block_type - RPP-X1 extensible stats block types
+ *
+ * NOTE: Only append to the enumeration as the numbers are uAPI.
+ *
+ * @RPPX1_STATS_BLOCK_TYPE_WBMEAS_POST: post-fusion white-balance measurement
+ * @RPPX1_STATS_BLOCK_TYPE_EXM_PRE1: pre-fusion pipe1 exposure measurement
+ * @RPPX1_STATS_BLOCK_TYPE_EXM_PRE2: pre-fusion pipe2 exposure measurement
+ * @RPPX1_STATS_BLOCK_TYPE_HIST_PRE1: pre-fusion pipe1 histogram
+ * @RPPX1_STATS_BLOCK_TYPE_HIST_PRE2: pre-fusion pipe2 histogram
+ * @RPPX1_STATS_BLOCK_TYPE_HIST_POST: post-fusion histogram
+ */
+enum rppx1_stats_block_type {
+	RPPX1_STATS_BLOCK_TYPE_WBMEAS_POST,
+	RPPX1_STATS_BLOCK_TYPE_EXM_PRE1,
+	RPPX1_STATS_BLOCK_TYPE_EXM_PRE2,
+	RPPX1_STATS_BLOCK_TYPE_HIST_PRE1,
+	RPPX1_STATS_BLOCK_TYPE_HIST_PRE2,
+	RPPX1_STATS_BLOCK_TYPE_HIST_POST,
+};
+
+/**
+ * struct rppx1_wbmeas_stats - AWB statistics
+ *
+ * @header: block header (type = RPPX1_STATS_BLOCK_TYPE_WBMEAS_POST)
+ * @cnt: Number of pixels matched
+ * @mean_y_or_g: mean Y (or G in RGB mode) value, 24-bit
+ * @mean_cb_or_b: mean Cb (or B in RGB mode) value, 24-bit
+ * @mean_cr_or_r: mean Cr (or R in RGB mode) value, 24-bit
+ */
+struct rppx1_wbmeas_stats {
+	struct v4l2_isp_block_header header;
+	__u32 cnt;
+	__u32 mean_y_or_g;
+	__u32 mean_cb_or_b;
+	__u32 mean_cr_or_r;
+};
+
+/* Exposure Measurement */
+#define RPPX1_EXM_NUM_WIN 25
+
+/**
+ * struct rppx1_exm_stats - Exposure measurement
+ *
+ * RPP-X1 exposure measurement calculates the mean value on 25 programmable
+ * windows on the input picture.
+ *
+ * @header: block header (type = RPPX1_STATS_BLOCK_TYPE_EXM_PRE1)
+ * @exp_mean: mean luminance values per block, up to 20-bit
+ * @reserved: padding
+ */
+struct rppx1_exm_stats {
+	struct v4l2_isp_block_header header;
+	__u32 exp_mean[RPPX1_EXM_NUM_WIN];
+	__u32 reserved;
+};
+
+/* Histogram */
+#define RPPX1_HIST_NUM_BINS 32
+
+/**
+ * struct rppx1_hist_stats - Histogram statistics
+ *
+ * @header: block header (type = RPPX1_STATS_BLOCK_TYPE_HIST_POST)
+ * @hist_bins: accumulation histogram results in unsigned 20-bit Q16.4 format
+ */
+struct rppx1_hist_stats {
+	struct v4l2_isp_block_header header;
+	__u32 hist_bins[RPPX1_HIST_NUM_BINS];
+};
+
+/**
+ * RPPX1_STATS_MAX_SIZE - Maximum size of all RPP-X1 statistics
+ *
+ * Some types are reported twice as the same block might be instantiated in
+ * multiple pipes.
+ */
+#define RPPX1_STATS_MAX_SIZE						\
+	(sizeof(struct rppx1_wbmeas_stats)			+	\
+	sizeof(struct rppx1_exm_stats)				+	\
+	sizeof(struct rppx1_exm_stats)				+	\
+	sizeof(struct rppx1_hist_stats)				+	\
+	sizeof(struct rppx1_hist_stats)				+	\
+	sizeof(struct rppx1_hist_stats))
+
+#endif /* __UAPI_RPP_X1_CONFIG_H */
diff --git a/include/uapi/linux/media/v4l2-isp.h b/include/uapi/linux/media/v4l2-isp.h
index 779168f9058e..e4607e1217e1 100644
--- a/include/uapi/linux/media/v4l2-isp.h
+++ b/include/uapi/linux/media/v4l2-isp.h
@@ -13,25 +13,33 @@
 #include <linux/types.h>
 
 /**
- * enum v4l2_isp_params_version - V4L2 ISP parameters versioning
+ * enum v4l2_isp_version - V4L2 ISP serialization format versioning
  *
- * @V4L2_ISP_PARAMS_VERSION_V0: First version of the V4L2 ISP parameters format
- *				(for compatibility)
- * @V4L2_ISP_PARAMS_VERSION_V1: First version of the V4L2 ISP parameters format
+ * @V4L2_ISP_VERSION_V0: First version of the V4L2 ISP serialization format
+ *                       (for compatibility)
+ * @V4L2_ISP_VERSION_V1: First version of the V4L2 ISP serialization format
  *
  * V0 and V1 are identical in order to support drivers compatible with the V4L2
- * ISP parameters format already upstreamed which use either 0 or 1 as their
- * versioning identifier. Both V0 and V1 refers to the first version of the
- * V4L2 ISP parameters format.
+ * ISP format already upstreamed which use either 0 or 1 as their versioning
+ * identifier. Both V0 and V1 refers to the first version of the V4L2 ISP
+ * serialization format.
  *
- * Future revisions of the V4L2 ISP parameters format should start from the
+ * Future revisions of the V4L2 ISP serialization format should start from the
  * value of 2.
  */
-enum v4l2_isp_params_version {
-	V4L2_ISP_PARAMS_VERSION_V0 = 0,
-	V4L2_ISP_PARAMS_VERSION_V1
+enum v4l2_isp_version {
+	V4L2_ISP_VERSION_V0 = 0,
+	V4L2_ISP_VERSION_V1
 };
 
+/*
+ * Compatibility with existing users of v4l2_isp_params which pre-date the
+ * introduction of v4l2_isp_stats.
+ */
+#define v4l2_isp_params_version			v4l2_isp_version
+#define V4L2_ISP_PARAMS_VERSION_V0		V4L2_ISP_VERSION_V0
+#define V4L2_ISP_PARAMS_VERSION_V1		V4L2_ISP_VERSION_V1
+
 #define V4L2_ISP_PARAMS_FL_BLOCK_DISABLE	(1U << 0)
 #define V4L2_ISP_PARAMS_FL_BLOCK_ENABLE		(1U << 1)
 
@@ -39,64 +47,89 @@ enum v4l2_isp_params_version {
  * Reserve the first 8 bits for V4L2_ISP_PARAMS_FL_* flag.
  *
  * Driver-specific flags should be defined as:
- * #define DRIVER_SPECIFIC_FLAG0     ((1U << V4L2_ISP_PARAMS_FL_DRIVER_FLAGS(0))
- * #define DRIVER_SPECIFIC_FLAG1     ((1U << V4L2_ISP_PARAMS_FL_DRIVER_FLAGS(1))
+ * #define DRIVER_SPECIFIC_FLAG0     ((1U << V4L2_ISP_FL_DRIVER_FLAGS(0))
+ * #define DRIVER_SPECIFIC_FLAG1     ((1U << V4L2_ISP_FL_DRIVER_FLAGS(1))
  */
-#define V4L2_ISP_PARAMS_FL_DRIVER_FLAGS(n)       ((n) + 8)
+#define V4L2_ISP_FL_DRIVER_FLAGS(n)		((n) + 8)
 
 /**
- * struct v4l2_isp_params_block_header - V4L2 extensible parameters block header
- * @type: The parameters block type (driver-specific)
+ * struct v4l2_isp_block_header - V4L2 extensible block header
+ * @type: The parameters or statistics block type (driver-specific)
  * @flags: A bitmask of block flags (driver-specific)
- * @size: Size (in bytes) of the parameters block, including this header
+ * @size: Size (in bytes) of the block, including this header
  *
- * This structure represents the common part of all the ISP configuration
- * blocks. Each parameters block shall embed an instance of this structure type
- * as its first member, followed by the block-specific configuration data.
+ * This structure represents the common part of all the ISP configuration or
+ * statistic blocks. Each block shall embed an instance of this structure type
+ * as its first member, followed by the block-specific configuration or
+ * statistic data.
  *
  * The @type field is an ISP driver-specific value that identifies the block
- * type. The @size field specifies the size of the parameters block.
+ * type. The @size field specifies the size of the block, including this
+ * header.
  *
- * The @flags field is a bitmask of per-block flags V4L2_PARAMS_ISP_FL_* and
- * driver-specific flags specified by the driver header.
+ * The @flags field is a bitmask of per-block flags. If a block is used for
+ * configuration parameters this field can be a combination of
+ * V4L2_ISP_PARAMS_FL_* and driver-specific flags. If a block is used
+ * for statistics this fields is used to report optional
+ * driver-specific flags, if any.
  */
-struct v4l2_isp_params_block_header {
+struct v4l2_isp_block_header {
 	__u16 type;
 	__u16 flags;
 	__u32 size;
 } __attribute__((aligned(8)));
 
 /**
- * struct v4l2_isp_params_buffer - V4L2 extensible parameters configuration
- * @version: The parameters buffer version (driver-specific)
- * @data_size: The configuration data effective size, excluding this header
- * @data: The configuration data
+ * v4l2_isp_params_block_header - V4L2 extensible parameters block header
+ *
+ * Compatibility with existing users of v4l2_isp_params_block_header
+ * which pre-date the introduction of v4l2_isp_block_header.
+ */
+#define v4l2_isp_params_block_header v4l2_isp_block_header
+
+/**
+ * struct v4l2_isp_buffer - V4L2 extensible buffer
+ * @version: The extensible buffer version (driver-specific)
+ * @data_size: The data effective size, excluding this header
+ * @data: The configuration or statistics data
  *
- * This structure contains the configuration parameters of the ISP algorithms,
- * serialized by userspace into a data buffer. Each configuration parameter
- * block is represented by a block-specific structure which contains a
- * :c:type:`v4l2_isp_params_block_header` entry as first member. Userspace
- * populates the @data buffer with configuration parameters for the blocks that
- * it intends to configure. As a consequence, the data buffer effective size
- * changes according to the number of ISP blocks that userspace intends to
- * configure and is set by userspace in the @data_size field.
+ * This structure contains ISP configuration parameters or ISP hardware
+ * statistics serialized into a data buffer. Each block is represented by a
+ * block-specific structure which contains a :c:type:`v4l2_isp_block_header`
+ * entry as first member.
  *
- * The parameters buffer is versioned by the @version field to allow modifying
- * and extending its definition. Userspace shall populate the @version field to
- * inform the driver about the version it intends to use. The driver will parse
- * and handle the @data buffer according to the data layout specific to the
- * indicated version and return an error if the desired version is not
+ * When used for ISP parameters, userspace populates the @data buffer with
+ * configuration parameters for the blocks that it intends to configure. As a
+ * consequence, the data buffer effective size changes according to the number
+ * of ISP blocks that userspace intends to configure.
+ *
+ * When used to report ISP statistics, the driver populates the @data buffer
+ * with statistics for each supported measurement block.
+ *
+ * The buffer is versioned by the @version field to allow modifying
+ * and extending its definition. The writer shall populate the @version field
+ * to inform the reader about the version it intends to use. The reader will
+ * parse and handle the @data buffer according to the data layout specific to
+ * the indicated version and return an error if the desired version is not
  * supported.
  *
- * For each ISP block that userspace wants to configure, a block-specific
- * structure is appended to the @data buffer, one after the other without gaps
- * in between. Userspace shall populate the @data_size field with the effective
- * size, in bytes, of the @data buffer.
+ * For each ISP block, a block-specific structure is appended to the @data
+ * buffer, one after the other without gaps in between. The writer shall
+ * populate the @data_size field with the effective size, in bytes, of the
+ * @data buffer.
  */
-struct v4l2_isp_params_buffer {
+struct v4l2_isp_buffer {
 	__u32 version;
 	__u32 data_size;
 	__u8 data[] __counted_by(data_size);
 };
 
+/**
+ * v4l2_isp_params_buffer - V4L2 extensible parameters compatibility
+ *
+ * Compatibility with existing users of v4l2_isp_params_buffer which
+ * pre-date the introduction of v4l2_isp_buffer.
+ */
+#define v4l2_isp_params_buffer v4l2_isp_buffer
+
 #endif /* _UAPI_V4L2_ISP_H_ */
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index eda4492e40dc..5373dba640fa 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -889,6 +889,10 @@ struct v4l2_pix_format {
 #define V4L2_META_FMT_MALI_C55_PARAMS	v4l2_fourcc('C', '5', '5', 'P') /* ARM Mali-C55 Parameters */
 #define V4L2_META_FMT_MALI_C55_STATS	v4l2_fourcc('C', '5', '5', 'S') /* ARM Mali-C55 3A Statistics */
 
+/* Vendor specific - used for Dreamchip RPP-X1 ISP */
+#define V4L2_META_FMT_RPPX1_PARAMS	v4l2_fourcc('D', 'R', '1', 'P') /* Dreamchip RPP-X1 Parameters */
+#define V4L2_META_FMT_RPPX1_STATS	v4l2_fourcc('D', 'R', '1', 'S') /* Dreamchip RPP-X1 Statistics */
+
 #ifdef __KERNEL__
 /*
  * Line-based metadata formats. Remember to update v4l_fill_fmtdesc() when