diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2026-06-17 08:17:00 +0100 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2026-06-17 08:17:00 +0100 |
| commit | b85966adbf5de0668a815c6e3527f87e0c387fb4 (patch) | |
| tree | b8dfe0ed52e9b2aba27909cdaae578fb028524b4 /include/uapi/linux | |
| parent | 6b5a2b7d9bc156e505f09e698d85d6a1547c1206 (diff) | |
| parent | d954a67a7dfa58b7a9b3194322d321b940eb60c8 (diff) | |
Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
Diffstat (limited to 'include/uapi/linux')
29 files changed, 412 insertions, 619 deletions
diff --git a/include/uapi/linux/atm_eni.h b/include/uapi/linux/atm_eni.h deleted file mode 100644 index cf5bfd1a2691..000000000000 --- a/include/uapi/linux/atm_eni.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_eni.h - Driver-specific declarations of the ENI driver (for use by - driver-specific utilities) */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATM_ENI_H -#define LINUX_ATM_ENI_H - -#include <linux/atmioc.h> - - -struct eni_multipliers { - int tx,rx; /* values are in percent and must be > 100 */ -}; - - -#define ENI_MEMDUMP _IOW('a',ATMIOC_SARPRV,struct atmif_sioc) - /* printk memory map */ -#define ENI_SETMULT _IOW('a',ATMIOC_SARPRV+7,struct atmif_sioc) - /* set buffer multipliers */ - -#endif diff --git a/include/uapi/linux/atm_he.h b/include/uapi/linux/atm_he.h deleted file mode 100644 index 9f4b43293988..000000000000 --- a/include/uapi/linux/atm_he.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_he.h */ - -#ifndef LINUX_ATM_HE_H -#define LINUX_ATM_HE_H - -#include <linux/atmioc.h> - -#define HE_GET_REG _IOW('a', ATMIOC_SARPRV, struct atmif_sioc) - -#define HE_REGTYPE_PCI 1 -#define HE_REGTYPE_RCM 2 -#define HE_REGTYPE_TCM 3 -#define HE_REGTYPE_MBOX 4 - -struct he_ioctl_reg { - unsigned addr, val; - char type; -}; - -#endif /* LINUX_ATM_HE_H */ diff --git a/include/uapi/linux/atm_idt77105.h b/include/uapi/linux/atm_idt77105.h deleted file mode 100644 index f0fd6912a14b..000000000000 --- a/include/uapi/linux/atm_idt77105.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_idt77105.h - Driver-specific declarations of the IDT77105 driver (for - * use by driver-specific utilities) */ - -/* Written 1999 by Greg Banks <gnb@linuxfan.com>. Copied from atm_suni.h. */ - - -#ifndef LINUX_ATM_IDT77105_H -#define LINUX_ATM_IDT77105_H - -#include <linux/types.h> -#include <linux/atmioc.h> -#include <linux/atmdev.h> - -/* - * Structure for IDT77105_GETSTAT and IDT77105_GETSTATZ ioctls. - * Pointed to by `arg' in atmif_sioc. - */ -struct idt77105_stats { - __u32 symbol_errors; /* wire symbol errors */ - __u32 tx_cells; /* cells transmitted */ - __u32 rx_cells; /* cells received */ - __u32 rx_hec_errors; /* Header Error Check errors on receive */ -}; - -#define IDT77105_GETSTAT _IOW('a',ATMIOC_PHYPRV+2,struct atmif_sioc) /* get stats */ -#define IDT77105_GETSTATZ _IOW('a',ATMIOC_PHYPRV+3,struct atmif_sioc) /* get stats and zero */ - -#endif diff --git a/include/uapi/linux/atm_nicstar.h b/include/uapi/linux/atm_nicstar.h deleted file mode 100644 index 880d368b5b9a..000000000000 --- a/include/uapi/linux/atm_nicstar.h +++ /dev/null @@ -1,54 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/****************************************************************************** - * - * atm_nicstar.h - * - * Driver-specific declarations for use by NICSTAR driver specific utils. - * - * Author: Rui Prior - * - * (C) INESC 1998 - * - ******************************************************************************/ - - -#ifndef LINUX_ATM_NICSTAR_H -#define LINUX_ATM_NICSTAR_H - -/* Note: non-kernel programs including this file must also include - * sys/types.h for struct timeval - */ - -#include <linux/atmapi.h> -#include <linux/atmioc.h> - -#define NS_GETPSTAT _IOWR('a',ATMIOC_SARPRV+1,struct atmif_sioc) - /* get pool statistics */ -#define NS_SETBUFLEV _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc) - /* set buffer level markers */ -#define NS_ADJBUFLEV _IO('a',ATMIOC_SARPRV+3) - /* adjust buffer level */ - -typedef struct buf_nr -{ - unsigned min; - unsigned init; - unsigned max; -}buf_nr; - - -typedef struct pool_levels -{ - int buftype; - int count; /* (At least for now) only used in NS_GETPSTAT */ - buf_nr level; -} pool_levels; - -/* type must be one of the following: */ -#define NS_BUFTYPE_SMALL 1 -#define NS_BUFTYPE_LARGE 2 -#define NS_BUFTYPE_HUGE 3 -#define NS_BUFTYPE_IOVEC 4 - - -#endif /* LINUX_ATM_NICSTAR_H */ diff --git a/include/uapi/linux/atm_tcp.h b/include/uapi/linux/atm_tcp.h deleted file mode 100644 index 7309e1bc8867..000000000000 --- a/include/uapi/linux/atm_tcp.h +++ /dev/null @@ -1,62 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_tcp.h - Driver-specific declarations of the ATMTCP driver (for use by - driver-specific utilities) */ - -/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef _UAPILINUX_ATM_TCP_H -#define _UAPILINUX_ATM_TCP_H - -#include <linux/atmapi.h> -#include <linux/atm.h> -#include <linux/atmioc.h> -#include <linux/types.h> - - -/* - * All values in struct atmtcp_hdr are in network byte order - */ - -struct atmtcp_hdr { - __u16 vpi; - __u16 vci; - __u32 length; /* ... of data part */ -}; - -/* - * All values in struct atmtcp_command are in host byte order - */ - -#define ATMTCP_HDR_MAGIC (~0) /* this length indicates a command */ -#define ATMTCP_CTRL_OPEN 1 /* request/reply */ -#define ATMTCP_CTRL_CLOSE 2 /* request/reply */ - -struct atmtcp_control { - struct atmtcp_hdr hdr; /* must be first */ - int type; /* message type; both directions */ - atm_kptr_t vcc; /* both directions */ - struct sockaddr_atmpvc addr; /* suggested value from kernel */ - struct atm_qos qos; /* both directions */ - int result; /* to kernel only */ -} __ATM_API_ALIGN; - -/* - * Field usage: - * Messge type dir. hdr.v?i type addr qos vcc result - * ----------- ---- ------- ---- ---- --- --- ------ - * OPEN K->D Y Y Y Y Y 0 - * OPEN D->K - Y Y Y Y Y - * CLOSE K->D - - Y - Y 0 - * CLOSE D->K - - - - Y Y - */ - -#define SIOCSIFATMTCP _IO('a',ATMIOC_ITF) /* set ATMTCP mode */ -#define ATMTCP_CREATE _IO('a',ATMIOC_ITF+14) /* create persistent ATMTCP - interface */ -#define ATMTCP_REMOVE _IO('a',ATMIOC_ITF+15) /* destroy persistent ATMTCP - interface */ - - - -#endif /* _UAPILINUX_ATM_TCP_H */ diff --git a/include/uapi/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h deleted file mode 100644 index 5135027b93c1..000000000000 --- a/include/uapi/linux/atm_zatm.h +++ /dev/null @@ -1,47 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by - driver-specific utilities) */ - -/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATM_ZATM_H -#define LINUX_ATM_ZATM_H - -/* - * Note: non-kernel programs including this file must also include - * sys/types.h for struct timeval - */ - -#include <linux/atmapi.h> -#include <linux/atmioc.h> - -#define ZATM_GETPOOL _IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc) - /* get pool statistics */ -#define ZATM_GETPOOLZ _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc) - /* get statistics and zero */ -#define ZATM_SETPOOL _IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc) - /* set pool parameters */ - -struct zatm_pool_info { - int ref_count; /* free buffer pool usage counters */ - int low_water,high_water; /* refill parameters */ - int rqa_count,rqu_count; /* queue condition counters */ - int offset,next_off; /* alignment optimizations: offset */ - int next_cnt,next_thres; /* repetition counter and threshold */ -}; - -struct zatm_pool_req { - int pool_num; /* pool number */ - struct zatm_pool_info info; /* actual information */ -}; - -#define ZATM_OAM_POOL 0 /* free buffer pool for OAM cells */ -#define ZATM_AAL0_POOL 1 /* free buffer pool for AAL0 cells */ -#define ZATM_AAL5_POOL_BASE 2 /* first AAL5 free buffer pool */ -#define ZATM_LAST_POOL ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */ - -#define ZATM_TIMER_HISTORY_SIZE 16 /* number of timer adjustments to - record; must be 2^n */ - -#endif diff --git a/include/uapi/linux/atmarp.h b/include/uapi/linux/atmarp.h deleted file mode 100644 index 8e44d121fde1..000000000000 --- a/include/uapi/linux/atmarp.h +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atmarp.h - ATM ARP protocol and kernel-demon interface definitions */ - -/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef _LINUX_ATMARP_H -#define _LINUX_ATMARP_H - -#include <linux/types.h> -#include <linux/atmapi.h> -#include <linux/atmioc.h> - - -#define ATMARP_RETRY_DELAY 30 /* request next resolution or forget - NAK after 30 sec - should go into - atmclip.h */ -#define ATMARP_MAX_UNRES_PACKETS 5 /* queue that many packets while - waiting for the resolver */ - - -#define ATMARPD_CTRL _IO('a',ATMIOC_CLIP+1) /* become atmarpd ctrl sock */ -#define ATMARP_MKIP _IO('a',ATMIOC_CLIP+2) /* attach socket to IP */ -#define ATMARP_SETENTRY _IO('a',ATMIOC_CLIP+3) /* fill or hide ARP entry */ -#define ATMARP_ENCAP _IO('a',ATMIOC_CLIP+5) /* change encapsulation */ - - -enum atmarp_ctrl_type { - act_invalid, /* catch uninitialized structures */ - act_need, /* need address resolution */ - act_up, /* interface is coming up */ - act_down, /* interface is going down */ - act_change /* interface configuration has changed */ -}; - -struct atmarp_ctrl { - enum atmarp_ctrl_type type; /* message type */ - int itf_num;/* interface number (if present) */ - __be32 ip; /* IP address (act_need only) */ -}; - -#endif diff --git a/include/uapi/linux/atmclip.h b/include/uapi/linux/atmclip.h deleted file mode 100644 index c818bb82b4e6..000000000000 --- a/include/uapi/linux/atmclip.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atmclip.h - Classical IP over ATM */ - -/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATMCLIP_H -#define LINUX_ATMCLIP_H - -#include <linux/sockios.h> -#include <linux/atmioc.h> - - -#define RFC1483LLC_LEN 8 /* LLC+OUI+PID = 8 */ -#define RFC1626_MTU 9180 /* RFC1626 default MTU */ - -#define CLIP_DEFAULT_IDLETIMER 1200 /* 20 minutes, see RFC1755 */ -#define CLIP_CHECK_INTERVAL 10 /* check every ten seconds */ - -#define SIOCMKCLIP _IO('a',ATMIOC_CLIP) /* create IP interface */ - -#endif diff --git a/include/uapi/linux/atmdev.h b/include/uapi/linux/atmdev.h index 20b0215084fc..a94e7b8360ee 100644 --- a/include/uapi/linux/atmdev.h +++ b/include/uapi/linux/atmdev.h @@ -60,14 +60,6 @@ struct atm_dev_stats { /* get interface type name */ #define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc) /* get interface ESI */ -#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc) - /* get itf's local ATM addr. list */ -#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc) - /* reset itf's ATM address list */ -#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc) - /* add a local ATM address */ -#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc) - /* remove a local ATM address */ #define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc) /* get connection identifier range */ #define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc) @@ -76,12 +68,6 @@ struct atm_dev_stats { /* set interface ESI */ #define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc) /* force interface ESI */ -#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc) - /* register a LECS address */ -#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc) - /* unregister a LECS address */ -#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc) - /* retrieve LECS address(es) */ #define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc) /* get AAL layer statistics */ @@ -99,10 +85,6 @@ struct atm_dev_stats { /* set backend handler */ #define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t) /* use backend to make new if */ -#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) - /* add party to p2mp call */ -#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int) - /* drop party from p2mp call */ /* * These are backend handkers that can be set via the ATM_SETBACKEND call diff --git a/include/uapi/linux/atmlec.h b/include/uapi/linux/atmlec.h deleted file mode 100644 index c68346bb40e6..000000000000 --- a/include/uapi/linux/atmlec.h +++ /dev/null @@ -1,92 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * ATM Lan Emulation Daemon driver interface - * - * Marko Kiiskila <mkiiskila@yahoo.com> - */ - -#ifndef _ATMLEC_H_ -#define _ATMLEC_H_ - -#include <linux/atmapi.h> -#include <linux/atmioc.h> -#include <linux/atm.h> -#include <linux/if_ether.h> -#include <linux/types.h> - -/* ATM lec daemon control socket */ -#define ATMLEC_CTRL _IO('a', ATMIOC_LANE) -#define ATMLEC_DATA _IO('a', ATMIOC_LANE+1) -#define ATMLEC_MCAST _IO('a', ATMIOC_LANE+2) - -/* Maximum number of LEC interfaces (tweakable) */ -#define MAX_LEC_ITF 48 - -typedef enum { - l_set_mac_addr, - l_del_mac_addr, - l_svc_setup, - l_addr_delete, - l_topology_change, - l_flush_complete, - l_arp_update, - l_narp_req, /* LANE2 mandates the use of this */ - l_config, - l_flush_tran_id, - l_set_lecid, - l_arp_xmt, - l_rdesc_arp_xmt, - l_associate_req, - l_should_bridge /* should we bridge this MAC? */ -} atmlec_msg_type; - -#define ATMLEC_MSG_TYPE_MAX l_should_bridge - -struct atmlec_config_msg { - unsigned int maximum_unknown_frame_count; - unsigned int max_unknown_frame_time; - unsigned short max_retry_count; - unsigned int aging_time; - unsigned int forward_delay_time; - unsigned int arp_response_time; - unsigned int flush_timeout; - unsigned int path_switching_delay; - unsigned int lane_version; /* LANE2: 1 for LANEv1, 2 for LANEv2 */ - int mtu; - int is_proxy; -}; - -struct atmlec_msg { - atmlec_msg_type type; - int sizeoftlvs; /* LANE2: if != 0, tlvs follow */ - union { - struct { - unsigned char mac_addr[ETH_ALEN]; - unsigned char atm_addr[ATM_ESA_LEN]; - unsigned int flag; /* - * Topology_change flag, - * remoteflag, permanent flag, - * lecid, transaction id - */ - unsigned int targetless_le_arp; /* LANE2 */ - unsigned int no_source_le_narp; /* LANE2 */ - } normal; - struct atmlec_config_msg config; - struct { - __u16 lec_id; /* requestor lec_id */ - __u32 tran_id; /* transaction id */ - unsigned char mac_addr[ETH_ALEN]; /* dst mac addr */ - unsigned char atm_addr[ATM_ESA_LEN]; /* reqestor ATM addr */ - } proxy; /* - * For mapping LE_ARP requests to responses. Filled by - * zeppelin, returned by kernel. Used only when proxying - */ - } content; -} __ATM_API_ALIGN; - -struct atmlec_ioc { - int dev_num; - unsigned char atm_addr[ATM_ESA_LEN]; - unsigned char receive; /* 1= receive vcc, 0 = send vcc */ -}; -#endif /* _ATMLEC_H_ */ diff --git a/include/uapi/linux/atmmpc.h b/include/uapi/linux/atmmpc.h deleted file mode 100644 index cc17f4304839..000000000000 --- a/include/uapi/linux/atmmpc.h +++ /dev/null @@ -1,127 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ATMMPC_H_ -#define _ATMMPC_H_ - -#include <linux/atmapi.h> -#include <linux/atmioc.h> -#include <linux/atm.h> -#include <linux/types.h> - -#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA) -#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1) - -#define MPC_SOCKET_INGRESS 1 -#define MPC_SOCKET_EGRESS 2 - -struct atmmpc_ioc { - int dev_num; - __be32 ipaddr; /* the IP address of the shortcut */ - int type; /* ingress or egress */ -}; - -typedef struct in_ctrl_info { - __u8 Last_NHRP_CIE_code; - __u8 Last_Q2931_cause_value; - __u8 eg_MPC_ATM_addr[ATM_ESA_LEN]; - __be32 tag; - __be32 in_dst_ip; /* IP address this ingress MPC sends packets to */ - __u16 holding_time; - __u32 request_id; -} in_ctrl_info; - -typedef struct eg_ctrl_info { - __u8 DLL_header[256]; - __u8 DH_length; - __be32 cache_id; - __be32 tag; - __be32 mps_ip; - __be32 eg_dst_ip; /* IP address to which ingress MPC sends packets */ - __u8 in_MPC_data_ATM_addr[ATM_ESA_LEN]; - __u16 holding_time; -} eg_ctrl_info; - -struct mpc_parameters { - __u16 mpc_p1; /* Shortcut-Setup Frame Count */ - __u16 mpc_p2; /* Shortcut-Setup Frame Time */ - __u8 mpc_p3[8]; /* Flow-detection Protocols */ - __u16 mpc_p4; /* MPC Initial Retry Time */ - __u16 mpc_p5; /* MPC Retry Time Maximum */ - __u16 mpc_p6; /* Hold Down Time */ -} ; - -struct k_message { - __u16 type; - __be32 ip_mask; - __u8 MPS_ctrl[ATM_ESA_LEN]; - union { - in_ctrl_info in_info; - eg_ctrl_info eg_info; - struct mpc_parameters params; - } content; - struct atm_qos qos; -} __ATM_API_ALIGN; - -struct llc_snap_hdr { - /* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */ - __u8 dsap; /* Destination Service Access Point (0xAA) */ - __u8 ssap; /* Source Service Access Point (0xAA) */ - __u8 ui; /* Unnumbered Information (0x03) */ - __u8 org[3]; /* Organizational identification (0x000000) */ - __u8 type[2]; /* Ether type (for IP) (0x0800) */ -}; - -/* TLVs this MPC recognizes */ -#define TLV_MPOA_DEVICE_TYPE 0x00a03e2a - -/* MPOA device types in MPOA Device Type TLV */ -#define NON_MPOA 0 -#define MPS 1 -#define MPC 2 -#define MPS_AND_MPC 3 - - -/* MPC parameter defaults */ - -#define MPC_P1 10 /* Shortcut-Setup Frame Count */ -#define MPC_P2 1 /* Shortcut-Setup Frame Time */ -#define MPC_P3 0 /* Flow-detection Protocols */ -#define MPC_P4 5 /* MPC Initial Retry Time */ -#define MPC_P5 40 /* MPC Retry Time Maximum */ -#define MPC_P6 160 /* Hold Down Time */ -#define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */ - -/* MPC constants */ - -#define MPC_C1 2 /* Retry Time Multiplier */ -#define MPC_C2 60 /* Initial Keep-Alive Lifetime */ - -/* Message types - to MPOA daemon */ - -#define SND_MPOA_RES_RQST 201 -#define SET_MPS_CTRL_ADDR 202 -#define SND_MPOA_RES_RTRY 203 /* Different type in a retry due to req id */ -#define STOP_KEEP_ALIVE_SM 204 -#define EGRESS_ENTRY_REMOVED 205 -#define SND_EGRESS_PURGE 206 -#define DIE 207 /* tell the daemon to exit() */ -#define DATA_PLANE_PURGE 208 /* Data plane purge because of egress cache hit miss or dead MPS */ -#define OPEN_INGRESS_SVC 209 - -/* Message types - from MPOA daemon */ - -#define MPOA_TRIGGER_RCVD 101 -#define MPOA_RES_REPLY_RCVD 102 -#define INGRESS_PURGE_RCVD 103 -#define EGRESS_PURGE_RCVD 104 -#define MPS_DEATH 105 -#define CACHE_IMPOS_RCVD 106 -#define SET_MPC_CTRL_ADDR 107 /* Our MPC's control ATM address */ -#define SET_MPS_MAC_ADDR 108 -#define CLEAN_UP_AND_EXIT 109 -#define SET_MPC_PARAMS 110 /* MPC configuration parameters */ - -/* Message types - bidirectional */ - -#define RELOAD 301 /* kill -HUP the daemon for reload */ - -#endif /* _ATMMPC_H_ */ diff --git a/include/uapi/linux/atmsvc.h b/include/uapi/linux/atmsvc.h deleted file mode 100644 index 137b5f853449..000000000000 --- a/include/uapi/linux/atmsvc.h +++ /dev/null @@ -1,56 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* atmsvc.h - ATM signaling kernel-demon interface definitions */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef _LINUX_ATMSVC_H -#define _LINUX_ATMSVC_H - -#include <linux/atmapi.h> -#include <linux/atm.h> -#include <linux/atmioc.h> - - -#define ATMSIGD_CTRL _IO('a',ATMIOC_SPECIAL) - /* become ATM signaling demon control socket */ - -enum atmsvc_msg_type { as_catch_null, as_bind, as_connect, as_accept, as_reject, - as_listen, as_okay, as_error, as_indicate, as_close, - as_itf_notify, as_modify, as_identify, as_terminate, - as_addparty, as_dropparty }; - -struct atmsvc_msg { - enum atmsvc_msg_type type; - atm_kptr_t vcc; - atm_kptr_t listen_vcc; /* indicate */ - int reply; /* for okay and close: */ - /* < 0: error before active */ - /* (sigd has discarded ctx) */ - /* ==0: success */ - /* > 0: error when active (still */ - /* need to close) */ - struct sockaddr_atmpvc pvc; /* indicate, okay (connect) */ - struct sockaddr_atmsvc local; /* local SVC address */ - struct atm_qos qos; /* QOS parameters */ - struct atm_sap sap; /* SAP */ - unsigned int session; /* for p2pm */ - struct sockaddr_atmsvc svc; /* SVC address */ -} __ATM_API_ALIGN; - -/* - * Message contents: see ftp://icaftp.epfl.ch/pub/linux/atm/docs/isp-*.tar.gz - */ - -/* - * Some policy stuff for atmsigd and for net/atm/svc.c. Both have to agree on - * what PCR is used to request bandwidth from the device driver. net/atm/svc.c - * tries to do better than that, but only if there's no routing decision (i.e. - * if signaling only uses one ATM interface). - */ - -#define SELECT_TOP_PCR(tp) ((tp).pcr ? (tp).pcr : \ - (tp).max_pcr && (tp).max_pcr != ATM_MAX_PCR ? (tp).max_pcr : \ - (tp).min_pcr ? (tp).min_pcr : ATM_MAX_PCR) - -#endif diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h index 439132a819ea..1241285b866c 100644 --- a/include/uapi/linux/batadv_packet.h +++ b/include/uapi/linux/batadv_packet.h @@ -518,16 +518,16 @@ struct batadv_mcast_packet { * @packet_type: batman-adv packet type, part of the general header * @version: batman-adv protocol version, part of the general header * @ttl: time to live for this packet, part of the general header + * @first_ttvn: tt-version number of first included packet * @first_source: original source of first included packet * @first_orig_dest: original destination of first included packet * @first_crc: checksum of first included packet - * @first_ttvn: tt-version number of first included packet * @second_ttl: ttl of second packet + * @second_ttvn: tt version number of second included packet * @second_dest: second receiver of this coded packet * @second_source: original source of second included packet * @second_orig_dest: original destination of second included packet * @second_crc: checksum of second included packet - * @second_ttvn: tt version number of second included packet * @coded_len: length of network coded part of the payload */ struct batadv_coded_packet { @@ -554,8 +554,8 @@ struct batadv_coded_packet { * @version: batman-adv protocol version, part of the general header * @ttl: time to live for this packet, part of the general header * @reserved: reserved field (for packet alignment) - * @src: address of the source * @dst: address of the destination + * @src: address of the source * @tvlv_len: length of tvlv data following the unicast tvlv header * @align: 2 bytes to align the header to a 4 byte boundary */ diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index 0b165eac7619..ca713bcc47b9 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -406,6 +406,7 @@ enum devlink_var_attr_type { DEVLINK_VAR_ATTR_TYPE_BINARY, __DEVLINK_VAR_ATTR_TYPE_CUSTOM_BASE = 0x80, /* Any possible custom types, unrelated to NLA_* values go below */ + DEVLINK_VAR_ATTR_TYPE_U64_ARRAY, }; enum devlink_attr { diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h index 871685f7c353..55eaa82f5f98 100644 --- a/include/uapi/linux/dpll.h +++ b/include/uapi/linux/dpll.h @@ -109,10 +109,12 @@ enum dpll_clock_quality_level { * enum dpll_type - type of dpll, valid values for DPLL_A_TYPE attribute * @DPLL_TYPE_PPS: dpll produces Pulse-Per-Second signal * @DPLL_TYPE_EEC: dpll drives the Ethernet Equipment Clock + * @DPLL_TYPE_GENERIC: generic dpll type for devices outside PPS/EEC classes */ enum dpll_type { DPLL_TYPE_PPS = 1, DPLL_TYPE_EEC, + DPLL_TYPE_GENERIC, /* private: */ __DPLL_TYPE_MAX, @@ -179,6 +181,28 @@ enum dpll_pin_state { }; /** + * enum dpll_pin_operstate - defines possible operational states of a pin with + * respect to its parent DPLL device, valid values for DPLL_A_PIN_OPERSTATE + * attribute + * @DPLL_PIN_OPERSTATE_ACTIVE: pin is qualified and actively used by the DPLL + * @DPLL_PIN_OPERSTATE_STANDBY: pin is qualified but not actively used by the + * DPLL + * @DPLL_PIN_OPERSTATE_NO_SIGNAL: pin does not have a valid signal + * @DPLL_PIN_OPERSTATE_QUAL_FAILED: pin signal failed qualification (e.g. + * frequency or phase monitor) + */ +enum dpll_pin_operstate { + DPLL_PIN_OPERSTATE_ACTIVE = 1, + DPLL_PIN_OPERSTATE_STANDBY, + DPLL_PIN_OPERSTATE_NO_SIGNAL, + DPLL_PIN_OPERSTATE_QUAL_FAILED, + + /* private: */ + __DPLL_PIN_OPERSTATE_MAX, + DPLL_PIN_OPERSTATE_MAX = (__DPLL_PIN_OPERSTATE_MAX - 1) +}; + +/** * enum dpll_pin_capabilities - defines possible capabilities of a pin, valid * flags on DPLL_A_PIN_CAPABILITIES attribute * @DPLL_PIN_CAPABILITIES_DIRECTION_CAN_CHANGE: pin direction can be changed @@ -257,6 +281,7 @@ enum dpll_a_pin { DPLL_A_PIN_PHASE_ADJUST_GRAN, DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET_PPT, DPLL_A_PIN_MEASURED_FREQUENCY, + DPLL_A_PIN_OPERSTATE, __DPLL_A_PIN_MAX, DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1) diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 1cdfb8341df2..a2091d4e00f3 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -291,6 +291,9 @@ enum phy_tunable_id { ETHTOOL_PHY_DOWNSHIFT, ETHTOOL_PHY_FAST_LINK_DOWN, ETHTOOL_PHY_EDPD, + ETHTOOL_PHY_SHORT_CABLE_PRESET, + ETHTOOL_PHY_LPF_BW, + ETHTOOL_PHY_DSP_EQ_INIT_VALUE, /* * Add your fresh new phy tunable attribute above and remember to update * phy_tunable_strings[] in net/ethtool/common.c diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index e52f8207ab27..21a700c02ef7 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -526,6 +526,7 @@ enum { BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS, BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS, BRIDGE_VLANDB_ENTRY_NEIGH_SUPPRESS, + BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT, __BRIDGE_VLANDB_ENTRY_MAX, }; #define BRIDGE_VLANDB_ENTRY_MAX (__BRIDGE_VLANDB_ENTRY_MAX - 1) diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index df9d44a11540..1ffac52c39df 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -82,6 +82,7 @@ #define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ #define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ #define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ +#define ETH_P_8021AC 0x8870 /* 802.1AC LLC > 1500 bytes */ #define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport * over Ethernet */ @@ -123,6 +124,7 @@ #define ETH_P_DSA_A5PSW 0xE001 /* A5PSW Tag Value [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_NXP_NETC 0xFD3A /* NXP NETC DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is more than this value * then the frame is Ethernet II. Else it is 802.3 */ @@ -163,6 +165,10 @@ #define ETH_P_MCTP 0x00FA /* Management component transport * protocol packets */ +#define ETH_P_GRE_OSI 0x00FE /* GRE tunnels: LLC "fe fe 03" analog, + * used primarily for IS-IS over GRE + * WARNING: not internal, used on wire! + */ /* * This is an Ethernet frame header. diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 79ce4bc24cba..43cecca49f01 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -1085,6 +1085,22 @@ enum { * Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS* * is enabled for a given port. * + * @IFLA_BRPORT_NEIGH_FORWARD_GRAT + * Controls whether gratuitous ARP packets and unsolicited Neighbor + * Advertisement packets are forwarded on a given port even when neighbor + * suppression is enabled. + * By default this flag is off, meaning gratuitous ARP and unsolicited NA + * packets will be suppressed when neighbor suppression is enabled. + * Setting this flag to on allows these packets to be forwarded even + * when *IFLA_BRPORT_NEIGH_SUPPRESS* or *IFLA_BRPORT_NEIGH_VLAN_SUPPRESS* + * is enabled. + * + * Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS* + * or *IFLA_BRPORT_NEIGH_VLAN_SUPPRESS* is enabled for a given port. + * When *IFLA_BRPORT_NEIGH_VLAN_SUPPRESS* is set, this port-level flag is + * ignored and per-VLAN control is available via + * *BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT*. + * * @IFLA_BRPORT_BACKUP_NHID * The FDB nexthop object ID to attach to packets being redirected to a * backup port that has VLAN tunnel mapping enabled (via the @@ -1137,6 +1153,7 @@ enum { IFLA_BRPORT_MCAST_MAX_GROUPS, IFLA_BRPORT_NEIGH_VLAN_SUPPRESS, IFLA_BRPORT_BACKUP_NHID, + IFLA_BRPORT_NEIGH_FORWARD_GRAT, __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) @@ -1489,6 +1506,8 @@ enum { IFLA_GENEVE_INNER_PROTO_INHERIT, IFLA_GENEVE_PORT_RANGE, IFLA_GENEVE_GRO_HINT, + IFLA_GENEVE_LOCAL, + IFLA_GENEVE_LOCAL6, __IFLA_GENEVE_MAX }; #define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1) @@ -1584,6 +1603,7 @@ enum { IFLA_BOND_NS_IP6_TARGET, IFLA_BOND_COUPLED_CONTROL, IFLA_BOND_BROADCAST_NEIGH, + IFLA_BOND_LACP_STRICT, __IFLA_BOND_MAX, }; diff --git a/include/uapi/linux/llc.h b/include/uapi/linux/llc.h index cf8806b14d5f..2ffd81f9cc01 100644 --- a/include/uapi/linux/llc.h +++ b/include/uapi/linux/llc.h @@ -3,13 +3,6 @@ * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators. * * Copyright (c) 2001 by Jay Schulist <jschlst@samba.org> - * - * This program can be redistributed or modified under the terms of the - * GNU General Public License as published by the Free Software Foundation. - * This program is distributed without any warranty or implied warranty - * of merchantability or fitness for a particular purpose. - * - * See the GNU General Public License for more details. */ #ifndef _UAPI__LINUX_LLC_H #define _UAPI__LINUX_LLC_H diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h index 8d769f100de6..b2541c948fc1 100644 --- a/include/uapi/linux/mdio.h +++ b/include/uapi/linux/mdio.h @@ -23,6 +23,10 @@ #define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ #define MDIO_MMD_TC 6 /* Transmission Convergence */ #define MDIO_MMD_AN 7 /* Auto-Negotiation */ +#define MDIO_MMD_SEP_PMA1 8 /* Separated PMA (1) */ +#define MDIO_MMD_SEP_PMA2 9 /* Separated PMA (2) */ +#define MDIO_MMD_SEP_PMA3 10 /* Separated PMA (3) */ +#define MDIO_MMD_SEP_PMA4 11 /* Separated PMA (4) */ #define MDIO_MMD_POWER_UNIT 13 /* PHY Power Unit */ #define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ #define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ @@ -63,6 +67,8 @@ * Lanes B-D are numbered 134-136. */ #define MDIO_PMA_10GBR_FSRT_CSR 147 /* 10GBASE-R fast retrain status and control */ #define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ +#define MDIO_PMA_RSFEC_CTRL 200 /* RSFEC control */ +#define MDIO_PMA_RSFEC_LANE_MAP 206 /* RSFEC lane mapping */ #define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ #define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ @@ -175,6 +181,10 @@ #define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) #define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) #define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) +#define MDIO_DEVS_SEP_PMA1 MDIO_DEVS_PRESENT(MDIO_MMD_SEP_PMA1) +#define MDIO_DEVS_SEP_PMA2 MDIO_DEVS_PRESENT(MDIO_MMD_SEP_PMA2) +#define MDIO_DEVS_SEP_PMA3 MDIO_DEVS_PRESENT(MDIO_MMD_SEP_PMA3) +#define MDIO_DEVS_SEP_PMA4 MDIO_DEVS_PRESENT(MDIO_MMD_SEP_PMA4) #define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) #define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1) #define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2) diff --git a/include/uapi/linux/netdev.h b/include/uapi/linux/netdev.h index 7df1056a35fd..2f3ab75e8cc0 100644 --- a/include/uapi/linux/netdev.h +++ b/include/uapi/linux/netdev.h @@ -97,6 +97,8 @@ enum { }; enum { + NETDEV_A_IO_URING_PROVIDER_INFO_RX_BUF_LEN = 1, + __NETDEV_A_IO_URING_PROVIDER_INFO_MAX, NETDEV_A_IO_URING_PROVIDER_INFO_MAX = (__NETDEV_A_IO_URING_PROVIDER_INFO_MAX - 1) }; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 3d55bf4be36f..9998f6c0a665 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -729,7 +729,9 @@ * to remain on the channel. This command is also used as an event to * notify when the requested duration starts (it may take a while for the * driver to schedule this time due to other concurrent needs for the - * radio). + * radio). An optional attribute %NL80211_ATTR_MAC can be used to filter + * incoming frames during remain-on-channel, such that frames + * addressed to the specified destination MAC are reported. * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) * that will be included with any events pertaining to this request; * the cookie is also used to cancel the request. @@ -1204,10 +1206,12 @@ * user space through the connect result as the user space would have * initiated the connection through the connect request. * - * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's - * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, - * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its - * address(specified in %NL80211_ATTR_MAC). + * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notifies that a station's + * HT opmode or VHT opmode changed using any of %NL80211_ATTR_SMPS_MODE, + * %NL80211_ATTR_CHANNEL_WIDTH, %NL80211_ATTR_NSS attributes with its + * address (specified in %NL80211_ATTR_MAC). + * Note that 80+80 and 160 MHz might not be differentiated, i.e. may + * report %NL80211_CHAN_WIDTH_160 instead of %NL80211_CHAN_WIDTH_80P80. * * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. @@ -1415,6 +1419,12 @@ * identifying the evacuated channel. * User space may reconfigure the local schedule in response to this * notification. + * @NL80211_CMD_START_PD: Start PD operation, identified by its + * %NL80211_ATTR_WDEV interface. This interface must have been previously + * created with %NL80211_CMD_NEW_INTERFACE. + * @NL80211_CMD_STOP_PD: Stop the PD operation, identified by + * its %NL80211_ATTR_WDEV interface. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1690,6 +1700,9 @@ enum nl80211_commands { NL80211_CMD_NAN_CHANNEL_EVAC, + NL80211_CMD_START_PD, + NL80211_CMD_STOP_PD, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2991,11 +3004,13 @@ enum nl80211_commands { * @NL80211_ATTR_EPCS: Flag attribute indicating that EPCS is enabled for a * station interface. * - * @NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS: Extended MLD capabilities and - * operations that userspace implements to use during association/ML - * link reconfig, currently only "BTM MLD Recommendation For Multiple - * APs Support". Drivers may set additional flags that they support - * in the kernel or device. + * @NL80211_ATTR_EXT_MLD_CAPA_AND_OPS: Extended MLD capabilities and operations. + * For association and link reconfiguration, indicates extra capabilities + * that userspace implements, currently only "BTM MLD Recommendation For + * Multiple APs Support". + * For wiphy information, additional flags that drivers will set, but + * this is informational only for userspace (it's not expected to set + * these.) * * @NL80211_ATTR_WIPHY_RADIO_INDEX: (int) Integer attribute denoting the index * of the radio in interest. Internally a value of -1 is used to @@ -3140,6 +3155,16 @@ enum nl80211_commands { * association response etc., since it's abridged in the beacon. Used * for START_AP etc. * + * @NL80211_ATTR_ASSOC_ENCRYPTED: Flag attribute, used only with the + * %NL80211_CMD_CONNECT event in SME-in-driver mode. The driver should + * set this flag to indicate that both the (Re)Association Request frame + * and the corresponding (Re)Association Response frame are transmitted + * encrypted over the air. Enhanced Privacy Protection (EPP), as defined + * in IEEE P802.11bi/D4.0, mandates this encryption. + * + * @NL80211_ATTR_NPCA_PRIMARY_FREQ: NPCA primary channel (u32) + * @NL80211_ATTR_NPCA_PUNCT_BITMAP: NPCA puncturing bitmap (u32) + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3695,7 +3720,7 @@ enum nl80211_attrs { NL80211_ATTR_MLO_RECONF_REM_LINKS, NL80211_ATTR_EPCS, - NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS, + NL80211_ATTR_EXT_MLD_CAPA_AND_OPS, NL80211_ATTR_WIPHY_RADIO_INDEX, @@ -3733,6 +3758,11 @@ enum nl80211_attrs { NL80211_ATTR_NAN_MAX_CHAN_SWITCH_TIME, NL80211_ATTR_NAN_PEER_MAPS, + NL80211_ATTR_ASSOC_ENCRYPTED, + + NL80211_ATTR_NPCA_PRIMARY_FREQ, + NL80211_ATTR_NPCA_PUNCT_BITMAP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3747,6 +3777,7 @@ enum nl80211_attrs { #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA #define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON #define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP +#define NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS NL80211_ATTR_EXT_MLD_CAPA_AND_OPS /* * Allow user space programs to use #ifdef on new attributes by defining them @@ -3829,6 +3860,7 @@ enum nl80211_attrs { * @NL80211_IFTYPE_NAN_DATA: NAN data interface type (netdev); NAN data * interfaces can only be brought up (IFF_UP) when a NAN interface * already exists and NAN has been started (using %NL80211_CMD_START_NAN). + * @NL80211_IFTYPE_PD: PD device interface type (not a netdev) * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * @@ -3851,6 +3883,7 @@ enum nl80211_iftype { NL80211_IFTYPE_OCB, NL80211_IFTYPE_NAN, NL80211_IFTYPE_NAN_DATA, + NL80211_IFTYPE_PD, /* keep last */ NUM_NL80211_IFTYPES, @@ -5790,6 +5823,18 @@ enum nl80211_key_default_types { * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. * Defaults to @NL80211_KEY_RX_TX. * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key + * @NL80211_KEY_LTF_SEED: LTF key seed is used by the driver to generate + * secure LTF keys used in case of peer measurement request with FTM + * request type as either %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED + * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED. Secure LTF key seeds + * will help enable PHY security in peer measurement session. + * The LTF key seed is installed along with the TK (Temporal Key) using + * %NL80211_CMD_NEW_KEY. The TK is configured using the + * %NL80211_ATTR_KEY_DATA attribute, while the LTF key seed is configured + * using this attribute. Both keys must be configured before initiation + * of peer measurement to ensure peer measurement session is secure. + * Only valid if %NL80211_EXT_FEATURE_SET_KEY_LTF_SEED is set. This + * attribute is restricted to pairwise keys (%NL80211_KEYTYPE_PAIRWISE). * * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute @@ -5806,6 +5851,7 @@ enum nl80211_key_attributes { NL80211_KEY_DEFAULT_TYPES, NL80211_KEY_MODE, NL80211_KEY_DEFAULT_BEACON, + NL80211_KEY_LTF_SEED, /* keep last */ __NL80211_KEY_AFTER_LAST, @@ -7029,6 +7075,16 @@ enum nl80211_feature_flags { * (NL80211_CMD_AUTHENTICATE) in non-AP STA mode, as specified in * "IEEE P802.11bi/D4.0, 12.16.5". * + * @NL80211_EXT_FEATURE_ROC_ADDR_FILTER: Driver supports MAC address + * filtering during remain-on-channel. When %NL80211_ATTR_MAC is + * provided with %NL80211_CMD_REMAIN_ON_CHANNEL, the driver will + * forward frames with a matching MAC address to userspace during + * the off-channel period. + * + * @NL80211_EXT_FEATURE_SET_KEY_LTF_SEED: Driver supports installing the + * LTF key seed via %NL80211_KEY_LTF_SEED. The seed is used to generate + * secure LTF keys for secure LTF measurement sessions. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -7108,6 +7164,8 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_EPPKE, NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION, NL80211_EXT_FEATURE_IEEE8021X_AUTH, + NL80211_EXT_FEATURE_ROC_ADDR_FILTER, + NL80211_EXT_FEATURE_SET_KEY_LTF_SEED, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -7961,6 +8019,26 @@ enum nl80211_peer_measurement_resp { }; /** + * enum nl80211_peer_measurement_ftm_req_type - FTM ranging request type, + * used with %NL80211_PMSR_PEER_ATTR_REQ_TYPE + * + * @NL80211_PMSR_FTM_REQ_TYPE_INFRA: infrastructure ranging, i.e. STA-to-AP + * @NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging as defined in the + * Wi-Fi Alliance specification "Proximity Ranging (PR) Implementation + * Consideration Draft 1.9 Rev 1" + * @NUM_NL80211_PMSR_FTM_REQ_TYPE: internal + * @NL80211_PMSR_FTM_REQ_TYPE_MAX: highest request type value + */ +enum nl80211_peer_measurement_ftm_req_type { + NL80211_PMSR_FTM_REQ_TYPE_INFRA, + NL80211_PMSR_FTM_REQ_TYPE_PD, + + /* keep last */ + NUM_NL80211_PMSR_FTM_REQ_TYPE, + NL80211_PMSR_FTM_REQ_TYPE_MAX = NUM_NL80211_PMSR_FTM_REQ_TYPE - 1 +}; + +/** * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid * @@ -7973,6 +8051,9 @@ enum nl80211_peer_measurement_resp { * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by * measurement type, with attributes from the * &enum nl80211_peer_measurement_resp inside. + * @NL80211_PMSR_PEER_ATTR_REQ_TYPE: u32 attribute specifying the ranging + * request type, using values from &enum nl80211_peer_measurement_ftm_req_type. + * If absent, defaults to %NL80211_PMSR_FTM_REQ_TYPE_INFRA. * * @NUM_NL80211_PMSR_PEER_ATTRS: internal * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number @@ -7984,6 +8065,7 @@ enum nl80211_peer_measurement_peer_attrs { NL80211_PMSR_PEER_ATTR_CHAN, NL80211_PMSR_PEER_ATTR_REQ, NL80211_PMSR_PEER_ATTR_RESP, + NL80211_PMSR_PEER_ATTR_REQ_TYPE, /* keep last */ NUM_NL80211_PMSR_PEER_ATTRS, @@ -8010,6 +8092,18 @@ enum nl80211_peer_measurement_peer_attrs { * meaningless, just a list of peers to measure with, with the * sub-attributes taken from * &enum nl80211_peer_measurement_peer_attrs. + * @NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE: u32 attribute indicating the + * maximum number of peers supported when the device operates in the + * ISTA (Initiator STA) role. If absent, no role-specific peer limit + * applies. The sum of %NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE and + * %NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE is enforced when the device + * supports concurrent ISTA/RSTA operation. + * @NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE: u32 attribute indicating the + * maximum number of peers supported when the device operates in the + * RSTA (Responder STA) role. If absent, no role-specific peer limit + * applies. The sum of %NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE and + * %NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE is enforced when the device + * supports concurrent ISTA/RSTA operation. * * @NUM_NL80211_PMSR_ATTR: internal * @NL80211_PMSR_ATTR_MAX: highest attribute number @@ -8022,6 +8116,8 @@ enum nl80211_peer_measurement_attrs { NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, NL80211_PMSR_ATTR_TYPE_CAPA, NL80211_PMSR_ATTR_PEERS, + NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE, + NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE, /* keep last */ NUM_NL80211_PMSR_ATTR, @@ -8080,6 +8176,54 @@ enum nl80211_peer_measurement_attrs { * This limits the allowed combinations of LTF repetitions and STS. * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT: flag attribute indicating the * device supports operating as the RSTA in PMSR FTM request + * @NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS: nested attribute containing ISTA + * (initiator) role capabilities. Uses the same sub-attributes as + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS. + * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS: nested attribute containing RSTA + * (responder) role capabilities. + * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_NTB: flag attribute (used inside + * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating NTB ranging support. + * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_TB: flag attribute (used inside + * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating TB ranging support. + * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_EDCA: flag attribute (used inside + * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating EDCA based ranging + * support. + * @NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS: nested attribute containing ranging + * type capabilities. Uses sub-attributes from + * &enum nl80211_peer_measurement_ftm_type_capa. + * @NL80211_PMSR_FTM_CAPA_ATTR_CONCURRENT_ISTA_RSTA_SUPPORT: flag attribute + * indicating that the device can simultaneously act as initiator and + * responder in a multi-peer measurement request. Only valid if + * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT is set. + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_TX_ANTENNAS: u32 attribute indicating + * the maximum number of transmit antennas supported for EDCA based ranging + * (0 means unknown) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_RX_ANTENNAS: u32 attribute indicating + * the maximum number of receive antennas supported for EDCA based ranging + * (0 means unknown) + * @NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_EDCA: u32 attribute indicating + * the minimum EDCA ranging interval supported by the device + * in milli seconds. (0 means unknown). Applications can use this value + * to estimate the burst period to be given in the FTM request for the + * EDCA based ranging case. If non-zero, this value will be used to + * validate the burst period in the FTM request. + * @NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_NTB: u32 attribute indicating + * the minimum NTB ranging interval supported by the device + * in milli seconds. (0 means unknown). Applications can use this value + * to estimate the burst period to be given in the FTM request for the + * NTB ranging case. If non-zero, this value will be used to validate + * the nominal time in the FTM request. + * @NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES: u32 bitmap of values from + * &enum nl80211_preamble indicating the supported preambles for PD + * ranging requests. Only valid if %NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT + * is set. + * @NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS: u32 bitmap of values from + * &enum nl80211_chan_width indicating the supported channel bandwidths + * for PD ranging requests. Only valid if + * %NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT is set. * * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number @@ -8105,6 +8249,19 @@ enum nl80211_peer_measurement_ftm_capa { NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX, NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX, NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT, + NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS, + NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS, + NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_NTB, + NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_TB, + NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_EDCA, + NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS, + NL80211_PMSR_FTM_CAPA_ATTR_CONCURRENT_ISTA_RSTA_SUPPORT, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_TX_ANTENNAS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_RX_ANTENNAS, + NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_EDCA, + NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_NTB, + NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES, + NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, /* keep last */ NUM_NL80211_PMSR_FTM_CAPA_ATTR, @@ -8112,6 +8269,33 @@ enum nl80211_peer_measurement_ftm_capa { }; /** + * enum nl80211_peer_measurement_ftm_type_capa - FTM ranging type capability + * sub-attributes, used inside %NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS + * @__NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT: flag attribute indicating + * that the device supports infrastructure ranging (STA-to-AP or + * AP-to-STA) as part of Proximity Detection + * @NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT: flag attribute indicating that + * the device supports peer-to-peer ranging as mentioned in the + * specification "PR Implementation Consideration Draft 1.9 rev 1" where + * PD stands for proximity detection + * + * @NUM_NL80211_PMSR_FTM_TYPE_CAPA_ATTR: internal + * @NL80211_PMSR_FTM_TYPE_CAPA_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_type_capa { + __NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INVALID, + + NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT, + NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT, + + /* keep last */ + NUM_NL80211_PMSR_FTM_TYPE_CAPA_ATTR, + NL80211_PMSR_FTM_TYPE_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_TYPE_CAPA_ATTR - 1 +}; + +/** * enum nl80211_peer_measurement_ftm_req - FTM request attributes * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid * @@ -8129,9 +8313,11 @@ enum nl80211_peer_measurement_ftm_capa { * default 15 i.e. "no preference"). For non-EDCA ranging, this is the * burst duration in milliseconds (optional with default 0, i.e. let the * device decide). - * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames - * requested per burst + * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: (Optional) number of successful + * FTM frames requested per burst * (u8, 0-31, optional with default 0 i.e. "no preference") + * If the attribute is absent ("no preference"), the driver or firmware can + * choose a suitable value. * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries * (u8, default 3) * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) @@ -8165,6 +8351,50 @@ enum nl80211_peer_measurement_ftm_capa { * Only valid if %NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK is set (so the * RSTA will have the measurement results to report back in the FTM * response). + * @NL80211_PMSR_FTM_REQ_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS: minimum time + * between two consecutive range measurements in units of 100 microseconds, + * for non-trigger based ranging (u32). Should be set as short as possible + * to minimize turnaround time, since two-way ranging with delayed LMR + * requires two measurements. Only valid if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS: maximum time + * between two consecutive range measurements in units of 10 milliseconds, + * for non-trigger based ranging (u32). Acts as a session timeout; if + * exceeded, the ranging session should be terminated. Only valid if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_NOMINAL_TIME: The nominal time field shall be + * set to the nominal duration between adjacent Availability Windows in + * units of milli seconds (u32). Mandatory if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_AW_DURATION: (Optional) The AW duration field + * shall be set to the duration of the AW in units of 1ms (0-255 ms) (u32). + * Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * If the attribute is absent ("no preference"), the driver or firmware + * can choose a suitable value. + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_MEASUREMENTS: (Optional) number of + * Availability Windows (AWs) to schedule for non-trigger-based ranging. + * Each AW may contain multiple FTM exchanges as configured by + * %NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST. Only valid if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * If the attribute is absent ("no preference"), the driver or firmware + * can choose a suitable value. + * @NL80211_PMSR_FTM_REQ_ATTR_PAD: ignore, for u64/s64 padding only. + * @NL80211_PMSR_FTM_REQ_ATTR_INGRESS: optional u64 attribute in units of mm. + * When specified, the measurement result of the peer needs to be + * indicated if the device moves into this range. + * @NL80211_PMSR_FTM_REQ_ATTR_EGRESS: optional u64 attribute in units of mm. + * When specified, the measurement result of the peer needs to be + * indicated if the device moves out of this range. + * If neither or only one of @NL80211_PMSR_FTM_REQ_ATTR_INGRESS and + * @NL80211_PMSR_FTM_REQ_ATTR_EGRESS is specified, only the specified + * threshold is used. If both are specified, both thresholds are applied. + * If neither is specified, results are reported without threshold + * filtering. + * @NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS: Flag to suppress ranging + * results for PD requests. When set, ranging measurements are performed + * but results are not reported to userspace, regardless of ranging role + * or type. Only valid when %NL80211_PMSR_PEER_ATTR_REQ_TYPE is set to + * %NL80211_PMSR_FTM_REQ_TYPE_PD. * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number @@ -8186,6 +8416,15 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, NL80211_PMSR_FTM_REQ_ATTR_RSTA, + NL80211_PMSR_FTM_REQ_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_REQ_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_REQ_ATTR_NOMINAL_TIME, + NL80211_PMSR_FTM_REQ_ATTR_AW_DURATION, + NL80211_PMSR_FTM_REQ_ATTR_NUM_MEASUREMENTS, + NL80211_PMSR_FTM_REQ_ATTR_PAD, + NL80211_PMSR_FTM_REQ_ATTR_INGRESS, + NL80211_PMSR_FTM_REQ_ATTR_EGRESS, + NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS, /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, @@ -8272,6 +8511,33 @@ enum nl80211_peer_measurement_ftm_failure_reasons { * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only * @NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD: actual burst period used by * the responder (similar to request, u16) + * @NL80211_PMSR_FTM_RESP_ATTR_TX_LTF_REPETITION_COUNT: negotiated value of + * number of tx ltf repetitions in NDP frames (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_RX_LTF_REPETITION_COUNT: negotiated value of + * number of rx ltf repetitions in NDP frames (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS: negotiated value + * where latest time by which the ISTA needs to complete the next round of + * measurements, in units of 10 ms (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS: negotiated + * minimum time between two consecutive range measurements initiated by an + * ISTA, in units of 100 us (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_TX_SPATIAL_STREAMS: number of Tx space-time + * streams used in NDP frames during the measurement sounding phase + * (u32, optional). + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_RX_SPATIAL_STREAMS: number of Rx space-time + * streams used in the NDP frames during the measurement sounding phase + * (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_NOMINAL_TIME: negotiated nominal time used in + * this session in milliseconds. (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_AVAILABILITY_WINDOW: negotiated availability + * window time used in this session, in units of milli seconds. + * (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_CHANNEL_WIDTH: u32 attribute indicating channel + * width used for measurement, see &enum nl80211_chan_width (optional). + * @NL80211_PMSR_FTM_RESP_ATTR_PREAMBLE: u32 attribute indicating the preamble + * type used for the measurement, see &enum nl80211_preamble (optional). + * @NL80211_PMSR_FTM_RESP_ATTR_IS_DELAYED_LMR: flag, indicates if the + * current result is delayed LMR data. * * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number @@ -8301,6 +8567,17 @@ enum nl80211_peer_measurement_ftm_resp { NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, NL80211_PMSR_FTM_RESP_ATTR_PAD, NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD, + NL80211_PMSR_FTM_RESP_ATTR_TX_LTF_REPETITION_COUNT, + NL80211_PMSR_FTM_RESP_ATTR_RX_LTF_REPETITION_COUNT, + NL80211_PMSR_FTM_RESP_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_RESP_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_RESP_ATTR_NUM_TX_SPATIAL_STREAMS, + NL80211_PMSR_FTM_RESP_ATTR_NUM_RX_SPATIAL_STREAMS, + NL80211_PMSR_FTM_RESP_ATTR_NOMINAL_TIME, + NL80211_PMSR_FTM_RESP_ATTR_AVAILABILITY_WINDOW, + NL80211_PMSR_FTM_RESP_ATTR_CHANNEL_WIDTH, + NL80211_PMSR_FTM_RESP_ATTR_PREAMBLE, + NL80211_PMSR_FTM_RESP_ATTR_IS_DELAYED_LMR, /* keep last */ NUM_NL80211_PMSR_FTM_RESP_ATTR, diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h index 66e8072f44df..490efd288526 100644 --- a/include/uapi/linux/pkt_sched.h +++ b/include/uapi/linux/pkt_sched.h @@ -569,6 +569,16 @@ struct tc_netem_gemodel { #define NETEM_DIST_SCALE 8192 #define NETEM_DIST_MAX 16384 +struct tc_netem_xstats { + __u64 delayed; /* packets delayed */ + __u64 dropped; /* packets dropped by loss model */ + __u64 corrupted; /* packets with bit errors injected */ + __u64 duplicated; /* duplicate packets generated */ + __u64 reordered; /* packets sent out of order */ + __u64 ecn_marked; /* packets ECN CE-marked (not dropped)*/ + __u64 allocation_errors; +}; + /* DRR */ enum { diff --git a/include/uapi/linux/pps.h b/include/uapi/linux/pps.h index 009ebcd8ced5..1088dea65e12 100644 --- a/include/uapi/linux/pps.h +++ b/include/uapi/linux/pps.h @@ -26,7 +26,7 @@ #include <linux/types.h> #define PPS_VERSION "5.3.6" -#define PPS_MAX_SOURCES 16 /* should be enough... */ +#define PPS_MAX_SOURCES 256 /* should be enough... */ /* Implementation note: the logical states ``assert'' and ``clear'' * are implemented in terms of the chip register, i.e. ``assert'' diff --git a/include/uapi/linux/psp.h b/include/uapi/linux/psp.h index a3a336488dc3..1c8899cd4da5 100644 --- a/include/uapi/linux/psp.h +++ b/include/uapi/linux/psp.h @@ -18,10 +18,21 @@ enum psp_version { }; enum { + PSP_A_ASSOC_DEV_INFO_IFINDEX = 1, + PSP_A_ASSOC_DEV_INFO_NSID, + + __PSP_A_ASSOC_DEV_INFO_MAX, + PSP_A_ASSOC_DEV_INFO_MAX = (__PSP_A_ASSOC_DEV_INFO_MAX - 1) +}; + +enum { PSP_A_DEV_ID = 1, PSP_A_DEV_IFINDEX, PSP_A_DEV_PSP_VERSIONS_CAP, PSP_A_DEV_PSP_VERSIONS_ENA, + PSP_A_DEV_ASSOC_LIST, + PSP_A_DEV_NSID, + PSP_A_DEV_BY_ASSOCIATION, __PSP_A_DEV_MAX, PSP_A_DEV_MAX = (__PSP_A_DEV_MAX - 1) @@ -74,6 +85,8 @@ enum { PSP_CMD_RX_ASSOC, PSP_CMD_TX_ASSOC, PSP_CMD_GET_STATS, + PSP_CMD_DEV_ASSOC, + PSP_CMD_DEV_DISASSOC, __PSP_CMD_MAX, PSP_CMD_MAX = (__PSP_CMD_MAX - 1) diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index dab9493c791b..27265fd31e5f 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -840,6 +840,7 @@ enum { #define RTEXT_FILTER_CFM_CONFIG (1 << 5) #define RTEXT_FILTER_CFM_STATUS (1 << 6) #define RTEXT_FILTER_MST (1 << 7) +#define RTEXT_FILTER_NAME_ONLY (1 << 8) /* End of information exported to user level */ diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h index b8b9c42f848c..1245ab38afc1 100644 --- a/include/uapi/linux/tls.h +++ b/include/uapi/linux/tls.h @@ -203,6 +203,6 @@ enum { #define TLS_CONF_BASE 1 #define TLS_CONF_SW 2 #define TLS_CONF_HW 3 -#define TLS_CONF_HW_RECORD 4 +#define TLS_CONF_HW_RECORD 4 /* unused */ #endif /* _UAPI_LINUX_TLS_H */ diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index a23495c0e0a1..051f8066efd1 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -227,6 +227,9 @@ enum { #define XFRM_MSG_SETDEFAULT XFRM_MSG_SETDEFAULT XFRM_MSG_GETDEFAULT, #define XFRM_MSG_GETDEFAULT XFRM_MSG_GETDEFAULT + + XFRM_MSG_MIGRATE_STATE, +#define XFRM_MSG_MIGRATE_STATE XFRM_MSG_MIGRATE_STATE __XFRM_MSG_MAX }; #define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1) @@ -507,6 +510,28 @@ struct xfrm_user_migrate { __u16 new_family; }; +struct xfrm_user_migrate_state { + struct xfrm_usersa_id id; + xfrm_address_t new_daddr; + xfrm_address_t new_saddr; + struct xfrm_mark old_mark; + struct xfrm_selector new_sel; + __u32 new_reqid; + __u32 flags; + __u16 new_family; + __u16 reserved; +}; + +/* Flags for xfrm_user_migrate_state.flags */ +enum xfrm_migrate_state_flags { + XFRM_MIGRATE_STATE_CLEAR_OFFLOAD = 1, /* do not inherit offload from existing SA */ + XFRM_MIGRATE_STATE_UPDATE_H2H_SEL = 2, /* update H2H selector from new daddr/saddr */ +}; + +/* All flags defined as of this header version; unknown bits are rejected. */ +#define XFRM_MIGRATE_STATE_KNOWN_FLAGS \ + (XFRM_MIGRATE_STATE_CLEAR_OFFLOAD | XFRM_MIGRATE_STATE_UPDATE_H2H_SEL) + struct xfrm_user_mapping { struct xfrm_usersa_id id; __u32 reqid; |