Merge tag 'ata-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

Pull ata updates from Damien Le Moal:

 - Some code cleanups to rename the function used to identify ZAC
   devices and declare some local functions static (me)

 - Refactoring and improvement of the translation of the SCSI REPORT
   SUPPORTED OPCODES command to allow users access to the entire list of
   supported commands (me)

 - Fix the translation of the WRITE SAME command with UNMAP bit set (DSM
   TRIM) for devices with a sector size larger than 2K and devices that
   support multiple TRIM segments (Niklas)

 - Add support detecting support for and translating the SCSI commands
   related to the storage elements depopulation feature (GET PHYSICAL
   ELEMENT STATUS, REMOVE ELEMENT AND TRUCATE, REMOVE ELEMENT AND MODIFY
   ZONES and RESTORE ELEMENTS AND REBUILD) (me)

 - Improvements to the sata_mv driver probe code (clocks and IRQ
   initialization) (Rosen)

 - Improve resource initialization in the pata_rb532_cf, pata_pxa,
   sata_highbank and ahci_da850 drivers (Rosen)

 - Improve PIO data-in command completions to better hndle slow devices,
   e.g. CF cards (Richard)

 - Improve the DMA channel management using device resources in the
   pata_pxa driver (Rosen)

 - Fix the pata_ep93xx driver to correctly fallback to PIO mode if DMA
   initialization fails (Rosen)

 - Use named initializers to define the match tables of the ahci_xgene,
   ahci_qoriq and ahci_platform drivers (Pawel)

* tag 'ata-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (28 commits)
  ata: use named initializers for acpi_device_id
  ata: pata_ep93xx: fix PIO fallback when DMA init fails
  ata: pata_pxa: use devres for DMA channel management
  ata: libata-sff: don't busy-wait for PIO data-in command completion
  ata: ahci_da850: use devm_platform_ioremap_resource()
  ata: sata_highbank: use devm_platform_ioremap_resource
  ata: pata_pxa: use devm_platform_ioremap_resource
  ata: pata_rb532_cf: use devm_platform_ioremap_resource()
  ata: sata_mv: use devm clock helpers
  ata: sata_mv: Use platform_get_irq() to get interrupt
  ata: pata_mpc52xx: Remove redundant dev_err()
  ata: libata-eh: make ata_eh_qc_complete() and ata_eh_qc_retry() static
  ata: libata-scsi: add support for the REMOVE ELEMENT AND MODIFY ZONES command
  ata: libata-scsi: add support for the RESTORE ELEMENTS AND REBUILD command
  ata: libata-scsi: add support for the REMOVE ELEMENT AND TRUNCATE command
  ata: libata-scsi: add support for the GET PHYSICAL ELEMENT STATUS command
  ata: libata-core: detect support for depopulation capabilities
  ata: libata-scsi: improve ata_get_xlat_func
  ata: libata: improve the definition of device flags
  scsi: define depopulation capabilities related service actions
  ...

1 files changed, 74 insertions, 0 deletions

diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h
index f64385cde5b9..c6b4a4dc8d9c 100644
--- a/include/scsi/scsi_proto.h
+++ b/include/scsi/scsi_proto.h
@@ -129,6 +129,10 @@
 #define SAI_GET_LBA_STATUS    0x12
 #define SAI_REPORT_REFERRALS  0x13
 #define SAI_GET_STREAM_STATUS 0x16
+#define SAI_GET_PHYSICAL_ELEMENT_STATUS 0x17
+#define SAI_REMOVE_ELEMENT_AND_TRUNCATE 0x18
+#define SAI_RESTORE_ELEMENTS_AND_REBUILD 0x19
+#define SAI_REMOVE_ELEMENT_AND_MODIFY_ZONES 0x1a
 /* values for maintenance in */
 #define MI_REPORT_IDENTIFYING_INFORMATION 0x05
 #define MI_REPORT_TARGET_PGS  0x0a
@@ -234,6 +238,57 @@ enum sam_status {
 #define COMPLETED	    0x0f
 
 /*
+ * Additional Sense Codes (ASC).
+ */
+#define NO_ADDITIONAL_SENSE		0x00
+#define OVERLAP_ATOMIC_COMMAND_ASC	0x00
+#define LOGICAL_UNIT_NOT_READY		0x04
+#define LOGICAL_UNIT_COMMUNICATION_FAILURE 0x8
+#define WRITE_ERROR_ASC			0x0c
+#define UNRECOVERED_READ_ERR		0x11
+#define PARAMETER_LIST_LENGTH_ERR	0x1a
+#define MISCOMPARE_VERIFY_ASC		0x1d
+#define INVALID_OPCODE			0x20
+#define LBA_OUT_OF_RANGE		0x21
+#define INVALID_FIELD_IN_CDB		0x24
+#define INVALID_FIELD_IN_PARAM_LIST	0x26
+#define WRITE_PROTECTED			0x27
+#define UA_READY_ASC			0x28
+#define UA_RESET_ASC			0x29
+#define UA_CHANGED_ASC			0x2a
+#define TOO_MANY_IN_PARTITION_ASC	0x3b
+#define TARGET_CHANGED_ASC		0x3f
+#define SAVING_PARAMS_UNSUP		0x39
+#define TRANSPORT_PROBLEM		0x4b
+#define INSUFF_RES_ASC			0x55
+#define LOW_POWER_COND_ON		0x5e
+#define THRESHOLD_EXCEEDED		0x5d
+
+/*
+ * Additional Sense Code Qualifiers (ASCQ).
+ */
+#define POWER_ON_RESET_ASCQ		0x00
+#define MODE_CHANGED_ASCQ		0x01	/* mode parameters changed */
+#define FILEMARK_DETECTED_ASCQ		0x01
+#define POWER_ON_OCCURRED_ASCQ		0x01
+#define MICROCODE_CHANGED_ASCQ		0x01	/* with TARGET_CHANGED_ASC */
+#define BUS_RESET_ASCQ			0x02	/* scsi bus reset occurred */
+#define EOP_EOM_DETECTED_ASCQ		0x02
+#define INSUFF_RES_ASCQ			0x03
+#define BEGINNING_OF_P_M_DETECTED_ASCQ	0x04
+#define UNALIGNED_WRITE_ASCQ		0x04
+#define EOD_DETECTED_ASCQ		0x05
+#define WRITE_BOUNDARY_ASCQ		0x05
+#define READ_INVDATA_ASCQ		0x06
+#define READ_BOUNDARY_ASCQ		0x07
+#define CAPACITY_CHANGED_ASCQ		0x09
+#define ATTEMPT_ACCESS_GAP		0x09
+#define LUNS_CHANGED_ASCQ		0x0e
+#define INSUFF_ZONE_ASCQ		0x0e
+#define MICROCODE_CHANGED_WO_RESET_ASCQ 0x16
+#define OVERLAP_ATOMIC_COMMAND_ASCQ	0x23
+
+/*
  *  DEVICE TYPES
  *  Please keep them in 0x%02x format for $MODALIAS to work
  */
@@ -413,6 +468,25 @@ enum zbc_zone_alignment_method {
 	ZBC_CONSTANT_ZONE_START_OFFSET	= 0x8,
 };
 
+/* SCSI physical element types */
+enum scsi_phys_element_type {
+	SCSI_PHYS_ELEM_TYPE_ALL_ACCESS_STORAGE	= 0x1,
+	SCSI_PHYS_ELEM_TYPE_FRAC_ACCESS_STORAGE	= 0x2,
+};
+
+/* SCSI physical element health. */
+enum scsi_phys_element_health {
+	SCSI_PHYS_ELEM_HEALTH_NOT_REPORTED		= 0x00,
+	SCSI_PHYS_ELEM_HEALTH_WITHIN_SPEC_LIMITS	= 0x01,
+	SCSI_PHYS_ELEM_HEALTH_AT_SPEC_LIMITS		= 0x64,
+	SCSI_PHYS_ELEM_HEALTH_OUTSIDE_SPEC_LIMITS	= 0x65,
+	SCSI_PHYS_ELEM_HEALTH_DEPOP_REVOKE_ERR		= 0xFB,
+	SCSI_PHYS_ELEM_HEALTH_DEPOP_REVOKE_IN_PROGRESS	= 0xFC,
+	SCSI_PHYS_ELEM_HEALTH_DEPOP_ERR			= 0xFD,
+	SCSI_PHYS_ELEM_HEALTH_DEPOP_IN_PROGRESS		= 0xFE,
+	SCSI_PHYS_ELEM_HEALTH_DEPOP_OK			= 0xFF,
+};
+
 /* Version descriptor values for INQUIRY */
 enum scsi_version_descriptor {
 	SCSI_VERSION_DESCRIPTOR_FCP4	= 0x0a40,