wifi: ath12k: Fix low MLO RX throughput on WCN7850

Commit [1] introduced a regression causing severely degraded MLO RX
throughput on WCN7850.

On WCN7850, there is only a single ar instance, but MLO uses two
link IDs. ath12k_dp_peer->hw_links[] is indexed using ar->hw_link_id,
which causes both MLO link IDs to be stored at the same index.

As a result, an incorrect link ID is assigned to MSDUs in
ath12k_dp_rx_deliver_msdu(), leading to severe MLO RX throughput loss.

Different chipsets identify the per-MSDU link differently:

  - On QCN9274 / IPQ5332, the host owns multiple ar instances and the
    per-MSDU hw_link_id from the RX descriptor maps cleanly through
    dp_peer->hw_links[hw_link_id] to the IEEE link_id.

  - On single-ar chipsets like WCN7850 / QCC2072, there is only one ar
    instance for both MLO links, so dp_peer->hw_links[] has just one
    valid slot and cannot be used to distinguish the two links. To
    resolve the link, walk dp_peer->link_peers[] and match by
    rxcb->peer_id, which on the link_peer side identifies the link
    peer for the MSDU.

Add a new hw_op set_rx_link_id() so each chipset resolves the link
on the RX fast path using whatever signal it actually has, and let
the op itself decide whether to populate rx_status::link_valid and
rx_status::link_id:

  QCN9274 / IPQ5332 : always derive link_id from
                      dp_peer->hw_links[rxcb->hw_link_id] and set
                      link_valid.
  WCN7850 / QCC2072 : walk the link_peers[] of dp_peer to find the
                      link_peer whose peer_id matches rxcb->peer_id,
                      and set link_valid only when a match is found.
                      Otherwise leave link_valid clear so that
                      mac80211 can fall back to its own link
                      resolution path (via addr2 / deflink).

For WCN7850 / QCC2072, walking dp_peer->link_peers[] is bounded by
the number of links actually populated, so introduce a link_peers_map
bitmap (unsigned long) in struct ath12k_dp_peer that tracks populated
slots and use for_each_set_bit() to iterate. Non-MLO clients hit one
slot, current MLO clients hit two; the full ATH12K_NUM_MAX_LINKS
array is never scanned. The bitmap is maintained with WRITE_ONCE() on
the write side (under dp_hw->peer_lock) paired with READ_ONCE() on
both the lockless RX read side and the write-side RMW for KCSAN
correctness.

Also guard the dp_peer dereference in ath12k_mac_peer_cleanup_all()
with a NULL check, since peer->dp_peer can be NULL for self-peers or
peers not yet fully assigned, the pre-existing rcu_assign_pointer()
call there had the same latent issue.

This restores the correct link ID on WCN7850 without changing the
QCN9274 / IPQ5332 data path, which keeps its O(1) hw_links[]
indexing.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3

Fixes: 11157e0910fd ("wifi: ath12k: Use ath12k_dp_peer in per packet Tx & Rx paths") # [1]
Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260610053315.2249912-1-yingying.tang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

0 files changed, 0 insertions, 0 deletions