soundwire: qcom: add SCP address paging support

The Qualcomm controller driver ignores the paging fields of struct
sdw_msg. For a paged access (register address >= 0x8000 on a
paging-capable peripheral, e.g. the SDCA control space at
0x40000000+) the core sets BIT(15) in the wire address and splits the
upper bits into addr_page1/addr_page2, but since the controller never
programmed the SCP_AddrPage registers the peripheral resolved every
such command against their reset value: reads and writes were
silently redirected to addr[14:0] in page 0.

Write the two SCP_AddrPage registers through the command FIFO before
the transfer, as cadence_master.c (cdns_program_scp_addr) and
amd_manager.c (amd_program_scp_addr) do. Like those controllers the
pages are programmed on every paged message rather than cached per
device; a cache can be a follow-up if the two extra FIFO commands
ever matter.

No peripheral on a Qualcomm bus sets prop.paging_support in mainline
today; the first user is the WCD9378 codec, whose driver is being
upstreamed separately - its entire register map, the
wcd937x-compatible analog core included, lives in the SDCA address
space.

Verified on the Fairphone 6 (SM7635): WCD9378 SDCA registers read
back their documented reset defaults and audio capture through the
codec works end-to-end; without this change every paged access landed
in page 0.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706192150.143921-1-jorijnvdgraaf@catcrafts.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>

0 files changed, 0 insertions, 0 deletions