Merge tag 'spi-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "A busy release for SPI, almost all of it in a couple of larger fix and
  cleanup series for patterns that affected many drivers. We do have a
  couple of core API additions as well, relatively application specific
  but they enable some new use cases.

   - A packed command operation for spi-mem devices

   - Improvements to the ancillary device support to enable some IIO use
     cases from Antoniu Miclaus

   - Fixes for a registration ordering issue pattern caused by the
     handover between allocation and registration of controllers in
     concert with devm from Johan Hovold

   - Improvements to handling of clock allocation from Pei Xiao

   - Cleanups in the fsl-lpspi driver from Marc Kleine-Budde

   - Support for Renesas RZ/G3E and RZ/G3L"

* tag 'spi-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (115 commits)
  spi: sn-f-ospi: fix incorrect return code for invalid num-cs
  spi: spi-mem: Add a packed command operation
  spi: cadence-qspi: Revert the filtering of certain opcodes in ODTR
  spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback
  spi: s3c64xx: fix NULL-deref on driver unbind
  spi: zynq-qspi: fix controller deregistration
  spi: zynqmp-gqspi: fix controller deregistration
  spi: uniphier: fix controller deregistration
  spi: ti-qspi: fix controller deregistration
  spi: tegra20-sflash: fix controller deregistration
  spi: tegra114: fix controller deregistration
  spi: syncuacer: fix controller deregistration
  spi: sun6i: fix controller deregistration
  spi: sun4i: fix controller deregistration
  spi: st-ssc4: fix controller deregistration
  spi: sprd: fix controller deregistration
  spi: slave-mt27xx: fix controller deregistration
  spi: sifive: fix controller deregistration
  spi: sh-msiof: fix controller deregistration
  spi: sh-hspi: fix controller deregistration
  ...

2 files changed, 15 insertions, 2 deletions

diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 5774e554c0f0..c8e207522223 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -28,6 +28,14 @@
 		.dtr = true,					\
 	}
 
+#define SPI_MEM_DTR_OP_PACKED_CMD(__opcode, __addr, __buswidth)	\
+	{							\
+		.nbytes = 2,					\
+		.opcode = __opcode << 8 | __addr,		\
+		.buswidth = __buswidth,				\
+		.dtr = true,					\
+	}
+
 #define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth)		\
 	{							\
 		.nbytes = __nbytes,				\
@@ -130,11 +138,13 @@ enum spi_mem_data_dir {
 
 /**
  * struct spi_mem_op - describes a SPI memory operation
+ * @cmd: the complete command
  * @cmd.nbytes: number of opcode bytes (only 1 or 2 are valid). The opcode is
  *		sent MSB-first.
  * @cmd.buswidth: number of IO lines used to transmit the command
  * @cmd.opcode: operation opcode
  * @cmd.dtr: whether the command opcode should be sent in DTR mode or not
+ * @addr: the address attributes
  * @addr.nbytes: number of address bytes to send. Can be zero if the operation
  *		 does not need to send an address
  * @addr.buswidth: number of IO lines used to transmit the address cycles
@@ -143,10 +153,12 @@ enum spi_mem_data_dir {
  *	      Note that only @addr.nbytes are taken into account in this
  *	      address value, so users should make sure the value fits in the
  *	      assigned number of bytes.
+ * @dummy: data for dummy operation
  * @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can
  *		  be zero if the operation does not require dummy bytes
  * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes
  * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or not
+ * @data: the data attributes
  * @data.buswidth: number of IO lanes used to send/receive the data
  * @data.dtr: whether the data should be sent in DTR mode or not
  * @data.ecc: whether error correction is required or not
@@ -273,7 +285,7 @@ struct spi_mem {
 };
 
 /**
- * struct spi_mem_set_drvdata() - attach driver private data to a SPI mem
+ * spi_mem_set_drvdata() - attach driver private data to a SPI mem
  *				  device
  * @mem: memory device
  * @data: data to attach to the memory device
@@ -284,7 +296,7 @@ static inline void spi_mem_set_drvdata(struct spi_mem *mem, void *data)
 }
 
 /**
- * struct spi_mem_get_drvdata() - get driver private data attached to a SPI mem
+ * spi_mem_get_drvdata() - get driver private data attached to a SPI mem
  *				  device
  * @mem: memory device
  *
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 0dc671c07d3a..7587b1c5d7ec 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -382,6 +382,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
 }
 
 extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 chip_select);
+extern struct spi_device *devm_spi_new_ancillary_device(struct spi_device *spi, u8 chip_select);
 
 /* Use a define to avoid include chaining to get THIS_MODULE */
 #define spi_register_driver(driver) \