serial: Replace driver usage of UPF_CONS_FLOW

Rather than using the UPF_CONS_FLOW bit of uart_port.flags to track
the user configuration of console flow control, use the newly added
uart_port.cons_flow (via its getter/setter functions).

A coccinelle script was used to perform the search/replace.

Note1: The sh-sci driver is blindly copying platform data configuration
       flags to uart_port.flags. Thus UPF_CONS_FLOW could get set for
       uart_port.flags. A follow-up commit will address this.

Note2: The samsung_tty driver is using UPF_CONS_FLOW as a platform data
       configuration flag. However, the driver explicitly checks for
       this configuration flag and thus setting UPF_CONS_FLOW in
       uart_port.flags is avoided.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://patch.msgid.link/20260506121606.5805-3-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8 files changed, 13 insertions, 13 deletions

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 02e6cdefdbac..e4e6a53ebea3 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1990,7 +1990,7 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 	wait_for_lsr(up, bits);
 
 	/* Wait up to 1s for flow control if necessary */
-	if (up->port.flags & UPF_CONS_FLOW) {
+	if (uart_cons_flow_enabled(&up->port)) {
 		for (tmout = 1000000; tmout; tmout--) {
 			unsigned int msr = serial_in(up, UART_MSR);
 			up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
@@ -3353,7 +3353,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
 		 * it regardless of the CTS state. Therefore, only use fifo
 		 * if we don't use control flow.
 		 */
-		!(up->port.flags & UPF_CONS_FLOW);
+		!uart_cons_flow_enabled(&up->port);
 
 	if (likely(use_fifo))
 		serial8250_console_fifo_write(up, s, count);
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 51df9d2d8bfc..544695cb184c 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -675,7 +675,7 @@ static void wait_for_xmitr(struct uart_port *port)
 	}
 
 	/* Wait up to 1s for flow control if necessary */
-	if (port->flags & UPF_CONS_FLOW) {
+	if (uart_cons_flow_enabled(port)) {
 		tmout = 1000000;
 		while (--tmout) {
 			unsigned int val;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 0b85f47ff19e..a689d190940c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1092,7 +1092,7 @@ static void __maybe_unused wait_for_xmitr(struct uart_omap_port *up)
 	} while (!uart_lsr_tx_empty(status));
 
 	/* Wait up to 1s for flow control if necessary */
-	if (up->port.flags & UPF_CONS_FLOW) {
+	if (uart_cons_flow_enabled(&up->port)) {
 		for (tmout = 1000000; tmout; tmout--) {
 			unsigned int msr = serial_in(up, UART_MSR);
 
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 6729d8e83c3c..2f72cd62e248 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1444,7 +1444,7 @@ static void wait_for_xmitr(struct eg20t_port *up, int bits)
 	}
 
 	/* Wait up to 1s for flow control if necessary */
-	if (up->port.flags & UPF_CONS_FLOW) {
+	if (uart_cons_flow_enabled(&up->port)) {
 		unsigned int tmout;
 		for (tmout = 1000000; tmout; tmout--) {
 			unsigned int msr = ioread8(up->membase + UART_MSR);
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index fea0255067cc..10fc8990579b 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -573,7 +573,7 @@ static void wait_for_xmitr(struct uart_pxa_port *up)
 	} while (!uart_lsr_tx_empty(status));
 
 	/* Wait up to 1s for flow control if necessary */
-	if (up->port.flags & UPF_CONS_FLOW) {
+	if (uart_cons_flow_enabled(&up->port)) {
 		tmout = 1000000;
 		while (--tmout &&
 		       ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index e27806bf2cf3..2f94fc798cff 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -319,7 +319,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 	ourport->tx_enabled = 0;
 	ourport->tx_in_progress = 0;
 
-	if (port->flags & UPF_CONS_FLOW)
+	if (uart_cons_flow_enabled(port))
 		s3c24xx_serial_rx_enable(port);
 
 	ourport->tx_mode = 0;
@@ -493,7 +493,7 @@ static void s3c24xx_serial_start_tx(struct uart_port *port)
 	struct tty_port *tport = &port->state->port;
 
 	if (!ourport->tx_enabled) {
-		if (port->flags & UPF_CONS_FLOW)
+		if (uart_cons_flow_enabled(port))
 			s3c24xx_serial_rx_disable(port);
 
 		ourport->tx_enabled = 1;
@@ -781,7 +781,7 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
 		uerstat = rd_regl(port, S3C2410_UERSTAT);
 		ch = rd_reg(port, S3C2410_URXH);
 
-		if (port->flags & UPF_CONS_FLOW) {
+		if (uart_cons_flow_enabled(port)) {
 			bool txe = s3c24xx_serial_txempty_nofifo(port);
 
 			if (ourport->rx_enabled) {
@@ -1830,7 +1830,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 	if (cfg->uart_flags & UPF_CONS_FLOW) {
 		dev_dbg(port->dev, "enabling flow control\n");
-		port->flags |= UPF_CONS_FLOW;
+		uart_set_cons_flow_enabled(port, true);
 	}
 
 	/* sort our the physical and virtual addresses for each UART */
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 436a559234df..4ae9a45c8e3a 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -422,7 +422,7 @@ static void wait_for_xmitr(struct uart_port *up)
 		udelay(1);
 
 	/* Wait up to 1s for flow control if necessary */
-	if (up->flags & UPF_CONS_FLOW) {
+	if (uart_cons_flow_enabled(up)) {
 		tmout = 1000000;
 		while (--tmout &&
 		       (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
@@ -857,7 +857,7 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
 	 *	Disable flow-control if enabled (and unnecessary)
 	 */
 	flcr = sio_in(up, TXX9_SIFLCR);
-	if (!(up->flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES))
+	if (!uart_cons_flow_enabled(up) && (flcr & TXX9_SIFLCR_TES))
 		sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES);
 
 	uart_console_write(up, s, count, serial_txx9_console_putchar);
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 6505a1930da9..4ff3e5c41dab 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1245,7 +1245,7 @@ static void wait_for_xmitr(struct uart_sunsu_port *up)
 	} while (!uart_lsr_tx_empty(status));
 
 	/* Wait up to 1s for flow control if necessary */
-	if (up->port.flags & UPF_CONS_FLOW) {
+	if (uart_cons_flow_enabled(&up->port)) {
 		tmout = 1000000;
 		while (--tmout &&
 		       ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))