ata: libata-pmp: add JMicron JMS562 quirk

JMicron JMS562, as used in QNAP QDA-A2AR RAID1 adapters, may
keep the exported ATA device not ready while the array is rebuilding.

In this state, libata may repeatedly try to softreset and classify
the fan-out link.  On the affected adapter, this can time out, make
PMP/SCR access fail, and eventually disable the fan-out link before
the RAID volume is exported.

A failing boot shows the fan-out link failing SRST, PMP access
timing out, SCR read failing, and the link being disabled:

  ata4.00: softreset failed (device not ready)
  ata4.15: qc timeout after 3000 msecs (cmd 0xe4)
  ata4.00: failed to read SCR 0 (Emask=0x4)
  ata4.00: failed to recover link after 3 tries, disabling

After that, the root filesystem on the exported RAID volume cannot
be found.

Add JMS562 to the existing JMicron PMP quirk that disables LPM,
avoids softreset on fan-out links, and assumes an ATA device.  This
prevents libata from dropping the exported RAID volume during rebuild
recovery.

Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>

0 files changed, 0 insertions, 0 deletions