Merge tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "Once again, cpufreq is the most active development area, mostly
  because of the new feature additions and documentation updates in the
  amd-pstate driver, but there are also changes in the cpufreq core
  related to boost support and other assorted updates elsewhere.

  Next up are power capping changes due to the major cleanup of the
  Intel RAPL driver.

  On the cpuidle front, a new C-states table for Intel Panther Lake is
  added to the intel_idle driver, the stopped tick handling in the menu
  and teo governors is updated, and there are a couple of cleanups.

  Apart from the above, support for Tegra114 is added to devfreq and
  there are assorted cleanups of that code, there are also two updates
  of the operating performance points (OPP) library, two minor updates
  related to hibernation, and cpupower utility man pages updates and
  cleanups.

  Specifics:

   - Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)

   - Update cpufreq-dt-platdev blocklist (Faruque Ansari)

   - Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
     Rosen Penev)

   - Add MAINTAINERS entry for CPPC driver (Viresh Kumar)

   - Add support for new features: CPPC performance priority, Dynamic
     EPP, Raw EPP, and new unit tests for them to amd-pstate (Gautham
     Shenoy, Mario Limonciello)

   - Fix sysfs files being present when HW missing and broken/outdated
     documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)

   - Pass the policy to cpufreq_driver->adjust_perf() to avoid using
     cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate
     which leads to a scheduling-while-atomic bug (K Prateek Nayak)

   - Clean up dead code in Kconfig for cpufreq (Julian Braha)

   - Remove max_freq_req update for pre-existing cpufreq policy and add
     a boost_freq_req QoS request to save the boost constraint instead
     of overwriting the last scaling_max_freq constraint (Pierre
     Gondois)

   - Embed cpufreq QoS freq_req objects in cpufreq policy so they all
     are allocated in one go along with the policy to simplify lifetime
     rules and avoid error handling issues (Viresh Kumar)

   - Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
     scaling driver (Henry Tseng)

   - Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
     of cpumask_weight() because the former is more efficient (Yury
     Norov)

   - Use sysfs_emit() in sysfs show functions for cpufreq governor
     attributes (Thorsten Blum)

   - Update intel_pstate to stop returning an error when "off" is
     written to its status sysfs attribute while the driver is already
     off (Fabio De Francesco)

   - Include current frequency in the debug message printed by
     __cpufreq_driver_target() (Pengjie Zhang)

   - Refine stopped tick handling in the menu cpuidle governor and
     rearrange stopped tick handling in the teo cpuidle governor (Rafael
     Wysocki)

   - Add Panther Lake C-states table to the intel_idle driver (Artem
     Bityutskiy)

   - Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)

   - Simplify cpuidle_register_device() with guard() (Huisong Li)

   - Use performance level if available to distinguish between rates in
     OPP debugfs (Manivannan Sadhasivam)

   - Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)

   - Return -ENODATA if the snapshot image is not loaded (Alberto
     Garcia)

   - Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
     Biggers)

   - Clean up and rearrange the intel_rapl power capping driver to make
     the respective interface drivers (TPMI, MSR, and MMOI) hold their
     own settings and primitives and consolidate PL4 and PMU support
     flags into rapl_defaults (Kuppuswamy Sathyanarayanan)

   - Correct kernel-doc function parameter names in the power capping
     core code (Randy Dunlap)

   - Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)

   - Use _visible attribute to replace create/remove_sysfs_files() in
     devfreq (Pengjie Zhang)

   - Add Tegra114 support to activity monitor device in tegra30-devfreq
     as a preparation to upcoming EMC controller support (Svyatoslav
     Ryhel)

   - Fix mistakes in cpupower man pages, add the boost and epp options
     to the cpupower-frequency-info man page, and add the perf-bias
     option to the cpupower-info man page (Roberto Ricci)

   - Remove unnecessary extern declarations from getopt.h in arguments
     parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
     cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)"

* tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
  cpupower: remove extern declarations in cmd functions
  cpuidle: Simplify cpuidle_register_device() with guard()
  PM / devfreq: tegra30-devfreq: add support for Tegra114
  PM / devfreq: use _visible attribute to replace create/remove_sysfs_files()
  PM / devfreq: Remove unneeded casting for HZ_PER_KHZ
  MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
  cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
  cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
  cpufreq/amd-pstate-ut: Add a unit test for raw EPP
  cpufreq/amd-pstate: Add support for raw EPP writes
  cpufreq/amd-pstate: Add support for platform profile class
  cpufreq/amd-pstate: add kernel command line to override dynamic epp
  cpufreq/amd-pstate: Add dynamic energy performance preference
  Documentation: amd-pstate: fix dead links in the reference section
  cpufreq/amd-pstate: Cache the max frequency in cpudata
  Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
  Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
  Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
  amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
  ...

0 files changed, 0 insertions, 0 deletions