diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2026-04-18 16:59:09 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2026-04-18 16:59:09 -0700 |
| commit | faeab166167f5787719eb8683661fd41a3bb1514 (patch) | |
| tree | 4483bcfbe6a67b555360e421860b0f6ef16aa575 /Documentation/devicetree/bindings/pinctrl | |
| parent | 401b0e0bc96543881924d623388a9472b3331b3f (diff) | |
| parent | 90700e10d2ad61c13a5117cfa5e08d9f2e497dcc (diff) | |
Merge tag 'pinctrl-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlHEADmaster
Pull pin control updates from Linus Walleij:
"Core changes:
- Perform basic checks on pin config properties so as not to allow
directly contradictory settings such as setting a pin to more than
one bias or drive mode
- Handle input-threshold-voltage-microvolt property
- Introduce pinctrl_gpio_get_config() handling in the core for SCMI
GPIO using pin control
New drivers:
- GPIO-by-pin control driver (also appearing in the GPIO pull
request) fulfilling a promise on a comment from Grant Likely many
years ago: "can't GPIO just be a front-end for pin control?" it
turns out it can, if and only if you design something new from
scratch, such as SCMI
- Broadcom BCM7038 as a pinctrl-single delegate
- Mobileye EyeQ6Lplus OLB pin controller
- Qualcomm Eliza and Hawi families TLMM pin controllers
- Qualcomm SDM670 and Milos family LPASS LPI pin controllers
- Qualcomm IPQ5210 pin controller
- Realtek RTD1625 pin controller support
- Rockchip RV1103B pin controller support
- Texas Instruments AM62L as a pinctrl-single delegate
Improvements:
- Set config implementation for the Spacemit K1 pin controller"
* tag 'pinctrl-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (84 commits)
pinctrl: qcom: Add Hawi pinctrl driver
dt-bindings: pinctrl: qcom: Describe Hawi TLMM block
dt-bindings: pinctrl: pinctrl-max77620: convert to DT schema
pinctrl: single: Add bcm7038-padconf compatible matching
dt-bindings: pinctrl: pinctrl-single: Add brcm,bcm7038-padconf
dt-bindings: pinctrl: apple,pinctrl: Add t8122 compatible
pinctrl: qcom: sdm670-lpass-lpi: label variables as static
pinctrl: sophgo: pinctrl-sg2044: Fix wrong module description
pinctrl: sophgo: pinctrl-sg2042: Fix wrong module description
pinctrl: qcom: add sdm670 lpi tlmm
dt-bindings: pinctrl: qcom: Add SDM670 LPASS LPI pinctrl
dt-bindings: qcom: lpass-lpi-common: add reserved GPIOs property
pinctrl: qcom: Introduce IPQ5210 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5210 pinctrl
pinctrl: qcom: Drop redundant intr_target_reg on modern SoCs
pinctrl: qcom: eliza: Fix interrupt target bit
pinctrl: core: Don't use "proxy" headers
pinctrl: amd: Support new ACPI ID AMDI0033
pinctrl: renesas: rzg2l: Drop superfluous blank line
pinctrl: renesas: rzg2l: Fix save/restore of {IOLH,IEN,PUPD,SMT} registers
...
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
23 files changed, 1220 insertions, 269 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml index 665ec79a69f1..41073176bc69 100644 --- a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml @@ -18,7 +18,9 @@ properties: compatible: oneOf: - items: - - const: apple,t6020-pinctrl + - enum: + - apple,t6020-pinctrl + - apple,t8122-pinctrl - const: apple,t8103-pinctrl - items: # Do not add additional SoC to this list. diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-iomuxc.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-iomuxc.yaml new file mode 100644 index 000000000000..1254bfcaa7cb --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-iomuxc.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx27-iomuxc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX1/i.MX25/i.MX27 IOMUX Controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + enum: + - fsl,imx1-iomuxc + - fsl,imx27-iomuxc + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + '^gpio@[0-9a-f]+$': + type: object + $ref: /schemas/gpio/fsl-imx-gpio.yaml + unevaluatedProperties: false + + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + three integers array, represents a group of pins mux and config + setting. The format is fsl,pins = <PIN MUX_ID CONFIG>. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: + PIN is an integer between 0 and 0xbf. imx27 has 6 ports with 32 + configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN + is the pin number on the specific port (between 0 and 31) + - description: | + MUX_ID is function + (direction << 2) + (gpio_oconf << 4) + + (gpio_iconfa << 8) + (gpio_iconfb << 10) + + function value is used to select the pin function. + Possible values: + 0 - Primary function + 1 - Alternate function + 2 - GPIO + Registers: GIUS (GPIO In Use), GPR (General Purpose Register) + + direction defines the data direction of the pin. + Possible values: + 0 - Input + 1 - Output + Register: DDIR + + gpio_oconf configures the gpio submodule output signal. + This does not have any effect unless GPIO function is + selected. A/B/C_IN are output signals of function blocks + A,B and C. Specific function blocks are described in the + reference manual. + Possible values: + 0 - A_IN + 1 - B_IN + 2 - C_IN + 3 - Data Register + Registers: OCR1, OCR2 + + gpio_iconfa/b configures the gpio submodule input to + functionblocks A and B. GPIO function should be selected if + this is configured. + Possible values: + 0 - GPIO_IN + 1 - Interrupt Status Register + 2 - Pulldown + 3 - Pullup + Registers ICONFA1, ICONFA2, ICONFB1 and ICONFB2 + + - description: + CONFIG can be 0 or 1, meaning Pullup disable/enable. + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +allOf: + - $ref: pinctrl.yaml# + +unevaluatedProperties: false + +examples: + - | + pinmux@10015000 { + compatible = "fsl,imx27-iomuxc"; + reg = <0x10015000 0x600>; + + uartgrp { + fsl,pins = < + 0x8c 0x004 0x0 /* UART1_TXD__UART1_TXD */ + 0x8d 0x000 0x0 /* UART1_RXD__UART1_RXD */ + 0x8e 0x004 0x0 /* UART1_CTS__UART1_CTS */ + 0x8f 0x000 0x0 /* UART1_RTS__UART1_RTS */ + >; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt deleted file mode 100644 index d1706ea82572..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt +++ /dev/null @@ -1,121 +0,0 @@ -* Freescale IMX27 IOMUX Controller - -Required properties: -- compatible: "fsl,imx27-iomuxc" - -The iomuxc driver node should define subnodes containing of pinctrl configuration subnodes. - -Required properties for pin configuration node: -- fsl,pins: three integers array, represents a group of pins mux and config - setting. The format is fsl,pins = <PIN MUX_ID CONFIG>. - - PIN is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable - configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin - number on the specific port (between 0 and 31). - - MUX_ID is - function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10) - - function value is used to select the pin function. - Possible values: - 0 - Primary function - 1 - Alternate function - 2 - GPIO - Registers: GIUS (GPIO In Use), GPR (General Purpose Register) - - direction defines the data direction of the pin. - Possible values: - 0 - Input - 1 - Output - Register: DDIR - - gpio_oconf configures the gpio submodule output signal. This does not - have any effect unless GPIO function is selected. A/B/C_IN are output - signals of function blocks A,B and C. Specific function blocks are - described in the reference manual. - Possible values: - 0 - A_IN - 1 - B_IN - 2 - C_IN - 3 - Data Register - Registers: OCR1, OCR2 - - gpio_iconfa/b configures the gpio submodule input to functionblocks A and - B. GPIO function should be selected if this is configured. - Possible values: - 0 - GPIO_IN - 1 - Interrupt Status Register - 2 - Pulldown - 3 - Pullup - Registers ICONFA1, ICONFA2, ICONFB1 and ICONFB2 - - CONFIG can be 0 or 1, meaning Pullup disable/enable. - - -The iomux controller has gpio child nodes which are embedded in the iomux -control registers. They have to be defined as child nodes of the iomux device -node. If gpio subnodes are defined "#address-cells", "#size-cells" and "ranges" -properties for the iomux device node are required. - -Example: - -iomuxc: iomuxc@10015000 { - compatible = "fsl,imx27-iomuxc"; - reg = <0x10015000 0x600>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio1: gpio@10015000 { - ... - }; - - ... - - uart { - pinctrl_uart1: uart-1 { - fsl,pins = < - 0x8c 0x004 0x0 /* UART1_TXD__UART1_TXD */ - 0x8d 0x000 0x0 /* UART1_RXD__UART1_RXD */ - 0x8e 0x004 0x0 /* UART1_CTS__UART1_CTS */ - 0x8f 0x000 0x0 /* UART1_RTS__UART1_RTS */ - >; - }; - - ... - }; -}; - - -For convenience there are macros defined in imx27-pinfunc.h which provide PIN -and MUX_ID. They are structured as MX27_PAD_<Pad name>__<Signal name>. The names -are defined in the i.MX27 reference manual. - -The above example using macros: - -iomuxc: iomuxc@10015000 { - compatible = "fsl,imx27-iomuxc"; - reg = <0x10015000 0x600>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio1: gpio@10015000 { - ... - }; - - ... - - uart { - pinctrl_uart1: uart-1 { - fsl,pins = < - MX27_PAD_UART1_TXD__UART1_TXD 0x0 - MX27_PAD_UART1_RXD__UART1_RXD 0x0 - MX27_PAD_UART1_CTS__UART1_CTS 0x0 - MX27_PAD_UART1_RTS__UART1_RTS 0x0 - >; - }; - - ... - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml index 265c43ab76f4..846e110062b2 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml @@ -20,6 +20,7 @@ properties: compatible: oneOf: - enum: + - fsl,imx25-iomuxc - fsl,imx35-iomuxc - fsl,imx51-iomuxc - fsl,imx53-iomuxc diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml index 4f9013d36874..727da7fb490c 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml @@ -84,11 +84,12 @@ patternProperties: properties: groups: - enum: [ emmc_nb, i2c1, i2c2, jtag, mii_col, onewire, pcie1, - pcie1_clkreq, pcie1_wakeup, pmic0, pmic1, ptp, ptp_clk, - ptp_trig, pwm0, pwm1, pwm2, pwm3, rgmii, sdio0, sdio_sb, smi, - spi_cs1, spi_cs2, spi_cs3, spi_quad, uart1, uart2, - usb2_drvvbus1, usb32_drvvbus0 ] + items: + enum: [ emmc_nb, i2c1, i2c2, jtag, mii_col, onewire, pcie1, + pcie1_clkreq, pcie1_wakeup, pmic0, pmic1, ptp, ptp_clk, + ptp_trig, pwm0, pwm1, pwm2, pwm3, rgmii, sdio0, sdio_sb, + smi, spi_cs1, spi_cs2, spi_cs3, spi_quad, uart1, uart2, + usb2_drvvbus1, usb32_drvvbus0 ] function: enum: [ drvbus, emmc, gpio, i2c, jtag, led, mii, mii_err, onewire, diff --git a/Documentation/devicetree/bindings/pinctrl/maxim,max77620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/maxim,max77620-pinctrl.yaml new file mode 100644 index 000000000000..b3ea36474317 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/maxim,max77620-pinctrl.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/maxim,max77620-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Pinmux controller function for Maxim MAX77620 Power management IC + +maintainers: + - Svyatoslav Ryhel <clamor95@gmail.com> + +description: + Device has 8 GPIO pins which can be configured as GPIO as well as the + special IO functions. + +allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml + - $ref: /schemas/pinctrl/pinmux-node.yaml + +patternProperties: + "^(pin|gpio).": + type: object + additionalProperties: false + + properties: + pins: + items: + enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7 ] + + function: + items: + enum: [ gpio, lpm-control-in, fps-out, 32k-out1, sd0-dvs-in, sd1-dvs-in, + reference-out ] + + drive-push-pull: true + drive-open-drain: true + bias-pull-up: true + bias-pull-down: true + + maxim,active-fps-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + FPS source for the GPIOs to get enabled/disabled when system is in + active state. Valid values are: + - MAX77620_FPS_SRC_0: FPS source is FPS0. + - MAX77620_FPS_SRC_1: FPS source is FPS1 + - MAX77620_FPS_SRC_2: FPS source is FPS2 + - MAX77620_FPS_SRC_NONE: GPIO is not controlled by FPS events and + it gets enabled/disabled by register access. + Absence of this property will leave the FPS configuration register + for that GPIO to default configuration. + + maxim,active-fps-power-up-slot: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Sequencing event slot number on which the GPIO get enabled when + master FPS input event set to HIGH. This is applicable if FPS source + is selected as FPS0, FPS1 or FPS2. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + maxim,active-fps-power-down-slot: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Sequencing event slot number on which the GPIO get disabled when + master FPS input event set to LOW. This is applicable if FPS source + is selected as FPS0, FPS1 or FPS2. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + maxim,suspend-fps-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This is same as property "maxim,active-fps-source" but value get + configured when system enters in to suspend state. + + maxim,suspend-fps-power-up-slot: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This is same as property "maxim,active-fps-power-up-slot" but this + value get configured into FPS configuration register when system + enters into suspend. This is applicable if suspend state FPS source + is selected as FPS0, FPS1 or FPS2. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + maxim,suspend-fps-power-down-slot: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This is same as property "maxim,active-fps-power-down-slot" but this + value get configured into FPS configuration register when system + enters into suspend. This is applicable if suspend state FPS source + is selected as FPS0, FPS1 or FPS2. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + required: + - pins + +additionalProperties: false + +# see maxim,max77620.yaml for an example diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml index a916d0fc79a9..97dbce8a261f 100644 --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml @@ -162,12 +162,105 @@ properties: this affects the expected delay in ps before latching a value to an output pin. -if: - required: - - skew-delay -then: - properties: - skew-delay-input-ps: false - skew-delay-output-ps: false + input-threshold-voltage-microvolt: + description: Specifies the input voltage level of the pin in microvolts. + This defines the reference for VIH (Input High Voltage) and VIL + (Input Low Voltage) thresholds for proper signal detection. + +allOf: + - if: + required: + - skew-delay + then: + properties: + skew-delay-input-ps: false + skew-delay-output-ps: false + + - if: + required: + - input-disable + then: + properties: + input-enable: false + input-threshold-voltage-microvolt: false + + - if: + required: + - output-disable + then: + properties: + output-enable: false + output-impedance-ohms: false + + - if: + required: + - output-low + then: + properties: + output-high: false + + - if: + required: + - low-power-enable + then: + properties: + low-power-disable: false + + - if: + required: + - input-schmitt-disable + then: + properties: + input-schmitt-enable: false + input-schmitt-microvolt: false + + - if: + required: + - drive-strength + then: + properties: + drive-strength-microamp: false + + - if: + anyOf: + - required: + - drive-open-source + - required: + - drive-open-drain + - required: + - drive-push-pull + then: + oneOf: + - required: + - drive-open-source + - required: + - drive-open-drain + - required: + - drive-push-pull + + - if: + anyOf: + - required: + - bias-disable + - required: + - bias-bus-hold + - required: + - bias-pull-up + - required: + - bias-pull-down + - required: + - bias-pull-pin-default + then: + oneOf: + - required: + - bias-disable + - required: + - bias-bus-hold + - required: + - bias-pull-up + - required: + - bias-pull-down + - required: + - bias-pull-pin-default additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt deleted file mode 100644 index 28fbca180068..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt +++ /dev/null @@ -1,127 +0,0 @@ -Pincontrol driver for MAX77620 Power management IC from Maxim Semiconductor. - -Device has 8 GPIO pins which can be configured as GPIO as well as the -special IO functions. - -Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt> -for details of the common pinctrl bindings used by client devices, -including the meaning of the phrase "pin configuration node". - -Optional Pinmux properties: --------------------------- -Following properties are required if default setting of pins are required -at boot. -- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. -- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - <pinctrl-bindings.txt>. - -The pin configurations are defined as child of the pinctrl states node. Each -sub-node have following properties: - -Required properties: ------------------- -- pins: List of pins. Valid values of pins properties are: - gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7. - -Optional properties: -------------------- -Following are optional properties defined as pinmux DT binding document -<pinctrl-bindings.txt>. Absence of properties will leave the configuration -on default. - function, - drive-push-pull, - drive-open-drain, - bias-pull-up, - bias-pull-down. - -Valid values for function properties are: - gpio, lpm-control-in, fps-out, 32k-out, sd0-dvs-in, sd1-dvs-in, - reference-out - -There are also customised properties for the GPIO1, GPIO2 and GPIO3. These -customised properties are required to configure FPS configuration parameters -of these GPIOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more -detail of Flexible Power Sequence (FPS). - -- maxim,active-fps-source: FPS source for the GPIOs to get - enabled/disabled when system is in - active state. Valid values are: - - MAX77620_FPS_SRC_0, - FPS source is FPS0. - - MAX77620_FPS_SRC_1, - FPS source is FPS1 - - MAX77620_FPS_SRC_2 and - FPS source is FPS2 - - MAX77620_FPS_SRC_NONE. - GPIO is not controlled - by FPS events and it gets - enabled/disabled by register - access. - Absence of this property will leave - the FPS configuration register for that - GPIO to default configuration. - -- maxim,active-fps-power-up-slot: Sequencing event slot number on which - the GPIO get enabled when - master FPS input event set to HIGH. - Valid values are 0 to 7. - This is applicable if FPS source is - selected as FPS0, FPS1 or FPS2. - -- maxim,active-fps-power-down-slot: Sequencing event slot number on which - the GPIO get disabled when master - FPS input event set to LOW. - Valid values are 0 to 7. - This is applicable if FPS source is - selected as FPS0, FPS1 or FPS2. - -- maxim,suspend-fps-source: This is same as property - "maxim,active-fps-source" but value - get configured when system enters in - to suspend state. - -- maxim,suspend-fps-power-up-slot: This is same as property - "maxim,active-fps-power-up-slot" but - this value get configured into FPS - configuration register when system - enters into suspend. - This is applicable if suspend state - FPS source is selected as FPS0, FPS1 or - -- maxim,suspend-fps-power-down-slot: This is same as property - "maxim,active-fps-power-down-slot" but - this value get configured into FPS - configuration register when system - enters into suspend. - This is applicable if suspend state - FPS source is selected as FPS0, FPS1 or - FPS2. - -Example: --------- -#include <dt-bindings/mfd/max77620.h> -... -max77620@3c { - - pinctrl-names = "default"; - pinctrl-0 = <&spmic_default>; - - spmic_default: pinmux@0 { - pin_gpio0 { - pins = "gpio0"; - function = "gpio"; - }; - - pin_gpio1 { - pins = "gpio1"; - function = "fps-out"; - maxim,active-fps-source = <MAX77620_FPS_SRC_0>; - }; - - pin_gpio2 { - pins = "gpio2"; - function = "fps-out"; - maxim,active-fps-source = <MAX77620_FPS_SRC_1>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml index 9135788cf62e..afe7329a1df2 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -38,6 +38,10 @@ properties: - enum: - marvell,pxa1908-padconf - const: pinconf-single + - items: + - enum: + - brcm,bcm7038-padconf + - const: pinctrl-single reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,eliza-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,eliza-tlmm.yaml new file mode 100644 index 000000000000..282650426487 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,eliza-tlmm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,eliza-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Eliza TLMM block + +maintainers: + - Abel Vesa <abel.vesa@oss.qualcomm.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm Eliza SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,eliza-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 93 + + gpio-line-names: + maxItems: 185 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-eliza-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-eliza-tlmm-state" + additionalProperties: false + +$defs: + qcom-eliza-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-4])$" + - enum: [ ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0, + audio_ref_clk, cam_mclk, cci_async_in, cci_i2c_scl, + cci_i2c_sda, cci_timer, coex_uart1_rx, coex_uart1_tx, + coex_uart2_rx, coex_uart2_tx, dbg_out_clk, + ddr_bist_complete, ddr_bist_fail, ddr_bist_start, + ddr_bist_stop, ddr_pxi0, ddr_pxi1, dp0_hot, egpio, + gcc_gp1, gcc_gp2, gcc_gp3, gnss_adc0, gnss_adc1, + hdmi_ddc_scl, hdmi_ddc_sda, hdmi_dtest0, hdmi_dtest1, + hdmi_hot_plug, hdmi_pixel_clk, hdmi_rcv_det, hdmi_tx_cec, + host2wlan_sol, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, + ibi_i3c, jitter_bist, mdp_esync0_out, mdp_esync1_out, + mdp_vsync, mdp_vsync0_out, mdp_vsync11_out, + mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, + mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, nav_gpio3, + pcie0_clk_req_n, pcie1_clk_req_n, phase_flag, + pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio_traceclk, + qdss_gpio_tracectl, qdss_gpio_tracedata, qlink_big_enable, + qlink_big_request, qlink_little_enable, + qlink_little_request, qlink_wmss, qspi0, qspi_clk, + qspi_cs, qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, + qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, + qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6, + qup2_se7, resout_gpio, sd_write_protect, sdc1, sdc2, + sdc2_fb_clk, tb_trig_sdc1, tb_trig_sdc2, tmess_prng0, + tmess_prng1, tmess_prng2, tmess_prng3, tsense_pwm1, + tsense_pwm2, tsense_pwm3, tsense_pwm4, uim0_clk, + uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data, + uim1_present, uim1_reset, usb0_hs, usb_phy, vfr_0, vfr_1, + vsense_trigger_mirnat, wcn_sw_ctrl ] + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@f100000 { + compatible = "qcom,eliza-tlmm"; + reg = <0x0f100000 0x300000>; + + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 186>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + qup-uart14-default-state { + pins = "gpio18", "gpio19"; + function = "qup2_se5"; + drive-strength = <2>; + bias-disable; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,hawi-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,hawi-tlmm.yaml new file mode 100644 index 000000000000..3b3961789860 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,hawi-tlmm.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,hawi-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Hawi TLMM block + +maintainers: + - Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm Hawi SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,hawi-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 113 + + gpio-line-names: + maxItems: 226 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-hawi-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-hawi-tlmm-state" + additionalProperties: false + +$defs: + qcom-hawi-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9]|21[0-9]|22[0-5])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk, + audio_ref_clk, cam_mclk, cci_async_in, cci_i2c0, cci_i2c1, + cci_i2c2, cci_i2c3, cci_i2c4, cci_i2c5, cci_timer, coex_espmi, + coex_uart1_rx, coex_uart1_tx, dbg_out_clk, ddr_bist, ddr_pxi, + dp_hot, egpio, gcc_gp, gnss_adc, host_rst, i2chub0_se0, + i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4, i2s0, i2s1, + ibi_i3c, jitter_bist, mdp_esync0, mdp_esync1, mdp_esync2, + mdp_vsync, mdp_vsync_e, mdp_vsync_p, mdp_vsync0_out, + mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, mdp_vsync5_out, + modem_pps_in, modem_pps_out, nav_gpio, nav_gpio0, nav_gpio3, + nav_rffe, pcie0_clk_req_n, pcie0_rst_n, pcie1_clk_req_n, + phase_flag, pll_bist_sync, pll_clk_aux, qdss_cti, qlink, + qspi, qspi_clk, qspi_cs, qup1_se0, qup1_se1, qup1_se2, + qup1_se3, qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, + qup2_se1, qup2_se2, qup2_se3, qup2_se4_01, qup2_se4_23, + qup3_se0_01, qup3_se0_23, qup3_se1, qup3_se2, qup3_se3, + qup3_se4, qup3_se5, qup4_se0, qup4_se1, qup4_se2, qup4_se3_01, + qup4_se3_23, qup4_se3_l3, qup4_se4_01, qup4_se4_23, qup4_se4_l3, + rng_rosc, sd_write_protect, sdc4_clk, sdc4_cmd, sdc4_data, + sys_throttle, tb_trig_sdc, tmess_rng, tsense_clm, tsense_pwm, + uim0, uim1, usb0_hs, usb_phy, vfr, vsense_trigger_mirnat, + wcn_sw_ctrl ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@f100000 { + compatible = "qcom,hawi-tlmm"; + reg = <0x0f100000 0x300000>; + interrupts = <GIC_ESPI 272 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 227>; + interrupt-controller; + #interrupt-cells = <2>; + + qup-uart7-state { + pins = "gpio62", "gpio63"; + function = "qup1_se7"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5210-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5210-tlmm.yaml new file mode 100644 index 000000000000..12c5e76235a3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5210-tlmm.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5210-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ5210 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5210 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,ipq5210-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 27 + + gpio-line-names: + maxItems: 54 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq5210-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq5210-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq5210-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-4][0-9]|5[0-3])$" + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char_start, atest_char_status0, atest_char_status1, + atest_char_status2, atest_char_status3, atest_tic_en, audio_pri, + audio_pri_mclk_out0, audio_pri_mclk_in0, audio_pri_mclk_out1, + audio_pri_mclk_in1, audio_pri_mclk_out2, audio_pri_mclk_in2, + audio_pri_mclk_out3, audio_pri_mclk_in3, audio_sec, + audio_sec_mclk_out0, audio_sec_mclk_in0, audio_sec_mclk_out1, + audio_sec_mclk_in1, audio_sec_mclk_out2, audio_sec_mclk_in2, + audio_sec_mclk_out3, audio_sec_mclk_in3, core_voltage_0, + cri_trng0, cri_trng1, cri_trng2, cri_trng3, dbg_out_clk, dg_out, + gcc_plltest_bypassnl, gcc_plltest_resetn, gcc_tlmm, gpio, led0, + led1, led2, mdc_mst, mdc_slv0, mdc_slv1, mdc_slv2, mdio_mst, + mdio_slv0, mdio_slv1, mdio_slv2, mux_tod_out, pcie0_clk_req_n, + pcie0_wake, pcie1_clk_req_n, pcie1_wake, pll_test, + pon_active_led, pon_mux_sel, pon_rx, pon_rx_los, pon_tx, + pon_tx_burst, pon_tx_dis, pon_tx_fault, pon_tx_sd, gpn_rx_los, + gpn_tx_burst, gpn_tx_dis, gpn_tx_fault, gpn_tx_sd, pps, pwm0, + pwm1, pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a, + qdss_tracedata_a, qrng_rosc0, qrng_rosc1, qrng_rosc2, + qspi_data, qspi_clk, qspi_cs_n, qup_se0, qup_se1, qup_se2, + qup_se3, qup_se4, qup_se5, qup_se5_l1, resout, rx_los0, rx_los1, + rx_los2, sdc_clk, sdc_cmd, sdc_data, tsens_max ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5210-tlmm"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 54>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <0x2>; + + qup-uart1-default-state { + pins = "gpio38", "gpio39"; + function = "qup_se1"; + drive-strength = <6>; + bias-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml index 619341dd637c..30f93b8159fd 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml @@ -27,6 +27,14 @@ properties: gpio-ranges: maxItems: 1 + gpio-reserved-ranges: + minItems: 1 + maxItems: 30 + description: + Pins can be reserved for trusted applications or for LPASS, thereby + inaccessible from the OS. This property can be used to mark the pins + which resources should not be accessed by the OS. + required: - gpio-controller - "#gpio-cells" diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..73e84f188591 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Milos SoC LPASS LPI TLMM + +maintainers: + - Luca Weiss <luca.weiss@fairphone.com> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm Milos SoC. + +properties: + compatible: + const: qcom,milos-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-milos-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-milos-lpass-state" + additionalProperties: false + +$defs: + qcom-milos-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, qca_swr_clk, + qca_swr_data, slimbus_clk, slimbus_data, swr_rx_clk, + swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk, + wsa_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> + + pinctrl@3440000 { + compatible = "qcom,milos-lpass-lpi-pinctrl"; + reg = <0x03440000 0x20000>, + <0x034d0000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", + "audio"; + + tx-swr-active-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <4>; + slew-rate = <1>; + bias-disable; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..c76ad70e6b9f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-lpass-lpi-pinctrl.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM670 SoC LPASS LPI TLMM + +maintainers: + - Richard Acayan <mailingradian@gmail.com> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SDM670 SoC. + +properties: + compatible: + const: qcom,sdm670-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm670-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm670-lpass-state" + additionalProperties: false + +$defs: + qcom-sdm670-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-9]|3[0-1])$" + + function: + enum: [ gpio, comp_rx, dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, + i2s1_clk, i2s_data, i2s_ws, lpi_cdc_rst, mclk0, pdm_rx, + pdm_sync, pdm_tx, slimbus_clk ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + lpi_tlmm: pinctrl@62b40000 { + compatible = "qcom,sdm670-lpass-lpi-pinctrl"; + reg = <0x62b40000 0x20000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 32>; + + cdc_comp_default: cdc-comp-default-state { + pins = "gpio22", "gpio24"; + function = "comp_rx"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml index e7565592da86..541c1c54ddb0 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml @@ -15,7 +15,13 @@ description: properties: compatible: - const: qcom,sm8450-lpass-lpi-pinctrl + oneOf: + - const: qcom,sm8450-lpass-lpi-pinctrl + - items: + - enum: + - qcom,qcs8300-lpass-lpi-pinctrl + - qcom,sa8775p-lpass-lpi-pinctrl + - const: qcom,sm8450-lpass-lpi-pinctrl reg: items: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml index 74df912e60ad..1bf08860a4ba 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml @@ -19,7 +19,9 @@ properties: oneOf: - const: qcom,sm8650-lpass-lpi-pinctrl - items: - - const: qcom,sm8750-lpass-lpi-pinctrl + - enum: + - qcom,glymur-lpass-lpi-pinctrl + - qcom,sm8750-lpass-lpi-pinctrl - const: qcom,sm8650-lpass-lpi-pinctrl reg: diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml index 90bd49d87d2e..2a640e495cc7 100644 --- a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml @@ -135,8 +135,11 @@ patternProperties: realtek,duty-cycle: description: | - An integer describing the level to adjust output duty cycle, controlling - the proportion of positive and negative waveforms in nanoseconds. + An integer describing the level to adjust the output pulse width, it + provides a fixed nanosecond-level adjustment to the rising/falling + edges of an existing signal. It is used for Signal Integrity tuning + (adding/subtracting delay to fine-tune the high/low duration), rather + than generating a specific PWM frequency. Valid arguments are described as below: 0: 0ns 2: + 0.25ns diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml index b6211c8544ca..2136546adec8 100644 --- a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml @@ -134,8 +134,11 @@ patternProperties: realtek,duty-cycle: description: | - An integer describing the level to adjust output duty cycle, controlling - the proportion of positive and negative waveforms in nanoseconds. + An integer describing the level to adjust the output pulse width, it + provides a fixed nanosecond-level adjustment to the rising/falling + edges of an existing signal. It is used for Signal Integrity tuning + (adding/subtracting delay to fine-tune the high/low duration), rather + than generating a specific PWM frequency. Valid arguments are described as below: 0: 0ns 2: + 0.25ns diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml index e88bc649cc73..e8ea1362b16d 100644 --- a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml @@ -133,8 +133,11 @@ patternProperties: realtek,duty-cycle: description: | - An integer describing the level to adjust output duty cycle, controlling - the proportion of positive and negative waveforms in nanoseconds. + An integer describing the level to adjust the output pulse width, it + provides a fixed nanosecond-level adjustment to the rising/falling + edges of an existing signal. It is used for Signal Integrity tuning + (adding/subtracting delay to fine-tune the high/low duration), rather + than generating a specific PWM frequency. Valid arguments are described as below: 0: 0ns 2: + 0.25ns diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1625-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1625-pinctrl.yaml new file mode 100644 index 000000000000..9562a043707e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1625-pinctrl.yaml @@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2025 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1625-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD1625 Pin Controller + +maintainers: + - Tzuyi Chang <tychang@realtek.com> + - Yu-Chun Lin <eleanor.lin@realtek.com> + +description: + The Realtek DHC RTD1625 is a high-definition media processor SoC. The + RTD1625 pin controller is used to control pin function, pull-up/down + resistors, drive strength, slew rate, Schmitt trigger, power source + (I/O output voltage), input threshold domain selection and a higher-VIL mode. + +properties: + compatible: + items: + - enum: + - realtek,rtd1625-iso-pinctrl + - realtek,rtd1625-main2-pinctrl + - realtek,rtd1625-isom-pinctrl + - realtek,rtd1625-ve4-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pins: + items: + enum: [gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, + gpio_7, gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, gpio_13, + gpio_14, gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, gpio_20, + gpio_21, gpio_22, gpio_23, gpio_24, gpio_25, gpio_28, gpio_29, + gpio_30, gpio_31, gpio_32, gpio_33, gpio_34, gpio_35, gpio_40, + gpio_41, gpio_42, gpio_43, gpio_44, gpio_45, gpio_46, gpio_47, + gpio_48, gpio_49, gpio_50, gpio_51, gpio_52, gpio_53, gpio_54, + gpio_55, gpio_56, gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, + gpio_62, gpio_63, gpio_64, gpio_65, gpio_66, gpio_67, gpio_80, + gpio_81, gpio_82, gpio_83, gpio_84, gpio_85, gpio_86, gpio_87, + gpio_88, gpio_89, gpio_90, gpio_91, gpio_92, gpio_93, gpio_94, + gpio_95, gpio_96, gpio_97, gpio_98, gpio_99, gpio_100, + gpio_101, gpio_102, gpio_103, gpio_104, gpio_105, gpio_106, + gpio_107, gpio_108, gpio_109, gpio_110, gpio_111, gpio_112, + gpio_128, gpio_129, gpio_130, gpio_131, gpio_132, gpio_133, + gpio_134, gpio_135, gpio_136, gpio_137, gpio_138, gpio_139, + gpio_140, gpio_141, gpio_142, gpio_143, gpio_144, gpio_145, + gpio_146, gpio_147, gpio_148, gpio_149, gpio_150, gpio_151, + gpio_152, gpio_153, gpio_154, gpio_155, gpio_156, gpio_157, + gpio_158, gpio_159, gpio_160, gpio_161, gpio_162, gpio_163, + gpio_164, gpio_165, ai_i2s1_loc, ao_i2s1_loc, arm_trace_dbg_en, + csi_vdsel, ejtag_acpu_loc, ejtag_aucpu0_loc, ejtag_aucpu1_loc, + ejtag_pcpu_loc, ejtag_scpu_loc, ejtag_ve2_loc, emmc_clk, + emmc_cmd, emmc_data_0, emmc_data_1, emmc_data_2, emmc_data_3, + emmc_data_4, emmc_data_5, emmc_data_6, emmc_data_7, + emmc_dd_sb, emmc_rst_n, etn_phy_loc, hif_clk, hif_data, + hif_en, hif_rdy, hi_width, i2c6_loc, ir_rx_loc, rgmii_vdsel, + sf_en, spdif_in_mode, spdif_loc, uart0_loc, usb_cc1, usb_cc2, + ve4_uart_loc] + + function: + enum: [gpio, ai_i2s0, ai_i2s2, ai_tdm0, ai_tdm1, ai_tdm2, ao_i2s0, + ao_i2s2, ao_tdm0, ao_tdm1, ao_tdm2, csi0, csi1, csi_1v2, csi_1v8, + csi_2v5, csi_3v3, dmic0, dmic1, dmic2, dptx_hpd, edptx_hdp, emmc, + gspi0, gspi1, gspi2, hi_width_1bit, hi_width_disable, i2c0, i2c1, + i2c3, i2c4, i2c5, i2c7, iso_tristate, pcie0, pcie1, pcm, pctrl, + pwm4, pwm5, pwm6, rgmii, rgmii_1v2, rgmii_1v8, rgmii_2v5, + rgmii_3v3, rmii, sd, sdio, sf_disable, sf_enable, + spdif_in_coaxial, spdif_in_gpio, spdif_out, spi, ts0, ts1, uart1, + uart2, uart3, uart4, uart5, uart6, uart7, uart8, uart9, uart10, + usb_cc1, usb_cc2, vi0_dtv, vi1_dtv, vtc_ao_i2s, vtc_dmic, + vtc_i2s, ai_i2s1_loc0, ai_i2s1_loc1, ao_i2s0_loc0, ao_i2s0_loc1, + ao_i2s1_loc0, ao_i2s1_loc1, ao_tdm1_loc0, ao_tdm1_loc1, + etn_led_loc0, etn_led_loc1, etn_phy_loc0, etn_phy_loc1, + i2c6_loc0, i2c6_loc1, ir_rx_loc0, ir_rx_loc1, pwm0_loc0, + pwm0_loc1, pwm0_loc2, pwm0_loc3, pwm1_loc0, pwm1_loc1, pwm2_loc0, + pwm2_loc1, pwm3_loc0, pwm3_loc1, spdif_loc0, spdif_loc1, + uart0_loc0, uart0_loc1, ve4_uart_loc0, ve4_uart_loc1, + ve4_uart_loc2, acpu_ejtag_loc0, acpu_ejtag_loc1, acpu_ejtag_loc2, + aucpu0_ejtag_loc0, aucpu0_ejtag_loc1, aucpu0_ejtag_loc2, + aucpu1_ejtag_loc0, aucpu1_ejtag_loc1, aucpu1_ejtag_loc2, + aupu0_ejtag_loc1, aupu1_ejtag_loc1, gpu_ejtag_loc0, + pcpu_ejtag_loc0, pcpu_ejtag_loc1, pcpu_ejtag_loc2, + scpu_ejtag_loc0, scpu_ejtag_loc1, scpu_ejtag_loc2, + ve2_ejtag_loc0, ve2_ejtag_loc1, ve2_ejtag_loc2, pll_test_loc0, + pll_test_loc1, dbg_out1, isom_dbg_out, arm_trace_debug_disable, + arm_trace_debug_enable] + + drive-strength: + enum: [4, 8] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + input-voltage-microvolt: + description: | + Select the input receiver voltage domain for the pin. + Valid arguments are: + - 1800000: 1.8V input logic level + - 3300000: 3.3V input logic level + enum: [1800000, 3300000] + + drive-push-pull: true + + power-source: + description: | + Valid arguments are described as below: + 0: power supply of 1.8V + 1: power supply of 3.3V + enum: [0, 1] + + slew-rate: + description: | + Valid arguments are described as below: + 1: ~1ns falling time + 10: ~10ns falling time + 20: ~20ns falling time + 30: ~30ns falling time + enum: [1, 10, 20, 30] + + realtek,drive-strength-p: + description: | + Some of pins can be driven using the P-MOS and N-MOS transistor to + achieve finer adjustments. The block-diagram representation is as + follows: + VDD + | + ||--+ + +-----o|| P-MOS-FET + | ||--+ + IN --+ +----- out + | ||--+ + +------|| N-MOS-FET + ||--+ + | + GND + The driving strength of the P-MOS/N-MOS transistors impacts the + waveform's rise/fall times. Greater driving strength results in + shorter rise/fall times. Each P-MOS and N-MOS transistor offers + 8 configurable levels (0 to 7), with higher values indicating + greater driving strength, contributing to achieving the desired + speed. + + The realtek,drive-strength-p is used to control the driving strength + of the P-MOS output. + + This value is not a simple count of transistors. Instead, it + represents a weighted configuration. There is a base driving + capability (even at value 0), and each bit adds a different weight to + the total strength. The resulting current is non-linear and varies + significantly based on the IO voltage (1.8V vs 3.3V) and the specific + pad group. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,drive-strength-n: + description: | + Similar to the realtek,drive-strength-p, the realtek,drive-strength-n + is used to control the driving strength of the N-MOS output. + + This property uses the same weighted configuration logic where values + 0-7 represent non-linear strength adjustments rather than a transistor + count. + + Higher values indicate greater driving strength, resulting in shorter + fall times. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,duty-cycle: + description: | + An integer describing the level to adjust the output pulse width, it + provides a fixed nanosecond-level adjustment to the rising/falling + edges of an existing signal. It is used for Signal Integrity tuning + (adding/subtracting delay to fine-tune the high/low duration), rather + than generating a specific PWM frequency. + + Valid arguments are described as below: + 0: 0ns + 2: + 0.25ns + 3: + 0.5ns + 4: -0.25ns + 5: -0.5ns + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 2, 3, 4, 5] + + realtek,high-vil-microvolt: + description: | + The threshold value for the input receiver's LOW recognition (VIL). + + This property is used to address specific HDMI I2C compatibility + issues where some sinks (TVs) have weak pull-down capabilities and + fail to pull the bus voltage below the standard VIL threshold + (~0.7V). + + Setting this property to 1100000 (1.1V) enables a specialized input + receiver mode that raises the effective VIL threshold to improve + detection. + enum: [1100000] + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@4e000 { + compatible = "realtek,rtd1625-iso-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <2>; + realtek,drive-strength-n = <2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,r9a09g077-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,r9a09g077-pinctrl.yaml index f049013a4e0c..63993b20524f 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,r9a09g077-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,r9a09g077-pinctrl.yaml @@ -83,6 +83,23 @@ definitions: input: true input-enable: true output-enable: true + bias-disable: true + bias-pull-down: true + bias-pull-up: true + input-schmitt-enable: true + input-schmitt-disable: true + slew-rate: + description: 0 is slow slew rate, 1 is fast slew rate + enum: [0, 1] + drive-strength-microamp: + description: | + Four discrete levels are supported (via registers DRCTLm), corresponding + to the following nominal values: + - 2500 (Low strength) + - 5000 (Middle strength) + - 9000 (High strength) + - 11800 (Ultra High strength) + enum: [2500, 5000, 9000, 11800] oneOf: - required: [pinmux] - required: [pins] diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index 76e607281716..9b3cbeb54fed 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -50,6 +50,7 @@ properties: - rockchip,rk3568-pinctrl - rockchip,rk3576-pinctrl - rockchip,rk3588-pinctrl + - rockchip,rv1103b-pinctrl - rockchip,rv1108-pinctrl - rockchip,rv1126-pinctrl |